Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123
Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and Quiet Operation Optional Inlet/Outlet Locations for Ease of Installation Replaceable Bronze Port Plate Replaceable Piston Slipper Plate Low Noise Levels - Promote More Comfortable Operating Environment Fast Response Times Metric Pilot, Shaft, and Ports vailable Controls Pressure Compensation Remote Pressure Compensation Load Sensing Torque (Horsepower) Limiting djustable Maximum Volume Stop Low Pressure Standby Schematic Symbol (Basic Pump) Special Installation or Fluids Consult your Parker representative on applications requiring higher than rated pressure, over-speed conditions, indirect drive, fluids other than mineral base fluid, and operation at temperatures above 1 F (71 C). Specifications Pressure Ratings Outlet Port: 5 PSI (345 bar) Continuous (P1) 55 PSI (38 bar) Peak (P3) Inlet Port: 25 PSI (1.72 bar) Maximum 5 In. Hg. Minimum @ 18 RPM (See inlet chart for other speeds.) Case Drain: 5 PSI Maximum Differential over Inlet Port. 15 PSI Maximum Speed Ratings: to 3 RPM Operating Temperature Range: 4 F to 1 F ( 4 C to 71 C) Housing Material: Cast-Iron Filtration: Maintain SE Class 4, ISO 1/13, ISO 18/15 Maximum Mounting: SE 2-Bolt or Metric Installation Data: See Installation Information on page 11 of Catalog 2-12-1/US for specific recommendations pertaining to system cleanliness, fluids, start-up, inlet conditions, shaft alignment, drain line restrictions and other important factors relative to the proper installation and use of these pumps. Pump Model Displacement cc/rev (In 3 /rev) Quick Reference Data Chart Pump Delivery *pprox. Noise Levels db() @ 4 PSI (28 bar) @ Full Flow 18 RPM (12 RPM) Horsepower t in GPM (LPM) 18 RPM, Max. 5 PSI 1 PSI 2 PSI 3 PSI 4 PSI 5 PSI Displacement & 12 RPM 18 RPM (34 bar) (9 bar) (138 bar) (27 bar) (275 bar) (345 bar) 5 PSI PHP1 1 (.) 3. (11.4) 4.8 (18.2) 4 () 4 () (2) 7 (3) 8 (4) 7 () 15 * Since many variables such as mounting, tank style, plant layout, etc., effect noise levels, it cannot be assumed that the above readings will be equal to those in the field. The above values are for guidance in selecting the proper pump. Noise levels are -weighted, mean sound pressure levels at 1 meter from the pump, measured and recorded in accordance with applicable ISO and NFP standards. 124
Catalog HY13-1553-1/N,EU Series PHP1 Dimensions - Rear Ported Pump.188 (4.) SQURE KEY.833 (21.2) ø.82 (21.).75 (19.1) ø.749 (19.) 3.71 (94.2) 3.11 (79.9) SHFT OPTION OMIT (MX TORQUE = 13 IN LBS) 2.9 1.74 (44.2) 2.9 3.2 (91.9) SHFT OPTION B (SE ) 9T 1/32 DP 3 INVOLUTE SPLINE ROTTION RROW 4.25 (17.9) SHFT OPTION C 11 T 1/32 DP 3 INVOLUTE SPLINE (MX TORQUE = 99 IN LBS) 1.5 (39.) DRIN PORT SE- STRIGHT THRED O-RING PORT (9/1-18 UNF-2B) NMEPLTE 3.25 (82.5) ø3.248 (82.4) 2.42 (1.4) CLERNCE FOR 3/8" MOUNTING BOLTS 2.2 (.5) 1.2 (32.) Front View 2.2 (.5) 1.2 (32.) LTERNTE DRIN PORT OR CSE PRE-FILL PORT SE- STRIGHT THRED O-RING PORT (9/1-18UNF-2B) Top View.88 (174.8).5 (12.7) 2.72 (9.1).24 (.1) 1.75 (43.2).89 (22.) REF. SHFT OPTION OMIT Shown / SE Pilot 3.32 (84.3) 2.28 (57.9) COMPENSTED PRESSURE DJUSTMENT 8 PSI/TURN INLET PORT SE-12 STRIGHT THRED O-RING PORT (1-1/1-12 UN-2B REF.) Rear View OUTLET PORT SE-12 STRIGHT THRED O-RING PORT (1-1/1-12 UN-2B REF.).25 FLT (.4) 7.8 MX. (199.).81 (172.9) Side View Note: Right Hand (CW) rotation, rear ported pump shown. Counter Clockwise (CCW) pumps will have inlet and outlet ports reversed with compensator on outlet side. DJ. MX.VOLUME STOP (1. CC/REV/TURN) (OPTION 2) 125
Catalog HY13-1553-1/N,EU Series PHP1 Dimensions - Side Ported Pump.188 (4.) SQURE KEY.833 (21.2) ø.82 (21.).75 (19.1) ø.749 (19.) Port Size, Type, and Location Option Inlet and Outlet Ports Drain Port 3/4" SE 4-Bolt Flange 2 High PSI Series ( 2) 3/8-1 Thread 3/4" SE 4-Bolt Flange 8 High PSI Series ( 2) M1 X 1.5 Thread SE- STR THRD (9/1-18 UNC) ISO 149- M1 X 1.5 SHFT OPTION OMIT (MX TORQUE = 13 IN LBS) SHFT OPTION B (SE ) 9T 1/32 DP 3 INVOLUTE SPLINE SHFT OPTION C 11 T 1/32 DP 3 INVOLUTE SPLINE (MX TORQUE = 99 IN LBS) 3.71 (94.2) 3.11 (79.9) 2.9 1.74 (44.2) 2.9 3.2 (91.9) ROTTION RROW 4.25 (17.9) 1.5 (39.) CSE DRIN PORT SEE TBLE FOR SIZE NMEPLTE 3.25 (82.5) ø3.248 (82.4) 2.42 (1.4) CLERNCE FOR 3/8" MOUNTING BOLTS 2. (7.) Front View 2. (7.) LTERNTE DRIN PORT OR CSE PRE-FILL PORT SEE TBLE FOR SIZE Top View.88 (174.8).5 (12.7) 2.72 (9.1).24 (.1) 1.75 (43.2).89 (22.) REF. SHFT OPTION OMIT Shown / SE Pilot 3.32 (84.3) 2.28 (57.9) COMPENSTED PRESSURE DJUSTMENT 8 PSI/TURN INLET PORT (SEE TBLE FOR PORT SIZE) Rear View.25 FLT (.4) OUTLET PORT (SEE TBLE FOR PORT SIZE) 8.27 MX. (21.1) 5.8 (148.8) Side View Note: Right Hand (CW) rotation, side ported pump shown. Counter Clockwise (CCW) pumps will have inlet and outlet ports reversed with compensator on outlet side. DJ. MX.VOLUME STOP (1. CC/REV/TURN) (OPTION 2) 12
Catalog HY13-1553-1/N,EU Series PHP1 Efficiency - % 1 9 8 7 Outlet Flow GPM (LPM) 4. (15.1) 3. (11.4) 2. (7.) 1. (3.8) PHP1 @ 12 RPM Volumetric Efficiency Overall Efficiency Flow/ GPM 1 Input Horsepower at Full Flow 2 3 (27) Compensated Horsepower 4 1 9 8 7 5 4 3 2 1 5 Horsepower HP Efficiency - % 1 9 8 7 5 Outlet Flow GPM (LPM) 4. (15.1) 3. (11.4) 2. (7.) 1. (3.8) PHP1 @ 15 RPM Volumetric Efficiency Flow/ GPM 1 Overall Efficiency Input Horsepower at Full Flow 2 3 (27) 4 Compensated Horsepower 15 12 9 3 5 Horsepower HP Note: Compensated horsepower curves are shown for the standard pressure compensator option. For remote type compensators the compensated horsepowers will be 1-15% higher. Note: The efficiencies and data in the graphs are accurate for pumps running at speeds shown and maximum stroke. To calculate approximate horsepower for other conditions, use the following formula... HP = [ Q x (PSI) + Compensated HP 1714 ] Efficiency - % 1 9 8 7 Outlet Flow GPM (LPM) 4.5 (17.) 3. (11.4) 1.5 (5.7) PHP1 @ 18 RPM Volumetric Efficiency Flow/ GPM 1 Overall Efficiency Input Horsepower at Full Flow 2 3 (27) 4 Compensated Horsepower 15 12 9 3 5 Horsepower HP Inlet Pressure Vacuum (In Hg) PSI PHP1 - Inlet Characteristics 4 2 5 1 15 2 (Graph only valid at sea level) Recommended Operating Condition DO NOT OPERTE IN THIS REGION 5 1 15 2 25 3 Shaft Speed - RPM Drain Flow GPM Nominal Case Drain Flow 18 RPM 1..8..4.2 Remote Comp. Zero Stroke Std. Comp. Zero Stroke 1 2 Full Flow 3 (27) 4 5 127
Catalog HY13-1553-1/N,EU Ordering Information Series PHP1 PHP 1 Multiple Pump Series Pressure Shaft Port Rotation Volume Control Seals Paint Pumps Variable & Size Range Location Stop Option Piston Option Pressure Range Rotation * 5 35-5 PSI* *Minimum value of pressure range only applies on control option omit code. R CW L CCW * s viewed from shaft end. P Paint Option Not Painted Painted Maximum Displacement CC s/rev. (Cu.In s/rev.) 1 1 (.) Multiple Pumps Single Pump Factory Mounted To Rear Of nother Pump Vol. Stop Option No Volume Stop 2 dj. Max. Vol. Stop V Nitrile Seals Fluoroelastomers* * FLUOROELSTOMERS are available under various registered trademarks, including VITON (a registered trademark of DuPont) and FLUOREL (a registered trademark of 3M). Shaft Pilot 3/4" Keyed x 1.75" Lg. SE B SE 9-Tooth Spline SE C 11-Tooth Spline SE K* 18mm Keyed Metric * vailable with 8 port option only. Port Location Port Type Rear Straight Thread SE 2 Side Flange (Inch Thds.) SE 8 Side Flange (Metric Thds.) ISO 149 **M **ME Control Options Press. Compensated Remote Pressure (Int.) Remote Pressure (Ext.) Pressure and Flow C* PSI, Flow and HP Limiting H* Pressure Compensated and HP Limiting *Specify RPM, HP and Compensator or will be set to default. ** "M" (May be remotely controlled) "ME" (Requires external pilot) 128