87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 630 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 2 6. CONFORMITY 3 7. EQUIPMENTS AND ACCESSORIES 3 8. CURVES 5 1. USE DPX 3 "moulded case" offers optimal solutions to answer protection requirements of tertiary and industrial installations. 3. DIMENSIONS (NEXT) Front view 2. RANGE Plug-in version, rear terminals: 3. DIMENSIONS Implantation 3P 4P Draw-out version with automatic auxiliary contacts: 1/8
4. OVERVIEW 4.1 Supplied Connection plates for bars : Width 32 mm max Seals for adjustment (supplied) 5.1 Main pieces constituting the circuit breaker 4.2 Mounting possibility On plate : Vertical Horizontal Supply invertor type 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS Breaker DPX3 630 (from 36 to 100 ka) Nominal current 250-630 Poles 3-4 Rated insulation voltage Ui 800 Rated operating voltage (50/60Hz) Ue (V) 690 Rated impulse withstand current Uimp (kv) 8 Nominal frequence (Hz) 50-60 Temperature of functioning ( C) 40-50 C Endurance (cycles) mechanical 20000 Endurance (cycles) mechanical with motor control 10000 Endurance (cycles) electrical at In 5000 Endurance (cycles) electrical at 0,5 In 8000 Utilization category A Suitable for isolation Yes Type of protection Thermal-magnetic Magnetic adjustable 5-10x In Thermic adjustable 0,8-0,9-1 x In Dimensions (wxhxd) (mm) 43,5(xP)x260x105 Neutral protection for 4P version (%Ith) 100 DPX3-I 630 Switches DPX3-I Uninterrupted nominal current Iu (A) 400-630 Rated closing capacity on short-circuit Icm (ka) 8-14 Nominal current of use Ie (A) 400/630-AC23A (690Vac) 400/630-DC23A (250Vdc) Short-time resistive current Icw(kA) for 1s 5-8 Isolated voltage Ui (Vac) 800 Maximum rated operating voltage Ue (Vac/dc) 690/250 Rated impulse withstand voltage Uimp (kv) 8 Nominal frequency (Hz) 50-60 Operating temperature ( C) from -25 to + 70 Endurance electrical/mechanical 5000/20000 Dimensions (wxhxd) (mm) 140x260x105(3P) 183x260x105(4P) Weight (kg) 4,5(3P)-6,4(4P) 5.2 Breaking capacity (ka) Breaking capacity (ka) & Ics 3&4P 3&4P 3&4P 3&4P Ue/Icu F N H L 220/240V ac 70 100 120 150 380/415V ac 36 50 70 100 440/460V ac 30 40 60 70 480/550V ac 25 30 40 50 600V ac 20 22 25 28 690V ac 14 18 20 22 Ics(% Icu) 100 100 100 70 5.3 Nominal current (In) at 40 C (A) Assigned current trip thermal magnetic In (A) L1-L2-L3 N L1-L2-L3 N 250 250 250 1250-2500 1250-2500 320 320 320 1600-3200 1600-3200 400 400 400 2000-4000 2000-4000 500 500 500 2500-5000 2500-5000 630 630 630 3150-6300 3150-6300 5.4 Power losses per pole under In Power losses per pole (W) DPX³ 630 Rated current (A) 250 320 400 500 630 Pole Phase Neutral Phase Neutral Phase Neutral Phase Neutral Phase Neutral Neutral current - - - 160-250 - 320-400 Cage terminals 19,2-16,4 16,5 25,6 18,9 23,6 28,7 37,3 21,2 2/8
Power losses per pole (W) DPX³-I 630 Rated current (A) 400 630 Pole Phase Neutral Phase Neutral Neutral current - - - - Cage terminals 25,6-37,3-5.5 FUNCTIONING IN PARTICULAR CONDITIONS 5.5.1 Temperature Ambient temperature DPX³ 630 In (A) Influence of ambient temperature C 10 20 30 40 50 60 70 250 336 307 279 250 250 222 193 320 416 384 352 320 320 288 256 400 475 460 425 400 400 360 320 500 600 550 525 500 500 455 410 630 700 683 650 630 630 580 530 For derating temperature with other configuration, see table A. 5.5.2 Altitude DPX³ Rated current (A) Rated voltage (V) 5.5.3 Use in 400 Hz See table B. 6. CONFORMITY IEC 60 947-2 EN 60947-2 EN 60947-3 (for switches DPX 3 -I) NF C VDE BS UNE CEI 6.1 MARKING Altitude (m) 2000 3000 4000 5000 1 x In 0,98 x In 0,93 x In 0,9 x In 690 590 520 460 7. EQUIPMENTS AND ACCESSORIES 7.1 Earth leakage modules: Earth leakage characteristics for DPX3 630 Standard with Led Type A-S A-S Uninterrupted nominal current Iu (A) 630 630 Rated earth leakage current Idn (A) 0,03 3 0,03 3 Rated isolated voltage Ui (V ac) 500 500 Rated operating voltage Ue (V ac) (50-60Hz) 500 500 Operating voltage (V ac) (50-60Hz) 230 500 110 500 Nominal frequency (Hz) 50-60 50-60 Operating temperature ( C) from -25 to from -25 to 70 70 Trip electronic electronic Earth leakage protection adjustments Idn (A) 0,03 3 0,03 3 Earth leakage time adjustments (s) 0-0,3-1-3 0-0,3-1-3 Earth leakage breaking capacity Idm (% Icu) 60 60 Mounted side-by-side no no Montage underneath yes yes 50% Earth fault detection contac Idn no yes Clip on rail DIN 35 no no Dimensions moulded case (wxhxd) (mm) 4P 183x152x105 183x152x106 (Power losses, see table 5.4) Standard 400A 3P ref. 260 60 4P ref. 260 61 630A 3P ref. 260 64 4P ref. 260 65 LED version 400A 4P ref. 260 63 630A 4P ref. 260 67 7.2 Releases : shunt releases (Power consumption= 300 VA) with voltage: 24 V ~ et = ref. 422 239 48 V ~ et = ref. 422 240 110 V ~ et = ref. 422 241 230 V ~ et = ref. 422 242 400 V ~ et = ref. 422 243 undervoltage releases (Power consumption = 5 VA) with voltage : 24 V = ref. 422 244 24 V ~ ref. 422 245 48 V = ref. 422 246 110 V ~ ref. 422 247 230 V ~ ref. 422 248 400 V ~ ref. 422 249 " Tropical climate" : execution II (all climates) according to guide UTE C63100 time-lag undervoltage releases (800 ms) : Time-lag modules with voltage : 230Vac ref. 261 90 400Vac ref. 261 91 Universal Release ref. 422 623 3/8
7.3 Auxiliary contact Changeover switch 3 A 240 V ~ ref. 421 011 For signalling the state of the contacts or opening of the DPX 3 on a fault: Auxiliary contact (standard) C Fault signal S Auxiliary contact Nominal voltage (Vn ) (Va.c/d.c.) 24 to 250 Intensity (A) 24 Vd.c. 5 48 Vd.c. 1,7 110 Vd.c. 0,5 230 Vd.c. 0,25 110 Va.c. 4 230/250 Va.c. 3 Configurations: DPX 3 630 2 auxiliary contact + 1 fault signal 7.4 Rotary handles : Direct on DPX 3 Standard (black) ref. 262 41 For emergency use (red / yellow) Adapting on standard handle ref. 422 238 Vari-deph handle IP55 Standard (black) ref. 262 81 For emergency use (red / yellow) Adapting on standard handle ref. 262 82 Locking accessories Eurolocks for vari-deph handle ref. 262 92 Profalux for vari-deph handle ref. 262 93 Ronis for vari-deph handle ref. 262 94 Eurolocks for direct handle ref. 262 25 7.5 Motor-driven handles : Front operated Voltage 24 V ~ et = ref. 261 40 Voltage 48 V ~ et = ref. 261 41 Voltage 110 V ~ ref. 261 42 Voltage 230 V ~ ref. 261 44 Locking accessories Ronis locking ref. 261 59 Profalux locking ref. 261 58 7.6 Mechanical accessories : Insulated shields Set of 3 ref. 262 30 Sealable terminal shields Set of 2 3P ref. 262 44 Set of 2 4P ref. 262 45 Terminal covers to guarantee IP20 Set of 2 3P ref. 422 234 Set of 2 4P ref. 422 235 Padlocks Accessories for locking in open position ref. 262 40 7.7 Connection s accessories : Cage terminals Set of 4 terminals for cables 300mm² max (rigid) or 240mm² max (flexible) Cu/Al ref. 262 50 Set of 4 terminals for cables 240mm² max (rigid) or 180mm² max (flexible) Cu/Al ref. 262 51 Extended front terminals Set of 4 ref. 262 47 Spreaders Set of 3 (incoming or outgoing 3P) ref. 262 48 Set of 4 (incoming or outgoing 4P) ref. 262 49 Rear terminals (use to connect fixed version with front terminals into fixed version with rear terminal) Set of swivel terminals, incoming or outgoing 3P ref. 263 50 4P ref. 263 51 Set of flat rear terminals, incoming or outgoing 3P ref. 263 52 4P ref. 263 53 Terminals for plug-in & draw-out base Set of 6 terminals (3P) ref. 422 220 Set of 8 terminals (4P) ref. 422 221 7.8 Plug-in version (A plug-in is a DPX 3 fitted with tulip contacts mounted on a base) Tulip contact Set of tulip contact (supplied with an incoming/outgoing protective cover) 3P ref. 265 50 4P ref. 265 51 Bases front terminal mounting base 3P ref. 422 222 4P ref. 422 223 flat rear terminal mounting base 3P ref. 422 224 4P ref. 422 225 Bases with earth leakage underneath mounting (4P) front terminal mounting base ref. 422 226 flat rear terminal mounting base ref. 422 227 Accessories Set of 2 extractor handle ref. 422 228 Set of connectors (8 pin) ref. 263 99 Set of connectors (24 pin 3x8 or 2x12) ref. 422 229 Signalling contact (plugged-in / drawn-out) ref 265 74 Supporting plate for plug-in version ref. 422 237 7.9 Draw-out version (A DPX 3 draw-out version is a plug-in DPX 3 fitted with a "Debro-lift" mechanism which can be used to withdraw the DPX 3 while keeping it on its base) «Débro-lift» mechanism For DPX 3 base only 3P ref. 265 66 4P ref. 265 67 For DPX 3 base with earth leakage module ref. 265 68 Key lock for «Debro-lift» mechanism For DPX 3 only Ronis ref. 265 76 Profalux ref. 263 48 For motorised DPX 3 or with rotary handle Ronis ref. 265 78 Profalux ref. 265 77 Accessories for «Debro-lift» mechanism Isolated handle for drawing-out ref. 265 75 Signalling contact (plugged-in / drawn-out) ref. 265 74 Supporting plate for draw-out version ref. 422 236 Automatic auxiliary contacts (6 pin) for draw-out version ref. 422 230 (2 pieces installable max.) 4/8
8. CURVES 8.1 OPERATING CURVE 5/8
8.2 Pass-through specific energy characteristic curve 6/8
8.3 Cut-off peak current characteristic curve 7/8
A) Derating Temperature and configurations B) Correction factor for adjustment for use at 400 Hz C) Breaking capacity in DC 8/8