2 Fox Controls reserves the right to make modifications and gives no guarantee of the accuracy of the information contained herein.
Catalog Index Part Number Description Page # FC-UB Pockets 6 FC-UP Posts 8 FC-DG Fences 10 FC-DG Gates 12 FC-SB Slide Bolts 14 FC-SB Slide Bolt Model Number Key 25 FC-DV Hand Safety Enabling Device 26 FC-ESTOP Emergency E-Stop 28
4 Industrial Barrier Guards Design Features Designed to meet and exceed the requirements of regualtory standards: Occupational Safety and Health Administration (OSHA) 1910.217 American National Standards Institute (ANSI) B11.19 Robotic Industries Association (RIA) R15.06 American Society of Mechanical Engineers (ASME) B15.1 European Standard EN953 Rugged steel solution withstands abusive conditions Various insert options reduce exposure to harsh environments Pocketed modular design makes machine servicing easy while maintaining the structural integrity of the guarding solution Designed to be compatible with all industrial safety devices Standard sizes make design and installation simple
5 Application Examples Guarding moving parts of a hazardous machine Controlling entry to an automated work cell and limiting access to hazardous machines Protecting from in-running nip points of a conveyor
6 FC-UB Modular Pocket Features Reliable, heavy-duty solution to hardguarding industrial applications Designed specifically for industrial environments Pocketed modular design for easy installation Modularity of posts and pockets make servicing machine simple Optional alignment system recommended for use on irregular factory floors and around entry gates Applications Limit access to hazardous machines Control entry to automated work cells Guard moving parts of machines Prevent access to robot cells Protect from in-going nip points of conveyors and machinery Contain thrown or ejected parts
7 FC-UB Modular Pocket Dimensions Width At Base 6 Square 6.00 4.25 Height Standard 5 4.25 6.00 Floor Mounting Holes Threaded Alignment Holes Post Mounting Holes 5.00
8 FC-UP Universal Post Features Reliable, heavy-duty solution to hardguarding industrial applications Designed specifically for industrial environments Pocketed modular design for easy installation Modularity of posts and pockets make servicing machine simple Standard and Custom sizes available Black end caps standard Applications Limit access to hazardous machines Control entry to automated work cells Guard moving parts of machines Prevent access to robot cells Protect from in-going nip points of conveyors and machinery Contain thrown or ejected parts 11N026 Rippburger Rd. Elgin, IL 60124 www.foxcontrols.com P: 847-464-5096 F: 847-464-2754
9 FC-UP Dimensions Width Standard 2.50 x 2.50 Height Standard 72 & 96 Custom Available upon request Technical Data Frame Material Color 0.180 Stee l OSHA Safety Yellow Available Mounting Options Fence Field Post Corner Post T-Post 2.50 For mounting field fence in straight runs For mounting field fence at right angles For mounting field fence at 3-way or inside corners 2.50 Fence Mounting Holes Universal Post Height Gate Devices Swing Post Latch Post Universal Post For swing gate mounting (hinge side) For gate switch mounting (open side) For mounting devices (ie. safety light curtains, mirrors, etc.) [NOTE: Does not come pre-drilled for devices] Pocket Mounting Holes
10 FC-DG Fence Features Reliable, heavy-duty solution to hardguarding industrial applications Designed specifically for industrial environments Pocketed modular design for easy installation Modularity of posts and pockets make servicing machine simple Standard and Custom sizes available Flat black mesh for easy visibility of protected area Other inserts available for shields Applications Limit access to hazardous machines Control entry to automated work cells Guard moving parts of machines Prevent access to robot cells Protect from in-going nip points of conveyors and machinery Contain thrown or ejected parts, hazardous substances (coolants, oils), noise and radiation (weld flash)
11 FC-DG Dimensions Width Standard 36 (Post Pitch Center to Center) Custom From 4.0 to 45.5 Width (Center to Center) Fence Height Standard 72 & 96 Custom Available upon request Sweep Standard 7 Custom From 1 to 12 Technical Data Frame Material Color Insert Material Options Wire Mesh Opening Material Color 1-1/2 x 1-1/2 x 3/16 Angled Steel OSHA Safety Yellow 2 x 2 Square or 1 x 1 Square 0.156 dia. steel Flat Black Height Sweep Note: Posts and Pockets sold separately Shielding Material 1/8 Lexan Margard (Splatter Containment) 1-1/4 Lexan Lexgard (Ballistic Containment) Amber Weld Guard (Weldflash Protection) 2 Noise Guard (Noise Abatement)
12 FC-DG Features Reliable, heavy-duty solution to hardguarding industrial applications Swing Gate Designed specifically for industrial environments Pocketed modular design for easy installation Modularity of posts and pockets make servicing machine simple Standard and Custom sizes available Flat black mesh for easy visibility of protected area Orange frame color for easy identification of entry / exit points to machine cells Rugged slide bolt design reduces misalignment and protects gateswitch devices from abuse Applications Limit access to hazardous machines Control entry to automated work cells Guard moving parts of machines Prevent access to robot cells Protect from in-going nip points of conveyors and machinery Contain thrown or ejected parts, hazardous substances (coolants, oils), noise and radiation (weld flash)
13 FC-DG Dimensions Width Height Standard 36 (Post Pitch Center to Center) Custom From 4.0 to 45.5 Standard 72 & 96 Custom Available upon request Sweep Standard 7 Custom From 1 to 12 Height Slide Bolt Assembly (Not included) Width (Center to Center) Swing Gate Technical Data Frame Material 1-1/2 x 1-1/2 x 3/16 Angled Steel Color OSHA Orange Insert Material Options Wire Mesh Opening 2 x 2 Square or 1 x 1 Square Material 0.156 dia. steel Color Flat Black Sweep Note: Posts and Pockets sold separately Gate Open Shielding Material 1/8 Lexan Margard (Splatter Containment) 1-1/4 Lexan Lexgard (Ballistic Containment) Amber Weld Guard (Weldflash Protection) 2 Noise Guard (Noise Abatement) Gate Closed
14 FC-SB Slide Bolts Features Durable, heavy-duty solution to interface safety gateswitches with industrial hardguarding applications Designed specifically for industrial environments Built to protect and extend the life of safety gatswitches by aligning actuator before engaging Built in handle for easy use Actuator secured using tamper-proof hardware Hardened steel tongue aligns door before actuating the safety device Lock Open feature prevents system from being reset with personnel inside Actuator retracts to prevent damage or injury Designed to function with any commercially available safety gateswitch
15 FC-SB Slide Bolts Hardened steel tongue engages before the actuator, alingning the door and preventing damage to the gateswitch device Built in handle for easy use Actuator secured to assembly with tamperproof hardware Actuator retracts to prevent damage and injury to personnel Lock Open feature accomodates up to three personal locks to prevent safety system from being reset with personnel inside
16 FC-SB TX Solenoid Gate Switch FC-SB-ETX Slide Bolts
17 FC-SB TZ Solenoid Gate Switch FC-SB-ETZ Slide Bolts
18 FC-SB Slide Bolts NZ Gate Switch FC-SB-ENZ
19 FC-SB Slide Bolts STI TL8012-S Solenoid Gate Switch FC-SB-S8012
20 FC-SB Fortress AutoLok Solenoid Gate Switch FC-SB-FAL Slide Bolts
21 FC-SB Fortress AutoStop Gate Switch FC-SB-FAS Slide Bolts
22 FC-SB Honeywell GK Solenoid Gate Switch FC-SB-HGK Slide Bolts
23 FC-SB Slide Bolts Guard Master TLS-GD2 Solenoid Gate Switch FC-SB-GMTLS
24 FC-SB Banner SI-LS42 Solenoid Gate Switch FC-SB-BLS Slide Bolts
25 FC-SB Slide Bolt Model Number Key - SB - ETX - L - A - C Slide Bolts VOLTAGE (Optional - Only Required with Switch) A 110 VAC D 24 VDC DIRECTION L Left Hand R Right Hand CONNECTOR OPTION (Optional - Only Required with Switch) C Connector prewired for use with Safe-T-Station N No Connector SWITCH TYPE Brand Model Locking ETX Euchner TX Yes ETZ Euchner TZ Yes ENZ Euchner NZ No S8012 STI TL8012-S Yes FAL Fortress AutoLok Yes FAS Fortress AutoStop No FA1S1 Fortress AKA-SKA Yes HGK Honeywell GK Yes GMTLS Guard Master TLS-GD2 Yes BLS Banner SI-LS42 Yes BQM Banner SI-QM100 Yes
Hand Safety Enabling Devices LEDs Momentary Pushbuttons 3 position Trigger switch These Hand Safety Enabling Devices come with a trigger mounted 3- position switch, which meets the requirements of ANSI B 11.19-2003, Section 12.3.1.3. The Enabling Device can be used to activate a Bypass Mode in the Safety Circuit. Green and red L ED s indicate switch position per ANSI B11.19-2003, Section 12.3.1.5. The green LED is illum inated when the switch is in the cent er position, the red when it is not. The Enabling Device has front mounted momentary pushbuttons to allow machine jogging while in a bypass mode of operation. Part # FC-DV-ED8P-C-2B Description Enabling Device w/ 8 Pin Connector & 2 Pushbuttons
Hand Safety Enabling Device -DV Technical Data Fox Controls Hand Safety Enabling Device FC-DV-ED8P-C-2B Connector Detail
28 Emergency Stop FC-ESTOP-20 Features: Emergency Enclosure Self Contained Category 4 Safety Control System Only Requires 120 VAC Supply Interfaces with your existing Motor Starter 11N026 Rippburger Rd. Elgin, IL 60124 www.foxcontrols.com P: 847-464-5096 F: 847-464-2754
FC-ESTOP-20 Emergency Stop 11N026 Rippburger Rd. Elgin, IL 60124 www.foxcontrols.com P: 847-464-5096 F: 847-464-2754