GENESIS ROTOBLAST Unrivaled Performance. Reduced Costs. Reversible 8 Vane Wheel for all Surface Preparation Applications Your Global Resource for Shot Blasting Equipment
GENESIS ROTOBLAST Genesis Rotoblast a world of applications Supported by more than 100 years of cleaning experience, the Genesis family of blast wheels deliver unrivaled performance due to its unequaled abrasive distribution across the work surface resulting in shorter cleaning times. Our patent pending designs simplify the maintenance process and allow better access to internal wear components. The rapid release dual tapered vanes virtually eliminate shot locking. Tight tolerances and Pangborn s proprietary metallurgy consistently increase the longevity of the wear parts.
The Genesis family of wheels offers a variety of vane sizes, speeds and configurations to meet your exact needs: 2.5" Wide Wheels Ranging in diameter from 13" to 26.5", these narrow vane wheels provide optimum coverage where control of the abrasive stream is important. 4" Wide Wheels Ranging in diameter from 14" to 26.5", these Genesis wheels are available in low or high speed to allow optimum coverage in a variety of applications. Wheel Conversion Kits Available in 2.5" or 3.5", these kits allow for improved component life and ease of maintenance in a variety of other brands of wheels. Key Features and Benefits n Improved abrasive flow for faster cleaning cycles n Direct mounted motors or spindles eliminate manual wheel alignment issues n Easy front of housing access to runnerhead n Optional replaceable, long-lasting P-41 cast liners n Integrated dual labyrinth hub seal for superior abrasive containment n T-nuts assist in housing replacement n Integral U-shaped feed spout clamp for improved adjustment and assembly n 2.5", 4" and 5.5" vane width options n Low speed and high speed direct drive motors n Direct coupled spindle drives allow for re-use of existing motors n Both single-sided and dual-sided runnerheads available n PATTERN-LOC system maintains blast pattern settings when changing feed parts n Less part wear due to greater concentricity and more precise alignment Integrated U-shaped feed spout lock PATTERN-LOC
Hinged lid with safety lock. Lid, liner and gasket bolted together for safety and easy access. Easy front access to runnerhead Dual labyrinth rear hub seal Elimination of the taper lock Dynamic runnerhead balancing Interchangeable end liners Patent pending dual taper blade design Optional replaceable P-41 cast liners Single Runnerhead Double Runnerhead Wheel Model 2.5G1 2.5G1 (Low Speed) 4G1 5.5G1 (Low Speed) 2.5G2 4G2 Spindle 4G2 4G2 (Low Speed) Vane Width 2.5" 2.5" 4" 5.5" 2.5" 4" 4" 4" Wheel Diameter 13", 14", 15", 16", 17" 24", 26.5" 14", 15", 16", 17" 24" 15" 18" curved 14", 15", 16", 17" 24", 26.5" Horsepower 10 50 15 50 25 75 40 100 10 50 25 75 25 75 25 75 RPM 3600 1800 3600 1800 3600 Varies 3600 1800 Hertz* 60 60 60 60 60 60 60 60 *50 Hertz Available. Ask about our 3.5" Wheel Conversion Kits. Ask about our Genesis Spindle Driven units.
Genesis wheels are rapidly gaining acceptance by industries around the world for a variety of applications. From the harsh conditions within foundries, the high output requirements of automotive industries or the exacting tolerances of peening specifications, Genesis wheels are proving that they are not only one of the most technologically advanced wheels on the market they are also some of the most versatile. Genesis Spindle Driven Key Features and Benefits Spindle Drives are now available for the Genesis Wheels Variable speeds allow for increased flexibility Wheels can be upgraded to Genesis technology without replacing motors
Your Global Resource for Shot Blasting Equipment Pangborn Group designs, manufactures and services both wheel and air blast systems worldwide. We also offer complete turnkey solutions for shot peening and many other specialty blast systems for a range of industries. With roots dating back to 1873, Pangborn Group is a leader in the surface preparation industry with unique designs, heavy-duty applications, and best-inclass service and support. For more information about Pangborn Group, visit www.pangborngroup.com. Pangborn Group 4630 Coates Drive Fairburn, GA 30213 Toll Free: 800.638.3000 Phone: 404.665.5700 Fax: 404.665.5701 www.pangborngroup.com Genesis Rotoblast G1/G2-PAN01