www.cherubini-group.com 2014 GB

Passion is the driving force behind our work

Our tocco italiano...is a positive attitude to life....is a passionate approach to the world....is an ingenious way of doing things. It is innovation. It is style. It is sensitivity. We have always loved our work, and we fling ourselves into it with passion, day after day. Our secret...is knowing exactly how to build our own future, with daring and dedication: the values that we have passed on from generation to generation.

We pay rigorous attention to detail. We always aim for the highest quality. We have a history of success and we constantly continue to renew and re-invent ourselves....in order to be able to offer our clients high-quality products and service. We listen to the market so we can offer cutting-edge solutions. We talk with our customers in order to best satisfy their needs. We can quickly produce new customized solutions. We are Italian. We work at an industrial level, but with the hearts of craftsmen. Above all, we are a family, and this is our special touch.

We forged metals of every kind by hand. This was the start of our journey. Though many years have gone by, our passion has not changed. In the 70s, we started producing accessories for glass doors; we got into the Swiss market and began making accessories for roller blinds and venetian blinds. In the 80s, we expanded our range with products for sun blinds and screens. Geneva was our first sales office abroad.

1986: Cherubini S.p.A. was started. A group that is now made up of different companies. Our main office is in Bedizzole. We have branches in Milan, Spain, France, China and Germany.

One group, two souls. Forty years of experience in manual operation have led to our over-ten-years of success in the electronic sector, along with all our old passion. We make devices that are safe and reliable, and that are easy to install and program: for the simple management of your products.

Our products The excellence signed Cherubini From the selection of raw materials and components, right up to the final packing, we carefully control the entire process that leads to the creation of our products. That's why we are proud to present them.

selection tables page 19 tubular motors page 29 control systems page 83 accessories page 111 general sales terms and warranty page 124

technology SECURELINE Prevents manipulation of the motor from outside the residence using sequential power supply cuts. Secureline is a security system that requires the auxiliary cable to be connected inside the residence in order to de-program the motor. The auxiliary cable can be used while the unit is powered, preventing electronic faults caused by bad connections. FAST MOTORS High-speed motors. Mainly indicated for very high vertical systems, large horizontal awnings and projection screens. legend symbols AWNINGS PERGOLA ROLLING SHUTTERS services TRAINING We are committed to training as the foundation for proper counseling and installation of our products. The aim of our training courses for professional installers is to prepare our clients and their installers in training and sales counseling. TECHNICAL SERVICE Assistance in the installation, dealingby phone with a technician fromthe Cherubini team, or resolvingpre-installation queries. HAPPY HOME Happy Home is our global system. It provides intelligent solutions for your home. With Happy Home, all applications are mutually compatible. CHERUBINI REMOTE CONTROL The high-performance Rolling Code decoder system works with a limited bandwidth and therefore avoids interference. Easy programming and operation: the motor confirms all the steps by means of small rotations. SCREENS ADJUSTABLE BLINDS TECHNICAL-SALES TEAM The -sales team will assist in identifying your needs so they can offer the most adequate product. Sales and counseling and support for projects and estimates. Direct phone contact with the client and the installation for on-site solutions to any incident or query. legend 16 LEGEND LEGEND 17

selection tables tubular motors for awnings page 20 tubular motors for roller shutters page 22 tubular motors for screens and mosquito nets page 26 selection tables

Tubular motors for awnings Which motor meets my requirements? CHERUBINI offers you this practical guide in order to help you choose the right model of motorfor the installation of your awning. In order to make the right choice, it is necessary to know some characteristics of the awning to be motorized: - WIND-UP ROLLER DIAMETER A larger wind-up diameter requires a higher motor torque - AWNING WIDTH Wind-up roller length - NUMBER OF ARMS The arms are components which strengthen the awning - AWNING PROJECTION Lengthening of the awning arms: a larger projection requires a higher motor torque Having determinated the above data, we have to look for the torque of the required motor in the selection tables. Ø63 Ø70 Ø78 selection tables awnings NUMBER OF ARMS 2 2 2 4 6 AWNING WIDTH (up to) 3,6 m 4,8 m 6 m 12 m 15 m AWNING PROJECTION 1,5 m 25 Nm 25 Nm 32 Nm 40 Nm 85 Nm 2 m 25 Nm 25 Nm 32 Nm 50 Nm 85 Nm 2,5 m 32 Nm 32 Nm 40 Nm 65 Nm 85 Nm 3 m 32 Nm 32 Nm 50 Nm 85 Nm 100 Nm 3,5 m 65 Nm 85 Nm 120 Nm 4 m 85 Nm 100 Nm 120 Nm Example: - Wind-up roller diameter: 70 mm - Number of arms: 2 - Awning projection: 2 m - Awning width: 6 m Ø63 Ø70 Ø78 NUMBER OF ARMS 2 2 2 4 6 AWNING WIDTH (up to) 3,6 m 4,8 m 6 m 12 m 15 m AWNING PROJECTION 1,5 m 25 Nm 25 Nm 32 Nm 40 Nm 85 Nm 2 m 25 Nm 25 Nm 32 Nm 50 Nm 85 Nm 2,5 m 32 Nm 32 Nm 40 Nm 65 Nm 85 Nm 3 m 32 Nm 32 Nm 50 Nm 85 Nm 100 Nm 3,5 m 65 Nm 85 Nm 120 Nm 4 m 85 Nm 100 Nm 120 Nm Tables are purely indicative, as variations can occur according to the installation conditions. Contact our service for more detailed information. Ø85 NUMBER OF ARMS 2 2 2 4 6 AWNING WIDTH (up to) 3,6 m 4,8 m 6 m 12 m 15 m AWNING PROJECTION Tables are purely indicative, as variations can occur according to the installation conditions. Contact our service for more detailed information. 1,5 m 32 Nm 32 Nm 32 Nm 65 Nm 100 Nm 2 m 32 Nm 32 Nm 40 Nm 85 Nm 100 Nm 2,5 m 40 Nm 40 Nm 50 Nm 85 Nm 100 Nm 3 m 40 Nm 40 Nm 65 Nm 100 Nm 120 Nm 3,5 m 85 Nm 120 Nm 120 Nm 4 m 85 Nm 120 Nm 120 Nm selection tables 20 21 TUBULAR MOTORS FOR AWNINGS TUBULAR MOTORS FOR AWNINGS

Tubular motors for roller shutters Which motor meets my requirements? CHERUBINI offers you this practical guide in order to help you choose the right model of motorfor the installation. In order to make the right choice, it is necessary to know some characteristics of the roller shutter to be motorized: selection tables rolling shutters - ROLLER SHUTTER WEIGHT The total weight of the roller shutter is calculated after determining its surface and the weight of the material used per square meter. MATERIAL WEIGHT x SURFACE = ROLLING SHUTTER WEIGHT - WIND-UP ROLLER DIAMETER A larger wind-up roller diameter requires a higher motor torque - PROFILE THICKNESS The profile thickness is of basic importance for the determination of the wind-up diameter generated on the roller. A larger wind-up roller diameter requires a higher motor torque Having determinated the above data, we have to look for the torque of the required motor in the selection tables. Example: - Roller shutter material: aluminium profile 3Kg/m 2 - Rolling shutter height: 2 m - Rolling shutter width: 1,5 m - Wind-up roller: 60 mm ROLLING SHUTTER SURFACE 2 m 1,5 m = 3 m² ROLLING SHUTTER WEIGHT 3 kg/ m² 3 m² = 9 kg Series Ø45 Ø ROLLER 6 Nm 10 Nm 15 Nm 25 Nm 32 Nm 40 Nm 50 Nm Ø50/55 Ø60/65 Ø70/80 Without safety stops 13 kg 21 kg 33 kg 46 kg With safety stops 11 kg 18 kg 29 kg 41 kg Without safety stops 12 kg 19 kg 28 kg 42 kg 54 kg 68 kg 85 kg With safety stops 10 kg 15 kg 23 kg 36 kg 47 kg 58 kg 73 kg Without safety stops 10 kg 15 kg 22 kg 36 kg 47 kg 58 kg 73 kg With safety stops 7 kg 11 kg 17 kg 31 kg 38 kg 48 kg 59 kg The friction safety coefficient has been taken into consideration in the tables. Tables are purely indicative, as variations can occur according to the installation conditions. Contact our service for more detailed information. Series Ø35 PROFILE THICKNESS up to10 mm - Without safety stops ROLLING SHUTTER MAXIMUM HEIGHT 2500 mm Ø ROLLER 3 Nm 5 Nm 9 Nm Ø40 8 kg 13 kg 24 kg Ø45 7 kg 12 kg 21 kg Ø50 6 kg 10 kg 19 kg ROLLING SHUTTER MAXIMUM HEIGHT 3500 mm Ø ROLLER 3 Nm 5 Nm 9 Nm Ø40 7 kg 11 kg 20 kg Ø45 6 kg 11 kg 18 kg Ø50 5 kg 9 kg 17 kg Series Ø45 PROFILE THICKNESS up to10 mm ROLLING SHUTTER MAXIMUM HEIGHT 2500 mm Ø ROLLER 6 Nm 10 Nm 15 Nm 25 Nm 32 Nm 40 Nm 50 Nm Ø50 Ø60 Ø70 Without safety stops 15 kg 25 kg 40 kg 55 kg With safety stops 13 kg 21 kg 35 kg 49 kg Without safety stops 14 kg 23 kg 33 kg 50 kg 65 kg 81 kg 102 kg With safety stops 11 kg 18 kg 27 kg 43 kg 56 kg 70 kg 87 kg Without safety stops 11 kg 18 kg 26 kg 43 kg 56 kg 70 kg 87 kg With safety stops 8 kg 13 kg 20 kg 37 kg 46 kg 58 kg 71 kg ROLLING SHUTTER MAXIMUM HEIGHT 3500 mm Ø ROLLER 6 Nm 10 Nm 15 Nm 25 Nm 32 Nm 40 Nm 50 Nm Ø50 Ø60 Ø70/80 Without safety stops 13 kg 21 kg 33 kg 46 kg With safety stops 11 kg 18 kg 29 kg 41 kg Without safety stops 12 kg 19 kg 28 kg 42 kg 54 kg 68 kg 85 kg With safety stops 10 kg 15 kg 23 kg 36 kg 47 kg 58 kg 73 kg Without safety stops 10 kg 15 kg 22 kg 36 kg 47 kg 58 kg 73 kg With safety stops 7 kg 11 kg 17 kg 31 kg 38 kg 48 kg 59 kg selection tables 22 23 TUBULAR MOTORS FOR ROLLER SHUTTERS TUBULAR MOTORS FOR ROLLER SHUTTERS

Tubular motors for roller shutters Which motor meets my requirements? selection tables rolling shutters Series Ø45 PROFILE THICKNESS from 11 to 15 mm ROLLING SHUTTER MAXIMUM HEIGHT 2500 mm Ø ROLLER 6 Nm 10 Nm 15 Nm 25 Nm 32 Nm 40 Nm 50 Nm Ø50 Ø60 Without safety stops 13 kg 21 kg 32 kg 48 kg With safety stops 10 kg 17 kg 27 kg 42 kg Without safety stops 11 kg 18 kg 27 kg 44 kg 57 kg 71 kg 88 kg With safety stops 8 kg 14 kg 23 kg 38 kg 47 kg 61 kg 75 kg selection tables rolling shutters Series Ø58 ROLLING SHUTTER MAXIMUM HEIGHT 2500 mm Ø ROLLER 65 Nm 85 Nm 100 Nm 120 Nm Ø70 100 kg 125 kg 145 kg 170 kg Ø90 85 kg 105 kg 125 kg 155 kg Ø102 75 kg 95 kg 115 kg 130 kg Ø133 50 kg 70 kg 80 kg 100 kg Ø70/80 Without safety stops 10 kg 15 kg 23 kg 38 kg 48 kg 61 kg 75 kg With safety stops 7 kg 11 kg 18 kg 31 kg 38 kg 51 kg 60 kg ROLLING SHUTTER MAXIMUM HEIGHT 3500 mm Ø ROLLER 65 Nm 85 Nm 100 Nm 120 Nm ROLLING SHUTTER MAXIMUM HEIGHT 3500 mm Ø ROLLER 6 Nm 10 Nm 15 Nm 25 Nm 32 Nm 40 Nm 50 Nm Without safety stops 11 kg 18 kg 27 kg 40 kg Ø50 With safety stops 8 kg 14 kg 23 kg 35 kg Ø70 85 kg 104 kg 121 kg 142 kg Ø90 70 kg 88 kg 104 kg 129 kg Ø102 65 kg 79 kg 96 kg 108 kg Ø133 45 kg 58 kg 67 kg 83 kg Ø60 Without safety stops 10 kg 15 kg 23 kg 37 kg 48 kg 59 kg 73 kg With safety stops 7 kg 12 kg 19 kg 32 kg 39 kg 51 kg 63 kg Ø70/80 Without safety stops 8 kg 13 kg 19 kg 32 kg 40 kg 50 kg 63 kg With safety stops 6 kg 9 kg 15 kg 26 kg 32 kg 43 kg 50 kg The friction safety coefficient has been taken into consideration in the tables. Tables are purely indicative, as variations can occur according to the installation conditions. Contact our service for more detailed information. The friction safety coefficient has been taken into consideration in the tables. Tables are purely indicative, as variations can occur according to the installation conditions. Contact our service for more detailed information. selection tables 24 25 TUBULAR MOTORS FOR ROLLER SHUTTERS TUBULAR MOTORS FOR ROLLER SHUTTERS

Tubular motors for screens and mosquito nets Which motor meets my requirements? CHERUBINI offers you this practical guide in order to help you choose the right model of motorfor the installation. In order to make the right choice, it is necessary to know some characteristics of the system to be motorized: - WIND-UP ROLLER DIAMETER A larger wind-up diameter requires a higher motor torque - FABRIC WEIGHT PER SQUARE METER - SURFACE (width and height) - BOTTOM RAIL WEIGHT Having determinated the above data, we have to look for the torque of the required motor in the selection tables. Example: Fabric = 0,5 kg/m² Height = 5 m Width = 4 m Bottom rail weight = 4 kg Wind-up roller diameter = 78 mm SURFACE = WIDTH x HEIGHT = 4x5 = 20 m² SYSTEM WEIGHT = SURFACE x FABRIC WEIGHT = 20 m² x 0,5kg/m² = 10 kg TOTAL WEIGHT = SYSTEM WEIGHT + BOTTOM RAIL WEIGHT = 10 + 4 kg = 14 kg selection tables screens & mosquito nets Series Ø35 3 Nm 5 Nm 9 Nm Ø ROLLER 30 rpm 30/21 rpm 16 rpm Ø40 11 kg 15 kg 28 kg Ø50 7 kg 12 kg 23 kg Ø60-9 kg 18 kg Series Ø45 6Nm 10 Nm 15 Nm 25 Nm Ø ROLLER 17 rpm 17 rpm 17/30 rpm 17 rpm Ø50 18 kg 30 kg 45 kg 65 kg Series Ø45 6 Nm 10 Nm 15 Nm 25 Nm Ø ROLLER 17 rpm 17 rpm 17/30 rpm 17 rpm Ø50 18 kg 30 kg 45 kg 65 kg Ø60 15 kg 24 kg 40 kg 57 kg Ø70-21 kg 33 kg 51 kg Ø78-17 kg 27 kg 45 kg Ø60 15 kg 24 kg 40 kg 57 kg Ø70-21 kg 33 kg 51 kg Ø78-17 kg 27 kg 45 kg Tables are purely indicative, as variations can occur according to the installation conditions. Contact our service for more detailed information. The friction safety coefficient has been taken into consideration in the tables. Tables are purely indicative, as variations can occur according to the installation conditions. Contact our service for more detailed information. selection tables 26 27 TUBULAR MOTORS FOR SCREENS AND MOSQUITO NETS TUBULAR MOTORS FOR SCREENS AND MOSQUITO NETS

tubular motors motors Ø 35 Motor with wire control - Mechanical limit switch ROLL Ø35 p. 30 Motor with built-in receiver - Electronic limit switch WAVE RX Ø35 p. 32 Motor with built-in receiver - Electronic limit switch TRONIC RX Ø35 p. 34 Motor with wire control - Electronic limit switch PLUG&PLAY PLUS Ø35 p. 36 motors Ø 45 Motor with wire control - Mechanical limit switch ROLL p. 38 Motor with wire control - Mechanical limit switch ROLL EASY p. 40 Motor with wire control - Mechanical limit switch MICRO / MICRO EASY p. 42 Motor with wire control - Mechanical limit switch GARDA p. 44 Motor with built-in receiver - Mechanical limit switch GARDA RX p. 46 Motor with override - Mechanical limit switch OCEAN p. 48 Motor with built-in receiver - Electronic limit switch WAVE RX p. 50 Motor with built-in receiver - Electronic limit switch TRONIC RX p. 52 Motor with built-in receiver - Electronic limit switch TRONIC RX V32 p. 54 Motor with wire control - Electronic limit switch WAVE WIRE p. 56 Motor with wire control - Electronic limit switch PLUG&PLAY PLUS p. 58 Motor with wire control - Electronic limit switch PLUG&PLAY p. 60 Motor with wire control - Electronic limit switch PLUG&PLAY SHORT p. 62 Motor with built-in receiver - Electronic limit switch PLUG&PLAY SHORT RX p. 64 motors Ø 58 Motor with wire control - Mechanical limit switch GARDA p. 66 Motor with override - Mechanical limit switch OCEAN p. 68 Motor with built-in receiver - Electronic limit switch WAVE RX p. 70 Motor with built-in receiver - Electronic limit switch TRONIC RX p. 72 Motor with built-in receiver - Electronic limit switch TRONIC RX V32 p. 74 Motor with wire control - Electronic limit switch WAVE WIRE p. 76 fast motors p. 78 innovative fixing-system p. 80 tubular motors

blue roll Ø35 MOTOR WITH WIRE CONTROL blue roll Ø35 the motor ideal for screens and blinds Mechanical limit switch Reliable and easy adjustment of the limit switches. Fixed limit switch position. Strength and safety The star-shaped metallic reducer pin makes the motor highly reliable. 3/30 5/30 5/21 9/16 Motor torque (Nm) 3 5 5 9 Speed (rpm) 30 30 21 16 Mechanical limit switch 35 35 35 35 Power (W) 105 120 105 120 Power supply (V/Hz) 230/50 230/50 230/50 230/50 Consumption (A) 0,4 0,5 0,4 0,5 Cable 4 x 0,75 (m) lg. 2,5 lg. 2,5 lg. 2,5 lg. 2,5 Operating time (min) 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 Weight (kg) 1,55 1,55 1,55 1,55 L1 (mm) 477 477 477 477 dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 main characteristics compatible systems Code Torque Speed Certification AMP35033000 3 Nm 30 rpm AMP35053000 5 Nm 30 rpm AMP35052100 5 Nm 21 rpm AMP35091600 9 Nm 16 rpm Skipper Senso One-channel remote control with integrated light and temperature sensors. It enables the desired light and temperature levels to be maintained, in summer and winter. Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Compact Roll and OPTime radio receivers Small radio receivers. Compatible with the Skipper remote controls. For the complete range of compatible systems see "Compatibility Table" on page 84 Blue Bus Allows the central command of different range of motors. tubular motors 30 BLUE ROLL Ø35 BLUE ROLL Ø35 31

blue wave rx Ø35 MOTOR WITH BUILT-IN RECEIVER blue wave rx Ø35 ideal for screens and mosquito nets Electronic limit switch with built-in receiver (wired) Simple and intuitive adjustment of the limit switch from the remote control. The encoder technology makes it possible tokeep the position set with optimum precision and reliability. Safety and simplicity High-safety coding system Rolling Code. Easy programming and operation: the motor confirms all thesteps by means of small rotations. Adjustment of the closing force. The possibility to adjust the applied force ensures the perfect closing of the cassette awnings in all situations and avoids the danger of over-stretching the awning fabric. Specific functions Super-sensitivity function on obstacle detection, easy setting with remote control on 3 levels, especially for screens and mosquito blinds. Mechanical stop during closing. Possibility of memorizing an intermediate position. Setting possible with remote control or wired switch. Optional connections Wired switch. Connection to the WindTec climatic controls via radio. 3/30 5/30 9/16 Motor torque (Nm) 3 5 9 Speed (rpm) 30 30 16 Power (W) 105 120 120 Power supply (V/Hz) 230/50 230/50 230/50 Radio frequency (MHz) 433,92 433,92 433,92 Consumption (A) 0,4 0,5 0,5 Cable 4 x 0,75 (m) lg. 2,45 lg. 2,45 lg. 2,45 Operating time (min) 4 4 4 Protection degree IP44 IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 15 Weight (kg) 1,65 1,65 1,65 L1 (mm) 547 547 547 dimensions BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN L1 main characteristics compatible systems Code Torque Speed Certification AET35033000 3 Nm 30 rpm AET35053000 5 Nm 30 rpm AET35091600 9 Nm 16 rpm Skipper Senso One-channel remote control with integrated light and temperature sensors. It enables the desired light and temperature levels to be maintained, in summer and winter. Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Domotic TX remote control It gives the possibility of adapting motors to the house domotic system via radio. For the complete range of compatible systems see "Compatibility Table" on page 84 Climatic controls Windtec Wind and sun/ wind sensors with connectionto the motor via radio (wireless). tubular motors 32 BLUE WAVE RX Ø35 BLUE WAVE RX Ø35 33

blue tronic rx Ø35 MOTOR WITH BUILT-IN RECEIVER blue tronic rx Ø35 designed for the application on french doors with small cassette Electronic limit switch with built-in receiver (wired) Simple and intuitive adjustment of the limit switch from the remote control. The encoder technology makes it possible tokeep the position set with optimum precision and reliability. Safety and simplicity High-safety coding system Rolling Code. Easy programming and operation: the motor confirms all thesteps by means of small rotations. Specific functions Manual and semi-automatic adjustment of the limit switch. Obstacle detection on both directions, sensitivity setting on 3 levels possible. The Super-sensitivity function on obstacle detection down-wards, easy setting with remote control on 3 levels. Possibility of memorizing an intermediate position. Setting possible with remote control or wired switch. Optional connections Wired switch. 5/21 9/16 Motor torque (Nm) 5 9 Speed (rpm) 21 16 Power (W) 105 120 Power supply (V/Hz) 230/50 230/50 Radio frequency (MHz) 433,92 433,92 Consumption (A) 0,4 0,5 Cable 4 x 0,75 (m) lg. 2,45 lg. 2,45 Operating time (min) 4 4 Protection degree IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 Weight (kg) 1,65 1,65 L1 (mm) 547 547 dimensions BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN L1 main characteristics compatible systems Code Torque Speed Certification AER35052100 5 Nm 21 rpm AER35091600 9 Nm 16 rpm Skipper Senso One-channel remote control with integrated light and temperature sensors. It enables the desired light and temperature levels to be maintained, in summer and winter. Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. For the complete range of compatible systems see "Compatibility Table" on page 84 Domotic Remote Control It gives the possibility ofadapting motors to thehouse domotic systemvia radio. tubular motors 34 BLUE TRONIC RX Ø35 BLUE TRONIC RX Ø35 35

blue plug&play plus Ø35 blue plug&play plus Ø35 MOTOR WITH WIRE CONTROL more than a motor, a system Electronic limit switch with wire control and encoder This motor is recommended as drive system for interior and exterior "monobloc" shutters. Easy to install Insert the motor into the tube, connect it to the power supply and it's ready. When using mechanical stops no adjustment required. Versatile Without mechanical blocks upwards or downwards, one or both limit switches may be set on the external button panel. DEDICATED BUTTON PANEL NOT REQUIRED! Protection against freezing The motor will not operate if the guides and/or slats are frozen. Specific functions Automatic adjustment of the limit switch. Obstacle recognition either upwards or downwards. May be connected either directly or in parallel. 5/30 9/16 Motor torque (Nm) 5 9 Speed (rpm) 30 16 Power (W) 120 120 Power supply (V/Hz) 230/50 230/50 Consumption (A) 0,5 0,5 Cable 4 x 0,75 (m) lg. 2,4 lg. 2,4 Operating time (min) 4 4 Protection degree IP44 IP44 Weight (kg) 1,65 1,65 L1 (mm) 547 547 mechanical blocks For automatic adjustment theaccessories indicated in points Aand B are required. A safety or end stops dimensions L1 BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 B visible or hidden stoppers main characteristics compatible systems Code Torque Speed Certification AEQ35053000 5 Nm 30 rpm AEQ35091600 9 Nm 16 rpm Blue Bus Allows the central command of different range of motors. For the complete range of compatible systems see "Compatibility Table" on page 84 tubular motors 36 BLUE PLUG&PLAY PLUS Ø35 BLUE PLUG&PLAY PLUS Ø35 37

blue roll Ø45 MOTOR WITH WIRE CONTROL blue roll Ø45 The ideal motor for motorising rolling shutters and screens Mechanical limit switch Reliable and easy adjustment of the limit switches. Fixed limit switch position. Strength and safety The star-shaped technopolymer (6-30 Nm) or Zama (40-50 Nm) reducer pin makes the motor highly reliable. 6/17 10/17 15/17 25/17 30/17 40/17 50/12 7/30 15/30 Motor torque (Nm) 6 10 15 25 30 40 50 7 15 Speed (rpm) 17 17 17 17 17 17 12 30 30 No. of turns before stop* 25 25 25 25 25 25 25 37 37 Power (W) 110 135 170 225 250 275 275 170 250 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50 Consumption (A) 0,5 0,6 0,8 1 1,1 1,25 1,25 0,8 1,1 Cable** 4 x 0,75 (m) lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 Operating time (min) 4 4 4 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 IP44 IP44 IP44 Weight (kg) 1,75 2,00 2,25 2,55 2,55 3,05 3,05 2,25 2,55 L1 (mm) 476 496 546 546 546 546 546 546 546 *Upon request, available with 37 turns before stop **Possibility of cable with Hirschmann STAS 3 dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 main characteristics Code Head Torque Speed Certification AMP45061700 Plastic material 6 Nm 17 rpm AMP45101700 Plastic material 10 Nm 17 rpm AMP45151700 Plastic material 15 Nm 17 rpm AMP45251700 Plastic material 25 Nm 17 rpm AMP45301700 Plastic material 30 Nm 17 rpm AMP45401700 Plastic material 40 Nm 17 rpm AMP45501200 Plastic material 50 Nm 12 rpm AMP45073000 Plastic material 7 Nm 30 rpm AMP45153000 Plastic material 15 Nm 30 rpm This motor is compatible with the fastening system compatible systems Skipper series remote controls One-channel, multi-channel, wall-mounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Compact Roll and OPTime radio receivers Small radio receivers. Compatible with the Skipper remote controls. For the complete range of compatible systems see "Compatibility Table" on page 84 Blue Bus Allows the central command of different range of motors. tubular motors 38 BLUE ROLL Ø45 BLUE ROLL Ø45 39

blue roll easy Ø45 MOTOR WITH WIRE CONTROL blue roll easy Ø45 This fast coupling motor is ideal for construction sites Mechanical limit switch Reliable and easy adjustment of the limit switches. Quick installation The connector system makes installation very quick and easy. Strength and safety The star-shaped technopolymer reducer pin makes the motor highly reliable. 10/17 15/17 25/17 Motor torque (Nm) 10 15 25 Speed (rpm) 17 17 17 No. of turns before stop* 25 25 25 Power (W) 135 170 225 Power supply (V/Hz) 230/50 230/50 230/50 Consumption (A) 0,6 0,8 1 Cable 4 x 0,75 lg. 14 cm (connector included) lg. 14 cm (connector included) lg. 14 cm (connector included) Operating time (min) 4 4 4 Protection degree IP44 IP44 IP44 Weight (kg) 1,80 2,05 2,35 L1 (mm) 496 546 546 *Upon request, available with 37 turns before stop dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 main characteristics Cable*: A4503_0333 length 1 m A4503_0311 length 2 m A4503_0314 length 4 m *Choose the suitable length for the cable. (The cable is provided separately from the motor). compatible systems Code Torque Speed Certification AMA45101705 10 Nm 17 rpm Ø18 mm AMA45151705 15 Nm 17 rpm AMA45251705 25 Nm 17 rpm This motor is compatible with the fastening system Skipper series remote controls OPTime radio receiver Blue Bus One-channel, multi-channel, wall-mounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Quick coupling small radio receiver. Compatible with the Skipper remote controls. For the complete range of compatible systems see "Compatibility Table" on page 84 Allows the central command of different range of motors. tubular motors 40 BLUE ROLL EASY Ø45 BLUE ROLL EASY Ø45 41

blue micro Ø45 blue micro easy Ø45 MOTOR WITH WIRE CONTROL Ideal for limited spaces Mechanical limit switch Reliable and easy adjustment of the limit switches. Strength and safety The star-shaped technopolymer reducer pin makes the motor highly reliable. SMALL MOTOR (43,8 cm) blue micro Ø45 blue micro easy Ø45 10/17 10/17 Motor torque (Nm) 10 10 Speed (rpm) 17 17 Mechanical limit switch 25 25 Power (W) 135 135 Power supply (V/Hz) 230/50 230/50 Consumption (A) 0,6 0,6 Cable 4 x 0,75 (m) lg. 2,5 lg. 14 cm (connector included) Operating time (min) 4 4 Protection degree IP44 IP44 Weight (kg) 1,90 1,70 L1 (mm) 421 421 dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 main characteristics Cable*: A4503_0333 length 1 m A4503_0311 length 2 m A4503_0314 length 4 m *Choose the suitable length for the cable. (The cable is provided separately from the motor). compatible systems Code Description Torque Speed Certification AMC45101705 10 Nm 17 rpm AMC45101725 with connector 10 Nm 17 rpm This motor is compatible with the fastening system Skipper series remote controls One-channel, multi-channel, wall-mounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Compact Roll and OPTime radio receivers Small radio receivers. Compatible with the Skipper remote controls. For the complete range of compatible systems see "Compatibility Table" on page 84 Blue Bus Allows the central command of different range of motors. tubular motors 42 BLUE MICRO Ø45 - BLUE MICRO EASY Ø45 BLUE MICRO Ø45 - BLUE MICRO EASY Ø45 43

blue garda Ø45 MOTOR WITH WIRE CONTROL blue garda Ø45 Mechanical limit switch Reliable and easy adjustment of the limit switches. Fastening without brackets The motor can be fastened directly to the bracket without needing additional supports. Strength and safety The star-shaped metallic reducer pin makes the motor highly reliable. 10/17 15/17 25/17 32/17 40/17 50/12 Motor torque (Nm) 10 15 25 32 40 50 Speed (rpm) 17 17 17 17 17 12 No. of turns before stop* 25 25 25 25 25 25 Power (W) 150 170 225 250 275 275 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 Consumption (A) 0,7 0,8 1 1,1 1,25 1,25 Cable** 4 x 0,75 (m) lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 Operating time (min) 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 Weight (kg) 2,75 2,75 3,10 3,10 3,10 3,10 L1 (mm) 546 546 546 546 546 546 *Upon request, available with 37 turns before stop **Possibility of cable with Hirschmann STAS 3 dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 M6 main characteristics compatible systems Code Torque Speed Certification AME45101700 10 Nm 17 rpm AME45151700 15 Nm 17 rpm AME45251700 25 Nm 17 rpm AME45321700 32 Nm 17 rpm AME45401700 40 Nm 17 rpm AME45501200 50 Nm 12 rpm Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Radio receivers for awnings These receivers make it possible to activate mechanical motors automatically. Radio receivers for rolling shutters Small radio receivers. Compatible with the Skipper remote controls. For the complete range of compatible systems see "Compatibility Table" on page 84 Climatic controls WindTec and WindTec SC Radio Wind- & Sun sensor (wireless) and Wind sensor (wired). tubular motors 44 BLUE GARDA Ø45 BLUE GARDA Ø45 45

M6 blue garda rx Ø45 MOTOR WITH BUILT-IN RECEIVER blue garda rx Ø45 Mechanical limit switch with in-built receiver Reliable and easy adjustment of the limit switches. Fastening without brackets The motor can be fastened directly to the bracket without needing additional supports. Strength and safety The star-shaped metallic reducer pin makes the motor highly reliable. Safety and simplicity High-safety coding system Rolling Code. Easy programming and operation: the motor confirms all thesteps by means of small rotations. Inlet for external sensor Possibility of connecting the WindTec SE wind sensor directly. 10/17 15/17 25/17 32/17 40/17 50/12 Motor torque (Nm) 10 15 25 32 40 50 Speed (rpm) 17 17 17 17 17 12 Mechanical limit switch 25 25 25 25 25 25 Power (W) 150 170 225 250 275 275 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 Radio frequency (MHz) 433,92 433,92 433,92 433,92 433,92 433,92 Consumption (A) 0,7 0,8 1 1,1 1,25 1,25 Cable 5 x 0,75 (m) lg. 2,75 lg. 2,75 lg. 2,75 lg. 2,75 lg. 2,75 lg. 2,75 Operating time (min) 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 15 15 15 15 Weight (kg) 3,15 3,15 3,45 3,45 3,45 3,45 L1 (mm) 646 646 646 646 646 646 dimensions WHITE ORANGE BROWN - PHASE BLUE - NEUTRAL YELLOW - GREEN L1 main characteristics compatible systems Code Torque Speed Certification AMT45101700 10 Nm 17 rpm AMT45151700 15 Nm 17 rpm AMT45251700 25 Nm 17 rpm AMT45321700 32 Nm 17 rpm AMT45401700 40 Nm 17 rpm AMT45501200 50 Nm 12 rpm Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Domotic Remote Control It gives the possibility ofadapting motors to thehouse domotic systemvia radio. For the complete range of compatible systems see "Compatibility Table" on page 84 WindTec SE anemometer Climatic control to protect the awning from the sun and the wind. tubular motors 46 BLUE GARDA RX Ø45 BLUE GARDA RX Ø45 47

blue ocean Ø45 MOTOR WITH OVERRIDE blue ocean Ø45 Mechanical limit switch Reliable and easy adjustment of the limit switches. Double access to the adjusting screws. Compact override Thanks to its small size, this device can be installed in limited spaces. The reduction ratio is 1:24. Fastening without brackets The motor can be fastened directly to the bracket without needing additional supports. Strength and safety The star-shaped metallic reducer pin makes the motor highly reliable. 15/17 25/17 32/17 40/17 50/12 Motor torque (Nm) 15 25 32 40 50 Speed (rpm) 17 17 17 17 12 Mechanical limit switch 32 32 32 32 32 Power (W) 170 225 250 275 275 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 Consumption (A) 0,8 1 1,1 1,25 1,25 Cable* 4 x 0,75 (m) lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 Operating time (min) 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 Weight (kg) 3,50 3,80 3,80 3,80 3,80 L1 (mm) 646 646 646 646 646 *Possibility of cable with Hirschmann STAS 3 accessories for manual operation dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 Ref. 7463 150G 2101 Foldable crank with hook length 150 cm Ref. 6010 7008 CH16 Eye with hexagon 7 86 mm HEXAGON ESAGONO 7-7 QUADRO - SQUARE 6 6 Ref. 9100 150L CH02 Operating crank length 150 cm For a complete list see Accessories for Manual Operation on page 122 main characteristics Code Torque Speed Certification AMS45151700 15 Nm 17 rpm AMS45251700 25 Nm 17 rpm AMS45321700 32 Nm 17 rpm AMS45401700 40 Nm 17 rpm AMS45501200 50 Nm 12 rpm compatible systems Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. For the complete range of compatible systems see "Compatibility Table" on page 84 Climatic controls WindTec and WindTec SC Radio Wind- & Sun sensor (wireless) and Wind sensor (wired). AUTOMATION OF THE MOTOR WITH MANUAL OVERRIDE DEVICE! Blue Ocean combined with these control units becomes a radio controlled motor and takes on these functions: TDS Compact: Obstacle recognition during closing. Closing force adjustment on 3 levels possible. First middle position programmable from the remote control. Second middle position programmable from the remote control and controlled by the WindTec Lux light sensor. Compact ROLL: Obstacle detection on both directions, sensitivity setting on 3 levels possible. Two middle positions that are programmable and usable from the remote control. Moving the override NHK-gear, the end positions remain unchanged. tubular motors 48 BLUE OCEAN Ø45 BLUE OCEAN Ø45 49

blue wave rx Ø45 MOTOR WITH BUILT-IN RECEIVER blue wave rx Ø45 one single motor to fulfil all applications blue wave rx version 25 specific for awnings with automatic locking Ask your local dealer for details! Electronic limit switch with built-in receiver (wired) Safety and simplicity Easy programming and operation: the motor confirms all thesteps by means of small rotations. Adjustment of the closing force. The possibility to adjust the applied force ensures the perfect closing of the cassette awnings in all situations and avoids the danger of over-stretching the awning fabric. Specific functions Obstacle detection up-wards, sensitivity setting on 3 levels possible. Mechanical stop during closing. Possibility of memorizing an intermediate position. Setting possible with remote control or wired switch. Optional connections Wired switch. Connection to WindTec, Mistral and Rugiada climatic controls via radio. Fastening without brackets Thanks to the metallic head, the motor can be fastened directly to the bracket. New functions for pergolas and verandas: 10/17 15/17 25/17 32/17 40/17 50/12 7/30 15/30 Motor torque (Nm) 10 15 25 32 40 50 7 15 Speed (rpm) 17 17 17 17 17 12 30 30 Power (W) 150 170 225 250 275 275 170 250 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50 Radio frequency (MHz) 433,92 433,92 433,92 433,92 433,92 433,92 433,92 433,92 Consumption (A) 0,7 0,8 1 1,1 1,25 1,25 0,8 1,1 Cable 4 x 0,75 (m) lg. 4,6 lg. 4,6 lg. 4,6 lg. 4,6 lg. 4,6 lg. 4,6 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 15 15 15 15 15 15 Weight (kg) 3,10 3,10 3,40 3,40 3,40 3,40 3,10 3,40 L1 (mm) 546 546 646 646 646 646 546 646 dimensions BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN On pitched pergolas the motor stops automatically when the fabric reaches its point of greatest extension: performing a remote control sequence is sufficient to program the limit switches. From that moment onwards each time the motor reaches the opening limit switch position, it stops so that it keeps the awning fabric taut. L1 main characteristics For pergolas and horizontal awnings it is possible to activate the Fabric Tightening function: the motor, after reaching the outer limit, automatically performs a short backwards turn to tighten the fabric. compatible systems *Ø5 Head in plastic Code Torque Speed Certification AET45101700 10 Nm 17 rpm AET45151700 15 Nm 17 rpm AET45251700 25 Nm 17 rpm AET45321700 32 Nm 17 rpm AET45401700 40 Nm 17 rpm AET45501200 50 Nm 12 rpm AET45073000 Head in plastic 7 Nm 30 rpm AET45153000 Head in plastic 15 Nm 30 rpm Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Rugiada TX Radio Rain-sensor Rain-sensor wireless set on Cherubini Domotic transmitter. For the complete range of compatible systems see "Compatibility Table" on page 84 climatic controls WindTec and Mistral Wind-sensor, Wind- & Sun-sensor and wireless vibrating Wind-sensor. tubular motors 50 BLUE WAVE RX Ø45 BLUE WAVE RX Ø45 51

Ø5* blue tronic rx Ø45 MOTOR WITH BUILT-IN RECEIVER blue tronic rx Ø45 safety and comfort Electronic limit switch with built-in receiver (wired) Simple and intuitive adjustment of the limit switch from the remote control. The encoder technology makes it possible tokeep the position set with optimum precision and reliability. Safety and simplicity High-safety coding system Rolling Code. Easy programming and operation: the motor confirms all thesteps by means of small rotations. Specific functions Manual and semi-automatic adjustment of the limit switch. Obstacle detection on both directions, sensitivity setting on 3 levels possible. Possibility of memorizing an intermediate position. Setting possible with remote control or wired switch. Optional connections Wired switch. 6/17 10/17 15/17 25/17 32/17 40/17 50/12 Motor torque (Nm) 6 10 15 25 32 40 50 Speed (rpm) 17 17 17 17 17 17 12 Power (W) 110 150 170 225 250 275 275 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 230/50 Radio frequency (MHz) 433,92 433,92 433,92 433,92 433,92 433,92 433,92 Consumption (A) 0,5 0,7 0,8 1 1,1 1,25 1,25 Cable 4 x 0,75 (m) lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 15 15 15 15 15 Weight (kg) 2,00 2,30 2,30 2,60 3,20 3,20 3,20 L1 (mm) 546 546 546 646 646 646 646 dimensions BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN L1 *M6 for head in Zama main characteristics compatible systems Code Head Torque Speed Certification AER45061700 AER45101700 AER45151700 AER45251700 Plastic material Plastic material Plastic material Plastic material 6 Nm 17 rpm 10 Nm 17 rpm 15 Nm 17 rpm 25 Nm 17 rpm AER45321700 Zama 32 Nm 17 rpm AER45401700 Zama 40 Nm 17 rpm AER45501200 Zama 50 Nm 12 rpm Skipper Senso Skipper series remote controls Domotic Remote Control One-channel remote control with integrated light and temperature sensors. It enables the desired light and temperature levels to be maintained, in summer and winter. One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. For the complete range of compatible systems see "Compatibility Table" on page 84 It gives the possibility ofadapting motors to thehouse domotic systemvia radio. tubular motors 52 BLUE TRONIC RX Ø45 BLUE TRONIC RX Ø45 53

Ø5* blue tronic rx v32 Ø45 blue tronic rx v32 Ø45 MOTOR WITH BUILT-IN RECEIVER specific for adjustable blinds Electronic limit switch with built-in receiver (wired) Simple and intuitive adjustment of the limit switch from the remote control. The encoder technology makes it possible tokeep the position set with optimum precision and reliability. Specific functions Manual and semi-automatic adjustment of the limit switch. Obstacle detection on both directions, sensitivity setting on 3 levels possible. Possibility to set the tilting type (3 versions available). Possibility of memorizing an intermediate position. Setting possible with remote control or wired switch. Safety and simplicity High-safety coding system Rolling Code. Easy programming and operation: the motor confirms all thesteps by means of small rotations. Optional connections Wired switch. 10/12 15/12 25/12 32/12 40/12 50/12 Motor torque (Nm) 10 15 25 32 40 50 Speed (rpm) 12 12 12 12 12 12 Power (W) 135 150 215 225 250 275 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 Radio frequency (MHz) 433,92 433,92 433,92 433,92 433,92 433,92 Consumption (A) 0,6 0,7 0,95 1 1,1 1,25 Cable 4 x 0,75 (m) lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 15 15 15 15 Weight (kg) 2,30 2,63 2,63 3,20 3,20 3,20 L1 (mm) 546 546 646 646 646 646 dimensions BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN L1 *M6 for head in Zama main characteristics compatible systems Code Head Torque Speed Certification AER45101232 AER45151232 AER45251232 Plastic material Plastic material Plastic material 10 Nm 12 rpm 15 Nm 12 rpm 25 Nm 12 rpm AER45321232 Zama 32 Nm 12 rpm AER45401232 Zama 40 Nm 12 rpm AER45501232 Zama 50 Nm 12 rpm Skipper series remote controls Domotic Remote Control Blue Bus One-channel, multi-channel, wall-mounted remote controls and multifunction remote control with LCD colour screen and built-in timer. It gives the possibility ofadapting motors to thehouse domotic systemvia radio. For the complete range of compatible systems see "Compatibility Table" on page 84 Allows the central command of different range of motors. tubular motors 54 BLUE TRONIC RX V32 Ø45 BLUE TRONIC RX V32 Ø45 55

blue wave wire Ø45 MOTOR WITH WIRE CONTROL blue wave wire Ø45 the Plug & Play for awnings Electronic limit switch with wire control and encoder EASY TO INSTALL, EASY TO PROGRAM! With cassette awnings, the motor can set the upper limit switch (closing position) automatically. For other types of awnings it s possible to set both limit switches manually, through simple sequences on the control panel. Adjustment of the limit switches through control panel: no need to access the motor head. DEDICATED BUTTON PANEL NOT REQUIRED! Specific functions May be connected either directly or in parallel. 10/17 15/17 25/17 32/17 40/17 50/12 7/30 15/30 Motor torque (Nm) 10 15 25 32 40 50 7 15 Speed (rpm) 17 17 17 17 17 12 30 30 Power (W) 150 170 225 250 275 275 170 250 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50 Consumption (A) 0,7 0,8 1 1,1 1,25 1,25 0,8 1,1 Cable 4 x 0,75 (m) lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 IP44 IP44 Weight (kg) 2,30 2,30 2,60 3,45 3,45 3,45 3,10 3,40 L1 (mm) 546 546 646 646 646 646 546 646 dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 * *Ø5 Head in plastic main characteristics compatible systems Code Head Torque Speed Certification AEW45101700 Zama 10 Nm 17 rpm AEW45151700 Zama 15 Nm 17 rpm AEW45251700 Zama 25 Nm 17 rpm AEW45321700 Zama 32 Nm 17 rpm AEW45401700 Zama 40 Nm 17 rpm AEW45501200 Zama 50 Nm 12 rpm AEW45073000 Plastic material 7 Nm 30 rpm AEW45153000 Plastic material 15 Nm 30 rpm Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. TDS Gold radioreceiver This receiver makes it possible to activate mechanical motors automatically. Climatic controls WindTec and WindTec SC Radio Wind- & Sun sensor (wireless) and Wind sensor (wired). For the complete range of compatible systems see "Compatibility Table" on page 84 Blue Bus Allows the central command of different range of motors. tubular motors 56 BLUE WAVE WIRE Ø45 BLUE WAVE WIRE Ø45 57

blue plug&play plus Ø45 blue plug&play plus Ø45 MOTOR WITH WIRE CONTROL more than a motor, a system Electronic limit switch with wire control and encoder This motor is recommended as drive system for interior and exterior "monobloc" shutters. Easy to install Insert the motor into the tube, connect it to the power supply and it's ready. When using mechanical stops no adjustment required. Versatile Without mechanical blocks upwards or downwards, one or both limit switches may be set on the external button panel. DEDICATED BUTTON PANEL NOT REQUIRED! Protection against freezing The motor will not operate if the guides and/or slats are frozen. Specific functions Automatic adjustment of the limit switch. Obstacle recognition either upwards or downwards. May be connected either directly or in parallel. 6/17 10/17 15/17 25/17 32/17 40/17 50/12 Motor torque (Nm) 6 10 15 25 32 40 50 Speed (rpm) 17 17 17 17 17 17 12 Power (W) 110 150 170 225 250 275 275 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 230/50 Consumption (A) 0,5 0,7 0,8 1 1,1 1,25 1,25 Cable 4 x 0,75 (m) lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 IP44 Weight (kg) 2,00 2,30 2,30 2,60 3,45 3,45 3,45 L1 (mm) 546 546 546 646 646 646 646 mechanical blocks For automatic adjustment theaccessories indicated in points Aand B are required. A safety or end stops dimensions L1 BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 B visible or hidden stoppers Ø5 main characteristics compatible systems Code Head Torque Speed Certification AEQ45061705 AEQ45101705 AEQ45151705 AEQ45251705 AEQ45321705 AEQ45401705 AEQ45501205 Plastic material Plastic material Plastic material Plastic material Plastic material Plastic material Plastic material 6 Nm 17 rpm 10 Nm 17 rpm 15 Nm 17 rpm 25 Nm 17 rpm 32 Nm 17 rpm 40 Nm 17 rpm 50 Nm 12 rpm Blue Bus Allows the central command of different range of motors. For the complete range of compatible systems see "Compatibility Table" on page 84 tubular motors 58 BLUE PLUG&PLAY PLUS Ø45 BLUE PLUG&PLAY PLUS Ø45 59

blue plug&play Ø45 blue plug&play Ø45 MOTOR WITH WIRE CONTROL more than a motor, a system Electronic limit switch (wired) This motor is recommended as drive system for interior and exterior "monobloc" shutters. Easy to install Insert the motor into the tube, connect it to the power supply and it's ready. No adjustment required. Self-learning Limit switches are optimized owing to the constant torque metering for theentire path the blinds take. Protection against freezing The motor will not operate if the guides and/or slats are frozen. Specific functions Automatic adjustment of the limit switch. Obstacle recognition either upwards or downwards. May be connected either directly or in parallel. 6/17 10/17 15/17 Motor torque (Nm) 6 10 15 Speed (rpm) 17 17 17 Power (W) 110 135 170 Power supply (V/Hz) 230/50 230/50 230/50 Consumption (A) 0,5 0,6 0,8 Cable 4 x 0,75 (m) lg. 2,65 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 Protection degree IP44 IP44 IP44 Weight (kg) 1,90 2,00 2,25 L1 (mm) 496 496 546 installation Installation is very simple: once the motor is installed into the tube it adjusts itself automatically. For this A and B are necessary. A safety or end stops dimensions L1 Brown - Rotation R1 Black - Rotation R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 B visible or hidden stoppers Ø5 main characteristics compatible systems Code Head Torque Speed Certification AEP45061705 AEP45101705 Plastic material Plastic material 6 Nm 17 rpm 10 Nm 17 rpm AEP45151705 Plastic material 15 Nm 17 rpm For higher motor torque ratings see Plug & Play Plus page 58 Blue Bus Allows the central command of different range of motors. For the complete range of compatible systems see "Compatibility Table" on page 84 tubular motors 60 BLUE PLUG&PLAY Ø45 BLUE PLUG&PLAY Ø45 61

blue plug&play short Ø45 blue plug&play short Ø45 MOTOR WITH WIRE CONTROL All of the Plug & Play functions in just 36 cm! Electronic limit switch (wired) This motor is recommended as drive system for interior and exterior "monobloc" shutters. Easy to install Insert the motor into the tube, connect it to the power supply and it's ready. No adjustment required. Self-learning Limit switches are optimized owing to the constant torque metering for theentire path the blinds take. Protection against freezing The motor will not operate if the guides and/or slats are frozen. Specific functions Automatic adjustment of the limit switch. Obstacle recognition either upwards or downwards. May be connected either directly or in parallel. installation Installation is very simple: once the motor is installed into the tube it adjusts itself automatically. For this A and B are necessary. A safety or end stops 6/17 Motor torque (Nm) 6 Speed (rpm) 17 Power (W) 110 Power supply (V/Hz) 230/50 Consumption (A) 0,5 Cable 4 x 0,75 (m) lg 2,7 17 cm from the motor to the electronic board - 2.5 m from the board Operating time (min) 4 Protection degree IP44 Weight (kg) 1,65* L1 (mm) 343 * Including the control unit dimensions motor and control unit 360 mm 343 mm BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 B visible or hidden stoppers 115 Ø5 36 main characteristics compatible systems 20,5 Code Head Torque Speed Certification 6 Nm AES45061705 Plastic material 6 Nm 17 rpm Blue Bus Allows the central command of different range of motors. For the complete range of compatible systems see "Compatibility Table" on page 84 tubular motors 62 BLUE PLUG&PLAY SHORT Ø45 BLUE PLUG&PLAY SHORT Ø45 63

blue plug&play short rx Ø45 blue plug&play short rx Ø45 MOTOR WITH BUILT-IN RECEIVER All of the Plug & Play functions, plus radio-control, in just 36 cm! Electronic limit switch with radio and wired control This motor is recommended as drive system for interior and exterior "monobloc" shutters. Easy to install Insert the motor into the tube, connect it to the power supply and it's ready. Safety and simplicity High-safety coding system Rolling Code. Easy programming and operation: the motor confirms all the steps by means of small rotations. Self-learning Limit switches are optimized owing to the constant torque metering for theentire path the blinds take. Protection against freezing The motor will not operate if the guides and/or slats are frozen. Specific functions Automatic adjustment of the limit switch. Obstacle detection in both directions, with drive inversion. Possibility to memorize 2 middle position; to activate by remote control and button. With closing force adjustment. Super-sensitivity function in obstacle detection going downwards (may be activated from remote control or wired switch), avoids the complete pile down of the slats. Optional connections Wired switch. installation 6/17 Motor torque (Nm) 6 Speed (rpm) 17 Power (W) 110 Power supply (V/Hz) 230/50 Radio frequency (MHz) 433,92 Consumption (A) 0,5 Cable 4 x 0,75 (m) 2,7 Operating time (min) 4 Protection degree IP44 Receiver storage capacity (No. Remote controls) 15 Weight (kg) 1,65* L1 (mm) 343 *Including the control unit dimensions motor and control unit 360 mm 343 mm 17 cm from the motor to the control unit - 2,5 m from control unit Installation is very simple: once the motor is installed into the tube it adjusts itself automatically. For this A and B are necessary. A safety or end stops Ø5 BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN 115 36 main characteristics B visible or hidden stoppers compatible systems 20,5 Code Head Torque Speed Certification 6N Nm AEX45061700 Plastic material 6 Nm 17 rpm Skipper Senso Skipper series remote controls Domotic Remote Control One-channel remote control with integrated light and temperature sensors. It enables the desired light and temperature levels to be maintained, in summer and winter. One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. For the complete range of compatible systems see "Compatibility Table" on page 84 It gives the possibility ofadapting motors to thehouse domotic systemvia radio. tubular motors 64 BLUE PLUG&PLAY SHORT RX Ø45 BLUE PLUG&PLAY SHORT RX Ø45 65

blue garda Ø58 MOTOR WITH WIRE CONTROL blue garda Ø58 Mechanical limit switch Reliable and easy adjustment of the limit switches. Strength and safety The star-shaped metallic reducer pin makes the motor highly reliable. Fastening without brackets The motor can be fastened directly to the bracket without needing additional supports. 65/17 85/17 100/11 120/11 20/75 40/32 Motor torque (Nm) 65 85 100 120 20 40 Speed (rpm) 17 17 11 11 75 32 No. of turns before stop* 25 25 25 25 37 37 Power (W) 330 375 360 415 360 360 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 Consumption (A) 1,5 1,7 1,6 1,9 1,6 1,6 Cable** 4 x 0,75 (m) lg. 2,5 lg. 2,5 lg. 2,5 lg. 2,5 lg. 2,5 lg. 2,5 Operating time (min) 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 Weight (kg) 5,70 5,70 5,70 5,70 5,70 5,70 L1 (mm) 646 646 646 646 646 646 *Upon request, available with 37 turns before stop **Possibility of cable with Hirschmann STAS 3 dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 main characteristics compatible systems Code Torque Speed Certification AME58061700 65 Nm 17 rpm AME58081700 85 Nm 17 rpm AME58101100 100 Nm 11 rpm AME58121100 120 Nm 11 rpm AME58027500 20 Nm 75 rpm AME58043200 40 Nm 32 rpm Skipper series remote controls One-channel, multi-channel, wall-mounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Radio receivers for awnings These receivers make it possible to activate mechanical motors automatically. Radio receivers for rolling shutters Small radio receivers. Compatible with the Skipper remote controls. For the complete range of compatible systems see "Compatibility Table" on page 84 Climatic controls WindTec and WindTec SC Radio Wind- & Sun sensor (wireless) and Wind sensor (wired). tubular motors 66 BLUE GARDA Ø58 BLUE GARDA Ø58 67

blue ocean Ø58 MOTOR WITH OVERRIDE blue ocean Ø58 Mechanical limit switch Reliable and easy adjustment of the limit switches. Double access to the adjusting screws. Strength and safety The star-shaped metallic reducer pin makes the motor highly reliable. Fastening without brackets The motor can be fastened directly to the bracket without needing additional supports. Compact override Thanks to its small size, this device can be installed in limited spaces. The reduction ratio is 1:55. 65/17 85/17 100/11 120/11 20/75 Motor torque (Nm) 65 85 100 120 20 Speed (rpm) 17 17 11 11 75 Mechanical limit switch 29 29 29 29 29 Power (W) 330 375 360 415 360 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 Consumption (A) 1,5 1,7 1,6 1,9 1,6 Cable* 4 x 0,75 (m) lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 lg. 2,45 Operating time (min) 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 Weight (kg) 7 7 7 7 7 L1 (mm) 703 703 703 703 703 *Possibility of cable with Hirschmann STAS 3 accessories for manual operation dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 Ref. 7463 150G 2101 Foldable crank with hook length 150 cm Ref. 6010 7008 CH16 Eye with hexagon 7 86 mm 90 24 3 ESAGONO HEXAGON 7 -- QUADRO SQUARE 66 L1 65 48 M6 58 105 Ref. 9100 150L CH02 Operating crank length 150 cm For a complete list see Accessories for Manual Operation on page 122 85 main characteristics Code Torque Speed Certification AMS58061700 65 Nm 17 rpm AMS58081700 85 Nm 17 rpm AMS58101100 100 Nm 11 rpm AMS58121100 120 Nm 11 rpm AMS58027500 20 Nm 75 rpm compatible systems Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Climatic controls WindTec and WindTec SC Radio Wind- & Sun sensor (wireless) and Wind sensor (wired). For the complete range of compatible systems see "Compatibility Table" on page 84 AUTOMATION OF THE MOTOR WITH MANUAL OVERRIDE DEVICE! Blue Ocean combined with these control units becomes a radio controlled motor and takes on these functions: TDS Compact: Obstacle recognition during closing. Closing force adjustment on 3 levels possible. First middle position programmable from the remote control. Second middle position programmable from the remote control and controlled by the WindTec Lux light sensor. Compact ROLL: Obstacle detection on both directions, sensitivity setting on 3 levels possible. Two middle positions that are programmable and usable from the remote control. Moving the override NHK-gear, the end positions remain unchanged. tubular motors 68 BLUE OCEAN Ø58 BLUE OCEAN Ø58 69

blue wave rx Ø58 MOTOR WITH BUILT-IN RECEIVER blue wave rx Ø58 one single motor to fulfil all applications blue wave rx version 25 specific for awnings with automatic locking Ask your local dealer for details! Electronic limit switch with built-in receiver (wired) Safety and simplicity Easy programming and operation: the motor confirms all thesteps by means of small rotations. Adjustment of the closing force. The possibility to adjust the applied force ensures the perfect closing of the cassette awnings in all situations and avoids the danger of over-stretching the awning fabric. Specific functions Obstacle detection up-wards, sensitivity setting on 3 levels possible. Mechanical stop during closing. Possibility of memorizing an intermediate position. Setting possible with remote control or wired switch. Optional connections Wired switch. Connection to WindTec, Mistral and Rugiada climatic controls via radio. Fastening without brackets Thanks to the metallic head, the motor can be fastened directly to the bracket. New functions for pergolas and verandas: 65/17 85/17 100/11 120/11 20/75 40/32 Motor torque (Nm) 65 85 100 120 20 40 Speed (rpm) 17 17 11 11 75 32 Power (W) 330 375 360 415 360 360 Power supply (V/Hz) 230/50 230/50 230/50 230/50 230/50 230/50 Radio frequency (MHz) 433,92 433,92 433,92 433,92 433,92 433,92 Consumption (A) 1,5 1,7 1,6 1,9 1,6 1,6 Cable 4 x 0,75 (m) lg. 4,6 lg. 4,6 lg. 4,6 lg. 4,6 lg. 4,6 lg. 4,6 Operating time (min) 4 4 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 15 15 15 15 Weight (kg) 6,10 6,10 6,10 6,10 6,10 6,10 L1 (mm) 646 646 646 646 646 646 dimensions BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN On pitched pergolas the motor stops automatically when the fabric reaches its point of greatest extension: performing a remote control sequence is sufficient to program the limit switches. From that moment onwards each time the motor reaches the opening limit switch position, it stops so that it keeps the awning fabric taut. L1 main characteristics For pergolas and horizontal awnings it is possible to activate the Fabric Tightening function: the motor, after reaching the outer limit, automatically performs a short backwards turn to tighten the fabric. compatible systems Code Torque Speed Certification AET58061700 65 Nm 17 rpm AET58081700 85 Nm 17 rpm AET58101100 100 Nm 11 rpm AET58121100 120 Nm 11 rpm AET58027500 20 Nm 75 rpm AET58043200 40 Nm 32 rpm Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Rugiada TX Radio Rain-sensor Rain-sensor wireless set on Cherubini Domotic transmitter. For the complete range of compatible systems see "Compatibility Table" on page 84 climatic i controls WindTec and Mistral Wind-sensor, Wind- & Sun-sensor and wireless vibrating Wind-sensor. tubular motors 70 BLUE WAVE RX Ø58 BLUE WAVE RX Ø58 71

blue tronic rx Ø58 MOTOR WITH BUILT-IN RECEIVER blue tronic rx Ø58 safety and comfort Electronic limit switch with built-in receiver (wired) Simple and intuitive adjustment of the limit switch from the remote control. The encoder technology makes it possible tokeep the position set with optimum precision and reliability. Safety and simplicity High-safety coding system Rolling Code. Easy programming and operation: the motor confirms all thesteps by means of small rotations. Specific functions Manual and semi-automatic adjustment of the limit switch. Obstacle detection on both directions, sensitivity setting on 3 levels possible. Possibility of memorizing an intermediate position. Setting possible with remote control or wired switch. Optional connections Wired switch. 65/17 85/17 100/11 120/11 Motor torque (Nm) 65 85 100 120 Speed (rpm) 17 17 11 11 Power (W) 330 375 360 415 Power supply (V/Hz) 230/50 230/50 230/50 230/50 Radio frequency (MHz) 433,92 433,92 433,92 433,92 Consumption (A) 1,5 1,7 1,6 1,9 Cable 4 x 0,75 (m) lg. 2,65 lg. 2,65 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 4 Protection degree IP44 IP44 IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 15 15 Weight (kg) 5,90 5,90 5,90 5,90 L1 (mm) 646 646 646 646 dimensions BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN L1 main characteristics compatible systems Code Torque Speed Certification AER58061700 65 Nm 17 rpm AER58081700 85 Nm 17 rpm AER58101100 100 Nm 11 rpm AER58121100 120 Nm 11 rpm Skipper series remote controls One-channel, multi-channel, wall-mounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Domotic Remote Control It gives the possibility ofadapting motors to thehouse domotic systemvia radio. For the complete range of compatible systems see "Compatibility Table" on page 84 tubular motors 72 BLUE TRONIC RX Ø58 BLUE TRONIC RX Ø58 73

blue tronic rx v32 Ø58 blue tronic rx v32 Ø58 MOTOR WITH BUILT-IN RECEIVER specific for adjustable blinds Electronic limit switch with built-in receiver (wired) Simple and intuitive adjustment of the limit switch from the remote control. The encoder technology makes it possible tokeep the position set with optimum precision and reliability. Specific functions Manual and semi-automatic adjustment of the limit switch. Obstacle detection on both directions, sensitivity setting on 3 levels possible. Possibility to set the tilting type (3 versions available). Possibility of memorizing an intermediate position. Setting possible with remote control or wired switch. Safety and simplicity High-safety coding system Rolling Code. Easy programming and operation: the motor confirms all thesteps by means of small rotations. Optional connections Wired switch. 85/12 100/11 120/11 Motor torque (Nm) 85 100 120 Speed (rpm) 12 11 11 Power (W) 330 360 415 Power supply (V/Hz) 230/50 230/50 230/50 Radio frequency (MHz) 433,92 433,92 433,92 Consumption (A) 1,5 1,6 1,9 Cable 4 x 0,75 (m) lg. 2,65 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 Protection degree IP44 IP44 IP44 Receiver storage capacity (No. Remote controls) 15 15 15 Weight (kg) 5,90 5,90 5,90 L1 (mm) 646 646 646 dimensions BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN L1 main characteristics compatible systems Code Torque Speed Certification AER58081232 85 Nm 12 rpm AER58101132 100 Nm 11 rpm AER58121132 120 Nm 11 rpm Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. Domotic Remote Control It gives the possibility ofadapting motors to thehouse domotic systemvia radio. For the complete range of compatible systems see "Compatibility Table" on page 84 tubular motors 74 BLUE TRONIC RX V32 Ø58 BLUE TRONIC RX V32 Ø58 75

blue wave wire Ø58 MOTOR WITH WIRE CONTROL blue wave wire Ø58 the Plug & Play for awnings Electronic limit switch with wire control and encoder EASY TO INSTALL, EASY TO PROGRAM! With cassette awnings, the motor can set the upper limit switch (closing position) automatically. For other types of awnings it s possible to set both limit switches manually, through simple sequences on the control panel. Adjustment of the limit switches through control panel: no need to access the motor head. DEDICATED BUTTON PANEL NOT REQUIRED! Specific functions May be connected either directly or in parallel. 65/17 85/17 120/11 Motor torque (Nm) 65 85 120 Speed (rpm) 17 17 11 Power (W) 330 375 415 Power supply (V/Hz) 230/50 230/50 230/50 Consumption (A) 1,5 1,7 1,9 Cable 4 x 0,75 (m) lg. 2,65 lg. 2,65 lg. 2,65 Operating time (min) 4 4 4 Protection degree IP44 IP44 IP44 Weight (kg) 5,90 5,90 5,90 L1 (mm) 646 646 646 dimensions BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 L1 main characteristics compatible systems Code Torque Speed Certification AEW58061700 65 Nm 17 rpm AEW58081700 85 Nm 17 rpm AEW58121100 120 Nm 11 rpm Skipper series remote controls One-channel, multi-channel, wallmounted remote controls and multifunction remote control with LCD colour screen and built-in timer. TDS Gold radioreceiver This receiver makes it possible to activate mechanical motors automatically. Climatic controls WindTec and WindTec SC Radio Wind- & Sun sensor (wireless) and Wind sensor (wired). For the complete range of compatible systems see "Compatibility Table" on page 84 Blue Bus Allows the central command of different range of motors. tubular motors 76 BLUE WAVE WIRE Ø58 BLUE WAVE WIRE Ø58 77

L1 fast motors Roll Roll 035 Mechanical limit switch Code Torque Speed Weight (Kg) L1 (mm) Certification For details: 3/30 AMP35033000 3 Nm 30 rpm 1,55 477 Page 30 5/30 AMP35053000 5 Nm 30 rpm 1,55 477 Page 30 Roll 045 Mechanical limit switch 7/30 AMP45073000 7 Nm 30 rpm 2,25 546 Page 38 15/30 AMP45153000 15 Nm 30 rpm 2,55 546 Page 38 Wave Wire Wave Wire 045 Electronic limit switch with wire control and encoder 7/30 AEW45073000 7 Nm 30 rpm 3,10 546 Page 56 15/30 AEW45153000 15 Nm 30 rpm 3,40 646 Page 56 Wave RX 035 Electronic limit switch and built-in radio 3/30 AET35033000 3 Nm 30 rpm 1,65 547 Page 32 5/30 AET35053000 5 Nm 30 rpm 1,65 547 Page 32 Wave RX Wave RX 045 Electronic limit switch and built-in radio 7/30 AET45073000 7 Nm 30 rpm 3,10 546 Page 50 15/30 AET45153000 15 Nm 30 rpm 3,40 646 Page 50 Wave RX 058 Electronic limit switch and built-in radio 20/75 AET58027500 20 Nm 75 rpm 6,10 646 Page 70 40/32 AET58043200 systems 40 Nm 32 rpm 6,10 646 Page 70 Garda Garda 058 Mechanical limit switch 20/75 AME58027500 20 Nm 75 rpm 5,70 646 Page 66 40/32 AME58043200 40 Nm 32 rpm 5,70 646 Page 66 Ocean Ocean 058 Mechanical limit switch with override device 20/75 AMS58027500 20 Nm 75 rpm 7,00 703 Page 68 tubular motors 78 FAST MOTORS FAST MOTORS 79

innovative fixing-system NEW PATENTED ATTACHMENT WITHOUT BRACKETS Thanks to the clamp in sintered steel the motor-head can be directly fixed on the bolt of the aluminum side cover ATTACHMENT ACHM WITH CLAMP The new head allows the: avoiding to use a bracket reduce the time and cost of installationthe new head allows the Shortly on all Cherubini motors with electronic limit switch with plastic head, up to 15 Nm. tubular motors 80 INNOVATIVE FIXING-SYSTEM INNOVATIVE FIXING-SYSTEM 81

Control systems compatibility table p. 84 Skipper series remote controls SKIPPER p. 86 SKIPPER PLUS p. 86 SKIPPER LUX p. 87 SKIPPER P-LUX p. 87 SKIPPER WALL p. 88 SKIPPER POCKET p. 88 SKIPPER LCD p. 90 SKIPPER SENSO p. 92 climatic controls WINDTEC LUX p. 94 WINDTEC p. 94 WINDTEC SC p. 94 WINDTEC SE p. 94 MISTRAL p. 96 RAIN-SENSOR p. 97 accessories for domotics DOMOTIC RX RECEIVER p. 98 BUS MODULES p. 100 EXPANSION MODULE p. 102 DOMOTIC TX TRANSMITTER p. 103 control units and receivers RADIO RECEIVER FOR AWNINGS TDS COMPACT p. 104 RADIO RECEIVER FOR AWNINGS TDS GOLD p. 104 CONTROL UNIT FOR AWNINGS TDS SILVER p. 104 RADIO RECEIVER FOR BLINDS AND AWNINGS MINI p. 105 RADIO RECEIVER FOR AWNINGS TANDEM p. 105 RADIO RECEIVER FOR ROLLING SHUTTERS OPTIME p. 106 RADIO RECEIVER FOR ROLLING SHUTTERS COMPACT ROLL p. 106 RADIO RECEIVER FOR VENETIAN BLIND MOTORS ORIENS CRC p. 107 electrical accessories TIMERS p. 108 "COMFORT" SIGNAL REPEATER p. 109 MULTIPLE CONTROL RELAY p. 109 PROGRAMMING CABLES p. 109 SOLEXA p. 109 control systems

Automation Systems Compatibility Table ELECTRONIC LIMIT SWITCH AND BUILT-IN RECEIVER MECHANICAL LIMIT SWITCH WITH BUILT-IN RECEIVER ELECTRONIC LIMIT SWITCH WITH WIRE CONTROL MECHANICAL LIMIT SWITCH MECHANICAL LIMIT SWITCH WITH OVERRIDE DEVICE A510008 Expansion module A510023 A510024 A510025 A510026 Timers A510027 A510028 A510029 A520007 A520008 A520011 A520012 A520016 Rugiada Skipper series remote controls Blue Wave RX Blue Tronic RX Blue Tronic RX V32 Blue Plug&Play Short RX Blue Garda RX Blue Plug&Play Plus Blue Plug&Play Short Blue Plug&Play Blue Wave Wire Blue Garda Blue Roll Blue Roll Easy Blue Micro Blue Micro Easy Blue Ocean for additional compatibilities see table below A530058 A530065 Domotic Remote Control The following motors, together with the control units indicated, become compatible with other automation systems: ELECTRONIC LIMIT SWITCH WITH WIRE CONTROL MECHANICAL LIMIT SWITCH MECHANICAL LIMIT SWITCH WITH OVERRIDE DEVICE MECHANICAL LIMIT SWITCH WITH CONNECTOR A520007 A520008 A520010 A520012 A520017 Goccia A520016 Rugiada Skipper series remote controls Blue Plug&Play Plus + Blue Plug&Play Short Blue Plug&Play Blue Wave Wire main Blue Garda characteristics systems Blue Roll Blue Micro + Blue Ocean A530058 A530065 Domotic Remote Control + Blue Roll Easy Blue Micro Easy *Except Garda Ø58 and Ocean Ø58 tubular control systems motors 84 AUTOMATION SYSTEMS COMPATIBILITY TABLE AUTOMATION SYSTEMS COMPATIBILITY TABLE 85

series remote controls series remote controls Skipper Skipper - Design and functionality, allowing intuitive controlof the motor and a most aesthetic result. - Includes a wall support that combines with any décor. - The AAA batteries used give the transmitter a long battery life and are easy to obtain and replace. One-channel remote control, for one receiver or one group of receivers. LUX function This remote control function allows you to enable or disable the solar function in motors and receivers that are compatible with Windtec Lux climate controls. - Design and functionality, allowing intuitive controlof the motor and a most aesthetic result. - Includes a wall support that combines with any décor. - The AAA batteries used give the transmitter a long battery life and are easy to obtain and replace. One-channel remote control with activation/ deactivation of the Lux function. Number of channels 1 Consumption during operation 20 ma Irradiated RF power (ERP) 8 mw Number of channels 1 Consumption during operation 90 ma Irradiated RF power (ERP) 3 mw versions versions Code Model* Colour A530031L Skipper White A530037L Skipper Black A530033L Skipper Plus White A530039L Skipper Plus Black *wall bracket supplied Power supply 2,4V - 3V dc Consumption in the stand-by mode 30 μa Type of battery 2 x LR03 (AAA) Transmission frequency 433,92 MHz Modulation AM/ASK Decoder system Rolling code Operating range in open spaces 100-150 m Operating temperature -10 ºC + 50 ºC Dimensions (mm) 140 x 45 x 25 Weight 100 g Skipper Multi-channel remote control with 7 individual channels and one global channel. Allow the display to show only the channels in use. Number of channels 7 Consumption during operation 90 ma Irradiated RF power (ERP) 3 mw Code Model* Colour A530032L Skipper Lux White A530038L Skipper Lux Black A530034L Skipper P-Lux White A530040L Skipper P-Lux Black *wall bracket supplied systems Power supply 2,4V - 3V dc Consumption in the stand-by mode 30 μa Type of battery 2 x LR03 (AAA) Transmission frequency 433,92 MHz Modulation AM/ASK Decoder system Rolling code Operating range in open spaces 100-150 m Operating temperature -10 ºC + 50 ºC Dimensions (mm) 140 x 45 x 25 Weight 100 g Skipper Multi-channel remote control with 7 individual channels and one global channel. Allow the display to show only the channels in use. The Lux function allows you to enable or disable the solar function individually, or globally in channel 0. Number of channels 7 Consumption during operation 90 ma Irradiated RF power (ERP) 3 mw tubular control systems motors 86 SKIPPER SERIES REMOTE CONTROLS SKIPPER SERIES REMOTE CONTROLS 87

Code Model Colour A530036 Skipper Wall White A530042 Skipper Wall Black versions Power supply 2,4V - 3V dc Consumption in the stand-by mode 4 μa Type of battery 1 x CR2032 Transmission frequency 433,92 MHz Modulation AM/ASK Decoder system Rolling Code Operating range in open spaces 100-150 m Operating temperature -10 ºC + 50 ºC Dimensions (mm) 80 x 80 x 15,3 Weight 55 g Skipper One-channel wall-mounted remote control for one receiver or one group of receivers. - A transmitter with a shallow, square design that can be inset into the wall. - It includes a completely removable wall support. - The support can be adjusted to correspond with universal mounting boxes, to cover over any gaps in brickwork. Number of channels 1 Consumption during operation 10 ma Irradiated RF power (ERP) 1 mw Skipper LCD. The entire house at your fingertips. Code Model Colour A530054 Skipper Pocket White A530058 Skipper Pocket 4C White versions Power supply 12V dc Type of battery 23A/L1028 Transmission frequency 433,92 MHz Modulation AM/ASK Decoder system Rolling Code Operating range in open spaces 150-250 m Operating temperature -10 ºC + 55 ºC Dimensions (mm) 81 x 46 x 16 Weight 40 g Skipper Small remote control that can be carried on a key ring or in your pocket. Design and functionality allow intuitive control of the motor. A530054 SKIPPER POCKET One-channel remote control. STOP STOP UP DOWN A530054 A530058 Number of channels 1 4 Consumption during operation 25 ma 25 ma Irradiated RF power (ERP) 0,1-0,2 mw 0,1-0,2 mw A530058 SKIPPER POCKET 4C Remote control with 4 independent channels and stepby-step operation mode. AWNINGS Blue Wave RX Ø 45/58 page 50-70 Skipper P-Lux page 87 WindTec Lux page 94 SCREENS Blue Wave RX Ø 35 page 32 page 92 ROLLING SHUTTERS Blue Tronic RX Ø 35/45/58 page 34-52-72 Skipper Wall page 88 tubular control systems motors 88 SKIPPER SERIES REMOTE CONTROLS SKIPPER SERIES REMOTE CONTROLS 89

series remote controls Skipper SKIPPER LCD is a multifunction remote control with a 1,8" colour LCD display. Symbols together with the colour LCD display make handlingof the remote control very intuitive for the user, with all availableinformation clearly displayed. It supports the control of up to 50 devices and the creation of 10 scenarios and 16 groups. GROUPS AND AUTOMATIONS Symbols together with the colour LCD display make handlingof the remote control very intuitive for the user, with all availableinformation clearly displayed. You can group by room, floor, facade, office, giving each group a name of your choice and making simple to apply acentralised action to all of them at once. SCENARIOS One of the remote control's key is the creation of scenarios. These allow you to create an appropriate environment, to reflect the circumstances, at the touch of a button (for example: (1)'Night', blinds close, awnings retract (2)'Summer', blinds open, awnings are set automatically,...) PROGRAMMABLE TIMER To complete the functions above you have the possibility to actionall of them automatically, at a predetermined time or at differenttimes throughout the day, to simulate someone being at home. Theuser always has the choice to activate these actions manually orautomatically. SOLAR FUNCTION For installations which use the Windtec Lux (sun-wind) automated system, there's also the option to selectively activate or deactivate the solar function by individual devices, groups or scenarios. The AAA batteries used give the transmitter a long battery life and are easy to obtain and replace. versions Code Model* Colour A530035L Skipper LCD White A530041L Skipper LCD Black *wall bracket supplied groups You can create up to 16 groups. SYSTEM STATUS examples of groups Awnings group scenarios examples of functions A group is a group of actuators. Groups are used to globalise functions in the quickest, most comfortable manner, so that you can program in a faster, more intuitive way. Actuators can grouped in any way you wish: by type of actuator (blinds, awnings, screens, etc), by floor (1st floor, 2nd floor, etc), by rooms (dining room, lounge, bedrooms), etc. Screens group "Rolling shutters" group A scenario is a function that allows you to control several actuators or groups that you have defined. This function allows you to determine the functions that each actuator or group will carry out when you activate the scene. With the Skipper LCD transmitter, you can create up to 10 different scenes. examples of scenes Number of channels 50 Consumption during operation 90 ma Visualization LCD graphic display RGB 1,8" Control device type Joystick type Irradiated RF power (ERP) 1 mw Power supply 2,4V - 3V dc Consumption in the stand-by mode 30 μa Type of battery 2 x LR03 (AAA) Transmission frequency 433,92 MHz Modulation AM/ASK Decoder system Rolling code Operating range in open spaces 100-150 m Operating temperature -10 ºC + 50 ºC Dimensions (mm) 140 x 45 x 25 Weight 100 g SYSTEM STATUS Night-time scene Lower the Rolling shutters group Retract the Awnings group Close the Screens group Summer-time scene Driving up-wards Rolling-shutter group "Awnings" group in automatic operation "Screens" group to its ideal intermediate position tubular control systems motors 90 SKIPPER SERIES REMOTE CONTROLS SKIPPER SERIES REMOTE CONTROLS 91

series remote controls Skipper Senso. Just the light you want. Remote control with integrated brightness and temperature sensor for indoor LCD colour screen 1,8" Skipper Senso enables the desired light and temperature levels to bemaintained inside the room. Shutters and screens will automatically adjustwhen the set thresholds have been reached. During the summer months the Skipper Senso adjusts the opening andclosing of blinds and screens to provide protection from the sun s rays,whilst in winter it uses solar radiation to integrate the heating of theenvironment. Easy to use: When desired light and temperature levels have been set bythe user the remote control unit is placed in the appropriate location inthe wall mounting bracket supplied. The intuitive graphical interface ensures the Senso s ease of use. SUMMER WINTER Too much light? Too hot? CONF NFOR ORT Too dark? Too cold? system status legend Number of channels 1 Consumption during operation 90 ma Visualization LCD graphic display RGB 1,8" Control device type Joystick type Irradiated RF power (ERP) 1 mw versions Code Model* Colour A530063L Skipper Senso White *wall bracket supplied Power supply 2,4V - 3V dc Consumption in the stand-by mode 30 μa Type of battery 2 x LR03 (AAA) Transmission frequency 433,92 MHz Modulation AM/ASK Decoder system Rolling code Operating range in open spaces 100-150 m Operating temperature -10 ºC + 50 ºC Dimensions (mm) 140 x 45 x 25 Weight 100 g 1 2 4 5 7 8 10 13 17 SYSTEM STATUS Automatic 08:00/17:00 Brightness: 0135 Temperature: 20 C Mar 15:22 Thresh./Main menu Quick start 3 6 9 11 12 14 15 16 1. Command transmission indicator 2. Remote control battery level 3. System time 4. Screens name 5. Active operational mode 6. Automation operational timetable (if enabled) 7. Season option active: Summer/Winter 8. Last command sent 9. Temporarily disable automatic operation 10. Twilight threshold 11. Brightness value in real time 12. Brightness bar 13. Brightness hysteresis frame 14. Temperature value in real time 15. Temperature bar 16. Temperature intervention threshold 17. Navigation menu tubular control systems motors 92 SKIPPER SERIES REMOTE CONTROLS SKIPPER SERIES REMOTE CONTROLS 93

climatic controls WindTec A520008 WindTec Lux anemometer ability to control the climate Built-in radio receiver (only WindTec and WindTec Lux) No wiring between the motor and the control unit. Wind- & Sun sensor (WIRELESS) (only WindTec Lux) The awning works automatically and is protected from the wind. Compatible with all series The line of climatic control systems is compatible with all our series of motors. (see Compatibility Table on page 84-85). Reliability and safety The high-performance Rolling Code decoder system works with a limited bandwidth and therefore avoids interference. Practical Adjustable support that can be mounted on a surface at any angle. - Wind- & Sun sensor (WIRELESS) - Wireless connection between the motor and theradio receiver - Threshold adjustment directly on the device - Compatible with Blue Wave RX motors and TDS Gold (A510020), TDS Compact (A510038) and RX Mini (A510036) radio receivers TDS Gold TDS Compact Rx Mini Garda Ocean Micro Roll Wave Wire Wave RX fastening methods A520007 WindTec anemometer versions Press - Wind sensor (WIRELESS) - Wireless connection between the motor and theradio receiver - Threshold adjustment directly on the device - Compatible with Blue Wave RX motors and TDS Gold (A510020), TDS Compact (A510038) and RX Mini (A510036) radio receivers TDS Gold TDS Compact Rx Mini Garda Ocean Micro Roll Wave Wire Wave RX Code Model Function A520007 WindTec Wind sensor A520008 WindTec Lux Wind and sun sensor A520010 WindTec SC Wind sensor A520011 WindTec SE Wind sensor A520010 WindTec SC anemometer Code Model Contents A540006 Kit Vento RX WindTec SC/TDS Gold/Skipper A540007 Kit Vento WindTec SC/TDS Silver WindTec Lux WindTec WindTec SC WindTec SE Power supply (V/Hz) 230/50 230/50 Radio frequency (MHz) 433,92 433,92 Wind sensor setting (km/h) 7,5-45 7,5-45 Sun sensor setting (klux) 2,5-100 Dimensions (mm) 300 140 95 Protection degree IP33 IP33 IP33 IP33 Weight (g) 365 365 300 300 - Wind sensor (WIRELESS) - Direct connections through 2 wires - Adjustment of the wind alarm threshold from the remote control - Compatible with radio receiver TDS Gold systems andcontrol unit TDS Silver. A520011 - Wind sensor (WIRELESS) - Direct connections through 2 wires - Adjustment of the wind alarm threshold from the remote control - Compatible with the Blue Garda RX motors TDS Gold A510020 TDS Silver A510021 WindTec SE anemometer Garda Ocean Micro Roll Wave Wire Garda Ocean Micro Roll Wave Wire Garda RX tubular control systems motors 94 CLIMATIC CONTROLS WINDTEC CLIMATIC CONTROLS WINDTEC 95

mistral vibration wind sensor A520012 The vibration wind sensor protects the awning by detecting its movement caused by the wind. Optional "Static Load Alarm" function: in case of an accumulation of a mass of water or snow on the awning, the sensor detects the increase in the awning inclination and intervenes by commanding its closure. Goccia Rain-sensor wired A520017 rain-sensor Compatible with the Wave RX motor series and with external radio receivers for awnings. Wireless: no wiring between the motor and the sensor. To be installed on the awning's terminal load bar. Small size operational diagram Power supply Maximum charge applicable on the relay Operating temperature Dimension (without cables) Weight 12V dc 1A -10 C +90 C 120 x 60 x 20 mm 200 g Rain-sensor for awnings. WHITE - 12 V SKY-BLUE - SENSOR SIGNAL YELLOW - COMMON The sensor detects the movement of the awning caused by the wind static load The awning closes Rugiada TX Radio Rain-sensor A520016 versions Code Model Function A520012 Mistral Wind sensor kg The sensor detects the by snow or water buildup changed inclination Δ > 2 The awning closes Power supply 2,4 V-3V DC Type of battery 2xLR03 (AAA) Transmission frequency 433,92 MHz Modulation AM/ASK Decoder system Rolling Code Irradiated RF power (ERP) 2 mw Operating temperature -10 ºC + 50 ºC Dimensions (mm) 140x38x26 mm Weight (g) 100 Power supply Power Transmission frequency Decoder system Modulation Radio operating range Control unit Operating temperature Weight Sensor element Operating temperature Dimension (without cables) Weight Plastic housing Protection degree Dimension (without cables) 230 Vac 2 W 433,92 MHz Rolling code AM/ASK 10-15 m -10 C +55 C 300 g -10 C +90 C 120 x 60 x 20 mm 200 g IP44 80 x 80 x 40 mm Rain-sensor wireless set on Cherubini Domotic transmitter. The rain alarm can be set according to the individual needs, on a UP or DOWN command of the awning. Easy setting by the remote control. operational diagram In case of rain, the sensor sends a signal, and according to the default setting, a UP or DOWN command is carried out. tubular control systems motors 96 MISTRAL RAIN-SENSOR 97

domotic RX receivers A510031 A510032 A510033 A510042 A510043 A510031 Power One The Power One and Duo domotic receivers enable the operation, using a Skipper series remote control, of any mains powered electrical appliance (e.g. lamps, heating or cooling units, etc.). Instead, the Duo BT receiver enables the control of low voltage inputs in control units and domotic automation systems, replacing or working along with the normal button or switch controls. The domotic receivers Power One 2C and 2M enables the control of powerful electrical equipment such as halogen lamps or infrared heaters. Also suitable for the control of specific devices, such as Power supplies for LED lights or fluorescent light tubes, etc. Power One Suitable for powering high wattage loads (e.g. heater elements). - Input for button or control switch. - Stable or timed output. 1 - Brown - Phase 2 - Blue - Neutral 3 - White - Wired switch (optional) 5 - Black - Output 1 6 - Black - Common A510031 Power One 2C - 2M A510042 - A510043 Automation/ Dimmer Control Unit Resistive load 2000 W max Skipper Series Skipper Series Remote control with 4 independent channels A530058 Remote control with 4 independent channels A530058 A510043 Connection diagram for wired switch (optional) Suitable for the control of electrical devices such as high-performance halogen lamps or infrared heaters. - Input for button or control switch. - Stable or timed output. M1 N PE N L1 L2 N PE M1 A510042 A510042 Power One 2C Button or Switch 1 - Phase 3 - Wired switch ON POWER N - BLUE neutral L1 - BROWN phase L2 - WHITE Wired switch (optional) PE - GREEN / YELLOW - Earth ON DEVICE N - BLUE neutral M1 - BROWN phase PE - GREEN / YELLOW - Earth M1 N L2 PE N L1 PE N M1 A510043 Power One 2M versions Code Model Function A510031 Power One Heating or cooling units A510042 Power One 2C High powered electrical devices - wired A510043 Power One 2M High powered electrical devices - with terminal board A510032 Duo Lighting systems A510033 Duo BT Domotic automation systems in low voltage Duo A510032 Suitable for running two independent loads, or else a diverted medium power load (e.g. lighting). - Input for button or control switch. - Stable or timed outputs. 1 - Brown - Phase 2 - Blue - Neutral 3 - White - Wired switch (optional) 4 - Green - Output 2 5 - Yellow - Output 1 6 - Red - Common Automation/ Dimmer Control Unit Resistive load 2x500W max Skipper Series Remote control with 4 independent channels A530058 A510032 Duo A510033 Duo BT A510031 Power One A510032 Duo A510033 Duo BT A510042 Power One 2C A510043 Power One 2M Power supply 220 Vac 220 Vac 12/24 V ac/dc 220 Vac Maximum load power 1000 W 2x500 W 2x500 W 2000 W halogen lamps and heaters 500 W LED and fluorescent lamps Operating temperature -10 C +50 C -10 C +50 C -10 C +50 C -10 C +50 C Dimensions 40x40x20 mm 120 x 35 x 20 mm Protection degree IP44 IP44 IP44 IP44 Radio frequency 433,92 MHz 433,92 MHz 433,92 MHz 433,92 MHz Duo BT A510033 Suitable for home automation systems and control units in low voltage. Suitable for running two independent loads, or else a diverted medium power load (e.g. lighting). - Input for button or control switch. - Stable or timed outputs. 1 - Brown - Power + 2 - Blue - Power - 3 - White - Wired switch (optional) 4 - Green - Output 2 5 - Yellow - Output 1 6 - Red - Common Automation/ Dimmer Control Unit Resistive load 2x500W max Skipper Series Remote control with 4 independent channels A530058 12-24 Vac/dc tubular control systems motors 98 DOMOTIC RX RECEIVER DOMOTIC RX RECEIVER 99

Bus Modules Command and centralization modules Centralised control via a bus Allows the central command of different range of motors. Allows individual and general operation of an installation using low-voltage signals transmitted over a bus cable. Versatile Compatible with the entire Cherubini motorisation series, both mechanical and electronic motors. Many applications Can also be used in mixed systems BLUE BUS / BLUE BUS RX: standard roller shutter, roller-venetian blinds, light sun protection systems,... BLUE BUS TDS / BLUE BUS TDS RX: awnings, standard blinds, light sun protection systems,... Several operating modes Simultaneous mode: After an order is transmitted from a central control, all actuators respond simultaneously. Sequential mode: The actuators respond in sequence to a command from the central control unit. Safety (BLUE BUS / BLUE BUS RX) The module has an input for security devices (fire alarms, intruder detectors, etc). Climatic control (BLUE BUS TDS / BLUE BUS TDS RX) The module includes inputs for the Cherubini devices: WindTec LUX and Mistral "wireless" to Blue Bus TDS RX, Wind-sensor, WindTec SC and rains-sensor wired to Blue Bus TDS. Optional connections Possibility of connecting an Up/Down button for local and centralised command. versions Code Model Function A510023 Blue Bus Bus module A510024 Blue Bus RX Bus module with built-in receiver A510025 Blue Bus TDS Bus module for Awnings A510026 Blue Bus TDS RX Bus module with inbuilt receiver for awnings Blue Bus Blue Bus TDS Blue Bus RX Blue Bus TDS RX Power supply 110 V - 230 Vac 110 V - 230 Vac Power 2 W 2 W Max. motor power 500 W 500 W Operating temperature -10 C + 55 C -10 C + 55 C Weight 300 g 300 g Dimensions 80x80x45 mm 80x80x45 mm Protection degree IP44 IP44 Radio frequency - 433,92 MHz Decoder system - Rolling Code Modulation - AM/ASK Storage capacity - 15 Main control External sensor panel input Example: security (fire alarm) Group button* Group button* Group button* Group button* Bus module Bus module Main control External sensor panel input Example: security (fire alarm) Bus module Bus module Type: Push-button toggle Programmable timer Domotic system etc. = Bus Bus Bus = module module module Blind Bus module Adjustable blind Single button* Single button* Type: Push-button toggle* Programmable timer Domotic system etc. Screens installation diagram Blind Single button* Blind Single button* Screens Single button* Single button* Adjustable blind Single button* Screens Single button* Awnings Single button* Awnings Single button* Awnings Single button* Screens Single button* Blind Single button* Bus module Screens Single button* Bus module = Bus Bus Bus = module module module Bus module Bus module Bus module Blind = Bus = Bus Single button* Bus module Bus module Bus module Bus module Screens Single button* BLUE BUS / BLUE BUS RX BLUE BUS TDS / BLUE BUS TDS RX tubular control systems motors 100 BUS MODULES *It is preferable to use a switch type unstable. BUS MODULES 101

- It gives the possibility of grouping 2 motors together and of activating them individually or together - Possibility of interconnecting modules example of sequential centralisation with Blue Bus and expansion modules Main control panel* expansion module Group button* Group button* Bus module Bus module A510008 Expansion module A510008 230V Expansion module A510008 230V Single button Single button Expansion module A510008 230V Expansion module A510008 230V Single button Single button Expansion module A510008 230V Expansion module A510008 230V Single button Single button - This interface allows to adapt the Cherubini radio systems to the house domotics control unit. - Compatible with all Cherubini radio systems: Blue Wave RX, Blue Tronic RX, Blue Garda RX motors, TDS Gold, TDS Compact, OPTime, Compact Roll, RX Mini, Tandem radio receivers. - The high-performance Rolling Code decoder system works with a limited bandwidth and therefore avoids interference. Power supply 230 Vac Power 1,5 W Transmission frequency 433,92 MHz Decoder system Rolling code Modulation AM/ASK Operating range in open spaces 150 m Operating temperature -10 C + 55 C Dimensions (excluding wiring) 40x40x20 mm Weight 80 g Domotic transmitter A530065 operating modes The domotic transmitter has two operating modes: - STANDARD MODE: Suitable for connection to a domotic control unit. Commands: Up: Contact between ON and "common" maintained more than 1 second. Down: Contact between AB and "common" maintained more than 1 second. Stop: No contact between UP / DOWN and "common". Slating mode (only for RX Tronic V32): Maintained contact between UP / DOWN and "common" more than 1 second. Remark: The mission of the signal takes place after contact than 1 second, is kept constant. - Advanced mode: For direct connection to the wall switch and similar un-blocked button. Commands: Up: Contact between ON and "common". Down: New contact between AB and "common". Stop: New Contact in the previous direction. Slating mode (only for RX Tronic V32): Quick contact between UP / DOWN and "common" not more than 0.5 seconds. Reminder for both modes: In the case of reception is impaired, is the mission of the signal is repeated at short time intervals three times. Single button Single button Single button wiring diagram for advanced mode Single button Single button Single button - DOMOTIC CONTROL UNIT - UP/DOWN SELECTOR example of centralisation with expansion modules Main control panel* Single button Single button Expansion module A510008 230V Single button Single button Expansion module A510008 230V 230Vac SKY-BLUE BROWN RED (COMMON) YELLOW (UPWARDS) GREEN (DOWNWARDS) TX DOMOTIC BLUE GARDA RX BLUE WAVE RX BLUE TRONIC RX BLUE TRONIC RX v32 THE DOMOTIC TRANSMITTER IS SET IN THE FACTORY TO WORK IN THE STANDARD MODE. tubular control systems motors 102 EXPANSION MODULE *For the Main control panel and the Bus module, it is preferable to use a switch type unstable. DOMOTIC REMOTECONTROL 103

TDS Compact radio receiver for awnings A510038 MINIradio receiver for awnings and rolling shutters A510036 Power supply 230 V / 50 Hz Max. motor power 600 W Storage capacity 15 remote controls Transmission frequency 433,92 MHz Operating temperature -10 C + 70 C Dimensions 120x35x20 mm Protection degree IP55 The new generation radio receiver that gives added performance to wired motors with mechanical or electronic limit switches. Specific functions: - Obstacle recognition during closing. - Closing force adjustment on 3 levels possible. - Function "Super-sensitivity" on obstacle detection, set by remote control, setting on 3 levels possible, especially for screens and mosquito blinds. - First middle position programmable from the remote control. - Second middle position programmable from the remote control and controlled by the WindTec Lux light sensor. - With cassette awnings, it is possible to set the limit switch at the stop. Optional connections: - Possibility to connect a switch type unstable. - Compatible with the WindTec and WindTec LUX climatic controls and with the vibration wind sensor MISTRAL. Power supply 230 V / 50 Hz Max. motor power 300 W Storage capacity 15 remote controls Transmission frequency 433,92 MHz Operating temperature -10 C + 55 C Dimensions 40x40x20 mm Protection degree IP44 The smallest radio receiver in the CHERUBINI line (40x40x20 mm). It can be inserted in a built-in socket. - Input up/down button. - Compatible with the WindTec and WindTec LUX climatic controls and with the vibration wind sensor MISTRAL. Power supply 230 V / 50 Hz Max. motor power 500 W Storage capacity 15 remote controls Transmission frequency 433,92 MHz Operating temperature -10 C + 55 C Dimensions 120x80x50 mm Protection degree IP55 TDS Gold radio receiver for awnings A510020 - Radio receiver for awnings. - Compatible with the WindTec, WindTec LUX and WindTec SC climatic controls and with the vibration wind sensor MISTRAL. - Possibility of connecting an up/ down button. - High-safety coding system Rolling Code. Power supply 230 V / 50 Hz Max. motor power 2x600 W Storage capacity 7 remote controls Transmission frequency 433,92 MHz Operating temperature -10 C + 55 C Dimensions 110x120x50 mm Protection degree IP54 Tandem radio receiver for awnings A510030 - Control of two motors for rolling shutters or awnings installed on the same wind-up roller. - Inputs for up/down buttons. - Inputs for anemometer and rain sensor. Power supply 230 V / 50 Hz Max. motor power 500 W Dimensions 120x80x50 mm Protection degree IP55 Operating temperature -10 C + 55 C TDS Silver control unit for awnings A510021 - Control unit for awnings. - Compatible with WindTec SC climatic sensor. - Possibility of connecting an up/ down button. tubular control systems motors 104 RADIO RECEIVERS FOR AWNINGS RADIO RECEIVERS FOR AWNINGS AND ROLLING SHUTTERS 105

radio receivers for rolling shutters OPTime radio receiver A510039 - A510040 A510039 A510040 Optime and Compact Roll: the new generation radio receivers that give added performance to wired motors with mechanical or electronic limit switches. Specific functions: - Obstacle recognition either upwards or downwards. - Closing force adjustment on 3 levels possible. - Function "Super-sensitivity" on obstacle detection, set by remote control, setting on 3 levels possible, especially for screens and mosquito blinds. - Two middle positions that are programmable and usable from the remote control. - With security devices it is possible to set the limit switch at the stop. Optional connections: - Possibility to connect a switch type unstable. Power supply 110 / 220 Vac Max. motor power 600 W Storage capacity 15 remote controls Transmission frequency 433,92 MHz Operating temperature -10 C + 70 C Dimensions 120x35x20 mm Protection degree IP55 ORIENS CRC radio receiver for venetian blind motors A510034 - A510035 Easy adjustment of slat inclination. EU and US mode controls and the innovative CHERUBINI mode that enables the slats to be adjusted and to quickly and intuitively raise and lower the blinds. Possibility of memorising a middle position and a Privacy position. Easy programming and operation: the motor confirms all the steps by means of small rotations. Versatile Fits to all Venetian blind motors with mechanical or electronic limit switch. Fits to all tilters with or without the third position system. Compatibility: Compatible with the Skipper remote controls. Compatible with WindTec climatic controls. Compact Roll radio receiver A510037 The Optime radio receiver is also available with quick couple connector for Roll Easy and Micro Easy motors. Optional connections: Input for double switch or for "up/down" control switch. A510034034 - Power supply cable with Hirschmann STAS 3 connector. - Motor cable with Hirschmann STAK 3 connector. OPTime A510039 A510040 Compact Roll A510037 Power supply 230 V / 50 Hz 230 V / 50 Hz Max. motor power 300 W 600 W Storage capacity 15 remote controls 15 remote controls Transmission frequency 433,92 MHz 433,92 MHz Operating temperature -10 C + 70 C -10 C + 70 C Dimensions 114x35x20 mm 120x35x20 mm Protection degree IP44 IP55 A510035035 - Standard 4 wire cable for power supply and motor. tubular control systems motors 106 RADIO RECEIVER FOR ROLLER SHUTTERS RADIO RECEIVER FOR VENETIAN BLIND MOTORS ORIENS CRC 107

timers electrical accessories Timer Roll A510027 - Timer with automatic, manual and holiday operational modes - Day/Time programming - Memorised positions: 2 (up/down). - Graphic icon display versions Code Description A510027 Timer A510028 Timer compatible with sensor* A510029 Timer with season function compatible with sensor* A520013 2 m sensor cable A520014 5 m sensor cable *the sensor must be ordered separately Power supply Operating temperature Operating time 230V/50Hz -5 0C +45 0C 2,5 min Timer Roll plus, compatible with sensor* A510028 - Timer with automatic, manual and holiday operational modes - Week/Time programming with connection to sensor - Memorised positions: 7 up, 7 down 2 sensor values. - May be connected to light sensors. - Graphic icon display Timer Roll plus Astro with season function, compatible with sensor* A510029 - Timer with automatic, automatic-seasonal, manual and holiday operational modes - Week/Time programming with connection to sensor - Memorised positions: 7 up, 7 down 2 sensor values. - May be connected to light sensors. - Graphic icon display A510019 "Comfort" signal repeater - It repeats the remote control signal - Ideal for critical environmental conditions - Direct power supply from a Shuko socket A530025 Programming cable Simple system to set the limit switches in motors with standard cabling. A510009 Multiple control relay - It gives the possibility of activating the motor from one or more buttons in the step-by-step mode A530064 Programming cable Simple system for programming motors with white wire with electronic limit switch setting. Timer - Cherumatic A510705 BROWN - ROTATION R1 BLACK - ROTATION R2 BLUE - NEUTRAL YELLOW - GREEN R1 R2 BROWN - PHASE WHITE - WIRED SWITCH BLUE - NEUTRAL YELLOW - GREEN versions Code Description A510705 Timer, compatible with Cherumatic sensor * A520702 Cherumatic sensor, cable 1,5m *the sensor must be ordered separately Power supply 230V/50Hz Operating temperature 0 C +45 C Operating time 2,5 min - Daily program - Holiday program / random presence simulation - Automatic change of season, summer / winter - Fast programming - Charge reserve: 72 hours - Dimensions: 50 x 50 mm (DIN 49075) - Illuminated display in 7 different colors A510700 Solexa - radio control unit for for awnings, Venetian blinds and roller screens - Sun, Wind and Rain sensor - Indoor temperature sensor to control shading - Outdoor temperature sensor - Possibility to set the preferred shading position. - The opening angle of Venetian blind slats can be set - Large, easy to read display - Because of its being radio controlled and battery powered the control unit can be installed wherever it is needed. - Weather station included Technical Control device type Power supply Dimensions Weight Operating temperature Protection degree Transmission frequency Weather station Power supply Dimensions Weight Operating temperature Protection degree Transmission frequency 2 x 1,5 V (2 batteries AA/Mignon/LR6) or 2 x 1,2 V (2 batteries, AA/Mignon/LR6) 103 98 28 mm 170 g (including batteries) 0 C +50 C IP40 868,2 MHz 230 V / 50 Hz 96 77 118 mm 260 g -30 C +60 C IP44 868,2 MHz tubular control systems motors 108 TIMERS ELECTRICAL ACCESSORIES 109

accessories adapters SERIES Ø35 p. 112 SERIES Ø45 p. 112 SERIES Ø58 p. 115 supports SERIES Ø35 p. 116 SERIES Ø45 - OCEAN p. 117 SERIES Ø45 - ALL MOTORS p. 118 SERIES Ø45 - OPTIME SYSTEM p. 120 SERIES Ø58 p. 121 other accessories ACCESSORIES FOR MANUAL OPERATION p. 122 SAFETY STOPS p. 123 accessories

Adapters - Series Ø35 Adapters - Series Ø45 40 40 Ogive 63 Ogive 70 Ogive 70 Octagonal Octagonal 40 8 0.6 0.8 A3505_0501 Adapters Octagonal 40 (External tube notch) Octagonal 40 8 0.6 0.8 A3505_0502 Adapters Octagonal 40 (Internal tube notch) 0,8 11 70 11 A4505_0525 Adapters RollerBat 63 A4505_0518 Adapters Oval 70 Selt A4505_0519 Adapters tube 70 reduced Ogive Ogive 70 Ogive 78 Round Round 40 Round 40 A3505_0503 Adapter Round 40 Thk 2 mm Round 40 Round 40 40 A3505_0506 Adapter 40 mm round th.1 mm 1 Ogives A4505_0520 Adapters Oval 70 Selt and RollerBat 70 Ogive 80 Ogive 85 A4505_0521 Adapters Ogive 78 A3505_0510 Adapter 40 mm round th.1,5 mm with tooth A3505_0511 Adapter Round 40 Thk 1.5 mm Others ZF 45 45 4 A3505_0504 Adapters ZF 45 Delfin 44 / Acmeda 44 44 A3505_0507 Adapters Delfin 44 and Acmeda 44 A4505_0523 Adapters RollerBat 80 7 Ø5 A4505_0513 Adapters Ogive 85 Round 50 Round 50 Round 50 Oval 42x46 46 42 A3505_0508 Adapters Oval 42x46 Benthin 52 52 A3505_0509 Adapters Benthin 52 Round 50 1,5 A4505_0514 Adapters round tube 50 Thoni A4505_0505 Adapters Round 50 Round 60 Round 70 A4505_0528 Adapter Delfin 50 reinforced A3505_0505 Ring adapter 35 mm - 45 mm Allows to use all adapters of series 45. N.B. All adapters of the series 45 fit on the output! A4505_0506 Adapters Round 60 A4505_0515 Adapters Round 70 tubular accessories motors 112 ADAPTERS - SERIES Ø35 ADAPTERS - SERIES Ø45 113

Adapters - Series Ø45 Adapters - Series Ø58 Octagonal 52 Octagonal 60 Ogive 78 Ogive 78 flat Ogive 85 Ogive 100 Octagonal A4505_0511 Adapters Octagonal 52 A4505_0510 Adapters Octagonal 60 Octagonal 70 Star-shaped 60 Ogives A5805_0502 Adapters Ogive 78 A5805_0513 Adapters Flat Ogive 78 A5805_0503 Adapters Ogive 85 A5805_0516 Adapters Ogive 100 Stobag Round 63 Round 70 Round 72 A4505_0502 Adapters Octagonal 70 A4505_0512 Adapters Star-shaped 60 Deprat 53 Deprat 62/Welser 63 Deprat 89 Deprat 53,7 26,5 Ø89 9,5 1 Round A5805_0509 Adapters Round 63 A5805_0508 Adapters Round 70 A5805_0514 Adapters Round 72 Gibus LS60 (Øe 72) Round 75 Round 98 Round 102 A4505_0508 Adapters Deprat 53 A4505_0507 Adapters tubo Deprat 62/Welser 63 A4505_0516 Adapters Deprat 89 ZF 54 ZF 64 ZF 80 80 A5805_0511 Adapters Round 75 Matest A5805_0510 Adapters Round 98 A5805_0507 Adapters Round 102 Octagonal 70 Octagonal 102 Octagonal 125 ZF A4505_0508 Adapters ZF 54 A4505_0509 Adapters ZF 64 5 11 A4505_0517 Adapters ZF 80 1 Octagonal A5805_0501 Adapters Octagonal 70 A5805_0506 Adapters Octagonal Welser tube 102 A5805_0512 Adapters Octagonal Heroal 125 Acmeda 60 Dalex 63 + 80 / Eurothema 60 / Gibus D58 / RollerBat 56 / Soprofen 53 + 54 ZF 80 RollerBat 80 Deprat 89 Others 60 A4505_0522 Adapters Acmeda 60 Dalex 80 Dalex 63 Eurothema 60 Gibus D58 RollerBat 56 Soprofen 53/54 A4505_0524 Drive pulley suitable for multiple profiles Others A5805_0504 Adapters ZF 80 A5805_0515 Adapter RollerBat 80 A5805_0505 Adapters Deprat 89 tubular accessories motors 114 ADAPTERS - SERIES Ø45 ADAPTERS - SERIES Ø58 115

3 7 Supports - Series Ø35 Roll Wave RX Tronic RX Plug&Play Plus all motor torques Ocean Supports - Series Ø45 up to 32 Nm 3 48 4 3 48 4 29 4 30 4 30 5 50 10 85 68 30 30 30 30 3 3 Ø 38 30 48 62 30 48 62 45 29 38 29 38 A3506_0551 10 mm square pin with omega bar, through holes A3506_0552 10 mm square pin with omega bar, M6 holes A3506_0557 RTPFL support plate 60 48 29 29 29 3 M5 3 Ø 21 30 30 85 100 60 60 30 10 Ø 6,3 A4506_0556 Flanged 10 mm square pin with omega bar, through holes A4506_0557 Flanged 10 mm square pin with omega bar, M6 holes M10 A4506_0558 Adjustable bracket with 10 mm square hole A4506_0561 Bracket with 10 mm square hole, with release 2,5 50 40 3 100 85 60 130 10 10,5 4 M6 66 118 A3506_0555 Flanged 10 mm square pin 38 A3506_0553 Fixing plate for side covers A3506_0558 Plate DCRX 8 2,5 20 60 A4506_0562 Adjustable bracket with 10 mm square hole, with release 10,5 Ø 6,5 A4506_0572 Bracket with 10 mm square hole, without release A4506_0573 Adjustable bracket with 10 mm square hole, without release 8 10 30 3 A4506_0580 10 mm square pin with M6 screw 29 3 4 38 29 30 3 29 38 3 17,5 170 48 9 130 10 Ø 25 all motor torques 4 100 100 4 M6 86 M5 Ø 99 A3506_0556 Plate A3506_0560 Flange with bolt square 10 short A3506_0561 Flange with bolt square 10 - butterfly shape 70 85 5 Ø 5,2 M10 86 A4506_0559 "Vercelli"support plate A4506_0568 Plate 100x100 A4506_0571 Adjustable bracket for Ocean A4506_0584 Fastening sliding ring ø6 ø28 ø65 A3506_0554 Motor head adapter 35 mm - 45 mm Allows to use all brackets of series 45 48 9014 Flange ø6,4 A4506_0585 Head adapter for Ocean, for fastening with fast coupling bracket A4506_0555 tubular accessories motors 116 SUPPORTS - SERIES Ø35 117 SUPPORTS - SERIES Ø45

48 Roll Easy - Micro - Micro Easy / Plug & Play - Plug & Play Short - Plug & Play Short RX Roll - Garda - Garda RX / Plug & Play Plus - Wave Wire / Wave RX - Tronic RX - Tronic RX V32 Roll Easy Micro Micro Easy / Plug&Play Plug&Play Short Plug&Play Short RX Roll - Garda Garda RX / Plug&Play Plus Wave Wire / Wave RX Tronic RX Tronic RX V32 85 100 94,5 148,8 19,25 19,25 9 10 UP TO 25 NM 108,5 74 44-48 A4506_0574 Snap-on bracket "Click OPTime" 108,5 115 168,3 A4506_0593 Plastival slide (long version) A4506_0581 Bracket 100 100 ZF - Croci - Veka 100 71 A4506_0595 SLO support plate 71 Ø 5,5 85 1,2 Ø 5,5 Ø 5,5 A4506_0592 Plastival slide (short version) 68 54 A4506_0554 Fast coupling bracket with spring split pins M10 A4506_0570 Adjustable snap-on bracket 73 68 54 A4506_0555 Universal support with fast coupling 26 2 48 130 170 90 100 A4506_0587 Snap-on bracket with holder "Demi linteau" 60 8 R100 2 Ø 4,2 A4506_0559 "Vercelli"support plate Ø4,1 A4506_0588 Bracket "Bloc-Baie" 7 ø6 85 76 70 ø28 2 5 48 76 ALL MOTOR TORQUES ALL MOTOR TORQUES ALL MOTOR TORQUES UP TO 32 NM M10 5 45 A4506_0558 Adjustable bracket with 10 mm square hole 3 10,5 100 85 50 10 30 Ø 6,5 A4506_0572 Bracket with 10 mm square hole, without release 44-48 A4506_0589 Snap-on bracket 90 44 60 60 100 85 10 A4506_0561 Bracket with 10 mm square hole, with release 10,5 8 85 68 40 4 66 118 A4506_0573 Adjustable bracket with 10 mm square hole, without release 44 68,8 60 38 A4506_0591 Steel plate & snap-on bracket 8,8 3 6,4 28,5 Ø 6,3 2,5 130 10 8 A4506_0562 Adjustable bracket with 10 mm square hole, with release Ø 96 A4506_0586 Bracket for Coffrelite end cap 50 2,5 20 60 Ø 20 6, 2 4 11 A4506_0598 CH- Standard support 73 x 73mm A4506_0599 CH- Cassette-support 3 slot Roll Easy Micro Micro Easy / Plug&Play Plug&Play Short Plug&Play Short RX: all motor torques Tronic RX - Tronic RX V32: up to 25 Nm / Roll: up to 30 Nm / Plug & Play Plus: up to 32 Nm 30 3 60 62 48 30 4 A4506_0566 Flanged 10 mm square pin with omega bar, through holes 3 Garda Garda RX / Wave RX / Wave Wire: up to 32 Nm Tronic RX Tronic RX V32: only 32 Nm 3 30 60 4 30 48 62 A4506_0556 Flanged 10 mm square pin with omega bar, through holes 30 60 62 48 30 4 A4506_0567 Flanged 10 mm square pin with omega bar, M6 holes 3 30 60 30 4 30 48 62 A4506_0557 Flanged 10 mm square pin with omega bar, M6 holes Ø20 68 100 ø6,4 ø65 9014 Flange (Blue Roll: up to 30 Nm) A4506_0569 Flanged 10 mm square pin M6 60 10 60 30 3 A4506_0580 10 mm square pin with M6 screw 10 3 30 4 10 60 48 30 3 A4506_0597 Flange with bolt square 10 short Ø 25 ALL MOTOR TORQUES A4506_0568 Plate 100x100 4 Ø 5,2 tubular accessories motors 118 SUPPORTS - SERIES Ø45 SUPPORTS - SERIES Ø45 119

Supports - Series Ø45 for all motors SYSTEM Less time required for assembly Thanks to its design, this kit makes a quick and easy fastening to the aluminium end cap possible. Fastening without screws This kit makes the fastening to the end cap possible without using screws. Aesthetics This kit improves the aesthetics of the finished product. Possibility of setting in all directions Reduced assembly costs Quick fastening and the less effort needed save time. Possibility of automation It is possible to insert radio receivers in the end capage Tubular motors for awnings: Wave RX - Garda Supports - Series Ø58 Fastening without brackets The motor head is made from high-performance metal and allows direct fastening to the awning brackets. The M6 threaded holes with a centre-to-centre distance of 48 mm give the possibility of adapting to any type of bracketcommonly available on the market and facilitate the installation and assembly of the motor under any conditions. Tubular motors for awnings: Wave RX - Garda - Standard fastening Tubular motors for rolling shutters: Tronic RX - Garda 19,25 4 48 Ø 25 examples of installation 68 54 Ø 5,2 70 possibility of automation Examples of installation and advantages The Optime fastening system is versatile and can therefore be adapted to every kind of end cap, in any position and in any situation. This means that it is compatible with almost all end cap systems present on the market. A4506_0554 Fast coupling bracket with spring split pins A4506_0568 Plate 100x100 50 A5806_0555 Kit square pin 16 The Optime fastening system is small and compact. It is therefore possible to insert a radio receiver in its end capage. CHERUBINI RECOMMENDS TO AUTOMATE THESYSTEM USING AN OPTIME CRC RECEIVER. Possibility of adjustment in all positions The Optime fastening systems allows you to place thelimit switch mechanism in the most suitable position foreach individual installations. 6 5 The OPTime CRC receiver has been specifically developed to complete the OPTime series. It is compatible with all Skipper series remote controls and provided with an inlet for a step-by-step button. ASSEMBLY SYSTEM COMPATIBLE WITH ALL CHERUBINI MOTORS UP TO 25 Nm A5806_0551 Square pin 16 with omega bar M12 Motor with override: Ocean A5806_0558 Adjustable bracket with 16 mm square hole (up to 85 Nm) 50 Code Description A4506_0574 Snap-on bracket "Click OPTime" A4506_0803 OPTime fastening kit 130 A4506_0575 OPTime fastening kit 137 A4506_0788 OPTime fastening kit 140 A4506_0576 OPTime fastening kit 150 A4506_0577 OPTime fastening kit 165 A4506_0789 OPTime fastening kit 170 A4506_0578 OPTime fastening kit 180 A4506_0579 OPTime fastening kit 205 Ø 25 A4506_0568 Plate 100x100 4 Ø 5,2 Ø 6,5 60 48 Ø 70 A5806_0552 Square pin 16 with omega bar for override 6 M12 A5806_0558 Adjustable bracket with 16 mm square hole (up to 85 Nm) 5 tubular accessories motors 120 SUPPORTS - SERIES Ø45 - OPTIME SYSTEM SUPPORTS - SERIES Ø58 121

accessories for manual operation Safety stops 800 Series Clip on safety stops for tubes ZF Ø54 and DEPRAT Ø53 1 mesh (also available in versions with 2 or 3 meshes) 140 812-1 mesh 140 813-2 meshes 140 814-3 meshes 600 Series Screw down safety stops for 60 octagonal tube 1 mesh (also available in versions with 2 or 3 meshes) 140 612 2T60-1 mesh 140 613 2T60-2 meshes 140 614 2T60-3 meshes 500 Series Screw down safety stops 50 mm centre-to-centre distance For tubes ZF Ø 64 and DEPRAT Ø 62 140 512 2T50-1 mesh 140 513 2T50-2 meshes 140 514 2T50-3 meshes 60 mm centre-to-centre distance For 40 and 60 octagonal tube Ref. 9100 150L CH02 Operating crank length 150 cm Ref. 7463 150G 2101 Foldable crank with hook length 150 cm Ref. 7705 7030 OCNK Outlet 55, plate in nickel plated Zama, witheye 140 512 2T60-1 mesh 140 513 2T60-2 meshes 140 514 2T60-3 meshes For Ocean series motors Ref. 8026 70 Ref. 1498 7016 Ref. 8056 V13 Ref. 8056 M12 A4516_5746 Safety stop 2 meshes A4516_5747 Safety stop 3 meshes Ref. 7721 7040 OC16 Return at 60, fast coupling with eye Ref. 7840 7033 OCNK (nickel plated) Ref. 7840 7043 OC16 (Ral 9016) Return at 90, fast coupling with eye main characteristics Magnetic joint with or without plate A4516_5748 Safety stop ring Octagonal 60 A4516_5749 Safety stop ring Octagonal 70 Ref. 6010 7008 CH16 Eye with hexagon 7 86 mm Ref. 6010 7012 CH16 Eye with hexagon 7 120 mm Ref. 6010 7018 CH16 Eye with hexagon 7 180 mm tubular accessories motors 122 ACCESSORIES FOR MANUAL OPERATION SAFETY STOPS 123

general sales terms and conditions warranty 1) Orders - All orders will only be accepted according to the following conditions. We will confirm your order in writing by our Order Confirmation. It is the customer's responsibility to check the order confirmation. Any differences in specification or terms shown on the order confirmation must be notified to Cherubini within 5 days of the date of the order confirmation, otherwise the customer has to accept the goods as shown on the order confirmation. 2) Prices - Our price list shows only indicative prices. If any extraordinary or unexpected circumstances change the conditions stated at the moment of the contract the company has the right to change prices with a prior notice. Any price negotiations, conducted by agents or sub-agents, require the authorisation of Cherubini before these prices can become operable. 3) Delivery - Goods are shipped at the buyer's risk, even if these parts are being shipped for a free delivery shipment. 4) Payments - Cherubini retains the ownership of the goods until all payments have been made for them. The payment of the amount of the invoice must be paid within the terms and conditions indicated on the invoice. Failure to make payments in accordance with these terms and conditions may incur the imposition of a 3% penalty interest rate higher than the official discount rate of the moment. 5) Deliveries - Deliveries will be made in accordance with our normal trading terms and conditions. However, should any unforeseen circumstance arise which precludes a delivery being made, the customer will have no rights to seek compensation of any kind from Cherubini. 6) Claims - The goods will be considered completely accepted by the customers after 8 days from their receiving. All claims must be in writing and sent to Cherubini by registered letter within eight days of the customer receiving the goods. In case of goods subject to a manufacturing defect, such goods will be replaced ex works as quickly as possible. No claims will be allowed for direct or consequential loss arising from damage caused by the operation of our products. All replacement of product will be authorised and carried out only by Cherubini. Any delay in payment by the buyer will nullify all sales agreements. CHERUBINI GUARANTEES ITS MOTORS AND RELATED ACCESSORIES TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL AND PROPER USE, AT THE FOLLOWING CONDITIONS: PERIOD Cherubini warrants its tubular motors for a period of five (5) years. The electrical and electronic accessories (including the control systems) have a two (2) year warranty. All warranties start from the date of manufacturing. WARRANTY APPLICATION Cherubini has an obligation under the terms of this warranty to repair or replace any parts found to be defective as quickly as possible. Cherubini shall retain any parts replaced under warranty. The buyer is responsible for all freight costs associated with the repair, or replacement of the parts, without any obligation of assistance on the spot by Cherubini. WARRANTY LIMITATIONS The following will render the warranty null and void: - If the product has been opened or dismantled, or there are clear signs the product has been subject to abuse or other damage. - If the buyer has selected a product which is not in accordance with our written product specifications. - If the buyer or his agent has not followed the written installation and wiring instructions issued by Cherubini. - If our products are used in a manner for which they were not designed or they are used with accessories which have not previously been approved in writing by the Technical Department of Cherubini. - If any of the electrical accessories or controls have not been wired or installed in the manner depicted in our installation instructions. PRODUCT USE LIMITATIONS Cherubini has designed the range of products for use in operating awnings, shutters or screens for sun protection, provided they are not in continuous use. These products must be installed according to IEC Standards or any other rule in force at the moment of their installation or planning. 124 7) Controversy - All disputes arising from any matter resulting from the supply of product to a customer will only be settled by the Law Court of Brescia, Italy. GENERAL SALES TERMS AND CONDITIONS The products and details shown in this catalogue are for information only, and may be changed at any time, without notice. WARRANTY 125 general sales terms and conditions - warranty

Cherubini S.p.A. Via Adige, 55-25081 Bedizzole (BS) - Italy Tel. +39 030 6872 039 - Fax +39 030 6872 040 info@cherubini.it www.cherubini.it Cherubini Iberia S.L. Avda. Unión Europea 11-H - Apdo. 283 Polg. Ind. El Castillo - 03630 Sax - Alicante - Spain Tel. +34 (0) 966 967 504 - Fax +34 (0) 966 967 505 info@cherubini.es www.cherubini.es Cherubini France S.a.r.l. ZI du Mas Barbet 165 Impasse Ampère - 30600 Vauvert - France Tél. +33 (0) 466 77 88 58 - Fax +33 (0) 466 77 92 32 info@cherubini.fr www.cherubini.fr Cherubini Deutschland GmbH Siemensstrasse 40-53121 Bonn - Deutschland Tel. +49 (0) 228 962976 34/35 Fax +49 (0) 228 962976 36 info@cherubini-group.de www.cherubini-group.de Sales Germany: Udo Ebner Tel. +49 (0) 7143 872 359 - Fax +49 (0) 7143 872 363 udo.ebner@cherubini.it Sales Switzerland: Aldo Fasciati Mobil +41 (0) 79 715 34 76 aldo.fasciati@cherubini.it Sales Czech Republic and Slovakia: Roman Krämer Mobil +420 777 272 127 roman.kraemer@cherubini.it