EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511 6704 305 www.forbo-siegling.com, siegling@forbo.com Ref. no. 888-2_1.2_S14
SERIES 14 l OVERVIEW Straight running belts l Pitch 12.7 (0.50 in) Belts for medium-duty food and non-food applications Side view scale 1:1 Available surface pattern and opening area 12.7 (0.5) S14-25 FLT Open (25 %), smooth surface Design characteristics Mini pitch belt with small transfer gap Robust design guarantees superior durability and high belt pull capacity Design for smooth run on 19 (0.75 in) nose bar Headless pin system making it easy to install and remove the belt for maintenance Closed, solid belt edge to prevent belt edge damages Basic data Pitch 12.7 (0.50 in) Belt width min. 76.2 (3.0 in) increments 12.7 (0.50 in) Hinge pins 3.4 (0.13 in) made of plastic Sprockets in different sizes with round or square sprocket bore Detail hinge pin Headless one-piece pin with unique retention system ensures trouble free installation and maintenance 165 Prolink Engineering Manual 11/17
SERIES 14 BELT TYPES Straight running belt Pitch 12.7 (0.50 in) S14-25 FLT 25 % Opening Flat top Open version (25 %) for excellent air circulation and drainage Smooth surface p h m Variant specific dimensions [ (in)] 2.7 (0.11) d pin hpin Winc Wmin 8.2 (0.32) Wmin Belt dimensions p d pin h m h pin h s W min W inc W tol Minimum flex radii1 Pitch Pin Ø Thickness [] Pin position [] Height [] min. [] Increment [] tolerance [%] r1 r2 r3 r4 r5 12.7 3.4 7.5 3.8 0.0 76.2 12.7 ±0. 12.7 25.4 38.1 12.7 0.5 0.13 0.3 0.15 0.0 3.0 0.5 ±0. 0.5 1.0 1.5 0.5 Available standard materials4 Nominal belt pull, Belt Pin Weight Temperature Certificates straight deviation Material Color Material Color [N/] [lb/ft] [kg/m 2 ] [lb/ft 2 ] [%] [ C] [ F] FDA2 EU3 POM BL PBT UC 24 1645 6.9 1.41 0.0-45/90-49/194 POM WT PBT UC 24 1645 6.9 1.41 0.0-45/90-49/194 PP BL PP WT 9 617 4.9 1.0 0.43 5/100 41/212 PP WT PP WT 9 617 4.9 1.0 0.43 5/100 41/212 PE BL PE WT 6.5 445 4.7 0.96-0.13-70/65-94/149 PE WT PE WT 6.5 445 4.7 0.96-0.13-70/65-94/149 BL (Blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 C; for temperature deviations please see Prolink manual chapter 4.4 Temperature influence. All imperial dimensions (es) are rounded off. 1 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on hold down shoe, r5 = back flex on roller 2 Complies with FDA 21 CFR 3 Complies with (EU) 10/11 and (EC) 1935/04 regulations regarding the raw materials used and the migration thresholds 4 More materials and colors on request 166 Prolink Engineering Manual 11/17
SERIES 14 SPROCKETS Straight running belt Pitch 12.7 (0.50 in) A S14 SPR Sprockets B B B-B D0 Wspr Main dimensions Sprocket size (Number of teeth) Wspr D0 Amax Amin Z12 Z15 Z19 Z24 Z28 Z36 49 1.93 21 0.82 61 2.40 27 1.05 26 1.03 77 3.04 35 1.37 34 1.35 97 3.83 45 1.77 44 1.75 113 4.47 53 2.08 53 2.07 146 5.74 69 2.72 69 2.71 Shaft bores ( = Round, = Square) 25 30 40 60 0.75 1 1.25 1.44 1.5 2.5 / / Material: PA, Color: LG LG (Light gray) All measurements and tolerances apply at 21 C; for temperature deviations please see Prolink manual chapter 4.4 Temperature influence. All imperial dimensions (es) are rounded off. 167 Prolink Engineering Manual 11/17
Legend ➀ Series ➃ Type ➅ Material ➆ Color* S1 S14 ➁ Open area/sprocket size Percentage open area Format: xx E.g. = % For sprockets: number of teeth Format: Z xx E.g. Z12 = 12 teeth ➂ Surface pattern BSL Base module for slider CTP Cone top FLT Flat top (smooth) FRT(X) Friction top (Design X) FRT-OG FRT without High Grip insert GRT Grid top LRB Lateral rib MOD Modified module shape NCL No cling NPY Inverted pyramid NSK Non skid NTP Nub top (round studs) RAT Radius top RTP Roller top RRB Raised rib SRS Slip-resistant surface A90 CM SML SMR SMU UM PMC PMU PMU lxx CLP IDL RI SG PIN FPL SLI SPR RTR TPL TPR CW CCW Angle 90 to conveying direction Center module Side module, left Side module, right Side module, universal/both sides Universal module Profile module center Profile module universal Profile module universal with indent xx = indent in Clip Idler High Grip insert Module with sideguard Coupling rod Finger plate Slider Sprocket Retaining ring Turning panel, left Turning panel, right Clockwise Counterclockwise ➄ Style BT Bearing tap G Guided RG Reversed guided SG Side guard ST Strong (S5) DR Double row sprocket SP Split sprocket F1, F2, F3 Collapse factor modules PA Polyamide PA-HT Polyamide high temperature PBT Polybutylenterephthalate PE Polyethylene PE-MD PE metal detectable POM Polyoxymethylene (Polyacetal) POM-CR POM cut resistant POM-HC POM highly conductive POM-MD POM metal detectable PP Polypropylene Self-extinguishing PXX-HC highly conductive material POM-PE POM side modules + PE center modules POM- PP R1 R2 R3 R4 R5 R6 R7 R8 SER SS TPC1 HA HW POM side modules + PP center modules TPE 80 Shore A, PP EPDM 80 Shore A, vulcanized TPE 70 Shore A, PP TPE 86 Shore A, PP TPE 52 Shore A, PP TPE 63 Shore A, POM TPE 50 Shore A, PP TPE 55 Shore A, PE Self-extinguishing TPE Stainless steel Themoplastic Copolyester Supports the HACCP concept High Wear resistant material AT BL BG BK DB GN LB LG OR RE TR TQ UC WT YL Anthracite Blue Beige Black Dark blue Green Light blue Light gray Orange Red Transparent Turquoise Uncolored White Yellow ➇ Height/Diameter/ Bore size and style Height in Format: Hxxx Pin diameter in Format: Dxxx Bore size: SQ (= square) or RD (= round) either in or es Format: SQxxMM or RDxxIN ➈ Length/ Pins Length in Format: Lxxx Module width in Format: Wxxx HD Hold Down * For each series standard colors please refer to the table of materials for each belt (chapter 1.2). A number of other colors are available on request. Colors can vary from the original due to the print, production processes or material used.