www.osram.us/ds PrevaLED Line High Flux The PrevaLED Line High Flux LED modules offer an innovative solution for a variety of high bay and industrial applications. The boards consist of high effi cacy LEDs in a precise layout, eliminating the need for supplemental heat sinking and delivering up to 162 lumens per watt in a variety of color temperatures. The boards produce an even, diffuse light that reduces the need for multiple optical layers, simplifying the luminaire design and maximizing optical efficiency. This board design is able to withstand tough ambient conditions and offers a long-life, energy-efficient, and economical alternative to linear fluorescent sources. The PrevaLED Line High Flux s are designed for opti mum performance when paired with OPTOTRONIC constant current power supplies for maximum system efficiency and life expectancy. Key Features & Benefits High efficacy LED modules Variation of color temperatures (2700K, 3000K, 3500K, 4000K and 5000K) High color rendering of CRI >80 and >90 Enables seamless design-in for thermally demanding applications High quality of light within 3 SDCM color consistency High lumen options for: high/low bay applications industrial applications Poke-in wire connectors Service life: Greater than 60,000 hours (L 70 ) minimizing maintenance frequency Can be optimally paired with OPTOTRONIC Constant Current LED Power Supplies for a 5-year system warranty Application Information High bay industrial Retail Specifications and Certifications The OSRAM PrevaLED Family is UL8750 Recognized for US and Canada Class 2 Units (UL File# E320662) Light is OSRAM
Ordering Information Input Operating Current Wattage Nominal Item Ordering Voltage Nominal Max. Nominal Max. Lumens Nominal Color Dimensions Case Number Abbreviation (V) (ma) (ma) (W)* (W) (lm)* LPW Temp. CRI (in) Qty 57277 PLPG3-Lin-2R-6000-827-560x40 42 915 1144 38.5 50 5610 146 2700K 80 22"x1.6" 80 57278 PLPG3-Lin-2R-6000-830-560x40 42 915 1144 38.5 50 5800 151 3000K 80 22"x1.6" 80 57279 PLPG3-Lin-2R-6000-835-560x40 42 915 1144 38.5 50 5970 155 3500K 80 22"x1.6" 80 57280 PLPG3-Lin-2R-6000-840-560x40 42 915 1144 38.5 50 6040 157 4000K 80 22"x1.6" 80 57281 PLPG3-Lin-2R-6000-850-560x40 42 915 1144 38.5 50 6230 162 5000K 80 22"x1.6" 80 57282 PLPG3-Lin-2R-6000-927-560x40 42 915 1144 38.5 52 4840 126 2700K 90 22"x1.6" 80 58089 PLPG3-Lin-2R-6000-930-560x40 42 915 1144 38.5 52 5000 130 3000K 90 22"x1.6" 80 58090 PLPG3-Lin-2R-6000-935-560x40 42 915 1144 38.5 52 5100 132 3500K 90 22"x1.6" 80 58091 PLPG3-Lin-2R-6000-940-560x40 42 915 1144 38.5 52 5100 132 4000K 90 22"x1.6" 80 58126 PLPG3-Lin-2R-6000-940-560x40 42 912 1144 37.8 50.8 5381 142 5000K 90 22"x1.6" 80 57254 PLPG3-Lin-6000-927-560x40 42 915 1144 38.5 55 4840 126 2700K 90 22"x1.6" 80 57255 PLPG3-Lin-6000-827-560x40 42 915 1144 38.5 55 5610 146 2700K 80 22"x1.6" 80 57256 PLPG3-Lin-6000-830-560x40 42 915 1144 38.5 55 5800 151 3000K 80 22"x1.6" 80 57257 PLPG3-Lin-6000-835-560x40 42 915 1144 38.5 55 5970 155 3500K 80 22"x1.6" 80 57258 PLPG3-Lin-6000-840-560x40 42 915 1144 38.5 55 6040 157 4000K 80 22"x1.6" 80 57259 PLPG3-Lin-6000-850-560x40 42 915 1144 38.5 55 6230 162 5000K 80 22"x1.6" 80 1. All data is related to the entire module. Data reflects statistical mean values. Actual data may differ depending on variances in the manufacturing process. 2. Performance values were taken at steady state. Instant-on measurements may be higher. 3. Recommended for indoor use. *Nominal rating at board Tc of 35 C (±5 ) Ordering Guide PL P G3 Lin 2R 6000 8 30 560x40 Sub-brand Type Generation Shape 2 Row Lumen CRI Color Size (mm) PL = PrevaLED Performance Linear, Bar, Output >80 Temperature Area 30 = 3000K UL Information Product Name UL Description Item Numbers LE/5000/0063/0560/0040 57277, 57278, 57279, 57280, 57281, 57282 LE/5500/0063/0560/0040 57254, 57255, 57256, 57257, 57258, 57259 LE/5200/0063/0560/0040 58089, 58090, 58091 LE/5080/0063/0560/0040 58126 Minimum and Maximum Ratings Parameter Operating Temperature at Tc Point Storage Temperature Range Notes: 1. Exceeding maximum ratings may damage the LED light engine and cause potential safety hazards. 2. Elevated operating temperatures can be expected to negatively impact the service life in terms of lumen output. 3. Incorrect wiring may damage the LED light engine. Values -20 to 85 C (-4 to 185 F) -40 to 100 C (-40 to 212 F) Power Supply Information The PrevaLED Family of LED boards are optimized for use with OPTOTRONIC single channel constant current LED Power Supplies. For more information about the models please refer to www.osram.us/optotronic.
Assembly Diagram PrevaLED Linear 2R 22" x 1.6" 6000 Lumen (560mm x 40mm) 558.80mm 31.0mm 8.50mm 40.00mm 15.75mm 31.00mm 4.50mm 110.00mm 110.00mm 61.00mm 110.00mm 110.00mm PrevaLED Linear 22" x 1.6" 6000 Lumen (560mm x 40mm) 6.60mm 110.00mm 110.00mm 61.00mm 110.00mm 110.00mm 31.0mm 40.00mm 10.00mm 558.80mm Wiring Diagram Parallel Connection LED Driver LED Driver Notes: 1. Always ensure the load is within the power supply rating for current, voltage and wattage. 2. Ensure the total load does not violate Class II limits. 3. The number of boards that can be connected in parallel depends on power supply output specification. 4. Connecting boards in series is not recommended. Product Labeling and Traceability Product Description Label Serial Number Label Item Number/NAED Maximum Current Serial Number Assembly Number 12345 Max 300mA 13253B0001H2 AA55475 830 80- CRI 3000K- Color Temp. Color Temp. Symbol Serial Number
Safety WARNING: Information ONLY QUALIFIED PERSONNEL SHOULD PERFORM INSTALLATION. TO AVOID ELECTRICAL SHOCK OR COMPONENT DAMAGE, DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OF THE POWER SUPPLIES AND/OR MODULES. Failure to install the power supplies and/or LED modules in accordance with the National Electric Code (NEC), all applicable Federal, State and local electric codes as well as the specific Underwriters Laboratories (UL) safety standards for the installation, location and application may cause serious personal injury, death, property damage and/or product malfunction. 1. The LED module itself and all its components may not be mechanically stressed. 2. The LED module needs to be mounted on a heat sink providing adequate thermal dissipation. 3. Do not damage or destroy conducting paths on the circuit board. 4. The LED module is to be operated with Class 2 constant current control gear only. Not suitable for operation with line voltage. 5. The LED module cannot be operated safely when the housing is mechanically damaged. 6. For optimal cooling a thermal interface material should be applied between LED module and heat sink. 7. The LED module should be mounted to a heat sink with M3 screws or suitable accessories. Maximum tightening torque for mounting screws needs to be observed as excessive force may damage the housing. 8. Installation of LED module needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installation. 9. Damage by corrosion will not be honored as materials defect claim. It is the user s responsibility to provide suitable protection against corrosive agents, such as moisture, condensation and other harmful elements. The module is intended for use in dry and damp locations only. 10. Pay attention not to exceed the maximum operation temperature of 90 C at the Tc point when the modules are used in an enclosed environment. 11. The design of the housing/luminaire should be according to the IP standards applicable for the intended application. Assembly Information 1. The modules need no supplemental heat sinking when the temperature at the Tc Point is maintained at or below 85 C. Service life when the Tc temperature is maintained is 60,000 hours/l 70. When the environment is unknown, the modules should be installed in luminaires designed to provide proper thermal management to avoid premature failure of the product and to obtain expected service life. Service life (i.e. lumen depreciation) is primarily a function of LED temperature, which is to be monitored on the circuit board at the designated Tc Point. 2. Due to variations in fixture designs, there is no exact installation prescription for obtaining an appropriate Tc Point temperature. In general, the modules should be adhered to a flat metal surface which has enough surface area to transfer the heat from the LEDs to the surrounding air. In some cases, the metal surface can be part of the mass of the fixture itself. 3. It is important to understand that once heat is transferred to a heat sink that heat must still be allowed to escape the system. A heat sink transferring the thermal energy to the inside of an enclosed cavity may ultimately be of little use. 4. Tc Point temperature measurements should be taken with the modules operating at thermal equilibrium in potential fixture designs installed in an appropriate environment. Tc Point temperature can be measured with a standard thermocouple in direct contact with the circuit board at the Tc Point or with ML4C Series non-reversible OMEGALABELS (www.omega.com) or equivalent. 5. OSRAM recommends using #8 (4mm), pre-drilled screws with a head clearance 0.5" (12.7mm) diameter for securing the PrevaLED Linear boards. 6. Recommended input and board to board connections: Use 18-24 AWG solid core wire with a strip length of 7.0-9.0 mm. Use direct push-in of solid conductors. Wires can be released by twisting and pulling the wire simultaneously. Warranty OSRAM LED products are covered by our, OPTOTRONIC Power Supply or Control warranty. The is covered under warranty as long as the temperature at the Tc point does not exceed 85 C; exceeding this temperature will void all warranties. For additional warranty information or to download the warranty registration form visit www.osram.us/warranty. Module Warranty: 3 years System Warranty: 5 years
OSRAM SYLVANIA Inc. 200 Ballardvale Street Wilmington, MA 01887 USA 877-636-5267 ds.info@osram.com www.osram.us/ds OSRAM, OPTOTRONIC and PrevaLED are registered trademarks of OSRAM GmbH. All other trademarks are those of their respective owners. Specifications subject to change without notice. 2018 OSRAM SYLVANIA Inc. LED-DS015R1 2-18