price & application guide

cana price & application guide 04.30.2018

contents I N T RO D U C T I O N.................................... 3 A P P L I C AT I O N G U I D E................................. 13 P R I C E G U I D E....................................... 27

introduction

introduction W H E R E TO F I N D T H E I N F O R M AT I O N Y O U N E E D............5 3 H OW TO M A K E T H I S G U I D E W O R K F O R Y O U...............6 I N D E X B Y S E C T I O N................................8 I N D E X B Y P RO D U C T...............................9 C A N A O V E RV I E W..................................1 0 G E N E R A L I N F O R M AT I O N.............................1 1

4 4 4 4 4 4 4 4 4 4 4 4 4 4

introduction where to find the information you need Teknion provides an array of tools and information resources to help you get things done simply and easily. From product pricing to application guidelines to online planning suggestions, you will find what you need when you need it. product pricing Online Access to all current pricing in PDF format, can be found at www.teknion.com, by selecting the products tab, the desired product line and then pricing module. Printed Price Guides by product line containing product maps, detailed pricing tables and product basics information are available to help you specify correctly. These guides can be ordered online through www.teknion.com, by selecting the tools tab and then print on demand or by contacting your local Teknion Representative. Xpress The Xpress symbol is displayed in the Price Guide beside products that are offered in Teknion s Xpress Program. Online Access can be found at www.teknion.com, by selecting the tools tab and then Xpress. A printed Xpress Guide can be ordered online through www.teknion.com, by selecting the tools tab and then print on demand or by contacting your local Teknion Representative. application guidelines Online Access to all current Application Guides in PDF format, can be found at www.teknion.com, by selecting the tools tab, application guides and the desired product line. Printed Application Guides by product line containing detailed application guidelines as well as tips to help you plan and specify each of our products are available. These guides can be ordered online through www.teknion.com, by selecting the tools tab and then print on demand or by contacting your local Teknion Representative. planning tool Select and view typicals of our products by setting, product, or footprint. Get great ideas and save time! Online Access is available on www.teknion.com, by selecting the tools tab and then planning tool. weights & volumes Online Access to Weights & Volumes are available on www.teknion.com, by selecting the products tab and the desired product line. Download Weights & Volumes. fabrics & finishes Teknion's Fabrics and Finishes offering includes the following programs; Finishes + Materials and Teknion Textiles. Online Access is available on www.teknion.com, by selecting the tools tab and then Fabrics & Finishes. Printed Fabrics & Finishes Guides can be ordered online through www.teknion.com, by selecting the tools tab and then print on demand or by contacting your local Teknion Representative. product photography & drawings Online Access to all photos, line drawings and renderings are available on www.teknion.com, by selecting the tools tab and selecting either photography, CAD symbols or Sketchup 3D Warehouse. order forms All forms (COM Request, TekniPaint and TekniStain forms) are available online at www.teknion.com, by selecting the tools tab and then Fabrics & Finishes. Download the form you require. warranty/terms & conditions of sale Online Access is available on www.teknion.com, by selecting the Legal & Warranty link located on the footer of the website. installation guides Installation Guides are available for both Online and Print. Contact your Teknion Customer Service Representative for more details. user feedback How is our marketing material working for you? Feedback from the user is very important to the quality of Teknion s marketing material. We ask that if you have suggestions on how you think we could improve content OR if you have found an error, that you please contact your Teknion Technical Services department. 5 5 5 5 5 5 5 5 5 5 5 5 5 5

introduction how to make this guide work for you 6 guide contents This guide contains all the information you need to order this product through your specification software. The Introduction section provides everything you need to get started. The Application Guide contains detailed specification guidelines, application and planning information to help you plan your project correctly. The Price Guide sections provide detailed pricing and specification information by product type. 6 6 introduction Index by section Index by product application guide Overview and Basics by section Planning Details by section price guide Product Maps by section Pricing by section 6 6 basics page at a glance It is recommended that you review the basics pages before you begin specifying a product. For more detailed application information refer to the Application Guide available on www.teknion.com. 6 Section Title Page Title application guide desks requiring shared support 6 6 Page Number 16 16 16 The images below illustrate the available Table Desk styles. The Bullet-Shaped, P-Shaped, Single and Double Fan-Shaped Desks must connect to a Bridge or Return Credenza Modesty panel is positioned centered on Bullet and Double Fan-Shaped Desks Modesty panel on P-Shaped Desks is positioned 21" inset on 30" deep desks and 23" inset on 36" deep desks Modesty panel on Single Fan-Shaped Desks is positioned 20" inset on 30" deep desks (users side) and 23" inset on 36" deep desks (users side) Support columns are available in three styles: Round, Rectangular and Elliptical Product Overview Statement Important Product Notes 6 6 Product Name and Code, application notes, dimensions and finishes (as applicable) 16 16 16 16 BULLET-SHAPED TABLE DESK (ZCDUT) Available with a 1/2-Height (shown), 3/4-Height or Full-Height. P-SHAPED TABLE DESK (ZCDP) Available with a 1/2-Height (shown), 3/4-Height or Full-Height. P-SHAPED CORNER UNIT (ZCDPC) Available with a 1/2-Height. Detailed Component Illustrations (where required) 6 6 16 16 16 16 16 SINGLE FAN-SHAPED TABLE DESKS ( ZCSDFT) DOUBLE FAN-SHAPED TABLE DESKS (ZCDDFT) Available with a 1/2-Height (shown), Available with a 1/2-Height (shown), or 3/4-Height. or 3/4-Height. Right handed desk shown. Optional Grommets are centered on the modesty panel. An upcharge will apply if specified. The opening is 1 1/2" high x 6" wide. 1 1/2" 6" 6 Last update for this page 16 16 cana price & application guide February 21, 2017 6

introduction how to make this guide work for you pricing details at a glance Section Title Product Code/Name Product Illustration 36 36 desks Xpress ZCDRL Rectangular Desk Shell 29.5" Width Depth WHAT S INCLUDED 1 desk with modesty panel (as specified), worksurface grommet (if specified), modesty panel grommet (if specified). NOTES Refer to the Application Guide for details on grommet location. Please see finish listing with codes in the Wood/Casegoods Introduction booklet. Not all Width/Depth combinations are available. Please see pricing for exact offering. Xpress Please note that Cana s Radius Edge is not available as Xpress. Product Description, What s Included, What s Excluded (where applicable) and Notes (where applicable) 7 7 Page Number Feature and finish options you may select from when specifying 36 36 36 36 PRODUCT OPTIONS Modesty Width Panel Style F Full- Height Modesty 60, 66, 72, 78, 84 SAMPLE ORDER CODE ZCDRL F Depth 30, 36 Finish Natural Veneer Custom Wood Stain Edge Detail CG Pencil CP Radius 60 36 ZE CG N None OPA Round Plastic Black OMA Round Metal Black OMB Round Metal Polished Brass Worksurface Grommet Style RMA OMC Round Metal Satin Chrome OMD Round Metal Polished Chrome OME Round Metal Antique Brass RMA Rectangular Metal Black Grommet Surface Location L Left R Right C Centered L Modesty Panel Grommet N None S Scallop Grommet Centered on Modesty N Sample Order Code 7 7 Product Dimensions in inches and millimeters While sizing may be shown in both imperial and metric, products need to be ordered using imperial dimensions. Dimensional Codes (listed throughout the text and under options on pricing pages) are nominal figures, they are not actual dimensions. 36 36 36 36 36 36 36 DIMENSIONS INCHES / MM PRICING W D Pencil Edge Radius Edge 60 / 1524 30 / 762 1828 1964 66 / 1676 30 / 762 1947 2088 66 / 1676 36 / 914 2051 2200 72 / 1829 30 / 762 2045 2185 72 / 1829 36 / 914 2156 2310 78 / 1981 36 / 914 2264 2426 84 / 2134 36 / 914 2364 2532 If a Worksurface Grommet is specified, add 62 Round Plastic add 132 Round Metal add 193 Rectangular Metal If a Grommet is specified, add 68 To order a Custom Color for Cana please use the code ZCCWS. A one time 753 list charge per color applies. Pricing table categorized by dimensions and pricerelevant finishes (where applicable) 7 7 7 Last update for this page 36 cana price & application guide February 21, 2017 7 additional information The following forms are available at www.teknion.com, by selecting the tools tab and then Fabrics & Finishes, to help you specify and place your order if required: teknipaint If you require a custom paint color match, you must submit a TekniPaint form. using your own material (COM) If you wish to use your own material on fabric-covered products, you must submit a completed COM form including a sample upholstery and safety testing. A COM Order Information Sheet must also be submitted. This form captures all relevant ordering and tracking information. A COM Request for Yardage Calculation form may be sent to Teknion for preliminary yardage requirements. placing a manual order Complete an Order Cover Sheet with the information we need to fill your order. This is the most important step. If the Order Cover Sheet is not complete and correct, the order may be delayed. noting key requirements If you require that certain pieces share the same locks you will need to specify Set of Keys Alike (SOKL) located in the Price and Product Guide. 7 7 7 7 7 7

introduction index by section 8 8 8 8 8 8 8 8 8 8 8 8 Product Page Section Contents Code No. Introduction Where to find the information you need 5 How to make this guide work for you 6 Cana Overview 10 General Information 11 Application Guide Desks 14 Return and Corner Desks Requiring Shared Support 15 Desks Requiring Shared Support 16 Bridges 18 Credenzas 19 Hutches 20 Storage 22 Edge Details 23 Grommet Location 24 Price Guide Configured Workstations Examples 28 FREESTANDING DESKS Rectangular Desk Shell ZCDRL 36 Bowtop Desk Shell ZCDBL 37 Bullet-Shaped Table Desk ZCDUT 38 P-Shaped Table Desk ZCDP 39 P-Shaped Corner Unit ZCDPC 40 Single Fan-Shaped Table Desk ZCSF 41 Double Fan-Shaped Table Desk ZCDF 42 Corner Desk ZCDCD 44 Computer Table ZCDCT 45 RETURN DESKS Return Shell ZCRL 50 Extended Corner Desk ZCRE 51 Extended Corner Desk with Keyboard Support ZCREK 52 BRIDGES Bridge Top ZCBTBB 58 Bridge Top and Modesty ZCBTB 59 Curved Bridge Top ZCBTCN 60 Curved Bridge Top and Modesty ZCBTCB 61 CREDENZAS Credenza Shell ZCCL 66 Combo Credenza ZCCCP 67 Single Storage Credenza ZCCSS 68 Double Storage Credenza ZCCDS 69 Lateral File Credenza ZCCLF 70 Product Page Section Contents Code No. HUTCHES Storage Hutch for Credenza ZCHS 76 Combination Hutch ZCHM 77 Storage Hutch with Single Opening ZCHO 78 Collator for Desk and Credenza ZCHC 79 Wall Mounted Storage Cabinet ZCHW 80 RECEPTION UNITS Reception Desk ZCGD 86 Reception Bridge ZCGB 87 Reception Credenza ZCGC 88 Reception Return ZCGR 89 STORAGE Under-Worksurface Pedestal ZSPU 94 Mobile Pedestal ZSMP 95 Under-Worksurface Storage Cabinet ZSSU 96 Under-Worksurface Lateral File ZSLU 97 Under-Worksurface Combo Pedestal ZSCPU 98 Bookcase ZCSBK 99 Combination Cabinet ZCSCC 100 Combination Lateral File ZCSCL 101 Wardrobe Storage Cabinet ZCSSC 102 Half Storage Cabinet ZCSSCH 103 ACCESSORIES Desk and Credenza Centre Drawer ZACD 108 Keyboard Tray ZAKT 109 Freestanding Paper Storage Unit ZAFS 110 Grommets ZAG 111 LIGHTING & ELECTRICS Task Light ZATL 116 8 8

introduction index by product Product Page Product Name Code No. Bookcase ZCSBK 99 Bowtop Desk Shell ZCDBL 37 Bridge Top ZCBTBB 58 Bridge Top and Modesty ZCBTB 59 Bullet-Shaped Table Desk ZCDUT 38 Collator for Desk and Credenza ZCHC 79 Combination Cabinet ZCSCC 100 Combination Hutch ZCHM 77 Combination Lateral File ZCSCL 101 Combo Credenza ZCCCP 67 Computer Table ZCDCT 45 Corner Desk ZCDCD 44 Credenza Shell ZCCL 66 Curved Bridge Top ZCBTCN 60 Curved Bridge Top and Modesty ZCBTCB 61 Desk and Credenza Centre Drawer ZACD 108 Double Fan-Shaped Table Desk ZCDF 42 Double Storage Credenza ZCCDS 69 Extended Corner Desk ZCRE 51 Extended Corner Desk with Keyboard Support ZCREK 52 Freestanding Paper Storage Unit ZAFS 110 Grommets ZAG 111 Half Storage Cabinet ZCSSCH 103 Keyboard Tray ZAKT 109 Lateral File Credenza ZCCLF 70 Mobile Pedestal ZSMP 95 P-Shaped Corner Unit ZCDPC 40 P-Shaped Table Desk ZCDP 39 Reception Bridge ZCGB 87 Reception Credenza ZCGC 88 Reception Desk ZCGD 86 Reception Return ZCGR 89 Rectangular Desk Shell ZCDRL 36 Return Shell ZCRL 50 Single Fan-Shaped Table Desk ZCSF 41 Single Storage Credenza ZCCSS 68 Storage Hutch for Credenza ZCHS 76 Storage Hutch with Single Opening ZCHO 78 Task Light ZATL 116 Under-Worksurface Combo Pedestal ZSCPU 98 Under-Worksurface Lateral File ZSLU 97 Under-Worksurface Pedestal ZSPU 94 Under-Worksurface Storage Cabinet ZSSU 96 Wall Mounted Storage Cabinet ZCHW 80 Wardrobe Storage Cabinet ZCSSC 102 9 9 9 9 9 9 9 9 9 9 9 9 9 9

introduction cana overview 10 Cana embodies the beauty and simplicity of modern design. Characterized by clean, crisp lines, the collection offers a complete portfolio of modular furniture that includes desks, credenzas, hutches and gallery units ideal for reception applications. Complementary tables and storage cabinets complete the line. All Cana pencil edge and radius edge components are designed to be fully modular and reconfigurable allowing the user maximum flexibility in present and future office layouts. An affordable, yet distinctive and well-crafted collection, Cana is suitable for a variety of business settings. The modest price contributes to its fresh, modern appeal. 10 10 10 10 10 10 10 10 10 10 10 10 10

introduction general information GENERAL: All dimensional codes (listed throughout the text and under options) are nominal figures they are not actual dimensions. GENERAL CONSTRUCTION: Worksurfaces All Cana worksurfaces are book-matched wood veneers to ensure high aesthetic quality. Cana tops are 1 3/16, panel leg gables 1 3/16, and back panels are 3/4 thick. Available in your choice of 3 species of wood. Walnut, maple and cherry in a variety of finish options. Edge Detail All Cana tops are characterized by their well crafted pencil and Radius edge detail in solid hardwood. Pencil edge profile allows for a nonhanded application. pencil Radius Pedestals Our pedestal drawers are fitted with top quality Accuride hardware - built to last and retain its original performance. Full extension progressive ball bearing slides are included on all box drawers. A pencil tray offers the option of an injected molded high impact polymer with convenience compartments in the top box drawer in every desk or an upgraded solid maple tray. Full extension progressive ball bearing Accuride slides on all file drawers are used for maximum efficiency. File drawers in pedestals include suspended file supports that accommodate letter and legal size hanging folders. For added security, a front gang lock is included on all pull out drawers, i.e. pedestals, lateral file drawers, credenza drawers, etc. Drawer boxes are available in two finishes: 1. Ebony finish constructed of durable black vinyl wrapped high density drawer sides, complete with mitred corner connections. The option of a solid maple finish is available 2. Solid Maple drawer boxes with dove tailed corner connections. Lateral Files All lateral file units have one front lock to lock all drawers. Where indicated, units have an interlocking system which will allow only one drawer to be opened at a time. Lateral file units include suspended file supports that accommodate letter and legal size hanging folders. Hutches All Cana hutches operate on concealed hinges that permit a 110 throw. Solid doors are equipped with a self-closing spring device. Hutches mount on desks, returns, or credenzas without mechanical fasteners; double sided tape keep hutches in place. Hutches placed over desks or credenzas will have a total height of 72". Different Teknion fabrics are also available for the tackboards. Please see pricing in this guide. To view fabric samples, please refer to Teknion's Fabrics & Finishes Program guide. Hardware Four (4) pull styles are offered on drawers and doors to complement your Cana furniture. The integrated finger pulls are finished to match the body. Metal Arch Pulls are finished in Satin Chrome. The Reverse Contemporary pull and Rectangular pull are finished in Platinum or Ebony (Black). Rectangular pulls are zinc die cast and are available in Ebony and Platinum powder coated finishes. Reverse Contemporary pulls are zinc die cast and steel tubing and are also available in Ebony and Platinum powder coated finishes. Locks can be added to hinged doors on hutches, credenzas, wardrobes, etc. Locks on drawers are front-mounted. Suite is keyed alike. Locks are not available on glass doors. Glass doors will include touch latche non-spring hinges. Glass doors are constructed of a 3/4" thick x 1-5/8" wide anodized aluminum frame and 3mm thick frosted glass. Levelers are adjustable to 1" high, and comply with ANSI/BIFMA standards for quality construction. Height-adjustable chrome glides with nylon pads. Ball bearing Accuride drawer slides used exclusively. No counterweights are required for storage units. FABRICS & FINISHES For a list of finishes with codes available for Cana products, please refer to the Wood Casegoods Introduction booklet or Teknion s Fabrics & Finishes Program guide. Please refer to Teknion's Fabrics & Finishes Program guide to view finish sample cards and to order individual finish samples. Custom Wood Stain For custom wood finishes (ZCCWS) add 676 list per match. This is a one time matching charge. Please see the Wood/Casegoods Introduction booklet. OPTIONS Lighting/Accessories In addition to lighting and accessory products offered in this guide, please see Complements: Teknion s Ergonomics & Accessories Program for a listing of additional Keyboard Supports & Accessories. Complements: Teknion s Ergonomics & Accessories Program - is designed to organize and personalize the workspace and promote healthy working postures. Complements products integrate with all Teknion furniture and can be applied to complete and enhance individual workstations, group work areas and public spaces. Grommets Where applicable, worksurface and modesty grommets and wire trays are available to facilitate all your wire management needs. In the hightech office environment, these components are a must to maintain a professional look without compromising function! For some products, the worksurface grommet location can be specified. Please refer to the Accessories portion of this guide for details. SHIPPING All desks, return desks, credenzas and bridges are shipped knocked down. All storage units are shipped assembled. All assembly attachment hardware is included with order. The dealer is responsible for confirming that product will fit in an elevator or other site access. 11 11 11 11 11 11 11 11 11 11 11 11 11 11

application guide

application guide D E S K S..........................................1 4 R E T U R N & C O R N E R D E S K S R E Q U I R I N G S H A R E D S U P P O RT....1 5 13 D E S K S R E Q U I R I N G S H A R E D S U P P O RT...................1 6 B R I D G E S.........................................1 8 C R E D E N Z A S......................................1 9 H U T C H E S........................................2 0 S TO R A G E........................................2 2 E D G E D E TA I L S....................................2 3 G RO M M E T L O C AT I O N S..............................2 4

application guide desks The images below illustrate the available freestanding desk styles. 14 Rectangular, Bowtop and Computer Table can stand alone or they can be used in conjunction with a Bridge or Return Shell 14 14 14 RECTANGULAR DESK SHELL (ZCDRL) Available with a 28" High Only BOWTOP DESK SHELL (ZCDBL) Available with a 28" High or Breakfront (shown) COMPUTER TABLE (ZCDCT) 14 14 14 14 14 14 All Cana desks require a compatibility option when joining to a Bridge or Return Shell. Cana is a modular casegood line however, in order to simplify the order/manufacturing process, a compatibility option has been included in the desk codes. 0 No compatibility (stand-alone desk) 1 20"d left hand compatibility 2 20"d right hand compatibility 3 24"d left hand compatibility 4 24"d right hand compatibility Compatibility ZCDB3LK6030 3 represents left hand, 24" deep Return Shell or Bridge connection. Rectangular Desk Shell used in conjunction with a Bridge Top and 1/2- Height and Credenza Shell with a 1/2-Height Modesty Panel. 14 14 Rectangular Desk Shell used in conjunction with a Bridge Top and 1/2- Height, Corner Desk with Curved User Edge and left handed Return Shell with a 1/2-Height. 14 Pencil Edge with a flat join return Radius Edge with a counter profile join return Compatibility ZCDRL1F8430 1 represents left hand, 20" deep Return Shell or Bridge connection. 14

application guide return & corner desks requiring shared support The images below illustrate Return and Corner Desk styles available that must be used in conjunction with a Bridge, Desk or Return Shell. 15 15 CORNER DESK (ZCDCD) Available with Straight or Curved User Edge (shown) RETURN SHELL (ZCRL) Available with a 1/2-Height (shown), 3/4-Height or Full-Height EXTENDED CORNER DESK (ZCRE) Available with a 1/2-Height (shown), 3/4-Height or Full-Height EXTENDED CORNER DESK WITH KEYBOARD SUPPORT (ZCREK) Available with a 1/2-Height, 3/4- Height (shown) or Full-Height 15 15 15 15 Return Desk Shell with a 1/2-Height used in a right handed position in conjunction with a left handed Extended Corner Desk with Keyboard Support with a 3/4-Height. Return Desk Shell with a 1/2-Height used in a left handed position in conjunction with a Corner Desk, Curved User Edge, a Bridge Top and 1/2-Height and Rectangular Desk Shell with a 28" High. 15 15 15 Return Desk Shell with a 1/2-Height used in a left handed position in conjunction with a Double Fan-Shaped Desk with a 1/2-Height with scallop grommet. Extended Corner Desk with a Full-Height used in a left handed position in conjunction with a Bridge Top and 3/4-Height and left hand Single Fan-Shaped Desk with a 3/4- Height with scallop grommet. 15 15 15 Return Desk Shell, 3/4-Height used in a left handed position in conjunction with a left hand P-Shaped Table Desk, 3/4- Height. 15 15

application guide desks requiring shared support The images below illustrate the available Table Desk styles. 16 16 The Bullet-Shaped, P-Shaped, Single and Double Fan-Shaped Desks must connect to a Bridge or Return Credenza Modesty panel is positioned centered on Bullet and Double Fan-Shaped Desks Modesty panel on P-Shaped Desks is positioned 21" inset on 30" deep desks and 23" inset on 36" deep desks Modesty panel on Single Fan-Shaped Desks is positioned 20" inset on 30" deep desks (users side) and 23" inset on 36" deep desks (users side) Support columns are available in three styles: Round, Rectangular and Elliptical 16 16 16 BULLET-SHAPED TABLE DESK (ZCDUT) Available with a 1/2-Height (shown), 3/4-Height or Full-Height. P-SHAPED TABLE DESK (ZCDP) Available with a 1/2-Height (shown), 3/4-Height or Full-Height. P-SHAPED CORNER UNIT (ZCDPC) Available with a 1/2-Height. 16 16 16 16 SINGLE FAN-SHAPED TABLE DESKS ( ZCSDFT) Available with a 1/2-Height (shown), or 3/4-Height. Right handed desk shown. DOUBLE FAN-SHAPED TABLE DESKS (ZCDDFT) Available with a 1/2-Height (shown), or 3/4-Height. 16 Optional Grommets are centered on the modesty panel. An upcharge will apply if specified. The opening is 1 1/2" high x 6" wide. 16 16 16 1 1/2" 6" 16

application guide desks requiring shared support (continued) 17 Double Fan-Shaped Desk with a 1/2-Height used in a left handed position in conjunction with a left handed Return Shell with a 1/2-Height. Shown with an optional Rectangular Column. Single Fan-Shaped Desk with a 1/2-Height used in a right handed position in conjunction with a Bridge Top and 1/2- Height and Credenza Shell with a 1/2-Height Modesty Panel. Shown with a Rectangular Column. 17 17 17 17 P-Shaped Table Desk with a 3/4-Height used in a left handed position in conjunction with a Return Shell with a 3/4-Height. Shown with a standard Round Column. Bullet-Shaped Table Desk with a 3/4-Height used in a left handed position in conjunction with a Return Shell with a 2/8" High. Shown with a standard Round Column. 17 17 17 P-Shaped Corner Unit used in conjunction with a right handed Return Shell with a 1/2-Height. Shown with a Round Column. 17 17 1-1/2" thick 17 17 4" dia ROUND COLUMN Available in Polished Chrome, Ebony or Veneer 7-1/2" wide 6" wide RECTANGULAR COLUMN Available in Platinum, Ebony or Veneer ELLIPTICAL COLUMN Available in Platinum 2-1/2" thick 17 17

application guide bridges The images below illustrate Bridge styles available that must be used in conjunction with Table Desks, Returns and or Credenzas. 18 Bridge Detail 18 18 18 18 Pencil Edge with a flat join return (Same detail for all desks, Credenzas, Bridges and Return Shells) Radius Edge with a counter profile join return (Standard on Bridge Tops and Return Shells when radius edge is specified) BRIDGE TOP AND MODESTY (ZCBTB) and CURVED BRIDGE TOP AND MODESTY (ZCBTCB) Available with a 1/2-Height (shown), 3/4-Height or 28" High BRIDGE TOP (ZCBTBN) and CURVED BRIDGE TOP (ZCBTCN) 18 18 18 18 18 Curved Bridge Top used in conjunction with a Rectangular Desk Shell with a 28" High and a Credenza Shell with a 1/2-Height. Bridge Top and 3/4" High used in conjunction with a left handed Single Fan-Shaped Desk with a 3/4-Height and a left handed Extended Corner Desk with a Full-Height Modesty Panel. 18 18 18 18 Bridge Top and 3/4-Height used in conjunction with a left handed P-Shaped Table Desk with a 3/4-Height and Credenza Shell with a 1/2-Height. Curved Bridge Top and 1/2-Height used in conjunction with a Rectangular Desk Shell with a 28" High Modesty Panel and a Credenza Shell with a 1/2-Height.

application guide credenzas The images below illustrate examples of how the Credenza Shell is used. The Credenza Shell can stand alone or can be used in conjunction with a Bridge or Return There is no visible gap (1/8") from the underside of the worksurface to the top of the storage unit when storage is positioned inside the Credenza Shell Under-worksurface storage does not attach to the underside of Cana credenzas, desks and returns. This allows for complete modularity and planning flexibility Under-worksurface storage is ordered separately 19 19 19 19 CREDENZA SHELL (ZCCL) Available with a 1/2-Height (shown), 3/4-Height or Full-Height 19 19 19 19 Credenza Shell with a 1/2-Height used in conjunction with a Bridge Top and 3/4-Height and a left handed P-Shaped Table Desk with a 1/2-Height. Credenza Shell with a 28" High used in conjunction with a Storage Hutch for Credenza. 19 19 19 19 Credenza Shell with a 1/2-Height used in conjunction with a Bridge Top and 1/2-Height and a right handed Single Fan-Shaped Desk with a 1/2-Height. Credenza Shell with a 1/2-Height used in conjunction with a Bridge Top and 1/2-Height and a Rectangular Desk Shell with a 28" High. 19 19

application guide hutches Hutches are offered in a number of configurations to suit your office needs. 20 20 20 20 An accessory rail with or without electrics and data is available for Hutches which also conceals wires. The accessory rail is finished in an Anodized Aluminum. Hinged electrical/data box is factory installed on the left side of the Hutch rail and cannot be field installed. It can be repositioned to the right side of the Hutch rail in the field. 6" Shelves may be added to the accessory rail. Refer to Complements: Teknion s Ergonomics & Accessories Program for details. There is 4" clearance from the desk top to the accessory rail reveal. Some Complements accessories can be positioned on this rail. Please see Complements: Teknion s Ergonomics & Accessories Program for a listing of Accessories. A fabric tackboard option can also be specified for Hutches. Refer to Teknion's Fabrics & Finishes Program for a complete panel fabric listing with codes. Hutches will provide an overall height of 72.5". The clearance from the top of the worksurface to the bottom of the valance is 23.5". The interior height of the cabinets is 15". A round grommet is centered on the back of the Hutch under the fixed shelf for wire routing. Locks for doors are optional. 20 20 20 STORAGE HUTCH FOR CREDENZA (ZCHS) COMBINATION HUTCH (ZCHM) STORAGE HUTCH WITH SINGLE OPENING (ZCHSO) Left handed single opening shown. COLLATOR FOR DESK AND CREDENZA (ZCHC) 20 20 20 Without Accessory Rail Accessory Rail Only Accessory Rail with Electrics (left position standard) Accessory Rail with Electrics and Data (left position standard) 20 20 20 20 Number of Doors included for Hutches Closed Doors (ZCHS) 36", 42", 48" widths = 2 doors (odd door hinge on right) 54", 60", 66", 72", 78" & 84" widths = 4 doors (symmetrical) 90", 96", 102" & 108" widths = 6 doors (symmetrical) Combination/Single Opening (ZCHM and ZCHSO) 54", 60", 66", 72", 78" & 84" widths = 2 doors 90", 96", 102" & 108" widths = 4 doors Number of Dividers included for Collators 36", 42" & 48" widths = 0 dividers 54", 60", 66", 72", 78" & 84" widths = 1 divider 90", 96", 102" & 108" widths = 2 dividers Please note that glass doors cannot be retrofitted in the field and are not interchangeable with solid doors. ZCHSO: 54" to 84" wide/2 doors/opening equals half of hutch width. 90" to 108" wide/4 doors/opening equals 1/3 of hutch width.

application guide hutches (continued) 21 21 Hutch width must equal Credenza width. A left handed Storage Hutch with Single Opening used in conjunction with a Return Shell and Bowtop Desk Shell. 21 21 21 21 21 Storage Hutch for Credenza with accessory rail and electrics used in conjunction with a Rectangular Desk Shell, Curved Bridge Top and Credenza Shell. Hutch width must span the overall workstation dimension. In this application, a bridge can be specified with or without Modesty Panel. Hutch must always equal Credenza width. Offset planning requires additional structural support that is available through specials. 21 21 21 21 21 Hutch width must span the overall dimension. Offset planning requires additional structural support that is available through specials. Hutch width must equal Credenza width and cannot be left or right aligned on Credenza. Offset planning requires additional structural support that is available through specials. 21 21

application guide storage Storage products are available with four pull styles. Reverse Contemporary, Rectangular and Metal Arch Pull The Reverse Contemporary Pull and Rectangular Pulls can be specified in Ebony or Platinum finishes. The Metal Arch Pulls are finished in a Satin Chrome finish 22 22 22 22 22 22 Reverse Contemporary Pull (Shown on storage below) Rectangular Pull Metal Arch Pull 22 22 22 22 COMBINATION LATERAL FILE CABINETS (ZCSCL) WARDROBE STORAGE CABINETS (ZCSSC) COMBO CREDENZA (ZCCCP) SINGLE STORAGE CREDENZA (ZCCSS) 22 22 22 22 UNDER-WORKSURFACE LATERAL FILE (ZSLU) UNDER-WORKSURFACE PEDESTAL (ZSPU) BOX, BOX, FILE CONFIGURATION SHOWN UNDER-WORKSURFACE PEDESTAL (ZSPU) FILE, FILE CONFIGURATION SHOWN

application guide edge details = Radius Edge If the radius edge detail is specified, Cana components become handed. The counter profile will be applied to joined edges. See illustrations below. < Radius Edge Counter Profile The counter profile will be applied to joined edges when Radius Edge detail is specified. See illustrations below. Pencil Edge join If the pencil edge detail is specified, it will be applied to all edges of Cana components. No counter profile exists for the pencil edge. This edge detail allows for modular planning with non-handed components. 23 23 23 23 < = < = 23 = 23 < = = 23 23 23 23 23 23 23 23

application guide grommet locations 24 desks credenza, return or back worksurface 24 L Left R Right 3" 3" 26.5" 26.5" 3" 3" L left 3" Center of worksurface R Right 3" 3" 24 24 corner worksurface 24 24 3" 3" 24 24 24 24 24 24 24 24

25 25 25 25 25 25 25 25 25 25 25 25 25 25

price guide

price guide C O N F I G U R E D W O R K S TAT I O N E X A M P L E S.................2 8 D E S K S..........................................3 3 R E T U R N D E S K S....................................4 7 27 B R I D G E S.........................................5 5 C R E D E N Z A S......................................6 3 H U T C H E S........................................7 3 R E C E P T I O N U N I T S.................................8 3 S TO R A G E........................................9 1 A C C E S S O R I E S....................................1 0 5 L I G H T I N G & E L E C T R I C S............................1 1 3

configured workstation examples Workstation 1 5a 28 2 5b 3 6 4 28 1 7 28 28 COMPONENTS Radius Edge Edge 1) 1 ZCDBLK7234 Bowtop Desk Shell, breakfront modesty panel, 72"w x 34"d 3396 3499 2 3 4 ZCBTBH4824 Bridge Top and Modesty, 1/2-Height modesty panel, 48"w x 24"d 794 896 ZCCLF7224 Credenza Shell, 28" modesty panel, 72"w x 24"d 1822 1940 ZCSCLC3720FP Pencil Radius Combination Lateral File, two-high lateral, cabinet with doors and two adjustable shelves 37"d x 20"d, Ebony drawer box 4461 4485 28 5a 5b 6 ZCHS72 Storage Hutch for Credenza, 72"w 3161 3435 Tackboard Grade 1 fabric 459 459 ZSCPU3618RFP Under-Worksurface right handed Combo Pedestal, 36"w x 18"d, Ebony drawer box and Ebony pencil tray 2343 2343 28 7 ZSPUBF1618FP Under-Worksurface Pedestal, box, box, file drawers, 16"w x 18"d, Ebony drawer box and Ebony pencil tray 1585 1585 WORKSTATION TOTAL 18021 18642 6a 28 Workstation 2 28 2 6b 3 4 9 5 28 1 8 7 28 COMPONENTS Radius Edge Edge 1 ZCDUTH7236A Pencil Radius Bullet-Shaped Table Desk, 1/2-Height modesty panel, 72"w x 36"d, Rectangular Column 1955 2213 28 28 28 2 3 4 5 6a 6b 7 8 ZCBTBH3624 Bridge Top and Modesty, 1/2-Height modesty panel, 36"w x 24"d 602 696 ZCDCDS4224 Corner Desk with straight user edge, 42"w x 24"d 1659 1804 ZCBTBH4224 Bridge Top and Modesty, 1/2-Height modesty panel, 42"w x 24"d 721 823 ZCSCLB3724FP Combination Lateral File, one adjustable shelf and storage cupboard, 37"d x 24"d, Ebony drawer box and Ebony pencil tray 4652 4676 ZCHS84 Storage Hutch for Credenza, 84"w 3483 3774 Tackboard Grade 1 fabric 493 493 ZSPU2F1618FP ZSMPBF1618FP Under-Worksurface Pedestal, file, file drawers, 16"w x 18"d, Ebony drawer box and Ebony pencil tray 1307 1307 Mobile Pedestal, box, box, file drawers, 16"w x 18"d, Ebony drawer box and Ebony pencil tray 1776 1776 28 9 ZAKT28 Keyboard Tray 252 252 WORKSTATION TOTAL 16900 17814

configuration workstation examples Workstation 3 5a 2 3 5b 29 1 6 4 29 COMPONENTS Radius Edge Edge Pencil Radius 29 1 2 3 4 5a 5b 6 ZCDPH7230 P-Shaped Table Desk, 1/2-Height modesty panel, 72"w x 30", right handed 1750 2584 ZCBTBT4824 Bridge Top and Modesty, 3/4-Height modesty panel, 48"w x 24"d 835 938 ZCCLT8424 Credenza Shell, 3/4-Height modesty panel, 84"w x 24"d 1882 2011 ZCSSCB3724MP Wardrobe Storage Cabinet, 37"w x 24"d, with metal arch pull 4314 4356 ZCHS84 Storage Hutch for Credenza, 84"w 3483 3774 Tackboard Grade 1 fabric 493 493 ZSCPU3618RMP Under-Worksurface right handed Combo Pedestal, 36"w x 18"d, Ebony drawer box and Ebony pencil tray, metal arch pull 2343 2343 WORKSTATION TOTAL 15100 16499 29 29 29 Workstation 4 5a 29 3 5b 2 6 4 29 1 7 29 Pencil Radius COMPONENTS Radius Edge Edge 1 ZCDBLF8434 Bowtop Desk Top, 28" modesty panel, 84"w x 34"d 2757 2887 29 2 3 4 5a 5b 6 7 ZCBTBH3624 Bridge Top and Modesty, 1/2-Height modesty panel, 36"w x 24"d 602 696 ZCREKT8442R Extended Corner Desk with Keyboard Support, 3/4-Height modesty panel, 84"w x 42"d, right handed 3430 4068 ZCSSCB3724FP Wardrobe Storage Cabinet, 37"w x 24"d 4314 4215 ZCHS84 Storage Hutch for Credenza, 84"w 3483 3774 Tackboard Grade 1 fabric 493 493 ZSLU3618FP ZSPUBF1618FP Under-Worksurface Lateral File, 36"w x 18"d, Ebony drawer box 2040 2040 Under-Worksurface Pedestal, box, box, file drawers, 16"w x 18"d, Ebony drawer box and Ebony pencil tray 1585 1585 WORKSTATION TOTAL 18704 19758 29 29 29 29

configuration workstation examples Workstation 5 4a 30 4b 30 3 2 1 5 30 30 COMPONENTS Radius Edge Edge 1 2 6 ZCDPT8436 Pencil Radius P-Shaped Table Desk, 3/4-Height modesty panel, 84"w x 36"d, Left handed 2216 3171 ZCBTBF6024 Bridge Top and Modesty, 28" modesty panel, 60"w x 24"d 1058 1164 30 3 4a 4b ZCSCLA3724MP Combination Lateral File, two high lateral file with two adjustable shelves, 37"w x 24"d, with metal arch pull 4194 4194 ZCHS96 Storage Hutch for Credenza, 96"w 3843 4130 Tackboard Grade 1 fabric 533 533 30 5 6 ZSCPU3618RMP ZSMPBF1618MP Under-Worksurface Combo Pedestal 36"w x 18"d, right handed, Ebony drawer box and Ebony pencil tray, with metal arch pull 2343 2343 Mobile Pedestal, box, box, file drawers, 16"w x 18"d, Ebony drawer box and Ebony pencil tray, metal arch pull 1776 1776 WORKSTATION TOTAL 15963 17311 30 30 30 30 30 30 30 30

31 31 31 31 31 31 31 31 31 31 31 31 31 31

desks

desks P RO D U C T M A P....................................3 5 P RO D U C T L I S T I N G.................................3 6 33

34 34 34 34 34 34 34 34 34 34 34 34 34 34

desks product map Z C D R L Rectangular Desk Shell Z C D B L Bowtop Desk Shell Z C D U T Bullet-Shaped Table Desk Page 36 Width: 60" to 84" / Depth: 30" & 36 / Height: 29.5" Page 37 Width: 60" - 84" / Depth: 30" & 34" / Height: 29.5" Page 38 Width: 60" to 84" / Depth: 30" & 36 / Height: 29.5" 35 35 28" Modesty Panel 28" High Modesty Panel Breakfront 1/2-Height 3/4-Height Full-Height 35 Z C D P P-Shaped Table Desk Page 39 Width: 72" - 84" / Depth: 30" & 36" / Height: 29.5" Z C D P C P-Shaped Corner Unit Page 40 Width: 72" - 84" / Return Depth: 20" & 24" / Height: 29.5" Z C S F Single Fan-Shaped Table Desk Page 41 Width: 72" - 84" / Depth: 30" & 36" / Height: 29.5" 35 35 1/2-Height 3/4-Height Full-Height 1/2-Height 1/2-Height 3/4-Height 35 Z C D F Double Fan-Shaped Table Desk Z C D C D Corner Desk Z C D C T Computer Table 35 Page 42 Width: 72" - 84" / Depth: 30" & 36" / Height: 29.5" Page 44 Width: 36" - 48" / Return Depth: 20" & 24" / Height: 29.5" Page 45 Width: 36.5" & 42" / Depth: 20" & 24" / Height: 29.5" 35 35 1/2-Height 3/4-Height Straight User Edge Curved User Edge 35 35 35 35 35

desks 36 Xpress Z C D R L Rectangular Desk Shell Width Depth WHAT S INCLUDED 1 desk with modesty panel (as specified), worksurface grommet (if specified), modesty panel grommet (if specified). NOTES Refer to the Application Guide for details on grommet location. Please see finish listing with codes in the Wood/Casegoods Introduction booklet. Not all Width/Depth combinations are available. Please see pricing for exact offering. Xpress Please note that Cana s Radius Edge is not available as Xpress. 36 29.5" 36 PRODUCT OPTIONS Modesty Width Panel Style Depth Finish Edge Detail Worksurface Grommet Style Grommet Surface Location Modesty Panel Grommet 36 36 F Full- Height Modesty 60, 66, 72, 78, 84 30, 36 Natural Veneer Custom Wood Stain CG Pencil CP Radius N None OPA Round Plastic Black OMA Round Metal Black OMB Round Metal Polished Brass OMC Round Metal Satin Chrome OMD Round Metal Polished Chrome OME Round Metal Antique Brass RMA Rectangular Metal Black L Left R Right C Centered N None S Scallop Grommet Centered on Modesty 36 SAMPLE ORDER CODE ZCDRL F 60 36 ZE CG RMA L N 36 DIMENSIONS INCHES / MM PRICING 36 36 36 36 W D Pencil Edge Radius Edge 60 / 1524 30 / 762 1892 2033 66 / 1676 30 / 762 2015 2161 66 / 1676 36 / 914 2123 2277 72 / 1829 30 / 762 2117 2261 72 / 1829 36 / 914 2231 2391 78 / 1981 36 / 914 2343 2511 84 / 2134 36 / 914 2447 2621 If a Worksurface Grommet is specified, If a Grommet is specified, add 70 add 64 Round Plastic add 137 Round Metal add 200 Rectangular Metal To order a Custom Color for Cana please use the code ZCCWS. A one time 779 list charge per color applies. 36 36 36

WHAT S INCLUDED 1 desk with modesty panel (as specified), worksurface grommet (if specified), modesty panel grommet (if specified). NOTES 72" wide desks and wider have a 6" bow while 66" wide desks and less have a 4" bow. Gables on 60" length tops and under are 30" wide. A sawcut reveal at 2 1/2" around the gables and modesty appears on the desk shell with Breakfront. Refer to the Application Guide for details on grommet location. Please see finish listing with codes in the Wood/Casegoods Introduction booklet. Not all Width/Depth combinations are available. Please see pricing for exact offering. Xpress Please note that Cana s Radius Edge is not available as Xpress. desks Z C D B L Bowtop Desk Shell Depth Width Xpress 29.5" 37 37 PRODUCT OPTIONS Modesty Width Panel Style Depth Finish Edge Detail Breakfront Worksurface Grommet Style Full-Height Grommet Surface Location Modesty Panel Grommet 37 F Full Height Modesty K Breakfront Modesty 60, 66, 72, 78, 84 30 34" 34 38" Natural Veneer Custom Wood Stain CG Pencil CP Radius N None OPA Round Plastic Black OMA Round Metal Black OMB Round Metal Polished Brass OMC Round Metal Satin Chrome OMD Round Metal Polished Chrome OME Round Metal Antique Brass RMA Rectangular Metal Black L Left R Right C Centered N None S Scallop Grommet Centered on Modesty 37 37 SAMPLE ORDER CODE ZCDBL F 60 34 ZE CG RMA L N 37 DIMENSIONS INCHES / MM PRICING 37 28" HIGH MODESTY (F) BREAKFRONT MODESTY (K) W D Pencil Edge Radius Edge Pencil Edge Radius Edge 60 / 1524 30 / 762 2137 2260 3014 3122 66 / 1676 30 / 762 2229 2353 3107 3215 66 / 1676 34 / 864 2334 2475 3235 3347 72 / 1829 30 / 762 2352 2468 3228 3331 72 / 1829 34 / 864 2485 2618 3396 3499 78 / 1981 34 / 864 2625 2755 3537 3641 84 / 2134 34 / 864 2757 2887 3669 3768 If a Worksurface Grommet is specified, add 64 Round Plastic add 137 Round Metal add 200 Rectangular Metal If a Grommet is specified, add 70 To order a Custom Color for Cana please use the code ZCCWS. A one time 779 list charge per color applies. 37 37 37 37 37 37 37

desks 38 38 Xpress Z C D U T Bullet-Shaped Table Desk 29.5" Width Depth 1/2-Height WHAT S INCLUDED 1 desk with modesty panel and column (as specified), worksurface grommet (if specified), modesty panel grommet (if specified). NOTES Table desks are priced with a metal round column. See below for potential upcharges. Refer to the Application Guide for details on grommet location. Please see finish listing with codes in the Wood/Casegoods Introduction booklet. Not all Width/Depth combinations are available. Please see pricing for exact offering. Xpress Please note that Cana s Radius Edge is not available as Xpress. Full-Height 3/4-Height 38 PRODUCT OPTIONS Modesty Width Depth Panel Style Column Style Finish Edge Detail Column Finish Worksurface Grommet Style Grommet Surface Location Modesty Panel Grommet 38 38 38 H1/2-Height Modesty T 3/4-Height Modesty F Full-Height Modesty 60, 66, 72, 78, 84 30, 36 A Rectangular R Round E Elliptical Natural Veneer Custom Wood Stain CG Pencil CPRadius Round Column 52 Ebony C9 Polished Chrome Solid Wood (Will match top) Rectangular Column 52 Ebony 60 Platinum Natural Veneer Elliptical Column 60 Platinum N None OPA Round Plastic Black OMA Round Metal Black OMB Round Metal Polished Brass OMC Round Metal Satin Chrome OMD Round Metal Polished Chrome OME Round Metal Antique Brass RMA Rectangular Metal Black L Left R Right C Centered N None S Scallop Grommet Centered on Modesty 38 SAMPLE ORDER CODE ZCDUT F 60 36 A ZE CG 60 RMA L N 38 DIMENSIONS INCHES / MM PRICING 38 38 38 38 38 1/2-HEIGHT MODESTY (H) 3/4-HEIGHT MODESTY (T) FULL-HEIGHT MODESTY (F) W D Pencil Edge Radius Edge Pencil Edge Radius Edge Pencil Edge Radius Edge 60 / 1524 30 / 762 1571 1795 1644 1863 1722 1945 66 / 1676 30 / 762 1660 1888 1724 1951 1765 1990 72 / 1829 30 / 762 1719 1953 1817 2045 1916 2143 72 / 1829 36 / 914 1889 2138 1947 2194 2044 2290 78 / 1981 36 / 914 1959 2211 2044 2299 2150 2401 84 / 2134 36 / 914 2018 2278 2138 2396 2250 2505 If a Wood Round Column is specified, add 702 If a Rectangular Column is specified, add 154 If an Elliptical Column is specified, add 154 If a Worksurface Grommet is specified, add 64 Round Plastic add 137 Round Metal add 200 Rectangular Metal If a Grommet is specified, add 70 To order a Custom Color for Cana please use the code ZCCWS. A one time 779 list charge per color applies. 38

desks WHAT S INCLUDED 1 desk with modesty panel and column (as specified), worksurface grommet (if specified), modesty panel grommet (if specified). NOTES Table desks are priced with a metal round column. See below for potential upcharges. Refer to the Application Guide for details on grommet location. Please see finish listing with codes in the Wood/Casegoods Introduction booklet. Not all Width/Depth combinations are available. Please see pricing for exact offering. Xpress Please note that Cana s Radius Edge is not available as Xpress. 1/2-Height Z C D P P-Shaped Table Desk Depth 'A' Width Xpress 39 29.5" 39 PRODUCT OPTIONS Modesty Width Depth Panel Style 72, 78, 30, 36 84 H1/2- Height Modesty T 3/4- Height Modesty F Full- Height Modesty Orientation L Left Handed (Shown) R Right Handed Column Style A Rectangular R Round E Elliptical Finish Natural Veneer Custom Wood Stain Edge Detail CG Pencil CPRadius Column Finish Round Column 52 Ebony C9 Polished Chrome Solid Wood (Will match top) 3/4-Height Rectangular Column 52 Ebony 60 Platinum Natural Veneer Elliptical Column 60 Platinum Full-Height Worksurface Grommet Style Grommet Surface Location N None L Left OPA Round Plastic Black R Right OMA Round Metal Black C Centered OMB Round Metal Polished Brass OMC Round Metal Satin Chrome OMD Round Metal Polished Chrome OME Round Metal Antique Brass RMA Rectangular Metal Black Modesty Panel Grommet N None S Scallop Grommet Centered on Modesty 39 39 39 39 SAMPLE ORDER CODE ZCDP F 72 36 L A ZE CG 60 RMA L N DIMENSIONS OTHER INCHES / MM PRICING DIMENSION 1/2-HEIGHT MODESTY (H) 3/4-HEIGHT MODESTY (T) FULL-HEIGHT MODESTY (F) W D Pencil Edge Radius Edge Pencil Edge Radius Edge Pencil Edge Radius Edge A 72 / 1829 30 / 762 1750 2584 1814 2660 1849 2700 42 72 / 1829 36 / 914 1840 2757 1900 2833 1934 2874 42 78 / 1981 36 / 914 1995 2876 2034 2934 2147 3112 47.5 84 / 2134 36 / 914 2119 3055 2216 3171 2320 3278 47.5 If a Wood Round Column is specified, add 702 If a Rectangular Column is specified, add 154 If an Elliptical Column is specified, add 154 If a Worksurface Grommet is specified, add 64 Round Plastic add 160 Round Metal add 234 Rectangular Metal If a Grommet is specified, add 83 39 39 39 39 39 39 To order a Custom Color for Cana please use the code ZCCWS. A one time 779 list charge per color applies. 39 39

40 40 desks Xpress Z C D P C P-Shaped Corner Unit 29.5" Depth 'A' Width WHAT S INCLUDED 1 desk with modesty panel and column (as specified), worksurface grommet (if specified), modesty panel grommet (if specified). NOTES Return or Bridge may either be 20" or 24" wide. Table desks are priced with a metal round column. See below for potential up charges. Refer to the Application Guide for details on grommet location. Please see finish listing with codes in the Wood/Casegoods Introduction booklet. Not all Width/Depth combinations are available. Please see pricing for exact offering. Xpress Please note that Cana s Radius Edge is not available as Xpress. 'B' 40 40 40 40 PRODUCT OPTIONS Modesty Width Depth Panel Style H 1/2- Height Modesty 72, 78, 84 20, 24 Orientation L Left Handed R Right Handed (Shown) Column Style A Rectangular R Round E Elliptical Finish Natural Veneer Custom Wood Stain Edge Detail CG Pencil CPRadius Column Finish Round Column 52 Ebony C9 Polished Chrome Solid Wood (Will match top) Rectangular Column 52 Ebony 60 Platinum Natural Veneer Elliptical Column 60 Platinum Worksurface Grommet Style N None OPA Round Plastic Black OMA Round Metal Black OMB Round Metal Polished Brass OMC Round Metal Satin Chrome OMD Round Metal Polished Chrome OME Round Metal Antique Brass RMA Rectangular Metal Black Grommet Surface Location L Left R Right C Centered Modesty Panel Grommet N None S Scallop Grommet Centered on Modesty 40 40 40 40 40 40 SAMPLE ORDER CODE ZCDPC H 72 20 L A ZE CG 52 DIMENSIONS OTHER INCHES / MM PRICING DIMENSIONS W D Pencil Edge Radius Edge A B 72 / 1829 20 / 508 2024 2683 54 42 72 / 1829 24 / 610 2024 2683 54 42 78 / 1981 24 / 610 2220 2844 54 42 84 / 2134 20 / 508 2406 3000 59.5 47.5 84 / 2134 24 / 610 2406 3000 59.5 47.5 If a Wood Round Column is specified, add 702 If a Rectangular Column is specified, add 154 If an Elliptical Column is specified, add 154 If a Worksurface Grommet is specified, add 64 Round Plastic add 137 Round Metal add 200 Rectangular Metal If a Grommet is specified, add 70 To order a Custom Color for Cana please use the code ZCCWS. A one time 779 list charge per color applies. RMA L N 40 40

WHAT S INCLUDED 1 desk with modesty panel and column (as specified), worksurface grommet (if specified), modesty panel grommet (if specified). NOTES Table desks are priced with a metal round column. See below for potential upcharges. Refer to the Application Guide for details on grommet location. Please see finish listing with codes in the Wood/Casegoods Introduction booklet. Not all Width/Depth combinations are available. Please see pricing for exact offering. Xpress Please note that Cana s Radius Edge is not available as Xpress. desks Z C S F Single Fan-Shaped Table Desk 'A' Width Xpress Depth 41 3/4-Height 1/2-Height 29.5" 41 PRODUCT OPTIONS Modesty Width Depth Panel Style H1/2- Height Modesty T 3/4- Height Modesty 72, 78, 84 30, 36 Column Style A Rectangular R Round E Elliptical Orientation L Left Handed (Shown) R Right Handed Finish Natural Veneer Custom Wood Stain Edge Detail CG Pencil CPRadius Column Finish Round Column 52 Ebony C9 Polished Chrome Solid Wood (Will match top) Rectangular Column 52 Ebony 60 Platinum Natural Veneer Elliptical Column 60 Platinum Worksurface Grommet Style N None OPA Round Plastic Black OMA Round Metal Black OMB Round Metal Polished Brass OMC Round Metal Satin Chrome OMD Round Metal Polished Chrome OME Round Metal Antique Brass RMA Rectangular Metal Black Grommet Surface Location L Left R Right C Centered Modesty Panel Grommet N None S Scallop Grommet Centered on Modesty 41 41 41 41 SAMPLE ORDER CODE ZCSF 72 36 A L ZE CG 60 RMA L N H DIMENSIONS OTHER INCHES / MM PRICING DIMENSION 1/2-HEIGHT MODESTY (H) 3/4-HEIGHT MODESTY (T) W D Pencil Edge Radius Edge Pencil Edge Radius Edge A 72 / 1829 30 / 762 1750 2584 1814 2660 42 72 / 1829 36 / 914 1840 2757 1900 2833 47.5 78 / 1981 30 / 762 1934 2791 1976 2846 42 78 / 1981 36 / 914 1995 2876 2034 2934 47.5 84 / 2134 36 / 914 2119 3055 2216 3171 47.5 If a Wood Round Column is specified, add 702 If a Worksurface Grommet is specified, add 64 Round Plastic If a Rectangular Column is specified, add 154 add 137 Round Metal If an Elliptical Column is specified, add 154 add 200 Rectangular Metal If a Grommet is specified, add 70 To order a Custom Color for Cana please use the code ZCCWS. A one time 779 list charge per color applies. 41 41 41 41 41 41 41 41