Frame Type Plug-in Units

Frame Type Plug-in Units

KitsMain Catalogue Frame type plug-in units Kits OVERVIEW MIN KTLOG Cabinets....... 1 Wall mounted cases......... ccessories for cabinets and wall mounted cases.. Climate control.. 4 Electronics cases......... 5 Subracks/ 19" chassis..... 6 Front panels, plug-in units.... 7 Systems....... 8 Power supply units.......... 9 Backplanes.... 10 Connectors, front panel component system....... 11 ppendix..... 1 19" modules are mechanical components that serve to carry one or more circuit boards. The boards housed in a module are thus combined into a larger electronic function unit that is selfcontained and testable. Mechanical dimensions conform to IEC 6097--101 / IEEE 1101.1/11 standards, i.e. the so-called 19" standard. These function units are integrated into the subrack or case; their dimensions likewise form a component of IEC 6097--101 / IEEE 1101.1/11. The dimension obligations of the standard give only little freedom for individual design of frame type plug-in units. The aim is therefore to make optimum use of what freedoms regarding dimensions it does allow, e.g. to maximise the internal space of a plug-in unit and thus create maximum space for electronic components, or to ensure optimal EMC shielding with minimum loss of mounting space to the shielding components 0480700 Standards IEC 6097--101 / IEEE 1101.1/11 Product selection kits Width 5 HP 6 HP 7 HP 8 HP 10 HP 1 HP 14 HP 1 HP 8 HP 4 HP Height in U 6 6 6 6 6 6 6 6 6 6 Frame-type plug-in units PRO x x x x x x x x x x x x x x Frame type plug-in units PRO with cooling x x x x x x fins Frame-type plug-in units PRO with hood x x x x x x x x x x x x HF frame-type plug-in units x x x x x x 7.64 nvent.com/schroff SCHROFF PRODUCT ELECTRONICS CTLOG PROTECTION 05/018

Frame type plug-in units Kits OVERVIEW Overview...... 7.64 KitsMain Catalogue FRME-TYPE PLUG-IN UNITS TO HOUSE PRINTED BORDS For PCBs in euroboard format Kits or configuration from single components Front panels: unshielded or EMC shielded Introduction: Product features, product comparison.... 7.66 FRME-TYPE PLUG-IN UNITS PRO Kit or configuration from single components in U and 6 U, 8... 4 HP Shielded and unshielded versions Side panel with/without cooling fins Frame type plug-in units PRO Frame type plug-in units PRO, shielded/ unshielded...... 7.68 04808008 For one or several PCBs or one or several connectors Various possibilities for combining the individual components PLUG-IN UNITS PRO WITH HOOD Kit in U and 6 U, 5... 14 HP Shielded and unshielded versions For one PCB with one connector Frame-type plug-in units PRO with hood, unshielded...... 7.85 04808009 HF FRME-TYPE PLUG-IN UNITS Kit or configuration from single components in U, 7... 8 HP For shielding against high-frequency radiation Tube with cooling fins, in extruded aluminium For one or more PCBs, one or more connectors HF plug-in units Kits U.......... 7.89 ServicePLUS configuration.... 7.90 0489005 ccessories for plug-in units see page........ 7.5 SERVICEPLUS e.g. individual configuration and assembly e.g. modification (special colours) e.g. customised solutions with modified frame-type plug-in units (special sizes) nvent.com/schroff 7.65

Frame type plug-in units THE NEW GENERTION Frame type plug-in units PRO IntroductionMain CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days The frame type plug-in units conform to IEC 6097--101. They serve to house standardized PCBs and bulky components. Because of the standardized assembly dimensions the frame type plug-in units can be mounted on guide rails, to be pushed into the subrack, in any order and using any plug-in unit. The robust l extrusion construction is especially suited for heavy components and the rough handling as "Field Replaceable Unit". Details Rear view: frame type plug-in unit mounted in subrack 0480801 04808014 The EMC version of the front panel was improved for frequencies over 1 GHz by using a conductive textile gasket and a robust U-shaped front panel Push-in cover plates for quick fitting Handles to be bolted-on from the front, easy mounting Optimised air flow rate thanks to slender extruded side panels and large perforation areas in the cover plates, a perforation degree of up to 65 % is possible cover plate versions (solid, perforated, perforated for guide rail mounting) Width of frame-type plug-in units from 8 HP 0480801 Board for slot 1 fixes to the side panel; further boards are fixed with guide rails To achieve a higher airflow rate, exceptionally slender guide rails are used to fix the boards From slot guide rails can be positioned in HP grid Easy fixing of the boards in the frame-type plug-in units; only x 1 screws per board are needed to fix the boards rear panel variants (solid, for one DIN connector, for multiple DIN connectors) The flat rear panel enables simple reworking (e.g. punching); the rear panel can be removed without removing the PCBs For better EMC contacting between rear panel and cover plate and to increase the stability of broad frame-type plug-in units, a rear panel retainer is available Use of Torx screws for secure machine mounting Note: Frame type plug-in units cannot be combined with guide rails for CompactPCI or VME64x applications (width 4 HP) Sliding cover plates 04808011 04808016 7.66 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units COMPRISON: FRME-TYPE PLUG-IN UNITS PRO/FRME-TYPE PLUG-IN UNITS PRO WITH HOOD Frame-type plug-in units PRO Text Frame-type plug-in units PRO with hood (shielded) 0480815 04808115 For one or multiple PCBs Modular, at least 6 components (front panel, side panels, cover plates, rear panel) Identical front panel and front handle Only for one PCB Only components (front panel, left hand side panel, hood with integrated rear panel) Identical front panel and front handle Identical left hand side panel (l extrusion) Identical left hand side panel (l extrusion) Side panel on right hand side (l extrusion) Hood on right hand side (l sheet) Separate rear panel Hood includes rear panel Widths from 8 HP to 4 HP Guiding in subrack/case with 4 guide rails; left and right side panels rear panel variants (for one DIN connector, for multiple DIN connectors, rear panel without cut-out) Widths from 5 HP to 14 HP Guiding in subrack/case with guide rails; left side panel 1 rear panel variant (for one DIN connector) Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.67

Frame type plug-in units PRO FRME TYPE PLUG-IN UNITS PRO, U KITS, FRONT PNEL SHIELDED (TEXTILE GSKET) Frame type plug-in units PRO Extruded side panels with groove to rigth and left, to insert a PCB (board position in accordance with standard in left side panel only) board depths: 160 mm and 0 mm cover plate versions with perforation, for guide rails (5a, airflow rate approx. 60 %); please order guide rails separately Without perforation (5b) rear panel versions With cut-out for one connector (a, in accordance with EN 6060-, DIN 4161) With cut-out for multiple connectors (b, in accordance with EN 6060-, DIN 4161) DELIVERY COMPRISES (Kit) Illustration shows 1 HP width, side panel depth 167 mm 04811007 Item Qty Description 1 1 Front panel, U profile anodised, rear conductive, alignment pin pressed-in 1 Handle, grey, PPE, UL 94 V-1 a 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for one connector, incl. PCB fixing (slot 1) b 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for multiple connectors, incl. PCB fixing (slot 1 and slot ), incl. guide rails rear panel fastener c 4 Side panel, l extrusion, colourless passivated, with groove for one PCB 5a Cover plate, St, zinc-plated, 1.0 mm, with perforation 5b Cover plate, St, zinc-plated, 1.0 mm, without perforation 6 1 EMC sealing (textile) 7 1 ssembly kit ORDER INFORMTION Rear panel Height Width Cover plate without perforation Cover plate with perforation, for guide rails 5b 5a 5a/5b a 04808055 04808054 167 mm deep 7 mm deep 167 mm deep 7 mm deep U HP Part no. Part no. Part no. Part no. 8 481-408 481-458 481-08 481-58 10 481-410 481-460 481-10 481-60 1 481-41 481-46 481-1 481-6 14 481-414 481-464 481-14 481-64 1 481-41 481-471 481-1 481-71 6 1 a/b 8 481-48 481-478 481-8 481-78 0480805 4 481-44 481-49 481-4 481-9 8 481-08 481-58 4 b c 10 481-10 481-60 1 481-1 481-6 14 481-14 481-64 1 481-1 481-71 8 481-8 481-78 04808050 0480805 4 481-4 481-9 Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.74 7.68 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO FRME TYPE PLUG-IN UNITS PRO, 6 U KITS, FRONT PNEL SHIELDED (TEXTILE GSKET) Illustration shows 1 HP width, side panel depth 167 mm 04811008 Extruded side panels with groove to rigth and left, to insert a PCB (board position in accordance with standard in left side panel only) board depths: 160 mm and 0 mm cover plate versions With perforation, for guide rails (5a, airflow rate approx. 60 %), please order guide rails separately Without perforation (5b) rear panel versions With cut-out for one connector (a; in accordance with EN 6060-, DIN 4161) With cut-out for multiple connectors (b; in accordance with EN 6060-, DIN 4161) 6 U has cut-outs for connectors at top and bottom DELIVERY COMPRISES (Kit) Item Qty Description 1 1 Front panel, U profile anodised, rear conductive, alignment pin pressed-in 1 Handle, grey, PPE, UL 94 V-1 a 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for one connector, incl. PCB fixing (slot 1) b 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for multiple connectors, incl. PCB fixing (slot 1 and slot ), incl. guide rails rear panel fastener c 4 Side panel, l extrusion, colourless passivated, with groove for one PCB 5a Cover plate, St, zinc-plated, 1.0 mm, with perforation 5b Cover plate, St, zinc-plated, 1.0 mm, without perforation 6 1 EMC sealing (textile) 7 1 ssembly kit ORDER INFORMTION Rear panel Height Width Cover plate without perforation Cover plate with perforation, for guide rails 5a/5b 6 1 04808055 04808054 167 mm deep 7 mm deep 167 mm deep 7 mm deep U HP Part no. Part no. Part no. Part no. 6 8 481-908 481-958 481-708 481-758 a 6 10 481-910 481-960 481-710 481-760 6 1 481-91 481-96 481-71 481-76 6 14 481-914 481-964 481-714 481-764 6 1 481-91 481-971 481-71 481-771 6 8 481-98 481-978 481-78 481-778 04808117 6 4 481-94 481-99 481-74 481-79 6 8 481-808 481-858 6 10 481-810 481-860 a/b b 6 1 481-81 481-86 4 6 14 481-814 481-864 6 1 481-81 481-871 c 6 8 481-88 481-878 04808056 04808059 6 4 481-84 481-89 5b 5a Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.74 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.69

Frame type plug-in units PRO FRME-TYPE PLUG-IN UNITS PRO, U KITS, FRONT PNEL UNSHIELDED Extruded side panels with groove to rigth and left, to insert a PCB (board position in accordance with standard in left side panel only) board depths: 160 mm and 0 mm cover plate versions with perforation, for guide rails (5a, airflow approx. 60 %); please order guide rails separately Without perforation (5b) rear panel versions With cut-out for one connector (a, in accordance with EN 6060-, DIN 4161) With cut-out for multiple connectors (b, in accordance with EN 6060-, DIN 4161) DELIVERY COMPRISES (Kit) Illustration shows 1 HP width, side panel depth 167 mm 04811009 Item Qty Description 1 1 Front panel, l,.5 mm, anodised, cut edges plain 1 Handle, grey, PPE, UL 94 V-1 a 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for one connector, incl. PCB fixing (slot 1) b 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for multiple connectors, incl. PCB fixing (slot 1 and slot ), incl. guide rails rear panel fastener c 4 Side panel, l extrusion, colourless passivated, with groove for one PCB 5a Cover plate, St, zinc-plated, 1.0 mm, with perforation 5b Cover plate, St, zinc-plated, 1.0 mm, without perforation 6 1 ssembly kit ORDER INFORMTION Rear panel Height Width Cover plate without perforation Cover plate with perforation, for guide rails 5b 5a 5a/5b a 04808055 04808054 167 mm deep 7 mm deep 167 mm deep 7 mm deep U HP Part no. Part no. Part no. Part no. 8 481-408 481-458 481-08 481-58 10 481-410 481-460 481-10 481-60 1 481-41 481-46 481-1 481-6 14 481-414 481-464 481-14 481-64 1 481-41 481-471 481-1 481-71 8 481-48 481-478 481-8 481-78 1 a/b 4 0480805 4 481-44 481-49 481-4 481-9 8 481-08 481-58 10 481-10 481-60 1 481-1 481-6 b 14 481-14 481-64 c 1 481-1 481-71 8 481-8 481-78 04808051 0480805 4 481-4 481-9 Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.74 7.70 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO FRME TYPE PLUG-IN UNITS PRO, 6 U KITS, FRONT PNEL UNSHIELDED Illustration shows 1 HP width, side panel depth 167 mm 04811010 Extruded side panels with groove to rigth and left, to insert a PCB (board position in accordance with standard in left side panel only) board depths: 160 mm and 0 mm cover plate versions with perforation, for guide rails (5a, airflow approx. 60 %); please order guide rails separately Without perforation (5b) rear panel versions With cut-out for one connector (a; in accordance with EN 6060-, DIN 4161) With cut-out for multiple connectors (b; in accordance with EN 6060-, DIN 4161) 6 U has cut-outs for connectors at top and bottom DELIVERY COMPRISES (Kit) Item Qty Description 1 1 Front panel, l,.5 mm, anodised, cut edges plain 1 Handle, grey, PPE, UL 94 V-1 a 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for one connector, incl. PCB fixing (slot 1) b 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for multiple connectors, incl. PCB fixing (slot 1 and slot ), incl. guide rails rear panel fastener c 4 Side panel, l extrusion, colourless passivated, with groove for one PCB 5a Cover plate, St, zinc-plated, 1.0 mm, with perforation 5b Cover plate, St, zinc-plated, 1.0 mm, without perforation 6 1 ssembly kit ORDER INFORMTION Rear panel Height Width Cover plate without perforation Cover plate with perforation, for guide rails 5a/5b 1 04808055 04808054 167 mm deep 7 mm deep 167 mm deep 7 mm deep U HP Part no. Part no. Part no. Part no. 6 8 481-908 481-958 481-708 481-758 a 6 10 481-910 481-960 481-710 481-760 6 1 481-91 481-96 481-71 481-76 6 14 481-914 481-964 481-714 481-764 6 1 481-91 481-971 481-71 481-771 6 8 481-98 481-978 481-78 481-778 04808117 6 4 481-94 481-99 481-74 481-79 6 8 481-808 481-858 a/b b 6 10 481-810 481-860 4 6 1 481-81 481-86 6 14 481-814 481-864 6 1 481-81 481-871 c 6 8 481-88 481-878 04808057 04808059 6 4 481-84 481-89 5b 5a Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.74 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.71

Frame type plug-in units PRO FRME TYPE PLUG-IN UNIT PRO KITS, SIDE PNEL WITH COOLING FINS, FRONT PNEL SHIELDED Frame type plug-in units PROMain CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days Right side panel with cooling fins to improve heat dissipation; left side panel extrusion with groove to insert a PCB (board position in accordance with standard in left side panel only) board depths: 160 mm and 0 mm Cover plate without perforation With cut-out for one connector in accordance with EN 6060-, DIN 4161 With 10 W installed heat dissipation loss the internal temperature falls by approx. 5 C Illustration shows 1 HP width, side panel depth 167 mm ORDER INFORMTION 0481018 DELIVERY COMPRISES (Kit) Item Qty Description 1 1 Front panel, U profile anodised, rear conductive, alignment pin pressed-in 1 Handle, grey, PPE, UL 94 V-1 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for one connector, incl. PCB fixing (slot) 4a Side panel, left, l extrusion, clear passivated, with groove for one PCB 4b Side panel, right, l extrusion, clear passivated, with cooling fins 5 Cover plate, St, zinc-plated, 1.0 mm 6 1 EMC sealing (textile) 7 1 ssembly kit Height Width Depth = 167 mm Depth = 7 mm U HP Part no. Part no. 5 14 481-164 4a 1 4b 6 1 481-171 0481058 5 4a 1 6 14 481-664 481-614 4b 6 1 481-671 481-61 6 0481060 NOTE Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.74 7.7 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO FRME TYPE PLUG-IN UNITS PRO KITS, SIDE PNEL WITH COOLING FINS, FRONT PNEL UNSHIELDED Frame type plug-in units PROMain CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days Right side panel with cooling fins to improve heat dissipation; left side panel extrusion with groove for insertion of a PCB (board position in accordance with standard in left side panel only) board depths: 160 mm and 0 mm Cover plate without perforation With cut-out for one connector in accordance with EN 6060-, DIN 4161 With 10 W installed heat dissipation loss the internal temperature falls by approx. 5 C DELIVERY COMPRISES (Kit) Item Qty Description 1 1 Front panel, l,.5 mm, anodised, cut edges plain 1 Handle, grey, PPE, UL 94 V--1 1 Rear panel, St, zinc-plated, 1.5 mm, with cut-out for one connector, incl. PCB fixing (slot 1) 4a Side panel, left, l extrusion, clear passivated, with groove for one PCB 4b Side panel, right, l extrusion, clear passivated, with cooling fins 5 Cover plate, St, zinc-plated, 1.0 mm 6 1 ssembly kit Illustration shows 1 HP width, side panel depth 167 mm 0481008 ORDER INFORMTION Height Width Depth = 167 mm Depth = 7 mm U HP Part no. Part no. 5 1 481-16 4a 1 4b 14 481-164 1 481-171 0481059 5 6 1 481-66 481-61 4a 1 6 14 481-664 481-614 4b 6 1 481-671 481-61 0481061 NOTE Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.74 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.7

Frame type plug-in units PRO ServicePLUS INDIVIDUL COMPONENTS FRONT PNELS, FRONT HNDLES Frame type plug-in units PRO ServicePLUS Front panel Shieldable front panel, U profile Trapeziform handle, grey (without extraction function) unshielded Front panel Textile EMC gasket Grey Black Supplied quantity for assembly of 5frame type plug-in units 0480814 04808060 04808061 0480806 0480806 l,.5 mm, front anodised, rear anodised, cut edges blank l extrusion, alignment pin pressed-in, front anodised, rear conductive always fixed laterally on the front panel, in the groove of the profile, textile gasket, core: foam, sleeve: textile cladding with CuNi coating, UL 94 V-0, temperature range -40... 70 C handle: PPE, UL 94 V-1; identification plate: l, 1.5 mm, anodised, cut edges plain; please order clip separately (included in mounting kit for five plug-in units or individual parts) 7.77 1 piece (SPQ 5) 1) 1 piece (SPQ 5) 1) PU 10 pieces PU 100 pieces 1piece (SPQ 5) 1) 1 piece (SPQ 5) 1) Width U Height HP PCB depth 160 mm 8 481-108 481-108 0808-06 0808-08 10 481-110 481-110 0808-004 0808-085 1 481-11 481-11 0808-064 0808-086 14 481-114 481-114 1101-85 1101-854 0808-065 0808-087 1 481-11 481-11 0808-066 0808-088 8 481-18 481-18 0808-067 0808-089 4 481-14 481-14 0808-068 0808-091 PCB depth 0 mm 8 481-108 481-108 0808-06 0808-08 10 481-110 481-110 0808-004 0808-085 1 481-11 481-11 0808-064 0808-086 14 481-114 481-114 1101-85 1101-854 0808-065 0808-087 1 481-11 481-11 0808-066 0808-088 8 481-18 481-18 0808-067 0808-089 4 481-14 481-14 0808-068 0808-091 Width 6 U Height HP PCB depth 160 mm 8 481-608 481-608 0808-06 0808-08 10 481-610 481-610 0808-004 0808-085 1 481-61 481-61 0808-064 0808-086 14 481-614 481-614 1101-855 1101-856 0808-065 0808-087 1 481-61 481-61 0808-066 0808-088 8 481-68 481-68 0808-067 0808-089 4 481-64 481-64 0808-068 0808-091 PCB depth 0 mm 8 481-608 481-608 0808-06 0808-08 10 481-610 481-610 0808-004 0808-085 1 481-61 481-61 0808-064 0808-086 14 481-614 481-614 1101-855 1101-856 0808-065 0808-087 1 481-61 481-61 0808-066 0808-088 8 481-68 481-68 0808-067 0808-089 4 481-64 481-64 0808-068 0808-091 Dimensions see page 7.81 7.81 7.8 7.8 1) SPQ (standard pack quantity): Part number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or a multiple Part no. includes one packing unit (PU); delivery is exclusively made in PU 7.74 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO ServicePLUS INDIVIDUL COMPONENTS SIDE PNELS, COVER PLTES, GUIDE RILS Extruded side panel Extruded side panel with cooling fins Side panel, corner profile and side plate Cover plate Left Right Left Right Corner profile Side plate Without perforation With perforation Supplied quantity for assembly of 5frame type plug-in units 0480814 04808065 04811050 04808066 04808067 04808068 04808070 l extrusion, colourless passivated, with groove for one PCB; U symmetrical; 6 U asymmetrical, right and left side panel different) Side panels with and without cooling fins can be combined l extrusion, colourless passivated, with groove for one PCB; U symmetrical; 6 U asymmetrical Side panels with and without cooling fins can be combined l extrusion, colourless passivated, with groove for one PCB, please order side plate separately St, 1 mm, zinc-plated, is inserted into side panel rear angle St, 1.0 mm, zinc-plated; PCB only possible in slot 1 St, 1. mm, l, airflow rate in perforated area approx. 65 %; PCB only possible in slot 1 1 piece (SPQ 10) 1) 1piece (SPQ10) 1) 1 piece (SPQ 10) 1) 1 piece (SPQ 10) 1) 1piece (SPQ10) 1) 1 piece (SPQ 5) 1) 1piece (SPQ10) 1) 1piece (SPQ10) 1) Width U Height HP PCB depth 160 mm 8 481-408 481-958 10 481-410 481-960 1 481-41 481-96 14 481-100 481-100 481-00 481-00 481-10 481-10 481-414 481-964 1 1piece (SPQ 10) 1) 1piece (SPQ 10) 1) 481-41 481-971 8 481-48 481-978 4 481-44 481-99 PCB depth 0 mm 8 481-408 481-958 10 481-410 481-960 1 481-41 481-96 14 481-100 481-100 481-00 481-00 481-10 481-10 481-414 481-964 1 1piece 1piece 481-41 481-971 8 (SPQ 10) 1) (SPQ 10) 1) 481-48 481-978 4 481-44 481-99 Width 6 U Height HP PCB depth 160 mm 8 481-408 481-958 10 481-410 481-960 1 481-41 481-96 14 481-701 481-10 481-60 481-414 481-964 481-600 481-601 1 1piece (SPQ5) 1) 1piece (SPQ5) 1) 481-41 481-971 8 481-48 481-978 4 481-44 481-99 PCB depth 0 mm 8 481-408 481-958 10 481-410 481-960 1 481-41 481-96 14 481-701 481-10 481-60 481-414 481-964 481-600 481-601 1 1piece (SPQ5) 1) 1piece (SPQ5) 1) 481-41 481-971 8 481-48 481-978 4 481-44 481-99 Dimensions see page 7.79 7.79 7.79 7.79 7.80 7.80 7.84 7.84 1) SPQ (standard pack quantity): Part number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or a multiple Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.75

Frame type plug-in units PRO ServicePLUS INDIVIDUL COMPONENTS RER PNELS, SSEMBLY MTERIL Supplied quantity for assembly of 5frame type plug-in units With perforation for guide rails Rear panel Rear panel fastener ssembly kit Cover plate Guide rail Without cut-out Cut-out for one connector Cut-out for multiple connectors for connection of rear panel with cover plate 0480814 04808069 04808074 0480807 04808071 0480807 048081 St, 1.0 mm, zinc-plated; air flow rate in perforated area approx. 60 %; please order snap-in guide rails separately PBT, UL 94 V-0, red, groove width mm, PCB fixing required from slot, see page 7.78 St, 1.5 mm, zinc-plated St, 1.5 mm, zinc-plated St, 1.5 mm, zinc-plated, for EN 6060 (DIN 4161) connectors, types: B, C, D, F, H, Q, R, S 10 rear panel fasteners, Zn die-cast; 10 fixing screws; not suitable for cover plate with perforation 1 piece (SPQ 10) 1) PU 10 pieces 1 piece (SPQ 5) 1) 1 piece (SPQ 5) 1) 1 piece (SPQ 5) 1) PU 1 kit PU 1 kit Width U Height HP PCB depth 160 mm 8 481-908 481-08 481-08 481-08 10 481-910 481-10 481-10 481-10 1 481-91 481-1 481-1 481-1 14 481-914 481-101 481-14 481-14 481-14 1 481-91 481-1 481-1 481-1 8 481-98 481-8 481-8 481-8 4 481-94 481-4 481-4 481-4 PCB depth 0 mm 8 481-908 481-08 481-08 481-08 10 481-910 481-10 481-10 481-10 1 481-91 481-1 481-1 481-1 14 481-914 481-101 481-14 481-14 481-14 1 481-91 481-1 481-1 481-1 8 481-98 481-8 481-8 481-8 4 481-94 481-4 481-4 481-4 for mounting five U or 6 U frame type plug-in units from ServicePLUS components: front panel, rear panel, side panel, cover plate and handle, description see page 7.77 481-401 481-100 481-401 481-100 Width 6 U Height HP PCB depth 160 mm 8 481-908 481-708 481-708 481-808 10 481-910 481-710 481-710 481-810 1 481-91 481-71 481-71 481-81 14 481-914 481-101 481-714 481-714 481-814 1 481-91 481-71 481-71 481-81 8 481-98 481-78 481-78 481-88 4 481-94 481-74 481-74 481-84 PCB depth 0 mm 8 481-908 481-708 481-708 481-808 10 481-910 481-710 481-710 481-810 1 481-91 481-71 481-71 481-81 14 481-914 481-101 481-714 481-714 481-814 1 481-91 481-71 481-71 481-81 8 481-98 481-78 481-78 481-88 4 481-94 481-74 481-74 481-84 Dimensions see 7.84 7.8 7.8 7.8 7.8 page 1) SPQ (standard pack quantity): Part number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or a multiple Part no. includes one packing unit (PU); delivery is exclusively made in PU 481-401 481-100 481-401 481-100 7.76 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO ServicePLUS INDIVIDUL COMPONENTS FIXING MTERIL (100 PIECES) 6 7 4 a/b 5 1 4 Required quantity Fixing parts Item per plug-in unit Fixing parts for mounting the module in subrack or case Torx panhead screw, M.5 x 10, St, zinc-plated, self-forming thread 1 aza45940 04808085 Description Qty/PU Part no. ssembly of handle on front panel 100 4560-179 Pozidrive/slotted collar screw M.5 11, St, nickel-plated a 4 / 6* Mounting of front panel on horizontal rail with threaded insert pushed in to front aza46586 06107050 100 1100-748 Pozidrive/slotted collar screw M.5 1., St, nickel-plated Plastic sleeves for form hole 5.9 x., P, UL 94 V-, grey Fixing parts for mounting the module Torx raised countersunk panhead screw x 0, St, nickel-plated Fixing clip for trapeziform plastic handle PPE UL 94 V 0, black b 4 / 6* Front panel is fitted to horizontal rail with threaded insert pushed in to rear in the standard position aza46586 06107051 4 / 6* aza459 100 1101-101 Is needed to fix collar screws 100 1100-464 4 8 ssembly of front panel and rear panel on extruded side panel/rear extrusion of side panel 0670805 5 04608090 100 481-501 lignment aid for handle on front panel 100 1101-9 Rear panel fastener Zn die-cast 6 To stabilise rear panel with wide frame-type plug-in units 0480818 100 481-40 Torx panhead screw M.5 10, St, nickel-plated 7 aza45940 To fix rear panel fastener or board fixing 100 4560-148 Board support (slot 1) Zn die-cast 0480816 Board support (slot 1) see page 7.78 50 pairs 481-0 Board support (from slot ) Zn die-cast 0480817 Board support (from slot ) see page 7.78 50 pairs 481-0 Torx panhead screw M.5 6, St, nickel-plated aza45940 Is needed for board fixing without connector see page 7.78 * on 4 HP EMC shielded frame type plug-in units 100 4560-178 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days Further collar screws and sleeves see page 7.107 nvent.com/schroff 7.77

Frame type plug-in units PRO ServicePLUS INDIVIDUL COMPONENTS BORD FIXING Board fixing slot 1 Board fixing from slot With connector from slot Without connector from slot Slot 1 Zn die-cast, Torx panhead screw M.5 x 10; PCB is pushed into the guiding groove of the left side panel/ side panel rear angle, is fixed with rear panel Slot 1 Slot Slot 1 Slot Slot Slot 04808119 04808110 04808118 04808109 0480819 bga4785 kaa46417 Zn die-cast, Torx panhead screw M.5 x 10; PCB is pushed into guide rail, is fixed with rear panel Height PU 5 pair PU 5 pair U 481-01 481-01 6 U 481-01 481-01 ssembly kits With connector from slot Without connector from slot Torx panhead screw, M.5 x 6, St, nickelplated, PU 100 pieces; is needed for board fixing without connector 4560-178 4560-178 aza45940 Connector mounting on PCB, for 6 U frame type plug-in units (centre) Torx panhead screw M.5 x 10, nut M.5; PU 10 pieces (screw + nut) 481-600 481-600 0480810 7.78 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO SIDE PNEL WITHOUT COOLING FINS U 6 U 1, 10,6, D 1,,0 10,6 D 6,7 16,5 16,5 111,15 99,55 70 6,4 96,45 100,45 10,75 44,,6 0,5 194,9 0,1 4,1 7,1 7,4,0 9,5 Depth = 167/7 mm,0 9, 04808101 0480810 Frame type plug-in units PROMain CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days SIDE PNEL WITH COOLING FINS U 6 U 1, 10,6 D 1, 6,7 10,6 D 44,,6 0,5 111,15 4,1 70 100,45 10,75 99,55 7,1 7,4,4 10,6 Depth = 167/7 mm,4 10,6 04811051 0481105 Frame type plug-in units PROMain CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.79

Frame type plug-in units PRO SIDE PNEL RER NGLE 10,6 D 6, 16,9 14,8 16,5 18,95 0,95,0 9, 1, Depth = 167/7 mm 0480810 Frame type plug-in units PROMain CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days SIDE PLTE 6 D 7 D 7,4 196,15 6,8 04808100 04808099 U for side panel rear angle 6 U for side panel rear angle Frame type plug-in units PROMain CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days 7.80 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO FRONT PNELS Unshielded Text Shieldable, for EMC textile gasket U 6 U U 6 U Ø 5,9 x, b 7,45 Ø 5,9 x, b Ø 7, 5,9 xx,, b b 7,45 7, 5,0 c 5,0 c 5,0 c 5,0 c Ø 5,9 x, 70 9, 14,7 5,0 Ø,9,5 Ø,5 b c 10,16 d Ø, - 1,4 18,4 7,45 Ø,9 Ø 5,8 90 0,5 Ø 5,9 x, Ø,9 9, 14,7 5,0,5 Ø,5 10,16 d Ø, - b c 55,75 61,75 Ø,9 Ø 5,8 90 7 70 Ø 5,9 x, 9, 14,7 70 Ø,9 5,0 9, 14,7 Ø,9 6, 6, 10,16 10,16 Ø,5 Ø,5 b 5,08 Ø, c d - 5 5,08 Ø, Ø,5 5,5 d - Ø,5 1,4 18,4,5 7,45 Ø,9 Ø 5,8 90 1,4 0,5 0,5 Ø,9 9, 14,7 6, 10,16 d Ø,5 Ø,9 5,08 Ø, Ø,5-5,08 5,5 Ø 55,75 61,75 Ø 5 Ø,9 Ø 5,8 90 55,75 04808086 04808087 04808088 04808089 Text Dimensions table b c d Width mm mm mm mm 8 HP 40.0 5.40 0.4 5.08 10 HP 50.46 5.56 40.40 15.4 1 HP 60.6 45.7 50.56 5.40 14 HP 70.78 55.88 60.7 5.56 1 HP 106.4 91.44 96.8 71.1 8 HP 141.90 17.00 11.84 106.68 4 HP 1.0 198.1 0.96 177.80 Dimensions Front handle Text Dimensions table Width Width HP mm 8 HP 9. 10 HP 49.4 1 HP 59.6 14 HP 69.7 1 HP 105. 8 HP 140.8 4-8e 4 HP 1.0 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.81

Frame type plug-in units PRO RER PNEL U Without cut-out For one connector Text For multiple connectors Ø 4,8 109,1 101 70 Ø,8 B n x 5,08 1,5 Ø 4,8 109,1 101 70 15,7 5,0 B n x 5,08 91 Ø,8 1,5 Ø 4,8 109,1 101 0480809 04808091 04808090 70 Ø,8 91 B n x 5,08 C 1,5 5,0 Dimensions table B C n HP mm mm mm 8 HP 7.04 0.4 0.18 1 10 HP 47.0 40.40 0.4 1 HP 57.6 50.56 40.50 5 14 HP 67.5 60.7 50.66 7 1 HP 10.08 96.8 86. 14 8 HP 18.64 11.84 11.78 1 4 HP 09.76 0.96 19.90 5 RER PNEL 6 U Without cut-out For one connector Text For multiple connectors Ø 4,8 B n x 5,08 1,5 Ø 4,8 B n x 5,08 1,5 Ø 4,8 B n x 5,08 1,5 4,45 4,5 0,5 7,5 4,45 4,5 0,5 5,0 15,7 91 91 1,5 7,5 4,45 4,5 0,5 101,5 101 91 91 5,0 1,5 7,5 Dimensions table B C n HP mm mm mm 8 HP 7.04 0.4 0.18 1 10 HP 47.0 40.40 0.4 1 HP 57.6 50.56 40.50 5 14 HP 67.5 60.7 50.66 7 1 HP 10.08 96.8 86. 14 8 HP 18.64 11.84 11.78 1 4 HP 09.76 0.96 19.90 5 Ø, x,8 Ø, x,8 9,05 Ø, x,8 C 9,05 04808095 04808094 0480809 7.8 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO GUIDE RIL Text 6,9 (66,9) 141,54 160 (0) 04808096 04808088 COVER PLTES without perforation Text with perforation for guide rail mounting D D D D = 167/7 mm 04808104 04808106 04808105 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.8

Frame type plug-in units PRO MOUNTING INSTRUCTIONS FOR GUIDE RILS IN FRME TYPE PLUG-IN UNITS Slot 1 + slot S1 L Slot L S S min. TE/ HP/ F min. TE/ HP/ F min. TE/ HP/ F min. 1 TE/ HP/ F R 04809050 R Front view 1) S1 4,07 TE TE x 5,08 4),5),6) min. TE TE = HP = F 1) Division line ) Guide rail rotated by 180 from standard position ) The first PCB is held in the extruded side panel, corresponds to standard position (slot 1) 4) ll additional PCBs are fitted into guide rails (from slot ) 5) Min. 1 HP where slot 1 is not used (slot ) 6) Dependent on construction of connector used (not every connector allows a HP fitting) ) S 4),6) min. TE 04809051 04808107 b 4) min.8,7 ) Mounting pitch for guide rails: 1 HP Min. distance between guide rails: HP Width of frame type plug-in unit b Max. number of PCBs mountable HP mm slot 1 from slot 8 1 1 5.08 1 5) 10 1 14 1 8 4 10.16 1 1 6) 15.4 5)6) 0. 1 6) 5.40 5) 6) 0.48 1 6) 5.56 4 5) 6) 71.1 1 7 6) 66.04 7 5) 6) 101.60 1 10 6) 106.68 11 5) 6) 17.7 1 17 6) 177.80 18 5) 6) Front view MOUNTING SPCE FRME-TYPE PLUG-IN UNIT U/6 U TBLE 95,9 6,9 16,5, 9,5,0 10, 8,0 19,9 16,5, 9,,0 7, Height Width U HP mm 8 0.70 10 40.86 1 51.0 14 61.18 1 96.74 8 1.0 4 0.4 6 8 0.10 6 10 40.6 6 1 50.4 6 14 60.58 6 1 96.14 6 8 11,70 6 4 0.8 10,8 10,5 = TE x 5,08-9,94 = TE x 5,08-10,54 04808097 04808098 7.84 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO with hood FRME TYPE PLUG-IN UNITS PRO WITH HOOD, /6 U, FRONT PNEL SHIELDED (TEXTILE GSKET) Frame type plug-in units PRO with hood Protects a PCB against mechanical damage and deflects electrostatic discharge; for euroboard formats Suitable in all subracks and these cases: ratiopacpro/-air, propacpro and compacpro Useable connectors in accordance with EN 6060- (DIN 4161) depths, for 160 mm and 0 mm boards DELIVERY COMPRISES (kit) Item Qty Description 1 1 Front panel, U profile,.5 mm, front anodised, rear conductive, alignment pin pressed-in 1 Handle, grey, PPE, UL 94 V-1 1 Side panel, l extrusion, colourless passivated, with groove for one PCB 4 1 Hood, l, 1 mm, with perforation, rear panel integrated 5 1 EMC textile gasket 6 1 ssembly kit (incl. PCB fixing for slot 1) Illustration shows 1 HP width, side panel depth 167 mm 04808007 ORDER INFORMTION 5 HP 6... 14 HP Height Width Depth = 167 mm Depth = 7 mm U HP Part no. Part no. 5 481-005 481-055 1 1 6 481-006 481-056 7 481-007 481-057 4 5 4 04808075 0480811 5 10 481-010 481-060 1 481-01 481-06 14 481-014 481-064 6 5 481-505 481-555 1 1 6 6 481-506 481-556 6 7 481-507 481-557 6 10 481-510 481-560 4 4 6 1 481-51 481-56 5 5 6 14 481-514 481-564 04808076 04808114 Dimension drawings see from page 7.88 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.85

Frame type plug-in units PRO with hood PLUG-IN UNITS PRO WITH HOOD, /6 U, FRONT PNEL UNSHIELDED Protects a PCB against mechanical damage and deflects electrostatic discharge; for euroboard formats Suitable in all subracks and these cases: ratiopacpro/-air, propacpro and compacpro Useable connectors in accordance with EN 6060- (DIN 4161) depths, for 160 mm or 0 mm board DELIVERY COMPRISES (kit) Item Qty Description 1 1 Front panel, l,.5 mm, anodised, cut edges plain 1 Handle, grey, PPE, UL 94 V-1 1 Side panel, l extrusion, colourless passivated, with groove for one PCB 4 1 Hood, l, 1 mm, with perforation, rear panel integrated 5 1 ssembly kit (incl. PCB fixing for slot 1) Illustration shows 1 HP width, side panel depth 167 mm 0480800 ORDER INFORMTION 5 HP 6... 14 HP Height Width Depth = 167 mm Depth = 7 mm U HP Part no. Part no. 5 481-005 481-055 6 481-006 481-056 1 1 4 4 04808077 04808115 7 481-007 481-057 10 481-010 481-060 1 481-01 481-06 14 481-014 481-064 6 5 481-505 481-555 1 6 6 481-506 481-556 6 7 481-507 481-557 6 10 481-510 481-560 4 6 1 481-51 481-56 6 14 481-514 481-564 04808078 04808116 Dimension drawings see from page 7.88 7.86 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Frame type plug-in units PRO with hood CROSS-SECTION FRME-TYPE PLUG-IN UNITS PRO WITH HOOD U/6 U 96,4 6,4 U 6 U 104,85 0,1 194,9 Text Dimensions table Height Width U HP mm 5 17.5 6.60 7 7.68 10 4.9 1 5.08 14 6.4 6 5 17. 6 6.0 6 7 7.8 6 10 4.6 6 1 57.78 6 14 6.94 16,5 16,5 8,,, 10,8 10,5 04808080 0480808 FRONT HNDLE Main CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days a4-8e TBLE Width Width HP mm 5 4.0 6 9.0 7 4.1 10 49.4 1 59.6 14 69.7 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.87

Frame type plug-in units PRO with hood /6 U FRME-TYPE PLUG-IN UNITS PRO WITH HOOD U Front panel shieldable Front panel unshielded Ø 5,9 x, b Ø 5,9 x, b D,5,4 5,0 c 5,0 c 70 5,08 1,4 18,4 70 1,4 18,4 106 Ø,9 Ø, Ø,5 9, 14,7 91 70 Ø,9 Ø,5 Ø, 9, 14,7 e d e d 1,9 15,7 8,4 6, 7,45 f Ø,5-5,5 Ø,9 Ø 5,8 90,5 7,45 f - Ø,9 Ø 5,8 90 0480805 04808111 6 U Front panel shieldable Front panel unshielded Ø 5,9 x, b Ø 5,9 x, b D,5,4 5,0 c 5,0 c 9, 14,7 0,5 55,75 61,75 55,75 5,08 91 Ø,9 Ø, Ø,5 9, 14,7 0,5 61,75 9,5 4,5 0,5 91 Ø,9 Ø,5 Ø, e d e d 1,9 15,7 8,4 6, 7,45 f Ø,5-5,5 Ø,9 Ø 5,8 90,5 7,45 f - Ø,9 Ø 5,8 90 0480905 0480811 Front panel 5 HP 6 + 7 HP Frame type plug-in units PRO with hoodmain CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days Ø, Ø,5 Ø, Ø,5 Dimensions table 5 5.06-15.00-10.16 1.5 6 0.14-0.08-10.16 7.45 7 5. - 5.16-10.16 7.45 10 50.46 5.56 40.40 15.4 10.16 7.45 1 60.6 45.7 50.56 5.40 10.16 7.45 167 mm/ 7 mm f e 14 70.78 55.88 60.7 5.56 10.16 7.45 7,45 e 7,45 f 04809067 04809066 7.88 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

HF frame type plug-in units HF FRME TYPE PLUG-IN UNITS, U KITS, FRONT PNEL SHIELDED HF frame type plug-in units With high shielding from high-frequency radiation To accept boards in HP grid increments Solid body on all sides, with cooling fins DELIVERY COMPRISES (kit) Item Qty Description 1 1 Body tube, l extrusion, black anodised, cut edges plain 1 Front panel, l,.5 mm, with lateral grooves for EMC gasket (stainless steel), alignment pin pressed-in, front anodised, rear iridescent green chromated 1 Plastic handle, trapeziform, PPE, grey, identification plate, l, anodised, cut edges plain 4 1 Rear panel, l, 1.5 mm, etched without cut-outs 5 EMC gasket (steel, stainless) 6 1 ssembly kit 0489005 TECHNICL DT ORDER INFORMTION HF plug-in unit Thermal resistance K/W HP Depth = 167 mm Depth = 7 mm 7 1.68 1.51 10 1.6 1.46 1 1.56 1.40 14 1.50 1.5 1 1.06 0.95 8 0.94 0.85 Height Width Depth = 167 mm Depth = 7 mm U HP Part no. Part no. 4 7 0809-59 0809-56 1 10 0809-50 0809-57 1 0809-51 0809-58 14 0809-5 0809-59 1 0809-5 0809-540 5 8 0809-54 0809-541 0480050 NOTE Dimension drawings see from page 7.94 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.89

HF frame type plug-in units ServicePLUS INDIVIDUL COMPONENTS HF BODY TUBE, FRONT PNELS WITH HNDLE, RER PNELS HF frame type plug-in units ServicePLUS ORDER INFORMTION HF body tube Shieldable front panel, with handle Shieldable front panel, with handle for EMC gasket (stainless steel) EMC gasket (stainless steel) Rear panel ssembly tool without cut-out with cut-out l extrusion, black anodised, cut edges plain K458 K4581 04807074 bga45760 aza4597 04807075 K4584 l,.5 mm, front anodised, rear iridescent green chromated; static handle, grey, PPE, UL 94 V-1 l,.5 mm, front anodised, rear iridescent green chromated, with lateral grooves for stainless steel EMC gasket (please order separately), alignment pin pressed-in, trapeziform handle, grey, PPE, UL 94 V-1 inserted laterally into the grooves of the front panel to mount the EMC gasket (stainless steel) l, 1.5 mm, etched l,.5 mm, etched, cut-out for connector types EN 6060 (DIN 4161); 7 HP: B, C, D, R; 10-8 HP: B, C, D, R, F, H, MF, MH Height Width 1piece (SPQ5) 1) 1piece (SPQ5) 1) 1piece (SPQ5) 1) PU 100 pieces 1 piece 1piece (SPQ5) 1) 1piece (SPQ5) 1) U HP PCB depth 160 mm 7 0809-667 088-001 088-09 0809-65 0809-641 10 0809-677 088-00 088-094 0809-66 0809-64 1 0809-675 088-00 088-095 0809-67 0809-64 1101-705 4560-70 14 0809-67 088-004 088-096 0809-68 0809-644 1 0809-671 088-005 088-097 0809-69 0809-645 8 0809-669 088-006 088-098 0809-640 0809-646 PCB depth 0 mm 7 0809-668 088-001 088-09 0809-65 0809-641 10 0809-678 088-00 088-094 0809-66 0809-64 1 0809-676 088-00 088-095 0809-67 0809-64 1101-705 4560-70 14 0809-674 088-004 088-096 0809-68 0809-644 1 0809-67 088-005 088-097 0809-69 0809-645 8 0809-670 088-006 088-098 0809-640 0809-646 Depth 1000 mm (without thread for front panel and rear panel) 7 0809-679 10 0809-698 1 0809-699 14 0809-680 1 0809-681 8 0809-68 Dimensions see page 7.9 7.94 7.9 1) SPQ (standard pack quantity): Part number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or a multiple Part no. includes one packing unit (PU); delivery is exclusively made in PU 7.90 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

HF frame type plug-in units INDIVIDUL COMPONENTS SLIDE NUTS, FIXING FOR PCBS, MOUNTING KIT HF frame type plug-in units ORDER INFORMTION Slide nut Fixing for PCBs Fixing material for one HF M.5 M Individual components Complete assembly kit frame type plug-in unit top bottom 04807076 K4584 width across flats (WF) 7, for insertion into HF body tube, top and bottom, provides lateral fixing (on right) bracket (stainless steel), 1.5 mm; please order retention screws separately bracket top and bottom (stainless steel), 1.5 mm; incl. two cheesehead screws M.5 x 4 for complete assembly of a U HF frame type plug-in unit: front panel, rear panel and handle, description see page 7.9 Height Width PU 100 pieces PU 100 pieces 1 piece (SPQ 10) 1) 1 piece (SPQ 10) 1) PU 1 kit PU 1 kit U HP 7 10 1 14 1 8 1100-11 1100-89 0809-701 0809-700 1101-97 1100-105 ccessories Cheesehead screw M.5 4, St, nickel-plated, PU 100 pieces 1100-41 1100-41 1) SPQ (standard pack quantity): Part number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or a multiple Part no. includes one packing unit (PU); delivery is exclusively made in PU Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.91

HF frame type plug-in units INDIVIDUL COMPONENTS FIXING MTERIL (100 PIECES) HF frame type plug-in units ORDER INFORMTION Required quantity Description Item per plug-in unit Fixing parts for mounting the module in subrack or case 0480054 Description Qty/PU Part no. Plastic sleeve for form hole 5.9 x., P, UL 94 V-, grey 4 at 7 HP aza459 4 at > 7 HP Front panel is fitted to horizontal rail with threaded insert pushed in to front 100 1100-464 Pozidrive/slotted collar screw M.5 11, St, nickel-plated 5 at 7 HP 4 at > 7 HP aza46586 06107050 Front panel is fitted to horizontal rail with threaded insert pushed in to front 100 1100-748 Pozidrive/slotted collar screw M.5 1., St, nickel-plated Fixing parts for mounting the module 5 at 7 HP Front panel is fitted to horizontal rail with threaded insert pushed in to rear in the 4 at > 7 HP standard position aza46586 06107051 100 1101-101 Square nut DIN 56, M.5,St, nickel-plated 6 1 at 7 HP 06705050 To mount handle on front panel 100 1100-59 Pozidrive countersunk screw M.5 1, St, nickel-plated 7 1 at 7 HP To mount handle on front panel 100 1100-507 aza45177 Slotted cheesehead screw M.5 16, St, nickel-plated 8 aza45467 1 at 7 HP at > 7 HP To mount handle and front panel on HF body tube 100 1100-150 Raised Pozidrive countersunk panhead screw M.5 8, St, nickel-plated 9 0670056 To mount front panel on HF body tube 100 1100-49 Pozidrive countersunk screw M.5 6, St, nickel-plated 10 4 To mount rear panel on HF body tube 100 1100-515 0670056 NOTE Further collar screws and sleeves see page 7.107 7.9 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

Ø 4, HF frame type plug-in units HF BODY TUBE Text 7 HP 1 HP 10, 14, 1, 8 HP B B B 7, 7, 7,,6,6,6 5 9,96 10,16,1 9,96 15,4 9,96 10,16 0, n x 5,08 0,48 57,5 4-47c 04807079 4-47a Dimensions table Dimension 7 HP 10 HP 1 HP 14 HP 1 HP 8 HP mm n 5.08 7 5.08 14 5.08 1 5.08 47.4 67.66 10. 18.78 B 6.4 41.58 51.74 61.90 97.46 1.0 Text RER PNEL WITH/WITHOUT CUT-OUT FOR CONNECTOR 7 HP 10, 1, 14, 1, 8 HP 7 HP 10, 1, 14, 1, 8 HP Text 1,1 15,7 108,4 88, 9,5 108,4 40 Ø 1,8 88, 7,7 8,5 108,4 108,4 1 4 4 04807086 048005 04807087 0480708 Text Dimensions table Width mm 7HP.00 10 HP 47.4 1 HP 57.40 14 HP 67,40 1 HP 10.1 8 HP 16.68 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.9

HF frame type plug-in units FRONT PNELS Text Unshielded Shieldable, slotted for EMC stainless steel gasket 7 HP 10, 1, 14, 1, 8 HP 7 HP 10, 1, 14, 1, 8 HP. ø5.9. ø5.9. ø5.9. ø5.9 ø.5 10.7 1.8 ø.5 10.7 1.8 10.16 ø.5 7.45 5..5 14.7 18.4 99 1.4 10.16 14.7 18.4 99 1.4 10.16 ø.5 7.45 ø.5 B.5 X 5 ø.5.5 14.7 18.4 99 1.4 10.16 7.45 5.08 5. 5 ø.5 ø.5 B X.5 14.7 18.4 99 1.4 7.45 5.08 ø.5 ø.5 1 0.65 ø.5 ø.5 1 0.65 1.8 1.8 K407 04807084 04807085 048005 Text Dimensions table Width w mm mm 7 HP. 10 HP 50.46 5.56 1 HP 60.6 45.7 14 HP 70.78 55.88 1 HP 106.4 91.44 8 HP 141.90 17.00 FRONT HNDLE Text Dimensions table Width Width HP mm 10 HP 49.4 1 HP 59.6 14 HP 69.7 1 HP 105. 4-8e 8 HP 140.8 7.94 nvent.com/schroff SCHROFF PRODUCT CTLOG 05/018

HF frame type plug-in units DPTOR FOR HORIZONTL RIL MOUNTING Main CataloguePart number in bold face type: ready for despatch within working dayspart number in normal type: ready for despatch within 10 working days For fitting of e.g. subracks, wall mounted cases, frame type plug-in units or PSUs on a horizontal rail with lip daptor is bolted to the desired product and can then be clipped onto the lipped horizontal rail (DIN 4880) DELIVERY COMPRISES Item Qty Description 1 1 daptor, l extrusion, length 160 mm 1 1 Fixing material ORDER INFORMTION Description Part no. daptor for horizontal rail mounting 11000-00 048101 Example: horizontal rail adaptor with lip for 19" PSU 1195007 Part number in bold face type: ready for despatch within working days Part number in normal type: ready for despatch within 10 working days nvent.com/schroff 7.95

North merica Warwick, RI, US Tel +1.800.55.468 San Diego, C, US Tel +1.800.854.7086 Europe, Middle East & India Straubenhardt, Germany Tel +49 708 794 0 Betschdorf, France Tel + 88 90 64 90 Warsaw, Poland Tel +48 09 98 5 Hemel Hempstead, Great Britain Tel +44 144 4 04 71 Lainate, Italy Tel +9 0 9 714 1 Dubai, United rab Emirates Tel +971 4 7 81 700 Bangalore, India Tel +91 80 6715000 Istanbul, Turkey Tel +90 16 50 774 sia Pacific Shanghai, China Tel +86 1 41 694 Singapore Tel +65 6768 5800 Shin-Yokohama, Japan Tel +81 45 476 071 Our powerful portfolio of brands: CDDY ERICO HOFFMN RYCHEM SCHROFF TRCER nvent.com/schroff 018 nvent. ll nvent marks and logos are owned or licensed by nvent Services GmbH or its affiliates. ll other trademarks are the property of their respective owners. nvent reserves the right to change specifications without notice.