TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Vendor Name: Titan Machinery Inc. Contact Person: Fred Senger & Andy Bethel Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo, ND 58078 Phone #: 952-445-5400 Toll Free #: 800-795-9275 Fax #: 952-445-0365 Email Address: fred.senger@titanmachinery.com Version of Excel used: 2007 Spec # Information Requested Answer 1.0 Make & Model New Holland Price for base unit $59,848.00 Tier 3, 3i, or 4? Tier 4 Engine HP gross/net (SAE) Aspiration Transmission, type and number of forward and reverse gears Hydraulic pump (GPM and PSI) GPM for backhoe GPM for loader Brakes Steering Drive Axles Front tires, size and type Rear tires, size and type 97 hp. / 95 hp. Turbocharged Power Shuttle 4x4 40 gpm. / 3,045 psi 40 gpm. 40 gpm. Wet Disc Hydrostatic Double Reduction 11L x 16, 10 pr. F3 19.5 x 24 10 pr. R4 Backhoe digging depth (SAE) (Standard stick) 14' 6" Backhoe digging depth 2' flat bottom (SS) 14' 5" Backhoe reach from swing pivot at ground line (SS) 17' Backhoe loading height (SS) Backhoe loading reach (SS) Backhoe digging depth (SAE) (Retracted extendable stick) 11'9" 4'6" 15'1" Backhoe digging depth (SAE) (Extended extendable stick) 18' 5"
TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Backhoe digging depth 2' flat bottom (RES) 14' 11" Backhoe digging depth 2' flat bottom (EES) 18' 4" Backhoe reach from swing pivot at ground line (RES) Backhoe reach from swing pivot at ground line (EES) Backhoe loading height (RES) Backhoe loading height (EES) 17'6" 20'7" 12'1" 14'3" Backhoe loading reach (RES) 5' 2" Backhoe loading reach (EES) Loader capacity (SAE) standard bucket 7'5" 1.1 cu. Yd. Loader standard bucket width 88" Loader maximum operating height 14' 0" Loader lift capacity at maximum height Loader breakout force 11,118 lbs. 14,253 lbf. Loader maximum hinge pin height 11' 5" Loader dump reach at maximum height 2' 5" Loader maximum bucket roll back at ground level 39 degrees Loader digging depth, with bucket flat 4" Lights, front/rear 2/2 Gauges Warranty Term (months, years) Electric Instrumentation 12 months
TRACTOR: LOADER-BACKHOE VENDOR NAME Titan Machinery Inc. MAKE AND MODEL New Holland B95C Spec # Description Price 1.0 Price for base unit: $ 59,848.00 2.0 OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers 2.1 Air conditioning (factory) $ 1,484.00 2.2 Upgrade seat, Air ride $ 796.00 2.3 Upgrade seat belt, 3" $ 60.00 2.4 Fire extinguisher $ 120.00 2.5 ROP - FOBS - less cab $ (3,954.00) 2.6 Radio AM/FM $ 530.00 2.7 Speedometer $ 175.00 2.8 Tilt Steering Wheel $ 301.00 3.0 ELECTRICAL Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers 3.1 Beacon $ 275.00 3.2 Strobe $ 400.00 4.0 POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers 4.1 Power Shift Transmission, Cab & 4 WD only $ 2,851.00 5.0 AXLES & TIRE OPTIONS
Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers Front Wheel Assist Front Tires 2-Wheel Drive Front Tires 5.1 11Lx16,10 Ply Front,19.5Lx24,10 Ply,R4 Rear IN BASE Front Wheel Assist Front Tires 5.2 12-16.5 Galaxy IN BASE 5.3 14-17.5 Galaxy $ 396.00 5.4 12-16.5 Hulk Galaxy $ 879.00 5.5 12.5-8018 Beefy Baby, (requires 19.5L-24 rear tire) $ 1,210.00 Rear Tires 5.6 19.5L-24 EZ Rider Galaxy IN BASE 5.7 21L-24 EZ Rider Galaxy $ 239.00 5.8 16.9-28 EZ Rider Galaxy $ 425.00 5.9 19.5L-24 Jumbo Hulk Galaxy (4 WD Only) $ 2,552.00 5.10 Front Wheel Assist w/ 12x16.5 F, 19.5x24 R Tires $ 8,267.00 6.0 HYDRAULICS Use this section to offer hydraulic options. Number items starting with 6.1, 6.2, etc. Use as many numbers 6.1 Loader auxiliary valve, factory $ 935.00 145 6.2 One way hammer valve, factory $ 1,655.00 with pipes to end of boom and flow control 6.3 Hand tool circuit, factory (includes flow control) $ 1,041.00 6.4 Stabilizer control w/auto Up (pilot control units only) $ 148.00 7.0 BACKHOE OPTIONS Use this section to offer backhoe options. Number items starting with 7.1, 7.2, etc. Use as many numbers 7.1 Pilot Control 2 Lever, $ 2,265.00 7.2 4 Lever controls - mechanical control models only $ 376.00 7.3 2 Lever ISO Controls - (Exc Pattern) - Mech. Control $ 376.00 7.4 models only 7.5 Reversible Stabilizer Pads $ 526.00 7.6 Backhoe quick-coupler ( Manual New Holland ) $ 851.00 7.7 Mechanical Quick Coupler WB $ 1,815.00 7.8 HYDQT-3MN Hydraulic WB coupler $ 5,492.00 7.9 Coupler Pin Kit (WB) $ 307.00 7.10 Standard Dipperstick (4.42 M) In Price 7.11 Standard Dipperstick (4.72 M) $ 1,770.00 7.12 Extendable dipper stick, (4.42 M) add heavy counterweight $ 4,026.00 7.13 Extendable dipper stick, (4.72 M) add heavy counterweight $ 5,797.00 7.14 12" Hi-Capacity HD Bucket, 3.9 cu. Ft. w/ 3 teeth $ 703.00 7.15 18" Hi-Capacity HD Bucket, 5.6 cu. Ft. w/ 4 teeth $ 794.00 7.16 24" Hi-Capacity HD Bucket, 8.5 cu. Ft. w/ 4 teeth $ 855.00
7.17 30" Hi-Capacity HD Bucket, 10.9 cu. Ft. w/ 5 teeth $ 968.00 7.18 36" Hi-Capacity HD Bucket, 13.8 cu. Ft. w/ 6 teeth $ 1,068.00 7.19 18" Severe Duty Bucket, 8.5 cu. Ft. w/ 4 teeth $ 915.00 7.20 24" Standard Duty Bucket, 7.5 cu. Ft. w/ 5 teeth $ 815.00 8.0 FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers 8.1 New Holland 88" bucket 1.1 cu. Yd. In price 8.2 New Holland 88" bucket 1.3 cu. Yd. $ 530.00 8.3 New Holland 4 and 1 bucket with bolt on edge, Add $ 1,357.00 Auxiliary Hydraulics 8.4 New Holland flip over forks with 1.3 cu. Yd. Bucket $ 708.00 Hydraulics 8.5 Bucket lift hooks, each $ 275.00 8.6 FFC Hydraulic Quick Coupler $ 3,881.00 8.7 FFC Hose and QD kit $ 575.00 8.8 FFC Manual Quick Coupler $ 2,388.00 8.9 FFC 1.3 cu yd Bucket $ 2,723.00 8.10 FFC 90" 4 x 1 Bucket, Add Auxiliary Hydraulics $ 7,127.00 8.11 FFC 83" Heavy Duty Scrap Grapple Bucket $ 7,365.00
TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Vendor Name: Titan Machinery Inc. Contact Person: Fred Senger & Andy Bethel Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo, ND 58078 Phone #: 952-445-5400 Toll Free #: 800-795-9275 Fax #: 952-445-0365 Email Address: fred.senger@titanmachinery.com Version of Excel used: 2007 Spec # Information Requested Answer 1.0 Make & Model New Holland B95C TC Price for base unit $67,661.00 Tier 3, 3i, or 4? Tier 4 Engine HP gross/net (SAE) Aspiration Transmission, type and number of forward and reverse gears Hydraulic pump (GPM and PSI) GPM for backhoe GPM for loader Brakes Steering Drive Axles Front tires, size and type Rear tires, size and type 97 hp. / 95 hp. Turbocharged Power Shuttle 4x4 40 gpm. / 3,045 psi 40 gpm. 40 gpm. Wet Disc Hydrostatic Double Reduction 11L x 16, 10 pr. F3 19.5 x 24 10 pr. R4 Backhoe digging depth (SAE) (Standard stick) 14' 6" Backhoe digging depth 2' flat bottom (SS) 14' 5" Backhoe reach from swing pivot at ground line (SS) 17' Backhoe loading height (SS) Backhoe loading reach (SS) Backhoe digging depth (SAE) (Retracted extendable stick) 11'9" 4'6" 15'1" Backhoe digging depth (SAE) (Extended extendable stick) 18' 5"
TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Backhoe digging depth 2' flat bottom (RES) 14' 11" Backhoe digging depth 2' flat bottom (EES) 18' 4" Backhoe reach from swing pivot at ground line (RES) Backhoe reach from swing pivot at ground line (EES) Backhoe loading height (RES) Backhoe loading height (EES) 17'6" 20'7" 12'1" 14'3" Backhoe loading reach (RES) 5' 2" Backhoe loading reach (EES) Loader capacity (SAE) standard bucket 7'5" 1.3 cu. Yd. Loader standard bucket width 88" Loader maximum operating height 13' 11" Loader lift capacity at maximum height Loader breakout force 8,610 lbs. 14,712 lbf. Loader maximum hinge pin height 11' 4" Loader dump reach at maximum height 2' 9" Loader maximum bucket roll back at ground level 43 degrees Loader digging depth, with bucket flat 5" Lights, front/rear 2/2 Gauges Warranty Term (months, years) Electric Instrumentation 12 months
TRACTOR: LOADER-BACKHOE VENDOR NAME Titan Machinery Inc. MAKE AND MODEL New Holland B95C TC Spec # Description Price 1.0 Price for base unit: $ 67,661.00 2.0 OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers 2.1 Air conditioning (factory) $ 1,484.00 2.2 Upgrade seat, Air ride $ 796.00 2.3 Upgrade seat belt, 3" $ 60.00 2.4 Fire extinguisher $ 120.00 2.5 ROP - FOBS - less cab $ (3,954.00) 2.6 Radio AM/FM $ 530.00 2.7 Speedometer $ 175.00 2.8 Tilt Steering Wheel $ 301.00 3.0 ELECTRICAL Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers 3.1 Beacon $ 275.00 3.2 Strobe $ 400.00 4.0 POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers 4.1 Power Shift Transmission, Cab & 4 WD only $ 2,851.00 5.0 AXLES & TIRE OPTIONS
Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers Front Wheel Assist Front Tires 5.1 12-16.5 Galaxy IN BASE 5.2 14-17.5 Galaxy $ 396.00 5.3 12-16.5 Hulk Galaxy $ 879.00 5.4 12.5-8018 Beefy Baby, (requires 19.5L-24 rear tire) $ 1,210.00 Rear Tires 5.5 19.5L-24 EZ Rider Galaxy IN BASE 5.6 21L-24 EZ Rider Galaxy $ 239.00 5.7 16.9-28 EZ Rider Galaxy $ 425.00 5.8 19.5L-24 Jumbo Hulk Galaxy (4 WD Only) $ 2,552.00 5.9 Front Wheel Assist w/ 12x16.5 F, 19.5x24 R Tires $ 8,267.00 6.0 HYDRAULICS Use this section to offer hydraulic options. Number items starting with 6.1, 6.2, etc. Use as many numbers 6.1 Loader auxiliary valve, factory $ 935.00 145 6.2 One way hammer valve, factory $ 1,655.00 with pipes to end of boom and flow control 6.3 Hand tool circuit, factory (includes flow control) $ 1,041.00 6.4 Stabilizer control w/auto Up (pilot control units only) $ 148.00 7.0 BACKHOE OPTIONS Use this section to offer backhoe options. Number items starting with 7.1, 7.2, etc. Use as many numbers 7.1 Pilot Control 2 Lever, $ 2,265.00 7.2 4 Lever controls - mechanical control models only $ 376.00 7.3 2 Lever ISO Controls - (Exc Pattern) - Mech. Control $ 376.00 7.4 models only 7.5 Reversible Stabilizer Pads $ 526.00 7.6 Backhoe quick-coupler ( Manual New Holland ) $ 851.00 7.7 Mechanical Quick Coupler WB $ 1,815.00 7.8 HYDQT-3MN Hydraulic WB coupler $ 5,492.00 7.9 Coupler Pin Kit (WB) $ 307.00 7.10 Standard Dipperstick (4.42 M) In Price 7.11 Extendable dipper stick, (4.42 M) add heavy counterweight $ 4,026.00 7.12 12" Hi-Capacity HD Bucket, 3.9 cu. Ft. w/ 3 teeth $ 703.00 7.13 18" Hi-Capacity HD Bucket, 5.6 cu. Ft. w/ 4 teeth $ 794.00 7.14 24" Hi-Capacity HD Bucket, 8.5 cu. Ft. w/ 4 teeth $ 855.00
7.15 30" Hi-Capacity HD Bucket, 10.9 cu. Ft. w/ 5 teeth $ 968.00 7.16 36" Hi-Capacity HD Bucket, 13.8 cu. Ft. w/ 6 teeth $ 1,068.00 7.17 18" Severe Duty Bucket, 8.5 cu. Ft. w/ 4 teeth $ 915.00 7.18 24" Standard Duty Bucket, 7.5 cu. Ft. w/ 5 teeth $ 815.00 8.0 FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers 8.1 New Holland 88" bucket 1.3 cu. Yd. $ 530.00 8.2 New Holland 4 and 1 bucket with bolt on edge, Add $ 1,357.00 Auxiliary Hydraulics 8.3 New Holland flip over forks with 1.3 cu. Yd. Bucket $ 708.00 Hydraulics 8.4 Bucket lift hooks, each $ 275.00 8.5 FFC Hydraulic Quick Coupler $ 3,881.00 8.6 FFC Hose and QD kit $ 575.00 8.7 FFC Manual Quick Coupler $ 2,388.00 8.8 FFC 1.3 cu yd Bucket $ 2,723.00 8.9 FFC 90" 4 x 1 Bucket, Add Auxiliary Hydraulics $ 7,127.00 8.10 FFC 83" Heavy Duty Scrap Grapple Bucket $ 7,365.00
TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Vendor Name: Titan Machinery Inc. Contact Person: Fred Senger & Andy Bethel Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo, ND 58078 Phone #: 952-445-5400 Toll Free #: 800-795-9275 Fax #: 952-445-0365 Email Address: fred.senger@titanmachinery.com Version of Excel used: 2007 Spec # Information Requested Answer 1.0 Make & Model New Holland B110C Price for base unit $77,036.00 Tier 3, 3i, or 4? Tier 4 Engine HP gross/net (SAE) Aspiration Transmission, type and number of forward and reverse gears Hydraulic pump (GPM and PSI) GPM for backhoe GPM for loader Brakes Steering Drive Axles Front tires, size and type Rear tires, size and type 110 hp. / 108 hp. Turbocharged Power Shuttle 4x4 40 gpm. / 3,045 psi 40 gpm. 40 gpm. Wet Disc Hydrostatic Double Reduction 12 x 16.5, 8 Ply, FWD 19.5 x 24, 10 Ply,R4 Backhoe digging depth (SAE) (Standard stick) 15' 6" Backhoe digging depth 2' flat bottom (SS) 15' 5" Backhoe reach from swing pivot at ground line (SS) 17' 11" Backhoe loading height (SS) 12' 4" Backhoe loading reach (SS) 5' 4" Backhoe digging depth (SAE) (Retracted extendable stick) 15' 6" Backhoe digging depth (SAE) (Extended extendable stick) 18' 11"
TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Backhoe digging depth 2' flat bottom (RES) 15' 5" Backhoe digging depth 2' flat bottom (EES) 18' 10" Backhoe reach from swing pivot at ground line (RES) 17' 11" Backhoe reach from swing pivot at ground line (EES) 21' Backhoe loading height (RES) 12' 4" Backhoe loading height (EES) 14' 6" Backhoe loading reach (RES) 5' 2" Backhoe loading reach (EES) 7' 10" Loader capacity (SAE) standard bucket 1.3 cu. Yd. Loader standard bucket width 88" Loader maximum operating height 14' 2" Loader lift capacity at maximum height Loader breakout force 10,957 lbs. 14,253 lbf. Loader maximum hinge pin height 11' 5" Loader dump reach at maximum height 2' 4" Loader maximum bucket roll back at ground level 39 degrees Loader digging depth, with bucket flat 4" Lights, front/rear 2/2 Gauges Warranty Term (months, years) Electric Instrumentation 12 months
TRACTOR: LOADER-BACKHOE VENDOR NAME Titan Machinery Inc. MAKE AND MODEL New Holland B110C Spec # Description Price 1.0 Price for base unit: $ 77,036.00 2.0 OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers 2.1 Air conditioning (factory) $ 1,484.00 2.2 Upgrade seat, Air ride $ 796.00 2.3 Upgrade seat belt, 3" $ 60.00 2.4 Fire extinguisher $ 120.00 2.5 ROP - FOBS - less cab $ (3,954.00) 2.6 Radio AM/FM $ 530.00 2.7 Speedometer $ 175.00 2.8 Tilt Steering Wheel $ 301.00 3.0 ELECTRICAL Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers 3.1 Beacon $ 275.00 3.2 Strobe $ 400.00 4.0 POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers 4.1 Power Shift Transmission, Cab & 4 WD only $ 2,851.00 5.0 AXLES & TIRE OPTIONS
Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers Front Wheel Assist Front Tires 5.1 12-16.5 Galaxy IN BASE 5.2 14-17.5 Galaxy $ 396.00 5.3 12-16.5 Hulk Galaxy $ 879.00 5.4 12.5-8018 Beefy Baby, (requires 19.5L-24 rear tire) $ 1,210.00 Rear Tires 5.5 19.5L-24 EZ Rider Galaxy IN BASE 5.6 21L-24 EZ Rider Galaxy $ 239.00 5.7 16.9-28 EZ Rider Galaxy $ 425.00 5.8 19.5L-24 Jumbo Hulk Galaxy (4 WD Only) $ 2,552.00 5.9 Two Wheel,' Pilot, Cab Only, Deduct $ (7,567.00) 6.0 HYDRAULICS Use this section to offer hydraulic options. Number items starting with 6.1, 6.2, etc. Use as many numbers 6.1 Loader auxiliary valve, factory $ 935.00 145 6.2 One way hammer valve, factory $ 1,655.00 with pipes to end of boom and flow control 6.3 Hand tool circuit, factory (includes flow control) $ 1,041.00 6.4 Stabilizer control w/auto Up (pilot control units only) $ 148.00 7.0 BACKHOE OPTIONS Use this section to offer backhoe options. Number items starting with 7.1, 7.2, etc. Use as many numbers 7.1 Pilot Control 2 Lever, $ 2,265.00 7.2 4 Lever controls - mechanical control models only $ 376.00 7.3 2 Lever ISO Controls - (Exc Pattern) - Mech. Control $ 376.00 7.4 models only 7.5 Reversible Stabilizer Pads STD 7.6 Backhoe quick-coupler ( Manual New Holland ) $ 851.00 7.7 Mechanical Quick Coupler WB $ 1,815.00 7.8 HYDQT-3MN Hydraulic WB coupler $ 5,492.00 7.9 Coupler Pin Kit (WB) $ 307.00 7.10 Standard Dipperstick (4.72 M) In Price 7.11 Extendable dipper stick, (4.72 M) add heavy counterweight $ 5,797.00 7.12 12" Hi-Capacity HD Bucket, 3.9 cu. Ft. w/ 3 teeth $ 703.00 7.13 18" Hi-Capacity HD Bucket, 5.6 cu. Ft. w/ 4 teeth $ 794.00 7.14 24" Hi-Capacity HD Bucket, 8.5 cu. Ft. w/ 4 teeth $ 855.00
7.15 30" Hi-Capacity HD Bucket, 10.9 cu. Ft. w/ 5 teeth $ 968.00 7.16 36" Hi-Capacity HD Bucket, 13.8 cu. Ft. w/ 6 teeth $ 1,068.00 7.17 18" Severe Duty Bucket, 8.5 cu. Ft. w/ 4 teeth $ 915.00 7.18 24" Standard Duty Bucket, 7.5 cu. Ft. w/ 5 teeth $ 815.00 8.0 FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers 8.1 New Holland 88" bucket 1.3 cu. Yd. $ 530.00 8.2 New Holland 4 and 1 bucket with bolt on edge, Add $ 1,357.00 Auxiliary Hydraulics 8.3 New Holland flip over forks with 1.3 cu. Yd. Bucket $ 708.00 Hydraulics 8.4 Bucket lift hooks, each $ 275.00 8.5 FFC Hydraulic Quick Coupler $ 3,881.00 8.6 FFC Hose and QD kit $ 575.00 8.7 FFC Manual Quick Coupler $ 2,388.00 8.8 FFC 1.3 cu yd Bucket $ 2,723.00 8.9 FFC 90" 4 x 1 Bucket, Add Auxiliary Hydraulics $ 7,127.00 8.10 FFC 83" Heavy Duty Scrap Grapple Bucket $ 7,365.00