Product Information Stepper Motor-driven Diaphragm Dosing Pump Reliable dosing of chemicals Stepper motor driven diaphragm pumps are particularly suitable for highly accurate, reproducible industrial dosing thanks to their design. Many fluid media can be safely fed into the respective processes using these pumps. Precision that inspires The series is available in four capacity ranges that deliver between 5 and 20 l/h against pressures of up to 16 bar. The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven diaphragm dosing pump. Several different materials and connections are available for suction and discharge side, depending on the specific applications. By using appropriate and recommended materials, the can be used in most process applications. A matching accessory set with hoses, injection points and suction lines from out comprehensive accessory range means that nothing stands in the way of a quick installation, and you get the best results. Wide range of applications The 's drive is fully adjustable. The stepper-motor with its wear-free tooth belt drive, ensures a particularly homogeneous and gentle dosing process. This produces an almost constant supply stream, which gives a low-pulsation dosing. In addition, the gives you the possibility to reduce the suction speed in two steps to easily and more precisely supply even viscous dosing media. The doesn't just impress with its elegant design; the graphical display with a multi-language menu as well as the dosing pump's operation using the integrated keyboard simplifies its use. If required, the dosing pump can be controlled via an analogue or pulse input. For integration into demanding automation networks, a version with an Ethernet-based MODBUS interface is available. Using position detection in the pump, after an unexpected shut down of the pump, overdosing can be prevented and downtime resulting from this can be excluded. In Short Capacity range 5 to 20 l/h, up to 16 bar Broad-range power supply 110-240 V AC, -10% / +5%, 50/60 Hz, IP 65, 25 W Suitable for aggressive media Graphical display with multi-language menu Materials available: PVC, PP, PVDF and stainless steel Material consistency for the pumps and accessories Dosing head ventilation (plastic version) Supplied with connection sets (except stainless steel) Wall and floor mounting Double-ball valves ensure accurate dosing Precise pump settings using the keyboard Fully controllable stepper-motor drive Asynchronous mode for settings < 100% Infinitely adjustable stroke frequency from 0 to 100% Calibration function Two slow-mode settings for highly-viscous media Delivery rate displayed on various units Automatic diaphragm change program External control via standard signal 0/4 20 ma External control with pulse increase and reduction Level input with early warning and main alarm Release input Dosing control input Diaphragm rupture input Stroke feedback output Alarm relay output Batch dosing with interval and timer functions Ethernet interface (optional) Dosing Conveying Control Liquids Gases Systems
Model variants MEMDOS SMART Material PVC PP PVDF Stainless steel LP 5 10101004 10101000 10101008 10101012 LP 10 10101005 10101001 10101009 10101013 LP 15 10101006 10101002 10101010 10101014 LP 20 10101007 10101003 10101011 10101015 Technical data 5 10 15 20 Delivery capacity at max. pressure l/h 5.3 10.8 14.2 19.2 Max. supply pressure bar 15 9 5 4 Delivery capacity at medium pressure l/h 6.0 11.3 14.7 19.7 Average back pressure bar 8 5 3 2 Max. stroke frequency RPM 150 Suction head for non-gassing media mws 3 Max. inlet pressure mbar 800 Nominal valve width Voltage supply DN4 110-240 V AC, -10% / +5%, 50/60 Hz Power consumption W 25 Protection class Insulation class Weight IP 65 (with covering caps on the connections) PVC, PP, PVDF ~ 2.2 kg 1.4571 ~ 3.3 Max. ambient temperature C 5-45 (5-40 with PVC parts) Max. temperature of the medium C 80 (with PVC parts 35; with PP parts 60) Delivery characteristic curves The delivery characteristic curves are valid for 20 C (68 F) for water at 100% stroke frequency. The delivery capacity depends on the medium (density and viscosity) and temperature. Dosing pumps must therefore be gauged in litres during application. F Delivery capacity [l/h] 25,0 20,0 LP 20 LP 15 15,0 LP 10 10,0 LP 5 5,0 0,0 0 2 4 6 8 10 12 14 16 5-20 Pressure [bar]
Dimensions ~ 260 ~ 205 ~ 59 ~ 180 120 L Ø 80 L 100 116 Ø 6,5 70 ~43 ~76 5 and 10 with dosing head made of PVC, PP or PVDF ~ 202 ~ 237 ~176 ~ 56 L ~ 120 L Ø 80 Ø 6,5 70 100 116 ~ 17 ~ 81 5 and 10 with dosing head made of stainless steel ~ 202 ~ 237 ~ 181 ~ 53 L ~ 127 L Ø 84 Ø 6,5 70 100 116 ~ 17,5 ~ 84 15 and 20 with dosing head made of PVC, PP, PVDF or stainless steel All dimensions in mm Connection Material Size Nominal diameter L 4/6 mm DN4 31 mm 1/4x3/8" 1/4" 34 mm PVC, PP, PVDF 6/9 mm DN6 34 mm Hose clamp connection 6/12 mm DN6 15 mm 1.4571 / PVDF 4/6 mm DN4 50 mm 6/9 mm DN6 54 mm
Product Information Stepper Motor-driven Diaphragm Dosing Pump Conveying characteristics Settings 100% Delivery capacity 50% Delivery capacity 10% Delivery capacity For low supply rates, for example, the dosing pump performs the suction stroke at the maximum speed and adjusts the speed of the pressure stroke to match the desired supply rate. This produces an almost constant supply stream, which gives a low-pulsation dosing. The dosing pump in Slow Motion mode also has the option of reducing the suction speed in two steps. Thereby, more viscous media can be more easily conveyed and more accurate dosing attained. 10% Delivery capacity Slow Motion 1 10% Delivery capacity Slow Motion 2 Pressure stroke Suction stroke Accessories Suitable sets of accessories, which consists of a suction line, a pressure line and an injection nozzle, are available for the dosing pumps. Even the best pump can still be improved - namely by the right technical periphery. g h b c f a d e To make your dosing pump into an efficient dosing system, we recommend using the following accessories: Injection nozzles to dose the medium in the main line and to prevent it flowing back into the pressure line Pressure loading and relief valves to increase dosing accuracy or to protect the system against too high a pressure Pulsation dampener to damp supply currents as well as to reduce the flow resistance in long pipelines. Priming aids to significantly ease priming of dosing pumps with low supply volumes per stroke, for large suction heights, for highlyviscous dosing media or for initial priming or when priming after the system has been laying idle Suction pressure regulator to prevent medium flow when the dosing pump is not running or to prevent a vacuum being formed in the event of a pipe burst For further accessories for your dosing pump, please refer to our dosing pump brochure. Legend a b Injection nozzle with shut-off valve c Pulsation dampener d Pressure relief valve e Electrical agitator f Dosing tank g Shut-off valve h Suction pressure regulator PI-10101-02-V03 Copyright 08.2013 by Lutz-Jesco GmbH Subject to technical changes
Stepper motor-driven diaphragm dosing pump Functions Capacity range 2 19.2 l/h, up to 20 bar Power supply 110 240 V, 50/60 Hz, IP65, 25 W Microprocessor controlled drive Integrated dosing head venting facility (only 2, LP 5 and LP 10 with dosing head made of plastic) Suitable for wall and floor mounting Material finishes PVC, PP, PVDF and stainless steel Stroke frequency can be precisely adjusted via the keyboard Graphic display with multi-language menu Analogue input and pulse input (increase and reduction) Level input with early warning and main alarm Release input for external start/stop Supply amount displayed in various units Maximum delivery rate can be limited Diaphragm replacement programme 2 Slow Motion modes for dosing viscous media Stroke feedback output Alarm relay output Batch dosing with interval and timer functions Dosing control input Diaphragm rupture input for leak monitoring Ethernet interface (optional) CSA and UL certified Technical specifications Delivery capacity at max. back pressure l/h 2 5.3 10.8 14.2 19.2 ml/stroke 0,22 0.59 1.2 1.58 2.13 Max. back pressure bar 20 (16****) 15 9 5 4 Delivery capacity at average back pressure l/h 2,6 6 11.3 14.7 19.7 ml/stroke 0,28 0.67 1.26 1.63 2.19 Average back pressure bar 10 8 5 3 2 Max. stroke frequency RPM 150 Suction height for non-gassing media mws 3 Operating conditions and limits Permitted ambient temperature C 5 45 (5 40 with PVC parts)* Relative humidity % Max. 90 Max. sound pressure level db(a) 51 56 Max. supply pressure mbar 800 Viscosity limits mpas 300** / 1000*** Adjustable dosing range % 0 100 * Use of dosing pumps at ambient temperatures of under 5 C has to be checked individually. In those cases please contact the manufacturer. ** With a viscosity of ~300 mpas and above, you must use spring-loaded valves. *** If the viscosity is above 1000 mpas, this must be checked individually. **** PVC version
Stepper motor-driven diaphragm dosing pump Permitted media temperatures Dosing head made of PVC C 0 35 Dosing head made of PP C 0 60 Dosing head made of PVDF C 0 80 Dosing head made of stainless steel 1.4571 C 0 80 Electrical data Voltage supply 110 240 V, -10 % / +5 %, 50/60 Hz Power consumption W 25 Other data Weight (with dosing head made of PVC, PP or PVDF) kg ~2.2 Weight (with dosing head made of stainless steel) kg ~3.3 Diameter of diaphragm mm 33 39 54 Electrical cable m 1.8 (with mains plug) Protection class IP65 (with covering caps on the connections) Insulation class F Valve connection G5/8 external Valve size DN4 Delivery characteristic curves These delivery capacities were determined on the manufacturer s test stands. They apply at 20 C (68 F) for water, at 100 % stroke frequency. The delivery capacity depends on the medium (density and viscosity) and temperature. Since these conditions vary at every installation location, you should calibrate the dosing pump. Delivery capacity [l/h] 25,0 20,0 15,0 LP 20 LP 15 LP 10 10,0 LP 5 5,0 LP 2 0,0 0 5 10 15 20 25 Pressure [bar]