2 -series
-series -series -series sets standards! hen it comes to functional perfection even in details, eidmüller s -series defines the market standards for many years now! The -series comprises producte for conductor cross-sections between.5 and 300 mm 2 which can be used for all important electrical applications (connecting, protecting, disconnecting, measuring...). Especially in the following fields the - series plays a major role: Industrial automation Building control Transport technology Process control Steady progress! In the range of screw-connection terminals, no other product assortment available on the market has made such consequent improvements and has taken up new developments as the -series! This success is reflected by our current new developments: PE.5/ R3.5 (prot. conductor terminals) extension of the slimmest product familye (3.5 mm) for TS 5 available on the market DU 4N (feed-through terminals) PE 4N (prot. conductor terminals) Extension of the range of "compact design" terminals, which are especially conceived for confined spaces DU 0ZR (feed-through terminals) PE 0ZR (prot. conductor terminals) 0 mm 2 terminal with in total 4 mm 2 connection for measuring and control applications DU 240 (feed-through terminals) Acc. to clamping yoke principle for all nominal cross-sections. DU 50 / DU 95 under preparation F 6-2 (stud terminals) New assortment of single-stud terminals in emid (V0) and up to 2300 V ST 4000 (stud terminals) New range of double-stud terminals with a rated voltage of V0 and 4000 V, in particular suitable for railway applications. eidmüller is the only supplier of stud terminals in the range 0 4000 V. hat is more, all products currently available are continuously improved to fulfill the demands of our customers. Examples: PE 2.5 / PE 4 DK 2.5 F product range NT 2.5 -series offers advantages The -series provides the highest number of advantages compared to all other screw-connection terminals currently available! ) Easy project planning matching contour dimensions between.5 6 mm 2 in standard design uniform accessories for different crosssection ranges (DU 2.5 to DU 6) convenient terminal marking options thanks to two marking systems, S / DEK special design of clamping units for connection of 2 conductors (see chapter Accessories /page 3) Optional selection between standard design with all features and the spacesaving compact design for feed-through terminals 2) Maximum safety level emid insulating materiai best tracking index - non-tracking CTI 600 temperature-resistant up to 20 C - no derating up to 75 C self-extinguishing V0 according to no harmful substances safe from finger-touch (according to VGB 4) Best contact reliability thanks to patented clamping yoke system 2 conductors of the same cross-secttion can be connected in EEx e no ferrules necessary large gas-tight contact low voltage drop highly flexible conductors connectable high contact force 00 % vibration-proof no retightening of clamping screws required 3) Time-saving potential distribution with pluggable cross-connection system (ZQV) 40 % of all terminals are cross-connected! eidmüller offers the screw cross-connection system QV and the pluggable cross-connection system ZQV. The cross-connection system ZQV can be usefd for 75 % of all applications (feedthough and double-deck terminals 2.5 and 4 mm 2, disconnect-test and fuse terminals). parallel routing of 2 or 3 potentials (DU 2.5 and DU 4) easy extension coloured marking safe from finger-touch (VGB 4) faster mounting than screw-type cross-connections 4) Easy mounting ergonomical design through recessed grips snap-on and removal possible on both sides funnel-shaped wire insertion aperture no ferrules required self-centering on TS 35 5) Convenient testing options use of contact-proof test socket screw, partially also for mounted crossconnections QV safe locking on terminal support with test adadpter TA 3
Feed-through terminals Standard design DU 2.5 ZQV DU 4 ZQV DU 6 Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / gauge pin iaw. 60 947- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Dark beige emid Blue emid Orange PA Block of 0 terminals, print. mark. 9 emid Block of 0 terminals, unprint. mark. neutral 9 emid End plate/partition Dark beige emid Blue emid Dark beige emid AP (thickn..5 mm) T Blue emid A/4 mm 2 5/60/47 0 mm/m 2.5/3.5 x 0.6 800 V/24 A/2.5 mm 2 0.4 0.8.5 4 ) 0.3 4 A 3 /24 /24 600 V/25 A/22 2 AG 600 V/20 A/26 2 AG DU 2.5 020000000 00 DU 2.5 020080000 00 DU 2.5 020060000 00 DU 2.5/0 020700000 0 DU 2.5/0 020800000 0 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 T2.5-0 05000000 20 T2.5-0 05080000 20 4 A/6 mm 2 57 A/0 mm 2 6/60/47 0 mm/m 3/3.5 x 0.6 800 V/ A/4 mm 2 0.5.0 2.5 6 0.3 6 A 4 8/60/47 2 mm/m 3.5/4.0 x 0.8 800 V/4 A/6 mm 2 0.8.4 3 0.5 0.5 0 0.5 0 0.5 0 0.5 0 A 5 4/ 4/ 600 V/35 A/22 0 AG 600 V/35 A/26 0 AG 57/57 57/57 600 V/45 A/20 8 AG 600 V/45 A/20 8 AG DU 4 02000000 00 DU 6 020200000 00 DU 4 02080000 00 DU 6 020280000 00 DU 6 02400000 0 DU 4/0 020900000 0 DU 6/0 02300000 0 DU 4/0 02000000 0 AP 2.5-0 050000000 50 AP2.5-0 050000000 50 AP 2.5-0 050080000 50 AP2.5-0 050080000 50 T 2.5-0 05000000 20 T2.5-0 05000000 20 T 2.5-0 05080000 20 T2.5-0 05080000 20 Cross-connection 2-pole QV ZQV 3-pole 4-pole 5 9-pole 0-pole QB 2/24 50 and/or 4-pole Cross-connection comb LS 2.8 Screening bar Notching tool Test adapter TA TA Strain relief Test plug/socket (safe from finger-contact 4) ) PS 2.3 Test plug (ø2.3 mm) Test plug (ø4.0 mm) Test socket screw 8.5 (ø2.3 mm) StB 8.5 Test socket screw 4 (ø4.0 mm) Covers Group marking ith symbol hite AD for self-labelling/white GB T5 Tag carrier for S 0 markers QV Qty. ZQV Qty. 053660000 50 693800000 60 053760000 50 69380000 60 053860000 50 693820000 60 QV see p. 262 / ZQV see p. 263 054460000 20 693880000 20 50-pole: 693890000 0 QB B/24 579060000 20 LS 2.8 2) 056400000 50 A 9004500000 TA 2 60000 50 TA 2/ZA 6330000 50 TA 2/0 6340000 5 ZE 650000 50 PS 2.3 080400000 20 StB 8.5 025700000 50 AD 5 053460000 50 AD 5 white 056060000 50 GB 5 050760000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 DEK Standard S white neutral S 2/5 609860000 720 DEK S S indiv. printed S 2/5 773380000 300 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diam. for terminals with 5 mm pitch: 2 )hen using the screen plug, rated voltage is Cat. No. 33300000 reduced to 400 V! QV Qty. ZQV Qty. 05960000 50 758250000 60 054560000 50 762630000 60 054660000 50 762660000 60 QV see p. 262 / ZQV see p. 263 05206000 20 758260000 20 4-pole: 758270000 0 QB A/24 579000000 20 LS 2.8 2) 056400000 50 A 9004500000 TA 3 6350000 50 TA 3/ZA 6360000 50 TA 3/0 6370000 5 ZE 650000 50 PS 2.3 080400000 20 StB 8.5 0280600000 50 AD 5 053460000 50 AD 5 white 056060000 50 DEK 6 S 2/6 609900000 600 S 2/6 60990000 20 3 ) Finger-safe StB 2.6 07000000 (ø 4 mm) can also be used with QV QV Cat. No. Qty. QV 6/2 3) 052360000 50 QV 6/3 3) 054760000 50 QV 6/4 3) 054860000 50 see p. 262 QV 6/0 3) 052260000 20 LS 2.8 2) 056400000 50 A 9004500000 TA 5/ 05260000 25 PS 2.3 080400000 20 PS4 0299600000 20 StB 8.5 0280600000 50 StB 4 069900000 50 AD 8 053560000 50 AD 8 white 05660000 50 GB 8 050960000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 DEK 8 S 2/6.5 609920000 540 S 2/6.5 609930000 08 4 ) Finger-safe StB 07000000 can be used for DU 2.5/DU 6 4
Feed-through terminals Standard design DU 0 DU 6 DU 6/ZA 3) DU 35 DU 35/ZA 3) -series Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / gauge pin iaw. 60 947- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Dark beige emid Blue emid Dark beige emid Blue emid End plate/partition Dark beige emid Blue emid Dark beige emid AP (thickn..5 mm) T Blue emid Cross-connection 2-pole QV 3-pole 4-pole 5 9-pole 0-pole 2-pole Blue Cross-connection comb LS 2.8 Screening bar Notching tool Test adapter TA 76 A/6 mm 2 0/60/47 2 mm/m 4/5.5 x.0 000 V/57 A/0 mm 2.2 2.4 4.5 6.5 6 (6 mm 2 with 2.4 ).5 6.5 6.5 6.3 6 B 6 6/60/63 8 mm/m 6/6.5 x.2 000 V/25 A/35 mm 2 2.5 5.0 / 3.0 6.0 4) Conductor Strips 2.5 6 3 x 9 x 0.8 2.5 50 (with 4 ) 6 x 9 x 0.8 2.5 35 9 x 9 x 0.8 2.5 35 2.5 35 2.5 50 B 9 38/- 2/- 600 V/5 A/2 2 AG 600 V/20 A/2 2 AG with pip 3) Qty. Cat. No. Qty. DU 35 028800000 25 020500000 40 DU 35 028880000 25 020580000 40 DU 35 029000000 25 020600000 25 Hex. socket Hex. socket DU 35 029080000 25 020680000 25 76/- 63/- 600 V/60 A/6 6 AG 600 V/65 A/6 6 AG DU 0 020300000 50 DU 0 020380000 50 AP2.5-0 050000000 50 AP2.5-0 050080000 50 T2.5-0 05000000 20 T2.5-0 05080000 20 QV 0/2 052560000 50 QV 0/3 054960000 50 QV 0/4 055060000 50 QV see p. 262 QV 0/0 052460000 20 LS 2.8 2) 056400000 50 A 9004500000 TA 5/ 05260000 25 0 A/25 mm 2 50 A/50 mm 2 2/60/63 6 mm/m 5/5.5 x.0 000 V/76 A/6 mm 2 2.0 4.0.5 6.5 25.5 25.5 6.5 6.5 25 B 7 0/- 76/- 600 V/70 A/4 6 AG 600 V/65 A/4 6 AG *with pip Cat. No. Qty. DU 6 028900000 020400000 50 DU 6 028980000 020480000 50 AP 6 35 05000000 20 AP 6 35 05080000 20 QV 6/2 0560000 50 QV 6/3 05560000 50 QV 6/4 055260000 50 QV see p. 262 QV 6/0 053360000 0 QV6/2Blue 0580000 50 A 9004500000 Hex. socket Hex. socket AP 6 35 05000000 20 AP 6 35 05080000 20 QV 35/2 053060000 50 QV 35/3 055360000 50 QV 35/4 055460000 50 QV see p. 262 QV 35/0 05360000 0 QV 35/2 Blue 053080000 50 A 9004500000 TA Strain relief Test plug/socket (safe from finger-contact ) ) PS 2.3 Test plug (ø2.3 mm) Test plug (ø4.0 mm) Test socket screw 8.5 (ø2.3 mm) StB 8.5 Test socket screw 4 (ø4.0 mm) Covers Group marking ith symbol white AD for self-labelling/white GB T5 Tag carrier for S 0 markers PS2.3(ø2.3) 080400000 20 PS4 (ø4) 0299600000 20 StB8.5(ø2.3) 0280600000 50 StB4 (ø 4) 069900000 50 AD 8 053560000 50 AD 8white 05660000 50 GB 8 050960000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 DEK Standard S white neutral S 2/6.5 609920000 540 DEK S S indiv. printed S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials ) Finger-safe test socket screw 07000000 can be used for DU 0 2 ) hen using the screening bar, rated voltage is reduced to 400 V! PS 4 (ø 4) 0299600000 20 StB 6 (ø 4) 040200000 50 AD 2 055960000 50 AD2white 056260000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S 2/6.5 609920000 540 S 2/6.5 609930000 08 3) with pip instead of terminal block = higher stability when linked PS 4 (ø 4) 0299600000 20 StB6 (ø 4) 040200000 50 AD 2 055960000 50 AD2white 056260000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S 2/6.5 609920000 540 S 2/6.5 609930000 08 4 ) Tightening torque for variant with hexagonal socket 5
Feed-through terminals Standard design DU.5/ZZ DU 2.5/.5/ZR ZQV DK 2.5/ZQV DK 2.5 400 V ZQV Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / gauge pin iaw. 60 947- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Dark beige emid Blue emid Orange PA Block of 0 terminals, print. mark. 9 emid Block of 0 terminals, unprint. mark. neutral 9 emid End plate/partition Dark beige emid Blue emid Dark beige emid AP (thickness.5 mm) T Blue emid 23 A/2.5 mm 2 a r i q # LR u 5/60/47 7 mm/m 2.5/3.5 x 0.6 800 V/7.5 A/.5 mm 2.5 2.5 0.5.5 0.5.5 0.5.5 0.08 2.5 A /24 /24 300 V/0 A/22 4 AG 300 V/0 A/26 4 AG DU.5 ZZ 03400000 00 DU.5 ZZ 03480000 00 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 T2.5-0 05000000 20 T2.5-0 05080000 20 A/4 mm 2 5/60/47 0/7 mm/m 2.5/3.5 x 0.6 Twin connection 800 V/24 A//2.5 mm 2 800 V/7.5 A/.5 mm 2.5 4.5 2.5 0.5.5 / 0.5.5 ) 0.5.5 0.3 4 A3 0.08 2.5 A /24 /24 300 V/20A/5 A 3) /22 2 AG 300 V/20A/5 A 3) /26 2/4 3) AG DU 2.5/.5 ZR 024700000 00 DU 2.5/.5 ZR 024780000 00 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 T2.5-0 05000000 20 T2.5-0 05080000 20 A/4 mm 2 a r i # LR u DNV 5/69/63 0 mm/m 2.5/3.5 x 0.6 400 V/24 A/2.5 mm 2.5 4 ) 0.3 4 A 3 /24 /24 300 V/20 A/22 2 AG 300 V/0 A/26 2 AG QV Qty. ZQV Qty. 02500000 00 0400000 00 02580000 00 0480000 00 02560000 00 025600000 0 02560000 0 025700000 0 AP 05900000 20 AP 05980000 20 T 058800000 20 Cross-connection 2-pole QV ZQV 3-pole 4-pole 5 9-pole 0-pole QB 2/24 50-pole Cross-connection comb LS 2.8 Screening bar Notching tool Test adapter TA TA Strain relief Test plug/socket PS 2.3 Test plug (ø2.3 mm) Test plug (ø4.0 mm) Test socket screw 8.5 (ø2.3 mm) StB 8.5 Test socket screw 4 (ø4.0 mm) Covers Group marking ith symbol white AD for self-labelling/white GB T5 Tag carrier for S 0 markers DEK Standard QV Qty. ZQV Qty. 053660000 50 053760000 50 053860000 50 QV see p. 262 054460000 20 QB B/24 579060000 20 LS 2.8 2) 056400000 50 A 9004500000 TA 2 60000 50 TA 2/ZA 6330000 50 TA 2/0 6340000 5 ZE 650000 50 PS 2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 AD 4 072000000 50 AD 4 white 07200000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 QV Qty. ZQV Qty. 053660000 50 693800000 60 053760000 50 69380000 60 693820000 60 053860000 50 QV see p. 262 / ZQV see p. 263 054460000 20 693880000 20 693890000 0 QB B/24 579060000 20 LS 2.8 2) 056400000 50 A 9004500000 TA 2 60000 50 TA 2/ZA 6330000 50 TA 2/0 6340000 5 ZE 650000 50 PS2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S white neutral S 2/5 609860000 720 S 2/5 609860000 720 DEK S S indiv. printed S 2/5 773380000 300 S 2/5 773380000 300 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diam. for terminals with 5 mm pitch: 2) hen using the screen plug, rated voltage is reduced to 400 V! Cat. No. 33300000 3) Twin connection QV Qty. ZQV Qty. 053660000 50 693800000 60 053760000 50 69380000 60 053860000 50 693820000 60 QV see p. 262 / ZQV see p. 263 054460000 20 693880000 20 693890000 0 QB B/24 579060000 20 LS 2.8 2) 056400000 50 A 9004500000 TA 0535860000 20 PS2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 ADP 3 0485400000 20xm HP 3 0485760000 20 AD 4 072000000 50 T 4 34060000 00 SF 0 03400000 000 SG 0 03500000 000 S 8/5 640740000 720 S 8/5 773360000 300 6
Feed-through terminals Standard design DK 2.5 800 V DK 2.5V / DK 2.5DU-PE DU 0 ZR -series Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / gauge pin iaw. 60 947- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Dark beige emid Blue emid Dark beige emid End plate/partition Dark beige emid Blue emid Dark beige emid AP (thickness.5 mm) T Blue emid Frame DK 2.5 Cross-connection 2-pole QV ZQV 3-pole 4-pole 5 9-pole 0-pole QB 2/24 50-pole Cross-connection comb LS 2.8 Screening bar Notching tool Test adapter TA TA Strain relief Test plug/socket PS 2.3 Test plug (ø2.3 mm) Test plug (ø4.0 mm) Test socket screw 8.5 (ø2.3 mm) StB 8.5 Test socket screw 4 (ø4.0 mm) Covers Group marking ith symbol white AD for self-labelling/white GB T5 Tag carrier for S 0 markers A/4 mm 2 i q # LR u DNV 6/69/63 0 mm/m 2.5/3.5 x 0.6 800 V/24 A/2.5 mm 2.5 4 0.3 4 A 3 / / DK 2.5 02900000 00 AP 05900000 20 AP 05980000 20 T 058800000 20 Q 2 0369000000 50 Q 3 036900000 50 Q 4 0369200000 50 see p. 272 274 Q 0 0369300000 20 LS 2.8 2) 056400000 50 TA 0535860000 20 PPS2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 ADP 3 048540000 20 x m HP 3 0485760000 20 AD 4 072000000 50 T 4 34060000 00 SF 0 03400000 000 SG 0 03500000 000 DEK Standard S white neutral S 8/5 640740000 720 DEK S S indiv. printed S 8/5 773360000 300 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 24 A/2.5 mm 2 a r q # LR u 5/69/63 0 mm/m 2.5/3.5 x 0.6 400 V/24 A/2.5 mm 2.5 4 ) 0.3 4 A 3 / / 300 V/20 A/22 2 AG 300 V/0 A/26 2 AG DK 2.5 V 022300000 00 DK 2.5 V 022380000 00 DK 2.5 DU-PE* 036400000 00 *lower connection level marked in green-yellow AP 05900000 20 T 058800000 20 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV see p. 262 QV2.5/0 054460000 20 QB A/24 579000000 20 A 9004500000 TA 0535860000 20 PS2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 ADP 3 048540000 20 x m HP 3 0485760000 20 AD 4 072000000 50 T 4 34060000 00 SF 0 03400000 000 SG 0 03500000 000 2) hen using the screen plug, rated voltage is reduced to 400 V! 3) 6 mm 2 with 2.4 S 8/5 640740000 720 S 8/5 773360000 300 76 A / 6 mm 4 A / 6 mm 0/70/49.5 Twin connection 2 mm/m4/5.5 x 0 9 mm/m3/3.5 x 0.6 800 V/57 A/0 mm 2 800 V/ A/4mm 2.2 2.4 0.5.0 4 2.5 6.5 6 3).5 6.5 6.5 6.3 6 4/ 4/.5 4 0.2 6 Approval pending Approval pending DU 0 ZR 042400000 50 DU 0 ZR 042480000 50 QV 0/2 052560000 50 QV 0/3 054960000 50 QV 0/4 055060000 50 QV see p. 262 TA 5/ 05260000 25 PS2.3 (ø 2.3) 080400000 20 PS4 (ø 4) 0299600000 20 StB8.5 (ø 2.3) 025700000 50 StB4 (ø 0.4) 0669900000 50 GB 8 050960000 50 TS 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S 2/6.5 609920000 720 S 2/6.5 609930000 300 7
Feed-through terminals Compact-Design N for low type DU 2.5N ZQV DU 2.5N 600 V DU 4N ZQV Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / gauge pin iaw. 60 947- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Dark beige emid Blue emid Orange PA Block of 0 terminals, print. mark. 9 emid Block of 0 terminals, unprint. mark. neutral 9 emid End plate/partition Dark beige emid Blue emid Dark beige emid Blue emid AP (thickness.5 mm) T Cross-connection 2-pole QV ZQV 3-pole 4-pole 5 9-pole 0-pole 50- bzw 4-pole-pole QB 2/24 Cross-connection comb A/4 mm 2 5/44/37.5 0 mm/m 2.5/3.5 x 0.6 500 V/24 A/2.5 mm 2.5 4 ) 0.3 4 A 3 /24 /24 300 V/20 A/22 2 AG 300 V/20 A/26 2 AG QV Qty. ZQV Qty. 023700000 00 040800000 00 023780000 00 040880000 00 023760000 00 024900000 0 024800000 0 Type Cat.No. Qty. AP-DU2.5 060000000 50 AP-DU2.5 060080000 50 T (.5) 09860000 20 QV Qty. ZQV Qty. 053660000 50 693800000 60 053760000 50 69380000 60 053860000 50 693820000 60 QV see p. 262 / ZQV see p. 263 054460000 20 693880000 20 50-pole 693890000 0 QB B/24 579060000 20 A/4 mm 2 5/44/43.5 0 mm/m 2.5/3.5 x 0.6 800 V/24 A/2.5 mm 2.5 4 ) 0.3 4 A 3 /24 /24 600 V/25 A/26 2 AG 600 V/20 A/26 2 AG QV Qty. 730940000 00 QV Qty. 053660000 50 053760000 50 053860000 50 QV see p. 262 054460000 20 QB B/24 579060000 20 6/44/38.5 0 mm/m 3/3.5 x 0.6 500 V/ A/4 mm 2 0.5.0 2.5 6 0.3 6 A 4 Approval pending Approval pending QV Qty. ZQV Qty. 042600000 00 Type 042680000 00 Cat.No. Qty. AP-DU 2.5N/4N 060000000 50 AP-DU 2.5N/4N 060080000 50 T (.5) 09860000 20 QV Qty. ZQV Qty. 758250000 60 762630000 60 762620000 60 ZQV see p. 263 758260000 60 4-pole 758270000 0 Notching tool Test adapter TA TA Strain relief Test plug/socket PS 2.3 Test plug (ø2.3 mm) Test plug (ø4.0 mm) Test socket screw 8.5 (ø2.3 mm) StB 8.5 Test socket screw 4 (ø4.0 mm) Covers ith symbol white AD for self-labelling/white Group marking A 9004500000 TA 6290000 50 TA /ZA 6300000 50 TA /0 630000 5 ZE 650000 50 PS 2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 AD 4 072000000 50 AD 4 white 07200000 50 A 9004500000 TA 6290000 50 TA /ZA 6300000 50 TA /0 630000 5 ZE 650000 50 PS 2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 AD 4 072000000 50 AD 4 white 07200000 50 TA 6290000 50 TA 0535860000 50 AD 4 072000000 50 AD 4 white 07200000 50 GB T5 Tag carrier for S 0 markers DEK Standard T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S white neutral S 2/5 609860000 720 DEK S S indiv. printed S 2/5 773380000 300 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S 2/5 609860000 720 S 2/5 773380000 300 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 DEK 6 S 2/6 609900000 600 S 2/6 60990000 20 8
Feed-through terminals Compact-Design N for low type DU 6N DU 35N DU 70N -series Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / gauge pin iaw. 60 947- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Dark beige emid Blue emid Orange PA Block of 0 terminals, print. mark. 9 emid Block of 0 terminals, unprint. mark. neutral 9 emid End plate/partition Dark beige emid 0 A/25 mm 2 a r i # 2/60/47 2 mm/m 4/5.5 x.0 690 V/76 A/6 mm 2.2 2.4 4.5 6.5 25 (25 mm with 2.2 ).5 6.5 6.5 6.5 25 B 7 76/- 57 (3 + 4-pole)/- 300 V/70 A/4 6 AG 300 V/45 A/20 8 AG DU 6N 03600000 50 DU 6N BL 03680000 50 T EX 058800000 20 50 A / 50 mm 2 92 A/70 mm 2 a r # 6/66/5 8 mm/m 6/5.5 x.0 500 V/25 A/35 mm 2 2.5 5.0 Conductor Strips 2.5 6 3 x 9 x 0.8 2.5 50 6 x 9 x 0.8 2.5 35 9 x 9 x 0.8 2.5 35 2.5 35 2.5 50 B 9 5/- 00/- 300 V/0 A/2 2 AG 300 V/0 A/2 2 AG DU 35N 040400000 20 DU 35N BL 040480000 20 a r # 20.5/75/86 22 mm/m 8/S 6 DIN 69 000 V/92 A/70 mm 2 6.0 0 Conductor Strips 0 6 3 x 9 x 0.8 0 95 6 x 9 x 0.8 0 70 9 x 9 x 0.8 0 70 0 70 0 95 B 92/- 92 (3-pole)/- 600 V/75 A/6 2/0 AG 600 V/205 A/8 2/0AG DU 70 N/35 95290000 0 DU 70 N/3 BL 952420000 0 (DU 70N only with hexagonal socket) Cross-connection 2-pole QV 6N/2 636560000 50 QV ZQV 3-pole QV 6N/3 636570000 50 4-pole QV 6N/4 636580000 50 5 9-pole see p. 262 0-pole QB 2/24 50-pole Cross-connection comb LS 2.8 Screening bar Notching tool A 9004500000 Test adapter TA TA 2 60000 TA Strain relief Test plug/socket (safe from finger-contact ) ) PS 2.3 Test plug (ø2.3 mm) PS2.3(ø2.3) 080400000 20 Test plug (ø4.0 mm) PS4 (ø4) 0299600000 20 Test socket screw 8.5 (ø2.3 mm) StB8.5(ø2.3) 0280600000 50 StB 8.5 Test socket screw 4 (ø4.0 mm) StB4 (ø 4) 069900000 50 Covers ith symbol AD 2 N 0700000 50 white AD2N white 0790000 50 AD for self-labelling/white Group marking T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 GB T5 Tag carrier for S 0 markers DEK Standard S white neutral S 2/6.5 609920000 540 DEK S S indiv. printed S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials ) Finger-safe StB 07000000 can be used for DU 6N QV 35N/2 079200000 50 QV 35N/3 079300000 50 QV 35N/4 079400000 50 see p. 262 PS 4 (ø 4) 0299600000 20 StB 6 (ø 4) 040200000 50 AD 6 N 083600000 50 AD 6 N white 083500000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S 2/6.5 609920000 540 S 2/6.5 609930000 08 QV 70N/2 952240000 5 QV 70N/3 952250000 5 QV 70N/4 9590000 5 see p. 262 Auxiliary/control conductor terminal ZAD 70N 952280000 0 up to 4 mm 2, A PS 4 (ø 4) 0299600000 20 Pluggable in screw head of connection system AD 20 952260000 20 AD20white 952270000 20 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S 2/6.5 609920000 540 S 2/6.5 609930000 08 9
Feed-through terminals Compact-Design N for low type DK 2.5N ZQV DK 2.5N V ZQV DK 2.5N DU-PE ZQV Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / gauge pin iaw. 60 947- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Dark beige emid Blue emid Orange PA Block of 0 terminals, print. mark. 9 emid Block of 0 terminals, unprint. mark. neutral 9 emid End plate/partition Dark beige emid Blue emid Dark beige emid AP (thickness.5 mm) T 28 A/4 mm 2 5/60/62 8 mm/m 2.5/3.5 x 0.6 800 V/24 A/2.5 mm 2.5 4 0.3 4 A 3 -/24 -/24 600 V/20 A/6 2 AG 300 V/20 A/26 2 AG DK 2.5N 04600000 00 DK 2.5N 04680000 00 DK 2.5N 04660000 00 DK 2.5N/0 04700000 0 DK 2.5N/0 04800000 0 AP 084000000 20 AP BL 084080000 20 T 058800000 20 28 A/4 mm 2 a r i q # LR u 5/60/62 8 mm/m 2.5/3.5 x 0.6 800 V/24 A/2.5 mm 2.5 4 0.3 4 A 3 -/24 -/24 600 V/20 A/6 2 AG 300 V/20 A/26 2 AG DK 2.5N V 0460000 00 AP 084000000 20 AP BL 084080000 20 T 058800000 20 28 A/4 mm 2 5/60/62 8 mm/m 2.5/3.5 x 0.6 800 V/24 A/2.5 mm 2.5 4 0.3 4 A 3 -/24 -/24 600 V/20 A/6 2 AG 300 V/20 A/26 2 AG DK 2.5N DU-PE 04650000 00 lower connection level marked in green-yellow AP 084000000 20 AP BL 084080000 20 T 058800000 20 Cross-connection ZQV Test adapter TA 2-pole 3-pole 4-pole 5 9-pole 0-pole 50-pole QB 2/24 Cross-connection comb LS 2.8 Screening bar ZQV 2.5N/2 693800000 60 ZQV 2.5N/3 69380000 60 ZQV 2.5N/4 693820000 60 ZQV see p. 263 ZQV 2.5N/0 693880000 20 ZQV 2.5N/50 693890000 0 QB B/24 579060000 20 LS 2.8 ) 056400000 50 TA 0535860000 20 ZQV 2.5N/2 693800000 60 ZQV 2.5N/3 69380000 60 ZQV 2.5N/4 693820000 60 ZQV see p. 263 ZQV 2.5N/0 693880000 20 ZQV 2.5N/50 693890000 0 QB B/24 579060000 20 LS 2.8 ) 056400000 50 TA 0535860000 20 ZQV 2.5N/2 693800000 60 ZQV 2.5N/3 69380000 60 ZQV 2.5N/4 693820000 60 ZQV see p. 263 ZQV 2.5N/0 693880000 20 ZQV 2.5N/50 693890000 0 QB B/24 579060000 20 TA 0535860000 20 DEK Standard S white neutral S 8/5 640740000 720 DEK S S indiv. printed S 8/5 773360000 300 Mounting rails, end brackets, further marking materials ) hen using the screen plug, rated voltage is reduced to 400 V! S 8/5 640740000 720 S 8/5 773360000 300 S 8/5 640740000 720 S 8/5 773360000 300 0
Feed-through terminals Compact-Design N for low type DK 4N ZQV DK 4N V ZQV DK 4N DU-PE ZQV -series Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / gauge pin iaw. 60 947- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Dark beige emid Blue emid Orange PA Block of 0 terminals, print. mark. 9 emid Block of 0 terminals, unprint. mark. neutral 9 emid End plate/partition Dark beige emid Blue emid Dark beige emid AP (thickness.5 mm) T 35 A/6 mm 2 6/60/64 8 mm/m 3/3.5 x 0.6 800 V/ A/4 mm 2 0.5.0 2.5 6 0.3 6 A 4 -/ -/ 600 V/35 A/26 0 AG 300 V/35 A/26 0 AG DK 4N 04900000 00 DK 4N 04980000 00 DK 4N 04960000 00 DK 4N 042000000 0 DK 4N 04200000 0 AP 084000000 20 AP BL 084080000 20 T 058800000 20 35 A/6 mm 2 6/60/64 8 mm/m 3/3.5 x 0.6 800 V/ A/4 mm 2 0.5.0 2.5 6 0.3 6 A 4 -/ -/ 600 V/35 A/26 0 AG 300 V/35 A/26 0 AG DK 4N V 0490000 00 AP 084000000 20 AP BL 084080000 20 T 058800000 20 2 35 A/6 mm 6/60/64 8 mm/m 3/3.5 x 0.6 800 V/ A/4 mm 2 0.5.0 2.5 6 0.3 6 A 4 -/ -/ 600 V/35 A/26 0 AG 300 V/35 A/26 0 AG DK 4N DU-PE 04950000 00 lower connection level marked in green-yellow AP 084000000 20 AP BL 084080000 20 T 058800000 20 Cross-connection ZQV 2-pole 3-pole 4-pole ZQV 4N/2 758250000 60 ZQV 4N/3 762630000 60 ZQV 4N/4 762620000 60 ZQV 4N/2 758250000 60 ZQV 4N/3 762630000 60 ZQV 4N/4 762620000 60 ZQV 4N/2 758250000 60 ZQV 4N/3 762630000 60 ZQV 4N/4 762620000 60 0-pole 4-pole ZQV 4N/0 758260000 20 ZQV 4N/4 758270000 0 ZQV 4N/0 758260000 20 ZQV 4N/4 758270000 0 ZQV 4N/0 758260000 20 ZQV 4N/4 758270000 0 Test adapter TA LS 2.8 Screening bar LS 2.8 ) 056400000 50 TA 0535860000 20 LS 2.8 ) 056400000 50 TA 0535860000 20 LS 2.8 ) 056400000 50 TA 0535860000 20 DEK Standard S white neutral S 8/5 640740000 720 DEK S S indiv. printed S 8/5 773360000 300 Mounting rails, end brackets, further marking materials ) hen using the screen plug, rated voltage is reduced to 400 V! DEK 6 S 8/5 640740000 720 S 8/5 773360000 300 DEK 6 S 8/5 640740000 720 S 8/5 773360000 300
Feed-through terminals DU 70/95 Large-size conductors no longer have to be inserted into the clamping unit with force; they can easily be placed in the terminal. For each terminal type, terminal-block variants are available - consisting of three-, four- or five-pole terminals - in addition to the individual terminals. All blocks are permanently screwed together for additional torsional rigidity. Slots provided in the underside of the terminals enable direct fitting. Terminal blocks can be screwed directly to the mounting plates with 25 mm pitch. Further advantages are: Constant force transmission by selfadjusting connection system Random wiring direction Safe from finger-touch (VBG 4), even with cross-connection fitted Extreme distortion resistance Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Insul. strip. length/clamp. screw/wrench size acc. to DIN 69 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Strips mm Strips mm Max. clamping range in mm 2 Gauge pin iaw. 60 947- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. Multi-pole A Hexagonal socket 6 mm Dark beige emid Hexagonal socket 6 mm Blue emid Hexagonal socket 6 mm Green emid Hexagonal socket 6 mm Terminal block ) 3-pole emid Hexagonal socket 6 mm Terminal block ) 4-pole emid Hexagonal socket 6 mm Terminal block ) 5-pole emid Mains terminal block 3 x beige, x blue, x green emid Cross-connection 2 A/95 mm 2 27//08 30 mm/m 8/S 6 000 V/2 A/95 mm 2 6 2 6 6 20 2) 6 95 2) 6 95 2) 6 50 3 x 9 x 0.8 6 x 9 x 0.8 4 x 6 x 0.8 6 x 6 x 0.8 6 20 B 2 2 (3) 2 600 V/75 A/6 2/0 AG 600 V/205 A/6 2/0 AG Cat. No. Qty. DU 70/95 024600000 0 DU 70/95 024680000 0 DU 70/95 024650000 0 QV 70/2 063500000 5 QV 70/3 063600000 5 Open terminal cover and remove screw unit Auxiliary/control conductor terminal Pressure piece 3) ZAD (up to 4 mm 2, A) FL ZAD 70 066000000 0 FL 70/95 66330000 0 Cover Yellow AD 27 ith danger sign 062860000 0 hite AD 27 ithout danger sign 062960000 0 Test plug PS 4 0299600000 20 Pluggable in screw head of connection system Place conductor in terminal and replace screw unit Fixing screw For direct fitting M 6x6 063700000 20 Hexagon wrench SK wrench 0407900000 6 mm acc. to DIN 69 Screwdriver for direct fitting x 5.5 x 25 SDI 900840000 Close cover and tighten screw with hexagon wrench DEK Standard S white neutral DEK S S indiv. printed Mounting rails, end brackets, further marking materials ) Terminal block for direct fitting only 2) Using 95 and 20 mm 2 with 0 tightening torque S 2/6.5 609920000 540 S 2/6.5 609930000 08 3) The FL pressure piece is needed when the flat strip, cannot be inserted centrically 2
Feed-through terminals DU 70/95/ DU 20/50 DU 20/50/ -series Drill template for direct fitting 2 A/95 mm 2 8//08 (block of 3)* 30 mm/m 8/S 6 309 A/50 mm 2 //8 35 mm/m 0/S 6 Drill template for direct fitting 309 A/50 mm 2 96//8 (block of 3)* 35 mm/m 0/S 6 000 V/2 A/95 mm 2 000 V/269 A/20 mm 2 000 V/269 A/20 mm 2 6 2 0 20 0 20 6 6 20 2) 6 95 2) 6 95 2) 6 50 3 x 9 x 0.8 6 x 9 x 0.8 4 x 6 x 0.8 6 x 6 x 0.8 6 20 B 2 2 (3) 2 35 50 35 50 35 95 35 50 3 x 9 x 0.8 6 x 9 x 0.8 4 x 6 x 0.8 6 x 6 x 0.8 35 50 B 3 292 (3) 292 35 50 35 50 35 95 35 50 3 x 9 x 0.8 6 x 9 x 0.8 4 x 6 x 0.8 6 x 6 x 0.8 35 50 B 3 292 (3) 292 600 V/75 A/6 2/0 AG 600 V/205 A/6 2/0 AG DU 70/95/ 026700000 ) 4 DU 70/95/ 026800000 ) 3 DU 70/95/ 026900000 ) 2 DU 70/95/ 0300000 ) 2 QV 70/2 063500000 5 QV 70/3 063600000 5 600 V/225 A/2 250 kcmil AG 600 V/285 A/2 250 kcmil AG Cat. No. Qty. DU 20/50 024500000 0 DU 20/50 024580000 0 DU 20/50 024550000 0 QV 20/2 063300000 5 QV 20/3 063400000 5 600 V/225 A/2 250 kcmil AG 600 V/285 A/2 250 kcmil AG DU 20/50/ 026400000 ) 3 DU 20/50/ 026500000 ) 2 DU 20/50/ 026600000 ) 2 DU 20/50/ 0400000 ) 2 QV 20/2 063300000 5 QV 20/3 063400000 5 ZAD 70 066000000 0 FL 70/95 66330000 0 ZAD 20 06600000 0 FL 20/50 66340000 0 ZAD 20 06600000 0 FL 20/50 66340000 0 AD 27 ith danger sign 062860000 0 AD 27 ith danger sign 062860000 0 AD 27 ith danger sign 062860000 0 AD 27 ithout danger sign 062960000 0 AD 27 ithout danger sign 062960000 0 AD 27 ithout danger sign 062960000 0 PS 4 0299600000 20 Pluggable in screw head of connection system PS 4 0299600000 20 Pluggable in screw head of connection system PS 4 0299600000 20 Pluggable in screw head of connection system M 6x6 063700000 20 M 6x6 063700000 20 M 6x6 063700000 20 SK wrench 0407900000 6 mm acc. to DIN 69 SK wrench 0407900000 6 mm acc. to DIN 69 SK wrench 0407900000 6 mm acc. to DIN 69 SDI 900840000 SDI 900840000 SDI 900840000 S 2/6.5 609920000 540 S 2/6.5 609930000 08 S 2/6.5 609920000 540 S 2/6.5 609930000 08 S 2/6.5 609920000 540 S 2/6.5 609930000 08 ) Terminal block for direct fitting only 2) Using 95 and 20 mm 2 with 0 tightening torque 3
Stud terminals F 6 F 8 F 0 F 2 4 mm 2 mm 28 mm 23 mm Max. technical data Dimensions / approvals idth/length/height with TS 35 x 7 Pitch with partition Stud size mm mm 25 A/35 mm 2 a r i 9.6 / 67 / 56 8 M6 50 A/50 mm 2 a r i 24.6 / 67 / 65 23 M8 265 A/20mm 2 a r i 35.6 / 67 / 74 34 M0 265 A/20mm 2 a r i 35.6 / 67 / 72 34 M2 Rated data Rated impulse voltage/pollution severity ) Rated impulse voltage/pollution severity 2) 000 V ) / - / - 2.300 V 2) / - / - 8 kv / 3 2 kv / PD 3 000 V ) / - / - 2.300 V 2) / - / - 8 kv / 3 2 kv / PD 3 000 V ) / - / - 2.300 V 2) / - / - 8 kv / 3 2 kv / PD 3 000 V ) / - / - 2.300 V 2) / - / - 8 kv / 3 2 kv / PD 3 3... 6 6... 2 0... 20 4... 3 DIN 46234 / number per side ) DIN 46235 / number per side ) DIN 46234 / number per side 2) DIN 46235 / number per side 2)...35 / 2...25 / 2...35 /...25 /...50 / 2...35 / 2...50 /...35 /...20 / 2... 95 / 2...20 /... 95 /...20 / 2... 95 / 2...20 /... 95 / 000 V/5 A/4 2 AG 000 V/50 A/4 2 AG 000 V/5 A/4 /0 AG 000 V/200 A/4 /0 AG 000 V/255 A/0 250 kcmil AG 000 V/0 A/0 250 kcmil AG 000 V/255 A/0 250 kcmil AG 000 V/0 A/0 250 kcmil AG Dark beige emid F 6 780850000 25 F 8 780860000 25 F 0 780870000 20 F 2 780880000 20 Partition / version Dark beige emid ) Epoxy resin 2) Dimensions (width/length/ height) Dark beige emid; length: 50 mm (for insul. cable lugs) T F 6 78220000 20 T F 6 2300 78230000 20 2/0.8/58.5 T F 50 78240000 20 T F 8 780900000 20 T F 8 2300 78090000 20 2/09.8/67 T F 50 78240000 20 T F0/2 780890000 20 T F0/2 2300 780920000 20 2/56/76.5 T F 50 78240000 20 T F 0/ 780890000 20 T F 0/2 2300 780920000 20 2/56/76.5 T F 50 78240000 20 Cross-connection 2-pole 3-pole Special 2-pole Special 3-pole QL 2 F 6 780970000 5 QL 3 F 6 780980000 5 QL 2 F 8 780990000 5 QL 3 F 8 78000000 5 QL 2 F 6-8 808980000 5 QL 2 F 0 7800000 5 QL 3 F 0 78020000 5 QL 2 F 6-0 806620000 5 QL 3 F 6-0/2806640000 5 QL 2 F 2 78030000 5 QL 3 F 2 78040000 5 Prof. material for cover 000 mm ADP F 6/F 8 780930000 0 ADP F 6/F 8 780930000 0 ADP F 0/F2 806640000 0 ADP F 0/F 2 780940000 0 Support for Cover Dark beige emid to avoid lateral displacement of cover Standard S 0/5 neutral S 2/5 neutral DEK S S 5/5 neutral S 0/6 neutral DEK 6 HA F 78050000 50 S 0/5 635000000 720 S 2/5 609860000 720 S 5/5 609880000 480 S 0/6 060960000 200 DEK 6 HA F 78050000 50 S 0/5 635000000 720 S 2/5 609860000 720 S 5/5 609880000 480 S 0/6 060960000 200 DEK 6 HA F 78050000 50 S 0/5 635000000 720 S 2/5 609860000 720 S 5/5 609880000 480 S 0/6 060960000 200 DEK 6 HA F 78050000 50 S 0/5 635000000 720 S 2/5 609860000 720 S 5/5 609880000 480 S 0/6 060960000 200 DEK 6 Mounting rails, end brackets, further marking materials ) ith T made from EMID, nominal voltage 000 V 2 ) ith T made from epoxy resin, nominal voltage 2.300 V acc. to pren 5024-4
Stud terminals F 6/2 BZ F 8/2 BZ F 0/2 BZ -series Dimensions idth/length/height with TS 35 x 7 Pitch with partition Stud size mm mm 9.6 / 67 / 56 8 M6 24.6 / 67 / 65 23 M8 35.6 / 67 / 74 34 M0 Rated data ) Rated impulse voltage/pollution severity ) 000 V ) / 25A / 35 mm 2 8 kv / 3 000 V ) / 50A / 50 mm 2 8 kv / 3 000 V ) / 269A / 20 mm 2 8 kv / 3 3... 6 6... 2 0... 20 DIN 46234 / number per side ) DIN 46235 / number per side )...35 / 2...25 / 2...50 / 2...35 / 2... 95 / 2...20 / 2 5 ) under preparation under preparation under preparation under preparation under preparation under preparation Dark beige emid F 6/2 BZ 789770000 25 F 8/2 BZ 789780000 25 F 0/2 BZ 789790000 20 Partition / Dark beige emid ) Epoxy resin 2) T F0/2 780890000 20 T F0/2 780890000 20 T F0/2 780890000 20 Dimensions (width/length/height) Dark beige emid; length: 50 mm (for insul. cable lugs) 2/56/76.5 2/56/76.5 2/56/76.5 Cross-connection Standard 2-pole Standard 3-pole Special 2-pole 3) Special 2-pole 4) QL 2 F 6 780970000 5 QL 3 F 6 780980000 5 QL 2 F 8 780990000 5 QL 3 F 8 78000000 5 QL 2 F 0 7800000 5 QL 3 F 0 78020000 5 QL 2 F 6-0 2BZ 80430000 5 QL 2 F 6-0 2BZ/QV 80440000 5 Prof. material for cover 000 mm ADP F0/F2 780930000 0 ADP F0/F2 780930000 0 ADP F0/F2 780940000 0 Support for cover to avoid lateral displacement of cover Dark beige emid HA F 78050000 50 HA F 78050000 50 HA F 78050000 50 F/FS S 0/5 neutral S 2/5 neutral DEK S S 5/5 neutral S 0/5 635000000 720 S 2/5 609860000 720 S 5/5 609880000 480 S 0/5 635000000 720 S 2/5 609860000 720 S 5/5 609880000 480 S 0/5 635000000 720 S 2/5 609860000 720 S 5/5 609880000 480 Mounting rails, end brackets, further marking materials ) ith T made from EMID, nominal voltage 000 V 2 ) ith T made from epoxy resin, nominal voltage 2.300 V acc. to pren 5024-3 ) Only for cross-connection F0/2BZ with F6/2BZ 4 ) Only for cross-connection F0/2BZ with F6/2BZ, if F0/2BZ or F6/2BZ are already cross-connected 5 ) Only for cable lugs with a width of 3 mm 5
Stud terminals FF 35 FF 70 Max. technical data Dimensions / approvals idth/length/height (mm) without AH idth/length/height (mm) with AH Stud size M VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Cable lug acc. to DIN 46 235 mm 2 Cable lug acc. to DIN 46 234 mm 2 2 x cable lug acc. to DIN 46 235 mm 2 2 x cable lug acc. to DIN 46 234 mm 2 Strips mm Strips mm Strips mm Max. connect. area in mm 2, gauge for flat conn. to EN 50043 Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. 3-pole A Dark beige emid Blue emid Drill template for direct fitting 50 A/50 mm 2 a r i q # LR u 27/07/54 27/36/60 6 000 V/25 A/35 mm 2 3.0 6.0 6 25 2.5 50 6 25 2.5 35 3 x 3 x 0.5 6 x 3 x 0.5 2 x 5.5 x 0.8 2.08 50 C 4 35 35 000 V/5 A/4 2 AG 600 V/30 A/4 2 AG Cat. No. Qty. FF 35 028300000 0 FF 35 028380000 0 Drill template for direct fitting 2 A/95 mm 2 a r i q # LR u //63 /79/7.5 8 000 V/92 A/70 mm 2 6.0 2 6 70 2.5 20 6 70 2.5 70 2 x 5.5 x 0.8 4 x 20 x 4 x 5.5 x 0.8 6 x 5.5 x 0.8 2.08 20 C 6 207 207 000 V/75 A/4 2/0 AG 600 V/70 A/4 2/0 AG Cat. No. Qty. FF 70 028400000 0 FF 70 028480000 0 with covers Partition (thickness 2 mm) Dark beige emid Dark beige emid FF 35 029300000 0 T FF 35 06700000 0 FF 70 029400000 0 T FF 70 067200000 0 Cross-connection QL QL 2/35 064900000 5 QL 3/35 065400000 5 QL 2/70 065000000 5 QL 3/70 065500000 5 Auxiliary/control conductor terminal ZAF 35 (up to 4 mm 2, A) ZAF 35 070500000 0 ZAF 70 066200000 0 Cover Danger sign Beige PA 66 Blue PA 66 Light green PA 66 Yellow, self-adhesive, with lightning flash, can be sticked to AH only AH 35 064460000 20 AH 35 BL 064480000 20 AH 35 HG 064450000 20 AP ) 069700000 20 D 563900000 5 Qty. = 5 cards with 6 labels each AH 70 064560000 20 AH 70 BL 064580000 20 AH 70 HG 064550000 20 AP ) 069800000 20 D 563900000 5 Qty. = 5 cards with 6 labels each Fixing screw/screwdriver Cupal washers For direct fitting Screwdriver For aluminium conductors M 6 x 6 2) 063700000 20 SDI 900840000 CPSB M 6 056200000 50 M 6x6 2) 063700000 20 SDI 900840000 CPSB M 8 056300000 50 DEK Standard S white neutral DEK S S indiv. printed S 2/6.5 609920000 540 S 2/6.5 609930000 08 S 2/6.5 609920000 540 S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials ) The AP can be used only in conjunction with the AH. In the event that no conductor is connected, it guarantees shock protection in the connection. 2) Screw locking e.g. with Loctite 243 for e.g. railway applications acc. to DIN EN 50 55/5.96 Note: If tension rods are used, individual terminals can be combined for protection. (available on request) 6
Stud terminals FF 20 FF 85 / FF 85 M 2 + M 6 FF 300 -series Drill template for direct fitting Drill template for direct fitting Drill template for direct fitting 309 A/50 mm 2 a r i q # LR u 42//72 42/230/8 0 45 A/240 mm 2 a r i q # LR u 55/63/78 55/287/9 2 520 A/300 mm 2 a r i q # LR 55/63/86 55/287/90 6 000 V/269 A/20 mm 2 000 V/353 A/85 mm 2 000 V/520 A/300 mm 2 0 20 4 3 25 60 6 50 6 50 6 20 6 20 2 x 20 x 6 x 20 x 5 x 24 x 5.26 50 C 8 292 292 25 240 0 240 25 85 0 85 2 x 24 x 0 x 24 x 2 x x 6 x x 3 x 35 x 8.37 240 C 382 382 50 300 25 240 50 240 25 240 2 x 40 x 3 x 35 x 6 x 40 x 8 x x 8 x 40 x 3.3 300 520 520 000 V/30 A/0 250 kcmil AG 600 V/30 A/0 250 kcmil AG Cat. No. Qty. FF 20 028500000 5 FF 20 028580000 5 000 V/380 A/8 500 kcmil AG 600 V/360 A/8 500 kcmil AG Cat. No. Qty. FF 85 028600000 4 FF 85 028680000 4 000 V/500 A/6 600 kcmil AG 600 V/50 A/6 600 kcmil AG Cat. No. Qty. FF 300 028700000 4 FF 300 028780000 4 FF 20 029500000 5 T FF 20 067300000 0 FF 85 029600000 4 FF 85 (M2+M6) 028650000 4 T FF 85 067400000 0 FF 300 029700000 4 T FF 300 067400000 0 QL 2/20 06500000 5 QL 3/20 065600000 5 QL 2/85 065200000 5 QL 3/85 065700000 5 QL 2/300 065300000 5 QL 3/300 065800000 5 ZAF 20 066300000 0 ZAF 85 066400000 0 ZAF 300 066500000 0 AH 20 064660000 20 AH 20 BL 064680000 20 AH 20 HG 064650000 20 AP ) 073000000 20 AH 85/300 064760000 0 AH 85/300 BL 064780000 0 AH 85/300 HG 064750000 0 AH 85/300 064760000 0 AH 85/300 BL 064780000 0 AH 85/300 HG 064750000 0 D 563900000 5 Qty. = 5 cards with 6 labels each D 563900000 5 Qty. = 5 cards with 6 labels each D 563900000 5 Qty. = 5 cards with 6 labels each M 6x6 2) 063700000 20 SDI 900840000 M 6x6 2) 063700000 20 SDI 900840000 M 6x6 2) 063700000 20 SDI 900840000 CPSB M 0 056400000 50 CPSB M 2 056500000 20 CPSB M 6 056500000 20 S 2/6.5 609920000 540 S 2/6.5 609930000 08 S 2/6.5 609920000 540 S 2/6.5 609930000 08 S 2/6.5 609920000 540 S 2/6.5 609930000 08 ) The AP can be used only in conjunction with the AH. In the event that no conductor is connected, it guarantees shock protection in the connection. 2) Screw locking e.g. with Loctite 243 for e.g. railway applications acc. to DIN EN 50 55/5.96 Note: If tension rods are used, individual terminals can be combined for protection. (available on request) 7
Feed-through Protective conductor terminals terminals Standard design PE 2.5 PE 4 PE 6 Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data acc. to VDE 06 Part 3/IEC 60 947-7-2 Rated voltage/current for PEN/cross-section Rated voltage/impulse voltage/pollution severity to adjacent terminal Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 AG conductor Nr. Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Support block ) Green/yellow emid DEK Standard S hite neutral DEK S S indiv. printed 5/60/47 0 mm/m 2.5/3.5 x 0.6 V/ A/2.5 mm 2 800 V/ 0.4 0.7 /.5 4 3) 26 2 0.3 4 A 3 PE 2.5 00000000 00 SH 2 0494920000 0 S 2/5 609860000 720 S 2/5 773380000 300 6/60/47 0 mm/m 3/3.5 x 0.6 V/ A/4 mm 2 800 V/ 0.5.0/0.5 0.8 (for centre screw) 2/2 (for centre screw).5 6 26 0 0.3 6 A 4 PE 4 0000000 00 SH 2 0494920000 0 DEK 6 S 8/5 640740000 720 S 8/5 773360000 300 8/60/47 2 mm/m 3.5/4.0 x 0.8 V/ A/6 mm 2 800 V/ 0.8.6/0.5.0 (for centre screw) 3/2 (for centre screw) 0.5 0.5 6 0.5 0 26 8 0.3 0 A 5 PE 6 00200000 50 SH 2 0494920000 0 DEK 8 S 2/6.5 609920000 540 S 2/6.5 609930000 08 Standard design PE 0 PE 6 PE 35 Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data acc. to VDE 06 Part 3/IEC 60 947-7-2 Rated voltage/current for PEN/cross-section Rated voltage/impulse voltage/pollution severity to adjacent terminal Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 AG conductor Nr. Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Support block ) Bridge 2) Green/yellow emid Green/yellow emid DEK Standard 0/60/47 2 mm/m 4/5.5 x.0 V/ A/0 mm 2 800 V/.2 2.4 / 0.5.0 (for centre screw) 3/2 (for centre screw).5 6.5 6 (6 mm with 2.4 ).5 6.5 6.5 6 6 8.3 6 B 6 PE 0 00300000 50 SH 2 0494920000 0 on the external side QB-PEN0 060300000 0 DEK 8 S hite neutral S 2/6.5 609920000 540 DEK S S indiv. printed S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials ) For insul. arrangement of mount. rails in totally insul. installations 2) Insertable bridge in a TN C distribution network between N terminal (DU blue) and PE terminal (PE) 3) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 2/60/63 6 mm/m 5/5.5 x.0 V/ A/6 mm 2 800 V/ 2.0 4.0 /.2 2.4 (for centre screw) /4 (for centre screw).5 6.5 6.5 6.5 6.5 6 4 6.5 25 B 7 PE 6 00400000 50 SH 2 0494920000 0 on the external side QB-PEN6 060200000 0 DEK 8 S 2/6.5 609920000 540 S 2/6.5 609930000 08 6/60/70.5 (with V TS 35 x 5) 8 mm/m 6/6.5 x.2 V/ A/35 mm 2 800 V/ 2.5 5.0 /.2 2.4 (for centre screw) /4 (for centre screw) 2.5 6 2.5 50 (with 4 ) 2.5 50 2.5 50 2.5 50 2 2 2.5 35 B 9 PE 35 00500000 25 for hexagonal socket 02600000 25 SH 2 0494920000 0 on the external side QB-PEN35 06000000 0 DEK 8 S 2/6.5 609920000 540 S 2/6.5 609930000 08 8
Protective conductor terminals Standard design PE.5/ZZ PE 2.5/.5/ZR DK 2.5 PE DK 2.5 DU-PE -series Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data acc. to VDE 06 Part 3/IEC 60 947-7-2 Rated voltage/current for PEN/cross-section Rated voltage/impulse voltage/pollution severity to adjacent terminal Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 AG conductor Nr. Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Support block ) Green/yellow emid DEK Standard S hite neutral DEK S S indiv. printed a r i q # LR u 5/60/47 7 mm/m 2.5/3.5 x 0.6 V/ A/.5 mm 2 690 V/ /.5 2.5 0.5.5 0.5.5 0.5.5 26 4 0.08 2.5 A PE.5 ZZ 06500000 00 SH 2 0494920000 0 S 2/5 609860000 720 S 2/5 773380000 300 a r i q # LR u 5/60/47 0/7 mm/m 2.5/3.5 x 0.6 Twin connection V/ A/2.5 mm 2 V/ A/.5 mm 2 690 V/ /.5 4.5 2.5 0.5.5 0.5.5 3) 0.5.5 26 2 26 4 0.3 4 A3 0.08 2.5 A DK 2.5/.5 ZR 06400000 00 SH 2 0494920000 0 S 2/5 609860000 720 S 2/5 773380000 300 a q # 5/69/63 0 mm/m 2.5/3.5 x 0.6 V/ A/2.5 mm 2 400 V/ /.5 4 3) 22 2 0.3 4 A 3 DK 2.5 PE DK 2.5 DU-PE. Qty. 036300000 036400000 00 SH 2 0494920000 0 S 8/5 640740000 720 S 8/5 773360000 300 Standard design PE 0 ZR PE 70/95 PE 20 Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data acc. to VDE 06 Part 3/IEC 60 947-7-2 Rated voltage/current for PEN/cross-section Rated voltage/impulse voltage/pollution severity to adjacent terminal Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 AG conductor Nr. Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Support block ) Bridge 2) Green/yellow emid DEK Standard 0/70/49.5 Twin connection 2 mm/m 4/5.5 x.0 9 mm/m 5/3.5 x 0.6 V/ A/0 mm 2 V/ A/4 mm 2 800 V/.2 2.4 0.5.0 4 2.5 6.5 6.5 4.5 6.5 6.5 6 4 6 22 2.3 6 0.2 6 Cat. No. Qty. PE 0 ZR 042500000 50 SH 2 0494920000 0 S hite neutral S 2/6.5 609920000 540 DEK S S indiv. printed S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials ) For insul. arrangement of mount. rails in totally insul. installations 2) Insertable bridge in a TN C distribution network between N terminal (DU blue) and PE terminal (PE) 3) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 a r i # 27//5.5 (with V TS 35 x 5) 30 mm/m 8/S 6 DIN 69 V/ A/95 mm 2 000 V/ 6.0 2/3.0 6.0 (for centre screw) 6 6 20 6 95 35 95 Using 95 and 20 mm 2 with 0 tightening torque 35..50 6 2/0 6 20 B 2 only in Cu 4) Cat. No. Qty. PE 70/95 037300000 0 for hexagonal socket SH 2 0494920000 0 Bridge on internal side QV70/95-PEN 072300000 5 S 2/6.5 609920000 540 S 2/6.5 609930000 08 4) V TS 35x5 Cu, Cat. No. 027000000 a r i # //25.5 (with V TS 35 x 5) 35 mm/m 0/S 6 DIN 69 V/ A/20 mm 2 000 V/ 0 20/3.0 6.0 (for centre screw) 35 50 35 50 2 MCM 250 35 50 B 3 only in Cu 4) Cat. No. Qty. PE 20 09700000 0 for hexagonal socket SH 2 0494920000 0 Bridge on internal side QV20-PEN 072400000 5 S 2/6.5 609920000 540 S 2/6.5 609930000 08 9
Protective conductor terminals Compact design N for low type PE 2.5N PE 4N Dimensions / approvals a r i q # LR u idth/length/height (mm) with TS 35 x 7.5 5/54/37.5 6/44/38.5 0 mm/m 2.5/3.5 x 0.6 0 mm/m 3/3.5 x 0.6 Rated data acc. to VDE 06 Part 3/IEC 60 947-7-2 Rated voltage/current for PEN/cross-section V/ A/2.5 mm 2 V/ A/4 mm 2 Rated voltage/impulse voltage/pollution severity to adjacent terminal 500 V/ 0.5.0 / 2.5 4.5 6 Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 5 ) AG conductor Nr. 26 2 Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size 0.3 4 A 3 0.3 6 A 3 Green/yellow emid PE 2.5N 06200000 00 PE 4N 042700000 00 Support block ) SH 2 0494920000 0 SH 2 0494920000 0 DEK Standard DEK 6 S hite neutral S 2/5 609860000 720 S 2/6 609900000 720 DEK S S indiv. printed S 2/5 773380000 300 S 2/6 60990000 30 Compact design N for low type PE 6N PE 35N PE 70N Dimensions / approvals a r i # a r # a r # idth/length/height (mm) with TS 35 x 7.5 2/60/47 2 mm/m 4/5.5 x.0 6/66/5 8 mm/m 6/5.5 x.0 20.5/75/93.5 (with V TS 35 x 5) 3) 22 mm/m 8/S 6 DIN 69 Rated data acc. to VDE 06 Part 3/IEC 60 947-7-2 Rated voltage/current for PEN/cross-section Rated voltage/impulse voltage/pollution severity to adjacent terminal V/ A/6 mm 2 400 V/ V/ A/35 mm 2 400 V/ V/ A/70 mm 2 000 V/.2 2.0/0.5.0 (for centre screw) 2.5 5.0/.2 2.4 (for centre screw) 6.0 0/2.0 4.0 (for centre screw) Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 /2 (for centre screw) 4 6 4 25 (25 mm 2 for 2.2 ) 4 6 4 6 4 6 /4 (for centre screw) 2.5 6 2.5 50 2.5 35 2.5 35 2.5 35 0 6 0 95 0 70 0 70 0 70 AG conductor Nr. 4 6 8 2/0 Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size.5 2 B 7 2.5 50 B 9 0 95 B Green/yellow emid PE 6N 0900000 3) 50 PE 35N 77740000 6) 20 PE 70N 952200000 6) 0 Support block ) SH 2 0494920000 0 SH 2 0494920000 0 SH 2 0494920000 0 Bridge 2 ) Bridge on internal side Bridge on the external side Bridge on internal side QV6N-PEN 07360000 4) 0 QB-PEN35N 079500000 0 QV70N-PEN 9525840000 5 DEK Standard DEK 8 DEK 8 DEK 8 S hite neutral S 2/6.5 609920000 540 S 2/6.5 609920000 540 S 2/6.5 609920000 540 DEK S S indiv. printed S 2/6.5 609930000 08 S 2/6.5 609930000 08 S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials ) For insul. arrangement of mount. rails in totally insul. installations 2) Insertable bridge in a TN C distribution network between N terminal (DU blue) and PE terminal (PE) 3) PE 35 and PE 70N for TS 35 x 5 Cu Cat. No. 027000000 4) For preparing PEN bridges and using QV 6 N, route the N conductorin-feed between PE and phase. 5) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 20
Protective conductor terminals Compact design N for low type DK 2.5N PE DK 2.5N DU-PE -series Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data acc. to VDE 06 Part 3/IEC 60 947-7-2 Rated voltage/current for PEN/cross-section Rated voltage/impulse voltage/pollution severity to adjacent terminal Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 AG conductor Nr. Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Support block ) Green/yellow emid DEK Standard S hite neutral DEK S S indiv. printed Compact design N for low type 5/60/62 8 mm/m 2.5/3.5 x 0.6 V/ A/2.5 mm 2 800 V/.5 4 2) 22 2 0.3 4 A 3 DK 2.5N PE 04620000 00 SH 2 0494920000 0 S 8/5 640740000 720 S 8/5 773360000 300 DK 4N PE 5/60/62 8 mm/m 2.5/3.5 x 0.6 V/ A/2.5 mm 2 800 V/.5 4 2) 22 2 0.3 4 A 3 DK 2.5N DU-PE 04650000 00 SH 2 0494920000 0 S 8/5 640740000 720 S 8/5 773360000 300 DK 4N DU-PE Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data acc. to VDE 06 Part 3/IEC 60 947-7-2 Rated voltage/current for PEN/cross-section Rated voltage/impulse voltage/pollution severity to adjacent terminal Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 AG conductor Nr. Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Support block ) Green/yellow emid 5/60/64 8 mm/m 3/3.5 x 0.6 V/- A/4 mm 2 800 V/ 0.5.0 2.5 6.5 4.5 4 26 0 0.3 6 A3 DK 4N PE 04920000 00 SH 2 0494920000 0 5/60/64 8 mm/m 3/3.5 x 0.6 V/ A/4 mm 2 800 V/ 0.5.0 2.5 6 26 0 0.3 6 A 3 DK 4N DU-PE 04950000 00 SH 2 0494920000 0 DEK S DEK Standard S hite neutral S indiv. printed S 8/5 640740000 720 S 8/5 773360000 300 S 8/5 640740000 720 S 8/5 773360000 300 Mounting rails, end brackets, further marking materials ) For insul. arrangement of mount. rails in totally insul. installations 2) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 2
Neutral disconnect terminals NT 2.5 NT 4 NT 6 NT 0 Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part 5 Rated voltage/impulse voltage/pollution severity clamping screw / N disconnector Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A For busbar 0 x 3 For busbar 0 x 3 as PA disconnector (VDE 007) Blue emid Dark beige emid A/4 mm 2 5/60/47 0 mm/m 2.5/3.5 x 0.6 400 V/24 A/2.5 mm 2 400 V/ /.5 4 ) 0.3 4 A 3 600 V/25 A/22 2 AG 600 V/20 A/26 2 AG NT 2.5 0068000000 NT 2.5 0060000000 4 A/6 mm 2 6/60/47 0 mm/m 3/3.5 x 0.6 400 V/ A/4 mm 2 400 V/ 0.5.0 / 0.4 0.8 2.5 6 0.3 6 A 4 600 V/35 A/22 0 AG 600 V/35 A/26 0 AG NT 4 0078000000 NT 4 0070000000 57 A/0 mm 2 8/60/47 2 mm/m 3.5/4.0 x 0.8 400 V/4 A/6 mm 2 400 V/ 0.8.2 / 0.8.6 3 0.5 0.5 0 0.5 0 0.5 0 A 5 600 V/45 A/20 8 AG 600 V/45 A/20 8 AG NT 6 00880000 50 NT 6 00800000 50 76A/6 mm 2 0/60/47 2 mm/m 4/5.5 x.0 400 V/57 A/0 mm 2 400 V/.2 2.0 / 0.8.6 4.5 6.5 6 (6 mm 2 w. 2.4 ).5 6.5 6.5 6.3 6 B 6 600 V/60 A/6 8 AG 600 V/65 A/6 6 AG NT 0 00980000 50 NT 0 00900000 50 End plate Thickness.5 mmblue emid Dark beige emid AP 2.5-0 050080000 50 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 AP 2.5-0 050000000 50 Support plate for SSch 0 x 3 Blue emid Dark beige emid HP 2.5-0 050280000 20 HP 2.5-0 050200000 20 HP 2.5-0 050280000 20 HP 2.5-0 050200000 20 HP 2.5-0 050280000 20 HP 2.5-0 050200000 20 HP 2.5-0 050280000 20 HP 2.5-0 050200000 20 Thickness.5 mm Distance HP-HP max. 200mm Busbar 0 x 3 Distance f. upper edge busbar to upper edge of TS 35 = 25.5 mm Cu 40 A SSch 0 x 3 Cu 0348900000 m SSch 0 x 3 Cu 0348900000 m SSch 0 x 3 Cu 0348900000 m SSch 0 x 3 Cu 0348900000 m Clamping yoke Supply for SSch 0 x 6 50 mm 2 stranded 6 35 mm 2 flexible Gauge pin B9 ZB 35 K 0502680000 20 ZB 35 0266500000 20 ZB 35 K 0502680000 20 ZB 35 0266500000 20 ZB 35 K 0502680000 20 ZB 35 0266500000 20 ZB 35 K 0502680000 20 ZB 35 0266500000 20 ZB 35 K ZB 35 Test plug PS 2.3 080400000 20 PS 2.3 080400000 20 PS 2.3 080400000 20 PS 2.3 080400000 20 End bracket Bridge on the external side Cross-section of connection is reduced by one level DEK Standard S hite neutral DEK S S indiv. printed E 35 / 2 06200000 50 S 2/5 609860000720 S 2/5 773380000300 E 35 / 2 06200000 50 DEK 6 S 2/6 609900000600 S 2/6 6099000020 E 35 / 2 06200000 50 DEK 8 S 2/6.5 609920000540 S 2/6.5 60993000008 E 35 / 2 06200000 50 DEK 8 S 2/6.5 609920000540 S 2/6.5 60993000008 Mounting rails, end brackets, further marking materials ) Ferrules with opt. diameter for terminals with pitch of 5mm: Cat. No. 33300000 22
Neutral disconnect terminals NT 6N NT 35N NT 70N -series Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part 5 Rated voltage/impulse voltage/pollution severity clamping screw / N disconnector Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size - / - 2/60/47 2 mm/m 4/5.5 x.0 400 V/76 A/6 mm 2 400 V/.2 2.2 / 0.8.6 4.5 6.5 25 (25 mm 2 with 2.4 ).5 6.5 6.5 6.5 25 B 7 - / - 6/66/5 8mm/M 6/5.5 x.0 400 V/25 A/35 mm 2 400 V/ 2.5 5 /.2 2.4-2.5 6 2.5 50 2.5 35 2.5 35 2.5 35 2.5 35 B 9 207 A/95 mm 2 a 20.5/75/86 22 mm/m 8/S 6 DIN 69 400 V/92 A/70 mm 2 400 V/ 6.0 0 / 2.5 5-0 6 0 95 0 70 0 70 0 70 0 95 B For busbar 0 x 3 Blue emid NT 6N 09000000 50 NT 35N 78550000 20 600 V/75 A/6 2/0 AG NT 70N 95220000 0 Support plate for SSch 0 x 3 Blue emid Dark beige emid HP 2.5-0 050280000 20 HP 2.5-0 050200000 20 HP 2.5-0 050280000 20 HP 2.5-0 050200000 20 HP 2.5-0 050280000 20 HP 2.5-0 050200000 20 Thickness.5 mm Distance HP-HP max. 200mm Busbar 0 x 3 Cu 40 A SSch 0 x 3 Cu 0348900000 m SSch 0 x 3 Cu 0348900000 m SSch 0 x 3 Cu 0348900000 m Distance f. upper edge busbar to upper edge of TS 35 = 25.5 mm Clamping yoke Supply for SSch 0 x 6 50 mm 2 stranded ZB 35 K 0502680000 20 ZB 35 0266500000 20 ZB 35 K 0502680000 20 ZB 35 0266500000 20 ZB 35 K 0502680000 20 ZB 35 0266500000 20 ZB 35 K ZB 35 Test plug PS 2.3 080400000 20 PS 2.3 080400000 20 PS 4 0299600000 20 End bracket Bridge on the external side Cross-section of connection is reduced by one level DEK Standard S hite neutral DEK S S indiv. printed E 35 / 2 06200000 50 QB-PEN6N 079600000 0 S 2/6.5 609920000 540 S 2/6.5 609930000 08 E 35 / 2 06200000 50 QB-PEN35N 079500000 0 S 2/6.5 609920000 540 S 2/6.5 609930000 08 E 35 / 2 06200000 50 QB-PEN70N 079700000 0 S 2/6.5 609920000 540 S 2/6.5 609930000 08 TN-S-Circuit Mounting rails, end brackets, further marking materials 23
Disconnect test terminals TR 2.5 TR 2.5 without disconnector TR 2.5/ZZ ZQV Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated impulse voltage acc. to VDE 00/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A End plate/partition AP Cross-connection / test plug QL 2 0 PS Dark beige emid Dark beige emid Blue emid Blue emid Dark beige emid Orange PA AP (thickness.5 mm) Dark beige emid Blue emid T Dark beige emid Cross-connection plug (2-pole, ø 2.3) VQB Screening bar LS 2.8 Notching tool for cross-connections To notch the punch-out in the terminal support Screwdriver SDIZ 4 A / 2.5 mm 2 5/60/49 0 mm/m 2.5/3 8) /3.5 x 0.6 800 V 2) /4 A 5 ) /2.5 mm 2 / 0.5 0.6 (for test socket) /2 (for test socket).5 4 ) 0.3 4 A 3 26 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. without StB 000000 00 2 StB 2.3 0200000 00 without StB 080000 00 2 StB 2.3 0280000 00 2 StB 2.0 03000000 00 060000 00 AP 2.5 0 050000000 50 AP 2.5 0BL 050080000 50 T 2.5 0 05000000 20 QL 2 025800000 00 QL 3 025900000 00 QL 4 026000000 50 QL 0 0338000000 20 BS-M 2.5x4.5 062700000 00 PS2.3(ø 2.3) 080400000 20 PS2.0 (ø 2.0) 0293800000 20 DS 2 069900000 20 LS 2.8 4) 056400000 50 QB B/24 579060000 20 A 2 900450000 SDIZ 9008450000 4 A / 2.5 mm 2 5/60/49 0 mm/m 2.5/3 8) /3.5 x 0.6 800 V 2) /4 A 5) /2.5 mm 2 / 0.5 0.6 (for test socket) /2 (for test socket).5 4 ) 0.3 4 A 3 26 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 02900000 00 with StB 2.3 02800000 00 with StB 2.0 0300000 00 AP 2.5 0 050000000 50 AP 2.5 0 BL 050080000 50 T 2.5 0 05000000 20 QL 2 025800000 00 QL 3 025900000 00 QL 4 026000000 50 QL 0 0338000000 20 BS-M 2.5x4.5 062700000 00 PS2.3(ø 2.3) 080400000 20 PS2.0 (ø 2.0) 0293800000 20 LS 2.8 4) 056400000 50 QB B/24 579060000 20 A 2 900450000 SDIZ 9008450000 4 A/.5 mm 2 5/60/49 7 mm/m 3/3.5 x 0.6 400 V/4 A 5) /2.5 mm 2 0.5 0.6 2.5 4 ) 0.3 4 A 3 24 Cat. No. Qty. 2 StB 2.3 8) 039900000 00 2 StB 2.3 8) 039980000 00 AP TR 2.5/ZZ 074600000 20 AP TR2.5/ZZ 074680000 20 ZQV 2.5/2 608860000 60 ZQV 2.5/3 608870000 60 ZQV 2.5/4 608880000 60 ZQV 2.5/5 608890000 20 ZQV 2.5/6 608900000 20 ZQV 2.5/7 60890000 20 ZQV 2.5/8 608920000 20 ZQV 2.5/9 608930000 20 ZQV 2.5/0 608940000 20 PS 2.3(ø 2.3) 080400000 20 SDIZ 9008450000 Fuse holder for 5x20 SIHA SIHA /G 20 400 V SIHA /G 20 0-36 V SIHA /G 20 35-70 V SIHA /G 20 60-50 V SIHA /G 20 40-250 V Diode plug 3) (up to 250 V) ) ( ith wire link ithout special components DEK Standard S hite neutral DEK S S indiv. printed without LED with LED Qty. 9537550000 25 9537560000 25 9537570000 25 9537580000 25 9537590000 25 SD 2.5 058460000 25 SD 2.5 058560000 25 SD 2.5 058660000 25 SD 2.5 058760000 25 S 2/5 609860000 720 S 2/5 773380000 300 without LED with LED Qty. 9537550000 25 9537560000 25 9537570000 25 9537580000 25 9537590000 25 SD 2.5 058460000 25 SD 2.5 058560000 25 SD 2.5 058660000 25 SD 2.5 058760000 25 S 2/5 609860000 720 S 2/5 773380000 300 without LED with LED Qty. 9537550000 25 9537560000 25 9537570000 25 9537580000 25 9537590000 25 SD 2.5 058460000 25 SD 2.5 058560000 25 SD 2.5 058660000 25 SD 2.5 058760000 25 S 8/5 640740000 720 S 8/5 773360000 300 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 2 ) As disconnect test terminal 500 V 3 ) Apply only 250 V to the diode 4 ) hen using the screening bar, rated voltage is reduced to 250 V 5 ) Rated current is limited to A, if a diode plug with soldered diode is used 24
Disconnect test terminals TR 2.5 D with diode plug TR 2.5 D with StB with diode plug and test socket screw 2.3 TR 4 ZQV -series Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated impulse voltage acc. to VDE 00/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Cont. current of cross-connect. multi-pole A End plate/partition AP Cross-connection / test plug QL 2 0 PS Dark beige emid Dark beige emid Blue emid Blue emid Dark beige emid Orange PA AP (thickness.5 mm) Dark beige emid Blue emid T Dark beige emid Cross-connection plug (2-pole, ø 2.3) VQB Screening bar LS 2.8 Notching tool for cross-connections To notch the punch-out in the terminal support Screwdriver SDIZ 4 A / 2.5 mm 2 4 A / 2.5 mm 2 a r q # a r q # 5/60/49 + 8 for SD 0 mm/m 2.5/3.5 x 0.6 500 V 3) /4 A 4) /2.5 mm 2.5 4 ) 0.3 4 A 3 26 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. ( 03500000 25 ) 03600000 25 ith wire link 03700000 25 AP 2.5 0 050000000 50 AP 2.5 0 BL 050080000 50 T 2.5 0 05000000 20 QL 2 025800000 00 QL 3 025900000 00 QL 4 026000000 50 QL 0 0338000000 20 BS-M 2.5x4.5 062700000 00 PS2.3(ø 2.3) 080400000 20 PS2.0 (ø 2.0) 0293800000 20 LS 2.8 056400000 50 QB B/24 579060000 20 A 2 900450000 SDIZ 9008450000 5/60/49 + 8 for SD 0 mm/m 3/3.5 x 0.6 800 V 3) /4 A 4) /2.5 mm 2 / 0.5 0.6 (for test socket) 2.5 4 ) 0.3 4 A 3 26 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. ( 000000 25 ) 03300000 25 ith wire link 03400000 25 AP 2.5 0 050000000 50 AP 2.5 0 BL 050080000 50 T 2.5 0 05000000 20 QL 2 025800000 00 QL 3 025900000 00 QL 4 026000000 50 QL 0 0338000000 20 BS-M 2.5x4.5 062700000 00 PS2.3(ø 2.3) 080400000 20 PS2.0 (ø 2.0) 0293800000 20 LS 2.8 056400000 50 QB B/24 579060000 20 A 2 900450000 SDIZ 9008450000 A / 4 mm 2 6/60/47 3 mm/m 3/3.5 x 0.6 400 V/ A 4) /4 mm 2 0.5.0 / 0.5 0.6 (for test socket) 2.5 6 6 A 4 300 V ) /0 A ) /22 2 AG 300 V ) /0 A ) /22 0 AG Cat. No. Qty. with StB 79020000 50 without StB 79080000 50 with StB 790220000 50 without StB 79090000 50 AP 2.5 0 050000000 50 AP 2.5 0 BL 050080000 50 T 2.5 0 05000000 20 ZQV 4N/2 758250000 60 ZQV 4N/3 762630000 60 ZQV 4N/4 762620000 60 ZQV 4N/0 758260000 20 ZQV 4N/4 758270000 0 QB75/6.2/5 0535200000 0 ISPFQB75S 0526700000 0 ISPF QB75 BL 0526780000 0 ISPF QB75 RT 0526760000 0 PS 2.3 (ø 2.3) 080400000 20 SDIZ 9008450000 Fuse holder for 5x20 SIHA SIHA /G 20 400 V AD/DC TR 2.5 D 0 36 V AD/DC 35 70 V AD/DC SIHA 2/G 20 60 50 V AD/DC TR 4 40 250 V AD/DC Diode plug 3) (up to 250 V) ) ( ith wire link ithout special components DEK Standard S hite neutral DEK S S indiv. printed without LED with LED Qty. 9537550000 25 9537560000 25 9537570000 25 9537580000 25 9537590000 25 SD 2.5 058460000 25 SD 2.5 058560000 25 SD 2.5 058660000 25 SD 2.5 058760000 25 S 2/5 609860000 720 S 2/5 773380000 300 without LED with LED Qty. 9537550000 25 9537560000 25 9537570000 25 9537580000 25 9537590000 25 SD 2.5 058460000 25 SD 2.5 058560000 25 SD 2.5 058660000 25 SD 2.5 058760000 25 S 2/5 609860000 720 S 2/5 773380000 300 without LED with LED Qty. 9537600000 25 953760000 25 9537620000 25 9537630000 25 9537640000 25 DEK 6 S 2/6 609900000 600 S 2/6 60990000 20 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 2 ) As disconnect test terminal 500 V 3 ) Apply only 250 V to the diode 4 ) Rated current is limited to A, if a diode plug with soldered diode is used 25
Disconnect test terminals SAKC 4/35 DTR 2.5 DTR 2.5/E 0 A/.5 mm 2 0 A/.5 mm 2 Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 6.5/49.5/42.5/59.5 6.2/94/69 6.2/8/69 2 mm/m 3/3.5 x 0.6 8 mm/m 3/3.5 x 0.6 8 mm/m 3/3.5 x 0.6 Rated data Rated impulse voltage acc. to VDE 00/pollution severity 400 V/25 A/4 mm 2 400 V/3 A ) /2.5 mm 2 4 kv/3 400 V/0 A ) /2.5 mm 2 4 kv/3 0.5.0 0.5 0.6 0.5 0.6 Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 2.5 4 2.5 4 2.5 4 Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size A 4 0.3 4 A 3 0.3 4 A 3 Cont. current of cross-connect. 2-pole A 0 Cont. current of cross-connect. multi-pole A 0 24 24 Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Material KrG, colour: dark beige emid SAKC 4/35 0357560000 50 Material KrG, colour: dark beige emid SAKC 4/35 2StB2.3 0357660000 50 dark beige emid SAKC 4/35 BL 9528070000 25 9528090000 25 Blue emid SAKC 4/35 BL 9528080000 25 952800000 25 End plate/partition Dark beige emid AP 077600000 20 Blue emid T(.5) 03060000 20 Dark beige emid T(.0) 029700000 20 (Thickness.5 mm) Cross-connection QL 2 0 QB 2 0482700000 00 VQB.5/50BL 6380000 5 VQB.5/50BL 6380000 5 QB 3 0482800000 50 VQB.5/50RT 6390000 5 VQB.5/50RT 6390000 5 QB 4 0482900000 50 VQB.5/50S 63520000 5 VQB.5/50S 63520000 5 Q 25 blank 034000000 20 PS Cross-connection plug (2-pole, ø 2.3) VQB PS 2.3 (ø 2.3) 080400000 20 PS2.3(ø2.3) 080400000 20 PS 2.3 (ø2.3) 080400000 20 Notching tool for cross-connections To notch the punch-out in the terminal support Screwdriver SDIZ SDIZ 9008450000 SDIZ 9008450000 Diode plug (spare) ( SD 2.5 058460000 25 SD 2.5 058460000 25 ) SD 2.5 058560000 25 SD 2.5 058560000 25 ith wire link SD 2.5 058660000 25 SD 2.5 058660000 25 ithout special components SD 2.5 058760000 25 SD 2.5 058760000 25 DEK Standard DEK 6.5 DEK 6.5 DEK 6.5 S hite neutral DEK S S indiv. printed S 2/6 609900000 600 S 2/6 60990000 20 S 2/6 609900000 600 S 2/6 60990000 20 Mounting rails, end brackets, further marking materials ) Rated current is limited to A, if a diode plug with soldered diode is used. 26
Disconnect test terminals DT.5/ with space-saving TOP connection DT.5/2 with space-saving TOP connection DT.5/3 with space-saving TOP connection -series Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated impulse voltage acc. to VDE 00/.89 /pollution severity a r q # a r q # 6.5/2/67 6.5/2/67 0 mm/m 2.5/3.5 x 0.6 0 mm/m 2.5/3.5 x 0.6 250 V/0 A/.5 mm 2 250 V/0 A/.5 mm 2 4 kv/3 4 kv/3 a r q # 6.5/2/67 0 mm/m 2.5/3.5 x 0.6 250 V/0 A/.5 mm 2 4 kv/3 Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 60 947- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A Test plug PS Dark beige/yellow emid Beige/yellow PA Blue/light bluepa.5 2.5 0.5.5 0.5.5 0.5.5 0.3 2.5 A 2 50 V/0 A/26 4 AG 50 V/0 A/26 4 AG Cat. No. Qty. 05800000 25 05860000 25 PS 2.3 080400000 20.5 2.5 0.5.5 0.5.5 0.5.5 0.3 2.5 A 2 50 V/0 A/26 4 AG 50 V/0 A/26 4 AG Cat. No. Qty. 05900000 25 05560000 25 PS 2.3 080400000 20.5 2.5 0.5.5 0.5.5 0.5.5 0.3 2.5 A 2 50 V/0 A/26 4 AG 50 V/0 A/26 4 AG Cat. No. Qty. 06000000 25 05760000 25 0660000 25 PS 2.3 080400000 20 Switching examples DT.5/ Disconnect test terminals -series DT.5/ with space-saving TOP connection 0 DT.5/2 with space-saving TOP connection 0 DT.5/3 with space-saving TOP connection 0 The DT.5 enables the disconnection of one- and two-pole signal lines. By simply operating the selection switch, insulation and current measurements can be performed. Quick and reliable conductor connection thanks to TOP connection with open clamping unit Test point via test socket screw Clear colour coding of conductor connection, test point and switch position Non-symmetrical shape enhances mounting rail orientation High distortion stiffness thanks to dualshell enclosed terminal carrier A M Ω 2 M Ω M Ω A 2 M Ω DEK Standard DEK 6.5 see S hite neutral Accessories DEK S S indiv. printed S 8/5 640740000720 S 8/5 773360000300 Mounting rails, end brackets, further marking materials DEK 6.5 see Accessories S 8/5 640740000720 S 8/5 773360000300 DEK 6.5 see Accessories S 8/5 640740000720 S 8/5 773360000300 27
Fuse terminals TR 2.5/SI with fuse holder for G fuse inserts 5x20 TR 4/SI ZQV Note: ith blown fuse the follow-on circuit is still under current. Disconnect lever to open circuit. Max. technical data Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 Rated data of terminal base Rated impulse voltage acc. to VDE 00/.89 /pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 947- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A Partition/End plate AP Thickness.5 mm Cross-connection Dark beige emid Dark beige emid/led Dark beige emid/led Dark beige emid/led Dark beige emid/led T Thickness.5 mm Notching tool for QL A 2 6.3 A )/- 5/60/83 0 mm/m 2.5/3.5 x 0.6 400 V/6.3 A 2 )/2.5 mm 2 0.4 0.8 /2.5 4 3 ) 0.3 4 A 3 26 400 V/0 A/22 0 AG 5) Cat. No. Qty. 400 V 763940000 25 0-36 V : 36 V/0 A/22 0 AG 763950000 25 35-70 V : 70 V/0 A/22 0 AG 763960000 25 60-50 V : 50 V/0 A/22 0 AG 763970000 25 40-250 V : 250 V/0 A/22 0 AG 763980000 25 AP 2.5-0 050000000 50 AP2.5-0 BL 050080000 50 T 2.5-0 05000000 20 QL 2 025800000 00 QL 3 025900000 00 QL 4 026000000 50 QL 0 0338000000 20 BS-M 2.5x4.5 05200000 00 QB B24 579060000 20 A 2 900450000 6.3 A ) /- a r 6/60/82 3 mm/m 3/3.5 x 0.6 400 V/6.3 A 2 )/4 mm 2 0.5.0 2.5 6 0.3 6 A 4 300 V/6.3 A/22 0 AG 4 ) 300 V/6.3 A/22 0 AG 4 ) Cat. No. Qty. TR 4 SI 790240000 25 0-36 V : 36 V/6.3 A/22 0 AG 794370000 25 35-70 V : 70 V/6.3 A/22 0 AG 794380000 25 60-50 V : 50 V/6.3 A/22 0 AG 794390000 25 40-250 V : 250 V/6.3 A/22 0 AG 794400000 25 AP 2.5-0 050000000 50 AP2.5-0 BL 050080000 50 T 2.5-0 05000000 20 ZQV 4N/2 758250000 60 ZQV 4N/3 762630000 60 ZQV 4N/4 762620000 60 ZQV 4N/0 758260000 60 ZQV 4N/4 758270000 60 QB75/6.2/5 0535200000 20 ISPF QB75 S 0526700000 20 ISPF QB75 BL 0526780000 20 ISPF QB75 RT 0526760000 20 G fuse inserts 5 x 20 mm Acc. to IEC 6027-2 (VDE 0820 T.2 Bl 2 ) Rat. current (A):0.0 fast Rated voltage 250 V 0.20 fast Rated switch-off capacity 500 A 0.25 fast (at 250 V, 50 Hz, cos ϕ = 0.7) 0.50 fast.0 fast.6 fast 2.0 fast 2.5 fast 3.5 fast 4.0 fast 5.0 fast 6.3 fast DEK Standard S hite neutral DEK S S indiv. printed 0430300000 0 0430400000 0 0430500000 0 0430600000 0 0430700000 0 0430800000 0 0430900000 0 043000000 0 04300000 0 0400000 0 043300000 0 043400000 0 S 2/6.5 609920000 540 S 2/6.5 609930000 08 0430300000 0 0430400000 0 0430500000 0 0430600000 0 0430700000 0 0430800000 0 0430900000 0 043000000 0 04300000 0 0400000 0 043300000 0 043400000 0 DEK 6 S 2/6 609900000 600 S 2/6 60990000 20 Mounting rails, end brackets, further marking materials ) Pay attention to the power loss of the fuse insert up to.6 2 ) Maximum power loss.6 3 ) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 4 ) TR 4 SI 5 ) TR 2.5 SI 28
Fuse terminals SAKS 2/35 for D fuses E 6 SAKS 4/35 for D 0 fuses E 4 SAKS 5/35 for D 02 fuses E 8 -series Note: ith blown fuse the follow-on circuit is still under current. Disconnect lever to open circuit.. Max. technical data Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 28/80/75 24/75/66 28/80/66 2 mm/m 4/5.5 x 4 mm/m 4/5.5 x 3 mm/m 4/5.5 x Rated data of terminal base 500 V/0 (25) A 5 ) /0 mm 2 400 V 4 ) /6 A/0 mm 2 400 V 4 ) /63 A/6 mm 2 Rated impulse voltage acc. to VDE 00/.89 /pollution severity.2 2.4.2 2.4.2 2.4 4 4 4.5 6 0.5 0.5 0.5 6 0.5 0 0.5 0.5 6 Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 0.5 0 0.5 0.5 6 Max. clamping range in mm 2 /Gauge pin acc. to 947- Size 0.33 6 B 6 0.33 6 B 6.5 6 B 7 Cont. current of cross-connect. 2-pole A (QL 2 5) 47 (QL 2 5) 47 (QL 2 5) 47 Cont. current of cross-connect. multi-pole A (QL 6 0) 36 (QL 6 0) 36 (QL 6 0) 36 600 V/25 A/22 8 AG 600 V/30 A/22 8 AG 600 V/63 A/4 6 AG Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Dark beige emid Dark beige emid KrG Dark beige emid KrG Dark beige emid KrG 368700000 20 050800000 20 050200000 20 Dark beige emid/led Diazed E 6 Neozed D 0 Neozed D 02 Dark beige emid/led Dark beige emid/led Partition/End plate T T 058800000 20 T 058800000 20 T 058800000 20 Thickness.5 mm Cross-connection QL 2 0 QL 2 0207800000 20 QL 2 08000000 20 QL 2 0207800000 20 QL 3 0207900000 20 QL 3 0800000 20 QL 3 0207900000 20 QL 4 0208000000 20 QL 4 08200000 20 QL 4 0208000000 20 QL 0 0338900000 20 QL 0 0339000000 20 QL 0 0338900000 20 BS M 4x9 003300000 00 BS M 4x9 003300000 00 BS M 4x9 003300000 00 SS M 4 036400000 00 SS M 4 036400000 00 SS M 4 036400000 00 D fuse inserts D 0 fuse inserts D 02 fuse inserts Rated voltage 500 V Rated voltage 400 V Rated voltage 400 V E 0 A 0208500000 25 E 4/2 037400000 0 E 8/20 036300000 0 E 6 A 0208600000 25 E 4/4 037500000 0 E 8/25 036400000 0 E 20 A 0208700000 25 E 4/6 08300000 0 E 8/35 036500000 0 E 25 A 0208800000 25 E 4/0 08400000 0 E 8/50 036600000 0 E 4/6 08500000 0 E 8/63 036700000 0 Gauge rings Gauge rings Gauge rings P 4/2 038000000 50 P 4/4 03800000 50 P 4/6 08600000 50 P 6/0 0208900000 00 P 4/0 08700000 50 P 6/6 0209000000 00 P 6/20 020900000 00 P 8/20 036800000 50 P 8/25 036900000 50 P 8/35 0362000000 50 P 8/50 036200000 50 Screw cap (spare) Screw cap (spare) Screw cap (spare) SK 02840000 20 SK 033940000 20 SK 035930000 20 DEK Standard S hite neutral S 2/6.5 609920000 540 S 2/6.5 609920000 540 S 2/6.5 609920000 540 DEK S S indiv. printed S 2/6.5 609930000 08 S 2/6.5 609930000 08 S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials 4 ) Also for 400 V - with Neozed marine fuse 5 ) Current for overload up to 0 A, for short-circuits up to 25 A 29
Fuse terminals SI 6 for metric fuses SI 6 LD with LED indicator for DC or AC voltage SI 6 2 LD with 2 LEDs for metric fuses, for DC voltage Note: Voltage is disconnected by opening the disconnect lever If the fuse of the LED variants is defective, the follow-on circuit is still under current, since low-level current is still flowing via the LED (for own consumption). Max. technical data Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 Rated data of terminal base Rated impulse voltage acc. to VDE 00/.89 /pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 947- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A Dark beige emid Dark beige emid/led Dark beige emid/led Dark beige emid/led Dark beige emid/led Replacement disconnect lever, dark beige emid/led Replacement disconnect lever, dark beige emid/led Replacement disconnect lever, dark beige emid/led 6.3 A/- 8/60/60 2 mm/m 3.5/4.0 x 0.8 500 V 2) /6.3 A ) /6 mm 2 0.8.6 3 0.5 0.5 0 0.5 0 0.5 0 A 5 26 300 V/0 A/20 8 AG 300 V/0 A/20 8 AG Cat. No. Qty. 0000000 50 Disconnect terminal 028200000 50 with contact sleeve 6.3 A/- a r q # LR u 8/60/70 2 mm/m 3.5/4.0 x 0.8 500 V 2) /6.3 A ) /6 mm 2 0.8.6 3 0.5 0.5 0 0.5 0 0.5 0 A 5 26 300 V/0 A/20 8 AG 300 V/0 A/20 8 AG Cat. No. Qty. 0 36 V dc/ac 0300000 50 30 70 V dc/ac 02200000 50 60 50 V dc/ac 02300000 50 60 50 Vdc 02400000 50 40 250 Vac 0 36 V dc/ac 02230000 50 30 70 V dc/ac 0220000 50 60 50 V dc/ac 035500000 50 2-pole connection of LED This item has been replaced by SI 6 LD with the same functionality (see left side). Pay attention to the voltage ranges! Partition/End plate AP T Type AP Cat. No. 050000000 Qty. 50 T 2.5-0 05000000 20 Thickness.5 mm Thickness.5 mm Provide partition behind the last SI 6 Cross-connection/Test plug/notching tool QL 2 0 QL 2 QL 3 094300000 094400000 50 50 QL 4 094500000 50 QL 0 0338300000 20 BS-M 3x5 05200000 00 PS 2.3 080400000 20 Notching tool for QL A 2 G fuse inserts 5 x 25 mm with indicator A 2 900450000 Acc. to DIN 4 576 Rated current (A):0.2 med. blow 0546900000 0 Rated voltage 250 V 0.5 med. blow 050300000 0 0.8 med. blow 0646400000 0 med. blow 0265800000 0 0 med. blow 09300000 0 2 fast 092700000 0 4 fast 092800000 0 6.3 fast 092900000 0 G fuse inserts 5 x 20 mm Acc. to IEC 6027-2 (VDE0820T.2 Bl ) rated current (A):0.0 fast 0430300000 0 Rated voltage 250 V 0.20 fast 0430400000 0 Rated switch-off capacity 500 A 0.25 fast 0430500000 0 (at 250 V, 50 Hz, cos ϕ = 0.7) 0.50 fast.0 fast.6 fast 2.0 fast 2.5 fast 3.5 fast 4.0 fast 5.0 fast 6.3 fast 0430600000 0430700000 0430800000 0430900000 043000000 04300000 0400000 043300000 043400000 0 0 0 0 0 0 0 0 0 Mounting rails, end bracket, marking material ) Maximum power loss.6 AP 050000000 50 T 2.5-0 05000000 20 QL 2 094300000 50 QL 3 094400000 50 QL 4 094500000 50 QL 0 0338300000 20 BS-M 3x5 05200000 00 PS 2.3 080400000 20 A 2 900450000 0546900000 0 050300000 0 0646400000 0 0265800000 0 09300000 0 092700000 0 092800000 0 092900000 0 0430300000 0 0430400000 0 0430500000 0 0430600000 0 0430700000 0 0430800000 0 0430900000 0 043000000 0 04300000 0 0400000 0 043300000 0 043400000 0 2) Rated voltage 500 V for centrically arranged fuse inserts or contact sleeves 30
Fuse terminals SI 6/2 ) for inch fuses SI 6/2 ) with LED for inch fuses VAC/VDC SI 6/2 ) with 2 LEDs for inch fuses only VDC -series Note: Voltage is disconnected by opening the disconnect lever If the fuse of the LED variants is defective, the follow-on circuit is still under current, since low-level current is still flowing via the LED (for own consumption). Max. technical data Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 Rated data of terminal base Rated impulse voltage acc. to VDE 00/.89 /pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 947- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A Partition/End plate AP Thickness.5 mm Cross-connection Dark beige emid Dark beige emid/led Dark beige emid/led Dark beige emid/led Dark beige emid/led T Thickness.5 mm QL 2 0 Notching tool for QL A 2 G fuse inserts 5 x 25 mm with indicator Acc. to DIN 4 576 Rated current (A): 0.2 med. blow Rated voltage 250 V 0.5 med. blow 0.8 med. blow med. blow 0 med. blow 2 fast 4 fast 6.3 fast G fuse inserts 5 x 20 mm Rated current (A): 0.0 fast Acc. to IEC 6027-2 (VDE0820T.2 Bl ) Rated voltage 250 V Rated switch-off capacity 500 A (at 250 V, 50 Hz, cos ϕ = 0.7) 0 A/- 2/60/67 2 mm/m 3.5/4.0 x 0.8 500 V 3) /6.3 A 2) /6 mm 2 0.8.6 3 0.5 0.5 0 0.5 0 0.5 0 A 5 26 600 V/6 A/20 8 AG 600 V/6 A/20 8 AG Cat. No. Qty. 04000000 25 AP 050000000 50 T 2.5-0 05000000 20 Provide partition behind the last SI 6 QL 2 0470700000 50 QL 3 0470800000 50 QL 4 0470900000 50 QL 0 047000000 20 BS-M 3x5 05200000 00 PS 2.3 080400000 20 A 2 900450000 Fuse inserts /4" x /4" (6.3 x ) rated voltage 440 V E 2 A 0294500000 0 E 3 A 0295700000 0 E 5 A 0294600000 0 E 7 A 0295800000 0 E 0 A 0293900000 0 0430300000 0 G fuses /4" x /4" (6.3 x ) (250 V 0.05 6.3 A) can be obtained from co. ELU Inselstraße 8 4443 Dortmund, Germany +49 (0) 23 557030-0. 0 A/- a r # LR u DN 2/60/79 2 mm/m 3.5/4.0 x 0.8 500 V 3) /6.3 A 2) /6 mm 2 0.8.6 3 0.5 0.5 0 0.5 0 0.5 0 A 5 26 600 V/6 A/20 8 AG 0 220 V/6 A/20 8 AG Cat. No. Qty. 0 36 V dc/ac 0400000 25 30 70 V dc/ac 04200000 25 60 50 V dc/ac 04300000 25 60 50 Vdc 04400000 25 40 250 Vac AP 050000000 50 T 2.5-0 05000000 20 QL 2 0470700000 50 QL 3 0470800000 50 QL 4 0470900000 50 QL 0 047000000 20 BS-M 3x5 05200000 00 PS 2.3 080400000 20 A 2 900450000 Fuse inserts /4" x /4" (6.3 x ) rated voltage 440 V E 2 A 0294500000 0 E 3 A 0295700000 0 E 5 A 0294600000 0 E 7 A 0295800000 0 E 0 A 0293900000 0 2-pole connection of LED This item has been replaced by SI 6 LD with the same functionality (see left side). Pay attention to the voltage ranges! DEK Standard S hite neutral DEK S S indiv. printed DEK S 2/6.5 609920000 540 S 2/6.5 609930000 08 DEK S 2/6.5 609920000 540 S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials ) Thermal rated current acc. to VDE 06 2) Maximum power loss.6 = 6.3 A, when used as short-circuit fuse only up to 5 A. 3) Rated voltage 500 V for centrically arranged fuse inserts or contact sleeves 3
Distribution terminals for N rail 0 x 3 Terminals/accessories DL 2.5/S/ NT/L/PE DL 2.5/S/ L/L Installation specifications for heavy-current installations up to 000 V (according to VDE 000; IEC 364) require an insulation measurement test of the erected installation. Special regulations stipulate an insulation measurement of all outgoing conductors (L, L 2, L 3, N) without making any disconnections. These requirements are met by the three-way terminal DL. Circuits can be connected on three levels across a width of only 6 mm in a clear and space-saving manner. Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated voltage/surge voltage/pollution severity A/4 mm 2 a r q # 6/84.5/48.7 8 mm/m 2.5/3.5 x 0.6 VDE 06 Part 4 250V/400V/24 A/2.5 mm 2 250V/400 V/4 kv/3.5 4 A/4 mm 2 a r q # 6/84.5/48.7 8 mm/m 2.5/3.5 x 0.6 IEC 60 947-7- 400 V/24 A/2.5 mm 2 400 V/.5 4 Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 DL 2.5/S Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size 0.3 4 A 3 0.3 4 A 3 N cross-connection with the proven busbar system 0 x 3 mm up to 40 A. The supply power of the busbar is fed directly via a separate clamping yoke (ZB 35) or a N disconnect terminal from the NT-series. Cont. current of cross-connect. Q multi-pole A for TS 35 / Dark beige emid 24 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 030600000 50 (NT connection 24 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 000000 50 coded blue) DL 2.5/S/L/L End plate Three-phase circuits can be realized by combining three-way terminals (L, NT, PE) with DL 2.5/S/L/L two-way terminals (L 2, L 3). Support plate AP DL 2.5/S 067700000 20 AP DL 2.5/S 067700000 20 for SSch 0 x 3 Blue emid HP DL 2.5/S Distance Thickness.5 mm HP-HP max. 200 mm 067980000 20 Small partition for Q Cross-connection (L/N/NT) Busbar 0 x 3 Distance f. upper edge busbar to upper edge of TS 35 = 25.5 mm Cu 40 A Clamping yoke Supply for SSch 0 x 3 6 50 mm 2 stranded 6 35 mm 2 flexible Gauge pin B9 N-Disconnect terminal as input terminals End bracket DEK Standard S hite neutral DEK S S indiv. printed TSch 0396000000 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 SSch 0 x 3 Cu 0348900000 m ZB 35 K 0502680000 50 NT 0 00980000 50 NT 6 N 09000000 50 NT 70 N 95220000 0 E 35 / 2 06200000 50 DEK 6 S 8/5 640740000720 S 8/5 773360000300 TSch 0396000000 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 E 35 / 2 06200000 50 DEK 6 S 8/5 640740000720 S 8/5 773360000300 Mounting rails, end brackets, further marking materials
Distribution terminals for N rail 0 x 3 DL 2.5/S blocks for a three-phase circuit for three AC circuits DL 2.5/S/N DL 2.5/S/L DL 2.5/S/ N/L DL 2.5/S/ N/L/PE DL 2.5/S/ L/L/PE -series A/4 mm 2 a r q # 2/8/84.5/48.7 8 mm/m 2.5/3.5 x 0.6 250V/400V/24 A/2.5 mm 2 250V/400V/4 kv/3 A/4 mm 2 a r q # 6/84.5/48.7 8 mm/m 2.5/3.5 x 0.6 IEC 60 947-7- 400 V/24 A/2.5 mm 2 400 V/ A/4 mm 2 a r q # 6/84.5/48.7 8 mm/m 2.5/3.5 x 0.6 IEC 60 947-7- 400 V/24 A/2.5 mm 2 400 V/ A/4 mm 2 a r q # 6/84.5/48.7 8 mm/m 2.5/3.5 x 0.6 IEC 60 947-7- 400 V/24 A/2.5 mm 2 400 V/ A/4 mm 2 a r q # 6/84.5/48.7 8 mm/m 2.5/3.5 x 0.6 250V/400V/24 A/2.5 mm 2 250V/400 V/4 kv/3 A/4 mm 2 a r q # 6/84.5/48.7 8 mm/m 2.5/3.5 x 0.6 250V/400V/24 A/2.5 mm 2 250V/400 V/4 kv/3.5 4 0.3 4 A 3 24.5 4 0.3 4 A 3 24.5 4 0.3 4 A 3 24.5 4 0.3 4 A 3 24.5 4 0.3 4 A 3 24.5 4 0.3 4 A 3 24 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. Block of 3; 030600000 = 034200000 25 Block of à piece 030600000 a. 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 030900000 50 (N connection coded blue) 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 03300000 50 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 030800000 50 (N connection coded blue) 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 030700000 50 (N connection coded blue) 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 0300000 50 000000 = 03400000 20 AP DL 2.5/S 067700000 20 AP DL 2.5/S 067700000 20 AP DL 2.5/S 067700000 20 AP DL 2.5/S 067700000 20 AP DL 2.5/S 067700000 20 AP DL 2.5/S 067700000 20 HP DL 2.5/S 067980000 20 TSch 0396000000 TSch 0396000000 TSch 0396000000 TSch 0396000000 TSch 0396000000 TSch 0396000000 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 SSch 0 x 3 Cu 0348900000 m ZB 35 K 0502680000 50 NT 0 00980000 50 NT 6 N 09000000 50 NT 70 N 95220000 0 E 35 / 2 06200000 50 E 35 / 2 06200000 50 E 35 / 2 06200000 50 E 35 / 2 06200000 50 E 35 / 2 06200000 50 E 35 / 2 06200000 50 DEK 6 S 8/5 640740000720 S 8/5 773360000300 DEK 6 S 8/5 640740000720 S 8/5 773360000300 DEK 6 S 8/5 640740000720 S 8/5 773360000300 DEK 6 S 8/5 640740000720 S 8/5 773360000300 DEK 6 S 8/5 640740000720 S 8/5 773360000300 DEK 6 S 8/5 640740000720 S 8/5 773360000300 33
Distribution terminals with N cross-connection QV Terminals/accessories DL 2.5/NT/L/PE DL 2.5/L/L Installation specifications for heavy-current installations up to 000 V (according to VDE 000; IEC 364) require an insulation measurement test of the erected installation. Special regulations stipulate an insulation measurement of all outgoing conductors (L, L 2, L 3, N) without making any disconnections. These requirements are met by the three-way terminal DL. Circuits can be connected on three levels across a width of only 6 mm in a clear and space-saving manner. DL 2.5 N cross-connection with the cross-connection system QV 4 from the -series. The supply power of the busbar is fed directly via a clamping yoke (4/6 mm 2 = A 4) into the terminal up to A. DL 2.5/L/L Three-phase circuits can be realized by combining three-way terminals (L, NT, PE) with DL 2.5/S/L/L two-way terminals (L 2, L 3). Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated voltage/impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to 60 947-7- Size Cont. current of cross-connect. Q multi-pole A Cont. current of cross-connect. QV 4 multi-pole A End plate for TS 35 / Dark beige emid A/4 mm 2 A/4 mm 2 a r q # a r q # 6/90/48.7 8 mm/m 2.5/3 2) /3.5 x 0.6 VDE 06 Part 4 250V/400V/24 A/2.5/4 2) mm 2 250V/400 V/4 kv/3 0.5 0.6 /6 2).5 4/6 2) /6 2) 2) 2) 0.3 4 A 3/A 4 2) 24 29 (central feed 40A) 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 029800000 50 (NT connection coded blue) AP DL 2.5 067800000 20 6/90/48.7 8 mm/m 2.5/3 2) /3.5 x 0.6 IEC 60 947-7- 400 V/24 A/2.5/4 2) mm 2 400 V/ 0.5 0.6 /6 2).5 4/6 2) /6 2) 2) 2) A 3/A 4 2) 24 3 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 030300000 50 AP DL 2.5 067800000 20 Small partition TSch 0396000000 TSch 0396000000 Cross-connection (L, NT, N) Cross-connection ) input (L, NT, N) Notching tool for QV Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 QV 4/2 05960000 50 QV 4/3 054560000 50 QV 4/4 054660000 50 QV 4/0 052060000 20 A 9004500000 Q 2 07500000 50 Q 3 07600000 50 Q 4 07700000 50 Q 0 07800000 20 Q 20 074200000 20 QV 4/2 05960000 50 QV 4/3 054560000 50 QV 4/4 054660000 50 QV 4/0 052060000 20 A 9004500000 End bracket DEK Standard S hite neutral DEK S S indiv. printed E 35 / 2 06200000 50 DEK 6 S 8/5 640740000720 S 8/5 773360000300 E 35 / 2 06200000 50 DEK 6 S 8/5 640740000 720 S 8/5 773360000300 Mounting rails, end brackets, further marking materials ) Cross-connection QV 4 2) Values refer to top left clamping unit (A4) 34
Distribution terminals with N-Cross-connection QV DL 2.5/N DL 2.5/L DL 2.5/N/L DL 2.5/N/L/PE DL 2.5/L/L/PE DL 2.5TR-DU DL 2.5TR-DU-PE -series 5 ) 4 ) A/4 mm 2 a r q # A/4 mm 2 a r q # A/4 mm 2 a r q # A/4 mm 2 a r q # A/4 mm 2 a r q # 6/90/48.7 8 mm/m 2.5/3 2) /3.5 x 0.6 6/90/48.7 8 mm/m 2.5/3 2) /3.5 x 0.6 6/90/48.7 8 mm/m 2.5/3 2) /3.5 x 0.6 6/90/48.7 8 mm/m 2.5/3 2) /3.5 x 0.6 6/90/48.7 8 mm/m 2.5/3 2) /3.5 x 0.6 only DU-PE: 3 A//4 mm 2 ( DU-PE 29 A) 6/90/48.7 8 mm/m 2.5/3 2) /3.5 x 0.6 IEC 60 947-7- 400 V/24 A/2.5/4 2) mm 2 IEC 60 947-7- 400 V/24 A/2.5/4 2) mm 2 IEC 60 947-7- 400 V/24 A/2.5/4 2) mm 2 250V/400V/24 A/2.5/4 2) mm 2 250V/400V/24 A/2.5/4 2) mm 2 250 V / 24 A / 2.5/ 4 2) mm 2 400 V/ 400 V/ 400 V/ 250V/400 V/4 kv/3 250V/400 V/4 kv/3 250 V / 4 kv/3 0.5 0.6 0.5 0.6 0.5 0.6 0.5 0.6 0.5 0.6 0.5 0.6 /6 2) /6 2) /6 2) /6 2) /6 2).5 4/6 2).5 4/6 2).5 4/6 2).5 4/6 2).5 4/6 2).5 4 /6 2) /6 2) /6 2) /6 2) /6 2) 2) 2) 2) 2) 2) 2) A 3/A 4 2) 2) A 3/A 4 2) 2) A 3/A 4 2) 2) A 3/A 4 2) 2) A 3/A 4 2) A 3 24 24 24 24 24 20 3 3 (central feed 40A) 3 40 300 V/5 A/22 2 AG 300 V/5 A/22 2 AG 300 V/5 A/22 2 AG 300 V/5 A/22 2 AG 300 V/5 A/22 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. 03000000 50 030400000 50 030000000 50 029900000 50 030200000 50 TR-DU 029820000 50 (N connection (N connection (N connection TR-DU-PE 02980000 50 coded blue) coded blue) coded blue) additional PE connection on bottom right side AP DL 2.5 AP DL 2.5 AP DL 2.5 AP DL 2.5 AP DL 2.5 AP DL 2.5 067800000 20 067800000 20 067800000 20 067800000 20 067800000 20 067800000 20 TSch 0396000000 TSch 0396000000 TSch 0396000000 TSch 0396000000 TSch 0396000000 Q 2 07500000 50 Q 2 07500000 50 Q 2 07500000 50 Q 2 07500000 50 Q 2 07500000 50 Q 2 07500000 50 Q 3 07600000 50 Q 3 07600000 50 Q 3 07600000 50 Q 3 07600000 50 Q 3 07600000 50 Q 3 07600000 50 Q 4 07700000 50 Q 4 07700000 50 Q 4 07700000 50 Q 4 07700000 50 Q 4 07700000 50 Q 4 07700000 50 Q 0 07800000 20 Q 0 07800000 20 Q 0 07800000 20 Q 0 07800000 20 Q 0 07800000 20 Q 0 07800000 20 Q 20 074200000 20 Q 20 074200000 20 Q 20 074200000 20 Q 20 074200000 20 Q 20 074200000 20 Q 20 074200000 20 QV 4/2 05960000 50 QV 4/2 05960000 50 QV 4/2 05960000 50 QV 4/2 05960000 50 QV 4/2 05960000 50 QV 4/2 05960000 50 QV 4/3 054560000 50 QV 4/3 054560000 50 QV 4/3 054560000 50 QV 4/3 054560000 50 QV 4/3 054560000 50 QV 4/3 054560000 50 QV 4/4 054660000 50 QV 4/4 054660000 50 QV 4/4 054660000 50 QV 4/4 054660000 50 QV 4/4 054660000 50 QV 4/4 054660000 50 QV 4/0 052060000 20 QV 4/0 052060000 20 QV 4/0 052060000 20 QV 4/0 052060000 20 QV 4/0 052060000 20 QV 4/0 052060000 20 A 9004500000 A 9004500000 A 9004500000 A 9004500000 A 9004500000 A 9004500000 E 35 / 2 06200000 50 E 35 / 2 06200000 50 E 35 / 2 06200000 50 E 35 / 2 06200000 50 E 35 / 2 06200000 50 DEK 6 DEK 6 DEK 6 DEK 6 DEK 6 DEK 6 S 8/5 640740000 720 S 8/5 640740000 720 S 8/5 640740000720 S 8/5 640740000720 S 8/5 640740000720 S 8/5 640740000720 S 8/5 773360000300 S 8/5 773360000300 S 8/5 773360000300 S 8/5 773360000300 S 8/5 773360000300 S 8/5 773360000300 2) Values refer only to top left clamping unit. 35
Terminals for temperature measuring circuits DU 2.5/TC eidmüller thermocouple terminals are specially designed to transmit very small voltages in temperature measuring circuits. Special busbars ensure that no false signals are transmitted in the terminal when temperature differences between the positive and negative paths exist. This high measuring precision is required, for example, in aircraft engine performance test rigs, complicated chemical processes, controllers, etc. Busbar material corresponds to thermal and compensating conductors Clear thermocouple marking 2-pole blocks per thermocouple Stacking width 0 mm Configuration of a temperature measuring circuit Thermocouple (sensor) 4 Reference junction 2 Thermocouple terminals 5 Supply conductors (to and from) 3 Compensating conductor 6 Measuring instrument The thermocouple terminals shown in this measuring circuit thermoelectrically transmit thermoelectric voltage from the thermocouple to the reference junction and the indicator unit via the compensating conductor. Thermocouple terminals are required for constructing a temperature circuit. Technical data Thermocouples acc. to IEC 584 (DIN 43 70) Busbar Cromel Alumel Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated impulse voltage acc. to VDE 00/.89/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to IEC 60 947-7- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A For thermocouples Type K NiCr Ni acc. to IEC 584 Type T Cu CuNi (DIN 4370) Type J Fe CuNi Type S u. R PT 0% Pt Rh/PT 3% Pt Rh Type B Pt 30% Rh Pt 6% Rh Type E NiCr CuNi Type N NiSil Nicrosil End plate Partition AP (thickness.5 mm) T (thickness.5 mm) Dark beige emid Dark beige emid 0/60/50.5 0 mm/m 2.5/3.5 x 0.6 / /2.5 mm 2 0.4...0.6.5 2.5 0.3 4 A 2 Cat. No. Qty. 02400000 50 024200000 50 024300000 50 024400000 50 033700000 50 033300000 50 04500000 50 AP 2.5-0 050000000 50 T 2.5-0 05000000 20 E-Copper Constantan Iron Konstantan E-Copper/ A-Copper S-Copper/ E-Copper Cromel- Constantan DEK Standard S white neutral DEK S S indiv. printed S 2/5 609860000 720 S 2/5 773380000 300 Mounting rails, end brackets, further marking materials 36
Feed-through terminals with SA plug adapter DU 4 SA Feed-through terminals for retrofitting electronic components PO 4 -series Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated impulse voltage acc. to VDE 00/.89/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to IEC 60 947-7- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A Dark beige emid Blue emid a r q 6/60/47 0 mm/m 3/3.5 x 0.6 400 V/34 A/4 mm 2 0.5...0 2.5 6 0.3 6 A 4 300 V/25 A/22 2 AG 300 V/ /22 2 AG Cat. No. Qty. 020000000 028000000 Max. technical data Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 Rated data IEC 60 947-7- Rated impulse voltage acc. to VDE 00/.89 /pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 / Gauge pin acc. to 60 947- Size ire diameter of electronic components mm Type Dark beige emid A/4 mm 2 a r q 6/60/47 9 mm/m 3/3.5 x 0.6 250 V/ A/4 mm 2 4 kv/3 0.5...0 2.5 4 0.3 4 A 3 0.8...0 mm 300 V/0 A / 26 2 AG 300 V/0 A / 26 2 AG Cat. No. Qty. PO4 036000000 50 End plate AP (thickness.5 mm) AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 Barrier Thickness 2.5 mm ZR 0700000 20 Partition T (thickness.5 mm) T 2.5-0 05000000 20 T 2.5-0 05080000 20 Busbar SSch7.3x.2 07200000 m Cross-connection Screening bar LS 2.8 LS 2.8 056400000 50 Plug adapter SA 2 380 V~/0 A/.5 mm 2 with Crimp connections with screw connection TOPP system Green Covers Crimp contact 0.5.5 mm 2 einzeln SA 2 ) 0502360000 3 ) 20 SA 2 2 ) 0529760000 3 ) 20 SA 2 TOP ) 333960000 3 ) 20 SA 2 TOP 2 ) 333860000 3 ) 20 SA 2 TOP 2 ) 334050000 3 ) 20 SA 2 TOP 2 ) 333760000 4 ) 20 AH 2/3 053660000 20 AH 2/4 0405360000 20 AH 2/5 0405560000 20 AH 2/2 040660000 20 C E/L 5) 098500000200 PO 4 with fiited varistor eidmüller varistor terminals have been designed for retrofitting electronic components, such as varistors, diodes, gas discharge tubes, etc. These electronic terminals no longer have to be configured prior installation to subsequently be delivered with soldered components which can no longer be distinguished. The significant advantages of this design are: Cost saving Components can be changed quickly on site. Service is limited to visual inspection Clarity: Components are easy to distinguish. Flexibility: Components can immediately be adapted to changed conditions. Note: Never change electronic components in energized systems Overvoltage in a three-phase supply discharged to earth via PE 4 with the aid of varistors and a gas discharge tube. DEK Standard S white neutral DEK S S indiv. printed DEK 6 S 2/6 609900000600 S 2/6 6099000020 DEK Standard S white neutral DEK S S indiv. printed DEK 6 S 2/6 609900000600 S 2/6 6099000020 Mounting rails, end brackets, further marking materials ) ith hook 3) ith dovetail 5) Crimping tool, type CZ 22E 0560400000 2) without Rasthaken 4) ithout dovetail hen using the screening bar rated data is reducedata! reduced! 37
Terminals with plug-in connection for BLA/BLZ connectors DU.5/BLA DU.5/LD/BLA with red LED DU.5/R/BLA negative return conductor in blue DK 2.5/BLA R 5.08 250 V Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated impulse voltage acc. to VDE 00/.89 /pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to IEC 60 947-7- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A Type Standard Blue ith red LED ith red LED ith red LED ith red LED Fixed-pole blocks on request End plate/fixing bracket 4) AP (thickness 2.5 mm) Cross-connection QV BB orange (thickness 5 mm) a r q a r q a r q 5.08/45.4/57.5 3) /45.0/55.5 3) 5.08/45.4/57.5 3) /45.0/55.5 3) 5.08/45.4/57.5 3) /45.0/55.5 3) 5.08/58/53/63.5 3) 0 mm/m 2.5/3.5 x 0.6 250 V/0 (2x8) A/.5 mm 2 4 kv/3 0.4...0.6 /2.5.5 2.5/.5 /.5 /.5 ) /.5 0 mm/m 2.5/3.5 x 0.6 V/0 (2x8) A/.5 mm 2 0.4...0.6 /2.5.5 2.5/.5 /.5 /.5 ) /.5 0 mm/m 2.5/3.5 x 0.6 V/ A/.5 mm 2 0.4...0.6 /2.5.5 2.5/.5 /.5 /.5 ) /.5 0.3 4 A 3/A 0.3 4 A 3/A 0.3 4 A 3/A 300 V/20 (2x0) A/26 6 AG 300 V/0 A/26 2 AG 300 V/20 (2x0) A/26 6 AG 2 0 V/0 A/26 2 AG 300 V/20 (2x0) A/26 6 AG / /26 2 AG Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. 57726000000 5773000000 2 V 57727000000 24 V 57728000000 ith pin 5770000 50 ith pin 5770000 50 ith pin 5770000 50 ithout pin 577330000 50 ithout pin 577330000 50 ithout pin 577330000 50 ith pin 068260000 0 ith pin 068260000 0 ith pin 068260000 0 ithout pin 06860000 0 ithout pin 06860000 0 ithout pin 06860000 0 QV 2.5/2 053660000 50 QV 2.5/2 053660000 50 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/3 053760000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV 2.5/4 053860000 50 QV 2.5/4 053860000 50 QV 2.5/0 054460000 20 QV 2.5/0 054460000 20 QV 2.5/0 054460000 20 0 mm/m 2.5/3.5 x 0.6 250 V/7.5 2 ) A/2.5 mm 2 4 kv/3 0.4...0.6 /2.5.5 2.5/.5 /.5 /.5 ) /.5 0.3 4 A 3/A Cat. No. Qty. 0380000000 ith pin 07000000 20 ithout pin 070000000 20 ith pin 072760000 0 ithout pin 072660000 0 Cross-connection comb insul. QB A/2 578950000 50 QB A/3 578960000 50 QB A/4 578970000 50 QB A/0 578990000 20 Negative conductor busbar 0.5 x 4 x 20 mm Notching tool for QV A 9004500000 A 9004500000 ML-SSch 0600000 3 A 9004500000 ML-SSch 0600000 3 Cover for unassigned pins AD 5/2 577400000 20 AD 5/2 577400000 20 AD 5/2 577400000 20 AD 5/2 577400000 20 Coding element SLA-KO 356000000 SLA-KO 356000000 SLA-KO 356000000 SLA-KO 356000000 Socket strips No. poles BLA 2 24 BLA 2 24 B 4 BLZ 2 24 B 6 BLZ 2 24 ith lateral 8 dovetail 4 guide 6 8 BLA 4 2896000000 BLA 6 28260000 50 BLA 8 282360000 50 BLA 4 B 35626000000 BLA 6 B 356460000 50 BLA 8 B 356660000 50 BLA 4 2896000000 BLA 6 28260000 50 BLA 8 282360000 50 BLA 4 B 35626000000 BLA 6 B 356460000 50 BLA 8 B 356660000 50 BLA 4 2896000000 BLA 6 28260000 50 BLA 8 282360000 50 BLA 4 B 35626000000 BLA 6 B 356460000 50 BLA 8 B 356660000 50 BLA 4 2896000000 BLA 6 28260000 50 BLA 8 282360000 50 BLA 4 B 35626000000 BLA 6 B 356460000 50 BLA 8 B 356660000 50 DEK Standard S white neutral DEK S S indiv. printed S 2/5 609860000 720 S 2/5 773380000 300 S 2/5 609860000 720 S 2/5 773380000 300 S 2/5 609860000 720 S 2/5 773380000 300 S 2/5 609860000 720 S 2/5 773380000 300 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diameter with 5 mm pitchpitch 5 mm: Cat. No. 33300000 2) 20 C ambient temperature 3) ith BLA 4) Set for screwing the connector to the terminal strip 38
Terminals with plug-in connection for BLA/BLZ connectors DU.5/BLZ 5.08 ZQV DU.5/BLZ/ LD/5.08 ith red LED DU.5/BLZ/ R 5.08 Negative return conductor in blue DK 2.5/BLZ R 5.08 250 V DU 2.5/BLZ R 7.62 400 V DK 2.5/BLZ R 7.62 400 V -series a r q a r q a r q a 5.08/45.4/57.5 3) /45.0/55.5 5.08/45.4/57.5 3) /45.0/55.5 3) 5.08/45.4/57.5 3) /45.0/55.5 3) 5.08/58/53/63.5 3) 7.62/45.4/57.5 3) /45.0/55.5 0 mm/m 2.5/3.5 x 0.6 0 mm/m 2.5/3.5 x 0.6 0 mm/m 2.5/3.5 x 0.6 0 mm/m 2.5/3.5 x 0.6 0 mm/m 2.5/3.5 x 0.6 7.62/58/53/63.5 3) 0 mm/m 2.5/3.5 x 0.6 250 V/0 (2x8) A/.5 mm 2 4 kv/3 V/0 (2x8) A/.5 mm 2 V/ A/.5 mm 2 250 V/8 2) A/2.5 mm 2 4 kv/3 400 V/24(2x2) 2) (2x8) A/.5 mm 2 400 V/20 2) A/2.5 mm 2 0.4...0.6 0.4...0.6 0.4...0.6 0.4...0.6 0.4...0.6 0.4...0.6 /4.5 2.5/2.5 /2.5 /2.5 /2.5 ) 0.3 4 A 3/A 3 /4.5 2.5/2.5 /2.5 /2.5 /2.5 ) 0.3 4 A 3/A 3 /4.5 2.5/2.5 /2.5 /2.5 /2.5 ) 0.3 4 A 3/A 3 /4.5 2.5/2.5 /2.5 /2.5 /2.5 ) 0.3 4 A 3/A 3 /4.5 2.5/2.5 /2.5 /2.5 /2.5 ) 0.3 4 A 3/A 3 /4.5 2.5/2.5 /2.5 /2.5 /2.5 ) 0.3 4 A 3/A 3 300 V/20 (2 x 0) A/26 6 AG 300 V/0 A/26 2 AG for QV Qty. for ZQV Qty. 57734000000 784460000 00 59690000000 784470000 00 300 V/20 (2 x 0) A/26 6 AG 2 0 V/0 A/26 2 AG Cat. No. Qty. 2 V 57735000000 24 V 57736000000 48 V 57737000000 300 V/20 (2 x 0) A/26 6 AG / /26 2 AG Cat. No. Qty. 57739000000 300 V/0 A/26 2 AG Cat. No. Qty. 03440000000 Cat. No. Qty. 038900000 00 Cat. No. Qty. 03850000000 ith pin 5770000 50 ithout pin 577330000 50 ith pin 068260000 0 ithout pin 06860000 0 for QV Qty. for ZQV Qty. 053660000 50 693800000 60 053760000 50 69380000 60 053860000 50 693820000 60 054460000 20 693880000 20 ith pin 5770000 50 ithout pin 577330000 50 ith pin 068260000 0 ithout pin 06860000 0 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV 2.5/0 054460000 20 ith pin 5770000 50 ithout pin 577330000 50 ith pin 068260000 0 ithout pin 06860000 0 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV 2.5/0 054460000 20 ith pin 07000000 20 ithout pin 070000000 20 ith pin 072760000 0 ithout pin 072660000 0 Cross-connection comb insul. QB A/2 578950000 50 QB A/3 578960000 50 QB A/4 578970000 50 QB A/0 578990000 20 ith pin 5770000 50 ithout pin 577330000 50 ith pin 073600000 0 ithout pin 073500000 0 ith pin 07000000 20 ithout pin 070000000 20 ith pin 072960000 0 ithout pin 072860000 0 A 9004500000 A 9004500000 A 9004500000 ML-SSch 0600000 3 ML-SSch 0600000 3 AD 5/2 577400000 20 AD 5/2 577400000 20 AD 5/2 577400000 20 AD 5/2 577400000 20 AD 5/2 577400000 20 AD 5/2 577400000 20 BLZ-KO 5457000000 BLZ-KO 5457000000 BLZ-KO 5457000000 BLZ-KO 5457000000 BLZ-KO 54570000 00 BLZ-KO 5457000000 BLZ 4 52666000000 BLZ 6 526860000 50 BLZ 8 527060000 50 BLZ 4 B 52896000000 BLZ 6 B 52960000 50 BLZ 8 B 529360000 50 BLZ 4 52666000000 BLZ 6 526860000 50 BLZ 8 527060000 50 BLZ 4 B 52896000000 BLZ 6 B 52960000 50 BLZ 8 B 529360000 50 BLZ 4 52666000000 BLZ 6 526860000 50 BLZ 8 527060000 50 BLZ 4 B 52896000000 BLZ 6 B 52960000 50 BLZ 8 B 529360000 50 BLZ 4 52666000000 BLZ 6 526860000 50 BLZ 8 527060000 50 BLZ 4 B 52896000000 BLZ 6 B 52960000 50 BLZ 8 B 529360000 50 BLZ 4 623070000 00 BLZ 6 623090000 50 BLZ 8 6230000 50 BLZ 4 B 623400000 00 BLZ 6 B 623420000 50 BLZ 8 B 623440000 50 BLZ 4 62307000000 BLZ 6 623090000 50 BLZ 8 6230000 50 BLZ 4 B 62340000000 BLZ 6 B 623420000 50 BLZ 8 B 623440000 50 S 2/5 609860000 720 S 2/5 773380000 300 S 2/5 609860000 720 S 2/5 773380000 300 S 2/5 609860000 720 S 2/5 773380000 300 S 2/5 609860000 720 S 2/5 773380000 300 S 2/6.5 609920000 540 S 2/6.5 609930000 08 S 2/6.5 609920000 540 S 2/6.5 609930000 08 ) Ferrules with optimum diameter for terminals with 5 mm pitch: Cat. No. 33300000 3) ith BLZ 2) 20 C ambient temperature 39
Feed-through terminals DU 2.5 F DU 2.5 FF DK 2.5 F DK 2.5 FV Max. technical data Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 Rated data Rated cross-section of clamping yoke Rated cross-section of 2.8 mm push-on tab/solder connection Rated impulse voltage acc. to VDE 00/.89/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to IEC 60 947-7- Size Cont. current of cross-connect. 2-pole A Cont. current of cross-connect. multi-pole A Dark beige emid Dark beige emid Dark beige emid Dark beige emid Blue emid End plate/partition emid Blue emid AP (thickness 3 mm) emid AP 2.5 (thickness.5 mm) T (thickness.5 mm)emid Cross-connection QV Test adapter TA TA LS 2.8 Screening bar Notching tool for QV 2 A/- a r i q LR 5/60/47 0 mm/m 2.5/3.5 x 0.6 500 V m. IH/2 (2x6) A 2.5 mm 2 / - mm 2 0.4...0.8.5 4 ) 0.3 4 A 3 2 2 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 02800000 00 AP 2.5-0 050000000 50 AP2.5-0 050080000 50 T2.5-0 05000000 20 T2.5-0 05080000 20 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV2.5/0 054460000 20 QB B/24 579060000 20 LS 2.8 056400000 50 A 9004500000 TA 0535860000 20 2 A/- a r i q LR 5/60/47 0 mm/- 500 V m. IH/2 (2x6) A / - mm 2 0.5 2 2 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 02900000 00 AP 2.5-0 050000000 50 AP2.5-0 050080000 50 T2.5-0 05000000 20 T2.5-0 05080000 20 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV2.5/0 054460000 20 LS 2.8 056400000 50 A 9004500000 TA 0535860000 20 2 A/- a r i q LR 5/69/63 0 mm/m 2.5/3.5 x 0.6 400 V m. IH/2 (2x6) A/2.5 2.5 mm 2 / - mm 2 0.4...0.6 /.5 2.5 ) 0.3 4 A 3 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 02600000 00 AP 05900000 20 AP 05980000 20 T (Ex) e 058800000 20 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV2.5/0 054460000 20 QB A/24 579000000 20 LS 2.8 056400000 50 A 9004500000 TA 0535860000 20 2 A/- a r q LR 5/69/63 0 mm/m 2.5/3.5 x 0.6 400 V m. IH/2 (2x6) A/2.5 2.5 mm 2 / - mm 2 0.4...0.6 /.5 2.5 ) 0.3 4 A 3 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 022400000 00 AP 05900000 20 T (Ex) e 058800000 20 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV2.5/0 054460000 20 QB A/24 579000000 20 LS 2.8 056400000 50 A 9004500000 TA 0535860000 20 Strain relief Test plugs/sockets/insulating sleeves PS 2.3 StB 8.5 Insulating sleeves IH 2.8 0386060000 00 IH 2.8 0386060000 00 IH 2.8 0386060000 00 IH 2.8 0386060000 00 Cover AD with symbol AD white for self-labelling Group marking T 4 T 5 GB Tag carrier for S 0 markers DEK Standard S white neutral DEK S S indiv. printed ADP 2 048530000020xm HP 2 0485660000 20 T 5 0348500000 00 SF 0 03400000000 SG 0 03500000000 DEK S 2/5 609860000 720 S 2/5 773380000 300 ADP 2 048530000020xm HP 2 0485660000 20 T 4 34060000 00 SF 0 03400000000 SG 0 03500000000 DEK S 2/5 609860000 720 S 2/5 773380000 300 ADP 3 048540000020xm HP 3 0485760000 20 T 4 34060000 00 SF 0 03400000000 SG 0 03500000000 S 8/5 640740000 720 S 8/5 773360000 300 ADP 3 048540000020xm HP 3 0485760000 20 T 4 34060000 00 SF 0 03400000000 SG 0 03500000000 S 8/5 640740000 720 S 8/5 773360000 300 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diameter for terminals with 5 mm pitch: Cat. No. 33300000 hen using the screening bar rated data is reducedata! 40
Feed-through terminals DK 2.5 FF DK 2.5 FFV DK 2.5 T DU 2.5 T DU 2.5 L DK 2.5 TT DU 2.5 LL TR 2.5 L TR 2.5 LL -series 2 A/- 2 A/- 0 A/- a r i q LR a r q LR 5/75/63 5/75/63 5/69/63/78 5/60/47/70 5/60/64/47 5/60/64/47 0 mm/m 2.5/3.5 x 0.6 0 mm/m 2.5/3.5 x 0.6 0 mm/m 2.5/3.5 x 0.6 0 mm/m 2.5/3.5 x 0.6 0 A/- 5 A/- 0 A/- 500 V m. IH/2 (2x6) A / - mm 2 500 V m. IH/2 (2x6) A / - mm 2 25 V/0 A 2.5 mm 2 2.5 kv/3 25 V/0 A/2.5 mm 2 2.5 mm 2 2.5 kv/3 400 V/5 A/2.5 2.5 mm 2 - /.5 mm 2 400 V/4 A 2.5 mm 2 - /.5 mm 2 0.4...0.6 0.4...0.8 0.4...0.8 0.4...0.8 0.5 0.5.5 4 ) 0.3 4 A 3.5 4 ) 0.3 4 A 3 /.5 0.5/.5 4/.5 /.5 ) 0.3 4 A 3 5 5 /.5.5 4/.5 0.5 4/.5 0.5...2.5 0.5...2.5 ) 0.3 4 A 3 26 26 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 02700000 00 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. 022500000 00 Cat. No. Qty. ri.pin0.8x.6se 023800000 00 ri.pin0.8x2.4 se 023900000 00 ri.+ le.0.8x2.4se 577200000 00 Cat. No. Qty. le., pin x 022000000 00 re., pin x 022700000 00 le.pin0.8x2.4se 02200000 00 le.pin0.8x2.4wa036900000 00 Cat. No. Qty. Screw-solder 02200000 00 Solder-solder022200000 00 Cat. No. Qty. Screw-solder 03800000 00 Solder-solder03900000 00 AP 05900000 20 AP 05980000 20 T (Ex) e 058800000 20 AP 05900000 20 T (Ex) e 058800000 20 AP 2.5-005900000 50 AP 2.5-005980000 50 T2.5-0 05000000 20 T2.5-0 05080000 20 AP2.5-0 050000000 50 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 T2.5-005000000 20 T 2.5-005080000 20 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 T2.5-005000000 20 T2.5-005080000 20 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV2.5/0 054460000 20 LS 2.8 056400000 50 A 9004500000 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV 2.5/0054460000 20 LS 2.8 056400000 50 A 9004500000 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV 2.5/0054460000 50 LS 2.8 056400000 50 A 9004500000 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV 2.5/0054460000 50 LS 2.8 056400000 50 A 9004500000 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 QV 2.5/0054460000 50 LS 2.8 056400000 50 A 9004500000 QL 2 025860000 00 QL 3 025900000 00 QL 4 026000000 50 QL 0 0338000000 20 BS-M 2.5x4.5 062700000 00 TA 0535860000 20 TA 0535860000 20 TA 0535860000 20 TA 5/ 05260000 25 TA 5/ 05260000 25 TA 2 60000 50 TA 2/ZA 6330000 50 TA 2/0 6340000 5 ZE 650000 50 IH 2.8 0386060000 00 IH 2.8 0386060000 00 PS2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 PS2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 PS2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 ADP 3 0485400000 20xm HP 3 0485760000 20 ADP 3 0485400000 20xm HP 3 0485760000 20 AD 5 053460000 50 AD 5 white 056060000 50 T 4 34060000 00 SF 0 03400000000 SG 0 03500000000 T 4 34060000 00 SF 0 03400000000 SG 0 03500000000 T 4 34060000 00 SF 0 03400000000 SG 0 03500000000 T 4 34060000 00 SF 0 03400000000 SG 0 03500000000 GB 5 050760000 50 T 5 0348500000 00 SF 0 03400000000 SG 0 03500000000 T 5 0348500000 00 SF 0 03400000000 SG 0 03500000000 S 8/5 640740000 720 S 8/5 773360000 300 S 8/5 640740000 720 S 8/5 773360000 300 S 8/5 640740000 720 S 8/5 773360000 300 S 2/5 609860000 720 S 2/5 773380000 300 S 2/5 609860000 720 S 2/5 773380000 300 DEK S 2/5 609860000 720 S 2/5 773380000 300 4
Feed-through terminals DU.5/R 3.5 DK.5/R 3.5 PE.5/R 3.5 Dimensions/approvals a r q U a r q U U idth/length/height (mm) with TS 5 x 7.5 U 3.5/24.5/25 3.5/46.5/38.5 3.5/24.5/25 7 (-) mm/m 2/0.4 x 2.5 7 (-) mm/m 2/0.4 x 2.5 7 (-) mm/m 2/0.4 x 2.5 VDE rated data 06 Part / IEC 60 947-7- 400 V/7.5 A/.5 mm 2 400 V/6 A/.5 mm 2 / /.5 mm 2 Rated impulse voltage/pollution severity 4 kv/3 4 kv/3 4 kv/3 0.3...0.4 0.3...0.4 0.3...0.4 0.5.5 0.5.5 0.5.5.5.5.5 0.5.5 0.5.5 0.5.5 Flexible with ferrule acc. to DIN 46 228/ mm 2 0.5.5 0.5.5 0.5.5 Flexible with ferrule with plastic insul. collar mm 2 0.5 0.5 0.5 Gauge pin acc. to IEC 60 947-7- Size A A A 300 V/0 A/26...4 AG 300 V/0 A/26...4 AG 300 V/0 A/26...4 AG 300 V/0 A/26...4 AG U TS5 Cat. No. Qty. U TS5 Cat. No. Qty. U TS5 Cat. No. Qty. Dark beige emid DU.5/R 3.5 7580000 00 DK.5/R 3.5 7590000 00 Blue emid DU.5/R 3.5 BL 75470000 00 DK.5/R 3.5 BL 75480000 00 Green-yellow emid PE.5/R 3.5 798400000 00 End plates/partitions AP (thickness.5 mm) Dark beige emid AP DU.5/R3.5 75490000 20 AP DK.5/R3.5 754200000 20 Cross-connections ZQV 2-pole ZQV.5/R3.5/2 GE 75420000 60 ZQV.5/R3.5/2 GE 75420000 60 3-pole ZQV.5/R3.5/3 GE 754220000 60 ZQV.5/R3.5/3 GE 754220000 60 4-pole ZQV.5/R3.5/4 GE 754230000 60 ZQV.5/R3.5/4 GE 754230000 60 5-pole ZQV.5/R3.5/5 GE 754240000 20 ZQV.5/R3.5/5 GE 754240000 20 6-pole ZQV.5/R3.5/6 GE 754250000 20 ZQV.5/R3.5/6 GE 754250000 20 7-pole ZQV.5/R3.5/7 GE 754260000 20 ZQV.5/R3.5/7 GE 754260000 20 8-pole ZQV.5/R3.5/8 GE 754270000 20 ZQV.5/R3.5/8 GE 754270000 20 9-pole ZQV.5/R3.5/9 GE 754280000 20 ZQV.5/R3.5/9 GE 754280000 20 0-pole ZQV.5/R3.5/0 GE 754290000 20 ZQV.5/R3.5/0 GE 754290000 20 30-pole ZQV.5/R3.5/30 GE 754300000 0 ZQV.5/R3.5/30 GE 754300000 0 Screwdriver SDI 0.4 x 2.5 9008370000 SDI 0.4 x 2.5 9008370000 SDI 0.4 x 2.5 9008370000 Consecutive vertical /3.5 FS -0 762000 500 /3.5 FS -0 762000 500 /3.5 FS -0 762000 500 /3.5 FS -20 76200 500 /3.5 FS -20 76200 500 /3.5 FS -20 76200 500 /3.5 FS 2-30 762002 500 /3.5 FS 2-30 762002 500 /3.5 FS 2-30 762002 500 /3.5 FS 3-40 762003 500 /3.5 FS 3-40 762003 500 /3.5 FS 3-40 762003 500 /3.5 FS 4-50 762004 500 /3.5 FS 4-50 762004 500 /3.5 FS 4-50 762004 500 /3.5 FS 5-60 762005 500 /3.5 FS 5-60 762005 500 /3.5 FS 5-60 762005 500 /3.5 FS 6-70 762006 500 /3.5 FS 6-70 762006 500 /3.5 FS 6-70 762006 500 /3.5 FS 7-80 762007 500 /3.5 FS 7-80 762007 500 /3.5 FS 7-80 762007 500 /3.5 FS 8-90 762008 500 /3.5 FS 8-90 762008 500 /3.5 FS 8-90 762008 500 /3.5 FS 9-00762009 500 /3.5 FS 9-00762009 500 /3.5 FS 9-00762009 500 Consecutive horizontal /3.5 MC neutral /3.5 MC neutral /3.5 MC neutral 755270000 500 755270000 500 755270000 500 /3.5 MC G 75528000 500 /3.5 MC G 75528000 500 /3.5 MC G 75528000 500 /3.5 MC G 2 755280002 500 /3.5 MC G 2 755280002 500 /3.5 MC G 2 755280002 500 /3.5 MC G 3 755280003 500 /3.5 MC G 3 755280003 500 /3.5 MC G 3 755280003 500 /3.5 MC G 4 755280004 500 /3.5 MC G 4 755280004 500 /3.5 MC G 4 755280004 500 /3.5 MC G 5 755280005 500 /3.5 MC G 5 755280005 500 /3.5 MC G 5 755280005 500 /3.5 MC G 6 755280006 500 /3.5 MC G 6 755280006 500 /3.5 MC G 6 755280006 500 /3.5 MC G 7 755280007 500 /3.5 MC G 7 755280007 500 /3.5 MC G 7 755280007 500 /3.5 MC G 8 755280008 500 /3.5 MC G 8 755280008 500 /3.5 MC G 8 755280008 500 /3.5 MC G 9 755280009 500 /3.5 MC G 9 755280009 500 /3.5 MC G 9 755280009 500 /3.5 MC G 0 75528000 500 /3.5 MC G 0 75528000 500 /3.5 MC G 0 75528000 500 Mounting rails, end brackets, further marking materials 42
Feed-through terminals with push-on tab AST AST 4 AST 5 SAK 4 S/35 SAK 4 SS/35 -series Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 6.5/58/46 6.5/40/40 6.5/58/46 6.5/40/49.5 9 mm/m 2.5/3.5 x 0.6 2 mm/m 3/3.5 x 0.6 2 mm/m 3/3.5 x 0.6 Rated data Rated cross-section of clamping yoke 500 V )/ - /2.5 500 V )/ - /2.5 2.5 mm 2 500 V )/ - /2.5 4 mm 2 500 V )/6 A/2.5 4 mm 2 Rated cross-section of push-on tab 6.3/2.8 mm 2.5 / mm 2 2.5 / mm 2 2.5 / mm 2 2.5 / mm 2 Rated impulse voltage acc. to VDE 00/.89/pollution severity 0.4 0.7 0.5.0 0.5.0 2 2.5 2.5.5 2.5.5 2.5 Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Gauge pin acc. to 60 947-7- Size A 2 A 4 A 4 Cont. current of cross-connect. 2-pole A (QL 2 0) 36 (QL 2 0) 36 (QL 2 0) 36 (QL 2 0) 36 Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Slotted dark beige emid 0699600000 50 046040000000 0664900000 50 SAK 4 S 063030000000 Unslotted dark beige emid 0664800000 50 0699700000 50 (Screw/push-on tab = S SAK 4 SS 063040000000 (Push-on tab/tab = SS) End plate/partition/small partition (thickness mm) Dark beige emid AP (.5) 0266400000 20 AP (.5) 0460490000 20 AP (.5) 0266400000 20 AP (.5) 00500000 20 beige PA TSch 0396000000 TSch 03960000 00 TSch 0396000000 TSch 0396000000 AP TSch Cross-connection 2-pole Q 2 0336700000 50 Q 2 0336700000 50 Q 2 0336700000 50 QL 2 03060000000 3-pole Q 3 0336800000 50 Q 3 0336800000 50 Q 3 0336800000 50 QL 3 03070000000 4-pole Q 4 0336900000 50 Q 4 0336900000 50 Q 4 0336900000 50 QL 4 030800000 50 0-pole Q 0 0368800000 20 Q 0 0368800000 20 Q 0 0368800000 20 QL 0 0338200000 20 Q 3 QL BS BS M 3 x 4.5 59000000 Plug adapter 2-pole STA 2.5/2 06586000000 3-pole STA 2.5/3 065960000 50 4-pole STA 2.5/4 090360000 50 Only clips onto PA vers. 5-pole STA 2.5/5 066060000 50 of AST3 and AST4 8-pole STA 2.5/8 06660000 50 Test plug/socket Plug test socket without using QL for TS StB 4 068600000 50 StB 4 068600000 50 StB 4 068600000 50 PS StB PS 2.3 080400000 20 PS 2.3 080400000 20 PS 2.3 080400000 20 Insulating sleeves IH 2.8 038606000000 IH 2.8 038606000000 IH 2.8 038606000000 IH 2.8 038606000000 IH 6.3 038626000000 IH 6.3 038626000000 IH 6.3 038626000000 IH 6.3 038626000000 F/FS/... DEK 6.5 DEK 6 DEK 6.5 DEK 6.5 Mounting rails, end brackets, further marking materials ) with Insulating sleeves 2) Touch-safe with prof. material for cover ADP4 43
Feed-through terminals for initiators and actuators DLI 2.5 DB DLI 2.5 LD DB PNP DLI 2.5 LD DB NPN DLD 2.5 DB 2 ) Dimensions/approvals a r # a r # a r # a r # idth/length/height (mm) with TS 35 x 7.5 6/65/49 6/65/49 6/65/49 6/82/49 7 mm/m 2.5/3.5 x 0.6 7 mm/m 2.5/3.5 x 0.6 7 mm/m 2.5/3.5 x 0.6 7 mm/m 2.5/3.5 x 0.6 Rated data IEC 60 947-7- 250 V/20 A/2.5 mm 2 5 30 V-/20 A/2.5 mm 2 5 30 V-/20 A/2.5 mm 2 250 V/24 A/2.5 mm 2 Rated impulse voltage/pollution severity 4 kv/3 0. 0. 4 kv/3.5 4.5 4.5 4.5 4 Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Gauge pin acc. to IEC 60 947-7- Continuous current of terminal for conductor size Size A 3 20 A/2.5 mm 2 A 3 20 A/2.5 mm 2 A 3 20 A/2.5 mm 2 A 3 Cont. current of cross-connect. 2 5-pole A (Q 2 0) 20 (Q 2 0) 20 (Q 2 0) 20 (Q 2 0) 20 Cont. current of cross-connect. 6 0-pole A 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG Cat. No. Qty. Cat. No. Qty. Cat. No.. Qty. Cat. No. Qty. Standard emid 783820000 00 78480000 50 with diode N4007 emid ith red LED (5 30 V) emid 783980000 00 783950000 00 ith green LED (5 30 V) emid 783970000 00 783940000 00 with LED and diode N4007 emid with LED and diode N4007 emid Block of 0 ) emid (w/o dekafix) 783850000 0 (red LED) 783920000 0 Block of 0 ) emid (w. dekafix) 783830000 0 (green LED) 789300000 0 Fuse inserts emid End plate/small partition AP-DLI AP-DLD Part-AP TSch AP 783550000 20 AP 783550000 20 AP 783550000 20 AP 78420000 20 AP (part-ap) 784220000 20 TSch 03960000 00 TSch 03960000 00 TSch 03960000 00 TSch 03960000 00 (thickness.5 mm) Test plug/socket StB 8.5 2) (ø 2.3) StB 8.5 2) (ø 2.3) StB 8.5 PS 025700000 50 025700000 50 PS 2.3 080400000 20 PS 2.3 080400000 20 Cross-connection Q 3 Q 2 500000 50 Q 2 500000 50 Q 2 500000 50 Q 2 500000 50 Q 3 600000 50 Q 3 600000 50 Q 3 600000 50 Q 3 600000 50 Q 4 700000 50 Q 4 700000 50 Q 4 700000 50 Q 4 700000 50 Q 0 3300000 20 Q 0 3300000 20 Q 0 3300000 20 Q 0 3300000 20 Q 20 399800000 20 Q 20 399800000 20 Q 20 399800000 20 Q 20 399800000 20 VQB QL 2 0297200000 00 QL 2 0297200000 00 QL 2 0297200000 00 QL 2 0297200000 00 VH 4.2 345800000 00 VH 4.2 345800000 00 VH 4.2 345800000 00 VH 4.2 345800000 00 Snap fit, external crossconnection VQB.5. For cross-connections for more than 20 terminals, replace VH with VH 4.2 Cat. No. 345800000 without internal thread VQB.5/50BL 6380000 5 VQB.5/50RT 6390000 5 VQB.5/50 S63520000 5 VQB.5/50 BL6380000 5 VQB.5/50RT 6390000 5 VQB.5/50 S 63520000 5 VQB.5/50 BL6380000 5 VQB.5/50RT 6390000 5 VQB.5/50 S 63520000 5 VQB.5/50 BL6380000 5 VQB.5/50RT 6390000 5 VQB.5/50 S 63520000 5 Group marking T 4 T 4 34060000 00 T 4 34060000 00 T 4 34060000 00 T 4 34060000 00 SF 0 03400000000 SF 0 03400000000 SF 0 03400000000 SF 0 03400000000 SG 0 03500000000 SG 0 03500000000 SG 0 03500000000 SG 0 03500000 000 Cover HP 4 ADP 0485400000 20 ADP 0485400000 20 ADP 0485400000 20 ADP 0485400000 20 HP 4 0485860000 20 HP 4 0485860000 20 HP 4 0485860000 20 HP 4 0485860000 20 F/FS/... DEK 6 DEK 6 DEK 6 DEK 6 Mounting rails, end brackets, further marking materials ) DLI 2.5/35/0 = Block of 0 with built-in cross-connections 2) StB 8.5 only in upper busbar 44
Feed-through terminals for initiators and actuators DLA 2.5 DB DLA 2.5/D DB DLA 2.5/LD DB DLA 2.5/LD/D DB DLD 2.5/PE DB KDKS/ PE -series a r q # a r q # a r q # a r q # a r # a # 6/65/49 6/65/49 6/65/49 6/65/49 6/74.5/49 8/9/65 7 mm/m 2.5/3.5 x 0.6 7 mm/m 2.5/3.5 x 0.6 7 mm/m 2.5/3.5 x 0.6 7 mm/m 2.5/3.5 x 0.6 7 mm/m 2.5/3.5 x 0.6 8 mm/m 3/M 2.5 3) /3.5 x 0.6 250 V ) /7.5 A/2.5 mm 2 250 V ) /7.5 A/2.5 mm 2 5 30 V/7.5 A/2.5 mm 2 5 30 V/7.5 A/2.5 mm 2 250 V ) /7.5 A/2.5 mm 2 500 V/6.3 A/4 mm 2 4 kv/3 4 kv/3 0. 0. 4 kv/3 0.5 /0.4 0.7 3) 2/ 3).5 4.5 4.5 4.5 4.5 4.5 4 A 3 20 A/2.5 mm 2 A 3 20 A/2.5 mm 2 A 3 20 A/2.5 mm 2 A 3 20 A/2.5 mm 2 A 3 20 A/2.5 mm 2 A 4 / A 3 3) (Q 2 20) 20 (Q 2 20) 20 (Q 2 20) 20 (Q 2 20) 20 (Q 2 20) 20 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG -/-/22...2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 5 30 V/0 A/26 2 AG 5 30 V/0 A/26 2 AG 300 V/0 A/26...2 AG Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. 783560000 00 783790000 00 95450000 50 783590000 00 cannot be combined with 783600000 00 DLI / DLA 78360000 00 (red LED) 783620000 00 (green LED) 783630000 00 (no dekafix) 783570000 0 (w. dekafix) 783580000 0 5 x 20 without indicator AP 783550000 20 AP 783550000 20 AP 783550000 20 AP 783550000 20 AP 783800000 20 AP 9503330000 50 AP (part-ap)78380000 AP emid 95470000 50 TSch 03960000 00 TSch 03960000 00 TSch 03960000 00 TSch 03960000 00 TSch 03960000 00 StB8.5 2) (ø2.3) 025700000 50 StB8.5 2) (ø2.3) 025700000 50 PS 2.3 080400000 20 PS 2.3 080400000 20 Q 2 500000 50 Q 2 500000 50 Q 2 500000 50 Q 2 500000 50 Q 2 500000 50 QB 2 04600000 50 Q 3 600000 50 Q 3 600000 50 Q 3 600000 50 Q 3 600000 50 Q 3 600000 50 QB 3 046200000 50 Q 4 700000 50 Q 4 700000 50 Q 4 700000 50 Q 4 700000 50 Q 4 700000 50 QB 4 046300000 50 Q 0 3300000 20 Q 0 3300000 20 Q 0 3300000 20 Q 0 3300000 20 Q 0 3300000 20 Q 20 399800000 20 Q 20 399800000 20 Q 20 399800000 20 Q 20 399800000 20 Q 20 399800000 20 QL 2 0297200000 00 QL 2 0297200000 00 QL 2 0297200000 00 QL 2 0297200000 00 QL 2 0297200000 00 VH 4.2 345800000 00 VH 4.2 345800000 00 VH 4.2 345800000 00 VH 4.2 345800000 00 VH 4.2 345800000 00 VQB.5/50BL 6380000 5 VQB.5/50 BL6380000 5 VQB.5/50 BL6380000 5 VQB.5/50 BL6380000 5 VQB.5/50 BL6380000 5 VQB.5/50RT 6390000 5 VQB.5/50 RT6390000 5 VQB.5/50 RT6390000 5 VQB.5/50 RT6390000 5 VQB.5/50 RT6390000 5 VQB.5/50S 63520000 5 VQB.5/50 S 63520000 5 VQB.5/50 S 63520000 5 VQB.5/50 S 63520000 5 VQB.5/50 S 63520000 5 T 4 34060000 00 T 4 34060000 00 T 4 34060000 00 T 4 34060000 00 T 4 34060000 00 SF 0 03400000 000 SF 0 03400000000 SF 0 03400000 000 SF 0 03400000000 SF 0 03400000000 SG 0 03500000 000 SG 0 03500000000 SG 0 03500000 000 SG 0 03500000000 SG 0 03500000000 ADP 0485400000 20 ADP 0485400000 20 ADP 0485400000 20 ADP 0485400000 20 ADP 0485400000 20 HP 4 0485860000 20 HP 4 0485860000 20 HP 4 0485860000 20 HP 4 0485860000 20 HP 4 0485860000 20 DEK 6 DEK 6 DEK 6 DEK 6 DEK 6 DEK 8 ) If the cross-connection runs via the PE connection of the DLA or if a pole is generally skipped, nomnial voltage is reduced to 30 V~ 2) StB 8.5 only in upper busbar 3) Upper busbar 45
Feed-through terminals for initiators and actuators VLI.5 VLI.5PE MAK 2.5 Dimensions/approvals a q # a q # a r # idth/length/height (mm) with TS 35 x 7.5 6/79/64 6/69/63 6/88/64 8 mm/m 2.5/3.5 x 0.6 8 mm/m 2.5/3.5 x 0.6 8 mm/m 2.5/3.5 x 0.6 Rated data IEC 60 947-7- 250 V/7.5 A/.5 mm 2 250 V/7.5 A/.5 mm 2 500 V (L-L)/250 V (L-PE)/ 24 A/2.5 mm 2 Rated impulse voltage/pollution severity 4 kv/3 4 kv/3 4).0.0.0.5 4 Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Gauge pin acc. to IEC 60 947-7- Continuous current of terminal for conductor size Size A3 24 A/2.5 mm 2 A3 24 A/2.5 mm 2 A3 3 A/4 mm 2 Cont. current of cross-connect., multi-pole A 24 24 24 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG 300 V/0 A/26 2 AG 300 V/0 A/22 2 AG Cat. No. Qty. Cat. No. Qty. Cat. No. Qty. emid 78420000 50 78430000 50 797030000 50 797020000 50 End plate/partition End plate AP VLI.5 78450000 20 APVLI.5/PE 78460000 20 AP MAK2.5 797000000 20 Partial end plate for VLI.5 MAK2.5 combination TEAP 2 MAK2.5 782950000 20 TEAP2 MAK2.5 782950000 20 Partial end plate for VLI.5 VLI.5PE combination TEAP VLI.5 78470000 20 TEAP VLI.5 78470000 20 Partial end plate for VLI.5PE MAK2.5 combination TEAPMAK2.5 782940000 20 TEAP MAK2.5 782940000 20 Cross-connection VQB 50-pole, snap-fit, external cross-connection VQB.5/50BL ) 6380000 5 VQB.5/50BL ) 6380000 5 VQB.5/50BL ) 6380000 5 VQB.5/50RT ) 6390000 5 VQB.5/50RT ) 6390000 5 VQB.5/50RT ) 6390000 5 VQB.5/50S ) 63520000 5 VQB.5/50S ) 63520000 5 VQB.5/50S ) 63520000 5 QB 25 S ) 0520000000 20 QB 25-pole external cross-connection QB 25 RT ) 0520060000 20 QB 25 BL ) 0520080000 20 Group marking T 5 0348500000 00 T 5 0348500000 00 T 5 0348500000 00 Tag carrier SF 0 03400000 000 SF 0 03400000 000 SF 0 03400000 000 for S 0 markers SG 0 03500000 000 SG 0 03500000 000 SG 0 03500000 000 F/FS/... Mounting rails, end brackets, further marking materials ) hen using cross-connection bridges, the connection cross-section is reduced by one level. 46
Feed-through terminals MA 4/4 MA 4/5 ZQV DK 2.5 D DK 2.5 D GET.SCH. Terminals for incorporating electronic components DU 240 -series Max. technical data Dimensions / approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Flexible H07V-K and ferrule acc. to DIN 46 228/ mm 2 Max. clamping range in mm 2 /Gauge pin acc. to IEC 60 947-7- Size Cont. current of cross-connect. QV/ZQV 2 5-pole A Cont. current of cross-connect. QV/ZQV 6 0-pole A Motor connection block (L, L2, L3, PE) emid Motor connection block (L, L2, L3, N, PE) emid Dark beige emid Blue emid End plate/partition Dark beige emid Blue emid Dark beige emid AP (thickness.5 mm) T Blue emid Frame (5 mm) Cross-connection 2-pole QV ZQV LGB 240/3 3-pole 4-pole 5 9-pole 0-pole QB 2/24 QB 240/3 4-pole Cross-connection comb LS 2.8 Screening bar Notching tool Test adapter / strain relief / compensating terminals TA Strain relief Compensating terminal Test plug/socket/hexagon wrench PS 2.3 Test plug (ø2.3 mm) StB 8.5 Test socket screw 8.5 (ø2.3 mm) SK wrench Covers Group marking ith symbol hite AD for self-labelling/white 4 A/6 mm 2 24.5(30.6)/60/47 0 mm/m 3/3.5 x 0.6 800 V/ A/4 mm 2 0.5.0 2.5 6 0.3 6 A 4 4/ 4/ Cat. No. Qty. MA 4/4 034000000 20 MA 4/5 033800000 20 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 T 2.5-0 05000000 20 T2.5-0 05080000 20 ZQV4N Qty. QV Qty. 758250000 60 05960000 50 762630000 60 054560000 50 762620000 60 054660000 50 ZQV see p. 263 / QV see p. 262 758260000 20 052060000 20 758270000 0 (4-pole) LS 2.8 3) 056400000 50 A 9004500000 TA 3 6350000 50 TA 3/ZA 6360000 50 TA 3/0 6370000 5 Strain relief ZE 650000 50 PS 2.3(ø2.3)080400000 20 StB8.5(ø2.3)0280600000 50 AD 5 053460000 50 AD 5white056060000 50 GB 5 050760000 50 T 5 0348500000 00 SF 0 03400000 000 GB T5 Tag carrier for S 0 markers SG 0 03500000 000 DEK Standard DEK 6 S white neutral S 2/6609900000600 DEK S S indiv. printed S 2/66099000020 Mounting rails, end brackets, further marking materials ) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 33300000 2) Scews with hexagonal socket -/2.5 mm 2 a 5/69/63 0 mm/m 2.5/3.5 x 0.6 -/-/2.5 mm 2.5 4 ) 0.3 4 A 3 300 V/20 A/22 2 AG Cat. No. Qty. 0200000 00 ith divided busbar (bottom) 02300000 00 AP 05900000 20 AP 05980000 20 T 058800000 20 DK 2.5 074000000 20 QV 2.5/2 053660000 50 QV 2.5/3 053760000 50 QV 2.5/4 053860000 50 see p. 262 QV2.5/0 054460000 20 QB A/24 579000000 20 LS 2.8 3) 056400000 50 A 9004500000 TA 0535860000 20 PS2.3(ø2.3) 080400000 20 StB8.5(ø2.3) 025700000 50 ADP 3 0485400000 20xm HP 3 0485760000 20 AD 4 072000000 50 T 4 34060000 00 SF 0 03400000 000 SG 0 03500000 000 S 8/5 640740000 720 S 8/5 773360000 300 45 A/2.5 mm 2 art 36/00/3.5 40 mm/m 0 2) / 000 V/45 A/240 mm 2 8 kv / 3 25 30 70 240 70 240 70 240 70 85 70 85 B 5 / A 5 382 382 600 V/380 A/500 MCM 600 V/400 A//0 AG-500 MCM Cat. No. Qty. 802780000 2 QB 240/2 802780000 20 QB 240/3 802800000 20 Comp. terminal ZAD 240 80280000 4) SK 0235000000 3) hen using the screening bar, rated voltage is reduced to 400 V! 4)I max = 57 A 47
Coloured terminals DU 2.5 DU 4 TR 2.5 ZQV ZQV Max. technical data Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 VDE rated data 06 Part /8.92/IEC 60 947-7- Rated impulse voltage/pollution severity Dark beige emid Blue emid Yellow emid Green emid Brown emid Grey emid o hite emid Orange PA Red emid Violet PA Black emid End plate/partition Dark beige emid Blue emid Yellow emid Green emid Brown emid AP Grey emid o hite emid Orange PA Red emid Violet PA Black emid Dark beige emid T (thickness.5 mm) Blue emid Cross-connection QV ZQV QB 8/24 Screening bar LS 2.8 2-pol. 3-pol. 4-pol. 0-pol. Notching tools A for QV and A 2 for notching the punch-out in the terminal support Test adapter TA TA Test plug/socket PS 2.3 StB 8.5 Strain relief A/4 mm 2 5/60/47 0 mm/m 2.5/3.5 x 0.6 800 V/24 A/2.5 mm 2 see DU 2.5 page 4 600 V/25 A/22 2 AG 600 V/20 A/26 2 AG Cat. No. Qty. 020000000 00 020080000 00 020020000 00 020090000 00 03770000 00 037720000 00 036800000 00 020060000 00 020040000 00 037700000 00 02000000 00 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 AP 2.5-0 050020000 50 AP 2.5-0 072200000 50 AP 2.5-0 050070000 50 AP 2.5-0 050050000 50 AP 2.5-0 050090000 50 AP 2.5-0 050060000 50 AP 2.5-0 050040000 50 AP 2.5-0 07220000 50 AP 2.5-0 05000000 50 T 2.5-0 05000000 20 T 2.5-0 05080000 20 QV 2.5N Qty. ZQV 2.5 Qty. 053660000 50 69380000060 053760000 50 69380000 60 053860000 50 693820000 60 053860000 20 693880000 60 QB B/24 579060000 20 LS 2.8 056400000 50 A 9004500000 TA 2 60000 50 TA 2/ZA 6330000 50 TA 2/0 6340000 5 ZE 650000 50 PS 2.3(ø 2.3) 080400000 20 46 A/6 mm 2 6/60/47 0 mm/m 3 /3.5 x 0.6 800 V/ A /4 mm 2 see DU 4 page 4 600 V/35 A/22 0 AG 600 V/35 A/26 0 AG Cat. No. Qty. 02000000 00 02080000 00 02020000 00 02060000 00 03780000 00 037800000 00 036700000 00 036760000 00 02040000 00 037820000 00 0200000 00 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 AP 2.5-0 050020000 50 AP 2.5-0 072200000 50 AP 2.5-0 050070000 50 AP 2.5-0 050050000 50 AP 2.5-0 050090000 50 AP 2.5-0 050060000 50 AP 2.5-0 050040000 50 AP 2.5-0 07220000 50 AP 2.5-0 05000000 50 T 2.5-0 05000000 20 T 2.5-0 05080000 20 QV 2.5N Qty. ZQV 2.5 Qty. 05960000 60 75825000 50 054560000 60 762630000 50 054660000 60 76262000050 052060000 20 758260000 20 QV 2.5/4 758270000 0 LS 2.8 056400000 50 A 9004500000 TA 3 6350000 50 TA 3/ZA 6360000 50 TA 3/0 6370000 5 ZE 650000 50 PS 2.3 (ø 2.3) 080400000 20 6 A/.5 mm 2 5/60/49 0 mm/m 2.5/3 3) /3.5 x 0.6 800 V/6 A 4) /.5 mm 2 see TR 2.5 page 24 300 V/0 A/22 2 AG 300 V/0 A/26 2 AG ithout StB ith 2 StB Qty. 000000 0200000 00 080000 0280000 00 020000 0220000 00 030000 0230000 00 050000 0250000 00 090000 0290000 00 060000 0260000 00 040000 0240000 00 09500000 00 00000 020000 00 AP 2.5-0 050000000 50 AP 2.5-0 050080000 50 AP 2.5-0 050020000 50 AP 2.5-0 072200000 50 AP 2.5-0 050070000 50 AP 2.5-0 050050000 50 AP 2.5-0 050090000 50 AP 2.5-0 050060000 50 AP 2.5-0 050040000 50 AP 2.5-0 07220000 50 AP 2.5-0 05000000 50 T 2.5-0 05000000 20 T 2.5-0 05080000 20 QL 2 025800000 00 QL 3 025900000 00 QL 4 026000000 50 QL 0 0338000000 20 BS-M 2.5 x 4.5 062700000 00 A 2 900450000 PS 2.3 (ø 2.3) 080400000 20 StB 8.5(ø 2.3) 025700000 50 Screwdriver SDIK for StB Cat. No.: 9024930000 Cover AD with symbol AD white, for self-labelling Group marking AD 5 AD 5 white GB 5 053460000 056060000 050760000 50 50 50 GB T 5 0348500000 00 SF 0 03400000 000 SD 2.5 T5 Tag carrier for S 0 markers SG 0 03500000 000 DEK Standard S white neutral S 2/5 609860000 720 DEK S S indiv. printed Mounting rails, end brackets, further marking materials ) ith wire link 2) /o special components 3) ith StB 2.3 5) Maximum power loss.6 StB 8.5(ø 2.3) 0280600000 50 AD 5 053460000 50 AD5 white 056060000 50 GB 5 050760000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 DEK 6 S 2/6 609900000 600 4) hen using the diode plug with soldered diode, rated current is reduced to A hen using the screening bar, rated data is reduced! Diode support SD2.5 ( 058460000 25 SD2.5 ) 058560000 25 SD 2.5 ) 058660000 25 SD 2.5 2 ) 058760000 25 S 2/5 609860000 720 48
-series terminals with clamping yoke and tension clamp 27.2 6.75 X DU 4 SL DU 6 SL DU 0 SL ZQV -series Note: The insulation stripping length of the connection conductor is pre-defined. e advise to use hook-shaped cable lugs which are recommended by the relevant cable lug manufacturers. In this case, rated voltage is 250 V. If an end plate is inserted, rated voltage is 400 V. Dimensions/approvals idth/length/height (mm) with TS 35 x 7.5 a r 6/60/47 idth/length/height (mm) + Y 6/60/52 Rated data Rated impulse voltage/pollution severity 5 mm/m 3/3.5 x 0.6 IEC 500 V/ A/4mm 2 0.5 2 0.5...6.5...6 0.5...4 Max. clamping range in mm 2 /Gauge pin acc. to IEC 60 947-7- Size Hook-shaped cable lugs acc. to ESI 50-8 Part 2 0.3...6 A4 Size 2 (x = 3 mm) 2 pieces 0.28...5 Size (x = 4.6 mm) 2 pieces Dark beige emid + Y Dark beige emid PA 66 black + Y PA 66 black IEC 9537440000 9537450000 9537500000 953750000 Qty. 50 50 50 50 600 V/30 A/22...0 300 V/25 A/22...0 Hook-shaped cable lugs 0.25.5 mm 2 black.25 2.5 mm 2 black 9036290000 00 End plate/partition AP T emid Type AP 2.5-0 Cat. No. 050000000 Qty. 50 Thickness emid T 2.5-0 05000000 20.5 mm Black emid AP 05000000 50 Thickness.5 mm Black emid T 0500000 20 Cross-connection QV 4/2 05960000 50 QV ZQV Test adapter TA 5 TA 3 Test plug/socket PS 2.3 StB 8.5 QV 4/3 054560000 50 QV 4/4 054660000 50 QV 4/0 052060000 20 A 9004500000 ZQV 4N/2 758250000 60 ZQV 4N/3 762630000 60 ZQV 4N/4 762620000 60 ZQV 4N/0 758260000 20 ZQV 4N/4 758270000 0 TA 3 6350000 50 TA 3/ZA 6360000 50 TA 3/0 6370000 5 ZE 650000 25 PS 2.3 (ø 2.3) 080400000 20 StB 8.5 (ø 2.3) 0280600000 50 Cover AD with symbol AD white Group marking GB T 5 AD 5 AD 5 white GB 5 T 5 053460000 056060000 050760000 0348500000 50 50 50 00 Tag carrier for S 0 markers SF 0 SG 0 03400000 000 03500000 000 DEK Standard DEK 6 S white neutral S 2/6 609900000 600 DEK S S indiv. printed S 2/6 60990000 20 Mounting rails, end brackets, further marking materials a r 8/60/47 8/60/52 6 mm/m 3.5/4 x 0.8 IEC ESI 500 V/24 A 500 V/4 A/6mm 2 0.8.4 3 0.5...0.5...0 0.5...6 0.5...0 A4 0.28...5/...2.5 0.28...5/...2.5 ESI IEC Qty. 9537460000 50 9537470000 50 9537420000 50 9537430000 50 50 V/45 A/20...8 300 V/45 A/20...8 9036290000 00 9036300000 00 AP 2.5-0 050000000 50 T 2.5-0 05000000 20 AP 05000000 50 T 0500000 2 QV 6/2 052360000 50 QV 6/3 054760000 50 QV 6/4 054860000 50 QV 6/0 052260000 20 A 9004500000 TA 5/ 05260000 25 PS 2.3 (ø 2.3) 080400000 20 PS 4 (ø 4) 0299600000 20 StB 8.5 (ø 2.3) 0280600000 50 StB 4 (ø 4) 069900000 50 AD 8 053560000 50 AD 8 white 05660000 50 GB 8 050960000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 DEK 8 S 2/6.5 609920000 540 S 2/6.5 609930000 08 a r 0/60/47 0/60/52 7 mm/m 4/5.5 x.0 IEC ESI 500 V/36 A 500 V/57 A/0mm 2.2 2.4 4.5...6.5...6.5...0.3...0 A5 0.28...5/...2.5 0.28...5/...2.5 ESI IEC Qty. 9537480000 50 9537490000 50 9537400000 50 953740000 50 50 V/50 A/6...8 300 V/65 A/6...6 9036290000 00 9036300000 00 AP 2.5-0 050000000 50 T 2.5-0 05000000 20 AP 05000000 50 T 0500000 20 QV 0/2 052560000 50 QV 0/3 054960000 50 QV 0/4 055060000 50 QV 0/0 052460000 20 A 9004500000 TA 5/ 05260000 25 PS 2.3 (ø 2.3) 080400000 20 PS 4 (ø 4) 0299600000 20 StB 8.5 (ø 2.3) 0280600000 50 StB 4 (ø 4) 069900000 50 AD 8 053560000 50 AD 8 white 05660000 50 GB 8 050960000 50 T 5 0348500000 00 SF 0 03400000 000 SG 0 03500000 000 S 2/6.5 609920000 540 S 2/6.5 609930000 08 49
-series terminals with clamping yoke + spring TL 6 SL TD 6 SL Dimensions/approvals idth/length/height (mm) with TS 35 idth/length/height (mm) + Y Rated data Rated impulse voltage/pollution severity Max. clamping range in mm 2 Gauge pin acc. to IEC 60 947- Hook-shaped cable lugs acc. to ESI 50-8 Part 2 Size 2 (x = 3 mm) 2 pieces Size (x = 4.6 mm) 2 pieces Dark beige emid + Y Dark beige emid Black PA 66 + Y Black PA 66 Hook-shaped cable lugs End plate/partition 0.25.5 mm 2 black.25 2.5 mm 2 black Dark beige emid Black PA 66 8/83/50 8/83/49 6 mm/m 3.5/4.0 x 0.8 ESI 500 V/24 A/6mm 2 0.8.4 3 0.5...0.5...0 0.5...6 0.5...0 A4 0.28...5/...2.5 0.28...5/...2.5 TL 6 SL 9538070000 50 TL 6 SL 9538080000 50 TL 6 SL 9538020000 50 TL 6 SL 9538030000 50 9036290000 9036300000 AP 95380000 20 AP 9538060000 20 8/83/50 8/83/49 6 mm/m 3.5/4.0 x 0.8 ESI 500 V/24 A/6mm 2 0.8.4 3 0.5...0.5...0 0.5...6 0.5...0 A4 0.28...5/...2.5 0.28...5/...2.5 TD 6 SL 9538090000 50 TD 6 SL 953800000 50 TD 6 SL 9538040000 50 TD 6 SL 9538050000 50 9036290000 9036300000 AP 95380000 20 AP 9538060000 20 Cross-connection 2-pole QL2 094300000 50 QL 2 094300000 50 3-pole QL3 094400000 50 QL 3 094400000 50 QL 4-pole QL4 094500000 50 QL 4 094500000 50 0-pole QL0 0338300000 20 QL 0 0338300000 20 VH BS QVS 0292500000 00 QVS 0292500000 00 VH 9 038000000 00 VH 9 038000000 00 QVSK QVS 2 0307300000 20 QVS 2 0307300000 20 QVSK 2 670360000 20 QVSK 2 670360000 20 QVS 3 09300000 20 QVS 3 09300000 20 QVS 4 0307400000 20 QVS 4 0307400000 20 Test plug PS 4 0299600000 20 PS 4 0299600000 20 Test socket screw StB 25 GE StB 25 GE 0267200000 50 StB 25 GN StB 25 GN 027200000 50 StB 25 VI StB 25 VI 027300000 50 StB 35 GE StB 35 GE 0389000000 50 StB 35 GN StB 35 GN 0388900000 50 StB 35 VI StB 35 VI 038900000 50 StB 4 StB 4 069900000 50 Disconnect lock SSP 3 053760000 00 DEK Standard S white neutral DEK S S indiv. printed DEK 8 S 2/6.5 609920000 540 S 2/6.5 609930000 08 DEK 8 S 2/6.5 609920000 540 S 2/6.5 609930000 08 Mounting rails, end brackets, further marking materials 50
-series terminals with clamping yoke + spring TR 4 SL ZQV TR 4 SI SL ZQV -series Dimensions/approvals idth/length/height (mm) with TS 35 idth/length/height (mm) + Y a r 6/60/47 2.5/M3/3.5 x 0.6 a r 6/60/52 2.5/M3/3.5 x 0.6 Rated data Rated impulse voltage/pollution severity 500 V/24 A/4mm 2 400 V/6.3 3) A/4mm 2 Max. clamping range in mm 2 Gauge pin acc. to IEC 60 947- Hook-shaped cable lugs acc. to ESI 50-8 Part 2 Size 2 (x = 3 mm) 2 pieces Size (x = 4.6 mm) 2 pieces Dark beige emid Blue emid Black PA 66 + Y Dark beige emid + Y Blue emid + Y Black PA 66 Hook-shaped cable lugs 0.25.5 mm 2 black 0.5 2 0.5...6.5...4 0.5...4 0.3...6 A4 0.28...5/...2.5 300 V/22 A/22 0 AG 300 V 4) /24 A/22 0 AG ith StB2.3 ithout StB Qty. TR 4 SL 790300000 790270000 50 TR 4 SL 79030000 790280000 50 TR 4 SL 7900000 790290000 50 TR 4 SL 790390000 790360000 50 TR 4 SL 790400000 790370000 50 TR 4 SL 79040000 790380000 50 9036290000 0.5 2 0.5...6.5...4 0.5...4 0.3...6 A4 0.28...5/...2.5 300 V/6.3 A/22 2 AG 300 V/6.3 A/22 0 AG ithout StB Qty. TR 4 SI SL 790330000 50 TR 4 SI SL 790350000 50 TR 4 SI SL 790420000 50 TR 4 SI SL 790440000 50 9036290000 End plate/partition Dark beige emid Black PA 66 Blue emid AP T Dark beige emid Cross-connection ZQV 2-pole 3-pole 4-pole 0-pole 4-pole neutral Test plug PS 2.3 Test adapter TA 6 AP 050000000 50 AP 05000000 50 AP 050080000 50 T 05000000 20 ZQV 4N/2 758250000 60 ZQV 4N/3 762630000 60 ZQV 4N/4 762620000 60 ZQV 4N/0 758260000 20 ZQV 4N/4 758270000 0 QB 75/6.2/5 0535200000 0 ISPF QB75 S 0526700000 0 ISPF QB75 BL 0526780000 0 ISPF QB75 RT 0526760000 0 080400000 20 6380000 25 AP 050000000 50 AP 05000000 50 AP 050080000 50 T 05000000 20 ZQV 4N/2 758250000 60 ZQV 4N/3 762630000 60 ZQV 4N/4 762620000 60 ZQV 4N/0 758260000 20 ZQV 4N/4 758270000 0 QB 75/6.2/5 0535200000 0 ISPF QB75 S 0526700000 0 ISPF QB75 BL 0526780000 0 ISPF QB75 RT 0526760000 0 080400000 20 6380000 25 Fuse holder for 5x20 SIHA SIHA 2/G 20 400 V~ SIHA 2/G 20 2 V-/24 V~ SIHA 2/G 20 20-30 V-/40-60 V~ SIHA 2/G 20 40-60 V-/80-220 V~ SIHA 2/G 20 5 V-/230 V~ 9537600000 25 953760000 25 9537620000 25 9537630000 25 9537640000 25 DEK Standard S white neutral DEK S S indiv. printed DEK 6 S 2/6 609900000 600 S 2/6 60990000 20 DEK 6 S 2/6 609900000 600 S 2/6 60990000 20 Mounting rails, end brackets, further marking materials 3) Maximum power loss.6 4) ith AP or T 600V/22 A 5