Armoured Cable/Flex. Conduit

Similar documents
Non-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings

In This Section. and. Fittings & Non-Metallic Rigid Conduit Fittings and Accessories. Steel City Fittings

Rigid Metal Conduit, IMC or EMT K-Clamps

Electrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B

Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings...

See page 59 for complete parts list for all kits.

PRODUCT CATALOG. 2010, Halex/Scott Fetzer Company TABLE OF CONTENTS. LIQUID Liquid-Tight Conduit Fittings

Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems

Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers

Switch & Outlet Boxes Technical Data

Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:

Corrosion Protection for Electrical Conduit and Fittings

Cable Connectors & Conduit Sealing Bushings

ACCESSORIES. Adaptor for ex100 spin-on ex100 UL/ULC Spin-on filter complete 10 µm, 17 gph UL/ULC Spin-on element 10micron for EX200 UL/ULC

MA-5200 Series MA-5300 Series

320A Single Phase URD Meter Loop Installations

Liquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat

UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.

One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series

Hinges. Truckline Inc. Call Us at Tel: HINGES 8-1. Truck & Trailer Body Parts Mfg. & Sales

W-Series Junction Boxes

Conduit Bushings for Rigid Metal Conduit and IMC

WIREMOLD Pancake Overfloor Raceway

Product Catalog. Rev. 612 r1

Electrical Accessories

Cable Connectors & Conduit Sealing Bushings

Arktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed

Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS

UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.

Mulberry Metal Products Seattle Stock Sheet

Number Tube I.P.S. Rod Size or O.D. Range Cable H J W

Tested and Certified for Safety 20' EMT Our 20' EMT is UL Listed. It is. manufactured in accordance with ANSI

Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS

RELOC Modular Wiring Specialty Lighting and Power Systems

NESCO NE08. Effective Date: 06/01/06

HVAC No. MFG Part No. Description Price

Note: Supply from an underground network often requires use of stud type connector. Consult your local utility.

One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series

Seismic Sensor Accessories SA, SV & ST 6000 Series

Walkerflex Modular Wiring System

PRODUCT BROCHURE. Steel City fire-rated poke-through systems

DEMANDING CONDITIONS, DEMAND THE BEST!

Floor Boxes. Flush Power and Communications. FPT4 Series Poke-Through: 4 Power and Communications. FPT4 Series Poke-Through: Covers

Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat

1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information

ELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL

Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater

STUD BOLTS. Konnect has a dedicated stud bolt facility and can. We carry bar stock and nut stock in the following material grades:

Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.

Electrical Fittings & Supplies

F E A T U R E S & B E N E F I T S. ED755R13 Updated September 2011 For latest specs visit

Juno Trac-Master Trac Lighting Systems. Comprehensive line and low voltage track systems

TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series

General Cable Support Information

4 Square Partition Square Cut Tile Wall 2 Gang Cover 2 1/8 Deep 1/2 to 1 RSD

LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT

Power Transfer Door Loops

T CLASS T FUSE BLOCKS

Ground Connectors All Copper Alloy Specification Grade

Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB

FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.

EC&N. Elbows, Couplings & Nipples

Commercial Products. New Products in the Commercial Products Product Line

Junction Boxes Hazardous and Non-Hazardous

A 120V BR GFI Recpt. Features. Material, Color, and Finish. Description

SERVICE ENTRANCE - UNDERGROUND Single & Three Phase 200, & 320/400 Amp

Class T 300 & 600 Volt Fuse Blocks F B 300 & 600V CLASS T FUSE BLOCKS RATINGS: FEATURES/BENEFITS: RECOMMENDED FUSE USAGE: CLIP & CONNECTOR TYPES

Ideal for surface mounting

CABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips

ELECTRICAL CONDUIT. EMT IMC Rigid Aluminum

BRACKETS, MOUNTS & HARDWARE

ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles

DIAL DAMPER REGULATOR SET (1/4 ) Product Data Sheet

T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat

FLAGPOLE TRUCKS & ACCESSORIES

VA-640GSX024P. Overview. Applications. Features & Benefits. Datasheet. Large Globe Valve Actuators

490 Series Actuators. 490 Series. Contents. Introduction

General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...

Building & Technology Supplies, LLC

Thin Wall Conduit Fittings (for EMT Conduit)

COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications

CP Myers Hubs. Class I, Div. 2 Class II, Div. 1 and 2 Class III. when installed in accordance with the NEC. Features. Material.

Stainless Steel Fittings

MAx-305 & MAx-318 Series MAx-405 Through MAx-419 Series Two-Position Actuators

MB-825 Flange Mounted

SUNLINE 2000 SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS FEATURES DESCRIPTION. H5CE090 & H3CE AND 10 NOMINAL TONS (World 50HZ)

Accessories. Stainless Steel Sealing Rings. Description MSR-C2. Polycarbonate Sealing Ring. Description S102WD Ring, available with any meter socket

The selection of lengths and fittings in a variety of

Control Circuits Connectors Type SK & SKW Overview

BUB400M 4-In Mog Cond Body. Features. Material, Color, and Finish. Dimensions and Weight

PROJECT: : Maysak New House Construction_Weno, Chuuk State DATE : 27 June 2016 ORDER : 23 SETS (Complete with Electrical) of the below Items

CONDUIT BODIES CONDUIT BODIES. Phone:

Quality, durability and efficiency for every electrical installation

Carbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter

Single Socket and Horizontal Metering

Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.

SturdiSignal Series. Low Profile LED Warning Signal Light. Specifications. Dimensions. Compliances

COMBINATION COVER & CARPET FLANGE

RECESSED TRACK (120V) SPECIFICATIONS

XCS-OS SERIES SPRING RETURN SELECTOR SWITCH ASSEMBLIES

Transcription:

Armoured Cable/Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI70 CI71 / CI73 CI2210 / CI2236 L-16 CI2175 One Screw Connectors (Zinc Alloy) L-16 3/8 0.12 0.63 14/2-10/2; 14/4-12/4 5/16-7/16 CI70 3/8 0.13 0.70 14/2-10/2; 14/3-10/3; 14/4-10/4 5/16-7/16 CI71 1/2 0.33 0.95 14/2-8/2; 14/3-8/3; 14/4-10/4 7/16-1/2 CI72 3/4 0.60 1.15 1/0/1-4/0/1; 8/2-4/2; 8/3-3/3; 3/4 10/4-6/4 CI73 1 0.93 1.47 1/0/1-350/1; 4/2-2/2; 6/3-2/3; 6/4-4/4 1 Duplex Connectors (Zinc Alloy) CI2175 3/8 0.15 0.65 14/2-10/2; 14/3-10/3; 14/4-12/4 3/8 90 Connectors (Zinc Alloy) CI2210 3/8 0.40 0.63 14/2-10/2; 14/3-10/3 3/8 14/4-12/4 CI2211 1/2 0.65 0.97 8/2; 8/3; 10/4 1/2 CI2214 3/4 0.77 1.12 1/0/1-4/0/1; 6/2-4/2; 8/3-3/3; 3/4 8/4-6/4 CI2216 1 1.06 1.40 4/0/1-350/1; 2/2; 4/3-2/3; 1 6/4-4/4 CI2218 1-1/4 1.34 1.65 500/1-750/1; 1/3-3/0/3; 1-1/4 1/4-1/0/4 CI2234 1-1/2 1.51 2.47 600/1-1000/1; 2/0/3-4/0/3; 1-1/2 1/4-3/0/4 CI2236 2 1.51 2.47 600/1-1000/1; 2/0/3-400/3; 1-1/2-2 1/4-4/0/4 90 Connectors (Aluminum) CI2238 2-1/2 2.50 3.08 600/3-750/3 2-1/2 CI2240 3 2.95 3.55 1000/3 3 CI4090 4 4.17 4.62 4 CI2238 / CI2240 / CI4090 Aluminum Locknut Also suitable for ACWU90 (of equivalent diameters) in dry locations. A non-ferrous connector and locknut must be used to terminate a single conductor cable when nominal current exceeds 200 AMP. NOTE: 3/8 trade size connectors require a 1/2 knockout. Technical improvements are constantly taking place in the electrical industry. The cable manufacturers are changing their products from time to time. Accordingly, it is strongly suggested that you verify the cable size with the cable manufacturer prior to selecting a connector. 5

Fittings & Accessories Grounding Armoured Cable / Flex. Conduit Connectors Trade Cat. No. Size Description XC-730 Cable Lok XC-730 * 1/2 Single Connector XC-731 1/2 Single Connector XC-732 3/4 Single Connector XC-7300 1/2 Duplex Connector * Not CSA certified XC-730 XC-731 XC-732 XC-7300 Cable Type 1/2 Single 1/2 Single 3/4 Single 1/2 Duplex Conduit / Cable Selection Guide AC Aluminum 14/2; 14/3; 14/4 14/2; 14/3; 14/4 10/4 14/2; 14/3; 14/4 12/2; 12/3; 12/4 12/2; 12/3; 12/4 8/2; 8/3 12/2; 12/3; 12/4 6/2 Flexible Conduit 3/8 3/8 1/2 3/8 Trade Clamping Range Cat. No. Size min. max. XC-890 90 Connectors (Zinc Alloy - Insulated) XC-890 3/8 0.40 0.63 XC-891 1/2 0.65 0.97 XC-892 3/4 0.77 1.12 XC-893 1 1.06 1.40 XC-894 1-1/4 1.34 1.65 XC-895 1-1/2 1.51 2.47 XC-896 2 1.51 2.47 XC-897 2-1/2 2.45 3.50 XC-898 3 3.07 4.02 XC-899 3-1/2 3.63 4.34 XC-8910 4 3.68 5.17 XC-870 Trade Clamping Range Cat. No. Size min. max. One Screw Connectors (Zinc Alloy - Insulated) XC-870 1/2 0.74 0.92 XC-872 3/4 0.88 1.10 XC-873 1 1.10 1.36 XC-874 1-1/4 1.48 1.65 XC-875 1-1/2 1.68 2.00 XC-876 2 2.12 2.47 XC-877 2-1/2 2.71 3.08 XC-878 3 3.15 3.60 XC-879 * 3-1/2 3.20 4.03 XC-8710 * 4 4.15 4.25 * Not CSA certified 6

Armoured Cable / Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI2104 / CI2116 CI2166 / CI2172 CI4000 Aluminum Locknut and Plastic Bushing CI2163 CI2173 / CI2174 / XC-278-A Two Screw Connectors (Cast Aluminum Body and Clamp) CI2104 1/2 0.45 0.59 14/2-10/2; 14/3-10/3; 14/4-12/4 5/16 ACWU90: 10/2; 12/3-10/3; 12/4; 12/5 CI2106 3/4 0.55 0.78 10/2-8/2; 10/3-8/3; 12/4-10/4 3/8-7/16 ACWU90: 3/1-2/1; 8/2; 10/3-8/3; 10/4; 12/5 CI2108 1 0.69 1.01 1/0/1-2/0/1; 8/2-6/2; 8/3-6/3; 8/4 1/2 ACWU90: 3/1-3/0/1; 6/2-4/2; 8/3-4/3; 8/4-6/4 CI2110 1-1/4 0.84 1.33 1/0/1-350/1; 6/2-2/2; 6/3-2/3; 8/4-4/4 3/4 ACWU90: 1/0/1-400/1 6/2-1/2; 6/3-2/3; 8/4-2/4 CI2112 1-1/2 1.06 1.57 4/0/1-600/1; 2/2-1/2; 4/3-2/0/3; 4/4-1/4 1 ACWU90: 4/0/1-600/1; 1/0/2-3/0/2; 4/3-2/0/3; 6/4-1/0/4 CI2116 2 1.38 2.06 500/1-1000/1; 1/0/3-300/3; 1/4-3/0/4 1-1/4,1-1/2 One Screw Connectors (Zinc Alloy) ACWU90: 500/1-1000/1; 2/0/2-350/2; 1/0/3-300/3; 1/4-4/0/4 CI2163 3/8 0.35 0.61 14/2-10/2; 14/3-10/3; 14/4-12/4 3/8 One Screw Connectors (Aluminum) CI2166 1/2 0.50 0.90 12/2-8/2; 12/3-8/3; 14/4-10/4 1/2 CI2167 3/4 0.71 1.10 1/0/1-4/0/1; 6/2-4/2; 8/3-3/3; 8/4-6/4 3/4 CI2169 1 1.16 1.50 250/1-300/1; 2/3; 4/4 1 CI2170 1-1/4 1.32 1.77 400/1-600/1; 1/2; 1/3-2/0/3; 1/4 1-1/4 CI2171 1-1/2 1.77 2.05 1000/1; 4/0/3 1-1/2 ACWU90: 1000/1; 4/0/3; 3/0/4 CI2172 2 2.10 2.54 350/3-400/3 2 Two Screw Connectors (Zinc Alloy) ACWU90: 1500/1; 500/2; 350/3-400/3; 250/4-300/4 CI2173 2-1/2 2.05 3.07 250/3-600/3; 250/4-300/4 2, 2-1/2 ACWU90: 1500/1; 500/2 CI2174 3 2.25 3.57 350/3-600/3; 4/0/4-300/4 2-1/2, 3 Two Screw Connectors (Aluminum) ACWU90: 1500/1; 500/2 CI4000 4 4.40 4.55 4 Also suitable for ACWU90 (of equivalent diameters) in dry locations. CI2104/CI2116 connectors may also be used for RA90 cables of equivalent diameters. A non-ferrous connector and locknut must be used to terminate a single conductor cable when nominal current exceeds 200 AMP. NOTE: 3/8 trade size connector require a 1/2 knockout. Technical improvements are constantly taking place in the electrical industry. The cable manufacturers are changing their products from time to time. Accordingly, it is strongly suggested that you verify the cable size with the cable manufacturer prior to selecting a connector. 7

Fittings & Accessories Grounding Armoured Cable / Flex. Conduit Accessories Trade Size Clamping Range Cat. No. E.M.T. Flex. min. max. CI5153 E.M.T / Flex. Couplings (Zinc Alloy) CI5153 1/2 3/8 0.17 0.63 CI5154 1/2 1/2 0.75 0.95 CI5154 Dimensions Hole Suggested Application Flex. Cat. No. H W Size AC90 (BX) Conduit CI0 / CI5 Cable Straps (Aluminum) CI0 0.44 0.63 3/16 14/2 CI1 0.50 0.56 3/16 12/2-10/2; 14/3-12/3; 14/4 5/16 CI2 0.50 0.63 3/16 10/3; 12/4 3/8 CI3 0.69 0.75 3/16 8/2; 8/3; 10/4 7/16 CI4 0.81 1.06 3/16 6/2; 6/3; 8/4 1/2 CI5 1.06 1.25 7/32 4/2-2/2; 4/3-2/3; 6/4-4/4 3/4 Cable Staples (Galvanized Steel) CIS-3 0.49 0.70 14/2-12/2; 14/3-12/3 5/16 CIS-4 0.76 0.86 14/2-8/2; 14/3-8/3; 3/8, 7/16 14/4-10/4 CIS-3 / CIS-4 Trade Size Max. Flex. Hole Cat. No. Conduit Dia. Size Flexible Conduit Straps (Galvanized Steel) CI38 3/8 0.61 3/16 CI38 8

Armoured Cable / Flex. Conduit Accessories Fittings & Accessories Grounding Cat. No. Application CI66 Protector Plates (Galvanized Steel) CI66 For wood stud CI66-SS For metal stud CI158-SSPB For metal stud c/w bushed opening In accordance with C.E.C. rule 12.616 CI66-SS Cat. No. AC Cable Size Size Anti-Short Bushings IT-100-SC 14/2, 14/3, 1/2 0 IT-101 14/4, 12/3, 6/1, 4/1 1 IT-102 12/4, 10/2, 10/3, 2/1 2 IT-103 10/4, 8/2, 8/3, 1/1 3 IT-104 8/4, 6/2, 6/3, 4/2, 4/3, 6/4 4 CI158-SSPB Cat. No. Trade Size IT-100-SC Combination Couplings - EMT to Flex Compression to Screw-In Type (Zinc Die Cast) TX-201 1/2 TX-202 3/4 TX-201 9

Fittings & Accessories Grounding Armoured Cable / Flex. Conduit Accessories Cat. No. KO Size Trade Size Screw-In Connectors - Insulated (Zinc Die Cast) XC-840 XC-840 1/2 3/8 XC-841 1/2 1/2 XC-842 3/4 3/4 XC-843 * 1 1 XC-844 * 1-1/4 1-1/4 XC-845 * 1-1/2 1-1/2 XC-846 * 2 2 XC-240 Screw-In Connectors (Zinc Die Cast) XC-240 1/2 3/8 XC-241 1/2 1/2 XC-242 3/4 3/4 XC-243 1 1 XC-244 1-1/4 1-1/4 XC-245 1-1/2 1-1/2 XC-246 2 2 XK-241 Screw-In Couplings (Zinc Die Cast) XK-241 1/2 1/2 XK-242 3/4 3/4 XK-243 1 1 XK-244 1-1/4 1-1/4 XK-245 1-1/2 1-1/2 XK-246 2 2 * Not CSA certified 10

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback