T H E P E R F O R M A Enclosed head design seals out contaminants for improved performance and life. Torque wrap design reduces stress on gear and pawl teeth. Innovative linear ball bearing system eliminates friction between the spring and case for greater accuracy and repeatability. Produces a crisp, audible click over entire torque range. Rubber seal between ratchet head and tube keeps lubrication in and contaminants out of the torque mechanism, assuring accuracy and repeatability. SPEED & Detent locking ring allows easy setting of desired torque and prevents accidental change of torque setting while in use. Lightly knurled and grooved handles provide non-slip grip and comfort. Single pawl, double tooth design will not operate in neutral position.
N C E D I F F E R E N C E 8 ACCESS Unlimited bolt clearance eliminates the need for torque adapters and deep sockets. SPEED ACCESS ACCESS Internal socket engagement gives the Eliminator System up to 50% lower profile. Sockets snap directly into head allowing for greater tooth to pawl engagement resulting in up to 40% more strength. NOTICE NEVER USE CHEATER BARS. DO NOT EXCEED SPECIFIED TORQUE RANGES ON FASTENER OR TORQUE WRENCH. PERIODIC CALIBRATION IS NECESSARY TO MAINTAIN ACCURACY. WE RECOMMEND THIS BE DONE AT LEAST ONCE A YEAR OR EVERY 10,000 TORQUE APPLICATIONS. SECTION 8 CONTENTS Eliminator TM Micrometer Torque Wrenches Micrometer Adjustable Torque Wrenches Torque Screwdrivers Dial Torque Wrenches Deflecting Beam Torque Wrenches Electronic Torque Wrenches Torque Multipliers Electronic Torque Testers
8 ELIMINATOR Micrometer Torque Wrenches 50% Lower Profile Better Access Unlimited Bolt Clearance Eliminates the need for torque adapters and deep sockets. Reduces tendency to tilt wrench handle resulting in greater torque accuracy. 1/4 Eliminator Micrometer Torque Wrenches Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Length Weight Ratchet Blow Mold Number Product No. Range Incr. Range Incr. Width Length Thickness Inches Lbs. Rep. Kit Case 64-130 64-131 4-25 Nm 0.1 Nm 0.878 1.363 0.46 10.9 0.77 10-966 64-293 64-132 64-133 30-200 In/Lb 1 In/Lb 4-23 Nm 0.11 Nm 0.878 1.363 0.46 10.9 0.77 10-966 64-293 3/8 Eliminator Micrometer Torque Wrenches Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Length Weight Ratchet Blow Mold Number Product No. Range Incr. Range Incr. Width Length Thickness Inches Lbs. Rep. Kit Case 64-140 64-141 5-75 Nm 0.5 Nm 1.280 1.985 0.56 17.9 2.27 11-966 64-295 64-142 64-143 150-750 In/Lb 5 In/Lb 1.280 1.985 0.56 17.9 2.27 11-966 64-295 64-144 64-145 5-75 Ft/Lb 0.5 Ft/Lb 10.1-105.1 Nm 0.7 Nm 1.280 1.985 0.56 17.9 2.27 11-966 64-295 Note: All Eliminator torque wrenches may be purchased certified. 8-1 Always wear eye protection when near tools in use.
ELIMINATOR Micrometer Torque Wrenches 8 1/2 Eliminator Micrometer Torque Wrenches Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Length Weight Ratchet Blow Mold Number Product No. Range Incr. Range Incr. Width Length Thickness Inches Lbs. Rep. Kit Case 64-180 64-181 40-340 Nm 2 Nm 1.700 2.300 0.78 22.5 3.24 12-966 64-297 64-182 64-183 300-3000 In/Lb 12 In/Lb 43-348 Nm 1.4 Nm 1.700 2.300 0.78 22.5 3.24 12-966 64-297 64-184 64-185 25-250 Ft/Lb 1 Ft/Lb 43-348 Nm 1.4 Nm 1.700 2.300 0.78 22.5 3.24 12-966 64-297 Pre-Set Eliminator Torque Wrenches Product Certified Drive PRIMARY SCALE ALTERNATE SCALE Head Head Head Length Weight Ratchet Blow Mold Number Product No. Size Range Range Width Length Thickness Inches Lbs. Rep. Kit Case 64-230 64-231 1/4 30-200 In/Lb 4-25 Nm 0.878 1.363 0.46 9.5 0.59 10-966 64-293 64-240 64-241 3/8 150-750 In/Lb 5-75 Nm 1.280 1.985 0.56 16.1 1.98 11-966 64-295 64-280 64-281 1/2 300-3000 In/Lb 40-340 Nm 1.700 2.300 0.78 21.6 3.13 12-966 64-297 Eliminator Sockets and Accessories Sockets may be purchased in sets or individually. Please see the Eliminator section on pages 3-1 to 3-24 for more details. Drive Eliminator Socket Range Eliminator Hex Bit Socket Range Size Fractional Metric Fractional Metric Extensions 1/4" 3/16" - 1/2" 5mm - 13mm 1/16" - 5/16" 2mm - 8mm 1", 2", 4", 6" 3/8" 3/8" - 3/4" 10mm - 19mm 1/8" - 3/8" 4mm - 10mm 1.5", 3" 1/2" 5/8" - 1-1/4" 15mm - 30mm 1/4" - 5/8" 6mm - 17mm 2", 5" 8-2
8 Micrometer Torque Wrenches Micrometer Torque Wrenches ACCURACY OF +/-3% CLOCKWISE (20-100% OF FULL RANGE) Provides precise torque application (Counterclockwise calibration available on special order). HEAD DESIGN SPECIFICALLY FOR TORQUE WRENCHES Enclosed Head - Seals out dirt and contaminants Torque Wrap Design - Reduces stress on gear teeth and pawls for longer life 10 ratcheting angle - Permits use in confined areas OPERATING / DESIGN CAPABILITIES Innovative linear ball bearing mechanism - Assures superior accuracy and repeatability by eliminating friction between the spring and case - Eliminates speed sensibility errors - Produces a crisp, audible click over the entire torque range Rubber seal between ratchet head and tube - Keeps lubrication in, dirt and contaminants out assuring accuracy and repeatability Detent-style locking collar - Allows for ease in setting desired torque - Prevents the accidental change of settings Handles are lightly knurled and grooved - Provides comfortable, non-slid grip 1/4" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head Product PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness Length Weight Ratchet Blow Mold Number Range Incr. Range Incr. Width Length less tang with tang Inches Lbs. Rep. Kit Case 64-031 5-50 In/Lb 1 In/Lb 1.063 1.672 0.469 0.813 8.0.71 64-036 64-293 64-032 30-200 In/Lb 1 In/Lb 4-23 Nm.11 Nm 1.063 1.672 0.469 0.813 9.5.76 64-036 64-293 64-038 4-25 Nm.1 Nm 1.063 1.672 0.469 0.813 9.5.76 64-036 64-293 3/8" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head Product PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness Length Weight Ratchet Blow Mold Number Range Incr. Range Incr. Width Length less tang with tang Inches Lbs. Rep. Kit Case 64-041 50-250 In/Lb 1 In/Lb 6-29 Nm.11 Nm 1.063 1.672 0.469 0.969 9.5.76 64-077 64-295 64-042 100-1000 In/Lb 5 In/Lb 14-116 Nm.6 Nm 1.500 2.125 0.563 1.063 17.1 2.05 64-078 64-295 64-046 10-100 Ft/Lb.5 Ft/Lb 17-139 Nm.7 Nm 1.500 2.125 0.563 1.063 17.1 2.05 64-078 64-295 64-049 10-100 Nm 1 Nm 1.500 2.125 0.563 1.063 17.1 2.05 64-078 64-295 1/2" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head Product PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness Length Weight Ratchet Blow Mold Number Range Incr. Range Incr. Width Length less tang with tang Inches Lbs. Rep. Kit Case 64-081 240-1800 In/Lb 12 In/Lb 34-210 Nm 1.4 Nm 1.750 3.125 0.766 1.438 20.5 2.45 64-077 64-295 64-082 300-3000 In/Lb 12 In/Lb 43-348 Nm 1.4 Nm 1.750 3.125 0.766 1.438 20.5 2.45 64-078 64-295 64-084 10-100 Ft/Lb.5 Ft/Lb 17-139 Nm.7 Nm 1.500 2.125 0.563 1.250 17.1 2.05 64-078 64-295 64-085 10-150 Ft/Lb 1 Ft/Lb 20-210 Nm 1.4 Nm 1.750 3.125 0.766 1.438 20.5 2.45 64-078 64-295 64-086 25-250 Ft/Lb 1 Ft/Lb 43-348 Nm 1.4 Nm 1.750 3.125 0.766 1.438 20.5 2.45 64-078 64-295 64-089 40-340 Nm 2 Nm 1.750 3.125 0.766 1.438 20.5 2.45 64-078 64-295 8-3 Always wear eye protection when near tools in use.
Micrometer Torque Wrenches 8 3/4" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head Product PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness Length Weight Number Range Incr. Range Incr. Width Length less tang with tang Inches Lbs. 64-094 50-400 Ft/Lb 2.5 Ft/Lb 85-559 Nm 3.4 Nm 2.450 3.063 1.700 2.620 33.0 9.62 64-095 100-600 Ft/Lb 2.5 Ft/Lb 153-830 Nm 3.4 Nm 2.450 3.063 1.700 2.620 40.5 10.72 64-099 150-800 Nm 2.5 Nm 2.450 3.063 1.700 2.620 40.5 10.72 Pre-Set Torque Wrenches, Ratchet Head Torque settings must be pre-set by making a simple internal adjustment, using a torque tester to verify the value. Designed for repetitive use in production applications where inadvertent changes to the wrench setting are to be avoided. Rubber grip provides added comfort in repetitive situations. Product Drive Torque Torque Head Head Head Thickness Length Weight Ratchet Blow Mold Number Size Range Range Width Length less tang with tang Inches Lbs. Rep. Kit Case 64-212 1/4" 30-200 In/Lb 4-25 Nm 1.063 1.672 0.469 0.813 9.5.76 64-036 64-293 64-221 3/8" 50-250 In/Lb 6-29 Nm 1.063 1.672 0.469 0.969 9.5.76 64-077 64-295 64-226 3/8" 10-100 Ft/Lb 17-139 Nm 1.500 2.125 0.563 1.063 17.1 2.05 64-078 64-295 64-236 1/2" 25-250 Ft/Lb 43-348 Nm 1.750 3.125 0.766 1.438 20.5 2.45 64-092 64-297 ANSI B107.14M 1/4" Torque Screwdrivers Accuracy of =/-6% clockwise (20-100% of full range). Provides precise torque application. Clutch type release mechanism prevents over torquing. Product PRIMARY SCALE Length Weight Number Range Incr. Inches Lbs. 64-002 20-100 In/oz 2 In/oz 6.8.79 64-005 6-36 In/Lb.5 In/Lb 6.8.79 Screwdrivers with Metric scales are available on special order. Includes 1/4" Drive female Hex adapter ANSI B107.14M 8-4