Chapter 40: Engines and motors

Similar documents
Task 4: Read the texts, look at the illustrations and do the activities below.

Introduction to I.C Engines CH. 1. Prepared by: Dr. Assim Adaraje

FUNDAMENTAL OF AUTOMOBILE SYSTEMS

Fundamentals of Small Gas Engines

Internal Combustion Engines

Chapter 14 Small Gas Engines

INTRODUCTION OF FOUR STROKE ENGINE

ENGINE & WORKING PRINCIPLES

UNIT 2 POWER PLANTS 2.1 INTRODUCTION 2.2 CLASSIFICATION OF IC ENGINES. Objectives. Structure. 2.1 Introduction

California State University, Bakersfield. Signals and Systems. Kristin Koehler. California State University, Bakersfield Lecture 4 July 18 th, 2013

ENGINES ENGINE OPERATION

Modern Auto Tech Study Guide Chapter 11 Pages Engine Fundamentals 62 Points

Engine Design Classifications

Two Cycle and Four Cycle Engines

UNIT IV INTERNAL COMBUSTION ENGINES

Unit C: Agricultural Power Systems. Lesson 1: Understanding Principles of Operation of Internal Combustion Engines

OBJECTIVE: GENERAL ASPECTS ABOUT ENGINES MECHANISM:

SAMPLE STUDY MATERIAL

TKP3501 Farm Mechanization

Air Cooled Engine Technology. Roth 9 th Ch 6 Engine Performance Pages

Automobile section, showing different parts in detail. and miscellaneous devices.

Air Cooled Engine Technology. Roth 9 th Ch 5 2 & 4 Cycle Engines Pages 81 94

Internal Combustion Engines.

Unit IV. Marine Diesel Engine Read this article about the engines used in the marine industry

A. Aluminum alloy Aluminum that has other metals mixed with it.

Handout Activity: HA170

IC ENGINE(4 STROKE) G.H.R.I.E&M JALGAON. Sec.(Mech) Sec.(Mech) Sec.(Mech) Sec.(Mech) Mehta chirag Shah sagar Patel jainish talele amit

I.C ENGINES. CLASSIFICATION I.C Engines are classified according to:

Cathay Pacific I Can Fly Programme General Aviation Knowledge. Aerodynamics

Comparative Study Of Four Stroke Diesel And Petrol Engine.

The Four Stroke Cycle

Engine Construction and Principles of Operation

CHAPTER 1 MECHANICAL ARRANGEMENT

Introduction to Aerospace Propulsion

Inside a typical car engine. Almost all cars today use a reciprocating internal combustion engine because this engine is:

THE FOUR STROKE CYCLE BUT HOW DOES IT WORK EXACTLY? LET S LOOK IN MORE DETAIL 1. INDUCTION SUCK 2. COMPRESSION 3. COMBUSTION 4.

Internal Combustion Engine. Prepared by- Md Ferdous Alam Lecturer, MEE, SUST

Internal combustion engines can be classified in a number of different ways: 1. Types of Ignition

Internal Combustion Engine

This fuel can be mixed with gasoline or burned by itself. At the present time this fuel is not

ADDIS ABABA UNIVERSITY INSTITUTE OF TECHNOLOGY

CONVENTIONAL ENGINE CONSTRUCTION

Modern Automotive Technology Chapter 16. Engine Size and Performance Measurements

ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL TWO INSTRUCTIONAL GUIDE SECTION 3 EO M EXPLAIN THE CYCLES OF A FOUR-STROKE PISTON-POWERED ENGINE

Air Management System Components

Air-Cooled Engine Technology

Applied Thermodynamics Internal Combustion Engines

Question: Automobiles. Observations About Automobiles. Heat Engines. Heat Pumps. Question:

Automobiles. Introductory Question. 6 Questions about Automobiles. Observations about Automobiles. Question 1. Heat Engines

ACTUAL CYCLE. Actual engine cycle

Chapter. The Automobile

INTERNAL COMBUSTION ENGINE (SKMM 4413)

US ARMY BRADLEY FIGHTING VEHICLE SYSTEMS MECHANIC CORRESPONDENCE COURSE MOS/SKILL LEVEL: 63T30 PRINCIPLES OF INTERNAL COMBUSTION ENGINES

Combustion engines. Combustion

T erm STI2D. The process by which a car works is a lot simpler than you may think. When a driver turns a key in the ignition:

Engine Systems. Basic Engine Operation. Firing Order. Four Stroke Cycle. Overhead Valves - OHV. Engine Design. AUMT Engine Systems 4/4/11

EM2007 Errata Student Manual 13 April 2008 Replace referenced paragraphs and homework questions with the following:

State of the Art (SOTA) Manual for Internal Combustion Engines

Engine Project. These engines are typically used in lawn mowers, snow blowers, go-carts, etc

FUNCTIONS OF INTERNAL COMBUSTION ENGINES COMPONENTS PADALOMOJI MEDŽIAGA MOKYTOJUI. Fuel delivery system consists of kuro padavimo sistemą sudaro:

Unit C: Agricultural Power Systems. Lesson 6: Using Multiple Cylinder Engines

Compressed and Recycled Air Engine

UNIT 4 IGNITION SYSTEMS

Figure 1. b) 1 mark for mm (+/ mm)

ARTICULATED RHOMBIC PRISM PISTON ENGINES

CH. 48 ENGINE MECHANICAL PROBLEMS TEST

Chapter 15. Inertia Forces in Reciprocating Parts

(12) Patent Application Publication (10) Pub. No.: US 2005/ A1

Lecture 5. Abnormal Combustion

Objectives Topics Resources & Notes GAIN ATTENTION Review homework from chapter 6 Slide 1 OBJECTIVE

CHECK OUT OUR WEBSITE SOME TIME FOR PLENTY OF ARTICES ABOUT SELF DEFENSE, SURVIVAL, FIREARMS AND MILITARY MANUALS.

Service Advisor Customer Service Skills SERVICE ADVISOR. Technical for Non-technical - Engines INDUCTION

Chapter 15. Inertia Forces in Reciprocating Parts

Diesel Engine Fundamentals Part 1 Course# ME4061

Thermodynamic Cycles. Alicia Ma. Esponda Cascajares

AIM OF THE EXPERIMENT:- To study about two stroke and four stroke petrol engines. APPARATUS REQUIRED:- Sl.no Name of the apparatus Specification Quant

Henry Ford (July 30, April 7, 1947)

End of Book Questions Chapter 7 Aircraft Power Plants

Chapter 8 Production of Power from Heat

L34: Internal Combustion Engine Cycles: Otto, Diesel, and Dual or Gas Power Cycles Introduction to Gas Cycles Definitions

Moments. It doesn t fall because of the presence of a counter balance weight on the right-hand side. The boom is therefore balanced.

Practical Exercise for Instruction Pack 2. Ed Abdo

ABSTRACT. Electronic fuel injection, Microcontroller, CNG, Manifold injection. Manifold injection with uniflow scavenging.

Powertrain Efficiency Technologies. Turbochargers

Gas Power System. By Ertanto Vetra

LECTURE NOTES INTERNAL COMBUSTION ENGINES SI AN INTEGRATED EVALUATION

ESCONDIDO FIRE DEPT TRAINING MANUAL Section Driver Operator Page 1 of 13 Apparatus Power Plants Revised

MECHANICAL SCIENCE Module 1 Diesel Engine Fundamentals

D etonation in Light Aircraft

Emission from gasoline powered vehicles are classified as 1. Exhaust emission 2. Crank case emission 3. Evaporative emission. Table 1.

2. Air Line AIR LINE FUEL INJECTION (FUEL SYSTEM) A: GENERAL B: MANIFOLD ABSOLUTE PRESSURE SENSOR FU(H4DOTC)-3

Engine Brake, Design and Function. This information covers the design and function of the Volvo Engine Brake (VEB) on the Volvo D11F engine.

Chapter 9 GAS POWER CYCLES

MIXTURE FORMATION IN SPARK IGNITION ENGINES. Chapter 5

Using Multiple Cylinder Engines

MAIN PROPULSION ENGINE INTERMEDIATE GENERAL FOR MAINTENANCE INSTRUCTIONS 3-1 LANDING CRAFT UTILITY (LCU) INDEX-1

Module7:Advanced Combustion Systems and Alternative Powerplants Lecture 32:Stratified Charge Engines

SHEILDED METAL ARC WELDING (SMAW) AT/AE MECHANICAL CONTEST

WEEK 4 Dynamics of Machinery

Focus on Training Section: Unit 2

Transcription:

Chapter 40: Engines and motors Dr. Bassam A. Tayeh Engineering Technical English Islamic University of Gaza April, 2017

Contents A. Types and functions of engines and motors B. Internal combustion engines 2

A. Types and functions of engines and motors The term engine usually refers to petrol engines, diesel engines and jet engines (or jets) النفاثة.المحركات In engineering, motor usually means electric motor-but in general language, motor can also refer to petrol and diesel engine. Engines and motors power (or drive) machines by generating rotary motion دوارة حركة for example, to drive wheels. In jet engines, compressors and turbines rotate to generate thrust دفع pushing force, produced by forcing air from the back of the engine at high velocity. 3

A. Types and functions of engines and motors As an engine produces a couple rotate force- the moving parts of the machine it is driving will produce resistance, due to friction and other forces. As a result, torque (twisting force) is exerted on the output shaft of the engine. Torque calculated as a turning moment, in newton meters- is therefore a measure of how much rotational force an engine can exert. 4

A. Types and functions of engines and motors The rate at which an engine can work to exert torque is the power of the engine, measured in watts. Although engineers normally calculate engine power in watts, the power of vehicle قوة الموتر (bhp). engines is often given in brake horsepower This is the power of an engine s output shaft measured in horsepower(hp) a historic measured of power (see Appendix III on page 100). Note: See the following units for more information: Unit 33 (turning moments), Unit 34 (rotary motion), Unit 35 (power), and Unit 41 (shafts). BrE: petrol; AmE: gasoline BrE: petrol engine; AmE: gasoline engine 5

B. Internal combustion engines Petrol and diesel engines are internal combustion engines. This means they are driven by the combustion (burning) of fuel in غرف enclosed, sealed spaces called combustion chambers In petrol and diesel engines, the combustion chambers.الاحتراق are cylinders surrounded by a cylinder block and closed at the.مكبس top by a cylinder head. Each cylinder contains a piston The number of piston cylinders in an engine varies engine in small motorcycles have only one, while sports car engines may have twelve. 6

B. Internal combustion engines Fuel is supplied to each cylinder from a tank. In most engines, the flow of fuel is generated by a pump, which forces it at high pressure through fuel injectors. These vaporize the fuel, allowing it to mix with air. Using this mixture (of fuel and air),. محركات رباعية الدفع most engines function as four-stroke engines This means they work on a cycle of four stages or four strokes. A stroke is an upward or downward movement of a piston. 7

B. Internal combustion engines مسرب 1 Induction or intake The intake valve opens. The mixture enters the cylinder through a port (opening) in the cylinder head while the piston moves downwards. انضغاط 2 compression The intake valve closes. The piston moves upwards, compressing the mixture. 8

B. Internal combustion engines 3 Power or ignition The spark plug produces يشعل a spark, which ignites (lights) the mixture. On ignition, the mixture explodes, generating a sudden pressure which forces the piston down. 4 Exhaust The Exhaust valve opens, and the piston moves upwards, forcing the Exhaust gases those produced during combustion out of the منفذ cylinder via the exhaust port The Exhaust valve then.العادم closes and the cycle begins again. The cycle of a four stroke petrol engine Notes: See exercise 40.2 opposite for an illustration of a cylinder. See unit 42 for more on cam, camshaft, connecting rod and crankshaft. 9

40.1 Complete the text about diesel engines using words from A and B opposite. Diesel engines differ from (1) ---------- engines in one key respect: they are not fitted with a (2) ------------, in each cylinder, to ignite the fuel. This is because when a (3) -------- of diesel and air is compressed inside a hot (4) -- ------, it will explode spontaneously عفوية,طريقة without the need for a spark to provide (5) ----------. A diesel engine must therefore work in a way which prevents the diesel from exploding before the piston is at the top of the cylinder. To achieve this, the engine takes in only air during the (6) -------- stage of the cycle. Therefore, during the (7) ----------- stage, only air and not an air fuel mixture is pressurized. It is only at that last instant, when full compression has occurred, that the (8) ------ above each cylinder forces vaporized diesel onto the combustion chamber, where it ignites. 10

40.1 Complete the text about diesel engines using words from A and B opposite. Diesel engines operate at lower speeds than petrol engines, making them less suitable for high speed applications. However, they are more able to (9 ) --------------- heavy vehicles, as they can produce greater amounts of (10) ----- ------ than petrol engines. 11

40.2 look at the cross section of an engine, and label it using words and expressions from B opposite. 12

End of Chapter 40 13