or Star Attachments turn one piece of equipment into a whole fleet. YOUR NEW 2011 Catalog

FORT WORTH, TX YOUR NEW 2011 Catalog Star Attachments turn one piece of equipment into a whole fleet. Forklift Attachments Loader Attachments & Buckets Crane Attachments Masonry Equipment Manufacturing quality products since 1981.

CONTENTS Star Industries 2011 Catalog Safety Work Platforms.................................... Industrial Work Platforms................................. Spreader Bars.......................................... Forklift Root Grapples & Grapple Buckets..................... Forklift Buckets......................................... Self Dump Buckets...................................... Heavy Duty Jib......................................... Quick-Tach Truss Boom................................... Concrete Hoppers........................................ Self Dump Hoppers...................................... Trash Hoppers........................................... Lift Hooks............................................... Lift-N-Tows............................................. Load-N-Tows............................................ Safety Loading Platform................................... Replacement Forks & Bars................................ Fork Extensions........................................ FORKLIFT ATTACHMENTS Skid-Steer Augers....................................... Skid-Steer Root Grapples & Grapple Buckets.................. 4 in 1 Buckets.......................................... Skeleton Buckets....................................... Heavy Duty Buckets..................................... Trash Hoppers......................................... Forkframes............................................ Concrete Placement Buckets.............................. Mix-N-Place Drum Mixer................................. Scoop-N-Mix Concrete Mixer.............................. Telescoping Crane Jib................................... Trailer Spotter.......................................... Angle Brooms........................................... Mad Beaver Brush Cutters.................................. Over-the-Bucket Forks.................................... LOADER ATTACHMENTS & BKTS. 2 4 5 6 8 10 12 14 16 18 20 21 22 24 25 26 27 28 30 32 34 35 36 37 38 39 40 42 43 44 45 46 FORKLIFT ATTACHMENTS LOADER ATTACHMENTS & BKTS. Spreader Bars.................... see Forklift section page 5 Crane Forks............................................. Crane Lift Box............................................ Crane Trash Skip......................................... Load-N-Haul............................................. 47 48 49 50 H & H HOIST & HAUL (includes Crane Attachments) Brick Block Carts / Masonry Stands / Scaffold.................. Mortar Tubs & Buggies / Concrete Rakes...................... MASONRY EQUIPMENT 51 52 MAS.

SAFETY WORK PLATFORMS Star Attachments Turn a Forklift into a Whole Fleet of Equipment SAFETY WORK PLA LATFORMS TURN YOUR FORKLIFT INTO AN AERIAL WORK PLA LATFORM Meets / Exceeds OSHA & ANSI Requirements GOES WHERE SCISSOR-LIFTS CAN T FASTER THAN SCAFFOLD PROVIDES A WIDER PLATFORM THAN BOOM LIFTS REACHES OVER OBSTRUCTIONS SIMPLE AND INEXPENSIVE - Expanded Metal Deck - Spring Loaded Gate Latch - Larger 1½" sq. tube Guard Rails NEW IMPROVED DESIGN - Larger 1" dia. Fork Retaining Pins w/ pin storage - End Fork Loops for easier handling of platform - Integral 5½" high Toe Boards Quick-Tach & Slip-on-Forks Models Available Goes Where Scissor-Lifts Can t Faster Than Scaffold

Quality Made in the USA Safety Work Platforms for forklifts CHOOSE FROM 2 STYLES Both are Quick & Easy to Install Access Gate at each end Tie-Offs for Personnel Lanyards Slip-On-Forks...or Forklift must be equipped with a quick-tach. Quick-Tach Expanded MetalDeck Specifications 5½" Steel Toeboards End Fork Loops (for handling only) Forklift Attachments Full Perimeter Guard Rail System constructed of 1½" square steel tubing & consisting of a 42" high top rail, a mid rail, and 5½" high intregel toeboards. Access gates with spring pin latches are provided at each end. Entire Guard Rail System can be easily removed and laid flat inside platform for transportation. Deck consists of a strong but lightweight engineered steel frame with expanded metal deck. The Universal Fit Slip-On-the-Forks design can be used with both Extendible Reach and Straight Mast forklifts. Forks slide into steel fork pockets and are secured with two heavy duty steel pins behind the heel of the forks. They are designed for use with a 48" or wider carriage and 48" long forks up to 7" wide and 2¾" thick. Forks longer than 48" can be used, however, they will extend out past the front of the platform. All Models are rated at 1,000 lbs. load capacity. Rating applies to platform only and does not reflect capacity of forklift. Optional Mast Protection Screen (Model 1250) protects personnel from moving parts of forklift mast. Constructed of square steel tubing and expanded metal, the screen measures 42" wide x 84" tall. It attaches to the back guardrail with u-bolts. A mast protection screen should be used with all straight mast forklifts and with any others where a mast poses a safety hazard. The Quick-Tach models are built to fit specific makes & models of forklifts that are equipped with a quick-tach. The forks and carriage are removed and the Platform attaches to the boom. UNIVERSAL F IT "Slip-on-Forks" MODELS Model Size Weight 1204B 4' x 4' 310 lbs. 1206B 4' x 6' 380 lbs. 1208B 4' x 8' 425 lbs. 1210B 4' x 9' 8" 485 lbs. "QUICK-TACH" MODELS Model Size Weight 1204BQT 4' x 4' ± 460 lbs. 1206BQT 4' x 6' ± 530 lbs. 1208BQT 4' x 8' ± 575 lbs. 1210BQT 4' x 9' 8" ± 635 lbs. Specify forklift make & model when ordering QT platforms. Fork Pocket Size: 48" long x 7¾" x 3" ID / Center to Center of Fork Pockets: 38 / 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 SPECIAL SAFETY NOTE: I.T.S.D.F. Standard B56.6 for Rough Terrain Forklift Trucks states that... the platform floor dimension shall not exceed the overall width of the truck (measured across the load bearing tires) plus 10" on either side. Star Industries recommends that all users of Star Safety Work Platforms conform to this requirement as well as the other requirements of B56.6. Furthermore, users should conform to all applicable local, state, and federal safety standards. Star Industries recommends you contact the respective forklift manufacturer for any additional safety requirements or limitations. Pocket Ends are open. Operating Manual/Safety Information Available online - 3

Industrial Safety Work Platforms for FORKLIFTS Every warehouse and manufacturing plant has need to elevate personnel... Make it safe with a Star Industrial Work Platform Reduce your Labor Cost: The job is done quicker because personnel work comfortably in the safety of a full guard rail system. Both hands are free to accomplish the task at hand. Faster and safer than ladders. No lost time erecting scaffolding. Model 1203B 3' x 3' Elevate your Personnel for: Inventory Equipment repair Lighting maintenance Building repairs and maintenance and many more every day jobs Meets / Exceeds OSHA & ANSI Requirements Reduce Capital Expenditures: No need to invest thousands of dollars in other equipment. Your forklift and an inexpensive Star Platform can do the job right. Do It Safely: Stop personnel from standing on a pallet or make-shift platform. Star Platforms are safe; they meet or exceed all OSHA / ANSI requirements. MODEL 1244B 4' X 4' EVERY PLANT CAN AFFORD ONE Look at these features... Heavy Duty Construction - 1,000 lbs. capacity Secures to forks with simple Positive Pin Locking System Front mid rail raises for entrance - no gate to be left open Built-in 84" high Mast Protection Screen (upper half removable for transportation & storage) Integral full perimeter toeboard Accepts forks up to 2 3 /8" thick x 6" wide Available Models... Model 1203B 3' x 3' Platform 205 lbs. Model 1244B 4' x 4' Platform 320 lbs. Fork Pocket Size: 36"(Model 1203B) 48"(Model 1244B) long x 6¾" x 2½" ID / Center to Center of Fork Pockets: 24" / Pocket Ends are open.

Heavy Duty Spreader Bars Model 1150 Actual appearance will vary with model and length Any long material that has a tendency to bend can be handled easily and more safely with a spreader bar. A safe and convenient attachment for handling rebar cages. Model 1160 (Model 1195 is similar) Forklift Attachments A popular attachment with metal building erectors. They use it to handle long metal building beams as well as sheet metal roofing and siding. Universal Fit - slip-on-the-forks Designed for use with rough terrain forklifts, either straight mast or extendable reach. It comes equipped with fork pockets that will accept up to 7" wide x 2 ½" thick forks. A center hole provides a hook point that also allows the spreader bar to be suspended from a crane. Center Hook optional Safety Chain attaches here but not shown. Retaining Pin installs here but not shown. End View Model 1160/1195 MODEL WEIGHT EXTENDS 1150 350 lbs. 8 ft. to 12 ft. MAXIMUM TOTAL LOAD CAPACITIES 8 ft. SPREAD 8,000 lbs. 10 ft. SPREAD 6,400 lbs. 12 ft. SPREAD 5,000 lbs. OPTIONAL CENTER HOOK MAX LOAD CAPACITY (using Center Hook ONLY) Add suffix CH to model 6,000 lbs. 1160 1,025 lbs. 12 ft. to 20 ft. 12 ft. SPREAD 16,000 lbs. 16 ft. SPREAD 11,000 lbs. 20 ft. SPREAD 8,000 lbs. 8,000 lbs. 1195 2,280 lbs. 20 ft. to 30 ft. 20 ft. SPREAD 20,000 lbs. 25 ft. SPREAD 18,000 lbs. 30 ft. SPREAD 15,000 lbs. 10,000 lbs. Model 1150 Fork Pocket Size: 5" long x 7¾" x 2 15 /16" ID / Center to Center of Fork Pockets: 39" / Pocket Ends are open. Model 1160 / 1195 Fork Pocket Size: 24" long x 7¾" x 3 1 /2" ID / Center to Center of Fork Pockets: 40" / Pocket Ends are open. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 5

Grapple Buckets & Roo oot t Grapples for Extendable Reach Forklifts Grapple Buckets DEMOLITION AND MEGA GRADES Model 175MG-72 GRAPPLE BUCKET & ROOT GRAPPLE BENEFITS AND FEATURES: MOVE BULKY HARD-TO-HANDLE MATERIALS EASILY AND SECURELY. IDEAL FOR LOADING OR PILING LOGS AND BRUSH. BEST CHOICE FOR CLEAN-UP OF DEMOLITION AND STORM DEBRIS. RUGGED HEAVY DUTY CONSTRUCTION FOR DEPENDABILITY AND LONG LIFE. HYDRAULIC CYLINDERS OPERATE INDEPENDENTLY TO ADJUST FOR UNEVEN LOADS. HYDRAULIC CYLINDERS, HOSES AND FITTINGS ARE PROTECTED WITH COVERS. GREASE ZERKS AT ALL PIVOT POINTS. THE PERFECT CHOICE FOR STORM CLEAN-UP DEMOLITION CONSTRUCTION LANDSCAPING LAND CLEARING Models available to fit most telehandler quick-taches. Model 175DG-72 Bucket bottom is protected and reinforced by ½" thick steel ribs. Model 175DG-72 Optional End Plates help contain loose materials. CUTTING EDGES ARE PUNCHED FOR OPTIONAL BOLT-ON-BLADE. Specifications: Demolition Grade Mega Grade Mega Grade 72" Grapple Bucket 72" Grapple Bucket 95" Grapple Bucket Model 175DG-72 * Model 175MG-72 * Model 175MG-95 * Width I.D. 72" 72" 95" Grapple Opening 45" 58.8" 58.8" Grapple Capacity 0.9 cuyd 1.33 cuyd 1.75 cuyd Bucket Capacity (w ith end plates) 0.6 cuyd 1.0 cuyd 1.4 cuyd Depth 39" 45½" 45½" Bucket Back Height 19" 31" 31" Back Structure (2) 4" x 4" x ¼" Tubes (3) 4" x 4" x ¼" Tubes (3) 4" x 4" x ¼" Tubes Bucket Back 3/16" Plate ¼" Plate ¼" Plate Bucket Bottom ¼" Plate ¼" Plate ¼" Plate Bucket Sides ½" ½" ½" Bottom Wear Protection ½" Ribs ½" Ribs ½" Ribs Grapple Thickness 9/16" 9/16" 9/16" Cutting Edge 1" x 8" 1" x 8" 1" x 8" HD Welded Hyd Cylinders 2" x 10" x 1¼" rod 2" x 10" x 1¼" rod 2" x 10" x 1¼" rod Hyd Hoses & Flat Faced Couplers Included Included Included Empty Weight ± 1,135 lbs. ± 1,500 lbs. ± 1,790 lbs. * Specify make and model of forklift for compatible quick-tach.

Roo oot Grapples DEMOLITION AND MEGA GRADES Model 170MG-72 Grapples open wide for full load. Model 170DG-72 ROOT GRAPPLES LET THE DIRT SIFT OUT WHEN LOADING LARGE ROCKS AND TRASH. BOTTOM TINES CURVE UPWARD - PREVENTS CATCHING UTILITY LINES OR CABLES IN STORM CLEAN-UP. SERRATED PLATES BETWEEN GRAPPLE TINES PROVIDE GRIP FOR PULLING LOGS OUT OF A PILE. OPTIONAL INTERMEDIATE BOTTOM TINES - REDUCES SPACE BETWEEN TINES. Forklift Attachments Model 170MG-72 Quick-Tach is designed to fit your specific make and model of telehandler. Cylinder Hoses routed in enclosed tube. Hydraulic fittings protected by steel cover. Grease Fittings are protected from damage by raised rings. Demolition Grade 72" Root Grapple Mega Grade 72" Root Grapple Mega Grade 95" Root Grapple Specifications: Model 170DG-72 * Model 170MG-72 * Model 170MG-95 * Width I.D. 72" 72" 95" Grapple Opening 42¾" 57" 57" Grapple Capacity ¾ cuyd 1½ cuyd 2 cuyd Depth 42" 48" 48" Back Height 19" 36" 36" Back Structure (2) 4" x 4" x ¼" Tubes (3) 4" x 4" x ¼" Tubes (3) 4" x 4" x ¼" Tubes Bottom Structure (1) 3" x ¼" Round Tube (2) 3" x ¼" Round Tubes (2) 3" x ¼" Round Tubes Bottom Tine Height 5" 5" 5" Bottom Tine Thickness ½" ½" ½" Grapple Tine Thickness 9/16" 9/16" 9/16" Distance betw een Tines approx. 8½" approx. 8½" approx. 8½" HD Welded Hyd Cylinders 2" x 10" x 1¼" Rod 2" x 10" x 1¼" Rod 2" x 10" x 1¼" Rod Hyd Hoses & Flat Faced Couplers Included Included Included Empty Weight ± 1,050 lbs. ± 1,350 lbs. ± 1,650 lbs. * Specify make and model of forklift for compatible quick-tach. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 7

FORKLIFT BUCKETS Star Attachments Turn a Forklift into a Whole Fleet of Equipment EXPAND... THE USE OF YOUR FORKLIFT Load Sand & Gravel Do Jobsite Clean-Up Remove Snow Elevate Roof Gravel Handle Roof Tear-Off Trash Backfill Behind High Walls Reaches where loaders can t... Designed for extendable-reach forklifts, Star Forklift Buckets permit placement of material far beyond the reach of a loader. Stop paying extra for a loader... The cost of a Star bucket is less than a two month loader rental. Built to last as long as your forklift... Rugged heavy-duty construction ensures long life. TWO STYLES TO CHOOSE FROM Quick-Tach 1. Connects directly to the end of boom by means of the quick-tach thus providing a solid connection between the bucket and forklift. Specify forklift make and model when ordering QT buckets. 2. Long forks are not a problem with the QT style because the forks and carriage are removed when the bucket is installed. Always choose the QT style bucket if the forks on your forklift are longer than 48". 3. More of the forklift s capacity is free to lift heavier loads. Dropping the forks and carriage saves 700 to 1,000 lbs. Slip-on-the-Forks 1. Universal Fit - can be used with any make and model of extendable-reach forklift that is equipped with standard 48" long forks. Bucket slides on the forks and is pinned behind the heel to secure it to the forklift. 2. Forks and carriage stay on forklift, therefore they are less vulnerable to loss or damage. Quick to install. 3. Deeper bucket carries irregular shaped loads easier. Because the bucket is substantially deeper, debris such as broken concrete, lumber scraps, and other trash stays in the bucket better. It also has greater capacity.

Quality Made in the USA Heavy Duty Construction Hard carbon steel cutting blade on leading edge and sides Heavy 3/16" and 1/4" plate construction 1/2" x 3" scuff bars protect bottom and extend bucket life Quick-Tach Style Slip-on-the-Forks Style Attaches directly to end of boom by means of forklift quick-tach Available for most forklifts Bucket approx. 35" deep Accepts forks up to 7" wide x 48" long Positive locking system keeps bucket secured to forks Bucket approx. 51" deep Forklift Attachments QT Standard QT HB series Standard Model 1408BHC Model 1496HC Optional Bolt-On Blade 5/8" x 8" Double Bevel Bolt-On Blade can extend bucket life 3 times or more. Available on both Quick-Tach and Slip-on-the-Forks style buckets. "QUICK-TACH" BUCKETS Model Width ID Capacity Weight 1460 60" 0.80 cuyd ± 640 lbs. 1460HB 60" 1.00 cuyd ± 754 lbs. 1472 72" 1.00 cuyd ± 715 lbs. 1472HB 72" 1.25 cuyd ± 840 lbs. 1496 95" 1.25 cuyd ± 875 lbs. 1496HB 95" 1.65 cuyd ± 1020 lbs. 1496HC 95" 2.00 cuyd ± 1290 lbs. Gehl Dynacarrier, JCB QFit and Pettibone quick-taches require HB or HC series buckets. UNIVERSAL FIT "Slip-on-the-Fork s" BUCKETS Model Width ID Capacity Weight 1400B 60" 1.00 cuyd 555 lbs. 1406B 72" 1.20 cuyd 610 lbs. 1408B 95" 1.60 cuyd 740 lbs. 1408BHC 95" 2.00 cuyd 900 lbs. Fork Pocket Size: 48" long x 7¾" x 3" ID Center to Center of Fork Pockets: 38" Pocket Ends are closed 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 9

Heavy Duty SELF DUMP BUCKET Turns your Forklift into a Loader NOW AVAILABLE with HYDRAULIC DUMP Model 1445SD shown Slips on the forks Installs in minutes no modification to forklift required Rope Release trips bucket. Load sand, gravel, mulch or most any loose material.

Manual Dump or Hydraulic Dump The Self-Dump Bucket is perfect for anyone that wants to load loose materials and owns a forklift but doesn t own a loader. Installation is quick and easy. The bucket simply slips on the forks no hydraulics - no modifications to the forklift. Manual Dump Operation is simple, after disengaging the safety lock, the bucket can be tripped with the handle at the back of the bucket or from the operator s seat with the remote rope release. Lowering the bucket to the ground resets the bucket for the next load. The ¼, ½ or ¾ cuyd. capacity is an ideal size for the masonry supply, landscape supply or anyone that wants to load small quantities of sand, top soil, mulch, landscape materials, etc. It is also great for clean-up work around an equipment or supply yard. Optional Hydraulic Dump is convenient and it provides precise control of the discharge. Hydraulic flow from the forklift is required and hydraulic control valve is not included. Frequently if the forklift is equiped with a hydraulic fork positioner, flow from that valve can be diverted to the bucket cylinder. Forklift Attachments Safety Lock prevents accidental tripping of bucket during transportation. Heavy duty construction and a dependable trip mechanism ensures long trouble-free life. An affordable low cost makes this bucket easy to justify even for the occasional user. MANUAL DUMP BUCKETS Illustration shows bucket in dump position. B Model Width Capacity Weight 1440SD 45" ID ¼ cuyd 420 lbs. 1445SD 45" ID ½ cuyd 445 lbs. 1472SD 72" ID ¾ cuyd 710 lbs. D C HYDRAULIC DUMP BUCKETS Model Width Capacity Weight 1445SDH 45" ID ½ cuyd 475 lbs. 1472SDH 72" ID ¾ cuyd 740 lbs. A Model A B C D ¼ cuyd 57" 18" 19" 60" ½ cuyd ¾ cuyd 65" 25" 23" 52" Fork Pocket Size: 48" long x 6 3 /8" x 2" ID / Center to Center of Fork Pockets: 22" / Dealer: 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Pocket Ends are closed. Operating Manual/Safety Information Available online - Bulletin: SDB 0907 11

HEAVY DUTY JIB Star Attachments Turn a Forklift into a Whole Fleet of Equipment Extend the Reac each of Your For orklif klift FARTHER HIGHER OVER OBSTRUCTIONS Model 1360B TELESCOPES TO 12 FT. Expand the Capabilities of your Forklift Reach over or under obstructions to place heavy loads Set equipment on the roof or elevated decks Reach through narrow openings such as windows to set or pick up a load Load and unload trucks easier and more safely Reach into motor freight vans to load or unload materials and equipment Load, move, and handle equipment in your equipment yard Reach over scaffold to set stone or other heavy masonry units Hang trusses and laminated wood beams

HEAVY DUTY JIB Specifications Designed for use on both straight-mast and extendable-reach type forklifts Telescoping two section tubular steel boom Manually telescopes from 7'0" to 12'0" - Pull spring-loaded pin to telescope - release pin and boom locks in desired position Internal stop ensures telescoping section can not be accidently pulled all the way out Heavy chain and grab hook secures jib to forklift carriage Universal fit (slip-on-the-forks) design permits use on most all forklifts One swivel hook is included MODEL 1360B Max Load Cap. 6,000 lbs. Empty Weight 570 lbs. Extends 7' 0" to 12' 0" Vert. Center of Gravity Centerline Horz. Center of Gravity: Fully Retracted 36-5/16" Extended Midway 43-3/4" Fully Extended 54-7/16" Forklift Attachments Large Fork Pockets Accept Most Forks 3½" X 7½" I.D. 24" 32" END VIEW HOOK POSITION 4 12' HOOK POSITION 3 9' HOOK POSITION 2 7' HOOK POSITION 1 4' CAUTION: BE AWARE THAT FORKLIFT RATED CAPACITIES DIMINISH RAPIDLY WHEN THE LOAD CENTER IS MOVED OUT. WHEN USING THE JIB, MAKE SURE YOUR FORKLIFT HAS ADEQUATE CAPACITY TO HANDLE THE DESIRED EXTENDED LOAD. SEE BOTH THE HEAVY DUTY JIB AND YOUR FORKLIFT OPERATOR S MANUALS FOR MORE INFORMATION. LOAD CAPACITIES SHOWN HERE ARE FOR THE JIB ITSELF AND DO NOT IN ANY WAY REFLECT THE LIFT CAPACITY OF THE FORKLIFT. HOOK POSITION 4 3 2 1 DISTANCE 12' 0" 9' 0" 7' 0" 4' 0" Maximum Load Capacity on a Single Hook Fork Pocket Size: 30" long x 7½" x 3½" ID / Center to Center of Fork Pockets: 24" / 2,000 lbs. 3,000 lbs. 4,000 lbs. 6,000 lbs. Pocket Ends are open. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 13

Quick-Tac ach TR TRUSS BOOMS Star Attachments Turn a Forklift into a Whole Fleet of Equipment Expand the Capabilities of your Forklift Reach Farther Reach Out up to 15' Farther Lift Higher Save Money Gain up to 15' in Height Gain the Advantages of Star QT Truss Booms Save the Cost of a Crane... Your forklift and a Star QT Truss Boom can replace a crane on many low rise jobs. It is ideal for metal building erection, setting wooden trusses, putting up post frame buildings and many more crane type jobs. Faster and more Maneuverable... Take advantage of the speed and maneuverability of RT Extendable Reach Forklifts to increase production on low rise crane type jobs. A Star QT Truss Boom and your forklift, even on rough and muddy jobsites, will get the job done faster and at less cost. Rugged Construction to Protect Against Damage... On or off the forklift, the fully welded, square tube construction of Star QT Truss Booms ensure strength and durability. It s a truss boom that is built to last!

Low Profile Quick-Tach Truss Boom (used with most forklift models) Heavy Duty Pintle-Hitch provides a safe and convenient attachment point Wide Back Quick -Tach Truss Boom (required for extra wide quick-tach designs) "A" Effective Length "A" Effective Length Model 1320 Low Profile 12 ft. Truss Boom (model 1310 & 1325 similar) "A" Effective Length Model 1302 2 ft. Truss Boom Forklift Attachments Model 1330 Low Profile 15 ft. Truss Boom (model 1335 similar) "C" "B" STYLE MODEL "A" Effective Length "B" Back Height "C" Back Width Load Capacity Empty Weight Overall Length Low Profile Truss Boom Rear View "C" 1 Low Profile Truss Boom 2 Wide Back Truss Boom 1302 2' - 0" 26.5" 31" 10,000 lbs. ± 370 lbs. 2' - 5" 1310 10' - 0" 26.5" 31" 2,000 lbs. ± 490 lbs. 10' - 5" 1320 11' - 8" 26.5" 31" 2,000 lbs. ± 525 lbs. 12' - 0" 1330 15' - 0" 26.5" 31" 2,000 lbs. ± 660 lbs. 15' - 5" 1325 11' - 11" 36" 45" 2,000 lbs. ± 720 lbs. 12' - 4" 1335 14' - 11" 36" 45" 2,000 lbs. ± 805 lbs. 15' - 4" "B" Wide Back Truss Boom Rear View 1 2 The standard "Low Profile" Truss Boom is used with most forklift models except those that utilize an extra wide quick-tach design. JCB Q-Fit, Gehl Dynacarrier, Bobcat VersaHandler and Ingersoll-Rand models VR518, VR623, VR638 quick-tach designs require the "Wide Back". Dimensions and empty weights will vary depending on which quick-tach is required. Note: Forklift make, model, quick-tach style and serial number may be required when ordering. CAUTION: Load ratings are for the truss boom only and do not reflect actual forklift load capabilities. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - Bulletin: QTTB 0408 15

HEAVY DUTY CON ONCRETE HOPPER Star Attachments Turn a Forklift into a Whole Fleet of Equipment Tur urns your for orklif klift into a NOW Available with HYDRAULICS Concrete Placer REDUCES CONCRETE PLACEMENT COSTS BY UTILIZING YOUR JOBSITE FORKLIFT LIPPERT BROS. INC STADIUM EXPANSION PROJECT OKLAHOMA STATE UNIVERSITY STILLWATER, OKLAHOMA Places Concrete in Hard to Reach Areas Saves the Additional Cost of a Pump or Crane Saves Time - Lets You Place Concrete When You Are Ready Places concrete efficiently in these and many other applications: COLUMNS WALLS PIERS BEAMS FOUNDATIONS REHAB PROJECTS ELEVATED DECKS SLOPE PAVING STAIRS & LANDINGS MASONRY WALL GROUTING POURS WITH OVERHEAD OBSTRUCTIONS

SPECIFICATIONS Universal Fit (slip-on-the-forks) Design permits use on both straight-mast and extendable-reach type forklifts. Accepts up to 7" wide forks. Swivel Chute Included - 30" effective length, swings 40 degrees (20 degrees to each side), slope of chute adjustable with chain. Discharge Gate can be controlled manually or by optional hydraulics. Handle can be positioned on either side. Heavy Duty Construction - built with heavy gauge steel - all welded construction. Simple to Install - Forks are inserted fully into the fork channels then a locking pin is simply installed behind the heel of each fork. Pins are attached with a chain to prevent loss. Optional TREMEE (elephant trunk) adapter available Model 1515 MODEL Mod. 1550 = 44" Mod. 1575 = 48" MANUAL Dump CAPACITY EMPTY WEIGHT 1550 ½ cuyd 650 lbs. 1575 ¾ cuyd 770 lbs. Easy to Clean-Up Simple to Use MODEL HYDRAULIC Dump CAPACITY EMPTY WEIGHT 1550H ½ cuyd 700 lbs. 1575H ¾ cuyd 820 lbs. Forklift must be equipped w/ auxilary hydraulics Includes hyd. cylinder, control valve, hoses and quick disconnects. Mod. 1550 = 44" Mod. 1575 = 48" Forklift Attachments Mod. 1550 = 46" Mod. 1575 = 49" Front View Shown w/o chute 8" I.D. 39 ½" 30 ½" 48 ¾" Note: Dimensions are the same for all models except as noted. 51" 65 ¼" Side View Shown with chute @ 25º slope Fork Pocket Size: 48" long x 7¾" x 3" ID / Center to Center of Fork Pockets: 38" / 4101 Garland Dr. Ft. Worth, TX 76117 4101 Ph. Garland 817-485-6073 Dr., Fort Fax Worth, 817-428-6008 TX 76117 Ph 817-485-6073 USA & Canada Toll Fax Free 817-428-6008 800-541-1797 USA & Canada Toll Free 800-541-1797 Pocket Ends are open. Operating Manual/Safety Information Available online - Bulletin: CH 0204 17

Heavy Duty SELF-DUMPING HOPPERS Star Attachments Turn a Forklift into a Whole Fleet of Equipment Narrow ½yd Hopper passes through standard 3' - 0" Doorway STAR HOPPERS AVAILABLE IN FIVE POPULAR SIZES: ½ cubic yard Narrow 1 cubic yard 1½ cubic yard Shown with optional casters 2 cubic yard 2½ cubic yard Heavy vy Duty - Construction Grade other sizes available Star Heavy Duty Self-Dumping Hoppers are constructed of 1/4" and 3/16" steel plate to withstand the use and abuse of a fast moving construction job. These are not the thin sheet metal hoppers you find in many industrial plants but rugged long lasting hoppers designed for the construction industry. Ideal for removing broken-up concrete, plaster, brick and other construction refuse. Safety First... these features are standard on all Star Self-Dumping Hoppers. Hopper Safety Lock - a separate lock prevents the hopper from inadvertently dumping when traveling over rough terrain. Rope Release - permits releasing the latch from the ground or from the operator s seat. Forklift operator can discharge the hopper safely even when it is elevated. Safety Chain and Grab Hook - secures the hopper to the forklift. Ensures the hopper will not slide off the forks when traveling or dumping. Universal Fit - Can be used with both straight-mast and extendable-reach forklifts. Pocket Base accommodates forks up to 10" wide and 2 ½" thick.

Heavy Duty SELF-DUMPING HOPPERS Safety Features Standard on all Hoppers Safety Chain & Storage Hook Safety Lock Release Handle Rope Release secures hopper to forklift and prevents hopper from accidentally sliding off forks. The hook keeps the chain out of the way when not in use. prevents accidental discharge when transporting a load. Must be disengaged before hopper will dump. Heavy-Duty Casters Model 1800-05 Options at the back of hopper can be used to dump the load or... Lifting Hooks Model 1800-LH can be used to trip the hopper from the ground or from the operators seat. Forklift Attachments Star Self-Dumping Hoppers are available with Heavy-Duty Steel Casters and 8" diameter Polyurethane Wheels with Roller Bearings. The combination of the larger wheel size, roller bearings, and the polyurethane tire material makes it easier to push the hopper over trash and foreign objects. Rear wheels swivel for easy maneuverability. Casters are bolted to hopper (not welded) so they can be easily replaced if damaged. Optional Lifting Hooks (eyes) are available for handling hoppers with a crane. A hook is welded to each corner of the hopper. Shackles should be used to attach slings to hooks. Heavy duty hooks are designed to handle the weight of empty hopper plus it s full rated load capacity. Please Note: Hopper can not be discharged while suspended with a crane. MODEL CAPACITY WEIGHT CAPACITY * (w/o casters) BASE DIMENSIONS TOP DIMENSIONS OVERALL HEIGHT (w /o casters) WEIGHT (w /o casters) * Note: Weight capacity of hoppers with casters is 4,000 lbs less the weight of the hopper. Fork Opening Width Fork Opening Height 1805N ½ cuyd 4,000 lbs. 42" x 32" 49" x 32" 36" 420 lbs. 23 ½" 2 ¾" ID 1810 1 cuyd 6,000 lbs. 48" x 39" 62" x 39" 39" 605 lbs. 30 ¼" 2 ¾" ID 1815 1½ cuyd 6,000 lbs. 55" x 43" 67" x 45" 46" 755 lbs. 35 ½" 2 ¾" ID 1820 2 cuyd 6,000 lbs. 57" x 58" 66" x 57" 48" 925 lbs. 32" 2 ¾" ID 1825 2½ cuyd 6,000 lbs. 57" x 58" 67" x 57" 55" 955 lbs. 32" 2 ¾" ID HOPPERS ARE PRIMED AND THEN COATED WITH BLACK ENAMEL. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 19

Heavy vy Duty TRASH HOPPERS Designed for extendable reach forklifts Makes Cleanup Simple as... 1. Forklift places hoppers where they are needed on the floor, elevated deck, or roof. 2. Workmen load them up as work progresses. 3. When the hopper is full, the forklift picks it up and carries it to the disposal area to dump simple and convenient! Ideal for... General jobsite trash handling. Drop from masonry saw brick & block cutting. Rehab Projects. Re-roofing Jobs. Even as an elevating platform for material and equipment. Easy-To-Load Design Front completely open for unrestricted access. Material can be... Wheeled in with wheelbarrows. Dumped from power buggies. Loaded by compact loaders. Thrown in by hand. Universal Fit Fits most all forklifts - slip on forks design Fork Pockets accept forks up to: 2 ¾" thick x 7" wide x 60" long Attaches fast and easy to forklift with simple pin locking system. Rugged All Steel Construction Durable 3/16" plate steel for shell and sides. Full length fork channels add strength to bottom and assure the correct forklift pick-up points. Edges and corners are heavily reinforced for greater strength and rigidity. Cleaner and Safer Eliminates dust and airborne material associated with chutes and slides. Eliminates dangers associated with trash being dumped directly from elevated decks. MODEL SIZE VOLUME MAXIMUM LOAD CAP. EMPTY WEIGHT 1420 5' w x 3' h x 5' d 2.7 cuyd 5,000 lbs. 740 lbs. 1425 5' w x 4' h x 5' d 3.7 cuyd 5,000 lbs. 840 lbs. 1430 7' w x 4' h x 5' d 5.0 cuyd 5,000 lbs. 985 lbs. Fork Pocket Size: 60" long x 7¾" x 3" ID / Center to Center of Fork Pockets: 38" / Pocket Ends are closed.

NEW Universal-Fit LIFT HOOKS Star Attachments Turn a Forklift into a Whole Fleet of Equipment Designed to utilize the full capacity of your forklift. The hook point is located at the standard 24" Load Center where most forklifts are rated. Can be used with both straight-mast and extendable-reach forklifts. Fork Pockets are extra wide to accept up to 7" wide by 2¾" thick forks and are spread to 34" on center for operator convenience. Heavy Duty Swivel Hook with keeper and screw pin anchor shackle are included. LIFT UP TO 12,000 LBS. SAFELY AND SECURELY Meets / Exceeds OSHA & ANSI requirements Don t get a citation - OSHA prohibits straps, cables or chains around bare forks. Forklift Attachments Lift Hook slides on the forks and is pinned behind the heel to secure it to the forklift. Rugged heavy duty construction ensures long term durability. Overall dimensions: 42"W x 12"H x 28½"L MODEL CAPACITY WEIGHT 1370B 10,000 lb. 271 lbs. 1371B 12,000 lb. 277 lbs. Fork Pocket Size: 28½" long x 7½" x 2 7 /8" ID / Center to Center of Fork Pockets: 34" / Pocket Ends are open. Operating Manual/Safety Information Dealer: Available online - 4101 4101 Garland Garland Dr., Dr., Fort Fort Worth, Worth, TX 76117 TX 76117 PH Ph 817-485-6073 817-485-6073 FAX Fax 817-428-6008 817-428-6008 TOLL FREE USA & CANADA 800-541-1797 USA & Canada Toll Free 800-541-1797 21

Lift-N-Tows MEETS / EXCEEDS OSHA & ANSI REQUIREMENTS Shown with optional Combo Hitch - Model 1392 Model 1390B Receiver/Jib accepts Standard 2" Trailer Adapter 10,000 lbs. Maximum Gross Towing Weight 2,000 lbs. Maximum Tongue Weight 4,000 lbs. Maximum Lift Capacity on Swivel Hook Accepts Forks up to 6" wide x 2¾" thick Overall Dimensions (w/o adapter) - 20" W x 9.5" H x 54" L Weight (w/o adapter) - 220 lbs. DON T GET A CITATION OSHA prohibits the practice of torching a hole in the fork for a ball. Universal Fit Slips on Forks style Chain & Hook secures Lift-N-Tow to forklift NEW Super Duty Model 1395B Shown with optional Pintle Hitch - Model 1394PH Receiver/Jib accepts 2½" Trailer Adapter 16,000 lbs. Maximum Gross Towing Weight 3,000 lbs. Maximum Tongue Weight 10,000 lbs. Max. Lift Cap. on Swivel Hook Accepts Forks up to 8" wide x 2¾" thick Overall Dims. (w/o adapter) - 44" W x 14" H x 54" L Weight (w/o adapter) - 400 lbs. Bulletin: LNT 0708

Lift-N-Tows Tow Load Lift Change easily from Ball, to Pintle, or Combination Hitch Lift-N-Tow & Hitches Sold Separately Forklift Attachments ADAPTER with 2" BALL Model 1391 ADAPTER with PINTLE HITCH Model 1392 /1394PH ADAPTER with COMBO HITCH Model 1393 /1394CH HITCH ADAPTERS MODEL for Horizontal Style Max. Max. Gross Weight Lift-N-Tow Center of Adapter Vertical Lift Tow ing Weight (Adapter Only) Model of Gravity 1391 2" Ball 600 lbs. 6,000 lbs. 28" 10 lbs. 1392 1390B Pintle 2,000 lbs. 10,000 lbs. 29" 15 lbs. 1393 Combo 2,000 lbs. 10,000 lbs. 30" 20 lbs. 1394PH Pintle 3,000 lbs. 16,000 lbs. 29" 21 lbs. 1395B 1394CH Combo 3,000 lbs. 16,000 lbs. 30" 25 lbs. MODEL Max. Lift Capacity on Swivel Hook LIFT-N-TOWS (Hitch Adapters sold separately) Max. Lift Capacity on Receiver/Jib Max. Gross Towing Weight * * Weight w /o Hitch Adapter 1390B 4,000 lbs. 2,000 lbs. 10,000 lbs. 220 lbs. 1395B 10,000 lbs. 3,000 lbs. 16,000 lbs. 400 lbs. * CAUTION: Do not exceed capacity of selected Hitch Adapter. Model 1390B Fork Pocket Size: 48" long x 6¾" x 3" ID / Center to Center of Fork Pockets: 13¼" / Model 1395B Fork Pocket Size: 48" long x 8¾" x 3" ID / Center to Center of Fork Pockets: 34¾" / Pocket Ends are open. Pocket Ends are open. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 23

LOAD-N- AD-N-TOW Built Strong to Last - Universal Fit The Best Way to load and unload Rental Equipment LOAD N TOW LOAD N TOW Now, One Man can Quickly and Safely Load and Unload awkward heavy equipment that is otherwise difficult to handle. The he New w Load-N-Tow ow SHORTEN CUSTOMER WAIT TIME CUT LABOR COSTS PREVENT BACK INJURIES REDUCE DAMAGE TO EQUIPMENT LOAD N TOW Ramp lowers for easy loading and unloading. Spring loaded pin locks ramp in up position for secure and safe transportation of load. Built-in receiver for moving trailer mounted equipment. Accepts standard 2" sq. trailer adapter. (Shown with optional adapter and ball.) LOAD-N-TOWS MODEL DESCRIPTION WEIGHT 1397 42" wide x 48" deep 305 lbs. 1398 48" wide x 48" deep 330 lbs. OPTIONAL TRAILER ADAPTERS MODEL DESCRIPTION WEIGHT 1391LD Raised Trailer Adapter & 2" Chrome Ball 10½ lbs. 1392 Trailer Adapter & Pintle Hitch 24½ lbs. 1393 Trailer Adapter & Combo Hitch 30 lbs. Convenient attachment point for suspended loads gives added versatility. Fork Pocket Size: 48" x 6½" x 2¾" ID / Center to Center of Fork Pockets: 24" / Pocket Ends are closed.

NEW SAFETY LOADING PLATFORM Star Attachments Turn a Forklift into a Whole Fleet of Equipment New w For orklift Safety Loading Platf tform Similar to our popular Load-N-Tow ow But simpler in design and at a lower price everyone can justify Slide It on the forks and one man loads and unloads heavy awkward rental equipment quickly and safely, plus the Safety Loading Platform... SHORTENS CUSTOMER WAIT TIME CUTS LABOR COSTS PREVENTS BACK INJURIES REDUCES DAMAGE TO EQUIPMENT MODEL 1385 Forklift Attachments Look at these great features: Fixed 15" Ramp for easy loading End and Side Fork Pockets pick up platform from either direction Slots for standard 2" straps to secure load when needed Simple Retaining Bar keeps load from rolling or sliding off Large 48" x 48" deck handles most all small to medium equipment Rugged heavy duty construction ensures durability for years to come convenient side fork pockets side fork pockets Specifications Model 1385 Accepts forks up to 2.75" thick x 7" wide x 48" long Overall Dimensions 50" wide x 65" long x 8.5" high 36" Safety Chain and Hook secures platform to forklift Load capacity 1,000 lbs. Empty Weight 305 lbs. End Fork Pocket Size: 48" long x 7 5 /8" x 2 7 /8" ID / Center to Center of Fork Pockets: 33" / Side Fork Pocket Size: 8" x 3" ID / Center to Center of Fork Pockets: 24" / Pocket Ends are closed. Pocket Ends are open. Dealer: 4101 Garland Dr., Dr., Fort Fort Worth, Worth, TX 76117 TX 76117 PH Ph 817-485-6073 FAX Fax 817-428-6008 TOLL USA FREE & Canada USA & CANADA Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 25

Replacement Forks & Bars REPLACEMENT FORKS High Quality Forks are Forged from one piece of steel, then fully heat treated for strength and increased resistance to bending. Low Price Call for a quote You will like our prices All Types Available Any style or size of fork you need Shaft-Mounted for telehandlers and rough terrain forklifts ITA for warehouse forklifts Hook & other unique styles ITA & HOOK MTD. FORKS SHAFT MOUNTED PALLET FORKS BLOCK FORKS (Cubing Forks) LUMBER FORKS (Fully Tapered & Polished) REPLACEMENT BARS Model No. Finished Shaft Size (dia.) Carriage Width * (out to out) Weight FP20048 2.0" 48" 48 lbs. FP20060 2.0" 60" 59 lbs. FP20072 2.0" 72" 69 lbs. FP22548 2.25" 48" 60 lbs. FP22560 2.25" 60" 74 lbs. FP22572 2.25" 72" 87 lbs. *exact measurement needed

Heavy Duty Fork Extensions Get More Fork Under Bulky Loads Forklift Attachments Quick and Easy One Man can install or remove in seconds MODEL Overall Length FITS WEIGHT per set 1664 72" 4" x 48" forks 108 lbs. 1665 72" 5" x 48" forks 113 lbs. 1666 72" 6" x 48" forks 148 lbs. Note: Can be shipped UPS Things You Should Know About Fork Extensions Overall length of fork extension must not exceed 150% of fork length. Inside width of fork extension must not be more than ½" wider than fork. Forklift capacity is substantially reduced when center of load is moved out beyond standard 2 ft. load center. Do not pick up load with tip of fork extensions. Load must be centered on fork extensions or closer to the backstop. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 27 Bulletin: FXT 0708

Heavy Duty AUGERS Ideal for all drilling applications - from DIRT to CONCRETE and even SOLID ROCK. Rugged planetary drive units feature heavier components than any competitors and will outperform all other drives in their class. Paired with the correct auger, they can handle any drilling need. Star Hydraulic Auger Drives are available in Medium and Heavy Duty models for systems operating between 6 and 35 GPM and 2000 to 3000 PSI. Systems operating over 3000 PSI need a Heavy Duty Pressure Relief Valve, Model 160-HDPRV + + + = frame hose kit drive auger complete assembly DRIVE SPECIFICATIONS Recommended Fluid Flow Maximum Output Torque Maximum Pressure-Continuous Recommended Max. Auger Dia.-Rock Recommended Max. Auger Dia.-Dirt Auger Drive Output Shaft Coupler Drive Weight OUTPUT SPEED OUTPUT TORQUE Pressure - PSI 2,000 2,500 3,000 Medium Duty Recommended for Mini Skid-Steers only Model 160D-615M 6-15 gpm 1,419 ft. lbs. 3,000 psi 10-20 gpm 1,777 ft. lbs. 3,000 psi 10-20 gpm 2,000 ft. lbs. 3,000 psi 15-30 gpm 3,000 ft. lbs. 3,000 psi 20-35 gpm 3,500 ft. lbs. 3,000 psi n/a 24" 2" Hex n/a 36" 2" Hex 24" 30" 2" Hex 36" 36" 2" Hex 36" 36" 2" Hex 120 lbs. 150 lbs. 185 lbs. 188 lbs. 190 lbs. Flow Speed Flow Speed Flow Speed Flow Speed Flow Speed 6 gpm 39 rpm 10 gpm 52 rpm 10 gpm 48 rpm 15 gpm 47 rpm 20 gpm 51 rpm 8 gpm 52 rpm 12 gpm 62 rpm 12 gpm 55 rpm 18 gpm 56 rpm 24 gpm 62 rpm 10 gpm 65 rpm 14 gpm 73 rpm 14 gpm 64 rpm 22 gpm 68 rpm 26 gpm 67 rpm 12 gpm 78 rpm 16 gpm 83 rpm 16 gpm 73 rpm 26 gpm 81 rpm 28 gpm 72 rpm 14 gpm 91 rpm 18 gpm 93 rpm 18 gpm 82 rpm 28 gpm 87 rpm 30 gpm 77 rpm 15 gpm 104 rpm 20 gpm 104 rpm 20 gpm 92 rpm 30 gpm 93 rpm 35 gpm 90 rpm 946 1,182 1,419 Model 160D-1020M Model 160D-1020 Torque - ft. lbs. 1,185 1,339 1,481 1,675 1,777 2,008 Heavy Duty Model 160D-1530 1,958 2,450 2,937 Model 160D-2035 2,388 2,985 3,582

Heavy Duty A UGERS The mounting Frame, constructed of heavy wall tubular steel, features the largest and strongest cradle on the market. A weatherproof tube for convenient storage of operator s manual is also incorporated into its rugged design. Model 160QT-SS for Skid-Steer Loaders Model 160QT-FL for Telehandlers Model 160QT-MSS for Mini Skid-Steer Loaders Model 160QT-BH for BackHoe Excavators Hose Kit required with each Auger Drive. Includes two ½" x 96" hoses in a protective sleeve and flat face hydraulic quick couplers. Model 160HK Heavy Duty 2" hex coupler Shaft Extensions available in lengths from 24" to 72". Model 160A-E Dirt Augers Model 160A-D 48" OAL These are the most common used augers and are specified for moderate soil conditions such as dirt, clay and small fractured rock. These durable augers feature a fabricated boring head, hardened bolt-on teeth, hardened bolt-on fishtail pilot, 3 /8" thick double flight and a 3¼" tubular shaft. Available in 6" - 36" dia. Operator s Manual storage Drive Adapters available for Hex to round or Round to hex. Model 160A-AD01 Adapts 2" Hex Drive to 2½" Round Drive Model 160A-AD02 Adapts 2½" Round Drive to 2" Hex Drive Model 160QT-SS for Skid-Steer Loaders T-Post Augers Model 160A-TP2 For drilling T-Post holes in dirt, clay, compacted soils, frozen ground, fractured rock, solid rock and concrete. Features 2" dia. replaceable carbide pilot and 1 5 /8" by 38" OAL solid stress proof shaft. Drilling depth - 30" Rock Augers Model 160A-R Model 160QT-BH for BackHoe Excavators Model 160QT-MSS for Mini Skid-Steer Loaders Features removable side swing adapter. Loader Attachments & Buckets Heavy Duty Augers Model 160A-HD 48" OAL A very rugged auger for tough ground conditions. Recommended for compacted soils, heavy clay, asphalt, frozen ground, and fractured rock. HD Augers feature a cast boring head with replaceable Pengo style drive-in teeth, hardened bolt-on fishtail pilot, 3 /8" thick double flight and a 3¼" tubular shaft. Available in 6" - 36" dia. 48" OAL Our most rugged auger for your most difficult drilling conditions. These augers are designed for solid rock, concrete, fractured rock, frozen ground and compacted soils. Larger 8" to 36" dia. augers feature a pilot 6" dia. 8" - 36" dia. on a 2 3 /8 " API Sub, ¾" double flight boring head with Rockwell 65 hardfacing, replaceable carbide bullet teeth and 3 /8" double flight on 3¼" tube. Smaller 6" dia. augers feature a welded pilot, replaceable carbide bullet teeth and 3 /8" double flight on 2 3 /8 " solid steel shaft. A 2 3 /8 " API Sub Dirt Pilot is also available. Available in 6" - 36" dia. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 29

Roo oot t Grapples & Grapple Buckets ts for Skid-Steer Loaders Roo oot Grapples HEAVY DUTY AND DEMOLITION GRADES ROOT GRAPPLE & GRAPPLE BUCKET BENEFITS: Model 170-72 Heavy Duty Root Grapple MOVE BULKY HARD-TO-HANDLE MATERIALS EASILY AND SECURELY. IDEAL FOR LOADING OR PILING LOGS AND BRUSH. BEST CHOICE FOR CLEAN-UP OF DEMOLITION AND STORM DEBRIS. ROOT GRAPPLES LET THE DIRT SIFT OUT WHEN LOADING LARGE ROCKS AND TRASH. ROOT GRAPPLE TINES CURVE UPWARD - PREVENTS CATCHING UTILITY LINES OR CABLES IN STORM CLEAN-UP. THE PERFECT CHOICE FOR LAND CLEARING DEMOLITION CONSTRUCTION LANDSCAPING STORM CLEAN-UP ROOT GRAPPLE & GRAPPLE BUCKET FEATURES: RUGGED HEAVY DUTY CONSTRUCTION FOR DEPENDABILITY AND LONG LIFE. HYDRAULIC CYLINDERS OPERATE INDEPENDENTLY TO ADJUST FOR UNEVEN LOADS. HYDRAULIC CYLINDERS, HOSES AND FITTINGS ARE PROTECTED WITH COVERS. GREASE ZERKS AT ALL PIVOT POINTS. CUTTING EDGES ARE PUNCHED FOR OPTIONAL BOLT-ON-BLADE. OPTIONAL INTERMEDIATE BOTTOM TINES - REDUCES SPACE BETWEEN TINES. Cylinder Hoses routed in enclosed tube. Built-in cover protects fittings. Model 170DG-72 Larger Capacity Demolition Grade Root Grapple Heavy Duty Heavy Duty Demolition Grade 66" Root Grapple 72" Root Grapple 72" Root Grapple Specifications: Model 170-66 Model 170-72 Model 170DG-72 Width I.D. 66" 72" 72" Grapple Capacity 15.8 cuft. 17.2 cuft. 19.7 cuft. Grapple Opening 35½" 35½" 42¾" Depth 38" 38" 42" Back Height 21" 21" 21" Sides ½" Plate ½" Plate ½" Plate Grapple Thickness 1/2" 1/2" 9/16" Tine Thickness ½" ½" ½" Tine Height 3½" 3½" 5" Distance betw een Tines approx. 8½" approx. 8½" approx. 8½" HD Welded Hyd Cylinders 2"x10"x1¼" 2"x10"x1¼" 2"x10"x1¼" Hyd Hoses & Flat Faced Couplers Included Included Included Empty Weight 725 lbs. 750 lbs. 950 lbs. Note: Demolition Grade is especially recommended for Track style Skid-Steers and those with 70Hp or 3,500 lbs. capacity or greater.

Grapple Buckets ts HEAVY DUTY and DEMOLITION GRADES Grapples open wide for full load. Cutting edges are punched for optional Bolt-on-Blade. Steel plate ribs ½" thick reinforce and protect bucket bottom. Model 175-72 Heavy Duty Grapple Bucket Model 175DG-72 Demolition Grade Grapple Buckets Feature larger capacity, inside reinforcement gussets, and heavier components for greater durability in tough applications. Loader Attachments & Buckets Optional End Plates help contain loose materials. Grease Fittings are protected from damage by raised rings. Heavy Duty Heavy Duty Demolition Grade 66" Grapple Bucket 72" Grapple Bucket 72" Grapple Bucket Model 175-66 Specifications: Model 175-72 Model 175DG-72 Width I.D. 66" 72" 72" Grapple Opening 38½" 38½" 45" Grapple Capacity 16.5 cuft. 18 cuft. 24 cuft. Bucket Capacity (w ith end plates) 11.6 cuft. 12.66 cuft. 16.6 cuft. Depth 34" 34" 39" Bucket Back Height 19" 19" 21" Bucket Bottom ¼" Plate ¼" Plate ¼" Plate Bucket Back 3/16" Plate 3/16" Plate 3/16" Plate Sides ½" Plate ½" Plate ½" Plate Bottom Wear Protection ½" Ribs ½" Ribs ½" Ribs Grapple Thickness ½" ½" 9/16" Cutting Edge ¾" x 6" ¾" x 6" 1" x 8" HD Welded Hyd Cylinders 2"x10"x1¼" 2"x10"x1¼" 2"x10"x1¼" Hyd Hoses & Flat Faced Couplers Included Included Included Empty Weight 775 lbs. 800 lbs. 1,000 lbs. Note: Demolition Grade is especially recommended for Track style Skid-Steers and those with 70Hp or 3,500 lbs. capacity or greater. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 31

4 IN IN 1 BUCKET KETS for Skid-Steer Loaders FOUR BUCKETS IN ONE 1. Conventional Loader Bucket 2. Dozer Blade 3. Grapple / Clam-Shell Bucket 4. High Dump (Bottom Dump) Bucket Conventional Bucket Dig, load, carry, spread... just like a conventional bucket. Optional teeth can be added for increased digging capabilities. Dozer Blade Great for trench and other backfill applications. Use to push loose materials and snow. Also works well as a land leveler. Grapple Clam-Shell Bottom Dump Bucket Pick up logs, large rocks, brush, tree stumps, debris, and more, much like you would with a dedicated grapple bucket. Also use the clam action to capture small piles of loose material that is often difficult to load with a conventional bucket. Need to dump into tall trucks or trash bins? Utilize the bottom dump feature to discharge at maximum lift heights. When spreading gravel or other loose material, the bottom dump also allows easy metering for uniform spreading. Got a sticky load? It is easier to discharge with the bottom dump. The Star 4 in 1 Bucket is a Versatile Multipurpose Tool Use it for digging, dumping, loading, spreading, grading, dozing, as well as for grapple and clam-shell work.

Heavy Duty 4 in 1 Buckets Features & Benefits Bucket Sides are serrated along clam opening for better gripping Grease Zerks provided at all pivot points Zerks are recessed for protection Hydraulic Cylinder Hoses are routed thru steel tubing for protection Nylon Sleeve helps protect hoses from cuts & abrasion - keeps pairs together Powerful 2½" X 8" Hydraulic Cylinders with 1¼" dia rod & 1" pins - 3000 PSI Bucket furnished complete with Hydraulic Hoses and flush faced couplers Heavy Duty 1" dia hydraulic cylinder pins & 1¼" dia. Clam Action pins Super Strong Bucket Back incorporates 6½"X 4"X ¼" top channel section and 4¾"X 4"X ¼" bottom channel section ¾" X 8" Double Bevel Bolt-On Blade available as an option extends bucket life 5 8 Optional Welded-On Adapters with Pin-On-Teeth increases digging ability Specifications 180-63 180-63T 180-63BOB MODELS 180-66 180-66T 180-66BOB T denotes teeth BOB denotes Bolt-on-Blade 180-72 180-72T 180-72BOB 180HC-84 180HC-84T 180HC-84BOB Bucket Width - O.D. 63" 66" 72" 84" Bucket Capacity -Heaped 12.0 cft 13.0 cft 14.0 cft 18.5 cft Clam Opening 31.9" 31.9" 31.9" 31.9" Bucket Front Cutting Edge ¾" X 6" ¾" X 6" ¾" X 6" 1" X 6" Bucket Rear Cutting Edge ½" X 4" ½" X 4" ½" X 4" ¾" X 6" Dozer Blade ¾" X 6" ¾" X 6" ¾" X 6" ¾" X 6" Bucket Bottom ¼" plate ¼" plate ¼" plate 3/8" plate Inside Bottom Liner 3/16" plate 3/16" plate 3/16" plate ¼" plate Back 3/16" plate 3/16" plate 3/16" plate ¼" plate Overall Bucket Height 29" 29" 29" 29.25" Overall Bucket Depth 33" 33" 33" 38" Inside Bucket Depth 25.5" 25.5" 25.5" 30" Optional Large "Pin-On" Teeth 7 Teeth 8 Teeth 8 Teeth 10 Teeth Weight 785 lbs. 807 lbs. 850 lbs. 1332 lbs. Weight w/ Teeth 829 lbs. 857 lbs. 900 lbs. 1395 lbs. Weight w/ Bolt-On Blade 870 lbs. 896 lbs. 948 lbs. 1440 lbs. Loader Attachments & Buckets 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 33

HEAVY DUTY SKELETON BUCKETS for Skid-Steer Loaders Pick up large rocks and debris - and leave the dirt behind. Model 150-72 A Star Skelton Bucket is perfect for this purpose. The open ribbed bottom lets dirt and material less than 2½" in size fall thru while retaining the larger materials. These rugged buckets are ideal for landscape work, sorting materials, as well as for general clean-up. Good applications for Star Skeleton Buckets are found in many industries including agriculture, construction, landscaping, demolition and scrap handling. Low in cost, they are easy to justify on almost any job. What ever the application, you will find Star Skelton Buckets are strong and durable. Heavy Duty construction combined with intense emphasis on quality produces a bucket that will stand up on the toughest of jobs. Buckets are available in popular 66", 72", and 84" widths. Bottom Ribs 3 /8" thick x 2 1 /8" tall with a 4" tall raised step to help retain material. 2½" open space between ribs lets smaller particles fall thru. Overall Bucket Height 20½" Overall Bucket Depth 34" Bucket Sides and Back ¼" plate Leading edge ¾" x 6" High Carbon Beveled Blade Blade punched for Optional Bolt-on-Blade. Heavy Duty Teeth are optional. Closed Box Channel Section across top and 3¼" heavy angle section at bottom provides a strong structural backbone for the bucket. Heavy Duty Universal-Fit Skid-Steer quick-tach fits all current full size skid-steer loaders. MODEL Width O.D. Width I.D. Heaped Capacity Weight w/ Teeth w/ Bolt-on Blade w/ Plain Blade 150-66 66" 65.5" 14.2 cuft 555 lbs. 594 lbs. 505 lbs. 150-72 72" 71.5" 15.2 cuft 582 lbs. 630 lbs. 532 lbs. 150-84 84" 83.5" 18.5 cuft 658 lbs. 703 lbs. 595 lbs.

Heavy Duty Buckets for Skid-Steer Loaders BE PARTICULAR ABOUT THE BUCKET YOU BUY Star Buckets are Built Stronger & Better...Here s Why 1. Strong Hat Section provides unyielding strength across the entire top of bucket. Cut-away shows reinforcing Hat Section at top of bucket. 10. Beveled Hard Carbon Steel Blade on Leading Edge. 1/2" x 6" or 3/4" x 6" depending on bucket width. 9. Square Bottom permits back dragging to level your work. Sets close to the ground. Landscapers love it. 8. Buckets Designed to Fit each brand of loader. Even though all new skid-steer loaders use a universal quick-tach they require different bucket profiles for proper operation. Star buckets are built to match your specific make & model of skid-steer loader. Regardless of which Skid-Steer you choose, specify a Star bucket. They are built stronger, last longer and Star gives you the blade and teeth choices you want. 2. Dual Safety Steps 3. Beveled Hard Carbon Steel Side Blades. Strengthens and protects bucket sides. 4. Seams Fully Welded. Continuous weld inside and outside of shell seams provides greater strength and longer life. 5. Low Profile Design Operator can see the leading edge from the seat. Other profiles are also available. 6. Strong Universal Quick-Tach constructed of 3/8" plate steel to stand up to the new more powerful skid-steer loaders. 7. Heavy (1/2" x 3") Scuff Bars Three to five bars, depending on width, reinforce bucket bottom and protect from excessive wear. Loader Attachments & Buckets LOW PROFILE DIRT SNOW & LITE MATERIAL Styles FERTILIZER With Star Buckets You Have Choices Options UTILITY COTTON SEED Heavy Duty Teeth Heavy duty shanks weld solidly to the cutting blade. Features pin-on series 23 teeth that measure 2-1/4" across the point. Punched Blade w/ Bolt-On-Blade Increases bucket life. Add the reversible 5/8" x 8" bolt-on blade and you get more than 3 times the wear. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 35

Heavy Duty TRASH & LOOSE MATERIAL HOPPERS for Skid-Steer Loaders model 151 Handle Trash Efficiently and Easily. Hoppers attach directly to the skid-steer quick-tach making it easy to place empty hoppers where they are needed. When full, the skid-steer can quickly transport the hoppers to the disposal area and dump into larger containers or onto a trash pile. These durable hoppers are ideal for concrete rubble, wallboard scraps, drop from the masonry saw, and most any type of construction or plant refuse. Deliver & Place Landscape Materials, Sand, and other loose materials at a lower cost. Landscape contractors love the new skid-steer trash hoppers. At the yard a skid-steer can quickly fill the hoppers with landscape materials such as gravel or mulch, and load them onto the truck for delivery. At the jobsite a skid-steer picks the loaded hoppers off the truck and dumps the material right where it is needed in the landscape. This provides a streamlined efficient method for getting material from the material yard to the jobsite placement area with minimal re-handling, less material loss, and fewer costs. 18" 32¾" 51¼" 34¼" Heavy Duty Construction for long-term durability. These hoppers are built rugged. In fact, they will probably outlast your skid-steer loader. Shell & sides are constructed of rugged 3/16" steel plate. Entire Top Lip is formed into a channel section for added strength & rigidity. Heavy 1/2" x 3" flat bar is formed to provide a stable base when the hopper is free standing. Reinforced Heavy Duty Universal Quick-Tach fits most skid-steer loaders. Forklift pick-up points are provided for moving hoppers around the yard or loading onto trucks. Optional Casters makes it easy for one man to push a hopper around inside a building. MODEL ID width CAPACITY WEIGHT 151 48" 1.00 cuyd 558 lbs. 152 72" 1.50 cuyd 700 lbs. 153 84" 1.75 cuyd 775 lbs. 24 80¾" 85¾" 76½" Typical Dump position at maximum height with medium size skid-steer. Dimensions will vary with make and model of loader.

Skid-Steer FORKFRAMES with ITA Style Captive Forks Safe & Easy Two-Step Operator Access TWO FORKFRAME DESIGNS - Heavy Duty or Economy Economy Model 110EC-ITA Heavy Duty Model 110FF-ITA Extra Heavy Duty - Toughest on the Market Frame constructed of ½" x 3" Flat Bar Machined ITA Fork Carriage Bars Big 5,500 lb. Load Capacity Economy ForkFrame Clear View of forks 3,700 lb. Load Capacity Good Quality for Low cost Weight 157 lbs. Choose either 1 3 /8" x 4" x 42" or 48" forks Choose any forks shown below ITA STYLE Forks ITA Style Forks lock into position. Forks are captive and can t swing out when a load of railroad ties or other loose materials is dumped off the end of the forks. Loader Attachments & Buckets Universal Quick-Tach Big Load Capacities Forkframe & Forks SOLD SEPARATELY ITA Style Forks Lock into position All welded steel construction MODEL (Frame) Description Capacity Weight 110FF-ITA Heavy Duty - "ITA Style" Forkframe 5,500 lbs. 232 lbs. 110EC-ITA Economy - "ITA Style" Forkframe 3,700 lbs. 157 lbs. MODEL (Forks) Style # of forks Fork Dimensions Capacity Weight F138x4x42CL2 Pallet set of 2 1-3/8" x 4" x 42" 3,700 lbs. 176 lbs. F138x4x48CL2 Pallet set of 2 1-3/8" x 4" x 48" 3,700 lbs. 194 lbs. F15x4x48CL2 Pallet set of 2 1-1/2" x 4" x 48" 5,500 lbs. 214 lbs. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 37

CONCRETE PLACEMENT BUCKETS for Skid-Steer Loaders Top 100 New Products Award Winner Construction Equipment Magazine STOP STOP THE BACK-ACHE Place Concrete in Hard to Reach Areas... the easy way Simple No moving parts: no flimsy chutes to get torn up, no gates to freeze up with old concrete, no hydraulics to get contaminated with dust and dirt. Works better than complicated systems costing thousands of dollars. Extra High Back helps keep concrete splatter off the loader Rugged Built to take the abuse of a fast moving construction job. Reinforced corners strengthen the sides. The bottom is protected and strengthened by ½" thick steel bars. Overall rugged construction ensures dependability, pour after pour. This is an attachment you can use, set in the yard, and know it will work when you come back to use it. Inexpensive Simple, straight-forward design keeps costs low. Typically pays for itself on the first pour. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Bucket Capacity Overall width Discharge Opening Empty Weight Minimum Loader Cap. MODEL 120 125 ½ cuyd ¾ cuyd 55" 77" 10" 12" 420 lbs. 585 lbs. 1,350 lbs. 3,000 lbs. Caution: Do not exceed capacity of loader - Concrete weights vary - Calculate load before using.

HEAVY DUTY MIX-N-PLACE Skid-Steer Drum Mixer Model 135 The six cubic foot capacity is perfectly matched for the majority of skid-steer loaders. The Mix-N-Place is simple in design, but is built rugged so it will be dependable. The mixer is powered by a strong hydraulic motor that mounts to an extra heavy duty carrier bearing. This rugged bearing safely carries the load while protecting the hydraulic motor and seals. A heavy duty universal skid-steer quick-tach along with 3/8" plate mounting components ensures it will stand up on any job, and even withstand the toughest of rental conditions. The Mix-N-Place is supplied complete with hydraulic hoses and quickdisconnects. Just connect to your skid-steer s auxiliary hydraulics and you are ready to Mix-N- Place concrete. Put the new Mix-N-Place on your skid-steer and you have both a concrete mixer and a placer, all in one. It is the easily affordable way to mix small volumes of concrete and then place it anywhere it is needed. Today, getting less than full truckloads of concrete from a readymix company is almost impossible, and if they will deliver it, you can bet the cost will be significantly higher than the normal yardage price. In addition, wheeling concrete is very costly, slow, and labor intensive. With the Mix-N-Place you can mix the quantity you need, have it when you are ready for it, place it where it is needed, and keep the cost low. Loader Attachments & Buckets Mixer type rotating drum Aux. Hyd. requirements 8 to 10 GPM @ 2,000 PSI Capacity 6 cuft. Empty weight 298 lbs. Tilt down to place concrete. 4101 Garland Dr., Fort Worth, TX 76117 4101 Ph. 817-485-6073 Garland Dr., Fort Fax Worth, 817-428-6008 TX 76117 Ph USA 817-485-6073 & Canada Toll Free Fax 817-428-6008 800-541-1797 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - Bulletin: SSMNP 0807 39

Heavy Duty Scoop-N-Mix Concrete Mixer for Skid-Steer Loaders Model 140 LIKE HAVING A BUCKET AND MIXER ALL IN ONE. Scoop up sand and gravel in the bucket position Rotate to mixer position, add bag cement, water, & mix Discharge concrete thru side chute or Tilt mixer down and discharge out the front The new Scoop-N-Mix Skid-Steer Concrete Mixer combines the advantages of a loader and a concrete mixer into one piece of equipment. This unique product provides the most efficient and economical way to produce small quantities of thoroughly mixed concrete, transport it to often difficult to reach pour sites, and then put it in place. Producing & Placing Concrete with the Scoop-N-Mix is Simple, Fast, and Easy Rotate the mixer into a bucket loading position and, as with a loader bucket, scoop up the sand and gravel for the mix. The back-breaking labor of loading by hand is eliminated. Rotate mixer back to its upright mixing position and break bags of cement into the mixer using the built-in bag splitter. Water is then added and within a few short minutes concrete is ready for placement. Discharge Concrete in one of two ways. Either through a mechanical lift gate on the side of the mixer and down a chute, or by simply tilting the mixer down and discharging out the top. The speed and quantity of discharge can be easily controlled using either method.

See demonstration video at THE NEW SCOOP-N-MIX the fastest and most economical way to produce small volumes of good quality concrete. We are all aware that ready-mix companies don t want to deliver less than full truckloads of concrete. Furthermore, even if you can get small quantities delivered, you will pay a much higher price and will probably be the last on the list for delivery. With the Scoop-N-Mix and your skid-steer, you can produce good quality concrete within minutes, and do it without the back-breaking labor of hand loading a mixer. You will have concrete when you need it, where you need it, and at a very economical cost. The Scoop-N-Mix features a new improved design. This new design utilizes a revolving paddle mixing action, a method far superior to augers when it comes to producing well-mixed concrete. The revolving paddles are driven by a strong hydraulic motor through a dependable chain and sprocket drive. The hydraulic motor is powered by the auxiliary hydraulics of the skid-steer. The new chain and sprocket drive takes the shock-load off the hydraulic motor when mixing paddles are reversed. This protects the hydraulic motor and greatly extends motor life. Paddle shaft is carried by heavy-duty roller bearings with convenient grease zerks for easy maintenance. Replaceable neoprene pads protect the paddles and are adjustable and reversible for longer life. Abrasion Resistant Steel prolongs life of drum. Loader Attachments & Buckets Construction & Design All steel welded construction Mixing Drum abrasion resistant steel Built-in cement bag breaker Side discharge mechanical lift gate 24" x 12" Side Chute Reversible neoprene pads for mixer paddles Chain & sprocket drive Model 140 Skid-Steer Requirements Skid-Steer mounting universal quick-tach Recommended skid-steer rated capacity 1600 lbs. or greater Auxiliary Hydraulics 12 to15 gpm (high-flow not required) @ 2,000 PSI Hydraulic Hoses & Quick-Disconnects included Mixing Specifications The Scoop-N-Mix is a concrete mixer - not a grout mixer, however it can mix grout if the mix design incorporates a proper amount of 3/8" pea gravel. Mixing capacity 9 cuft. 1/3 cuyd Recommended minimum slump 3" Maximum coarse aggregate size 3/4" Mixing action reversible revolving paddles Dimensions & Weight Mixer Drum width 36" ID Overall width 50" Overall height 35" Overall depth 30" Empty weight 890 lbs. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 41

Telescoping Crane Jib for Skid-Steer Loaders Reach Up... Adds over 5 feet to loader lift height Reach Out... Adds over 6 feet of horizontal reach Pick Up... As much as *1,000 lbs. It s a Contractor actor s Tool Load generators & other small equipment Handle & Set Pipe Do Light steel erection Handle concrete forms Plus.pick, carry, & place all types of loads in areas where larger equipment just wouldn t fit. Landscaper pers Love It The Telescoping Crane Jib is ideal for loading, carrying, and setting trees and other large plants. The extra lift height makes it possible to pick trees above the balance point for safer handling. Lots of Industrial Applica pplications Plants, foundries, farms, in fact almost every industrial skid-steer user finds the Telescoping Crane Jib to be an indispensable tool. Telescoping Crane Jib Model 130 Horizontal Reach... Telescopes from 4' to 6' Vertical Reach. 5' above bottom of quick-tach Lift Capacity*.. 1,000 lbs. Shipping Weight... 280 lbs. Quick-Tach... Universal Skid-Steer Quick-Tach *Caution: Lift capacity rating is for the Telescoping Crane Jib only and does not reflect the actual lift capacity of the skid-steer loader which will vary by make and model. Also be aware that the farther out the load is moved, the more the capacity of the loader is reduced.

HEAVY DUTY TRAILER SPOTTER Model 155 for Skid-Steer Loaders Most small to medium size rental yards rent trailers and/or trailer mounted equipment but many do not keep a forklift on site to move the equipment around the yard. They do however, in most cases, have one or more skid-steer loaders which are ideal to move and position trailer mounted equipment when equipped with the new Star Trailer Spotter. The Trailer Spotter is fast and easy to install and fits most full size skid-steer loaders. Simply unhook from the bucket and hook onto the Trailer Spotter. The Trailer Spotter is designed to set upright so the operator never has to get off the loader. Shown with optional combo hitch adapter The Trailer Spotter is versatile - it incorporates a standard 2" square trailer hitch receiver - the same receiver that is on the back of most pickup trucks. This receiver accepts hitch adapters with balls, Pintle hitch or Combo (ball and pintle) hitch so it is simple to switch to whichever is needed to move most any trailer. The Trailer Spotter is also great for handling suspended loads. Simply run a chain or strap behind the ball or thru the Pintle hitch and you have a safe and secure way to pick up a troweling machine, water pump or most any small equipment that has a lifting point. Loader Attachments & Buckets The Trailer Spotter is also built strong to handle big loads and is built rugged to withstand heavy use, and sometimes even more importantly, resist damage. It is an attachment that can be kicked around your yard and will still outlast your skid-steer loader. Universal Skid-Steer Mounting Plate Fits All Modern Full Size Skid-Steers Standard 2" Square Trailer Hitch Receiver - for Optional Hitch Adapters see pg.23 Maximum Tongue Weight / Vertical Lift Capacity 2,000 lbs. Maximum Gross Towing Weight 10,000 lbs. Overall Length w/o Hitch Adapter - 29" w/ optional Combo Hitch Adapter - 39" approx. Overall Width - 45" Overall Height - 19.5" Empty Weight 165 lbs. Caution: Lift capacities of skid-steers vary with make and model. Be aware that the rated lift capacity of the Trailer Spotter does not reflect the actual lift capabilities of the skid-steer. Do not try to lift more than your skid-steer can safely handle. 4101 Garland Dr., Fort Worth, TX 76117 Ph. 817-485-6073 Fax 817-428-6008 4101 Garland Dr., Fort Worth, TX 76117 USA & Canada Toll Free Ph 817-485-6073 Fax 817-428-6008 800-541-1797 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - Bulletin: SSMNP 0807 43

ANGLE BROOM for Skid-Steer Loaders Hydraulically driven rotating Broom pushes dirt and debris away from loader. Designed for Heavy Duty Sweeping of dirt, dried mud, light snow, and other debris. Ideal for driveways, sidewalks, parking lots, loading dock, warehouses and more. Excellent for quick light snow removal without damage to the pavement surface. Features - One piece fast change Broom - No loss time installing multiple bristle wafers. - Bi-Directional, manually angles up to 30 degrees left or right of center. - Built-in Stand keeps Bristles off ground when stored and aids in changing Brooms. - Hoses kept together and protected from abrasion in Nylon Sleeve. - Flush Faced Hydraulic Quick Couplers included. - Direct Drive Motor - No chains or sprockets. - Loader Arms raise and lower broom. - Universal Skid-Steer Mounting Plate fits all modern full size Skid-Steers. Specifications MODEL 190M-72 MODEL 190M-84 Broom size 26" dia. x 72" long 26" dia. x 84" long Broom Type Optional Broom Poly Bristle With Integral Steel Core 50% Poly & 50% Steel Bristles Overall Length 87" 99" Overall Height 30" 30" Sweeping Width In Angle Position 63" 73" Weight 750 lbs. 850 lbs. Hydraulic Drive Hydraulic Flow Range Maximum Hydraulic Pressure Minimum Hydraulic Requirements Reversible Parker Motor 12 to 28 gpm 3000 PSI 12 gpm @ 2000 psi

Mad Beaver BRUSH CUTTER Open Front Three Blade Rotary Cutter Clears Trees, Brush & Grass down to Ground Level Break New Trails, clear unwanted brush Clear Overgrown Ditches, Lots & other Overgrown Sites Mulch Unwanted Brush Features - Cuts moving forward or reverse. - Three long life reversible Cutting Blades constructed of AR400 abrasion resistant plate. - Flush Faced Couplers and Hyd. Hoses included. Hoses protected in Nylon Sleeve. - Direct Drive Heavy Duty Gear Box. - Heavy Duty Greaseable Bearings for long bearing life. - Loader Arms raise and lower Brush Cutter. - Universal Skid-Steer Mounting Plate fits all modern full size Skid-Steers (Optional Forklift Quick-Tach available). - Raised front, funnels Brush to Cutters - Heavy Duty Push Bar aids in pushing over saplings & small trees. Special Safety Feature Rotary cutter is equipped with a hydraulic motor cushion valve for shut down of the blade system. This feature lessens the SPECIFICATIONS chance of damaging the cutter s hydraulic system or blade Heavy Duty Design - Cuts up to 5" dia. trees system when cutting larger diameter vegetation. Hyd. Drive - Parker Motor with Omni Gearbox Hydraulic Flow Range - Models to accomodate 11 to 45 GPM Maximum Hydraulic Pressure - 3500 PSI Minimum Hydraulic requirements - 11 GPM @ 2000 PSI Deck and Side Rails constructed of 3 / 16 " Plate Hoist & Haul Note: Full Front Door Required for Safety on Skid-Steer Star PC Door Kits, available for most all skid-steers MODEL 194-SD Motor Flow Width of Cut Overall Width Overall Height Weight 194-60 Low (11-20 GPM) 60" 69" 25" 1,300 lbs. 194MF-60 Medium (19-31 GPM) 60" 69" 25" 1,300 lbs. 194HF-60 High (28-45 GPM) 60" 69" 25" 1,300 lbs. 194-72 Low (11-20 GPM) 72" 81" 25" 1,450 lbs. 194MF-72 Medium (19-31 GPM) 72" 81" 25" 1,450 lbs. 194HF-72 High (28-45 GPM) 72" 81" 25" 1,450 lbs. 3/8" Poly Carbonate Shatter Proof Cab Door *Specify Skid-Steer Make & Model 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 45

Over-The-Bucket Forks Extra Heavy-Duty Add the convenience of a forklift to your loader Take Forks ON & OFF without leaving the operator s seat. Roll bucket forward Engage free-standing forks with brackets Roll bucket back to level forks D on t buy a light-duty set of forks and bend them in the first month of use. Star Over-the-Bucket Forks are built stronger to last. Take a look at our specs and don t accept anything less. FULLY FORGED FORKS JUST LIKE THE ONES ON YOUR FORKLIFT (these are not forks built from two pieces of steel welded together that require a gusset to keep them from coming apart). BIG 2" DIAMETER SOLID STEEL SHAFT 80" long. Same size shaft as used on 6,000 and 8,000 lb forklifts. Bucket opening HEAVY DUTY ¾" PLATE STEEL BRACKETS Brackets are built from thicker plate so only 3 are required (more than 3 restricts side to side adjustment of forks). Forks, shaft & brackets sold separately. Shaft, brackets & forks SOLD SEPARATELY. We guarantee you will be pleased with these forks. MODEL (Shaft only) LBA170-02 MODEL (Brack ets only) LBA170B MODEL (Fork s only) * * Description 2" dia. by 80" long sold steel shaft with retainers Description Set of 3 (¾" plate steel, weld-on) Brackets Fits Vertical Bkt Openings Fork Description Rated Capacity * Please specify exact measurement Dealer: of vertical bucket opening. Weight 70 lbs. Weight 40 lbs. Weight LBA170 up to 42" (set of 2) 1½" x 4" x 42" 5,500 lbs. 325 lbs. LBA180 up to 54" (set of 2) 1¾" x 4" x 48" 6,900 lbs. 408 lbs.

CRANE FORKS Self Shifting (spring loaded) Pickup Trolley Keeps forks level even when empty Maintains payload center of gravity to keep load level Design Features King post adjusts for load heights from 48" to 68" Adjustable stop permits use of 36", 40" & 48" pallets Backstop helps stabilize load - 40" wide Forks spread up 40" wide (out to out) SIMPLE DESIGN NO CABLES OR PULLEYS Model 660 Frame shown with Model 660-01 General Purpose Tines Model 660 Frame shown with Model 660-03 Brick Tines Tines available in 3 styles Crane Fork FRAME w/backstop Model 660 Frame only - Select Tines below. General Purpose Tines Model 660-01 These forks are the best choice for handling a wide variety of materials. The 46" long forks are ideal for standard 48" pallets. Block Tines Model 660-02 These forks can be used with other materials including brick (just slide the forks together), but are especially adapted for use with cubed or banded block. Brick Tines Model 660-03 These forks can be used with other materials but are especially adapted for use with banded brick. The 3" wide by 1½" thick forks make it easy to get into the small openings in the brick package. The 39" length keeps the forks from extending through one standard 40" brick package and into the next when packages are stacked close together. FRAME NOT SOLD WITHOUT SET OF TINES. MODEL (Frame only) Model 660 Frame shown with Model 660-02 Block Tines General Specifications Built-in handles on vertical post provide convenient grip for guiding forks into load. Pickup Trolley accommodates up to a 5 ton hook. All forks are forged and tapered. Load is carried with fork tips slightly tilted up to prevent load from sliding off. Spring helps return trolley to empty position when load is released. A minimum load of 500 to 750 lbs. is required for proper trolly operation. Caution: Never unload from a suspended pallet. Description Weight 660 King Post Frame with backstop 300 lbs. MODEL (Tines only) Description Capacity Weight 660-01 Gen. Purpose - set of 2 (1½" x 4" x 46") Forged Forks 6,000 lbs. 188 lbs. 660-02 Block - set of 6 (1½" x 2" x 47") Forged Forks 6,000 lbs. 258 lbs. 660-03 Brick - set of 2 (1½" x 3" x 39") Forged Forks 4,500 lbs. 110 lbs. Hoist & Haul 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Dealer: Operating Manual/Safety Information Available online - 47

NEW CRANE LIFT BOX CONVENIENT AND SAFE LIFT SUPPLIES, MATERIALS, & SMALL EQUIPMENT TO ELEVATED DECKS, ROOFS OR BELOW GROUND LEVEL Model 1454 Crane Lifting Eyes provide a safe 4-point pick up (Rigging NIC). Fork Pockets allow for easy handling with a forklift. Engineered to carry up to 4,000 lbs. Strong 10 Gauge Steel Shell Tub is heavily reinforced with ¼" Angle. Rugged Heavy Duty Construction for Long Term Durability on the Jobsite. Tub 4 ft. x 4 ft. x 2 ft. high Specifications Overall Length 57", Overall Width 51", Overall Height 27 3 /8" Capacity: Over 1 cubic yard (32 cuft.) Maximum Load Capacity: 4,000 lbs. Fork Pocket ID: 3 1 /8" high x 8 1 /4" wide, Spaced 31.5" on center Empty Weight: 455 lbs.

CRANE TRASH SKIP IDEAL FOR REMOVING TEAR-OFF OR OTHER CONSTRUCTION REFUSE FROM ROOFS AND ELEVATED DECKS. Model 1450 This rugged Heavy Duty Trash Skip with large lifting eyes has plenty of capacity to handle most any kind of trash or bulk material. It is designed to be hoisted with a set of 10 ft. or longer cable or strap slings. The sloped end makes it safe and easy to discharge the load. It is constructed of heavy steel and reinforced at all stress points to ensure long useful life. Heavy 3/16" steel plate liner Strong 1/4" angle reinforces top edge and corners Rugged channel reinforces sides and bottom Hoist & Haul To dump the skip, the two forward slings are disconnected from the lifting eyes with the lifting line slack. The skip is then lifted with the rear slings still connected, effectively dumping the load from the sloped end. MODEL Dimensions Capacity Weight NEW 1446 4' wide x 6' long x 2' high 6,000 lbs. 1.5 cuyd 780 lbs. 1448 4' wide x 8' long x 2' high 9,000 lbs. 2.0 cuyd 890 lbs. 1450 4' wide x 10' long x 2' high 12,000 lbs. 2.6 cuyd 1,100 lbs. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 49

LOAD-N-HAUL Vehicle Hitch Attachment One person can quickly and easily load, haul and unload... - Rental Equipment - Job Equipment - Landscape Equipment No more problems with space or ruining the interior of your vehicle. Load-N-Haul attaches easily to a standard 2" receiver. Model 1399 Big 32" x 50" platform. Inexpensive rental aid. All steel construction. Load capacity - 350 lbs. Empty weight - 171 lbs. Handling Dolly for easy one person installation. Ramp slides under platform and locks in place. See demonstration video at 1 2 3 One person can easily install the Load-N-Haul and load equipment.

Model 203B Deluxe Rough Terrain Brick & Block Cart BRICK/BL K/BLOC OCK CAR ARTS, MASONRY STANDS, and SCAFFOLD Brick & Block Carts Your company name added at no additional cost with quantity order of 3 or more Tilt Cap. - 1,000 lbs. Two pair 15" forks & one pair 8" forks Accommodates any banded block or brick package More fork adjustment holes to accommodate banded block packages 4 ply wide high-float tires Heavy Duty 1" dia. axle with 3" roller bearings Spring loaded positioning wheels Overall width 29" Weight 140 lbs. Model 202B (shown) Rough Terrain Brick Cart Tilt Cap. - 600 lbs. One pair 8" forks Accommodates any banded brick package 4 ply wide high-float tires Heavy Duty 1" dia. axle w/ 3" roller bearings Overall width 29" Weight 115 lbs. Veneer Scaffold Adjustable 2 Level Scaffold Masonry Stands Increase masons production Reduce labor cost on... Residential Light commercial Load Bearing Walls Interior Partitions Any wall up to 9' high Model 401-03 FRAME only Model 401-01 LEG w/pin (1 frame, 2 legs + 2 pig-tail pins = complete unit) Strong but light weight - only 35 lbs. Sets up fast no braces needed Legs adjust for unlevel ground conditions Mason s platform adjusts from 26" to 50" high Overall width 47½" Masonry Equipment Model 301 20" Mortar Board Stand 1" square tubular steel Welded steel tab eliminates chains Folds flat for storage & handling Weight 11 lbs. Masonry Stands Model 302 30" Plaster & Masonry Stand Use upright for 30" high stand or turn on side for 20" height All ends capped to keep out dirt & mortar No chain to clog Folds flat for storage & handling Weight 16 lbs. 4101 Garland Dr., Fort Worth, TX 76117 Ph 817-485-6073 Fax 817-428-6008 USA & Canada Toll Free 800-541-1797 Operating Manual/Safety Information Available online - 51

MORTAR TUBS / BUGGIES and CONCRETE RAKES Mortar Tubs Heavy Duty Forklift Mortar Tubs Durable 10 guage steel Continuous welded seams Reinforced corners One end sloped for easy shoveling Model 102 M ODEL Dimensions Capacity Weight 102 24"W x 22"H x 48"L 10 cuft. 155 lbs. 103 24"W x 22"H x 32"L 6 cuft. 121 lbs. Mortar Buggies Heavy Duty Forklift Mortar Buggies Durable 10 gauge steel construction Bolted-On heavy duty casters 2" x 8" high strength poly wheels Top edge of tub channel formed for strength Big 1 5 / 16 " dia. tubular steel handle Both ends sloped for easy shoveling Wheel brakes optional M ODEL Dimensions Capacity Weight 105 23½"W x 28"H x 50½"L 6 cuft. 165 lbs. 106 23½"W x 31"H x 54" L 10 cuft. 200 lbs. Concrete Rakes Contoured fired ash handle 5" x 20" 14 gauge steel blade MODEL Length of Handle Weight 960 60" handle 5½ lbs. 961 48" handle 5 lbs. 51