Engine powered forklift ton

Similar documents
Engine powered forklift ton

Engine powered forklift ton

Engine powered forklift ton

Electric powered forklift ton

Electric powered forklift ton

Electric Powered Forklift tonne

Electric powered forklift tonqh

Electric powered forklift ton

Electric powered forklift tonne

Electric Powered Forklift ton

Electric Powered Forklift ton

Electric towing tractor ton

Reach truck ton

LIFT TRUCK TECHNOLOGY. Nexen Libero FGL20-25 (2.0t - 2.5t) LPG Fork Lift. Specification Sheet.

FD & FGE technical specifications

MANITOU MANITOU MANITOU MANITOU

Technical specifications

Technical specifications

Technical specifications

FHB technical specifications

Technical book. MSI / MH Range 2 to 5 tons Semi industrial IC forklifts

STANDARD SPECIFICATIONS MAST SPECIFICATIONS & RATED CAPACITIES: ZX-60 & ZX-70

4,500 2,000 2,000 9,891 / 1,188 2,779 / 3, x 16 x 12pr x 12 x 12pr 1,140 2, x 150 x 1,220 1, / / 450.

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 250D-7E

seated 4,500 2,000 2,000 6,579 9,891 / 1,188 2,779 / 3, x 16 x 12pr 7.00 x 12 x 14pr 7.00 x 12 x 12pr 1,282 1,140 1,140 8 / 10 2,220

1,200 / 1,916. pneumatic PR PR. x2 / Travel speed, unloaded. FOOT Some of the photos may include optional equipment. 6.

Electric Counterbalance Trucks Capacity kg E12, E14, E15, E16, E18, E20 SERIES 386

FHB technical specifications

series Diesel, LPG and Dual-fuel Forklift Trucks

STRONG PARTNERS. TOUGH TRUCKS. TM HIGH CAPACITY FORKLIFT TRUCKS H8-12XM-6, H13-16XM mm STAGE IIIB

Hyundai 20DA-7E DIESEL seated 2, ,410 3,116 4,478 / 643 1,200 / 1,916. pneumatic PR PR x2 /

15/18/20L(G)-7M. Specification. Dimension. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine PLEASE CONTACT. h10 I2 I e. b12.

n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 35L/40L/45L/50L-7A

MI 50L-100 TECHNICAL DATA SHEET. ICtrucks

R R R R 70 Technical data. Diesel and LP Gas forklift trucks. first in intralogistics

VF series. Electric forklift trucks. 1,600kg / 1,800kg / 2,000kg

Semi-industrialICforklifts

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Environmental-Friendly 180D-7E

FB & FTB technical specifications

Sideloader With standard or wide deck 3000 kg to 6000 kg S30 S40 S50 S60

Engine powered forklift trucks tonnes

25L/30L-7A 25G/30G-7A

Performance Enhanced For Stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment

FB & FTB technical specifications

EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

25L/30/33L-7M 25G/30/33G-7M

VL series. Electric Forklift Trucks 2,200kg / 2,500kg / 3,000kg / 3,500kg

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES

682 / 1,956. pneumatic PR PR. x2 / Travel speed, unloaded 26.3 / 23.5 NA FOOT power shift 195 /

Technical specifications

50/60/70/80D-7E. The print quality of this copy is not an accurate representation of the original.

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 50/60/70/80D-7E

Forklift Truck Capacity to kg H 420 H 460 SERIES 356

25L/30L-7A 25G/30G-7A

High Capacity Forklift Trucks AL WALID EQUIPMENT RENTAL LLC H16-18XM-12, H16-18XMS mm

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 25LC/30LC-7A

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES

TECHNICAL DATA SHEET. Range. Electricforklifttrucks

EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

25LC/30LC-7A 25GC/30GC-7A

UT15-18P. Technical Specifications. Utility you can trust TM kg

TECHNICAL DATA SHEET. Range. Electricforklifttrucks

15LC/18LC/20LCA-7 FORKLIFT TRUCKS Environmentally - Friendly

FORKLIFT Excellent MODEL

Performance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20LC-7M

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 25LC/30LC-7M 25GC/30GC-7M

RC 40 Technical Data. Diesel and LP gas forklift trucks RC RC RC RC RC RC 40-35

Empty Container Handler Capacity 9000 kg C90/5, C90/6, C90/7 SERIES 318

RC 40 Technical data.

HYUNDAI HEAVY INDUSTRIES

Diesel Forklift Trucks Capacity to kg H 100, H 120, H 140, H 150, H 160, H 180 SERIES 359

Electric Sit-down Reach Truck 1.6/2.0t CQD16NRVF/CQD16NRV/CQD16RVF CQD16RV/CQD20RVF/CQD20RV. EP EQUIPMENT CO.,LTD

Diesel and LP Gas Forklift Trucks 2,000kg / 2,500kg / 3,000kg / 3,500kg

SRX14/16. Electric Reach Truck kg kg.

Empty Container Handler Capacity 9000 kg 4000mm wheelbase C90/5, C90/6, C90/7 SERIES 318

15D/18D/20DA-7E. EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

IC Pneumatic Forklift Trucks tonnes

20L/25L/30L-7. Dimension. Specification. FORKLIFT TRUCKS Environmentally - Friendly PLEASE CONTACT. Some of the photos may include optional equipment.

Engine Powered Forklift Trucks tonnes

EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

Electric Counterbalanced Trucks Capacity kg E35, E40, E45, E50 Series 388

HIGH-CAPACITY IC PNEUMATIC

FM-4W Technical Data 4-Way Reach Truck FM-4W 20 FM-4W 25

EFG 425k/425/430k/430/S30

HIGH-CAPACITY IC PNEUMATIC

DP80N DP90N DP100N DP120N DP135N DP150N DP160N. Engine powered lift trucks tonnes

DP/GP15N - DP/GP18N - DP/GP20CN DP/GP20N - DP/GP25N - DP/GP30N DP/GP35N. Specifications Engine powered lift trucks tonnes

Technical data sheet ALPS15 16RM

XF Series LPG Cushion Tire Forklift

DP80N - DP90N - DP100N - DP120N DP135N - DP150N - DP160N Specifications

DFG/TFG 316s/320s. Diesel and LPG counterbalanced trucks with hydrostatic drive (1,600/2,000 kg)

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Stage IIIB emissionised engine 50/60/70D-7A

Introducing the GAME-CHANGER in IC to Electric Conversions SERIES A80600X A80900X A100X

*Photo may include optional equipment. 15/18/20BT-7 AC. FORKLIFT TRUCKS Environment Friendly

DFG/TFG 316/320. Diesel and LPG forklifts with hydrodynamic drive (Torque Converter) (1,600/2,000 kg)

35/40/45DS-7E 50DA-7E DIESEL FORKLIFT TRUCKS Environmental - Friendly. n Photo may include optional equipment.

S20C/25C/30C/32C. LPG engine Cushion Tyres 2000 kg 2500 kg 3000 kg 3200 kg.

RX 70 Technical data.

Some of the photos may include optional equipment. HYUNDAI DIESEL FORKLIFT TRUCKS Applied Tier 3 Engine 250D-7E PLEASE CONTACT

Transcription:

Engine powered forklift 5.0-8.0 ton 5FG/5FD www.toyota-forklifts.eu

Engine powered forklifts 5.0-6.0 ton Truck specifications 5FG50 5FG60 50-5FD60 1.1 Manufacturer Toyota Toyota Toyota 1.2 Model 5FG50 5FG60 50-5FD60 1.3 Drive Gasoline Gasoline Diesel 1.4 Operator type Rider seated Rider seated Rider seated 1.5 Load capacity/rated load Q kg 5000 6000 6000 1.6 Load centre c mm 600 600 600 1.8 Load distance, centre of drive axle to fork x mm 590 590 590 1.9 Wheelbase y mm 2250 2250 2250 2.1 Service weight kg 8050 8570 8770 Identification Weight Tyres Dimensions Performance data Combustion engine Others 2.2 Axle load, with load, front/rear kg 11660/1390 13090/1480 13200/1570 2.3 Axle load, without load, front/rear kg 4020/4030 3920/4650 4030/4740 3.1 Tyre - pneumatic (P), pneumatic shaped cushion (SE), solid rubber (R) P P P 3.2 Tyre size, front 8.25-15-12PR(I) 8.25-15-12PR(I) 8.25-15-12PR(I) 3.3 Tyre size, rear 8.25-15-12PR(I) 8.25-15-12PR(I) 8.25-15-12PR(I) 3.5 Wheels, number front/rear (x=driven wheels) 4x/2 4x/2 4x/2 3.6 Track width, front b 10 mm 1490 1490 1490 3.7 Track width, rear b 11 mm 1670 1670 1670 4.1 Tilt of mast/fork carriage forward/backward a/b deg 10/12 10/12 10/12 4.2 Height, mast lowered h 1 mm 2515 2515 2515 4.3 Free lift h 2 mm 210 210 210 4.4 Lift h 3 mm 2937 2937 2937 mm 3000 3000 3000 4.5 Height, mast extended h 4 mm 4370 4370 4370 4.7 Height of overhead guard (cab) h 6 mm 2440 2440 2440 4.8 Seat height h 7 mm 1390 1390 1390 4.12 Coupling height h 10 mm 430 430 430 4.19 Overall length l 1 mm 4680 4725 4725 4.20 Length to face of forks l 2 mm 3460 3505 3505 4.21 Overall width b 1 mm 1995 1995 1995 4.22 Fork dimensions s/e/l mm 63/150/1220 63/150/1220 63/150/1220 4.23 Fork carriage DIN 15 173, class/type A, B IVA IVA IVA 4.24 Fork-carriage width b 3 mm 1700 1700 1700 4.31 Ground clearance, with load, below mast m 1 mm 185 185 185 4.32 Ground clearance, centre of wheelbase m 2 mm 215 215 215 4.33 Aisle width for pallets 1000 x 1200 crossways A st mm 5140 5140 5140 4.34 Aisle width for pallets 800 x 1200 lengthways A st mm 5340 5340 5340 4.35 Turning radius W a mm 3350 3350 3350 4.36 Internal turning radius b 13 mm 1357,5 1357,5 1357,5 5.1 Travel speed, with/without load km/h 23,0/25,0 23,0/25,0 30,0/33,0 5.2 Lift speed, with/without load m/s 0,42/0,47 0,42/0,47 0,49/0,54 5.3 Lowering speed, with/without load m/s 0,40/0,50 0,40/0,50 0,40/0,50 5.6 Max. drawbar pull, with/without load N 57000/25500 54000/25500 59000/25500 5.7 Gradeability, with load % 22 19 31 5.8 Max. gradeability, with/without load % 46/28 40/26 40/23 5.10 Service brake Hydraulic Hydraulic Hydraulic 7.1 Engine manufacturer/type Toyota 1FZ-E Toyota 1FZ-E Hino N04C 7.2 Engine power acc. to ISO 1585 kw 63 63 90 7.3 Rated speed 1/min 2350 2350 2200 7.4 No. of cylinders/displacement cm 3 6/4476 6/4476 4/4009 8.2 Operating pressure for attachments bar 175 175 175 8.3 Oil volume for attachments l/min 125 125 145 8.4 Sound level at the driver s ear according to EN 12 053 db(a) 88 88 88 Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice. Please obtain the latest specifications before contracting products.

Mast dimensions and rated capacities 5FG/5FD Model V FSV 5FG50, 5FG/D60 3000 3300 3500 3700 4000 4500 5000 5500 6000 4000 4300 4700 5000 6000 7000 8000 Lift h 3 2937 3237 3437 3637 3937 4437 4937 5437 5937 3937 4237 4637 4937 5937 6937 7937 Height, mast lowered h 1 2515 2665 2765 2865 3165 3415 3865 4115 4365 2515 2665 2765 2865 3415 3865 4115 Height, mast extended 1) h 4 5020 5365 5765 6065 7215 8215 9215 Height, mast extended 2) h 4 4370 4670 4870 5070 5370 5870 6370 6870 7370 5370 5670 6070 6370 7370 8370 9370 Free lift, without load backrest h 2 1560 1665 1765 1865 2265 2715 2965 Free lift, with load backrest h 2 210 210 210 210 210 210 210 210 210 1145 1295 1395 1495 2045 2495 2745 1) Without load backrest 2) With load backrest; Height of standard load backrest is 1370 m Dual tyre V FSV 5FG50 Tilt range, forward deg 10 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 Tilt range, backward deg 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 6 6 6 6 6 6 6 Load capacity at 500 mm LC kg 5000 5000 5000 5000 5000 5000 5000 4750 4400 4750 4750 4750 4750 4300 3500 2500 Dual tyre V FSV 5FG/D60 Tilt range, forward deg 10 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 Tilt range, backward deg 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 6 6 6 6 6 6 6 Load capacity at 500 mm LC kg 6000 6000 6000 6000 6000 6000 6000 6000 5700 5700 5700 5500 5500 5200 3700 2700 Data in ( ) are for front windshield with wiper and washer, canvas cab and steel cab. h 2 h 10 h7 h 1 b 1 b 10 b 11 h 6 s h 4 h 3 h 23 l m 1 x m2 l 2 y e Wa l 1

Engine powered forklifts 7.0 ton Truck specifications 5FG70 50-5FD70 1.1 Manufacturer Toyota Toyota 1.2 Model 5FG70 50-5FD70 1.3 Drive Gasoline Diesel 1.4 Operator type Rider seated Rider seated 1.5 Load capacity/rated load Q kg 7000 7000 1.6 Load centre c mm 600 600 1.8 Load distance, centre of drive axle to fork x mm 595 595 1.9 Wheelbase y mm 2250 2250 2.1 Service weight kg 9330 9530 2.2 Axle load, with load, front/rear kg 14590/1740 14710/1820 2.3 Axle load, without load, front/rear kg 3870/5460 3990/5540 3.1 Tyre - pneumatic (P), pneumatic shaped cushion (SE), solid rubber (R) P P 3.2 Tyre size, front 8.25-15-14PR(I) 8.25-15-14PR(I) 3.3 Tyre size, rear 8.25-15-14PR(I) 8.25-15-14PR(I) 3.5 Wheels, number front/rear (x=driven wheels) 4x/2 4x/2 3.6 Track width, front b 10 mm 1490 1490 3.7 Track width, rear b 11 mm 1670 1670 4.1 Tilt of mast/fork carriage forward/backward a/b deg 10/12 10/12 Identification Weight Tyres Dimensions Performance data Combustion engine Others 4.2 Height, mast lowered h 1 mm 2515 2515 4.3 Free lift h 2 mm 215 215 4.4 Lift h 3 mm 2932 2932 mm 3000 3000 4.5 Height, mast extended h 4 mm 4370 4370 4.7 Height of overhead guard (cab) h 6 mm 2440 2440 4.8 Seat height/stand height h 7 mm 1390 1390 4.12 Coupling height h 10 mm 430 430 4.19 Overall length l 1 mm 4805 4805 4.20 Length to face of forks l 2 mm 3585 3585 4.21 Overall width b 1 mm 1995 1995 4.22 Fork dimensions s/e/l mm 68/150/1220 68/150/1220 4.23 Fork carriage DIN 15 173, class/type A, B IVA IVA 4.24 Fork-carriage width b 3 mm 1700 1700 4.31 Ground clearance, with load, below mast m 1 mm 180 180 4.32 Ground clearance, centre of wheelbase m 2 mm 210 210 4.33 Aisle width for pallets 1000 x 1200 crossways A st mm 5195 5195 4.34 Aisle width for pallets 800 x 1200 lengthways A st mm 5395 5395 4.35 Turning radius W a mm 3400 3400 4.36 Internal turning radius b 13 mm 1357,5 1357,5 5.1 Travel speed, with/without load km/h 23,0/25,0 30,0/33,0 5.2 Lift speed, with/without load m/s 0,42/0,47 0,49/0,54 5.3 Lowering speed, with/without load m/s 0,40/0,50 0,40/0,50 5.6 Max. drawbar pull, with/without load N 54000/25500 59000/25500 5.7 Gradeability, with load % 19 23 5.8 Max. gradeability, with/without load % 35/21 35/21 5.10 Service brake Hydraulic Hydraulic 7.1 Engine manufacturer/type Toyota 1FZ-E Hino N04C 7.2 Engine power acc. to ISO 1585 kw 63 90 7.3 Rated speed 1/min 2350 2200 7.4 No. of cylinders/displacement cm 3 6/4476 4/4009 8.2 Operating pressure for attachments bar 200 200 8.3 Oil volume for attachments l/min 125 145 8.4 Sound level at the driver s ear according to EN 12 053 db(a) 88 88 Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice. Please obtain the latest specifications before contracting products.

Mast dimensions and rated capacities 5FG/5FD Model V FSV 5FG/D70 3000 3300 3500 3700 4000 4500 5000 5500 6000 4000 4300 4700 5000 6000 7000 8000 Lift h 3 2932 3232 3432 3632 3932 4432 4932 5432 5932 3932 4232 4632 4932 5932 6932 7932 Height, mast lowered h 1 2515 2665 2765 2865 3165 3415 3865 4115 4365 2515 2665 2765 2865 3415 3865 4115 Height, mast extended 1) h 4 5020 5365 5765 6065 7215 8215 9215 Height, mast extended 2) h 4 4370 4670 4870 5070 5370 5870 6370 6870 7370 5370 5670 6070 6370 7370 8370 9370 Free lift, without load backrest h 2 1560 1665 1765 1865 2265 2715 2965 Free lift, with load backrest h 2 215 215 215 215 215 215 215 215 215 1145 1295 1395 1495 2045 2495 2745 1) Without load backrest 2) With load backrest; Height of standard load backrest is 1370 mm Dual tyre V FSV 5FG/D70 Tilt range, forward deg 10 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 Tilt range, backward deg 12(6) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 12(9) 6 6 6 6 6 6 6 Load capacity at 500 mm LC kg 7000 7000 7000 7000 7000 7000 7000 6700 6500 6700 6700 6700 6700 5700 4000 3000 Data in ( ) are for front windshield with wiper and washer, canvas cab and steel cab. h 2 h 10 h7 s h 1 b 1 b 10 b 11 h 6 h 4 h 3 h 23 l m 1 x m2 l 2 y e Wa l 1

Engine powered forklifts 8.0 ton Truck specifications 5FD80 1.1 Manufacturer Toyota 1.2 Model 5FD80 1.3 Drive Diesel 1.4 Operator type Rider seated 1.5 Load capacity/rated load Q kg 8000 1.6 Load centre c mm 600 1.8 Load distance, centre of drive axle to fork x mm 680 1.9 Wheelbase y mm 2500 2.1 Service weight kg 11220 Identification Weight Tyres Dimensions Performance data Combustion engine Others 2.2 Axle load, with load, front/rear kg 17210/2010 2.3 Axle load, without load, front/rear kg 5110/6110 3.1 Tyre - pneumatic (P), pneumatic shaped cushion (SE), solid rubber (R) P 3.2 Tyre size, front 9,00-20-14PR(I) 3.3 Tyre size, rear 9,00-20-14PR(I) 3.5 Wheels, number front/rear (x=driven wheels) 4x/2 3.6 Track width, front b 10 mm 1585 3.7 Track width, rear b 11 mm 1750 4.1 Tilt of mast/fork carriage forward/backward a/b deg 10/12 4.2 Height, mast lowered h 1 mm 2880 4.3 Free lift h 2 mm 210 4.4 Lift h 3 mm 2932 mm 3000 4.5 Height, mast extended h 4 mm 4340 4.7 Height of overhead guard (cab) h 6 mm 2615 4.8 Seat height/stand height h 7 mm 1565 4.12 Coupling height h 10 mm 520 4.19 Overall length l 1 mm 5150 4.20 Length to face of forks l 2 mm 3930 4.21 Overall width b 1 mm 2160 4.22 Fork dimensions s/e/l mm 68/170/1220 4.23 Fork carriage DIN 15 173, class/type A, B 4.24 Fork-carriage width b 3 mm 1800 4.31 Ground clearance, with load, below mast m 1 mm 215 4.32 Ground clearance, centre of wheelbase m 2 mm 350 4.33 Aisle width for pallets 1000 x 1200 crossways A st mm 5580 4.34 Aisle width for pallets 800 x 1200 lengthways A st mm 5780 4.35 Turning radius W a mm 3700 4.36 Internal turning radius b 13 mm 1520 5.1 Travel speed, with/without load km/h 29,0/32,0 5.2 Lift speed, with/without load m/s 0,40/0,43 5.3 Lowering speed, with/without load m/s 0,40/0,50 5.6 Max. drawbar pull, with/without load N 59000/28400 5.7 Gradeability, with load % 20 5.8 Max. gradeability, with/without load % 31/23 5.10 Service brake Hydraulic 7.1 Engine manufacturer/type Hino N04C 7.2 Engine power acc. to ISO 1585 kw 90 7.3 Rated speed 1/min 2200 7.4 No. of cylinders/displacement cm 3 4/4009 8.2 Operating pressure for attachments bar 185 8.3 Oil volume for attachments l/min 145 8.4 Sound level at the driver s ear according to EN 12 053 db(a) 88 Performance data and dimensions are nominal and subject to tolerances. Specifications are subject to change without notice. Please obtain the latest specifications before contracting products.

Mast dimensions and rated capacities 5FG/5FD Model 5FD80 3000 3300 3500 3700 4000 4500 5000 5500 6000 Lift h 3 2932 3232 3432 3632 3932 4432 4932 5432 5932 Height, mast lowered 1) h 1 2880 3030 3130 3230 3380 3630 4080 4330 4580 Height, mast extended h 4 4340 4640 4840 5040 5340 5840 6510 7010 7510 Free lift h 2 210 210 210 210 210 210 210 210 210 1) with optional tyre size; 10.00-20-14 PR (I), plus 25 mm. V Dual tyre 5FD80 Tilt range, forward deg 10 10 10 10 10 10 10 10 10 Tilt range, backward deg 12(10) 12(10) 12(10) 12(12) 12(12) 12(12) 12(12) 12(12) 12(12) Load capacity at 500 mm LC kg 8000 8000 8000 8000 8000 8000 8000 7700 7500 Data in ( ) are for front windshield with wiper and washer, canvas cab and steel cab. V h 2 h 10 h7 s h 1 b 1 b 10 b 11 h 6 h 4 h 3 h 23 l m 1 x m2 l 2 y e Wa l 1

Standard equipments: Toyota OPS (Operator Presence Sensing) Toyota ORS (Operator Restraint System) seat Wide visible mast (MFH: 3000 mm) Load backrest (Height: 1370 mm) Long forks (Length: 1220 mm) Long forkbar [Length: 1700 mm (5FG50, 5FG/D60.70), 1800 mm (5FD80)] 2-way valve Pneumatic tyres Full hydraulic power steering 8 Cyclone air cleaner with snorkel air intake Upswept exhaust Headlights Combination meter including self diagnostic system Tilt steering column TP-Technical Publications, Sweden 745564-040, version 2, 0912 5FG/5FD TOYOTA MATERIAL HANDLING IN EUROPE, MANAGING THE TOYOTA AND BT MATERIALS HANDLING BRANDS IN EUROPE.