NORTH ISLAND 322 Rosedale Road, Albany, Auckland PH: FAX:

Irrigation Price List October 2011 CONTACT LIST.. NORTH ISLAND 322 Rosedale Road, Albany, Auckland PH: +64 9 415 0300 FAX: +64 9 415 0326 David Pearce Irrigation Division Manager DDI 09 415 0307 Mobile 0274 591 368 Email david.pearce@parkland.co.nz Morgan Rickwood Purchasing & Sales Admin DDI 09 415 0320 Email morgan.rickwood@parkland.co.nz Damien Walsh Irrigation Sales Engineer DDI 09 415 0305 Mobile 0274 916 171 Email damien.walsh@parkland.co.nz Selwyn Matthews Irrigation Service Manager Mobile 0274 553 844 Email selwyn.matthews@parkland.co.nz Mark Andrews Irrigation Service Engineer Mobile 0274 442 276 Email mark.andrews@parkland.co.nz Rob Baxter Irrigation Service Engineer Mobile 0272 274 294 Email rob.baxter@parkland.co.nz SOUTH ISLAND 455 Blenheim Road, Christchurch PH: 03-349 3760 FAX: 03-349 3765 Peter Gant Irrigation Manager DDI 03 349 3761 South Island Mobile 0274 355 861 Email peter.gant@parkland.co.nz Ken Beaumont Irrigation Service Engineer DDI 03 349 3769 Mobile 0272 749 894 Email ken.beaumont@parkland.co.nz Richard Prosser Irrigation Sales Engineer DDI 03 349 3760 Mobile 0274 8890611 Email richard.prosser@parkland.co.nz

1 Trading Terms and Conditions Detailed Trading Terms and Conditions are covered by a separate Trading Agreement. 2 Pricing The prices quoted in this price list may be amended from time to time. Prices charged for goods will be according to a current quotation. Parkland will endeavour to notify buyers of price changes, but there is no liability in this regard. Prices exclude insurances, packaging, delivery and GST. 3 Delivery and Packaging Unless otherwise agreed, goods sold to the buyer will be supplied ex Parkland s Auckland warehouse. Goods, (other than those back ordered) will be dispatched within 2 working days of receipt of an order. 4 Freight Unless specified, goods will be dispatched via a standard parcel service. Overnight courier service is available on request at the buyers expense. All orders will be subject to a freight, packaging and handling charge. 5 Orders and Performance The company may accept or refuse any order for goods at its absolute discretion. 6 Minimum Orders The minimum order the company will accept is $125 (net of discounts, if any, and before good & services tax). The company reserves the right to refuse smaller orders, or alternatively to apply a surcharge of $20. 7 Warranty Procedures Products are guaranteed to be free from defects in material and workmanship. Our obligation under this guarantee is limited to the repair or replacement of the product, at our option. Warranty period may vary between 1and 5 years depending on the product purchased. Product returned for warranty must clearly state the name of the purchaser, the date it was purchased, or installed, and the nature of the fault. 8 Returned Goods Only normal stocking items will be accepted for return. Items can only be accepted when returned within 15 days from the date on the packing slip. Goods must be in re-saleable condition, i.e. clean, complete and un-used. Any goods returned for credit must be accompanied by a copy of the original invoice. Failure to include this information may result in processing delays. Unless goods are returned as a consequence of error by Parkland Products, a 10% Return Goods Charge will be applied. The company will use its best endeavours to fulfil accepted orders and comply with any requested date for delivery, but time will not be of the essence in this regard. Parkland, at its absolute discretion, may extend the date for delivery or cancel the order without liability. Changes in specification and performance date for any item may be made by Parkland without notice and without incurring liability to the buyer.

Irrigation Price List Effective October 2011 Contents SECTION 1 - SPRINKLERS 1-18 SECTION 2 - VALVES 19-25 Spray Heads & Sprinklers Solenoid Valves Toro LPS Spray Head 1 Toro EZ-Flow Plus Valves 19 Toro 570 Spray Head 1,2 Richdel Valves 19 Toro Precision Series and 570 Nozzles 2-5 Irritrol Ultra-Flow Valves 19 Irritrol I-Pro Spray Heads 6 Irritrol Century Series Solenoid Valves 20 Irritrol Nozzles 6 Toro P220 Series Solenoid Valves 20 Irritrol Waterbird Low Pressure Spray 6 Toro/Irritrol Pressure Regulators 20 Toro 500 Series Bubblers 6 Mini Barb Solenoid Valves 20 Toro Mini8 Rotor 7 Valve Repair Kits 19,20 Toro Super800 Rotor 7 Toro T5 Rotor 7 Manual Isolation Valves 21 Toro IMPOP Impact Sprinkler 7 Toro T7 Rotor 8 Other Valves Irritrol Platinum Sport Rotor 8 Check Valves 22 Toro 640 Sprinkler 8 Norval Foot Valves 22 Toro TS90 Sports Rotor 8 Air Release and Vacuum Valves 22 Toro TG101 Large Turf Gun 8 Quick Coupling Valves 23 Toro 300 and S700 Rotors 9 Pressure Gauges and Adaptors 23 Toro Golf Sprinklers Valve Boxes 24 Toro 810G Series Sprinklers 10 Toro 720 Series Sprinklers 10 Valve Manifold Fittings 25 Toro B Series Sprinklers 10 Toro DT Series Sprinklers 10,11 SECTION 3 - CONTROLLERS & ELECTRICAL 26-32 Toro 835/855 Series Sprinklers 11 Toro DT Conversion Assemblies and Bodies 12 Automatic Controllers Toro 800S Conversion Assemblies and Bodies 12 Toro Tap Timer and Battery Controllers 26 Toro DDC Series Controllers 26 Travelling Irrigators GW25/GW40 13 Toro TMC-212 26 Toro TMC 424 27 Toro Service Tools & Accessories 14 Toro TDC Decoder Controller 27 Irritrol Kwik-Dial and Raindial Controllers 27 Impact Sprinklers Irritrol Total Control and MC Plus Controllers 27 Plastic Full & Part Circle Sprinklers 15 Irritrol MC E Series 27 Metal/Brass Full Circle Sprinklers 15,16 Heron Multi Wire and Decoder Controllers 28 Sprinkler Bases 16 Heron Central Software 28 Heron Sensor Inteface Cards 29 Swing Joints & Risers Heron Fretigation Systems 29 Dura High Pressure Swing Joints 17 Articulated Risers 17 Controller Accessories Flexi Risers 17 Toro Hydraulic Control Fittings 30 Rigid PVC Risers 17 Sensors - Rain, Flow, Soil Moisture 30 Polypropylene Risers 17 Control Wire 31 Hose & Fittings Washdown Hose 18 Electrical Accessories Fittings 18 Wire Connectors 32 Earth Rods 32

Irrigation Price List Effective October 2011 Contents SECTION 4 - DRIP & MICRO IRRIGATION 33-47 SECTION 5 - FILTRATION 48-52 Aqua-Traxx Drip Tape Manual Filters Aqua-Traxx Tape 33 Plastic Screen and Disc 48,49 Aqua-Traxx PC Pressure Compensating Tape 33 Epoxy Coated Steel Screen and Disc 49,50 Aqua-Traxx Tape Fittings 34 Automatic Filters 50 Drip Tubing Metzerplas Drip Tubes 34 Hydrocyclone Separators 51 Toro Ag Drip In Tube 35 Toro DRIPMAXX Drip Tube 35 Media Filters 51 Drip Eze Landscape Tubing Fertiliser Injection 52 4mm Drip Eze Tube 36 13mm Drip Eze Tube 36 Aluminium Fittings 52 13mm Drip Eze with Rootguard 36 Enviro Drip - Lilac Tube 36 SECTION 6 - PIPE FITTINGS 53-75 Drip Tube Fittings 37 PVC Pipe Fittings PVC Solvent Weld Fittings 53-60 Jet Sprays & Drippers PVC Solvent Cement and Primer 60 Veri-Flow Drippers and Tricklers 38 Centurion Jets 38 MDPE Fittings 61-65 Microjet Sprays 38 Jet Stakes and Risers 39 Hansen Fittings 66-69 Turbo Key Drippers 39 Turbo Plus PC Drippers 39 LDPE Fittings 70-72 NGE PC Drippers 39 Black Spider Pot Distribution System 39 Cast/Ductile Iron Fittings Pot Spray Stakes 39 Tapping Bands 73 Gibaults 73 Mini Sprinklers Flange Adaptors 73 Waterbird Sprinklers 40,41 Tees 74 Fogger Assemblies 41 Bends 74 Browning B500 42 Reducers 74 Antelco Sprinklers 42 Sluice Valves 74 Stakes & Accessories 42 Galvanised Fittings 75 Bulk Polyethylene Fittings SECTION 7 - OTTERBINE AERATION 76-81 Fittings 43-45 Taps 45 Punches 45 Ratchet Clips 46 Drip-Loc Fittings 47

Aqua-Traxx, Premium Drip Tape 16mm Aqua-Traxx 4 Mil EA50404134 10 cm Spacing Standard Flow (1.02lph @ 55kPa) 3,960m per roll 1 668.00 EA5040834 20 cm Spacing LOW Flow (0.49lph @ 55kPa) 3,960m per roll 1 668.00 EA5040867 20 cm Spacing Standard Flow (1.02lph @ 55kPa) 3,960m per roll 1 668.00 6 Mil EA50604134 10 cm Spacing Standard Flow (1.02lph @ 55kPa) 3,045m per roll 1 552.00 EA5060834 20 cm Spacing LOW Flow (0.49lph @ 55kPa) 3,045m per roll 1 552.00 EA5060867 20 cm Spacing Standard Flow (1.02lph @ 55kPa) 3,045m per roll 1 552.00 8 Mil EA50804134 10 cm Spacing Standard Flow (1.02lph @ 55kPa) 2,285m per roll 1 488.00 EA5080834 20 cm Spacing LOW Flow (0.49lph @ 55kPa) 2,285m per roll 1 488.00 EA5080867 20 cm Spacing Standard Flow (1.02lph @ 55kPa) 2,285m per roll 1 488.00 10 Mil EA51004134 10 cm Spacing Standard Flow (1.02lph @ 55kPa) 1,830m per roll 1 461.00 EA5100834 20 cm Spacing LOW Flow (0.49lph @ 55kPa) 1,830m per roll 1 461.00 EA5100867 20 cm Spacing Standard Flow (1.02lph @ 55kPa) 1,830m per roll 1 461.00 EA5101245 30 cm Spacing Standard Flow (1.02lph @ 55kPa) 1,830m per roll 1 461.00 15 Mil EA5151245 30 cm Spacing Standard Flow (1.02lph @ 55kPa) 1,219m per roll 1 475.00 EA5152411 60 cm Spacing Standard Flow (1.02lph @ 55kPa) 1,219m per roll 1 475.00 22mm Aqua-Traxx 8 Mil EA7080834 20 cm Spacing LOW Flow (0.49lph @ 55kPa) 2,285m per roll 1 POA EA7080867 20 cm Spacing Standard Flow (1.02lph @ 55kPa) 2,285m per roll 1 POA 10 Mil EA7100867 20 cm Spacing Standard Flow (1.02lph @ 55kPa) 2,285m per roll 1 POA EA7101245 30 cm Spacing Standard Flow (1.02lph @ 55kPa) 2,285m per roll 1 POA Available Spacings: 100mm, 150mm, 200mm, 300mm, 400mm, 450mm, 600mm - to order Flow Rates: 0.49lph, 0.76lph, 1.02lph, 1.2lph Aqua-Traxx PC, Pressure Compensating Drip Tape 16 mm Aqua-Traxx PC 8 Mil EAP5080850 20 cm Spacing Medium Flow (0.76lph @ 55kPa) 2,285m per roll 1 POA 10 Mil EAP5100850 20 cm Spacing Medium Flow (0.76lph @ 55kPa) 1,830m per roll 1 POA EAP5100867 20 cm Spacing Standard Flow (1.02lph @ 55kPa) 1,830m per roll 1 POA Available Spacings: 200mm, 300mm, 400mm, 450mm, 600mm. Page 33

Aquatraxx Tape Fittings 1014100 16mm Tape Joiner 25 1.69 1014111 22mm Tape Joiner 25 3.30 1014109 16mm Tape Tee 25 2.67 1014108 16mm Tape x 25mm BSP Female Tee 25 5.30 FCR1398 13mm Lateral Tube x 16mm Tape Joiner 25 2.69 GSTA16 16mm Tape Grommet Take Off Complete 25 2.42 1014101 10mm Barb x 16mm Tape Off-Take 25 1.43 1014102 10mm Compression Off-Take x 16mm Tape Joiner 25 1.42 1014105 16mm Tape x 20mm BSP Director 25 1.86 1014113 22mm Tape x 20mm BSP Director 25 3.45 1014107 16mm Barb x 16mm Tape In-Line Tap 25 3.90 1014110 16mm Tape End Plug 25 1.87 1014195 Flush & Drain Valve (Closing Pressure 5.5 kpa) x 16mm Tape 25 10.80 1014811 20mm FPT Vent Valve Closing Pressure 5.5 kpa 25 6.83 MHT-06-LS 16mm Tape x 20mm MHT Director - Use With 1014811 Valve 25 1.93 MHT-09-LS 22mm Tape x 20mm MHT Director - Use With 1014811 Valve 25 3.41 1014103 Adaptor-Lay Flat Tube x 16mm Tape Joiner 25 1.51 1014115 Adaptor-Lay Flat Tube x 22mm Tape Joiner 25 2.60 101LFC16 Layflat Cutter 1 400.30 METZERPLAS Drip Irrigation 16 mm Vardit 0.9mm Wall Thickness (Max Pressure 3.5Bar) Code Per 500m VAR16916050 Vardit 16mm, 1.6lph at 0.5m Spacing 1 395.00 17 mm Vardit 0.9mm Wall Thickness (Max Pressure 3.5Bar) Code Per 500m VAR17912040 Vardit 17mm, 1.2lph at 0.4m Spacing 1 476.00 VAR17912050 Vardit 17mm, 1.2lph at 0.5m Spacing 1 449.00 VAR17912060 Vardit 17mm, 1.2lph at 0.6m Spacing 1 411.00 Page 34

Toro Ag Drip-In PC Extra Emitter Flow Rates:- 1.6, 2.0, 2.4 and 4.0lph 16mm Drip-In - OD = 16mm, ID = 14mm, Maximum Pressure = 450kPa, 450m/roll 20mm Drip-In - OD = 20mm, ID = 18mm, Maximum Pressure = 450kPa, 300m/roll Spacings Available: 0.3, 0.4, 0.5, 0.6, 0.75, 0.9, 1.0, 1.2, 1.5m and Grouped. 16 mm Drip-In - PC Extra (Pressure Compensating) Spacing Code Per 450m DDC1616030 16 mm Drip-In 1.6 lph at 0.30m Spacing (450m) 1 POA 0.3m DDC1620030 16 mm Drip-In 2.0 lph at 0.30m Spacing (450m) 1 POA 1015583 16 mm Drip-In 2.4 lph at 0.30m Spacing (450m) 1 POA DDC1616040 16 mm Drip-In 1.6 lph at 0.40m Spacing (450m) 1 POA 0.4m DDC1620040 16 mm Drip-In 2.0 lph at 0.40m Spacing (450m) 1 POA 1015584 16 mm Drip-In 2.4 lph at 0.40m Spacing (450m) 1 POA DDC1616050 16 mm Drip-In 1.6 lph at 0.50m Spacing (450m) 1 558.50 0.5m 1015585 16 mm Drip-In 2.4 lph at 0.50m Spacing (450m) 1 558.50 1015605 16 mm Drip-In 4.0 lph at 0.50m Spacing (450m) 1 558.50 DDC1616060 16 mm Drip-In 1.6 lph at 0.60m Spacing (450m) 1 525.00 0.6m 1015586 16 mm Drip-In 2.4 lph at 0.60m Spacing (450m) 1 525.00 1015606 16 mm Drip-In 4.0 lph at 0.60m Spacing (450m) 1 525.00 DDC1616075 16 mm Drip-In 1.6 lph at 0.75m Spacing (450m) 1 POA 0.75m 1015587 16 mm Drip-In 2.4 lph at 0.75m Spacing (450m) 1 POA 1015607 16 mm Drip-In 4.0 lph at 0.75m Spacing (450m) 1 POA DDC1616090 16 mm Drip-In 1.6 lph at 0.90m Spacing (450m) 1 POA 0.9m 1015589 16 mm Drip-In 2.4 lph at 0.90m Spacing (450m) 1 POA 1015609 16 mm Drip-In 4.0 lph at 0.90m Spacing (450m) 1 POA 20 mm Drip-In - PC Extra (Pressure Compensating) Spacing Code Per 300m DDC2016040 20 mm Drip-In 1.6 lph at 0.40m Spacing (300m) 1 POA DDC2016060 20 mm Drip-In 1.6 lph at 0.60m Spacing (300m) 1 POA 0.6 m DDC2020060 20 mm Drip-In 2.0 lph at 0.60m Spacing (300m) 1 POA 1015735 20 mm Drip-In 4.0 lph at 0.60m Spacing (300m) 1 POA DDC2016090 20 mm Drip-In 1.6 lph at 0.90m Spacing (300m) 1 POA 0.9 m 1015640 20 mm Drip-In 2.4 lph at 0.90m Spacing (300m) 1 POA 1015737 20 mm Drip-In 4.0 lph at 0.90m Spacing (300m) 1 POA Toro DRIPMAXX Drip Tube DRIPMAXX Options Sizes Wall Thickness Flow Rates Dripper Options Pressure Rating Roll lengths 13mm, 15mm ID, 19mm, 25mm 0.9mm (25mm Tube is 1mm) 0.8lph, 1.2lph, 1.6lph, 2.0lph, 3.5lph, Non -Comp, Compensating, Anti-Siphon, Non-Drain, Rootguard 350kPa 13mm - 600m, other sizes all 350m Drip Tube available to order to suit specification - POA Page 35

Toro Ag Drip-In PC Extra Tubing with ROOTGUARD R Specialised heavy duty dripline for use in sub-surface applications. ROOTGUARD R technology combines Treflan R with the drip emitter to prevent lateral root growth into the emitter. No other chemical treatment against roots is required. 13mm Drip-In PC With ROOTGUARD R Spacing Code 0.3m DGC1320030-100 13mm Drip-In with Rootguard 2.0 lph at 0.30m Spacing (100m Coil) 1 224.00 DGC1320030-200 13mm Drip-In with Rootguard 2.0 lph at 0.30m Spacing (200m Coil) 1 419.00 0.4m DGC1320040-100 13mm Drip-In with Rootguard 2.0 lph at 0.40m Spacing (100m Coil) 1 194.00 DGC1320040-200 13mm Drip-In with Rootguard 2.0 lph at 0.40m Spacing (200m Coil) 1 359.00 All standard 13mm lateral fittings can be used with this product. 16mm Drip-In PC With ROOTGUARD R Spacing Code 0.5m DGC1624050 16mm Drip-In with Rootguard 2.4 lph at 0.50m Spacing (400m Coil) 1 684.00 DGC1640050 16mm Drip-In with Rootguard 4.0 lph at 0.50m Spacing (400m Coil) 1 684.00 0.6m DGC1624060 16mm Drip-In with Rootguard 2.4 lph at 0.60m Spacing (400m Coil) 1 637.00 DGC1640060 16mm Drip-In with Rootguard 4.0 lph at 0.60m Spacing (400m Coil) 1 637.00 All 16mm Drip-In and 13mm Drip-Loc fittings can be used with this product. Drip Eze Landscape Tubing 4mm Non Compensating DDN0420030-25 4mm DRIP EZE 2.0 lph at 0.3m Spacing (25m Coil) 1 59.00 DDN0420030-50 4mm DRIP EZE 2.0 lph at 0.3m Spacing (50m Coil) 1 116.00 DDN0420030-100 4mm DRIP EZE 2.0 lph at 0.3m Spacing (100m Coil) 1 199.00 13mm Non Compensating 2.0lph DDN1320030-50 13mm DRIP EZE 2.0 lph at 0.3m Spacing (50m Coil) 1 65.00 DDN13200030-100 13mm DRIP EZE 2.0 lph at 0.3m Spacing (100m Coil) 1 123.00 DDN1320030-200 13mm DRIP EZE 2.0 lph at 0.3m Spacing (200m Coil) 1 238.00 13mm Compensating 1.6lph DDC1316040-50 13mm DRIP EZE 1.6 lph at 0.4m Spacing (50m Coil) 1 86.00 DDC1316040-100 13mm DRIP EZE 1.6 lph at 0.4m Spacing (100m Coil) 1 169.00 DDC1316040-200 13mm DRIP EZE 1.6 lph at 0.4m Spacing (200m Coil) 1 327.00 13mm Compensating 2.0lph DDC1320030-50 13mm DRIP EZE 2.0 lph at 0.3m Spacing (50m Coil) 1 83.00 DDC1320030-100 13mm DRIP EZE 2.0 lph at 0.3m Spacing (100m Coil) 1 159.00 DDC1320030-200 13mm DRIP EZE 2.0 lph at 0.3m Spacing (200m Coil) 1 312.00 DDC1320040-50 13mm DRIP EZE 2.0 lph at 0.4m Spacing (50m Coil) 1 79.00 DDC1320040-100 13mm DRIP EZE 2.0 lph at 0.4m Spacing (100m Coil) 1 155.00 DDC1320040-200 13mm DRIP EZE 2.0 lph at 0.4m Spacing (200m Coil) 1 299.00 DDC1320050-200 13mm DRIP EZE 2.0 lph at 0.5m Spacing (200m Coil) 1 278.00 DDC1320060-200 13mm DRIP EZE 2.0 lph at 0.6m Spacing (200m Coil) 1 265.00 13mm ENVIRO-DRIP PC - Lilac DLC1320030-50 13mm DRIP EZE Lilac 2.0 lph at 0.3m Spacing (50m Coil) 1 99.00 DLC1320030-100 13mm DRIP EZE Lilac 2.0 lph at 0.3m Spacing (100m Coil) 1 178.00 DLC1320030-200 13mm DRIP EZE Lilac 2.0 lph at 0.3m Spacing (200m Coil) 1 353.00 ENVIRO-DRIP is recommended for use with non potable water. Page 36

Drip Tube Fittings and Accessories Fittings For 16mm Drip Tube 1015667 16 mm Joiner Drip-In 20 0.27 1015697 16 mm Tee Drip-In 20 0.55 1015687 16 mm Elbow Drip-In 20 0.74 101YC-16 16 mm Drip Tube Y Connector 1 3.00 1015655 16 mm Ratchet Clip Suit Drip-In 100 0.23 1015662 16 mm Tail x 20mm BSP Male Director 20 0.95 1015666 16 mm In-Line Tap Drip-In 20 3.13 1015678 16 mm Grommet Take-Off Drip-In 20 1.32 1015689 16 mm Grommet only 20 0.74 101FE16 16 mm Flushing End with O Ring Seal 50 4.00 VC16 13-16 mm Vine Trellis Clip 1000 0.19 Note: Drip-loc 13 mm Fittings are also suitable for use with 16mm Drip-In (see page 48) Fittings For 17mm Drip Tube 10146005 17 mm Joiner 25 0.61 10144345 17 mm Ratchet Clip 100 0.35 10146065 17 mm Drip Line x 19 mm Lateral Reducing Joiner 25 1.44 10146165 17 mm Drip Line x 19 mm Lateral Elbow 25 1.12 10146305 17 mm Drip Line x 16 mm Lateral Branch Increasing Tee 25 2.00 10146315 17 mm Drip Line x 19 mm Lateral Branch Increasing Tee 25 2.76 10145615 17 mm Drip Line x 13 mm Grommet Off Take Adaptor 25 1.17 10145735 13 mm Grommet - Use with 10145615 100 0.57 10145555 17 mm Green Back Valve 20 3.90 Fittings For 18mm Drip-In 1015663 18 mm Joiner Drip-In 25 1.63 1015665 18 mm x 16 mm Reducing Joiner Drip-In 25 0.52 1015680 18 mm Grommet Take-Off 25 2.50 1015656 18 mm Ratchet Clip Suit Drip-In 100 0.93 VC20 18-20 mm Vine Trellis Clip 100 0.19 Note: Drip-loc 16 mm Fittings are also suitable for use with 18mm Drip-In (see page 48) Fittings For 20mm Drip-In 1015668 20 mm Joiner Drip-In 20 2.48 1015698 20 mm Tee Drip-In 20 0.77 1015688 20 mm Elbow Drip-In 20 0.85 1011153 20 mm Ratchet Clip Drip-In 20 0.37 1015664 20 mm Tail x 20mm BSP Male Director 20 1.93 1015669 20 mm x 16mm Reducing Joiner Drip-In 20 2.52 1015681 20 mm Grommet Take-Off Drip-In 20 0.00 VC20 20 mm Vine Trellis Clip 100 0.19 Note: Drip-loc 19 mm Fittings are also suitable for use with 20mm Drip-In (see page 48) Riser Tube 1015659 16mm Riser Tube (450m Coil) 1 465.08 XR1512-200 17mm Riser Tube (200m Coil) 1 234.31 1015660 20mm Riser Tube (300m Coil) 1 392.23 For connection from sub-main to drip line Page 37

Jet Sprays & Drippers Veri-Flow Adjustable Dripper & Tricklers 1011295 Veri-Flow Dripper Adjustable Flow 0-60l/h 200 0.56 1011292 Trickler, 360 12 Stream Adjustable Flow 0-30l/h 4mm Barb 200 0.48 10131245 Trickler, 180 5 Stream Adjustable Flow 0-50l/h 4mm Barb 100 0.66 10131295 Trickler, 180 5 Stream Adjustable Flow 0-50l/h 0n 100mm Spike 100 1.32 1011294 Trickler, 360 8 Stream Adjustable Flow 0-50l/h 4mm Barb 100 0.74 1011299 Trickler, 360 8 Stream Adjustable Flow 0-50l/h on 100mm Spike 25 0.95 Landscape Bubblers & Jets 10131745 Mini Bubbler Adjustable Flow 0-130l/h, 4mm Barb 100 0.94 10131725 Mini Bubbler Adjustable Flow 0-130l/h, 15mm Female Base 25 1.84 10131795 Mini Bubbler Adjustable Flow 0-130l/h, on 100mm Spike 25 1.18 1011315 Spectrum 360 Jet Adjustable Flow 0-90l/h, 4mm Barb 50 1.07 1011316 Spectrum 360 Jet Adjustable Flow 0-90l/h, 4mm Thread 50 1.04 1011318 Spectrum 360 Jet Adjustable Flow 0-90l/h, 100mm Spike 25 1.35 Centurion Spray Jets - One Piece 1011305 Centurion Jet, Spray 90 o 49l/h @ 100kPa 100 0.14 1011306 Centurion Jet, Spray 180 o 62l/h @ 100kPa 100 0.14 1011307 Centurion Jet, Spray 360 o 86l/h @ 100kPa 100 0.14 Spray Jets - Winged One Peice 10115445 Full Circle Blue Base, 35l/h @ 100kPa 100 0.22 10115425 1/2 Circle Blue Base, 35l/h @ 100kPa 100 0.22 10115415 1/4 Circle Blue Base, 35l/h @ 100kPa 100 0.22 10115545 Full Circle Green Base, 70l/h @ 100kPa 100 0.22 10115525 1/2 Circle Green Base, 70l/h @ 100kPa 100 0.22 10115515 1/4 Circle Green Base, 70l/h @ 100kPa 100 0.22 10115645 Full Circle Black Base, 90l/h @ 100kPa 100 0.22 10115625 1/2 Circle Black Base, 90l/h @ 100kPa 100 0.22 10115615 1/4 Circle Black Base, 90l/h @ 100kPa 100 0.22 Micro Spray 2 Piece Jets 1011311 1/4 Circle Complete - Blue Base, 32l/h @ 100kPa 100 0.48 1011312 1/2 Circle Complete - Blue Base, 32l/h @ 100kPa 100 0.48 1011314 Full Circle Complete - Blue Base, 32l/h @ 100kPa 100 0.48 1011353 Micromist Spray, 18l/h @ 100kPa - For Inverted Use 100 0.20 Genuine Microjet TM 2 Piece Contractor Jets - While Stocks Last 101BL90 1/4 Circle Black Base 24lph @ 150kPa 100 0.38 101BL180 1/2 Circle Black Base 24lph @ 150kPa 100 0.38 101BL360 Full Circle Black Base 24lph @ 150kPa, 15 hole 100 0.38 101BU90 1/4 Circle Blue Base 40lph @ 150kPa 100 0.38 101BU180 1/2 Circle Black Base 40lph @ 150kPa 100 0.38 101BU360 Full Circle Black Base 40lph @ 150kPa, 15 hole 100 0.38 101GN90 1/4 Circle Green Base 64lph @ 150kPa 100 0.38 101GN180 1/2 Circle Green Base 64lph @ 150kPa 100 0.38 101GN360 Full Circle Green Base 64lph @ 150kPa, 15 hole 100 0.38 101RD90 1/4 Circle Red Base 95lph @ 150kPa 100 0.38 101RD180 1/2 Circle Red Base 95lph @ 150kPa 100 0.38 101RD360 Full Circle Red Base 95lph @ 150kPa, 15 hole 100 0.38 Page 38

Jet Sprays & Drippers Jet Stakes and Risers 1011132 200 mm Rigid Riser with Adaptor 100 0.41 1011133 300 mm Rigid Riser with Adaptor 100 0.48 1011134 450 mm Rigid Riser with Adaptor 100 0.61 1011131 200mm Asta Riser Stake suit 4mm Tube 50 0.71 1011135 310mm Asta Riser Stake suit 4mm Tube 50 0.94 1011364 420mm Asta Riser Stake suit 4mm Tube 50 1.66 1011137 Jetstake suit 4mm/5mm Off-Take Tube 10 1.32 1011139 Microstake with Tube and Adaptor 10 3.45 10141015 Jet Riser Adaptor 15mm FBSP x 4mm 25 0.85 Agricultural Drip Emitters 1014002 2 L/h Turbo-Key Dripper 200 0.57 1014004 4 L/h Turbo-Key Dripper 200 0.57 1014008 8 L/h Turbo-Key Dripper 200 0.57 1014052 2 L/h Turbo-Plus II (Pressure Compensating) 200 0.62 1014054 4 L/h Turbo-Plus II (Pressure Compensating) 200 0.62 1014058 8 L/h Turbo-Plus II (Pressure Compensating) 200 0.62 DPC02-MA 2 L/h NGE PC Drip Emitter with Anti-Siphon 200 0.47 DPC03-MA 3 L/h NGE PC Drip Emitter with Anti-Siphon 200 0.47 DPC04-MA 4 L/h NGE PC Drip Emitter with Anti-Siphon 200 0.47 DPC08-MA 8 L/h NGE PC Drip Emitter with Anti-Siphon 200 0.47 DPC02-MA-AL 2 L/h NGE PC Drip Emitter with Anti-Drip (Closes at 24kPa) 200 0.63 DPC03-MA-AL 3 L/h NGE PC Drip Emitter with Anti-Drip (Closes at 28 kpa) 200 0.63 DPC04-MA-AL 4 L/h NGE PC Drip Emitter with Anti-Drip (Closes at 31 kpa) 200 0.63 DPC08-MA-AL 8 L/h NGE PC Drip Emitter with Anti-Drip (Closes at 35 kpa) 200 0.63 Black Spider Pot Distribution System (Suits outlet from NGE and Turbo-Plus emitters) FBS1E Single Outlet Barbed Elbow x Female Adaptor 100 0.16 FBS1S Single Outlet Barbed Straight x Female Adaptor 100 0.20 FBS2 2 Outlet Barbed Tee x Female Adaptor 100 0.17 FBS2-MA 2 Outlet Barbed Manifold x Female/Male Adaptor 100 0.17 IPS0301 Turbulent Flow Straight Stake 100 0.15 IPS0301BQ Turbulent Flow Barbed Elbow Stake 100 0.22 IPS0301Q Turbulent Flow Elbow Stake 100 0.26 SFH0332-18 3mm Spider Tube 450mm Long 1 0.17 SFH0332-24 3mm Spider Tube 600mm Long 1 0.26 SFH0332-36 3mm Spider Tube 900mm Long 1 0.55 Pot Spray Stakes (uses 3mm Spider Tube as above) IPS03BK Pot Spray Stake Black, 21lph @ 140kPa 50 0.60 IPS03BL Pot Spray Stake Black, 40 lph @ 140kPa 50 0.59 IPS03GR Pot Spray Stake Black, 60 lph @ 140kPa 50 0.59 Page 39

Mini-Sprinklers - Waterbird Waterbird R III-AA, 10 mm Male Base Anti-Ant Sprinkler (Insect Proof) Performance at 150 kpa Inlet Pressure 1014244 Waterbird III-AA 10 mm, Maroon at 66 l/h 50 1.25 1014248 Waterbird III-AA 10 mm, Grey at 144 l/h 50 1.25 Waterbird R VI, 10 mm Male Base Performance at 150 kpa Inlet Pressure 1014271 Waterbird VI 10 mm, Black Nozzle at 36 l/h 50 1.35 1014272 Waterbird VI 10 mm, White Nozzle at55 l/h 50 1.35 1014273 Waterbird VI 10 mm, Maroon Nozzle at 76 l/h 50 1.35 1014274 Waterbird VI 10 mm, Green Nozzle at 99 l/h 50 1.35 1014275 Waterbird VI 10 mm, Blue Nozzle at 134 l/h 50 1.35 1014276 Waterbird VI 10 mm, Grey Nozzle at 155 l/h 50 1.35 1014277 Waterbird VI 10 mm, Yellow Nozzle at 192 l/h 50 1.35 1014278 Waterbird VI 10 mm, Red Nozzle at 265 l/h 50 1.35 Waterbird R VI, 10 mm Male Base with Deflector Tab Spinner Performance at 150 kpa Inlet Pressure 1014281 Waterbird VI 10 mm, Black Nozzle at 36 l/h 50 1.40 1014282 Waterbird VI 10 mm, White Nozzle at 55 l/h 50 1.40 1014283 Waterbird VI 10 mm, Maroon Nozzle at 76 l/h 50 1.40 1014284 Waterbird VI 10 mm, Green Nozzle at 99 l/h 50 1.40 1014285 Waterbird VI 10 mm, Blue Nozzle at 134 l/h 50 1.40 Waterbird R VI, Pressure Compensating 10 mm Male Base 1014757 Waterbird VI PC 10 mm, Purple Nozzle at 27 l/h 50 1.67 1014758 Waterbird VI PC 10 mm, Brown Nozzle at 36 l/h 50 1.67 1014759 Waterbird VI PC 10 mm, Light Blue Nozzle at 47 l/h 50 1.67 1014760 Waterbird VI PC 10 mm, Light Green Nozzle at 55 l/h 50 1.67 1014761 Waterbird VI PC 10 mm, Orange Nozzle at 70 l/h 50 1.67 1014762 Waterbird VI PC 10 mm, Grey Nozzle at 90 l/h 50 1.67 Waterbird R VI, Pressure Compensating 10 mm Male Base with Deflector Tab Spinner 1014709 Waterbird VI PC 10 mm, Purple Nozzle with Tab at 27 l/h 50 1.70 1014770 Waterbird VI PC 10 mm, Brown Nozzle with Tab at 36 l/h 50 1.70 1014771 Waterbird VI PC 10 mm, Light Blue Nozzle with Tab at 47 l/h 50 1.70 1014772 Waterbird VI PC 10 mm, Light Green Nozzle with Tab at 55 l/h 50 1.70 1014773 Waterbird VI PC 10 mm, Orange Nozzle with Tab at 70 l/h 50 1.70 1014774 Waterbird VI PC 10 mm, Grey Nozzle with Tab at 90 l/h 50 1.70 Page 40

Mini-Sprinklers - Waterbird Waterbird R VI Assembled on Stake With 0.6 m of 5 mm Tube 1014291 Waterbird VI 10 mm, Black Nozzle at 36 l/h 50 4.49 1014292 Waterbird VI 10 mm, White Nozzle at 55 l/h 50 4.49 1014293 Waterbird VI 10 mm, Maroon Nozzle at 76 l/h 50 4.49 1014294 Waterbird VI 10 mm, Green Nozzle at 99 l/h 50 4.49 Waterbird R VI Assembled on 10mm Ag Stake with 0.8m of 10mm Tube and Off-Take 1014385 Waterbird VI 10 mm, Green Nozzle at 99 l/h 50 7.96 1014386 Waterbird VI 10 mm, Blue Nozzle at 134 l/h 50 7.96 1014387 Waterbird VI 10 mm, Grey Nozzle at 155 l/h 50 7.96 1014388 Waterbird VI 10 mm, Yellow Nozzle at 192 l/h 50 7.96 1014389 Waterbird VI 10 mm, Red Nozzle at 265 l/h 50 7.96 Waterbird R VI, Pressure Compensating Assembled on Stake with 0.6 m of 5mm Tube 1014710 Waterbird VI PC 10 mm, Purple Nozzle at 27 l/h 50 4.77 1014765 Waterbird VI PC 10 mm, Brown Nozzle at 36 l/h 50 4.77 1014766 Waterbird VI PC 10 mm, Light Blue Nozzle at 47 l/h 50 4.77 1014767 Waterbird VI PC 10 mm, Light Green Nozzle at 55 l/h 50 4.77 1014768 Waterbird VI PC 10 mm, Orange Nozzle at 70 l/h 50 4.77 1014769 Waterbird VI PC 10 mm, Grey Nozzle at 90 l/h 50 4.77 Mini-Sprinklers - The Olive Sprinkler Waterbird R VI, Pressure Compensating With Deflector Tab Spinner fitted on Red Olive Stake with 0.6 m of 5 mm Tube 1014790 Waterbird VI PC 10 mm, Brown Nozzle at 36 l/h 50 4.96 1014790-1 Waterbird VI PC 10 mm, Brown Nozzle at 36 l/h - 1.0 m tube 50 5.64 1014792 Waterbird VI PC 10 mm, Light Blue Nozzle at 47 l/h 50 4.96 1014793 Waterbird VI PC 10 mm, Light Green Nozzle at 55 l/h 50 4.96 1014794 Waterbird VI PC 10 mm, Orange Nozzle at 70 l/h 50 4.96 1014795 Waterbird VI PC 10 mm, Grey Nozzle at 90 l/h 50 4.96 Waterbird R VI, Non Pressure Compensating With Deflector Tab Spinner fitted on Red Olive Stake with 0.6 m of 5 mm Tube 1014791 Waterbird VI 10 mm, Black Nozzle at 36 l/h 50 4.64 The Olive Sprinkler Accessories 1014376 Red Stake suit Olive Sprinkler - 5 mm Inlet 50 1.58 1014378 Red Stake With 0.6 m of 5 mm Tube fitted 50 2.81 WBT5200 5 mm x 200 m PVC tubing 1 264.80 1014220 Snap-On 180 degree deflector (Red) 50 0.30 Fogger Nozzles Fogger Assembly Assembly with 300mm Tube and Weight FOGCP43 Four Nozzle Fogger Complete 3lph Nozzles 1 11.38 FOGCP44 Four Nozzle Fogger Complete 4lph Nozzles 1 11.38 FOGCP46 Four Nozzle Fogger Complete 6lph Nozzles 1 11.38 FOGCP48 Four Nozzle Fogger Complete 8lph Nozzles 1 11.38 CFFA Fogger Cap 1 0.30 Page 41

Mini-Sprinklers Browning TM B500 Sprinklers 1014270 Browning B500, 15mm Male Base without Nozzles 1 3.70 Order Sprinkler & Two Nozzles Browning TM B500 Nozzles 1014261 Browning B500 Nozzle 03 1 0.72 1014262 Browning B500 Nozzle 05 1 0.72 1014263 Browning B500 Nozzle 10 1 1.15 1014264 Browning B500 Nozzle 11 1 0.72 1014265 Browning B500 Nozzle 15 1 0.72 1014266 Browning B500 Nozzle 16 1 0.72 Mini Spinners 10120025 Standard Spinner, Brown Jet - 38lph @ 150kPa 1 1.30 10120015 Standard Spinner, Blue Jet - 46lph @ 150kPa 1 1.30 10120035 Standard Spinner, Green Jet - 88lph @ 150kPa 1 1.30 10120055 Standard Spinner, Red Jet - 120 lph @ 150kPa 1 1.30 10120125 Inverted Spinner, Brown Jet - 38lph @ 150kPa 1 1.59 10120115 Inverted Spinner, Blue Jet - 46lph @ 150kPa 1 1.59 10120135 Inverted Spinner, Green Jet - 88lph @ 150kPa 1 1.59 10120155 Inverted Spinner, Red Jet - 120lph @ 150kPa 1 1.59 Rotor Max Midi Sprinklers 10121155 Rotor Max Red Nozzle 10mm Base - 400lph @ 200kPa 13m dia 1 9.76 10121105 Rotor Max Black Nozzle 10mm Base - 540lph @ 200kPa 13m dia 1 9.76 10121165 Rotor Max Purple Nozzle 10mm Base - 775lph @ 200kPa 13.8m dia 1 9.76 10121555 Rotor Max Inverted Red Nozzle 15mm Base - 400lph @ 200kPa 13m dia 1 9.76 10121505 Rotor Max Inverted Black Nozzle 15mm Base - 540lph @ 200kPa 13m dia 1 9.76 10121565 Rotor Max Inverted Purple Nozzle 15mm Base - 775lph @ 200kPa 13.8m dia 1 9.76 Waterbird & Mini Sprinkler Stakes & Accessories 1014374 Waterbird Stake 5mm Vertical Inlet 1 1.49 1014372 Waterbird Stake 5mm Vertical Inlet Fitted with 0.6m of Tube 1 2.79 WBS1045 Waterbird Stake 10mm with 45 o Inlet (Ag Stake) 1 1.44 WBS1045WT Waterbird Stake 10mm with 45 o Inlet (Ag Stake) and 0.8m of 10mm Tube 1 4.45 1014377 Mini-Sprinkler Rod Stake Adaptor, 5mm Barbed x 10mm Female 1 0.64 IPG10091 Waterbird PC Rod Stake Adaptor, 5mm Barbed x 10mm Female 1 0.58 GR5 5mm Galvanised Rod Stake 1.0m 1 3.26 1014396 15mm/10mm Stake Adaptor with 10mm Hose Tail 1 1.92 (Accepts 20mm upvc cut to length for stake) WBD180B Waterbird Snap-On 180 o Deflector (Black) 1 0.76 WBT5200 5mm Waterbird Flexible PVC Tubing x 200m Coil 1 264.80 Page 42

Bulk Polyethylene Fittings Nuts & Tails 1011001 20 mm BSP Nut and 13 mm Tail 25 1.04 1011002 25 mm BSP Nut and 13 mm Tail 25 1.45 1011003 20 mm BSP Nut and 19 mm Tail 25 1.25 1011004 25 mm BSP Nut and 19 mm Tail 25 1.45 1011005 25 mm BSP Nut and 25 mm Tail 25 2.45 Directors 1011060 13 mm Tail x 15 mm BSP Male Director 25 0.52 1011061 13 mm Tail x 20 mm BSP Male Director 25 0.59 1011062 13 mm Tail x 25 mm BSP Male Director 25 0.78 1011063 19 mm Tail x 15 mm BSP Male Director 25 0.71 1011064 19 mm Tail x 20 mm BSP Male Director 25 0.59 1011065 19 mm Tail x 25 mm BSP Male Director 25 0.89 1011066 25 mm Tail x 20 mm BSP Male Director 25 0.96 1011067 25 mm Tail x 25 mm BSP Male Director 25 0.96 Tees 1011009 Barbed Tee 4 mm - all tails 50 0.30 1011011 Barbed Tee 13 mm - all tails 25 0.37 1011012 Barbed Tee 16 mm - all tails 25 1.53 1011013 Barbed Tee 19 mm - all tails 25 0.59 1011014 Barbed Tee 25 mm - all tails 25 1.08 Reducing Tees 1011021 Barbed Tee 19 mm line x 13 mm Branch 25 0.70 1011022 Barbed Tee 25 mm line x 13 mm Branch 25 1.26 1011024 Barbed Tee 25 mm line x 19 mm Branch 25 1.24 Male Threaded Tees 1011030 13 mm Barbed x 15 mm BSP Male Threaded Tee 25 0.96 1011033 19 mm Barbed x 15 mm BSP Male Threaded Tee 25 0.59 1011034 19 mm Barbed x 20 mm BSP Male Threaded Tee 25 1.22 1011036 25 mm Barbed x 15 mm BSP Male Threaded Tee 25 1.30 1011037 25 mm Barbed x 20 mm BSP Male Threaded Tee 20 1.37 1011038 25 mm Barbed x 25 mm BSP Male Threaded Tee 25 1.30 Female Threaded Tees 1011048 13 mm Barbed x 15 mm BSP Female Threaded Tee 25 1.77 1011049 19 mm Barbed x 15 mm BSP Female Threaded Tee 25 1.62 1011039 25 mm Barbed x 15 mm BSP Female Threaded Tee 25 2.16 Page 43

Bulk Polyethylene Fittings Joiners/Adaptors 1011040 4 mm Adaptor, screwed both ends 100 0.09 1011041 4 mm Barbed Off-Take (Joiner) 100 0.09 1011055 4mm Barb/Thread Adaptor 100 0.12 1011047 5 mm Barbed Off-Take (Joiner) 50 0.51 1011057 5 mm x 10 mm Barbed Off-Take (use 1146 Punch) 50 0.31 1011042 10 mm Barbed Joiner 25 1.17 1011043 13 mm Barbed Joiner 25 0.30 1011044 16 mm Barbed Joiner 25 1.50 1011045 19 mm Barbed Joiner 25 0.37 1011046 25 mm Barbed Joiner 25 0.63 Reducing Joiners 1011050 13 mm x 10 mm Barbed Reducing Joiner 25 0.80 1011051 16 mm x 13 mm Barbed Reducing Joiner 25 1.72 1011052 19 mm x 13 mm Barbed Reducing Joiner 25 0.32 1011053 19 mm x 16 mm Barbed Reducing Joiner 25 2.50 1011054 25 mm x 19 mm Barbed Reducing Joiner 25 0.74 Crosses 1011058 4 mm Barbed Cross 50 0.53 1011059 13 mm Barbed Cross 25 0.92 1011076 25 mm Barbed Cross 25 2.94 Elbows 1011069 4 mm Barbed Elbow 50 0.31 1011071 13 mm Barbed Elbow 25 0.30 1011073 19 mm Barbed Elbow 25 0.48 1011074 25 mm Barbed Elbow 25 0.78 Male Threaded Elbows 1011080 13 mm Barbed x 15 mm BSP Male Threaded Elbow 25 0.92 1011083 19 mm Barbed x 15 mm BSP Male Threaded Elbow 25 0.53 1011084 19 mm Barbed x 20 mm BSP Male Threaded Elbow 25 1.13 1011085 19 mm Barbed x 25 mm BSP Male Threaded Elbow 20 2.40 1011086 25 mm Barbed x 15 mm BSP Male Threaded Elbow 25 1.28 1011087 25 mm Barbed x 20 mm BSP Male Threaded Elbow 25 1.43 1011088 25 mm Barbed x 25 mm BSP Male Threaded Elbow 25 1.20 Female Threaded Elbows 1011096 13 mm Barbed x 15 mm BSP Female Threaded Elbow 25 1.82 1011097 19 mm Barbed x 15 mm BSP Female Threaded Elbow 25 1.69 1011092 25 mm Barbed x 15 mm BSP Female Threaded Elbow 25 1.70 Page 44

Bulk Polyethylene Fittings Threaded Corner Elbow 1011104 19 mm x 15 mm BSP Male Threaded Corner Elbow 25 0.83 1011112 19 mm x 20 mm BSP Male Threaded Corner Elbow 25 2.79 1011110 19 mm x 15 mm BSP Female Threaded Corner Elbow 25 3.07 End Plugs 1011098 13 mm End Plug Barbed 20 0.30 1011089 16 mm End Plug Barbed 20 1.65 1011099 19 mm End Plug Barbed 20 0.38 1011090 25 mm End Plug Barbed 20 0.55 Taps 1011100 4 mm Threaded In-Line Tap 50 1.00 1011102 4 mm Barbed Veri-Flow Tap 50 1.00 1011101 13 mm In-Line Barbed Tap 20 2.25 1011103 19 mm In-Line Barbed Tap 20 4.22 10145505 13 mm In-Line Barbed Tap (Green Back) 20 2.64 10145515 16 mm In-Line Barbed Tap (Green Back) 20 3.73 10145525 19 mm In-Line Barbed Tap (Green Back) 20 5.99 1011105 25 mm In-Line Barbed Tap (Green Back 45545) 20 7.79 Poly Tube Connectors 1011006 Poly Tube Connector 13mm 50 2.81 1011106 Snap-Sure Tap Connector x 13 mm Tube 10 4.59 1011108 Snap-Sure Tap Connector x 19 mm Tube 10 4.11 1011107 13 mm Barb to Snap-On Hose Adaptor 20 0.57 1011109 19 mm Barb to Snap-On Hose Adaptor 20 0.68 Punches 1011141 Punch -Domestic Drippers 4 mm 25 0.77 101P3 Hole Punch for 4mm Fittings 1 12.57 101P4 Hole Punch for 5mm Fittings 1 12.55 101P5 Hole Punch for DT0813 Fittings 1 22.51 101UP3 Universal Punch for 4mm Barbs for 13mm - 32mm Poly 1 117.71 101UP4 Universal Punch for 5mm Barbs for 13mm - 32mm Poly 1 117.71 101LFC16 Lay Flat Hole Cutter 5/8" (16mm) 1 400.30 101INSERTER Micro Fitting Insertion Tool 1 157.58 Mounting Clips 1011163 4 mm Mounting Clip 100 0.25 1011149 13 mm Mounting Clip 100 0.39 1011155 13 mm Saddle Clamps 100 0.18 1011162 19 mm Saddle Clamps 100 0.21 Page 45

Bulk Polyethylene Fittings Ratchet (Cray) Clamps and Saddle Clamps 1011151 Ratchet Clamp to suit 13 mm Lateral Tube 100 0.17 10144305 Antelco Ratchet Clamp #15 to suit 13mm Lateral Tube 100 0.22 10144335 Antelco Ratchet Clamp #18 to suit 16 mm Lateral Tube Tube 100 0.26 1015655 Ratchet Clamp to suit 16mm Drip In 100 0.23 10144345 Antelco Ratchet Clamp #17 to suit 17mm Drip Lines 100 0.31 1011153 Ratchet Clamp to suit 19 mm Lateral Tube & 20mm Drip-In 100 0.21 10144315 Antelco Ratchet Clamp #22 to suit 19mm Lateral Tube 100 0.26 1011154 Ratchet Clamp to suit 25 mm Lateral Tube 100 0.42 10144325 Antelco Ratchet Clamp #28 to suit 25 mm Lateral Tube 100 0.42 8mm Stainless Steel Cobra Clips for Poly Tube and Drip-In 101C11.5 Cobra Clip 12.0-13.5mm (10mm Lateral) 100 1.31 101C15 Cobra Clip 15.5-17.0mm (13mm Lateral) 100 1.35 101C16 Cobra Clip 15.5-17.0mm (16mm Drip-In) 100 1.84 101C17 Cobra Clip 17.5-19.0mm (16mm Lateral) 100 1.38 101C18 Cobra Clip 18.5-20.0mm (18mm Drip-In) 100 1.44 101C20 Cobra Clip 20.5-22.0mm (20mm Drip-In) 100 1.88 101C27 Cobra Clip 27.5-29.0mm (25mm Lateral) 100 2.05 101CHT Clamping Tool 1 186.46 Repair Plugs 1011159 Sealing Plug (Goof Plug) - 4 mm 100 0.06 FPG02 Double Sided Sealing Plug (Goof Plug) - 5mm x 8mm 100 0.21 Off-Takes DT0813C 13mm Lateral x 8mm Barb Take Off For Drip-Eze 25 0.47 ET0813C 13mm Lateral x 8mm Barb Take Off Elbow for Drip-Eze 25 0.47 1011057 5 mm x 10 mm Barbed Off-Take (use 1146 Punch) 50 0.31 1011160 10 mm Compression Off-Take 50 0.39 1011170 10 mm Grommet Off-Take complete (11mm Drill) 50 0.98 Antelco Expando Off-Takes 10145605 13mm Expando Off-Take 50 1.02 10145665 19mm Expando Off-Take 50 1.37 10145685 19mm Expando x 25mm Off-Take 50 2.68 Top Hat Grommets 10145735 Rubber Top Hat Grommet 13mm 100 0.53 10145745 Rubber Top Hat Grommet 16mm 100 1.26 10145755 Rubber Top Hat Grommet 19mm 100 0.80 CURLY-CLIP CC02-1000 Curly-Clip #2 Suits 16mm - 19mm OD Tube 1000 127.00 Ground Staples GS125 Ground Staple 125mm Galvanised 200 0.24 GS230 Ground Staple 230mm Galvanised 200 0.40 Page 46

Drip-Loc R Compression Polyethylene Fittings Drip-Loc Tees (complete with rings) 1011201 13 mm Drip-Loc Tee 25 1.28 1011203 19 mm Drip-Loc Tee 25 1.99 Drip-Loc Threaded Tees (complete with rings) 1011206 19 mm Drip-Loc Tee x 15 mm BSP Male Threaded Tee 25 1.89 Drip-Loc Joiners (complete with rings) 1011210 10 mm Drip-Loc Joiner 25 0.76 1011211 13 mm Drip-Loc Joiner 25 0.79 1011212 16 mm Drip-Loc Joiner 25 1.51 1011213 19 mm Drip-Loc Joiner 25 1.30 1011214 25 mm Drip-Loc Joiner 25 1.66 Drip-Loc Reducing Joiners (complete with rings) 1011216 13 x 10 mm Drip-Loc Reducing Joiner 25 1.45 1011217 16 x 13 mm Drip-Loc Reducing Joiner 25 1.47 1011218 19 x 13 mm Drip-Loc Reducing Joiner 25 1.11 1011219 25 x 19 mm Drip-Loc Reducing Joiner 25 2.10 Drip-Loc Threaded Elbow (complete with rings) 1011221 Drip-Loc Elbow 19 mm x 15 mm BSP Male 25 2.13 Drip-Loc End Stops 1011231 13 mm Drip-Loc End Stop 50 0.35 1011233 19 mm Drip-Loc End Stop 25 0.52 Drip-Loc Take-Offs (complete with rings) 1011191 13 mm Drip-Loc Grommet Take-Off Complete (16mm Hole) 50 1.64 1011192 16 mm Drip-Loc Grommet Take-Off Complete (22mm Hole) 25 2.19 1011193 19 mm Drip-Loc Grommet Take-Off Complete (22mm Hole) 25 2.07 1011194 25 mm Drip-Loc Grommet Take-Off Complete (33mm Hole) 25 2.91 Grommets for Drip-Loc Take-Offs 1011196 13 mm Curved GTO Rubber 25 0.91 1011198 16, 19 mm Curved GTO Rubber 25 1.34 1011199 25 mm Curved GTO Rubber 25 2.11 Technical Information Fast and easy to install Drip-Loc R Grommet Off-Takes are used for connecting polyethylene tubing to upvc submains. Submain wall thickness to be between 2.2mm and 4.0mm Minimum Poly Lateral wall thickness of 1.0 mm is required for suitable connection. Installation Tip: Use only slow speed hand drills. Do NOT use high speed drills. Note: 13mm DRIP-LOC fittings can be used with 16mm Drip-In, 16mm DRIP-LOC fittings can be used with 18mm Drip-In and 19mm DRIP-LOC fittings can be used with 20mm Drip-In Page 47