Elta Select Product Guide 2016

Elta Select Guide 2016 Tel: +44 (0) 1384 275800 Fax: +44 (0) 1384 275810 Email: bs@eltafans.co.uk visit: eltaselect.com

Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this All rights over material in this product guide are specifically owned by and reserved to Elta Fans Ltd, unless otherwise stated. Please seek permission before duplicating material which will constitute a breach of copyright and/or design right.

The Elta Select range represents the very best in Fans, Ventilation and Accessories. The new Elta Select Guide reflects a product range designed around customers needs by providing the best available technology. Browse through our comprehensive guide, full of new features and products and select from a range of products that you can be assured comply with the latest industry standards and regulations. The range is supplied in conjunction with a customer service approach that epitomises the very essence of what the Elta Select brand represents...integrity in everything we do. The Elta Select Guide allows you to select your fans responsibly.

WHAT IS ELTA SELECT? What to expect from our Select Range The Elta Select Guide reflects the continuing development of our high quality range of industrial & commercial fans and ventilation products for the building services market, which was originally launched in September 1999. Within it, you will see: ü All of our stocked range products ü Every product group features: - Quick Facts - Overview - Specification - Typical Applications - Key Performance Data - Dimensional Drawings - Accessories - Notes Section More detailed information for every product, such as full performance data, Specific Fan Power and sound and/or silencer data, can be found on eltaselect.com It s not just about products, you will also find information about the following: ü Indoor Air Quality ü Legislation ü Destratification ü Smoke and Car Park Ventilation ü Residential s ü Heat Recovery Units Plus more information on: ü Our fan selection software The fact is, choosing the right fan manufacturer for your requirements is an important decision. Which is why we thought a few facts about Elta Fans and the Select Range might help with that decision... It s not just about being one of the widest standard ranges of H&V products on the market today. Nor is it our extensive distributor network - We have over 90 distributors in the UK and in 36 countries across 5 continents. Nor is it the people Elta Fans attracts some of the most talented and experienced professionals in the H&V industry, providing excellence in technical support and a level of customer service that is the envy of many. Nor is it the depth of stock of standard products we carry, or the flexibility to respond quickly to more specialist product requirements. It is knowing that our customers come back to us time and time again. The product guide is divided up into categories, so you can quickly find the type of product you are looking for. Our products include: ü Window/Wall fans ü Ducted/Inline fans ü Roof fans and cowls ü High Temperature fans ü Hazardous Area fans ü Destratification fans ü Portable Cooling fans ü A wide range of accessories and controls, including: - Inverter Controllers - Electrical Accessories - Voltage Controllers - Auto Changeover Controllers 4 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

WHAT IS ELTA SELECT? What to expect from our Select Range We hold over 4m of stock in central England All of our stocked products are available for next day delivery Specialist carriage outside of normal hours is available on request Our engineers have over 200 years of combined experience 90 carefully chosen distributors in the UK, find your nearest at eltaselect.com Available worldwide in 36 countries across 5 continents Search our dedicated website any time Our friendly sales team are here to offer advice & technical support Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 5

INDOOR AIR QUALITY The reason for ventilation The rapid growth of industry and population density over the last century has led to wider use of man-made materials and a lack of fresh air for building occupants. This in turn has caused an increase in the incidence of allergies, asthma and eczema, correlating closely to the changes in the world around us. In 2007 the European Council adopted ambitious energy and climate change objectives for 2020 to reduce greenhouse gas emissions by 20%, rising to 30% if the conditions are right, to increase the share of renewable energy to 20% and to make a 20% improvement in energy efficiency.* In order to save energy, buildings are becoming increasingly more airtight. This can lead to an adverse affect on the health of occupants, with the average person spending 90% of their time indoors, as they are exposed to the chemicals from modern building fabrics and furnishings with no ventilation to filter them. Particularly vulnerable are the young, the old and people with existing respiratory and health problems. "With the average person spending 90% of their time indoors, ventilation is critical in order to prevent adverse health consequences" Inadequate ventilation leads to poor air quality causing occupant discomfort, health problems and damage to the building fabric. *Source: Energy 2020 - A strategy for competitive, sustainable and secure energy. Publications Office of the European Union, 2011. 6 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

INDOOR AIR QUALITY The reason for ventilation Common factors affecting IAQ Advantages of good IAQ CHEMICALS AND VOLATILE ORGANIC COMPOUNDS Chemicals and VOCs are found in furnishings, man-made materials, adhesives, cleaners, pesticides and household products. Harmful effects vary from mild irritation to serious health problems dependent on the length of exposure and the chemical concentration levels. Greater insulation, less ventilation and a huge increase in new chemicals and products within new buildings, collectively induces chemical exposure and threats to health never previously experienced in human history.** CARBON MONOXIDE Carbon monoxide results from smoking and the use of combustion appliances. Carbon monoxide poisoning causes headaches, nausea, vomiting and fatigue. Exposure to an atmosphere containing 1% carbon monoxide for five minutes will result in losing consciousness followed by death. PARTICULATES Small particles from smoke, tobacco smoke, fibres, dust and spores can cause problems varying from allergies to cancer. HUMIDITY FROM COOKING, WASHING AND PERSPIRING Condensed moisture damages the building fabric and when combined with warmth, provides ideal conditions for mould growth and for dust mites to flourish. Dust mites, which can be found in bedding and carpets, can cause asthma and allergic skin reactions. MOULD SPORES Mould spores are present in the form of dust and trigger asthma, allergies and hay fever when inhaled. CARBON DIOXIDE & ODOURS Carbon dioxide is a product of human respiration and combustion. Increased carbon dioxide levels lead to a lack of concentration, drowsiness and to occupants feeling uncomfortable. Increased CO² levels are considered to be a reliable indicator that the ventilation rate has dropped below acceptable levels and that the levels of occupancy related contaminants are increasing. Increased CO² levels are particularly relevant for students and office and factory workers as they can cause reduced concentration and productivity. TEMPERATURE Concentration levels decrease rapidly once temperatures exceed 24 C, which results in reduced productivity for workers and an increase in accident rates. VENTILATION Well designed, installed and maintained ventilation systems delivering sufficient levels of fresh air and extracting the stale contaminated air will ensure that adequate levels of indoor air quality can be maintained. It is essential to ensure that regular maintenance and cleaning of the HEVAC systems including the air filters is carried out. Apart from the obvious health benefits, a well ventilated building will result in: ü Happier and more motivated occupants In the workplace this will lead to: ü Higher productivity levels ü Lower levels of absenteeism ü A more stable workforce Solutions from Elta Fans Elta Fans produce a range of fans, air handling units, controls and ancillary equipment to facilitate the provision of clean, fresh and tempered air, providing a comprehensive range of industrial, commercial and domestic ventilation products directly from stock, as well as larger standard and specialist products ranging from ATEX requirements to car park ventilation and emergency smoke extract applications. To find out more, visit eltafans.com **Source: The Green Building Debate. LEED. CERTIFICATION. Where Energy Efficiency Collides with Human Health. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 7

PRODUCT INDEX Window/ Wall 15 Compact SCP Axial Up to 5.61 m³/s 21 30 Raptor SPA Axial Up to 6.27 m³/s Window/Wall SAX Centrifugal Up to 0.53 m³/s Ducted/ Inline 37 42 51 Compact SCD Axial Up to 4.24 m³/s Raptor SDA Axial Up to 4.60 m³/s Viper SCC Centrifugal Up to 1.73 m³/s 79 85 89 Jetflow HIT Centrifugal Up to 0.51 m³/s ISEO IMF Mixed Flow Up to 0.26 m³/s Mulitflow SEM Mixed Flow Up to 0.92 m³/s 121 125 QUBe SQU Centrifugal Up to 3.9 m³/s Multiflow SMB Mixed Flow Up to 2.87 m³/s 131 Twinflow STD Centrifugal Up to 1.89 m³/s 8 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

PRODUCT INDEX 58 67 71 75 Revolution SLC Axial Up to 19.63 m³/s Compact PowerPlus SCPP Axial Up to 4.6 m³/s PowerPlus SPP Axial Up to 3.96 m³/s Miniflow SAMF Axial Up to 0.55 m³/s 94 Multiflow SEL Mixed Flow Up to 3.89 m³/s 99 105 113 Hideaway SH Centrifugal Up to 0.37 m³/s Singleflow SSD Centrifugal Up to 1.87 m³/s Quietflow SQS Centrifugal Up to 1.87 m³/s 137 144 144 Quietflow SQT Centrifugal Up to 1.82 m³/s Quietflow SQS DCV Centrifugal Up to 1.87 m³/s Quietflow SQT DCV Centrifugal Up to 1.82 m³/s Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 9

Index Roof 147 151 155 Heritage SCH Roof Up to 1.87 m3/s Heritage SCHT Roof Up to 4.17 m³/s Singleflow SSDR Roof Up to 1.72 m³/s 173 Skyflow SSR Roof Up to 30 roof pitch 177 Skyflow SSFV Roof Up to 30 roof pitch High Temperature 183 187 191 Biflow SB (CYL) Bifurcated Up to 4.50 m3/s Biflow SB (CON) Bifurcated Up to 3.80 m3/s QUBE SQU-HT(s) Centrifugal Up to 3.90 m3/s Destratification 215 Portable 223 ZOO Fan SDF Destratification Up to 0.66 m3/s Cooling Raptor Cooler SRC Circulating Up to 1.82 m3/s 10 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Index 161 169 169 Twinflow STDR Roof Up to 1.65 m³/s Singleflow SSDR DCV Roof Up to 1.72 m³/s Twinflow STDR DCV Roof Up to 1.65 m³/s 170 Miniflow SMF Roof Up to 30 roof pitch 196 Hazardous 203 208 Slim QUBE SSQU-HT Centrifugal Up to 5.22 m3/s Area Revolution SLCX ATEX Up to 6.80 m3/s Raptor SFB ATEX Up to 2.57 m3/s Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 11

THE ERP DIRECTIVE Legislation and Key Points Regulations have been introduced under the Energy Related s (ErP) Directive in order to assist the Kyoto Protocol obligation to safeguard the environment in which we live, by increasing the total share of renewable energy in the EU to 20% by 2020, whilst increasing energy efficiency by 20%. Fans Regulation 327/2011 The Directive has set out minimum efficiency levels for fans, which includes all the principal fan types between 125W and 500kW input power. Where fans do not comply with the efficiency guidelines they will not be permitted to be marketed throughout Europe after these dates. A fan is considered as an axial or centrifugal fan only equipped with a housing which is a casing around the impeller that guides the gas stream towards, through and from the impeller. Examples of 327/2011 compliant fans Maximum flowrate 250 m³/h RVU 250 m³/h < maximum flowrate < 1000 m³/h RVU (if the manufacturer declares the ventilation units intended use as being exclusively for a residential ventilation application) NRVU (if the manufacturer does not declare the ventilation units intended use as being exclusively for a residential ventilation application) Maximum flowrate 1000 m³/h NRVU Regulation 1254/2014 sets out the labelling requirements for Residential s (RVU) and data that must be freely available regarding the product. Motors Regulation 640/2009 (and EU 4/2014) requires that motors with a rated output of 7.5 375 kw must meet EITHER the IE3 efficiency level (driven direct online) OR the IE2 level if fitted with a variable speed drive. Ventilation Units Regulation 1253/2014 and 1254/2014 Regulation 1253/2014 has set out minimum efficiency levels for Ventilation Units where the electric power input is greater than 30W. Ventilation units are by definition equipped with a casing which is additional to the housing (327/2011) and implies the casing is defined as all parts of the ventilation unit additional to the housing that interfere with the airflow. s that would normally be called box-fans or roof-fans are ventilation units. These products must also be multi speed, used with a variable speed drive or EC (Electronic commutated), which can be considered as a variable speed drive The regulation also categorises product as either Residential (RVU) or Non-Residential (NRVU), there are also further definitions that can be obtained by referring to the regulation. By defining the product as either RVU or NRVU sets out the efficiency requirements that have to be met. What it means to you It is only possible for a fan manufacturer to CE mark a product and sell that product into the EU if it meets the requirements of the ErP Directive and regulation that categorises that product. In essence by purchasing from a reputable manufacturer that CE marks their product you have no concerns. It does mean that product is changing, new technologies are more prevalent such as EC, the wider use of Variable Speed Drives as examples. Also old technologies and product that is not efficient are being removed, this leads to better system designs and product selections that need to be made. What is next? Year Affects Regulation Comment 2017 Motors 640/2009 2018 Ventilation Units 1253/2014 2018 Ventilation Units 1254/2014 0.75kW to 375kW motors either IE3 or IE2 + VSD Tighter efficiency requirements Removal of lowest energy classes on RVU Labels 12 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Window/Wall Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 13

14 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

COMPACT SCP Plate Mounted Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 10 standard sizes from 250mm to 800mm. ü Air volume flow rates up to 5.61 m³/s. ü Static pressures up to 234 Pa. ü Highly efficient, lightweight induction motors. ü Available in AC. Fully speed controllable. CASING The all metal fan casing and guard provide a long lasting and robust construction. The units have been constructed from mild steel and suitably treated to ensure full corrosion protection. The guard shall be bright zinc plated. Fan plates and motors shall have a powder coated polyester epoxy paint finish in pastel beige (RAL 7032). IMPELLER Adjustable pitch aerofoil impellers are provided with blades made from high quality GRP. Impellers are factory set at an angle to provide maximum performance. The hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are to be dynamically balanced to ISO 14694 Grade G6.3. MOTORS Three phase multi-voltage motors are wound for either (Delta) 230V/3Ph/50Hz or (Star) 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls. Fans are suitable for operating temperatures between -20 C and +70 C fixed speed and -20 C and +50 C when used with a speed controller. Electrical connection to the motor shall be provided by an IP55 terminal box fitted to a 550mm long flying lead. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCP units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Factories Sports Halls Shops Industrial Units Warehousing Schools Kitchens ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-EL, 149-POT Transformer Controller : 149-TC Inverter : 149-ODE Louvre Shutter : 064 Impeller Side Guard : 078C Wall Cowl : SWC Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 15

COMPACT SCP Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SCP250/4-1AC 1445 SCP315/4-1AC 1370 SCP350/4-1AC 1360 SCP500/4-1AC 1300 SCP560/4-1AC 1315 SCP630/4-1AC 1295 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.265 0.239 0.186 Inlet 42 12 <125W 0.38 0.080 W/(L/s) 0.28 0.32 0.42 Outlet 42 m³/s 0.557 0.514 0.435 0.355 Inlet 50 22.7 <125W 0.56 0.120 W/(L/s) 0.20 0.22 0.26 0.34 Outlet 49 m³/s 0.679 0.602 0.523 0.411 Inlet 50 25.6 <125W 0.65 0.120 W/(L/s) 0.15 0.19 0.23 0.30 Outlet 50 m³/s 1.881 1.783 1.638 1.474 1.267 Inlet 58 31.2 40 1.82 0.411 W/(L/s) 0.19 0.21 0.24 0.28 0.32 Outlet 57 m³/s 3.349 3.198 3.029 2.840 2.625 2.080 Inlet 58 34.4 41 4.90 0.920 W/(L/s) 0.26 0.28 0.30 0.32 0.35 0.44 Outlet 62 m³/s 4.776 4.586 4.376 4.150 3.903 3.289 Inlet 63 34.8 40 6.50 1.446 W/(L/s) 0.29 0.31 0.33 0.35 0.38 0.45 Outlet 65 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 16 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

COMPACT SCP Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SCP250/4-3AC 1460 SCP315/4-3AC 1445 SCP350/4-3AC 1440 SCP400/4-3AC 1400 SCP450/4-3AC 1390 SCP450/4B-3AC 1375 SCP500/4-3AC 1405 SCP500/6-3AC 930 SCP560/4-3AC 1410 SCP560/6-3AC 880 SCP630/4-3AC 1420 SCP630/6-3AC 915 SCP710/4/6-3AC SCP710/6/8-3AC SCP800/6/8-3AC 1346 1114 900 740 885 705 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 Overall Efficiency % FMEG N Peak Amps Motor Electrical Data Input kw / Y dba @ 3m m³/s 0.330 0.273 0.221 Inlet 42 12.6 <125W 0.32 0.090 Mains W/(L/s) 0.26 0.32 0.40 Outlet 42 m³/s 0.515 0.491 0.426 0.355 Inlet 50 21.9 <125W 0.34 0.120 Mains W/(L/s) 0.21 0.23 0.28 0.35 Outlet 49 m³/s 0.616 0.570 0.515 0.407 0.243 Inlet 50 25.8 <125W 0.34 0.120 Mains W/(L/s) 0.16 0.19 0.23 0.30 0.49 Outlet 50 m³/s 1.455 1.375 1.268 1.133 0.988 Inlet 51 31.5 40 0.68 0.328 Mains W/(L/s) 0.21 0.23 0.25 0.29 0.34 Outlet 55 m³/s 1.455 1.375 1.268 1.133 0.988 Inlet 53 32.6 41 0.68 0.380 Mains W/(L/s) 0.21 0.23 0.25 0.29 0.34 Outlet 58 m³/s 2.081 1.976 1.863 1.712 1.535 Inlet 53 33.3 41 0.96 0.519 Mains W/(L/s) 0.24 0.25 0.27 0.30 0.34 Outlet 58 m³/s 2.639 2.525 2.394 2.245 2.075 1.646 Inlet 57 34.5 41 1.35 0.730 Mains W/(L/s) 0.26 0.27 0.29 0.32 0.35 0.44 Outlet 61 m³/s 1.518 1.339 1.102 Inlet 50 29.3 40 0.94 0.200 Mains W/(L/s) 0.12 0.27 0.29 Outlet 52 m³/s 3.322 3.185 3.029 2.851 2.412 Inlet 60 38.9 45 1.90 0.970 Mains W/(L/s) 0.27 0.29 0.31 0.33 0.40 Outlet 64 m³/s 2.162 1.924 1.616 1.159 Inlet 54 30.7 40 0.94 0.290 Mains W/(L/s) 0.12 0.15 0.18 0.25 Outlet 56 m³/s 4.590 4.437 4.271 4.096 3.914 3.502 2.881 Inlet 65 42.5 48 2.70 1.370 Mains W/(L/s) 0.26 0.28 0.30 0.32 0.34 0.39 0.47 Outlet 67 m³/s 3.399 3.185 2.958 2.672 2.273 Inlet 55 32.7 40 2.00 0.710 Mains W/(L/s) 0.19 0.21 0.23 0.27 0.31 Outlet 57 m³/s 4.978 4.799 4.610 4.408 4.187 3.626 2.185 35.4 3.68 1.583 Inlet 62 W/(L/s) 0.28 0.30 0.32 0.35 0.37 0.44 0.67 Outlet 67 40 m³/s 4.277 4.022 3.730 3.384 2.956 1.591 Inlet 67-1.96 1.086 Y W/(L/s) 0.24 0.26 0.29 0.32 0.37 0.67 Outlet 58 m³/s 4.179 3.949 3.682 3.360 2.943 33.8 2.35 0.890 Inlet 56 W/(L/s) 0.18 0.21 0.23 0.26 0.30 40 Outlet 58 m³/s 3.551 3.203 2.788 2.232 Inlet 52 28.0 1.28 0.600 Y W/(L/s) 0.15 0.18 0.21 0.27 Outlet 54 m³/s 5.611 5.199 4.719 4.154 34.2 2.35 0.990 Inlet 60 W/(L/s) 0.17 0.19 0.21 0.24 Outlet 63 40 m³/s 4.535 3.922 3.199 Inlet 51 14.5 0.64 1.170 Y W/(L/s) 0.25 0.30 0.37 Outlet 53 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 17

COMPACT SCP Dimensional Data D E CTS 4-HOLES 10 DIA 550mm LENGTH OF 20mm FLEXIBLE CONDUIT COMPLETE WITH TERMINAL BOX MOUNTING FACE A B C F H G A B C D E F G H Weight kg 1PH SCP250/4-1AC 250 261 275 370 320 95 75 15 5 - SCP250/4-3AC 250 261 275 370 320 95 75 15-7 SCP315/4-1AC 315 326 360 430 380 104 75 15 6 - SCP315/4-3AC 315 326 360 430 380 104 75 15-7 SCP350/4-1AC 350 361 395 485 435 95 75 15 6 - SCP350/4-3AC 350 361 395 485 435 95 75 15-8 SCP400/4-3AC 400 411 450 540 490 97 95 15-13 SCP450/4-3AC 450 461 500 575 535 95 95 15-14 SCP450/4B-3AC 450 461 500 575 535 95 90 15-14 SCP500/4-1AC 500 512 560 655 615 89 90 15 16 - SCP500/4-3AC 500 512 560 655 615 147 100 15-20 SCP500/6-3AC 500 512 560 655 615 147 100 15-20 SCP560/4-1AC 560 577 620 725 670 149 100 20 24 - SCP560/4-3AC 560 577 620 725 670 149 100 20-24 SCP560/6-3AC 560 577 620 725 670 141 100 20-24 SCP630/4-1AC 630 647 700 805 750 141 105 20 24 - SCP630/4-3AC 630 647 700 805 750 141 105 20-30 SCP630/6-3AC 630 647 700 805 750 141 105 20-30 SCP710/4/6-3AC 710 725 765 850 810 143 103 27-30 SCP710/6/8-3AC 710 725 765 850 810 143 103 27-30 SCP800/6/8-3AC 800 817 880 973 910 146 105 28-36 Dimensions are in mm. 3PH 18 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

COMPACT SCP Accessories Electronic Controller Transformer Controller Louvre Shutter Impeller Side Guard Wall Cowl Wiring Diagram SCP250/4-1AC - - 064-0250-C 078-0250-C SWC25/31 152-500 SCP315/4-1AC - - 064-0315-C 078-0315-C SWC25/31 152-500 SCP350/4-1AC - - 064-0350-C 078-0350-C SWC35/40 152-500 SCP500/4-1AC 149-EL61TK 149-TC18 064-0500-C 078-0500-C SWC45/50 152-500 SCP560/4-1AC 149-EL61TK 149-TC18 064-0560-C 078-0560-C SWC56/63 152-500 SCP630/4-1AC - 149-TC35 064-0630-C 078-0630-C SWC56/63 152-500 Transformer Controller Inverter Controller 1PH-3PH IP66 Inverter Controller 1PH-3PH IP20 Inverter Controller 3PH-3PH IP66 Inverter Controller 3PH-3PH IP20 SCP250/4-3AC 149-TC33 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP315/4-3AC 149-TC33 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP350/4-3AC 149-TC33 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP400/4-3AC 149-TC33 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP450/4-3AC 149-TC33 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP450/4B-3AC 149-TC33 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP500/4-3AC 149-TC33 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP500/6-3AC 149-TC33 - - 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP560/4-3AC 149-TC35 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP560/6-3AC 149-TC35 - - 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP630/4-3AC 149-TC35 149-ODE-2-12075-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 SCP630/6-3AC 149-TC35 - - 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP710/4/6-3AC 149-TC35 - - 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 SCP710/6/8-3AC 149-TC35 - - 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCP800/6/8-3AC 149-TC35 - - 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 Louvre Shutter Impeller Side Guard Wall Cowl Wiring Diagram SCP250/4-3AC 064-0250-C 078-0250-C SWC25/31 152-611 SCP315/4-3AC 064-0315-C 078-0315-C SWC25/31 152-611 SCP350/4-3AC 064-0350-C 078-0350-C SWC35/40 152-611 SCP400/4-3AC 064-0400-C 078-0400-C SWC35/40 152-611 SCP450/4-3AC 064-0450-C 078-0450-C SWC45/50 152-611 SCP450/4B-3AC 064-0450-C 078-0450-C SWC45/50 152-611 SCP500/4-3AC 064-0500-C 078-0500-C SWC45/50 152-611 SCP500/6-3AC 064-0500-C 078-0500-C SWC45/50 152-608 SCP560/4-3AC 064-0560-C 078-0560-C SWC56/63 152-611 SCP560/6-3AC 064-0560-C 078-0560-C SWC56/63 152-608 SCP630/4-3AC 064-0630-C 078-0630-C SWC56/63 152-611 SCP630/6-3AC 064-0630-C 078-0630-C SWC56/63 152-608 SCP710/4/6-3AC 064-0710-C 078-0710-C - 152-614 SCP710/6/8-3AC 064-0710-C 078-0710-C - 152-614 SCP800/6/8-3AC 064-0800-C 078-0800-C - 152-614 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 19

COMPACT SCP Notes 20 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SPA Plate Mounted Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 9 standard sizes from 250mm to 710mm. ü Air volume flow rates up to 6.27 m³/s. ü Static pressures up to 298 Pa. ü Suitable for operating temperatures up to +70 C. ü Available in AC & EC. CASING The all metal fan casing and guard provide a long lasting and robust construction. The units have been constructed from mild steel and suitably treated to ensure full corrosion protection. The guard is powder coated polyester epoxy paint finish in black (RAL 9005). Fan plates are powder coated polyester epoxy paint finish in pastel beige (RAL 7032). IMPELLER Impellers are high quality Ziehl-Abegg Sickle Blade or FE2owlet in pressure die cast aluminium or high performance composite material providing enhanced aerodynamic properties, low noise and reliability, dynamically balanced to ISO 14694 Grade G6.3 and finished in black (RAL 9005). Ziehl-Abegg Sickle Blade and FE2owlet impellers provide significant noise reduction. MOTORS Motors are highly efficient, lightweight external rotor motors, insulated to Class F, with integral thermal overload protection. Sizes 250-350 weatherproofed to IP44 Sizes 400-710 weatherproofed to IP54. All fans are suitable for use with a speed controller. Electrical connection to the motor shall be provided by an IP55 terminal box fitted to a flying lead allowing the fan to be positioned conveniently to incoming electrical inputs. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SPA units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Sports Hall Squash Courts Schools & Colleges Shops Retail Parks Commercial Kitchens Factories Industrial Units Warehousing ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-EL Transformer Controller : 149-TC Louvre Shutter : 064 Wall Cowl : SWC Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 21

RAPTOR SPA Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SPA250/2-1AC 2119 SPA250/4-1AC 1368 SPA315/4-1AC 1320 SPA350/4-1AC 1286 SPA400/4-1AC 1372 SPA450/4-1AC 1323 SPA450/6-1AC 926 SPA500/4-1AC 1320 SPA500/6-1AC 918 SPA560/4-1AC 1350 SPA560/6-1AC 930 SPA630/6-1AC 892 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps SC Amps Input W dba @ 3m m³/s 0.440 0.404 0.365 0.322 0.274 Inlet 50 - <125W 0.57 0.84 0.1245 W/(L/s) 0.28 0.30 0.33 0.39 0.48 Outlet 50 m³/s 0.273 0.219 0.114 Inlet 37 - <125W 0.24 0.4 0.046 W/(L/s) 0.17 0.22 0.42 Outlet 37 m³/s 0.602 0.539 0.454 Inlet 44 - <125W 0.5 1 0.11 W/(L/s) 0.19 0.20 0.24 Outlet 45 m³/s 0.900 0.818 0.716 0.575 0.306 Inlet 40 - <125W 0.77 1.2 0.1245 W/(L/s) 0.15 0.17 0.21 0.29 0.57 Outlet 42 m³/s 1.093 1.018 0.929 0.820 0.669 Inlet 48 31.1 41.3 0.46 1.6 0.24 W/(L/s) 0.17 0.19 0.23 0.27 0.35 Outlet 48 m³/s 1.981 1.871 1.755 1.618 1.472 Inlet 49 34 41.8 2.45 6.3 0.545 W/(L/s) 0.24 0.27 0.29 0.33 0.37 Outlet 48 m³/s 1.342 1.177 0.968 Inlet 41 30 41 0.9 2.5 0.189 W/(L/s) 0.12 0.15 0.19 Outlet 41 m³/s 2.529 2.401 2.281 2.160 2.033 1.731 Inlet 51 32.9 40.3 4.679-0.72 W/(L/s) 0.36 0.38 0.41 0.43 0.46 0.56 Outlet 50 m³/s 1.761 1.574 1.352 1.043 Inlet 44 30.4 40.6 1.3 2.8 0.289 W/(L/s) 0.14 0.17 0.21 0.28 Outlet 44 m³/s 3.494 3.376 3.246 3.099 2.922 2.438 1.883 Inlet 63 35.8 41.8 5.1 11 1.15 W/(L/s) 0.31 0.32 0.34 0.37 0.39 0.48 0.63 Outlet 63 m³/s 2.217 1.995 1.779 1.572 1.330 Inlet 52 33 42 2.795 5.3 0.39 W/(L/s) 0.26 0.29 0.33 0.38 0.45 Outlet 52 m³/s 3.044 2.823 2.538 2.201 1.762 Inlet 49 32.2 40 3.1 5.3 0.66 W/(L/s) 0.17 0.19 0.23 0.28 0.37 Outlet 50 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Overall static efficiency, r/min and FMEG values are per ISO 12759 installation category A. Peak Amps @ 230V / 1Ph / 50Hz. 22 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SPA Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz SPA400/4/6-3AC SPA450/4/6-3AC SPA500/4/6-3AC SPA560/4/6-3AC SPA630/4/6-3AC SPA630/6/8-3AC SPA710/4/6-3AC SPA710/6/8-3AC Speed r/min 1372 1105 1354 1016 1342 960 1293 995 1327 919 903 725 1358 1091 899 676 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 Overall Efficiency % FMEG N Peak Amps Motor Electrical Data SC Amps Input kw / Y dba @ 3m m³/s 1.07 1.01 0.93 0.84 0.72 Inlet 48 32.4 0.46 1.60 0.227 W/(L/s) 0.16 0.18 0.22 0.26 0.32 Outlet 49 42.7 m³/s 0.94 0.83 0.69 Inlet 45-0.27 0.55 0.170 Y W/(L/s) 0.14 0.17 0.23 Outlet 46 m³/s 2.00 1.89 1.79 1.67 1.52 Inlet 50 34.0 1.08 3.80 0.538 W/(L/s) 0.22 0.25 0.27 0.30 0.34 Outlet 49 42 m³/s 1.62 1.45 1.26 0.99 Inlet 45-0.68 2.60 0.380 Y W/(L/s) 0.21 0.24 0.29 0.38 Outlet 45 m³/s 2.63 2.51 2.37 2.22 2.06 1.67 Inlet 53 34.2 1.46 4.70 0.764 W/(L/s) 0.23 0.26 0.29 0.32 0.36 0.48 Outlet 53 41.3 m³/s 2.08 1.85 1.57 1.23 Inlet 48-0.96 1.55 0.550 Y W/(L/s) 0.23 0.27 0.33 0.43 Outlet 47 m³/s 3.15 3.03 2.90 2.74 2.57 2.15 Inlet 57 33.7 2.40 7.00 1.169 W/(L/s) 0.24 0.26 0.29 0.32 0.36 0.46 Outlet 57 40.1 m³/s 2.48 2.24 1.97 1.64 0.99 Inlet 51-1.25 2.30 0.570 Y W/(L/s) 0.20 0.23 0.27 0.34 0.58 Outlet 51 m³/s 4.597 4.481 4.357 4.223 4.079 3.749 3.341 2.809 Inlet 67 40.7 3.43 21.00 1.812 W/(L/s) 0.33 0.35 0.37 0.39 0.41 0.46 0.53 0.64 Outlet 67 45.5 m³/s 3.819 3.637 3.434 3.208 2.955 2.344 Inlet 60-2.50 7.00 1.250 Y W/(L/s) 0.28 0.31 0.33 0.36 0.40 0.52 Outlet 60 m³/s 3.12 2.91 2.65 2.35 1.99 Inlet 50 33.8 1.26 4.90 0.62 W/(L/s) 0.14 0.17 0.20 0.24 0.30 Outlet 49 41.6 m³/s 2.70 2.39 1.95 1.30 Inlet 47-0.73 2.80 0.440 Y W/(L/s) 0.12 0.16 0.21 0.34 Outlet 45 m³/s 6.27 6.10 5.92 5.72 5.51 5.03 4.46 3.80 Inlet 60 37.9 4.88 21.00 2.573 W/(L/s) 0.30 0.33 0.35 0.38 0.41 0.47 0.56 0.68 Outlet 60 41.7 m³/s 5.27 5.02 4.72 4.37 3.99 3.10 Inlet 55-2.89 7.00 1.740 Y W/(L/s) 0.27 0.29 0.32 0.36 0.41 0.55 Outlet 55 m³/s 4.041 3.824 3.560 3.237 2.898 2.137 Inlet 49 38.2 1.72 5.80 0.861 W/(L/s) 0.14 0.16 0.19 0.24 0.28 0.43 Outlet 49 44.9 m³/s 3.509 3.089 2.589 1.968 Inlet 46-1.10 2.00 0.640 Y W/(L/s) 0.13 0.17 0.22 0.31 Outlet 45 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Overall static efficiency, r/min and FMEG values are per ISO 12759 installation category A. Peak Amps @ 400V / 3Ph / 50Hz. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 23

RAPTOR SPA Performance, SFP & Electrical Data SINGLE Phase - 220V to 277V / 50Hz or 60Hz SPA250/2-1EC SPA250/2B-1EC SPA315/4-1EC SPA350/4-1EC SPA350/6-1EC SPA400/4-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.423 0.383 0.341 0.295 0.251 Inlet 54-0.93 0.100 W/(L/s) 0.26 0.28 0.30 0.34 0.40 Outlet 53 m³/s 0.358 0.309 0.260 0.207 Inlet 47-0.60 - W/(L/s) 0.19 0.21 0.24 0.30 Outlet 47 <125W m³/s 0.227 0.146 Inlet 35-0.19 - W/(L/s) 0.09 0.12 Outlet 35 m³/s 0.086 Inlet *20-0.07 - W/(L/s) 0.05 Outlet *20 m³/s 0.559 0.528 0.496 0.463 0.429 0.356 0.274 Inlet 60 31.7 1.88 0.212 W/(L/s) 0.42 0.44 0.46 0.49 0.52 0.61 0.77 Outlet 60 m³/s 0.467 0.431 0.395 0.356 0.316 0.226 Inlet 54-1.13 - W/(L/s) 0.29 0.31 0.33 0.37 0.41 0.56 Outlet 53 42.2 m³/s 0.288 0.231 0.170 Inlet 43-0.33 - W/(L/s) 0.13 0.16 0.21 Outlet 43 m³/s 0.117 Inlet *20-0.08 - W/(L/s) 0.05 Outlet *20 m³/s 0.822 0.796 0.768 0.735 0.695 0.587 0.441 Inlet 58 41.4 1.61 0.321 W/(L/s) 0.35 0.37 0.40 0.42 0.45 0.54 0.79 Outlet 58 m³/s 0.665 0.630 0.588 0.535 0.471 Inlet 52-0.92 - W/(L/s) 0.24 0.26 0.29 0.32 0.37 Outlet 52 50.7 m³/s 0.396 0.323 Inlet 41-0.30 - W/(L/s) 0.12 0.15 Outlet 41 m³/s 0.130 Inlet *20-0.11 - W/(L/s) 0.08 Outlet *20 m³/s 1.247 1.201 1.156 1.108 1.053 Inlet 57 38.6 2.00 0.429 W/(L/s) 0.29 0.32 0.34 0.37 0.40 Outlet 57 m³/s 0.996 0.928 0.861 0.774 0.681 Inlet 52-1.12 - W/(L/s) 0.19 0.21 0.24 0.28 0.33 Outlet 52 47.2 m³/s 0.596 0.495 Inlet 40-0.34 - W/(L/s) 0.09 0.12 Outlet 41 m³/s 0.200 Inlet *20-0.11 - W/(L/s) 0.05 Outlet *20 m³/s 0.820 0.665 0.474 Inlet 43-1.06 0.110 W/(L/s) 0.15 0.18 0.24 Outlet 42 m³/s 0.696 0.514 Inlet 39-0.64 - W/(L/s) 0.11 0.13 Outlet 39 <125W m³/s 0.427 Inlet 27-0.20 - W/(L/s) 0.05 Outlet 27 m³/s 0.150 Inlet *20-0.08 - W/(L/s) 0.03 Outlet *20 m³/s 1.472 1.406 1.353 1.300 1.240 1.092 0.901 Inlet 58 49.5 2.50 0.490 W/(L/s) 0.26 0.29 0.31 0.34 0.37 0.46 0.60 Outlet 58 m³/s 1.161 1.090 1.014 0.925 0.809 Inlet 53-1.29 - W/(L/s) 0.17 0.20 0.23 0.26 0.31 Outlet 52 58.5 m³/s 0.695 0.563 0.364 Inlet 41-0.38 - W/(L/s) 0.08 0.11 0.19 Outlet 41 m³/s 0.213 Inlet *20-0.11 - W/(L/s) 0.03 Outlet *20 A variable speed drive is integrated within the fan. Data in accordance with ERP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. 24 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SPA Performance, SFP & Electrical Data SINGLE Phase - 220V to 277V / 50Hz or 60Hz SPA450/4-1EC SPA500/4-1EC SPA560/4-1EC SPA630/4-1EC SPA710/6-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 1.434 1.342 1.240 1.129 1.002 Inlet 54 41.0 1.65 0.300 W/(L/s) 0.16 0.19 0.22 0.26 0.31 Outlet 55 m³/s 1.121 0.998 0.854 0.672 Inlet 49-0.80 - W/(L/s) 0.10 0.13 0.17 0.24 Outlet 50 50.6 m³/s 0.671 0.436 Inlet 38-0.25 - W/(L/s) 0.05 0.10 Outlet 39 m³/s 0.222 Inlet 20-0.11 - W/(L/s) 0.04 Outlet 20 m³/s 2.321 2.226 2.114 2.012 1.919 1.719 Inlet 56 40.1 3.46 0.747 W/(L/s) 0.26 0.29 0.32 0.35 0.38 0.44 Outlet 56 m³/s 1.850 1.713 1.603 1.493 1.361 Inlet 51-1.90 - W/(L/s) 0.17 0.20 0.23 0.26 0.30 Outlet 51 46.9 m³/s 1.074 0.878 Inlet 40-0.49 - W/(L/s) 0.07 0.10 Outlet 40 m³/s 0.276 Inlet 20-0.23 - W/(L/s) 0.11 Outlet 20 m³/s 2.621 2.515 2.405 2.284 2.149 1.832 Inlet 53 41.6 3.76 0.772 W/(L/s) 0.24 0.26 0.28 0.31 0.33 0.41 Outlet 53 m³/s 2.077 1.940 1.796 1.631 1.422 Inlet 49-1.96-0.15 0.18 0.20 0.23 0.28 Outlet 48 48.6 m³/s 1.217 0.980 Inlet 38-0.52 - W/(L/s) 0.07 0.09 Outlet 38 m³/s 0.354 Inlet 20-0.31 - W/(L/s) 0.09 Outlet 20 m³/s 3.167 3.051 2.913 2.743 2.528 1.937 1.347 Inlet 53 46.3 4.09 0.772 W/(L/s) 0.19 0.21 0.23 0.25 0.29 0.41 0.63 Outlet 51 m³/s 2.547 2.370 2.169 1.913 1.543 Inlet 49-2.16 - W/(L/s) 0.12 0.14 0.17 0.21 0.27 Outlet 48 53.3 m³/s 1.530 1.164 0.508 Inlet 40-0.55 - W/(L/s) 0.05 0.08 0.22 Outlet 40 m³/s 0.496 Inlet 20-0.26 - W/(L/s) 0.23 Outlet 20 m³/s 3.640 3.361 3.047 2.687 2.268 1.214 Inlet 51 46.3 3.98 0.659 W/(L/s) 0.15 0.17 0.20 0.24 0.29 0.59 Outlet 51 m³/s 2.900 2.550 2.108 1.529 0.814 Inlet 46-2.09 - W/(L/s) 0.10 0.12 0.16 0.23 0.46 Outlet 46 53.8 m³/s 1.743 0.964 Inlet 33-0.55 - W/(L/s) 0.04 0.09 Outlet 33 m³/s 0.585 Inlet 20-0.23 - W/(L/s) 0.05 Outlet 20 A variable speed drive is integrated within the fan. Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 25

RAPTOR SPA Performance, SFP & Electrical Data THREE Phase - 380V to 480V / 50Hz or 60Hz SPA500/4-3EC SPA560/4-3EC SPA630/4-3EC SPA710/6-3EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 2.525 2.435 2.342 2.248 2.155 1.967 1.755 Inlet 58 41.8 1.57 0.948 W/(L/s) 0.31 0.33 0.36 0.38 0.41 0.56 0.54 Outlet 58 m³/s 2.019 1.896 1.776 1.678 1.569 Inlet 52-0.96 - W/(L/s) 0.20 0.22 0.26 0.29 0.32 Outlet 52 46.5 m³/s 1.184 0.998 Inlet 42-0.35 - W/(L/s) 0.08 0.11 Outlet 42 m³/s 0.341 Inlet *20-0.17 - W/(L/s) 0.02 Outlet *20 m³/s 2.855 2.764 2.668 2.566 2.457 2.206 1.858 Inlet 56 42.6 1.69 0.957 W/(L/s) 0.27 0.29 0.31 0.34 0.36 0.42 0.53 Outlet 56 m³/s 2.257 2.136 2.011 1.874 1.712 1.243 Inlet 50-1.00 - W/(L/s) 0.18 0.20 0.22 0.25 0.28 0.44 Outlet 50 49 m³/s 1.328 1.112 0.784 Inlet 41-0.37 - W/(L/s) 0.08 0.10 0.16 Outlet 42 m³/s 0.412 Inlet *20-0.17 - W/(L/s) 0.04 Outlet *20 m³/s 3.645 3.534 3.412 3.276 3.123 2.743 2.230 1.656 Inlet 56 48.5 2.03 1.100 W/(L/s) 0.24 0.25 0.28 0.30 0.33 0.40 0.52 0.74 Outlet 54 m³/s 2.939 2.786 2.614 2.416 2.181 1.546 0.716 Inlet 53-1.18 - W/(L/s) 0.16 0.18 0.20 0.23 0.27 0.41 0.96 Outlet 52 54.6 m³/s 1.751 1.483 0.970 Inlet 42-0.43 - W/(L/s) 0.07 0.09 0.15 Outlet 43 m³/s 0.662 Inlet *20-0.17 - W/(L/s) 0.03 Outlet *20 m³/s 3.897 3.660 3.388 3.073 2.697 1.723 0.687 Inlet 54 47.7 1.80 0.770 W/(L/s) 0.17 0.19 0.21 0.25 0.29 0.49 1.39 Outlet 54 m³/s 3.108 2.805 2.425 1.919 1.263 0.115 Inlet 48-1.05 - W/(L/s) 0.11 0.13 0.16 0.22 0.35 4.96 Outlet 48 54.8 m³/s 1.868 1.225 0.193 Inlet 35-0.40 - W/(L/s) 0.05 0.08 0.67 Outlet 36 m³/s 0.539 Inlet *20-0.17 - W/(L/s) 0.03 Outlet *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. 26 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SPA Dimensional Data 'D' 'E'CTRS FLYING LEAD COMPLETE WITH TERMINAL BOX 4-HOLES Ø'K' Ø 'A' Ø 'B' Ø 'C' 'F' 'H' 'G' 'J' A B C D E F G H J K Weight kg SPA250/2-1AC 254 257 276 370 320 43 48 6 24 7 5 SPA250/2-1EC 254 257 276 370 320 43 48 6 25 7 5 SPA250/2B-1EC 254 257 276 370 320 43 48 6 25 7 5 SPA250/4-1AC 254 257 276 370 320 43 48 6 19 7 5 SPA315/4-1AC 317 329 365 430 380 18 71 11 13 9 7 SPA315/4-1EC 317 329 365 430 380 72 71 11 4 9 9 SPA350/4-1AC 358 370 400 485 435 51 74 12 9 9 8 SPA350/4-1EC 358 370 400 485 435 79 74 12-3 9 9 SPA350/6-1EC 358 370 400 485 435 47 74 12 6 9 9 SPA400/4-1AC 400 412 450 540 490 56 95 15-10 10 SPA400/4-1EC 400 412 450 540 490 56 95 15-8 10 10 SPA400/46-3AC 400 412 450 540 490 56 95 15-10 9 SPA450/4-1AC 450 462 500 575 535 20 95 15 51 10 16 SPA450/4-1EC 450 462 500 575 535 56 95 15 4 10 10 SPA450/46-3AC 450 462 500 575 535 20 95 15 31 10 14 SPA450/6-1AC 450 462 500 575 535 20 95 15 31 10 14 SPA500/4-1AC 504 517 584 655 615 63 104 16 37 11 21 SPA500/4-1EC 504 517 584 655 615 88 104 16-9 11 17 SPA500/4-3EC 504 517 584 655 615 88 104 16-9 11 17 SPA500/46-3AC 504 517 584 655 615 63 104 16 38 11 21 SPA500/6-1AC 504 517 584 655 615 63 104 16 18 11 20 SPA560/4-1AC 560 577 620 725 670 60 100 15 66 10 28 SPA560/4-1EC 560 577 620 725 670 76 100 15 9 10 22 SPA560/4-3EC 560 577 620 725 670 76 100 15 9 10 22 SPA560/46-3AC 560 577 620 725 670 60 100 15 64 10 24 SPA560/6-1AC 560 577 620 725 670 60 100 15 44 10 22 SPA630/4-1EC 635 648 728 805 750 71 130 20 6 11 27 SPA630/4-3EC 635 648 728 805 750 71 130 20 6 11 27 SPA630/46-3AC 635 648 728 805 750 80 130 20 53 11 39 SPA630/6-1AC 635 648 728 805 750 60 130 20 25 11 26 SPA630/68-3AC 635 648 728 805 750 60 130 20 25 11 26 SPA710/46-3AC 711 715 799 850 810 71 150 20 38 15 40 SPA710/6-1EC 711 715 799 850 810 71 150 20-17 15 29 SPA710/6-3EC 711 715 799 850 810 71 150 20-17 15 29 SPA710/68-3AC 711 715 799 850 810 71 150 20-15 34 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 27

RAPTOR SPA Accessories Electronic Controller Transformer Controller Louvre Shutter Wall Cowl Wiring Diagram SPA250/2-1AC 149-EL31 149-TC12 064-0250-C SWC25/31 152-177 SPA250/4-1AC 149-EL31 149-TC12 064-0250-C SWC25/31 152-177 SPA315/4-1AC 149-EL31 149-TC12 064-0315-C SWC25/31 152-177 SPA350/4-1AC 149-EL61 149-TC14 064-0350-C SWC35/40 152-177 SPA400/4-1AC 149-EL61TK 149-TC14 064-0400-C SWC35/40 152-108 SPA450/4-1AC 149-EL61TK 149-TC18 064-0450-C SWC45/50 152-104B SPA450/6-1AC 149-EL31TK 149-TC12 064-0450-C SWC45/50 152-104B SPA500/4-1AC 149-EL61TK 149-TC14 064-0500-C SWC45/50 152-104B SPA500/6-1AC 149-EL31TK 149-TC110 064-0500-C SWC56/63 152-104B SPA560/4-1AC 149-EL61TK 149-TC110 064-0560-C SWC56/63 152-104B SPA560/6-1AC 149-EL61TK 149-TC14 064-0560-C SWC56/63 152-104B SPA630/6-1AC 149-EL61TK 149-TC14 064-0630-C SWC56/63 152-104B Transformer Controller Louvre Shutter Wall Cowl Wiring Diagram SPA400/46-3AC 149-TC33 064-0400-C SWC35/40 152-108 SPA450/46-3AC 149-TC33 064-0450-C SWC45/50 152-108 SPA500/46-3AC 149-TC33 064-0500-C SWC45/50 152-108 SPA560/46-3AC 149-TC33 064-0560-C SWC56/63 152-108 SPA630/46-3AC 149-TC310 064-0630-C SWC56/63 152-108 SPA630/68-3AC 149-TC33 064-0630-C SWC56/63 152-108 SPA710/46-3AC 149-TC310 064-0710-C - 152-108 SPA710/68-3AC 149-TC33 064-0710-C - 152-108 Electronic Controller Louvre Shutter Wall Cowl Wiring Diagram SPA250/2-1EC 149-POT-10 064-0250-C SWC25/31 152-00036 SPA250/2B-1EC 149-POT-10 064-0250-C SWC25/31 152-00036 SPA315/4-1EC 149-POT-10 064-0315-C SWC25/31 152-00044 SPA350/4-1EC 149-POT-10 064-0350-C SWC35/40 152-00044 SPA350/6-1EC 149-POT-10 064-0350-C SWC35/40 152-00036 SPA400/4-1EC 149-POT-10 064-0400-C SWC35/40 152-00044 SPA450/4-1EC 149-POT-10 064-0400-C SWC35/40 152-00044 SPA500/4-1EC 149-POT-10 064-0500-C SWC45/50 152-MOEA03K1 SPA560/4-1EC 149-POT-10 064-0560-C SWC56/63 152-MOEA03K1 SPA630/4-1EC 149-POT-10 064-0630-C SWC56/63 152-MOEA03K1 SPA710/6-1EC 149-POT-10 064-0710-C - 152-MOEA03K1 Electronic Controller Louvre Shutter Wall Cowl Wiring Diagram SPA500/4-3EC 149-POT-10 064-0500-C SWC45/50 152-MOEA03K3 SPA560/4-3EC 149-POT-10 064-0560-C SWC56/63 152-MOEA03K3 SPA630/4-3EC 149-POT-10 064-0630-C SWC56/63 152-MOEA03K3 SPA710/6-3EC 149-POT-10 064-0710-C - 152-MOEA03K3 28 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SPA Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 29

WINDOW/WALL SAX Window/Wall Mounted Centrifugal Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 2 standard sizes from 230mm to 305mm. ü Air volume flow rates up to 0.53 m³/s. ü Static pressures up to 80 Pa. ü Suitable for operating temperatures up to +40 C. ü Available in AC. CASING Unit casings shall be manufactured from shockproof, heat resistant white plastic. The fans shall be suitable for installation into window, wall or ceiling mounted applications. All built in units shall have a telescopic wall liner for installations between 240mm and 315mm and 5m 4 core cable to assist installation. The unit shall comply with Documents F1 of the Building Regulations and is BEAB approved. All units have IPX4 protection and are splash proof as required under current electrical regulations. IMPELLER Axial impellers shall be provided with fixed blade angles to meet the required duty. The impeller construction shall comprise of white plastic. MOTORS Motors have sealed for life, self lubricating bearings which do not require ventilation. They are sealed in a housing, ensuring quiet operation of the fan. Motors shall be Class B insulated to EN 60034-5. Motors are connected in accordance with EN60335-1, double insulated with in-built thermal overload protection. The fan shall be suitable for operating temperatures up to +40 C. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SAX units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Pubs Restaurants Offices Kitchens Factories School and Shops 30 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

WINDOW/WALL SAX Performance, SFP & Electrical Data SINGLE Phase - 220 to 240V / 50Hz Speed r/min Airflow m³/s Pressure Pa Motor Electrical Data Peak Amps Input W dba @ 3m SAX23/9A 1350 0.23 75 0.20 45 49 SAX23/9AR 1350 0.23 75 0.20 45 49 SAX23/9ARB 1350 0.23 75 0.20 45 49 SAX30/12A 1200 0.53 80 0.39 90 51 SAX30/12AR 1200 0.53 80 0.39 90 51 SAX30/12ARB 1200 0.53 80 0.39 90 51 Peak Amps @ 230V / 1Ph / 50Hz. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 31

WINDOW/WALL SAX Dimensional Data WINDOW MOUNT A C B WALL MOUNT D E F Fan Size A B C D E F Weight kg SAX23/9A 9 340 200 40 - - - 5 SAX23/9AR 9 340 200 40 - - - 6 SAX23/9ARB 9 - - - 415 40 240-315 11 SAX30/12A 12 420 230 40 - - - 8 SAX30/12AR 12 420 230 40 - - - 9 SAX30/12ARB 12 - - - 495 40 240-315 15 Dimensions are in mm. 32 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

WINDOW/WALL SAX Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 33

WINDOW/WALL SAX Notes 34 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Ducted/Inline

36 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

COMPACT SCD Case Mounted Axial Flow Fan Ducted/Inline For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 6 standard sizes from 315mm to 630mm. ü Air volume flow rates up to 4.24 m³/s. ü Static pressures up to 191 Pa. ü Suitable for operating temperatures up to +70 C. ü Available in AC. CASING The all metal fan casing provides a long lasting and robust construction.the units have been constructed from mild steel and suitably treated to ensure full corrosion protection, with both motors and axial impellers mounted within the length of the unit casing. All casing parts shall have a powder coated polyester epoxy paint finish in pastel beige (RAL 7032). IMPELLER Adjustable pitch aerofoil impellers are provided with blades made from high quality GRP. Impellers are factory set at an angle to provide maximum performance. The hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are to be dynamically balanced to ISO 14694 Grade G6.3. MOTORS Three phase multi-voltage motors are wound for either (Delta) 230V/3Ph/50Hz or (Star) 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls. Fans are suitable for operating temperatures between -20 C and +70 C fixed speed and -20 C and +50 C when used with a speed controller. Electrical connection to the motor is provided by an IP55 terminal box which is fitted onto the outer side of the fan casing. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCD units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-EL Transformer Controller : 149-TC Inverter : 149-ODE Impeller Side Guard : 078C Wall Cowl : SWC Ancillary Pack : APK Mounting Feet : 060A Matching Flanges : 061A Flexible Connections : 063 MAN AV Mounts (Set of 4) : 062 00 TYPICAL APPLICATIONS Silencer : 068 DE*P(C) Factories Sports Halls Shops Industrial Units Warehousing Schools Kitchens Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 37

COMPACT SCD Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SCD315/4-3AC 1435 SCD350/4-3AC 1435 SCD450/4-3AC 1405 SCD500/4-3AC 1435 SCD560/4-3AC 1445 SCD630/4-3AC 1435 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.584 0.517 Inlet 50 23.4 <125W 0.33 0.120 W/(L/s) 0.21 0.24 Outlet 49 m³/s 0.622 0.574 0.517 0.432 Inlet - 30.6 <125W 0.34 0.120 W/(L/s) 0.17 0.19 0.23 0.29 Outlet - m³/s 1.513 1.435 1.343 1.243 1.136 Inlet 60 48.6 58 0.60 0.306 W/(L/s) 0.18 0.19 0.22 0.24 0.27 Outlet 59 m³/s 2.143 2.039 1.930 1.811 1.674 Inlet 59 49.8 58 1.07 0.485 W/(L/s) 0.20 0.22 0.24 0.26 0.29 Outlet 60 m³/s 2.887 2.746 2.615 2.479 2.330 1.989 Inlet 61 50.9 58 1.74 0.737 W/(L/s) 0.21 0.23 0.26 0.28 0.31 0.37 Outlet 61 m³/s 4.249 4.073 3.884 3.690 3.494 3.075 Inlet 65 52.4 58 2.70 1.220 W/(L/s) 0.25 0.27 0.29 0.32 0.34 0.40 Outlet 67 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 38 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

COMPACT SCD Dimensional Data B A TERMINAL BOX FITTED AS STANDARD COMPLETE WITH CONNECTION BLOCK. CABLE ENTRY IS 21 D E HOLES F EQUI-SPACED ON G PCD C A B C D E F G Weight kg SCD315 315 383 180 207 8 10 356 8 SCD350 350 421 180 224 8 10 395 8 SCD450 450 515 190 274 12 9.5 487 14 SCD500 500 567 250 300 12 9.5 541 21 SCD560 560 636 250 330 16 11.5 605 23 SCD630 630 709 250 365 16 11.5 674 30 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 39

COMPACT SCD Accessories Transformer Controller Inverter Controller 1PH-3PH IP66 Inverter Controller 1PH-3PH IP20 Inverter Controller 3PH-3PH IP66 Inverter Controller 3PH-3PH IP20 Impeller Side Guard SCD315/4-3AC 149-TC33 - - - - 078C-0315-C SCD350/4-3AC 149-TC33 - - - - 078C-0350-C SCD450/4-3AC 149-TC33 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 078C-0450-C SCD500/4-3AC 149-TC33 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 078C-0500-C SCD560/4-3AC 149-TC33 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 078C-0560-C SCD630/4-3AC 149-TC35 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 078C-0630-C Wall Cowl Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) SCD315/4-3AC SWC25/31 APK315SCD/001 060A-0315-C 061A-0315-C 063-0315-MAN150 062-001 SCD350/4-3AC SWC35/40 APK350SCD/001 060A-0350-C 061A-0350-C 063-0350-MAN150 062-001 SCD450/4-3AC SWC45/50 APK450SCD/001 060A-0450-C 061A-0450-C 063-0450-MAN150 062-001 SCD500/4-3AC SWC45/50 APK500SCD/002 060A-0500-C 061A-0500-C 063-0500-MAN150 062-002 SCD560/4-3AC SWC56/63 APK560SCD/002 060A-0560-C 061A-0560-C 063-0560-MAN150 062-002 SCD630/4-3AC SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C 063-0630-MAN200 062-002 Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded Wiring Diagram SCD315/4-3AC 068-0315-1DEP 068-0315-1DENP 068-0315-2DEP 068-0315-2DENP 152-611 SCD350/4-3AC 068-0350-1DEP 068-0350-1DENP 068-0350-2DEP 068-0350-2DENP 152-611 SCD450/4-3AC 068-0450-1DEPC 068-0450-1DENPC 068-0450-2DEPC 068-0450-2DENPC 152-611 SCD500/4-3AC 068-0500-1DEPC 068-0500-1DENPC 068-0500-2DEPC 068-0500-2DENPC 152-611 SCD560/4-3AC 068-0560-1DEPC 068-0560-1DENPC 068-0560-2DEPC 068-0560-2DENPC 152-611 SCD630/4-3AC 068-0630-1DEPC 068-0630-1DENPC 068-0630-2DEPC 068-0630-2DENPC 152-611 * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. 40 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

COMPACT SCD Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 41

RAPTOR SDA Case Mounted Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 7 standard sizes from 250mm to 630mm. ü Air volume flow rates up to 4.60 m³/s. ü Static pressures up to 290 Pa. ü Suitable for operating temperatures up to +70 C. ü Available in AC & EC. CASING The all metal fan casing and guard provide a long lasting and robust construction. The units have been constructed from mild steel and suitably treated to ensure full corrosion protection. The guard is powder coated polyester epoxy paint finish in black (RAL 9005). Fan casings are powder coated polyester epoxy paint finish in pastel beige (RAL 7032). IMPELLER Impellers are high quality Ziehl-Abegg Sickle Blade or FE2owlet in pressure die cast aluminium or high performance composite material providing enhanced aerodynamic properties, low noise and reliability, dynamically balanced to ISO 14694 Grade G6.3 and finished in black (RAL 9005). Ziehl-Abegg Sickle Blade and FE2owlet impellers provide significant noise reduction. MOTORS Motors are highly efficient, lightweight external rotor motors, insulated to Class F, with integral thermal overload protection. Sizes 250-350 weatherproofed to IP44. Sizes 400-630 weatherproofed to IP54. All fans are suitable for use with a speed controller. Electrical connection to the motor shall be provided by an IP55 terminal box. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SDA units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Sports Halls Squash Courts Schools & Colleges Shops Retail Parks Commercial Kitchens Factories Industrial Units Warehousing ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-EL, 149-POT Transformer Controller : 149-TC Ancillary Pack : APK Mounting Feet : 060A Matching Flanges : 061A Flexible Connections : 063 MAN AV Mounts (Set of 4) : 062 00 Silencer : 068 DE*P(C) Wall Cowl : SWC 42 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SDA Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SDA250/4-1AC 1374 SDA400/4-1AC 1359 SDA450/4-1AC 1302 SDA450/6-1AC 915 SDA500/4-1AC* 1359 SDA500/6-1AC 910 SDA560/4-1AC 1341 SDA560/6-1AC 924 SDA630/6-1AC 872 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.260 0.213 Inlet 39 - <125W 0.24 0.046 W/(L/s) 0.14 0.22 Outlet 40 m³/s 1.003 0.960 0.899 0.831 0.757 Inlet 49 31.1 41.3 1.04 0.24 W/(L/s) 0.19 0.21 0.24 0.27 0.31 Outlet 49 m³/s 1.854 1.779 1.652 1.529 1.422 Inlet 50 34.0 41.8 2.45 0.545 W/(L/s) 0.28 0.29 0.31 0.34 0.37 Outlet 49 m³/s 1.260 1.138 1.011 0.800 Inlet 42 30.0 41 0.89 0.189 W/(L/s) 0.14 0.16 0.19 0.23 Outlet 41 m³/s 2.463 2.382 2.289 2.181 2.052 1.696 Inlet 51 32.9 40.3 3.93 0.720 W/(L/s) 0.30 0.32 0.35 0.38 0.41 0.51 Outlet 51 m³/s 1.719 1.549 1.363 1.155 Inlet 46 30.4 40.6 1.25 0.289 W/(L/s) 0.15 0.17 0.20 0.24 Outlet 46 m³/s 3.244 3.137 3.004 2.857 2.710 2.420 Inlet 63 35.8 41.8 5.13 1.150 W/(L/s) 0.32 0.34 0.37 0.40 0.42 0.48 Outlet 63 m³/s 2.192 2.052 1.902 1.738 1.561 Inlet 52 33.0 42 2.18 0.390 W/(L/s) 0.19 0.21 0.24 0.27 0.30 Outlet 52 m³/s 2.985 2.786 2.572 2.339 2.081 Inlet 49 32.2 40 2.82 0.66 W/(L/s) 0.18 0.20 0.23 0.26 0.30 Outlet 50 THREE Phase - 380V to 415V / 50Hz SDA400/4/6-3AC SDA450/4/6-3AC SDA500/4/6-3AC SDA560/4/6-3AC SDA630/4/6-3AC SDA630/6/8-3AC Speed r/min 1387 1156 1377 1111 1339 1075 1295 916 1342 1068 906 736 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw / Y dba @ 3m m³/s 1.018 0.960 0.895 0.829 0.755 Inlet 49 32.4 0.44 0.227 W/(L/s) 0.16 0.19 0.22 0.25 0.28 Outlet 50 42.7 m³/s 0.874 0.809 0.717 0.600 Inlet 46-0.28 0.165 Y W/(L/s) 0.15 0.18 0.22 0.28 Outlet 46 m³/s 1.995 1.875 1.755 1.636 1.517 1.282 Inlet 50 34.0 1.07 0.538 W/(L/s) 0.25 0.27 0.29 0.32 0.35 0.41 Outlet 49 42 m³/s 1.587 1.428 1.276 1.127 0.975 Inlet 45-0.68 0.381 Y W/(L/s) 0.24 0.27 0.31 0.35 0.40 Outlet 45 m³/s 2.448 2.363 2.277 2.177 2.054 1.785 1.440 Inlet 53 34.2 1.37 0.764 W/(L/s) 0.27 0.29 0.31 0.33 0.36 0.42 0.50 Outlet 53 41.3 m³/s 1.935 1.772 1.597 1.403 1.185 Inlet 48-0.89 0.476 Y W/(L/s) 0.27 0.28 0.32 0.37 0.43 Outlet 48 m³/s 3.098 3.020 2.924 2.811 2.691 2.453 2.196 Inlet 57 33.7 2.52 1.169 W/(L/s) 0.32 0.34 0.36 0.39 0.42 0.49 0.55 Outlet 57 40.1 m³/s 2.348 2.152 1.939 1.733 1.511 Inlet 51-1.27 0.654 Y W/(L/s) 0.25 0.29 0.33 0.38 0.43 Outlet 51 m³/s 4.593 4.482 4.366 4.244 4.115 3.834 3.514 3.141 Inlet 67 40.7 3.38 1.812 W/(L/s) 0.36 0.38 0.40 0.42 0.44 0.50 0.55 0.62 Outlet 67 45.6 m³/s 3.816 3.626 3.430 3.226 3.014 2.562 Inlet 59-2.17 1.324 Y W/(L/s) 0.31 0.34 0.37 0.40 0.43 0.52 Outlet 59 m³/s 3.000 2.821 2.627 2.433 2.226 Inlet 49 33.8 1.20 0.62 W/(L/s) 0.17 0.18 0.21 0.23 0.27 Outlet 48 41.6 m³/s 2.480 2.257 1.965 1.598 Inlet 46-0.74 0.412 Y W/(L/s) 0.15 0.17 0.21 0.27 Outlet 44 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. *An Inverter must be installed with this fan. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 43

RAPTOR SDA Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SDA250/2-1EC SDA250/2B-1EC SDA350/4-1EC SDA350/6-1EC SDA400/4-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.454 0.422 0.388 0.350 0.308 Inlet 55-1.02 0.106 W/(L/s) 0.23 0.25 0.28 0.30 0.34 Outlet 54 m³/s 0.393 0.346 0.296 0.242 Inlet 49-0.64 - W/(L/s) 0.17 0.19 0.21 0.27 Outlet 48 <125W m³/s 0.230 0.165 Inlet 38-0.19 - W/(L/s) 0.09 0.11 Outlet 37 m³/s 0.084 Inlet 20* - 0.07 - W/(L/s) 0.04 Outlet 20* m³/s 0.615 0.579 0.548 0.518 0.490 0.433 0.361 Inlet 61 31.7 2.00 0.226 W/(L/s) 0.35 0.39 0.42 0.45 0.47 0.52 0.65 Outlet 60 m³/s 0.475 0.453 0.427 0.397 0.362 0.255 Inlet 55-1.23 - W/(L/s) 0.30 0.30 0.30 0.32 0.36 0.54 Outlet 55 42.2 m³/s 0.304 0.258 0.197 Inlet 44-0.37 - W/(L/s) 0.14 0.14 0.19 Outlet 44 m³/s 0.118 Inlet 20* - 0.09 - W/(L/s) 0.05 Outlet 20* m³/s 1.199 1.152 1.104 1.055 1.004 0.895 0.766 Inlet 57 38.6 1.98 0.424 W/(L/s) 0.31 0.34 0.36 0.39 0.42 0.48 0.55 Outlet 58 m³/s 0.924 0.877 0.820 0.752 0.676 Inlet 52-1.05 - W/(L/s) 0.22 0.23 0.26 0.28 0.32 Outlet 53 47.2 m³/s 0.555 0.461 Inlet 41-0.32 - W/(L/s) 0.09 0.12 Outlet 41 m³/s 0.190 Inlet 20* - 0.11 - W/(L/s) 0.05 Outlet 20* m³/s 0.784 0.649 0.521 0.400 Inlet 44-1.06 0.115 W/(L/s) 0.15 0.18 0.22 0.29 Outlet 43 m³/s 0.609 0.494 0.350 Inlet 40-0.62 - W/(L/s) 0.11 0.13 0.19 Outlet 40 <125W m³/s 0.378 Inlet 29-0.20 - W/(L/s) 0.06 Outlet 29 m³/s 0.139 Inlet 20* - 0.08 - W/(L/s) 0.03 Outlet 20* m³/s 1.410 1.370 1.324 1.274 1.219 1.097 0.947 Inlet 58 49.5 2.29 0.490 W/(L/s) 0.30 0.32 0.34 0.36 0.39 0.45 0.53 Outlet 58 m³/s 1.134 1.055 0.984 0.912 0.832 Inlet 53-1.17 - W/(L/s) 0.18 0.21 0.23 0.26 0.29 Outlet 53 58.5 m³/s 0.673 0.560 0.410 Inlet 41-0.35 - W/(L/s) 0.08 0.11 0.15 Outlet 41 m³/s 0.224 Inlet 20* - 0.11 - W/(L/s) 0.04 Outlet 20* A variable speed drive is integrated within the fan. Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 44 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SDA Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SDA450/4-1EC SDA500/4-1EC SDA560/4-1EC SDA630/4-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 1.362 1.306 1.220 1.090 0.908 Inlet 56 41.0 1.38 0.284 W/(L/s) 0.18 0.20 0.22 0.26 0.32 Outlet 56 m³/s 1.049 0.979 0.823 Inlet 51-0.72 - W/(L/s) 0.12 0.13 0.17 Outlet 52 50.6 m³/s 0.640 Inlet 41-0.23 - W/(L/s) 0.05 Outlet 41 m³/s 0.213 Inlet 20* - 0.10 - W/(L/s) 0.04 Outlet 20* m³/s 2.384 2.317 2.245 2.165 2.077 1.860 1.523 Inlet 57 40.1 3.32 0.740 W/(L/s) 0.27 0.29 0.31 0.33 0.35 0.40 0.47 Outlet 57 m³/s 1.921 1.828 1.713 1.562 1.321 Inlet 52-1.76 - W/(L/s) 0.17 0.19 0.21 0.24 0.29 Outlet 52 46.9 m³/s 1.120 0.958 Inlet 42-0.48 - W/(L/s) 0.08 0.10 Outlet 41 m³/s 0.352 Inlet 20* - 0.29 - W/(L/s) 0.08 Outlet 20* m³/s 2.769 2.685 2.569 2.443 2.322 2.021 Inlet 54 41.6 3.40 0.742 W/(L/s) 0.23 0.25 0.27 0.30 0.32 0.37 Outlet 55 m³/s 2.252 2.089 1.931 1.775 1.560 Inlet 49-1.79 - W/(L/s) 0.14 0.17 0.19 0.22 0.25 Outlet 49 48.6 m³/s 1.312 1.024 Inlet 39-0.48 - W/(L/s) 0.06 0.09 Outlet 39 m³/s 0.426 Inlet 20-0.22 - W/(L/s) 0.08 Outlet 20 m³/s 3.398 3.225 3.053 2.874 2.676 2.134 Inlet 53 46.3 3.42 0.737 W/(L/s) 0.16 0.19 0.22 0.24 0.27 0.35 Outlet 53 m³/s 2.679 2.492 2.274 2.003 1.620 Inlet 49-2.06 - W/(L/s) 0.11 0.13 0.16 0.19 0.23 Outlet 49 53.3 m³/s 1.555 1.291 Inlet 41-0.54 - W/(L/s) 0.05 0.07 Outlet 41 m³/s 0.524 Inlet 20* - 0.30 - W/(L/s) 0.12 Outlet 20* A variable speed drive is integrated within the fan. Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 45

RAPTOR SDA Performance, SFP & Electrical Data THREE Phase - 380V to 480V / 50Hz or 60Hz SDA500/4-3EC SDA560/4-3EC SDA630/4-3EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 2.649 2.590 2.518 2.428 2.319 2.059 1.672 Inlet 59 41.8 1.53 0.920 W/(L/s) 0.31 0.32 0.34 0.36 0.39 0.45 0.54 Outlet 58 m³/s 2.073 1.997 1.902 1.793 1.674 Inlet 53-0.94 - W/(L/s) 0.20 0.22 0.24 0.26 0.29 Outlet 53 46.5 m³/s 1.232 1.080 Inlet 43-0.37 - W/(L/s) 0.08 0.11 Outlet 43 m³/s 0.406 Inlet 20* - 0.17 - W/(L/s) 0.04 Outlet 20* m³/s 3.048 2.964 2.861 2.735 2.588 2.239 Inlet 57 42.6 1.54 0.941 W/(L/s) 0.27 0.29 0.30 0.33 0.35 0.42 Outlet 57 m³/s 2.459 2.319 2.165 1.989 1.780 Inlet 51-0.95 - W/(L/s) 0.17 0.19 0.22 0.24 0.27 Outlet 51 49 m³/s 1.485 1.180 Inlet 42-0.36 - W/(L/s) 0.07 0.10 Outlet 42 m³/s 0.447 Inlet 20* - 0.17 - W/(L/s) 0.04 Outlet 20* m³/s 3.826 3.706 3.589 3.471 3.348 3.073 2.702 Inlet 56 48.5 1.94 1.087 W/(L/s) 0.21 0.23 0.25 0.28 0.30 0.35 0.41 Outlet 55 m³/s 3.102 2.925 2.768 2.610 2.436 1.891 Inlet 53-1.05 - W/(L/s) 0.13 0.16 0.18 0.21 0.23 0.30 Outlet 52 54.6 m³/s 1.841 1.592 0.651 Inlet 43-0.43 - W/(L/s) 0.06 0.08 0.19 Outlet 43 m³/s 0.576 Inlet 20* - 0.18 - W/(L/s) 0.03 Outlet 20* A variable speed drive is integrated within the fan. Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 46 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SDA Dimensional Data ØB ØA A SECTION A-A TERMINAL BOX FITTED AS STANDARD COMPLETE WITH CONECTION BLOCK CABLE ENTRY IS Ø21 D *SDA630/4/6-3AC, 33mm A E HOLES ØF EQUI-SPACED ON G PCD C A B C D E F G Weight kg SDA250/4-1 257 306 180 174 8 7 286 5 SDA350/4-1 356 421 180 224 8 9.5 395 10 SDA400/4-1 9 400 466 205 249 12 9.5 438 SDA400/4/6-3 10 SDA450/4-1 21 SDA450/6-1 450 515 255 274 12 9.5 487 19 SDA450/4/6-3 19 SDA500/4-1 21.5 SDA500/6-1 503 575 250 299 12 10 541 20 SDA500/4/6-3 21.5 SDA560/4-1 29 SDA560/6-1 560 636 272 329 16 11.5 605 24 SDA560/4/6-3 26 SDA630/6-1 25 SDA630/4/6-3 634 709 250 364 16 11.5 674 38 SDA630/6/8-3 25 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 47

RAPTOR SDA Accessories Electronic Controller Transformer Controller Wall Cowl Ancillary Pack* Mounting Feet (each) Matching Flanges (each) SDA250/4-1AC 149-EL31 149-TC12 SWC25/31 APK250SCD/001 060A-0250-C 061A-0250-C SDA400/4-1AC 149-EL31TK 149-TC12 SWC35/40 APK400SCD/001 060A-0400-C 061A-0400-C SDA450/4-1AC 149-EL31TK 149-TC12 SWC45/50 APK450SCD/001 060A-0450-C 061A-0450-C SDA450/6-1AC 149-EL31TK 149-TC1 SWC45/50 APK450SCD/001 060A-0450-C 061A-0450-C SDA500/4-1AC 149-FXET4AMQ - SWC45/50 APK500SCD/002 060A-0500-C 061A-0500-C SDA500/6-1AC 149-EL31TK 149-TC12 SWC45/50 APK500SCD/002 060A-0500-C 061A-0500-C SDA560/4-1AC - 149-TC110 SWC56/63 APK560SCD/002 060A-0560-C 061A-0560-C SDA560/6-1AC 149-EL31TK 149-TC14 SWC56/63 APK560SCD/002 060A-0560-C 061A-0560-C SDA630/6-1AC 149-EL61TK 149-TC14 SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C Flexible Connections (each) AV Mounts (set of 4) Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded Wiring Diagram SDA250/4-1AC 063-0250-MAN150 062-001 068-0250-1DEP 068-0250-1DENP 068-0250-2DEP 068-0250-2DENP 152-177 SDA400/4-1AC 063-0400-MAN150 062-001 068-0400-1DEPC 068-0400-1DENPC 068-0400-2DEPC 068-0400-2DENPC 152-104B SDA450/4-1AC 063-0450-MAN150 062-001 068-0450-1DEPC 068-0450-1DENPC 068-0450-2DEPC 068-0450-2DENPC 152-104B SDA450/6-1AC 063-0450-MAN150 062-001 068-0450-1DEPC 068-0450-1DENPC 068-0450-2DEPC 068-0450-2DENPC 152-104B SDA500/4-1AC 063-0500-MAN150 062-002 068-0500-1DEPC 068-0500-1DENPC 068-0500-2DEPC 068-0500-2DENPC 152-706 SDA500/6-1AC 063-0500-MAN150 062-002 068-0500-1DEPC 068-0500-1DENPC 068-0500-2DEPC 068-0500-2DENPC 152-104B SDA560/4-1AC 063-0560-MAN150 062-002 068-0560-1DEPC 068-0560-1DENPC 068-0560-2DEPC 068-0560-2DENPC 152-104B SDA560/6-1AC 063-0560-MAN150 062-002 068-0560-1DEPC 068-0560-1DENPC 068-0560-2DEPC 068-0560-2DENPC 152-104B SDA630/6-1AC 063-0630-MAN200 062-002 068-0630-1DEPC 068-0630-1DENPC 068-0630-2DEPC 068-0630-2DENPC 152-104B Transformer Controller Wall Cowl Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) SDA400/4/6-3AC 149-TC33 SWC35/40 APK400SCD/001 060A-0400-C 061A-0400-C 063-0400-MAN150 062-001 SDA450/4/6-3AC 149-TC33 SWC45/50 APK450SCD/001 060A-0450-C 061A-0450-C 063-0450-MAN150 062-001 SDA500/4/6-3AC 149-TC33 SWC45/50 APK500SCD/002 060A-0500-C 061A-0500-C 063-0500-MAN150 062-002 SDA560/4/6-3AC 149-TC33 SWC56/63 APK560SCD/002 060A-0560-C 061A-0560-C 063-0560-MAN150 062-002 SDA630/4/6-3AC 149-TC310 SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C 063-0630-MAN200 062-002 SDA630/6/8-3AC 149-TC33 SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C 063-0630-MAN200 062-002 Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded Wiring Diagram SDA400/4/6-3AC 068-0400-1DEPC 068-0400-1DENPC 068-0400-2DEPC 068-0400-2DENPC 152-108 SDA450/4/6-3AC 068-0450-1DEPC 068-0450-1DENPC 068-0450-2DEPC 068-0450-2DENPC 152-108 SDA500/4/6-3AC 068-0500-1DEPC 068-0500-1DENPC 068-0500-2DEPC 068-0500-2DENPC 152-108 SDA560/4/6-3AC 068-0560-1DEPC 068-0560-1DENPC 068-0560-2DEPC 068-0560-2DENPC 152-108 SDA630/4/6-3AC 068-0630-1DEPC 068-0630-1DENPC 068-0630-2DEPC 068-0630-2DENPC 152-108 SDA630/6/8-3AC 068-0630-1DEPC 068-0630-1DENPC 068-0630-2DEPC 068-0630-2DENPC 152-108 * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. 48 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SDA Accessories Electronic Controller Wall Cowl Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) SDA250/2-1EC 149-POT-10 SWC25/31 APK250SCD/001 060A-0250-C 061A-0250-C 063-0250-MAN150 062-001 SDA250/2B-1EC 149-POT-10 SWC25/31 APK250SCD/001 060A-0250-C 061A-0250-C 063-0250-MAN150 062-001 SDA350/4-1EC 149-POT-10 SWC35/40 APK350SCD/001 060A-0350-C 061A-0350-C 063-0350-MAN150 062-001 SDA350/6-1EC 149-POT-10 SWC35/40 APK350SCD/001 060A-0350-C 061A-0350-C 063-0350-MAN150 062-001 SDA400/4-1EC 149-POT-10 SWC35/40 APK400SCD/001 060A-0400-C 061A-0400-C 063-0400-MAN150 062-001 SDA450/4-1EC 149-POT-10 SWC45/50 APK450SCD/001 060A-0450-C 061A-0450-C 063-0450-MAN150 062-001 SDA500/4-1EC 149-POT-10 SWC45/50 APK500SCD/002 060A-0500-C 061A-0500-C 063-0500-MAN150 062-002 SDA560/4-1EC 149-POT-10 SWC56/63 APK560SCD/002 060A-0560-C 061A-0560-C 063-0560-MAN150 062-002 SDA630/4-1EC 149-POT-10 SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C 063-0630-MAN200 062-002 Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded Wiring Diagram SDA250/2-1EC 068-0250-1DEP 068-0250-1DENP 068-0250-2DEP 068-0250-2DENP 152-00036 SDA250/2B-1EC 068-0250-1DEP 068-0250-1DENP 068-0250-2DEP 068-0250-2DENP 152-00036 SDA350/4-1EC 068-0350-1DEP 068-0350-1DENP 068-0350-2DEP 068-0350-2DENP 152-00044 SDA350/6-1EC 068-0350-1DEP 068-0350-1DENP 068-0350-2DEP 068-0350-2DENP 152-00036 SDA400/4-1EC 068-0400-1DEPC 068-0400-1DENPC 068-0400-2DEPC 068-0400-2DENPC 152-00044 SDA450/4-1EC 068-0450-1DEPC 068-0450-1DENPC 068-0450-2DEPC 068-0450-2DENPC 152-00044 SDA500/4-1EC 068-0500-1DEPC 068-0500-1DENPC 068-0500-2DEPC 068-0500-2DENPC 152-MOEA03K1 SDA560/4-1EC 068-0560-1DEPC 068-0560-1DENPC 068-0560-2DEPC 068-0560-2DENPC 152-MOEA03K1 SDA630/4-1EC 068-0630-1DEPC 068-0630-1DENPC 068-0630-2DEPC 068-0630-2DENPC 152-MOEA03K1 Electronic Controller Wall Cowl Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) SDA500/4-3EC 149-POT-10 SWC45/50 APK500SCD/002 060A-0500-C 061A-0500-C 063-0500-MAN150 062-002 SDA560/4-3EC 149-POT-10 SWC56/63 APK560SCD/002 060A-0560-C 061A-0560-C 063-0560-MAN150 062-002 SDA630/4-3EC 149-POT-10 SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C 063-0630-MAN200 062-002 Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded Wiring Diagram SDA500/4-3EC 068-0500-1DEPC 068-0500-1DENPC 068-0500-2DEPC 068-0500-2DENPC 152-MOEA03K3 SDA560/4-3EC 068-0560-1DEPC 068-0560-1DENPC 068-0560-2DEPC 068-0560-2DENPC 152-MOEA03K3 SDA630/4-3EC 068-0630-1DEPC 068-0630-1DENPC 068-0630-2DEPC 068-0630-2DENPC 152-MOEA03K3 * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 49

RAPTOR SDA Notes 50 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

VIPER SCC Duct Mounted Centrifugal Fan UK Patent Number GB2503270 For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 8 standard sizes from 250mm to 630mm. ü Air volume flow rates up to 1.73 m³/s (AC) and 1.73 m³/s (EC). ü Static pressures up to 660 Pa (AC) and 973 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Available in AC & EC. CASING The all metal fan casing and guard provide a long lasting and robust construction. The units have been constructed from mild steel and suitably treated to ensure full corrosion protection. The guard is powder coated polyester epoxy paint finish in black (RAL 9005). Fan casings are powder coated polyester epoxy paint finish in pastel beige (RAL 7032). IMPELLER High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit. MOTORS The units may have either an EC or AC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability. All motors are suitable for use in ambient air conditions up to +60 C. Electrical connection to the motor shall be provided by an IP55 terminal box. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCC units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Sports Hall Squash Courts Schools & Colleges Shops Retail Parks Commercial Kitchens Factories Industrial Units Warehousing ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-POT Transformer Controller : 149-TC Ancillary Pack : APK Mounting Feet : 060A Matching Flanges : 061A Flexible Connections : 063 MAN AV Mounts (Set of 4) : 062 00 Silencer : 068 DE*P(C) Impeller Side Guard : 078C Wall Cowl : SWC Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 51

VIPER SCC Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SCC250-1AC 2520 SCC315-1AC 2585 SCC350-1AC 2755 SCC400-1AC 2740 SCC450-1AC 1283 SCC500-1AC 1392 SCC560-1AC 1350 SCC630-1AC 1415 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data m³/s 0.133 0.127 0.120 0.113 0.107 0.091 0.072 0.050 0.026 Inlet 40 22.3 0.32 0.48 0.065 W/(L/s) 0.47 0.50 0.53 0.56 0.61 0.71 0.90 1.25 2.21 Outlet 41 m³/s 0.231 0.227 0.222 0.216 0.209 0.192 0.173 0.152 0.132 0.109 0.083 Inlet 49 28.3 0.60 0.97 0.140 W/(L/s) 0.54 0.56 0.59 0.62 0.65 0.72 0.82 0.93 1.06 1.25 1.56 Outlet 48 m³/s 0.373 0.366 0.359 0.352 0.345 0.329 0.312 0.293 0.273 0.251 0.225 0.161 Inlet 51 34.3 1.14 1.7 0.262 W/(L/s) 0.62 0.64 0.66 0.69 0.71 0.77 0.83 0.90 0.98 1.07 1.18 1.53 Outlet 50 m³/s 0.433 0.423 0.413 0.404 0.394 0.374 0.353 0.332 0.309 0.285 0.257 0.182 Inlet 48 38.0 1.17 1.7 0.270 W/(L/s) 0.52 0.54 0.56 0.58 0.61 0.66 0.72 0.79 0.86 0.95 1.05 1.42 Outlet 49 m³/s 0.461 0.436 0.409 0.379 0.345 0.263 0.160 0.041 Inlet 44 28.3 0.65 1.2 0.140 W/(L/s) 0.27 0.30 0.33 0.36 0.41 0.53 0.81 2.66 Outlet 44 m³/s 0.688 0.663 0.640 0.616 0.592 0.540 0.475 0.377 0.206 0.060 Inlet 43 37.8 1.29 3.9 0.257 W/(L/s) 0.32 0.34 0.37 0.39 0.42 0.47 0.55 0.67 1.03 2.51 Outlet 43 m³/s 1.142 1.104 1.062 1.016 0.967 0.859 0.737 0.592 0.396 0.133 Inlet 49 32.3 2.24 5 0.463 W/(L/s) 0.40 0.41 0.44 0.46 0.49 0.56 0.65 0.77 1.04 2.60 Outlet 50 m³/s 1.726 1.685 1.643 1.601 1.557 1.464 1.362 1.247 1.111 0.939 0.687 Inlet 57 34.1 4.95 7 0.983 W/(L/s) 0.54 0.56 0.58 0.60 0.62 0.67 0.73 0.80 0.90 1.03 1.29 Outlet 58 Peak Amps SC Amps Input kw dba @ 3m Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 52 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

VIPER SCC Performance, SFP & Electrical Data SINGLE Phase - 220V to 277V / 50Hz or 60Hz SCC250-1EC SCC315-1EC SCC350-1EC SCC400-1EC SCC450-1EC SCC500-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data dba @ 3m Peak Input Amps kw m³/s 0.177 0.173 0.169 0.165 0.161 0.153 0.144 0.134 0.122 0.109 0.095 0.055 Inlet 52 35.7 1.14 0.130 W/(L/s) 0.63 0.65 0.68 0.70 0.73 0.79 0.86 0.94 1.03 1.15 1.30 2.01 Outlet 53 m³/s 0.170 0.164 0.159 0.154 0.148 0.138 0.127 0.115 0.104 0.092 0.078 0.048 Inlet 51 39.9 0.90 - W/(L/s) 0.57 0.59 0.61 0.63 0.65 0.70 0.76 0.83 0.92 1.03 1.18 1.84 Outlet 52 m³/s 0.103 0.096 0.087 0.078 0.068 0.051 0.038 0.027 0.018 0.011 0.005 Inlet 40 32.7 0.36 - W/(L/s) 0.27 0.28 0.31 0.34 0.39 0.55 0.80 1.19 1.86 3.22 7.56 Outlet 40 m³/s 0.036 0.010 Inlet 20* 9.6 0.08 - W/(L/s) 0.11 0.39 Outlet 20* m³/s 0.309 0.304 0.298 0.293 0.287 0.275 0.262 0.249 0.235 0.219 0.203 0.166 Inlet 52 42.2 1.88 0.225 W/(L/s) 0.63 0.65 0.67 0.70 0.72 0.77 0.82 0.88 0.95 1.03 1.11 1.35 Outlet 52 m³/s 0.283 0.277 0.271 0.263 0.255 0.237 0.215 0.192 0.171 0.152 0.134 0.104 Inlet 48 40.3 1.46 - W/(L/s) 0.59 0.59 0.59 0.59 0.60 0.63 0.68 0.76 0.87 1.00 1.15 1.54 Outlet 48 m³/s 0.181 0.167 0.152 0.137 0.120 0.085 0.059 0.043 0.031 0.022 0.014 Inlet 36 37.5 0.55 - W/(L/s) 0.25 0.26 0.28 0.30 0.34 0.49 0.74 1.10 1.63 2.46 3.99 Outlet 37 m³/s 0.063 0.020 Inlet 20* 13.2 0.09 - W/(L/s) 0.09 0.28 Outlet 20* m³/s 0.400 0.381 0.366 0.351 0.338 0.312 0.285 0.257 0.226 0.193 0.160 0.110 Inlet 51 43.0 1.81 0.183 W/(L/s) 0.51 0.52 0.54 0.55 0.57 0.60 0.65 0.72 0.81 0.95 1.14 1.68 Outlet 51 m³/s 0.324 0.313 0.299 0.282 0.263 0.224 0.190 0.161 0.136 0.114 0.096 0.068 Inlet 48 44.1 1.44 - W/(L/s) 0.35 0.36 0.37 0.39 0.41 0.47 0.55 0.66 0.81 1.00 1.23 1.88 Outlet 46 m³/s 0.203 0.182 0.152 0.119 0.096 0.066 0.047 0.031 0.019 Inlet 39 37.2 0.40 - W/(L/s) 0.16 0.17 0.20 0.26 0.32 0.50 0.78 1.26 2.25 Outlet 38 m³/s 0.081 0.022 Inlet 25 13.8 0.09 - W/(L/s) 0.07 0.25 Outlet 30 m³/s 0.419 0.406 0.393 0.379 0.365 0.335 0.303 0.269 0.235 0.203 0.174 0.130 Inlet 53 42.4 1.80 0.192 W/(L/s) 0.51 0.52 0.53 0.54 0.55 0.59 0.64 0.71 0.81 0.95 1.11 1.53 Outlet 53 m³/s 0.339 0.327 0.314 0.300 0.284 0.250 0.210 0.172 0.141 0.116 0.096 0.065 Inlet 50 45.1 1.34 - W/(L/s) 0.35 0.36 0.37 0.39 0.40 0.45 0.53 0.65 0.81 1.01 1.26 1.99 Outlet 49 m³/s 0.213 0.193 0.166 0.131 0.102 0.064 0.040 0.022 0.007 Inlet 41 38.9 0.37 - W/(L/s) 0.16 0.17 0.19 0.24 0.31 0.52 0.91 1.82 6.03 Outlet 41 m³/s 0.081 0.016 Inlet 23 12.8 0.08 - W/(L/s) 0.07 0.34 Outlet 24 m³/s 0.713 0.702 0.690 0.677 0.664 0.635 0.604 0.568 0.526 0.474 0.406 0.113 Inlet 52 50.1 1.77 0.372 W/(L/s) 0.40 0.42 0.45 0.47 0.49 0.55 0.60 0.66 0.72 0.80 0.90 1.82 Outlet 54 m³/s 0.559 0.544 0.528 0.512 0.493 0.451 0.397 0.316 0.163 Inlet 46 49.3 0.93 - W/(L/s) 0.27 0.29 0.31 0.34 0.36 0.42 0.49 0.59 0.85 Outlet 47 m³/s 0.336 0.309 0.276 0.230 0.148 Inlet 35 40.4 0.29 - W/(L/s) 0.13 0.15 0.18 0.23 0.32 Outlet 35 m³/s 0.112 Inlet 25 8.2 0.11 - W/(L/s) 0.08 Outlet 26 m³/s 1.061 1.051 1.040 1.028 1.017 0.993 0.967 0.940 0.911 0.879 0.844 0.761 Inlet 55 51.5 3.98 0.833 W/(L/s) 0.62 0.64 0.66 0.68 0.70 0.74 0.79 0.83 0.88 0.94 0.99 1.12 Outlet 58 m³/s 0.846 0.832 0.817 0.802 0.786 0.753 0.716 0.674 0.625 0.565 0.485 0.100 Inlet 50 50.7 2.16 - W/(L/s) 0.42 0.44 0.46 0.48 0.50 0.55 0.60 0.65 0.72 0.79 0.89 2.23 Outlet 52 m³/s 0.509 0.483 0.454 0.420 0.380 0.258 Inlet 38 42.3 0.57 - W/(L/s) 0.19 0.22 0.24 0.27 0.31 0.42 Outlet 39 m³/s 0.171 Inlet 20* 15.9 0.24 - W/(L/s) 0.07 Outlet 21 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 53

VIPER SCC Performance, SFP & Electrical Data SINGLE Phase - 220V to 277V / 50Hz or 60Hz SCC560-1EC SCC630-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data dba @ 3m Peak Input Amps kw m³/s 1.247 1.231 1.215 1.199 1.181 1.144 1.102 1.055 1.001 0.938 0.859 0.619 Inlet 51 52.7 3.38 0.719 W/(L/s) 0.47 0.49 0.51 0.53 0.54 0.59 0.63 0.68 0.73 0.79 0.86 1.07 Outlet 54 m³/s 0.999 0.979 0.958 0.935 0.910 0.853 0.784 0.692 0.558 0.346 0.075 Inlet 46 50.8 1.86 - W/(L/s) 0.32 0.34 0.36 0.38 0.40 0.45 0.50 0.57 0.67 0.87 2.42 Outlet 48 m³/s 0.597 0.559 0.513 0.455 0.373 Inlet 36 44.4 0.50 - W/(L/s) 0.14 0.16 0.19 0.22 0.27 Outlet 37 m³/s 0.197 Inlet 21 14.1 0.28 - W/(L/s) 0.13 Outlet 22 m³/s 1.384 1.361 1.336 1.310 1.283 1.225 1.160 1.087 1.002 0.900 0.775 0.375 Inlet 51 51.5 3.10 0.678 W/(L/s) 0.40 0.42 0.44 0.46 0.48 0.52 0.57 0.63 0.69 0.77 0.86 1.33 Outlet 53 m³/s 1.118 1.089 1.059 1.027 0.993 0.917 0.823 0.697 0.481 0.069 Inlet 45 51.3 1.80 - W/(L/s) 0.27 0.29 0.31 0.33 0.36 0.41 0.47 0.55 0.70 2.36 Outlet 46 m³/s 0.677 0.624 0.560 0.476 0.346 Inlet 32 44.3 0.49 - W/(L/s) 0.12 0.14 0.17 0.21 0.27 Outlet 34 m³/s 0.222 Inlet 20* 10.0 0.21 - W/(L/s) 0.04 Outlet 20* THREE Phase - 380V to 480V / 50Hz or 60Hz Control Voltage Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input Kw dba @ 3m SCC630-3EC 10V 8V 5V 2V m³/s 1.737 1.717 1.698 1.678 1.658 1.616 1.573 1.527 1.480 1.429 1.374 1.250 Inlet 57 52.4 2.17 1.350 W/(L/s) 0.60 0.62 0.64 0.67 0.69 0.74 0.78 0.83 0.88 0.93 0.99 1.11 Outlet 60 m³/s 1.388 1.364 1.340 1.315 1.290 1.234 1.173 1.105 1.028 0.937 0.827 0.456 Inlet 50 52.2 1.23 - W/(L/s) 0.40 0.42 0.44 0.46 0.49 0.53 0.58 0.64 0.70 0.77 0.85 1.20 Outlet 53 m³/s 0.835 0.795 0.750 0.699 0.639 0.466 Inlet 38 48.4 0.46 - W/(L/s) 0.17 0.19 0.21 0.24 0.27 0.36 Outlet 39 m³/s 0.282 Inlet 23 14.7 0.18 - W/(L/s) 0.07 Outlet 24 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. 54 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

VIPER SCC Dimensional Data Ø B Ø A TERMINAL BOX FITTED AS STANDARD COMPLETE WITH CONNECTION BLOCK. CABLE ENTRY Ø21 D E HOLES OF Ø F EQUI-SPACED ON G PCD C A B C D E F G Weight kg SCC250 257 306 200 164 8 7 286 6 SCC315 317 382 220 192 8 9.5 356 8 SCC350 356 421 260 211 8 9.5 395 10 SCC400 400 466 260 243 12 9.5 438 11 SCC450 450 521 300 268 12 9.5 487 18 SCC500 503 575 450 294 12 10.5 541 27 SCC560 560 641 450 327 16 11.5 605 31 SCC630 630 709 450 361 16 11.5 674 35 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 55

VIPER SCC Accessories Transformer Controller Impeller Side Guard Wall Cowl Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) SCC250-1AC 149-TC12 078C-0250-C SWC25/31 APK250SCD/001 060A-0250-C 061A-0250-C 063-0250-MAN150 SCC315-1AC 149-TC12 078C-0315-C SWC25/31 APK315SCD/001 060A-0315-C 061A-0315-C 063-0315-MAN150 SCC350-1AC 149-TC12 078C-0350-C SWC35/40 APK350SCD/001 060A-0350-C 061A-0350-C 063-0350-MAN150 SCC400-1AC 149-TC12 078C-0400-C SWC35/40 APK400SCD/001 060A-0400-C 061A-0400-C 063-0400-MAN150 SCC450-1AC 149-TC12 078C-0450-C SWC45/50 APK450SCD/001 060A-0450-C 061A-0450-C 063-0450-MAN150 SCC500-1AC 149-TC12 078C-0500-C SWC45/50 APK500SCD/002 060A-0500-C 061A-0500-C 063-0500-MAN150 SCC560-1AC 149-TC18 078C-0560-C SWC56/63 APK560SCD/002 060A-0560-C 061A-0560-C 063-0560-MAN200 SCC630-1AC 149-TC110 078C-0630-C SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C 063-0630-MAN200 AV Mounts (set of 4) Silencer 1D Unpodded Silencer 2D Unpodded Wiring Diagram SCC250-1AC 062-001 068-0250-1DENP 068-0250-2DENP 152-177 SCC315-1AC 062-001 068-0315-1DENP 068-0315-2DENP 152-177 SCC350-1AC 062-001 068-0350-1DENP 068-0350-2DENP 152-177 SCC400-1AC 062-001 068-0400-1DENPC 068-0400-2DENPC 152-177 SCC450-1AC 062-001 068-0450-1DENPC 068-0450-2DENPC 152-177 SCC500-1AC 062-002 068-0500-1DENPC 068-0500-2DENPC 152-104A SCC560-1AC 062-002 068-0560-1DENPC 068-0560-2DENPC 152-104A SCC630-1AC 062-002 068-0630-1DENPC 068-0630-2DENPC 152-104A Electronic Controller Impeller Side Guard Wall Cowl Ancillary Pack* Mounting Feet (each) Matchin Flanges (each) Flexible Connetions (each) SCC250-1EC 149-POT-10 078C-0250-C SWC25/31 APK250SCD/001 060A-0250-C 061A-0250-C 063-0250-MAN150 SCC315-1EC 149-POT-10 078C-0315-C SWC25/31 APK315SCD/001 060A-0315-C 061A-0315-C 063-0315-MAN150 SCC350-1EC 149-POT-10 078C-0350-C SWC35/40 APK350SCD/001 060A-0350-C 061A-0350-C 063-0350-MAN150 SCC400-1EC 149-POT-10 078C-0400-C SWC35/40 APK400SCD/001 060A-0400-C 061A-0400-C 063-0400-MAN150 SCC450-1EC 149-POT-10 078C-0450-C SWC45/50 APK450SCD/001 060A-0450-C 061A-0450-C 063-0450-MAN150 SCC500-1EC 149-POT-10 078C-0500-C SWC45/50 APK500SCD/002 060A-0500-C 061A-0500-C 063-0500-MAN150 SCC560-1EC 149-POT-10 078C-0560-C SWC56/63 APK560SCD/002 060A-0560-C 061A-0560-C 063-0560-MAN200 SCC630-1EC 149-POT-10 078C-0630-C SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C 063-0630-MAN200 SCC630-3EC 149-POT-10 078C-0630-C SWC56/63 APK630SCD/002 060A-0630-C 061A-0630-C 063-0630-MAN200 AV Mounts (set of 4) Silencer 1D Unpodded Silencer 2D Unpodded Wiring Diagram SCC250-1EC 062-001 068-0250-1DENP 068-0250-2DENP 152-00036 SCC315-1EC 062-001 068-0315-1DENP 068-0315-2DENP 152-00036 SCC350-1EC 062-001 068-0350-1DENP 068-0350-2DENP 152-00036 SCC400-1EC 062-001 068-0400-1DENPC 068-0400-2DENPC 152-00036 SCC450-1EC 062-001 068-0450-1DENPC 068-0450-2DENPC 152-00298951 SCC500-1EC 062-002 068-0500-1DENPC 068-0500-2DENPC 152-MOEA03K1 SCC560-1EC 062-002 068-0560-1DENPC 068-0560-2DENPC 152-MOEA03K1 SCC630-1EC 062-002 068-0630-1DENPC 068-0630-2DENPC 152-MOEA03K1 SCC630-3EC 062-002 068-0630-1DENPC 068-0630-2DENPC 152-MOEA03K1 * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. 56 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

VIPER SCC Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 57

REVOLUTION SLC Long Cased Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 11 standard sizes from 315mm to 1000mm. ü Air volume flow rates up to 19.63 m³/s. ü Static pressures up to 994 Pa. ü Suitable for operating temperatures up to +54 C. ü Available in AC. CASING The all metal fan casing provides a long lasting and robust construction. The units have been constructed from a single sheet of steel, with both motor and axial impeller mounted within the length of the unit casing. All casing parts are heavy gauge mild steel sheet, roll formed and welded for added strength and durability, hot dip galvanised to BS EN ISO 1461:2009 after fabrication and drilled to BS ISO 6580:2005 The fans are suitable for external mounting as standard. IMPELLER Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium (LM6), natural finish. Impellers are factory set at an angle to provide maximum performance. The hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are to be dynamically balanced to ISO 14694 Grade G6.3. MOTORS Motors are to be foot mounted totally enclosed metric type to IP55, with sealed for life bearings, standard industrial paint finish and Class F insulation to EN 60034-5, suitable for operating temperatures up to +54 C. Motors are to be wired via a weatherproofed cable to an IP55 protected terminal box mounted on the outside of the unit casing. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SLC units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). ACCESSORIES For full accessories & controls information please visit eltaselect.com Transformer Controller : 149-TC Inverter : 149-ODE Ancillary Pack : APK Mounting Feet : 060B Matching Flanges : 061B Flexible Connections : 063 MAN AV Mounts (Set of 4) : 062 00 Impeller Side Guard : 078C Damper : 019 Bell Mouth Inlet : 241B TYPICAL APPLICATIONS Silencer : 068 DE*P(C) Kitchen Canopy Systems Agriculture Sports Halls Industrial Units and Warehousing Factories Schools Air Conditioning Units Cooling Towers & Stations Marine Airports Hotels 58 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

REVOLUTION SLC Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SLC400/4-1AC 1435 SLC450/2-1AC 2815 SLC450/4-1AC 1465 SLC500/4A-1AC 1460 SLC500/4B-1AC 1440 SLC560/4A-1AC 1415 SLC560/4B-1AC 1460 SLC630/4-1AC 1375 SLC630/4B-1AC 1455 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 1.176 1.100 1.016 0.921 0.788 Inlet 51 47.7 58 0.94 0.209 W/(L/s) 0.15 0.17 0.20 0.23 0.27 Outlet 52 m³/s 2.927 2.884 2.841 2.796 2.751 2.657 2.558 2.453 2.342 2.225 2.105 1.852 Inlet 71 53.6 58 8.80 2.050 W/(L/s) 0.49 0.51 0.54 0.57 0.59 0.65 0.70 0.76 0.82 0.88 0.94 1.10 Outlet 70 m³/s 1.683 1.609 1.530 1.432 1.325 Inlet 57 49.6 58 1.73 0.397 W/(L/s) 0.20 0.22 0.24 0.27 0.30 Outlet 57 m³/s 2.063 1.992 1.912 1.809 1.675 1.346 Inlet 53 51.3 59 2.09 0.483 W/(L/s) 0.19 0.20 0.23 0.25 0.28 0.36 Outlet 53 m³/s 2.574 2.483 2.391 2.283 2.141 1.760 Inlet 56 52.2 59 3.24 0.702 W/(L/s) 0.25 0.27 0.28 0.30 0.33 0.40 Outlet 56 m³/s 3.034 2.939 2.846 2.750 2.647 2.399 2.001 Inlet 60 52.3 58 4.15 0.940 W/(L/s) 0.23 0.26 0.28 0.31 0.33 0.40 0.49 Outlet 59 m³/s 3.279 3.232 3.175 3.107 3.022 2.790 2.486 Inlet 60 52.5 58 5.50 1.225 W/(L/s) 0.31 0.32 0.34 0.36 0.38 0.43 0.50 Outlet 60 m³/s 4.033 3.880 3.719 3.546 3.355 2.892 Inlet 60 52.1 58 4.99 1.120 W/(L/s) 0.25 0.27 0.28 0.31 0.33 0.39 Outlet 60 m³/s 4.050 3.950 3.851 3.747 3.636 3.378 3.048 2.646 Inlet 61 55.4 60 6.02 1.399 W/(L/s) 0.24 0.27 0.30 0.32 0.35 0.40 0.47 0.55 Outlet 61 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 59

REVOLUTION SLC Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SLC315/4-3AC 1435 SLC355/4-3AC 1435 SLC450/2A-3AC 2895 SLC450/4-3AC 1455 SLC500/2A-3AC 2920 SLC500/2B-3AC 2920 SLC500/4A-3AC 1435 SLC500/4B-3AC 1450 SLC560/2-3AC 2950 SLC560/4A-3AC 1450 SLC560/4B-3AC 1470 SLC560/4C-3AC 1460 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.503 0.460 0.405 0.326 Inlet 51 23.3 <125W 0.31 0.122 W/(L/s) 0.20 0.25 0.30 0.37 Outlet 48 m³/s 0.592 0.550 0.492 Inlet 44 27.4 <125W 0.31 0.120 W/(L/s) 0.17 0.20 0.24 Outlet 43 m³/s 2.758 2.732 2.705 2.678 2.651 2.596 2.538 2.479 2.416 2.349 2.278 2.116 Inlet 73 54.1 58 4.56 2.490 W/(L/s) 0.59 0.61 0.63 0.65 0.68 0.72 0.77 0.82 0.87 0.93 0.99 1.12 Outlet 72 m³/s 1.942 1.847 1.751 1.647 1.533 1.278 Inlet 56 49.8 58 0.97 0.491 W/(L/s) 0.22 0.25 0.27 0.30 0.32 0.38 Outlet 55 m³/s 4.050 4.018 3.986 3.955 3.925 3.864 3.802 3.737 3.668 3.592 3.508 3.304 Inlet 70 55.4 58 7.06 3.937 W/(L/s) 0.71 0.74 0.76 0.79 0.81 0.85 0.89 0.93 0.98 1.03 1.08 1.21 Outlet 69 m³/s 4.508 4.482 4.455 4.426 4.397 4.334 4.268 4.200 4.130 4.058 3.983 3.822 Inlet 71 56.2 58 8.89 5.192 W/(L/s) 0.91 0.92 0.94 0.96 0.98 1.02 1.06 1.10 1.14 1.18 1.23 1.32 Outlet 71 m³/s 1.804 1.728 1.650 1.558 1.442 1.079 Inlet 53 49.4 58 0.96 0.390 W/(L/s) 0.17 0.19 0.21 0.24 0.27 0.36 Outlet 53 m³/s 2.243 2.196 2.141 2.075 1.999 1.788 Inlet 55 51.1 58 1.47 0.689 W/(L/s) 0.24 0.26 0.28 0.30 0.33 0.39 Outlet 55 m³/s 6.701 6.645 6.591 6.538 6.486 6.382 6.274 6.163 6.046 5.925 5.799 5.545 Inlet 77 58.9 59 13.90 8.420 W/(L/s) 0.96 0.98 1.00 4.02 1.05 1.09 1.13 1.18 1.23 1.28 1.33 1.44 Outlet 77 m³/s 2.612 2.540 2.459 2.370 2.275 2.066 1.788 Inlet 59 56.0 63 1.61 0.760 W/(L/s) 0.20 0.22 0.25 0.27 0.30 0.35 0.42 Outlet 58 m³/s 3.536 3.431 3.322 3.208 3.089 2.833 2.547 2.167 Inlet 60 54.3 60 2.36 1.240 W/(L/s) 0.27 0.29 0.32 0.34 0.37 0.43 0.49 0.57 Outlet 60 m³/s 3.799 3.710 3.610 3.503 3.389 3.141 2.827 2.383 Inlet 60 52.8 58 3.09 1.497 W/(L/s) 0.33 0.35 0.38 0.40 0.42 0.47 0.53 0.62 Outlet 60 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 60 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

REVOLUTION SLC Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SLC630/4A-3AC 1475 SLC630/4B-3AC 1460 SLC710/4A-3AC 1440 SLC710/4B-3AC 1460 SLC710/6A-3AC 910 SLC710/6B-3AC 940 SLC800/4A-3AC 1465 SLC800/4B-3AC 1460 SLC800/6A-3AC 940 SLC800/6B-3AC 955 SLC900/4A-3AC 1465 SLC900/4B-3AC 1470 SLC900/6A-3AC 955 SLC900/6B-3AC 960 SLC900/8-3AC 700 SLC1000/4A-3AC 1455 SLC1000/4B-3AC 1470 SLC1000/4C-3AC 1465 SLC1000/6A-3AC 955 SLC1000/6B-3AC 960 SLC1000/8-3AC 700 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall FMEG Efficiency N % Motor Electrical Data Peak Amps SC Amps Input kw dba @ 3m m³/s 3.723 3.625 3.531 3.434 3.330 3.081 2.764 2.378 Inlet 64 58.3 64 2.36-1.130 W/(L/s) 0.22 0.24 0.26 0.28 0.30 0.36 0.43 0.51 Outlet 64 m³/s 5.623 5.489 5.342 5.182 5.013 4.656 4.285 3.864 Inlet 66 57.0 61 4.56-2.240 W/(L/s) 0.37 0.38 0.40 0.42 0.45 0.50 0.56 0.62 Outlet 67 m³/s 7.459 7.309 7.149 6.977 6.794 6.400 5.965 5.470 4.873 Inlet 71 60.4 63 6.17-3.370 W/(L/s) 0.37 0.39 0.41 0.44 0.46 0.51 0.56 0.62 0.69 Outlet 71 m³/s 8.00 7.89 7.77 7.63 7.49 7.17 6.81 6.43 5.98 Inlet 73 59.0 61 8.12-4.460 W/(L/s) 0.52 0.53 0.54 0.56 0.58 0.61 0.65 0.69 0.74 Outlet 73 m³/s 3.64 3.49 3.31 3.08 2.80 Inlet 60 53.4 60 1.49-0.700 W/(L/s) 0.14 0.16 0.18 0.21 0.24 Outlet 60 m³/s 5.42 5.23 5.00 4.75 4.45 Inlet 63 53.6 58 3.71-1.470 W/(L/s) 0.26 0.27 0.29 0.31 0.33 Outlet 63 m³/s 8.30 8.19 8.08 7.95 7.81 7.51 7.21 6.90 6.56 6.17 5.63 Inlet 70 63.8 66 8.12 54.00 4.170 W/(L/s) 0.37 0.38 0.40 0.42 0.44 0.48 0.53 0.58 0.63 0.70 0.78 Outlet 69 m³/s 9.84 9.70 9.56 9.42 9.28 8.98 8.67 8.34 7.97 7.54 7.03 Inlet 75 62.7 64 10.50 77.00 6.000 W/(L/s) 0.47 0.49 0.50 0.52 0.54 0.58 0.62 0.67 0.72 0.78 0.85 Outlet 69 m³/s 6.33 6.12 5.89 5.66 5.41 4.78 Inlet 59 56.9 61 3.71 19.00 1.760 W/(L/s) 0.21 0.23 0.25 0.28 0.30 0.36 Outlet 60 m³/s 7.67 7.42 7.16 6.89 6.61 5.95 Inlet 61 54.7 58 5.94 42.00 2.570 W/(L/s) 0.29 0.31 0.33 0.35 0.38 0.43 Outlet 63 m³/s 12.940 12.810 12.670 12.530 12.390 12.080 11.750 11.370 10.940 10.460 9.940 8.740 Inlet 74 68.7 69 14.10-7.740 W/(L/s) 0.50 0.51 0.52 0.54 0.55 0.58 0.61 0.65 0.70 0.75 0.80 0.92 Outlet 74 m³/s 15.25 15.10 14.94 14.78 14.62 14.26 13.89 13.48 13.04 12.54 11.99 10.64 Inlet 75 66.0 66 21.20-11.080 W/(L/s) 0.66 0.67 0.68 0.70 0.71 0.74 0.77 0.80 0.84 0.88 0.93 1.05 Outlet 75 m³/s 8.43 8.22 8.00 7.76 7.48 6.79 5.94 Inlet 65 62.7 66 5.94-2.450 W/(L/s) 0.23 0.25 0.26 0.28 0.30 0.35 0.41 Outlet 65 m³/s 9.96 9.73 9.47 9.19 8.89 8.18 7.25 Inlet 66 59.9 62 7.30-3.450 W/(L/s) 0.31 0.32 0.34 0.35 0.37 0.42 0.48 Outlet 65 m³/s 8.05 7.68 7.24 6.74 6.10 Inlet 59 53.8 58 4.09-1.790 W/(L/s) 0.21 0.22 0.24 0.26 0.29 Outlet 59 m³/s 14.300 14.160 14.000 13.840 13.660 13.270 12.850 12.400 11.920 11.400 10.810 9.240 Inlet 81 68.7 69 14.10 102.00 8.320 W/(L/s) 0.38 0.40 0.41 0.43 0.45 0.50 0.55 0.59 0.64 0.69 0.75 0.89 Outlet 81 m³/s 17.09 16.95 16.80 16.63 16.45 16.04 15.59 15.10 14.58 14.03 13.42 11.86 Inlet 82 67.1 67 21.20-11.060 W/(L/s) 0.52 0.53 0.55 0.56 0.58 0.62 0.66 0.71 0.76 0.81 0.86 0.99 Outlet 80 m³/s 19.630 19.470 19.290 19.100 18.890 18.450 17.960 17.450 16.910 16.330 15.700 14.210 Inlet 81 66.4 66 28.70-14.980 W/(L/s) 0.66 0.68 0.69 0.70 0.72 0.75 0.79 0.83 0.87 0.92 0.97 1.08 Outlet 81 m³/s 9.30 9.08 8.81 8.49 8.16 7.40 6.36 Inlet 77 62.7 66 5.94 42.00 2.510 W/(L/s) 0.18 0.20 0.22 0.24 0.27 0.32 0.39 Outlet 76 m³/s 10.79 10.57 10.29 9.97 9.62 8.82 7.78 Inlet 72 62.4 65 7.30-2.510 W/(L/s) 0.22 0.24 0.26 0.28 0.31 0.36 0.43 Outlet 72 m³/s 8.88 8.52 8.03 7.46 6.77 Inlet 64 57.8 62 4.09-1.730 W/(L/s) 0.16 0.18 0.20 0.22 0.25 Outlet 63 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 61

REVOLUTION SLC Dimensional Data B A CASING TERMINAL BOX WITH ENTRY HOLE TO SUIT K CONDUIT FITTINGS D AIR-FLOW E HOLES F EQUI-SPACED ON G PCD C Fan Dia. A B C D E F G K Weight kg SLC315/4-3AC 315 375 300 218 8 10 355 20-16 SLC355/4-3AC 355 425 375 239 8 10 395 20-19 SLC400/4-1AC 400 475 400 262 8 12 450 20 34 - SLC450/2-1AC 450 530 375 287 8 12 500 20 34 - SLC450/2A-3AC 450 530 450 287 8 12 500 20-33 SLC450/4-1AC 450 530 375 287 8 12 500 20 35 - SLC450/4-3AC 450 530 375 287 8 12 500 20-35 SLC500/2A-3AC 500 585 400 312 12 12 560 20-72 SLC500/2B-3AC 500 585 450 312 12 12 560 20-71 SLC500/4 500 585 400 312 12 12 560 20 41 33 SLC560/2-3AC 560 645 570 342 12 12 620 25-96 SLC560/4 560 645 400 342 12 12 620 20 50 44 SLC630/4 630 715 400 377 12 12 690 20 53 58 SLC710/4A-3AC 710 795 450 420 16 12 770 20-70 SLC710/4B-3AC 710 795 450 420 16 12 770 25-77 SLC710/6A-3AC 710 795 450 420 16 12 770 20-45 SLC710/6B-3AC 710 795 450 420 16 12 770 20-61 SLC800/4A-3AC 800 885 450 465 16 12 860 25-75 SLC800/4B-3AC 800 885 570 465 16 12 860 25-101 SLC800/6A-3AC 800 885 450 465 16 12 860 20-75 SLC800/6B-3AC 800 885 450 465 16 12 860 25-75 SLC900/4A-3AC 900 1000 570 520 16 15 970 25-134 SLC900/4B-3AC 900 1000 710 554 16 15 970 32-206 SLC900/6A-3AC 900 1000 450 520 16 15 970 25-75 SLC900/6B-3AC 900 1000 570 520 16 15 970 25-135 SLC900/8-3AC 900 1000 450 520 16 15 970 25-107 SLC1000/4A-3AC 1000 1110 590 567 16 15 1070 25-159 SLC1000/4B-3AC 1000 1110 790 606 16 15 1070 32-239 SLC1000/4C-3AC 1000 1110 790 606 16 15 1070 32-263 SLC1000/6A-3AC 1000 1110 590 567 16 15 1070 25-127 SLC1000/6B-3AC 1000 1110 590 567 16 15 1070 25-159 SLC1000/8-3AC 1000 1110 590 567 16 15 1070 25-136 Dimensions are in mm. 1Ph 3Ph 62 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

REVOLUTION SLC Accessories Transformer Controller Impeller Side Guard Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) SLC400/4-1AC 149-TC18 078C-0400-C APK400Sl/003 060B-0400 061B-0400 063-0400-MAN150 062-003 SLC450/2-1AC - 078C-0450-C APK450Sl/003 060B-0450 061B-0450 063-0450-MAN150 062-003 SLC450/4-1AC - 078C-0450-C APK450Sl/003 060B-0450 061B-0450 063-0450-MAN150 062-003 SLC500/4A-1AC 149-TC18 078C-0500-C APK500Sl/003 060B-0500 061B-0500 063-0500-MAN150 062-003 SLC500/4B-1AC 149-TC18 078C-0500-C APK500Sl/003 060B-0500 061B-0500 063-0500-MAN150 062-003 SLC560/4A-1AC 149-TC18 078C-0560-C APK560Sl/003 060B-0560 061B-0560 063-0560-MAN150 062-003 SLC560/4B-1AC 149-TC18 078C-0560-C APK560Sl/003 060B-0560 061B-0560 063-0560-MAN150 062-003 SLC630/4-1AC 149-TC18 078C-0630-C APK630Sl/003 060B-0630 061B-0630 063-0630-MAN200 062-003 SLC630/4B-1AC 149-TC18 078C-0630-C APK630Sl/003 060B-0630 061B-0630 063-0630-MAN200 062-003 Damper Bell Mouth Inlet Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded Wiring Diagram SLC400/4-1AC 019-0400-STD 241B-0400-BELL 068-0400-1DEP 068-0400-1DENP 068-0400-2DEP 068-0400-2DENP 152-502 SLC450/2-1AC 019-0450-STD 241B-0450-BELL 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP 068-0450-2DENP 152-502 SLC450/4-1AC 019-0450-STD 241B-0450-BELL 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP 068-0450-2DENP 152-502 SLC500/4A-1AC 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-502 SLC500/4B-1AC 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-502 SLC560/4A-1AC 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-502 SLC560/4B-1AC 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-502 SLC630/4-1AC 019-0630-STD 241B-0630-BELL 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP 068-0630-2DENP 152-502 SLC630/4B-1AC 019-0630-STD 241B-0630-BELL 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP 068-0630-2DENP 152-502 * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 63

REVOLUTION SLC Accessories Transformer Controller Inverter Controller 1PH-3PH IP66 Inverter Controller 1PH-3PH IP20 Inverter Controller 3PH-3PH IP66 Inverter Controller 3PH-3PH IP20 Impeller Side Guard Ancillary Pack* Mounting Feet (each) SLC315/4-3AC 149-TC33 - - - - 078C-0315-C APK315Sl/002 060B-0315 SLC355/4-3AC 149-TC33 - - - - 078C-0350-C APK350Sl/002 060B-0355 SLC450/2A-3AC - 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 078C-0450-C APK450Sl/003 060B-0450 SLC450/4-3AC 149-TC33 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 078C-0450-C APK450Sl/003 060B-0450 SLC500/2A-3AC - - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 078C-0500-C APK500Sl/003 060B-0500 SLC500/2B-3AC - - - 149-ODE-2-34055-3KA4Y 149-ODE-2-34055-3KA42 078C-0500-C APK500Sl/003 060B-0500 SLC500/4A-3AC 149-TC35 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 078C-0500-C APK500Sl/003 060B-0500 SLC500/4B-3AC 149-TC33 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 078C-0500-C APK500Sl/003 060B-0500 SLC560/2-3AC - - - 149-ODE-2-34075-3KA4Y 149-ODE-2-34075-3KA42 078C-0560-C APK560Sl/003 060B-0560 SLC560/4A-3AC 149-TC35 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 078C-0560-C APK560Sl/003 060B-0560 SLC560/4B-3AC 149-TC35 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 078C-0560-C APK560Sl/003 060B-0560 SLC560/4C-3AC 149-TC35 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 078C-0560-C APK560Sl/003 060B-0560 SLC630/4A-3AC 149-TC35 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 078C-0630-C APK630Sl/003 060B-0630 SLC630/4B-3AC 149-TC310 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 078C-0630-C APK630Sl/003 060B-0630 SLC710/4A-3AC - - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 078C-0710-C APK710Sl/004 060B-0710 SLC710/4B-3AC - - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 078C-0710-C APK710Sl/004 060B-0710 SLC710/6A-3AC 149-TC33 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 078C-0710-C APK710Sl/003 060B-0710 SLC710/6B-3AC 149-TC310 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 078C-0710-C APK710Sl/003 060B-0710 SLC800/4A-3AC - - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 078C-0800-C APK800Sl/004 060B-0800 SLC800/4B-3AC - - - 149-ODE-2-34055-3KA4Y 149-ODE-2-34055-3KA42 078C-0800-C APK800Sl/004 060B-0800 SLC800/6A-3AC 149-TC310 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 078C-0800-C APK800Sl/003 060B-0800 SLC800/6B-3AC - - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 078C-0800-C APK800Sl/004 060B-0800 SLC900/4A-3AC - - - 149-ODE-2-34075-3KA4Y 149-ODE-2-34075-3KA42 078C-0900-C APK900Sl/005 060B-0900 SLC900/4B-3AC - - - - 149-ODE-2-34110-3KA42 078C-0900-C APK900Sl/006 060B-0900 SLC900/6A-3AC - - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 078C-0900-C APK900Sl/004 060B-0900 SLC900/6B-3AC - - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 078C-0900-C APK900Sl/004 060B-0900 SLC900/8-3AC - 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 078C-0900-C APK900Sl/005 060B-0900 SLC1000/4A-3AC - - - 149-ODE-2-34075-3KA4Y 149-ODE-2-34075-3KA42 078C-1000-C APK1000Sl/005 060B-1000 SLC1000/4B-3AC - - - - 149-ODE-2-34110-3KA42 078C-1000-C APK1000Sl/006 060B-1000 SLC1000/4C-3AC - - - - 149-ODV-34150-IN 078C-1000-C APK1000Sl/006 060B-1000 SLC1000/6A-3AC - - - 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 078C-1000-C APK1000Sl/005 060B-1000 SLC1000/6B-3AC - - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 078C-1000-C APK1000Sl/005 060B-1000 SLC1000/8-3AC - 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 078C-1000-C APK1000Sl/005 060B-1000 * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. 64 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

REVOLUTION SLC Accessories Matching Flanges (each) AV Flexible Mounts Connections (each) (set of 4) Damper Bell Mouth Inlet Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded Wiring Diagram SLC315/4-3AC 061B-0315 063-0315-MAN150 062-002 019-0315-STD 241B-0315 068-0315-1DEP 068-0315-1DENP 068-0315-2DEP 068-0315-2DENP 152-600 SLC355/4-3AC 061B-0355 063-0355-MAN150 062-002 019-0355-STD 241B-0355 068-0350-1DEP 068-0350-1DENP 068-0350-2DEP 068-0350-2DENP 152-600 SLC450/2A-3AC 061B-0450 063-0450-MAN150 062-003 019-0450-STD 241B-0450-BELL 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP 068-0450-2DENP 152-600 SLC450/4-3AC 061B-0450 063-0450-MAN150 062-003 019-0450-STD 241B-0450-BELL 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP 068-0450-2DENP 152-600 SLC500/2A-3AC 061B-0500 063-0500-MAN150 062-003 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-601 SLC500/2B-3AC 061B-0500 063-0500-MAN150 062-003 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-601 SLC500/4A-3AC 061B-0500 063-0500-MAN150 062-003 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-600 SLC500/4B-3AC 061B-0500 063-0500-MAN150 062-003 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-600 SLC560/2-3AC 061B-0560 063-0560-MAN150 062-003 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-601 SLC560/4A-3AC 061B-0560 063-0560-MAN150 062-003 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-600 SLC560/4B-3AC 061B-0560 063-0560-MAN150 062-003 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-600 SLC560/4C-3AC 061B-0560 063-0560-MAN150 062-003 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-600 SLC630/4A-3AC 061B-0630 063-0630-MAN200 062-003 019-0630-STD 241B-0630-BELL 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP 068-0630-2DENP 152-600 SLC630/4B-3AC 061B-0630 063-0630-MAN200 062-003 019-0630-STD 241B-0630-BELL 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP 068-0630-2DENP 152-600 SLC710/4A-3AC 061B-0710 063-0710-MAN200 062-004 019-0710-STD 241B-0710-BELL 068-0710-1DEP 068-0710-1DENP 068-0710-2DEP 068-0710-2DENP 152-600 SLC710/4B-3AC 061B-0710 063-0710-MAN200 062-004 019-0710-STD 241B-0710-BELL 068-0710-1DEP 068-0710-1DENP 068-0710-2DEP 068-0710-2DENP 152-601 SLC710/6A-3AC 061B-0710 063-0710-MAN200 062-003 019-0710-STD 241B-0710-BELL 068-0710-1DEP 068-0710-1DENP 068-0710-2DEP 068-0710-2DENP 152-600 SLC710/6B-3AC 061B-0710 063-0710-MAN200 062-003 019-0710-STD 241B-0710-BELL 068-0710-1DEP 068-0710-1DENP 068-0710-2DEP 068-0710-2DENP 152-600 SLC800/4A-3AC 061B-0800 063-0800-MAN200 062-004 019-0800-STD 241B-0800-BELL 068-0800-1DEP 068-0800-1DENP 068-0800-2DEP 068-0800-2DENP 152-601 SLC800/4B-3AC 061B-0800 063-0800-MAN200 062-004 019-0800-STD 241B-0800-BELL 068-0800-1DEP 068-0800-1DENP 068-0800-2DEP 068-0800-2DENP 152-601 SLC800/6A-3AC 061B-0800 063-0800-MAN200 062-003 019-0800-STD 241B-0800-BELL 068-0800-1DEP 068-0800-1DENP 068-0800-2DEP 068-0800-2DENP 152-600 SLC800/6B-3AC 061B-0800 063-0800-MAN200 062-004 019-0800-STD 241B-0800-BELL 068-0800-1DEP 068-0800-1DENP 068-0800-2DEP 068-0800-2DENP 152-601 SLC900/4A-3AC 061B-0900 063-0900-MAN200 062-005 019-0900-STD 241B-0900-BELL 068-0900-1DEP 068-0900-1DENP 068-0900-2DEP 068-0900-2DENP 152-601 SLC900/4B-3AC 061B-0900 063-0900-MAN200 062-006 019-0900-STD 241B-0900-BELL 068-0900-1DEP 068-0900-1DENP 068-0900-2DEP 068-0900-2DENP 152-601 SLC900/6A-3AC 061B-0900 063-0900-MAN200 062-004 019-0900-STD 241B-0900-BELL 068-0900-1DEP 068-0900-1DENP 068-0900-2DEP 068-0900-2DENP 152-601 SLC900/6B-3AC 061B-0900 063-0900-MAN200 062-004 019-0900-STD 241B-0900-BELL 068-0900-1DEP 068-0900-1DENP 068-0900-2DEP 068-0900-2DENP 152-601 SLC900/8-3AC 061B-0900 063-0900-MAN200 062-005 019-0900-STD 241B-0900-BELL 068-0900-1DEP 068-0900-1DENP 068-0900-2DEP 068-0900-2DENP 152-600 SLC1000/4A-3AC 061B-1000 063-1000-MAN250 062-005 019-1000-STD 241B-1000-BELL 068-1000-1DEP 068-1000-1DENP 068-1000-2DEP 068-1000-2DENP 152-601 SLC1000/4B-3AC 061B-1000 063-1000-MAN250 062-006 019-1000-STD 241B-1000-BELL 068-1000-1DEP 068-1000-1DENP 068-1000-2DEP 068-1000-2DENP 152-601 SLC1000/4C-3AC 061B-1000 063-1000-MAN250 062-006 019-1000-STD 241B-1000-BELL 068-1000-1DEP 068-1000-1DENP 068-1000-2DEP 068-1000-2DENP 152-601 SLC1000/6A-3AC 061B-1000 063-1000-MAN250 062-005 019-1000-STD 241B-1000-BELL 068-1000-1DEP 068-1000-1DENP 068-1000-2DEP 068-1000-2DENP 152-601 SLC1000/6B-3AC 061B-1000 063-1000-MAN250 062-005 019-1000-STD 241B-1000-BELL 068-1000-1DEP 068-1000-1DENP 068-1000-2DEP 068-1000-2DENP 152-601 SLC1000/8-3AC 061B-1000 063-1000-MAN250 062-005 019-1000-STD 241B-1000-BELL 068-1000-1DEP 068-1000-1DENP 068-1000-2DEP 068-1000-2DENP 152-600 Fan & inverter packages available. Please contact Elta Fans for more information. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 65

REVOLUTION SLC Notes 66 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

POWERPLUS SCPP Contra-Rotating Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 4 standard sizes from 450mm to 630mm. ü Air volume flow rates up to 4.6 m³/s. ü Static pressures up to 475 Pa. ü Ideal for internal or external use. ü Available in AC. CASING The all metal fan casing provides a long lasting and robust construction. The units have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing. All casing parts are heavy gauge mild steel sheet, roll formed and welded, then hot dip galvanised to BS EN ISO 1461:2009 after fabrication. IMPELLER Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium (LM6), natural finish. Impellers are factory set at an angle to provide maximum performance. The hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are to be dynamically balanced to ISO 14694 Grade G6.3. MOTORS Motors are highly efficient, lightweight induction motors with sealed for life, maintenance free ball bearings, which allows the fan to be installed at any angle. Each motor is matched to the aerodynamic performance of the impeller. Motors are Class F insulated to EN 60034-5, weatherproofed to IP55 and (excluding size 630) suitable for speed control. Each motor has integral thermal overload protection. Fans are suitable for operating temperatures between -20 C and +70 C fixed speed and -20 C and +50 C when used with a speed controller. Electrical connection to the motor is provided by an IP55 terminal box which is fitted onto the outer side of the fan casing. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCPP units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). ACCESSORIES For full accessories & controls information please visit eltaselect.com Transformer Controller : 149-TC Ancillary Pack : APK Mounting Feet : 060B Matching Flanges : 061B Flexible Connections : 063 MAN AV Mounts (Set of 4) : 062 00 Damper : 019 Bell Mouth Inlet : 241B Silencer : 068 DE*P(C) Impeller Side Guard : 078C TYPICAL APPLICATIONS Commercial Kitchens Sports Halls Industrial Units Warehousing Factories Schools Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 67

COMPACT POWERPLUS SCPP Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SCPP450/4-1AC 1465 SCPP500/4-1AC 1465 SCPP560/4-1AC 1375 SCPP630/4-1AC 1340 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % FMEG N Motor Electrical Data m³/s 2.070 2.028 1.988 1.948 1.904 1.801 1.675 1.538 1.382 - - - Inlet 67 52.7 59 4.01 0.900 W/(L/s) 0.32 0.34 0.35 0.37 0.40 0.45 0.51 0.58 0.66 - - - Outlet 68 m³/s 2.284 2.217 2.156 2.099 2.043 1.933 1.817 1.686 1.514 - - - Inlet 64 56.7 63 3.94 0.882 W/(L/s) 0.26 0.28 0.30 0.33 0.35 0.40 0.46 0.52 0.60 - - - Outlet 64 m³/s 2.938 2.888 2.836 2.782 2.724 2.599 2.456 2.290 2.097 1.868 1.580 - Inlet 65 52.6 58 6.17 1.364 W/(L/s) 0.35 0.37 0.38 0.40 0.42 0.47 0.52 0.58 0.65 0.75 0.88 - Outlet 65 m³/s 4.600 4.504 4.409 4.315 4.220 4.026 3.824 3.612 3.386 3.136 2.823 - Inlet 71 54.2 58 11.40 2.364 W/(L/s) 0.41 0.43 0.44 0.46 0.48 0.53 0.57 0.63 0.69 0.76 0.86 - Outlet - Peak Amps Input kw dba @ 3m Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 68 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

COMPACT POWERPLUS SCPP Dimensional Data E HOLES F EQUI- SPACED ON G PCD (BOTH FLANGES) 15 CASING TERMINAL BOX WITH ENTRY HOLE TO SUIT K CONDUIT FITTINGS D AIR-FLOW A B AIR-FLOW 1ST STAGE C 2ND STAGE Fan Dia A B C D E F G K Weight kg SCPP450/4-1AC 450 530 540 287 8 12 500 20 81 SCPP500/4-1AC 500 585 550 313 12 12 560 20 85 SCPP560/4-1AC 560 645 500 344 12 12 620 20 58 SCPP630/4-1AC 630 715 500 380 12 12 690 20 67 Dimensions are in mm. Accessories Transformer Controller Impeller Side Guard Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) SCPP450/4-1AC 149-TC110 078C-0450-C APK450Sl/003 060B-0450 061B-0450 063-0450-MAN150 062-003 SCPP500/4-1AC 149-TC110 078C-0500-C APK500Sl/003 060B-0500 061B-0500 063-0500-MAN150 062-003 SCPP560/4-1AC 149-TC110 078C-0560-C APK560Sl/003 060B-0560 061B-0560 063-0560-MAN150 062-003 SCPP630/4-1AC - 078C-0630-C APK630Sl/003 060B-0630 061B-0630 063-0630-MAN200 062-003 Damper Bell Mouth Inlet Silencer 1D Podded** Silencer 1D Unpodded** Silencer 2D Podded** Silencer 2D Unpodded** Wiring Diagram SCPP450/4-1AC 019-0450-STD 241B-0450-BELL 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP 068-0450-2DENP 152-510 SCPP500/4-1AC 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-510 SCPP560/4-1AC 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-510 SCPP630/4-1AC 019-0630-STD 241B-0630-BELL 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP 068-0630-2DENP 152-510 * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. ** Melinex lined silencers must be used to prevent grease impregnation into the acoustic media for kitchen extract applications as prescribed for kitchen ventilation systems. Contact Elta Fans for insertion losses for melinex lined silencers. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 69

COMPACT POWERPLUS SCPP Notes 70 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

POWERPLUS SPP Contra-Rotating Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 5 standard sizes from 450mm to 630mm. ü Air volume flow rates up to 3.96 m³/s. ü Static pressures up to 764 Pa. ü Suitable for operating temperatures up to +70 C. ü Available in AC. CASING The all metal fan casing provides a long lasting and robust construction. The units have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing. All casing parts are heavy gauge mild steel sheet, roll formed and welded for added strength and durability, hot dip galvanised to BS EN ISO 1461:2009 after fabrication and drilled to BS ISO 6580:2005. The fans are suitable for external mounting as standard. IMPELLER Adjustable pitch aerofoil impellers are provided with blades made from high quality die cast aluminium (LM6). Impellers are factory set at an angle to provide maximum performance and efficiency across the duty range. The hubs are manufactured from die cast aluminium alloy (LM24). All impellers are to be dynamically balanced to ISO 14694 Grade G6.3. MOTORS Motors are totally enclosed, airstream rated induction motors with sealed for life, maintenance free ball bearings, which allows the fan to be installed at any angle. Each motor is matched to the aerodynamic performance of the impeller. Motors are Class F insulated to EN 60034-5, protected to IP55 and suitable for inverter speed control. Motors are suitable for 230V Delta and 400V Star connection. Fans are suitable for operating temperatures between -20 C and +70 C. Electrical connection to the motor is provided by an IP55 terminal box which is fitted onto the outer side of the fan casing. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SPP units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Commercial Kitchens Restaurants and Cafés Shops and Retail Parks Sports Halls Industrial Units Warehousing Factories Schools ACCESSORIES For full accessories & controls information please visit eltaselect.com Inverter : 149-ODE Ancillary Pack : APK Mounting Feet : 060B Matching Flanges : 061B Flexible Connections : 063 MAN AV Mounts (Set of 4) : 062 00 Impeller Side Guard : 078C Damper : 019 Bell Mouth Inlet : 241B Silencer : 068 DE*P(C) Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 71

POWERPLUS SPP Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SPP450/4-3AC 1415 SPP500/4A-3AC 1455 SPP500/4B-3AC 1445 SPP560/4-3AC 1440 SPP630/4-3AC 1460 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 1.938 1.905 1.866 1.821 1.773 1.673 1.556 1.406 1.261 Inlet 69 51.1 58 2.0 0.797 W/(L/s) 0.30 0.32 0.35 0.37 0.40 0.45 0.51 0.59 0.68 Outlet 70 m³/s 2.377 2.324 2.276 2.229 2.181 2.079 1.963 1.828 1.679 1.519 1.317 Inlet 69 55.9 62 2.22 1.017 W/(L/s) 0.29 0.31 0.33 0.35 0.37 0.42 0.48 0.54 0.62 0.70 0.81 Outlet 67 m³/s 2.682 2.654 2.624 2.592 2.558 2.484 2.402 2.312 2.211 2.091 1.942 Inlet 66 53.4 58 3.20 1.620 W/(L/s) 0.42 0.43 0.45 0.47 0.49 0.54 0.59 0.65 0.71 0.78 0.88 Outlet 68 m³/s 2.886 2.850 2.813 2.776 2.739 2.661 2.578 2.488 2.385 2.264 2.113 1.641 Inlet 68 56.7 61 3.22 1.607 W/(L/s) 0.35 0.37 0.38 0.40 0.42 0.47 0.52 0.57 0.64 0.71 0.79 1.04 Outlet 70 m³/s 3.956 3.922 3.886 3.847 3.806 3.717 3.618 3.508 3.387 3.256 3.112 2.765 Inlet 73 62.6 66 4.61 2.351 W/(L/s) 0.35 0.37 0.38 0.40 0.42 0.46 0.51 0.56 0.61 0.67 0.74 0.88 Outlet 74 Dimensional Data E HOLES Ø F EQUI- SPACED ON G PCD (BOTH FLANGES) 15 CASING TERMINAL BOX WITH ENTRY HOLE TO SUIT Ø K CONDUIT FITTINGS AIRFLOW D Ø A INSIDE Ø B OUTSIDE FLANGE AIRFLOW L M 4 HOLES Ø11 N CRS P CRS MOUNTING FEET A 2ND STAGE C OVERALL 1ST STAGE A B C D E F G K L M N P Weight kg SPP450 450 530 500 285 8 12 500 20 280 255 400 439 42 SPP500 500 585 550 315 12 12 560 20 315 290 450 489 53 SPP560 560 645 550 345 12 12 620 20 355 330 510 480 59 SPP630 630 715 600 380 12 12 690 20 400 375 580 530 83 Dimensions are in mm. *Weight does not include mounting feet. Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 72 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

POWERPLUS SPP Accessories Inverter Controller 3PH-3PH IP66 Inverter Controller 3PH-3PH IP20 Inverter Controller 1PH-3PH IP66 Inverter Controller 1PH-3PH IP20 Impeller Side Guard Ancillary Pack* Mounting Feet (each) SPP450/4-3AC 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 078C-0450-C APK450SI/003 060B-0450 SPP500/4A-3AC 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 078C-0500-C APK500SI/003 060B-0500 SPP500/4B-3AC 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 078C-0500-C APK500SI/003 060B-0500 SPP560/4-3AC 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 078C-0560-C APK560SI/003 060B-0560 SPP630/4-3AC 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 078C-0630-C APK630SI/003 060B-0630 Mounting Flanges (each) Flexible Connections (each) AV Mounts (set of 4) Damper Bell Mouth Inlet Silencer 1D Podded** Silencer 1D Unpodded** Silencer 2D Podded** SPP450/4-3AC 061B-0450 063-0450-MAN150 062-003 019-0450-STD 241B-0450-BELL 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP SPP500/4A-3AC 061B-0500 063-0500-MAN150 062-003 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP SPP500/4B-3AC 061B-0500 063-0500-MAN150 062-003 019-0500-STD 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP SPP560/4-3AC 061B-0560 063-0560-MAN150 062-003 019-0560-STD 241B-0560-BELL 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP SPP630/4-3AC 061B-0630 063-0630-MAN200 062-003 019-0630-STD 241B-0630-BELL 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP Silencer 2D Unpodded** Wiring Diagram SPP450/4-3AC 068-0450-2DENP 152-600 SPP500/4A-3AC 068-0500-2DENP 152-600 SPP500/4B-3AC 068-0500-2DENP 152-600 SPP560/4-3AC 068-0560-2DENP 152-600 SPP630/4-3AC 068-0630-2DENP 152-600 Fan & inverter packages available. Please contact Elta Fans for more information. * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. ** Melinex lined silencers must be used to prevent grease impregnation into the acoustic media for kitchen extract applications as prescribed for kitchen ventilation systems. Contact Elta Fans for insertion losses for melinex lined silencers. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 73

POWERPLUS SPP Notes 74 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MINIFLOW SAMF Cased Axial Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 4 standard sizes from 150mm to 315mm. ü Air volume flow rates up to 0.55 m³/s. ü Static pressures up to 150 Pa. ü Suitable for operating temperatures up to +50 C. ü Available in AC. CASING The all metal fan casing provides a long lasting and robust construction. The units have been constructed from mild steel, with mounting brackets as an integral component. Both motors and axial impellers mounted within the length of the unit casing. All casing parts shall have a powder coated finish after manufacture, except the SAMF150/2-2 which has a die cast aluminium housing. IMPELLER The impeller is aerodynamically designed by combining the impeller with the rotor of the external rotor motor. Motor and impeller are balanced to ISO 14694 Grade G6.3. MOTORS External rotor motor, with sealed for life ball bearings, allowing the unit to be mounted at any angle. Motors shall be IP44 protected and Class B insulation. All units are suitable for a maximum of 80% R.H. and ambient operating temperatures up to +50 C. Motors are wound for 220V to 240V/1Ph/50Hz AC supply, with built in thermal overload protection, except the SAMF150/2-2 which is impedance protected. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SAMF units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Small commercial premises Kitchens (where there is not an outside wall to terminate a wall fan) ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-EL Mounting Brackets (each) : 060A SAMF Flexible Connections : 063 SAMF Clamps (each) : 018 CLAMP AV Mounts (Set of 4) : 062 00 Damper : 018 DAMPER Silencer : 068 JF Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 75

MINIFLOW SAMF Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SAMF150/2-2 2760 SAMF200/2-2 2580 SAMF200/4-2 1440 SAMF250/2-2 2605 SAMF250/4-2 1380 SAMF315/4-2 1320 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 Overall Efficiency % FMEG N Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.110 0.084 0.064 0.044 0.022 Inlet 43 7.5 <125W 0.25 0.046 W/(L/s) 0.45 0.58 0.77 1.12 2.13 Outlet - m³/s 0.239 0.208 0.171 0.135 0.107 Inlet 51 14.6 <125W 0.21 0.060 W/(L/s) 0.33 0.38 0.47 0.59 0.74 Outlet - m³/s 0.144 0.094 0.054 0.017 Inlet 37 8.2 <125W 0.13 0.030 W/(L/s) 0.25 0.39 0.67 1.98 Outlet - m³/s 0.450 0.433 0.404 0.339 0.268 0.142 Inlet 49 32.0 <125W 0.55 0.124 W/(L/s) 0.26 0.27 0.29 0.35 0.45 0.88 Outlet - m³/s 0.279 0.231 0.151 0.079 Inlet 40 12.6 <125W 0.21 0.050 W/(L/s) 0.26 0.31 0.49 0.93 Outlet - m³/s 0.556 0.442 0.281 0.162 0.082 Inlet 47 20.9 <125W 0.32 0.070 W/(L/s) 0.17 0.21 0.34 0.60 1.21 Outlet - Dimensional Data 2-MOUNTING BRACKETS WITH 8mm SLOTTED HOLE ON CENTRE LINE (EXCEPT SIZE 150) TERMINAL BOX B A D C 50 50 A B C D Weight kg SAMF150 147 165 - - 1.5 SAMF200 206 250 236 164 3.5 SAMF250 260 250 296 190 4.0 SAMF315 311 250 346 219 4.8 Dimensions are in mm. Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 76 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MINIFLOW SAMF Accessories Electronic Controller Mounting Brackets (each) Flexible Connections (each) Clamps (each) AV Mounts (set of 4) Damper SAMF150/2-2 149-EL31-063-0150-SAMF 018-0150-CLAMP 062-001 018-150-DAMPER SAMF200/2-2 149-EL31 060A-SAMF200-MB 063-0200-SAMF 018-0200-CLAMP 062-001 018-200-DAMPER SAMF200/4-2 149-EL31 060A-SAMF200-MB 063-0200-SAMF 018-0200-CLAMP 062-001 018-200-DAMPER SAMF250/2-2 149-EL31 060A-SAMF250-MB 063-0250-SAMF 018-0250-CLAMP 062-002 018-250-DAMPER SAMF250/4-2 149-EL31 060A-SAMF250-MB 063-0250-SAMF 018-0250-CLAMP 062-001 018-250-DAMPER SAMF315/4-2 149-EL31 060A-SAMF315-MB 063-0315-SAMF 018-0315-CLAMP 062-002 018-315-DAMPER Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram SAMF150/2-2 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-503 SAMF200/2-2 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-503 SAMF200/4-2 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-503 SAMF250/2-2 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-503 SAMF250/4-2 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-503 SAMF315/4-2 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-503 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 77

MINIFLOW SAMF Notes 78 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

JETFLOW HIT Centrifugal In-line Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 5 standard sizes from 150mm to 315mm. ü Air volume flow rates up to 0.51 m³/s. ü Static pressures up to 650 Pa. ü Suitable for operating temperatures up to +50 C. ü Available in AC. CASING HIT casings have a galvanised pressed sheet steel construction, providing a robust, long lasting and corrosion resistant casing. The inlet and outlet spigots should be a minimum of 25mm long to enable the installation and fixing to circular rigid, or flexible ductwork. All HIT units are to be supplied complete with integral mounting brackets manufactured from galvanised sheet steel for horizontal or vertical mounting arrangements. IMPELLER All impellers are single inlet backward curved centrifugal type. Impellers are balanced to ISO 14694 Grade G6.3. MOTORS All motors are to be highly efficient, three speed external rotor motors; matched to the aerodynamic performance of the impeller. Motors have sealed for life ball bearings to enable the fan to be mounted at any angle. Motors are protected to IP44 with Class F insulation; suitable for speed control and ambient operating temperatures up to +50 C with built in thermal overload protection. Non self-resetting thermal cut-outs are fitted in accordance with EN60335-2-80. Motors are wound for 230V/1Ph/50Hz/60Hz supply. Electrical connections are made by an IP54 terminal box fitted to the outside of the fan casing. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All HIT units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Variety of industrial, light commercial & domestic applications, including: Toilets Café Entrance Halls Duct Ventilation Boost Bathrooms Equipment Cooling Air Curtain Supply Restaurants ACCESSORIES For full accessories & controls information please visit eltaselect.com 3 Speed Switch : 149-MTS Flexible Connections : 018 FLEX Clamps (each) : 018 CLAMP Damper : 018 DAMPER Silencer : 068 JF Panel Filter : 018 FILT-P Electric Heater Battery : 018 HEA Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 79

JETFLOW HIT Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz HIT150 HIT160 HIT200 Speed r/min HIGH 2590 MED 2320 LOW 2180 HIGH 2500 MED 2170 LOW 2030 HIGH 2520 MED 2315 LOW 1420 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 50 100 150 200 250 300 350 400 450 500 Overall Efficiency % Motor Electrical Data Peak Amps SC Amps Input kw dba @ 3m Inlet 47 m³/s 0.130 0.120 0.108 0.094 0.078 0.060 0.039 0.001 25.2 0.28 0.99 0.065 Outlet 49 W/(L/s) 0.48 0.53 0.60 0.69 0.81 1.01 1.46 44.46 Breakout 43 Inlet 44 m³/s 0.112 0.101 0.081 0.065 0.051 0.036 0.015 20.7 0.26 0.90 - Outlet 45 W/(L/s) 0.46 0.54 0.68 0.83 1.00 1.29 2.46 Breakout 39 Inlet 38 m³/s 0.090 0.065 0.049 0.038 0.029 0.017 13.1 0.25 0.86 - Outlet 39 W/(L/s) 0.57 0.85 1.08 1.27 1.54 2.18 Breakout 35 Inlet 47 m³/s 0.129 0.117 0.104 0.090 0.075 0.058 0.034 0.006 25.0 0.28 0.98 0.064 Outlet 49 W/(L/s) 0.47 0.53 0.60 0.70 0.84 1.06 1.69 7.78 Breakout 43 Inlet 44 m³/s 0.110 0.097 0.081 0.064 0.047 0.028 0.009 20.2 0.24 0.84 - Outlet 45 W/(L/s) 0.43 0.52 0.64 0.79 1.02 1.54 3.70 Breakout 39 Inlet 38 m³/s 0.098 0.082 0.062 0.046 0.031 0.016 0.005 15.1 0.23 0.81 - Outlet 39 W/(L/s) 0.47 0.59 0.79 1.02 1.37 2.18 5.21 Breakout 35 Inlet 51 m³/s 0.254 0.240 0.225 0.207 0.187 0.165 0.139 0.109 0.075 0.038 28.1 0.71 2.49 0.159 Outlet 53 W/(L/s) 0.56 0.61 0.67 0.75 0.84 0.96 1.12 1.37 1.86 3.29 Breakout 47 Inlet 47 m³/s 0.220 0.197 0.165 0.134 0.109 0.089 0.071 0.054 18.4 0.61 2.13 - Outlet 48 W/(L/s) 0.54 0.64 0.81 1.03 1.24 1.43 1.65 1.96 Breakout 43 Inlet 42 m³/s 0.189 0.109 0.073 0.064 0.059 5.7 0.59 2.07 - Outlet 41 W/(L/s) 0.64 1.22 1.79 1.92 1.99 Breakout 36 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 80 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

JETFLOW HIT Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz HIT250 HIT250B HIT315 HIT315B Speed r/min HIGH 2400 MED 2290 LOW 1380 HIGH 2390 MED 2300 LOW 2090 HIGH 2270 MED 2010 LOW 1840 HIGH 2230 MED 2250 LOW 2140 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 50 100 150 200 250 300 350 400 450 500 m³/s 0.269 0.254 0.236 0.216 0.194 0.170 0.144 0.116 0.089 0.061 0.035 Overall Efficiency % Motor Electrical Data Peak Amps SC Amps Input kw 24.7 0.79 2.75 0.182 dba @ 3m Inlet 52 Outlet 56 W/(L/s) 0.58 0.63 0.70 0.79 0.92 1.06 1.24 1.45 1.76 2.30 3.56 Breakout 50 m³/s 0.229 0.213 0.182 0.130 0.103 0.086 0.072 0.059 0.046 15.3 0.73 2.55 0.167 Inlet 49 Outlet 52 W/(L/s) 0.64 0.72 0.89 1.26 1.54 1.78 2.01 2.29 2.71 Breakout 45 m³/s 0.194 0.146 0.075 0.064 0.055 0.048 0.041 0.033 5.5 0.68 2.38 0.156 Inlet 44 Outlet 47 W/(L/s) 0.74 1.04 1.95 2.23 2.47 2.71 3.01 3.47 Breakout 40 m³/s 0.311 0.290 0.268 0.241 0.208 0.173 0.141 0.115 0.090 0.066 0.040 25.2 0.79 2.75 0.182 Inlet 52 Outlet 56 W/(L/s) 0.51 0.57 0.63 0.73 0.87 1.04 1.22 1.41 1.65 2.04 3.00 Breakout 47 m³/s 0.241 0.205 0.144 0.111 0.093 0.078 0.066 0.054 0.043 0.030 16.1 0.66 2.30 0.150 Inlet 47 Outlet 50 W/(L/s) 0.59 0.71 1.04 1.31 1.52 1.71 1.92 2.18 2.56 3.29 Breakout 41 m³/s 0.190 0.128 0.077 0.061 0.051 0.043 0.035 0.028 0.021 9.8 0.59 2.06 0.134 Inlet 41 Outlet 42 W/(L/s) 0.69 1.04 1.68 2.03 2.33 2.66 3.06 3.61 4.52 Breakout 36 m³/s 0.312 0.291 0.262 0.227 0.191 0.158 0.128 0.099 0.071 0.045 0.021 22.2 0.80 2.79 0.184 Inlet 56 Outlet 56 W/(L/s) 0.50 0.56 0.66 0.79 0.95 1.14 1.37 1.67 2.14 3.07 5.80 Breakout 48 m³/s 0.260 0.214 0.148 0.113 0.090 0.072 0.056 0.041 0.027 13.0 0.69 2.41 0.152 Inlet 51 Outlet 51 W/(L/s) 0.53 0.67 1.02 1.32 1.60 1.93 2.34 2.96 4.11 Breakout 41 m³/s 0.217 0.134 0.073 0.051 0.038 0.029 6.8 0.59 2.07 0.136 Inlet 46 Outlet 47 W/(L/s) 0.59 1.01 1.78 2.40 2.99 3.66 Breakout 36 m³/s 0.517 0.489 0.457 0.417 0.369 0.313 0.261 0.219 0.183 0.152 0.124 29.5 1.19 4.18 0.275 Inlet 56 Outlet 58 W/(L/s) 0.44 0.49 0.55 0.62 0.73 0.88 1.04 1.20 1.38 1.58 1.83 Breakout 46 m³/s 0.485 0.449 0.399 0.331 0.267 0.222 0.187 0.157 0.130 24.5 1.10 3.86 0.251 Inlet 54 Outlet 56 W/(L/s) 0.44 0.49 0.58 0.75 0.94 1.11 1.27 1.44 1.64 Breakout 48 m³/s 0.449 0.412 0.344 0.247 0.200 0.167 0.140 0.115 0.090 20.1 1.04 3.65 0.236 Inlet 52 Outlet 54 W/(L/s) 0.46 0.52 0.66 0.95 1.15 1.33 1.52 1.75 2.07 Breakout 49 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 81

JETFLOW HIT Dimensional Data 2-HOLES IN EACH BRACKET SIZES 100-160, O4 SIZES 200-315, O5 B E G F 25 25 45 A DIA D DIA C A B C D E F G Weight kg HIT150 148 195 165 278 326 312 47 3.6 HIT160 158 195 165 278 326 312 47 3.6 HIT200 198 235 190 333 392 372 100 5.5 HIT250 & HIT250B HIT315 & HIT 315B 248 210 190 333 392 372 100 5.3 313 265 227 400 460 440 100 8.8 Dimensions are in mm. 82 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

JETFLOW HIT Accessories 3 Speed Switch Flexible Connections (each) Clamps (each) Damper Panel Filter Electric Heater Battery HIT150 149-MTS10 018-0150-FLEX 018-150-CLAMP 018-150-DAMPER 018-0150-FILT-P 018-0150-HEAT-1 HIT160 149-MTS10 018-0160-FLEX 018-160-CLAMP 018-160-DAMPER 018-0160-FILT-P 018-0160-HEAT-1 HIT200 149-MTS10 018-0200-FLEX 018-200-CLAMP 018-200-DAMPER 018-0200-FILT-P 018-0200-HEAT-1 HIT250 149-MTS10 018-0250-FLEX 018-250-CLAMP 018-250-DAMPER 018-0250-FILT-P 018-0250-HEAT-1 HIT250B 149-MTS10 018-0250-FLEX 018-250-CLAMP 018-250-DAMPER 018-0250-FILT-P 018-0250-HEAT-1 HIT315 149-MTS10 018-0315-FLEX 018-315-CLAMP 018-315-DAMPER 018-0315-FILT-P 018-0315-HEA1/3 HIT315B 149-MTS10 018-0315-FLEX 018-315-CLAMP 018-315-DAMPER 018-0315-FILT-P 018-0315-HEA1/3 Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram HIT150 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-529 HIT160 068-0160-JF1 068-0160-JF2 068-0160-JF3 068-0160-JF4 152-529 HIT200 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-529 HIT250 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-529 HIT250B 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-529 HIT315 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-529 HIT315B 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-529 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 83

JETFLOW HIT Notes 84 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

ISEO IMF In-Line Mixed Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit homevent.co.uk. QUICK FACTS ü Moulded mounting bracket for quick installation ü Double Insulated, no earth connections required ü Totally recyclable plastic components, environmentally friendly ü Reliability Sealed for life ball bearings ü Motors Two speed AC permanent capacitor induction type ü Impeller Mixed flow impeller for high performance & silent operation CASING The all plastic fan casing provides a long lasting shockproof and robust construction. The units are finished in white RAL 9010 and are UV resistant. IMPELLER Mixed flow impellers are provided with blades made from high quality plastic. MOTORS Two speed permanent capacitor totally enclosed induction type with integral thermal overload protection, mounted on sealed for life ball bearings. All fans are double insulated. QUALITY MANAGEMENT All units in the Elta range are designed and manufactured to procedures as defined in BS EN ISO 9001:2008. TYPICAL APPLICATIONS Variety of industrial, light commercial & domestic applications, including: Toilets Café Entrance Halls Duct Ventilation Boost Bathrooms Equipment Cooling Air Curtain Supply Restaurants For full accessories & controls information please contact Elta Fans Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 85

ISEO IMF Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz ISEO IMF 100 ISEO IMF 100T ISEO IMF 125 ISEO IMF 125T ISEO IMF 150 ISEO IMF 150T ISEO IMF 200 ISEO IMF 200T Speed r/min 2308 2151 2308 2151 2308 2151 2308 2151 2490 2340 2490 2340 2434 2226 2434 2226 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 m³/s 0.065 0.057 0.047 0.036 0.026 0.008 Overall Efficiency % FMEG Motor Electrical Data Peak Amps Input kw 12.4 <125W 0.15 0.027 dba @ 3m Inlet 47 Outlet 45 W/(L/s) 0.49 0.53 0.59 0.72 0.95 2.64 Break Out 41 m³/s 0.057 0.050 0.040 0.029 0.018 0.003 9.8 <125W 0.15 - Inlet 43 Outlet 41 W/(L/s) 0.56 0.60 0.68 0.88 1.32 6.85 Break Out 36 m³/s 0.065 0.057 0.047 0.036 0.026 0.008 12.4 <125W 0.15 0.027 Inlet 47 Outlet 45 W/(L/s) 0.49 0.53 0.59 0.72 0.95 2.64 Break Out 41 m³/s 0.057 0.050 0.040 0.029 0.018 0.003 9.8 <125W 0.15 - Inlet 43 Outlet 41 W/(L/s) 0.56 0.60 0.68 0.88 1.32 6.85 Break Out 36 m³/s 0.095 0.087 0.075 0.056 0.031 0.002 17.2 <125W 0.15 0.031 Inlet 44 Outlet 43 W/(L/s) 0.36 0.39 0.43 0.53 0.83 8.73 Break Out 41 m³/s 0.082 0.071 0.056 0.038 0.020 11.6 <125W 0.15 - Inlet 41 Outlet 38 W/(L/s) 0.41 0.46 0.55 0.72 1.17 Break Out 36 m³/s 0.095 0.087 0.075 0.056 0.031 0.002 17.2 <125W 0.15 0.031 Inlet 44 Outlet 43 W/(L/s) 0.36 0.39 0.43 0.53 0.83 8.73 Break Out 41 m³/s 0.082 0.071 0.056 0.038 0.020 11.6 <125W 0.15 - Inlet 41 Outlet 38 W/(L/s) 0.41 0.46 0.55 0.72 1.17 Break Out 36 m³/s 0.163 0.157 0.151 0.144 0.136 0.118 32.6 <125W 0.31 0.064 Inlet 49 Outlet 48 W/(L/s) 0.43 0.44 0.46 0.48 0.50 0.55 Break Out 45 m³/s 0.123 0.118 0.113 0.106 0.097 0.068 0.025 22.9 <125W 0.25 - Inlet 43 Outlet 43 W/(L/s) 0.48 0.49 0.52 0.54 0.57 0.70 1.52 Break Out 38 m³/s 0.163 0.157 0.151 0.144 0.136 0.118 32.6 <125W 0.31 0.064 Inlet 49 Outlet 48 W/(L/s) 0.43 0.44 0.46 0.48 0.50 0.55 Break Out 45 m³/s 0.123 0.118 0.113 0.106 0.097 0.068 0.025 22.9 <125W 0.25 - Inlet 43 Outlet 43 W/(L/s) 0.48 0.49 0.52 0.54 0.57 0.70 1.52 Break Out 38 m³/s 0.258 0.250 0.244 0.236 0.227 0.205 0.174 33.6 <125W 0.55 0.113 Inlet 53 Outlet 57 W/(L/s) 0.46 0.48 0.49 0.51 0.52 0.57 0.65 Break Out 50 m³/s 0.222 0.214 0.205 0.195 0.183 0.153 0.097 26.3 <125W 0.51 - Inlet 51 Outlet 53 W/(L/s) 0.47 0.49 0.51 0.54 0.57 0.64 0.85 Break Out 45 m³/s 0.258 0.250 0.244 0.236 0.227 0.205 0.174 33.6 <125W 0.55 0.113 Inlet 53 Outlet 57 W/(L/s) 0.46 0.48 0.49 0.51 0.52 0.57 0.65 Break Out 50 m³/s 0.222 0.214 0.205 0.195 0.183 0.153 0.097 26.3 <125W 0.51 - Inlet 51 Outlet 53 W/(L/s) 0.47 0.49 0.51 0.54 0.57 0.64 0.85 Break Out 45 Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 86 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

ISEO IMF Dimensional Data G H B øf øa D E C A B C D E F G H ISEO IMF 100 97 296 179 104 113 174 154 139.6 ISEO IMF 125 124 256 179 102 113 174 154 139.6 ISEO IMF 150 147 300 195 112 127 194 182 170 ISEO IMF 200 198 314 254 126 145 220 236 120 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 87

ISEO IMF Notes 88 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MULTIFLOW SEM Mixed Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 5 standard sizes from 150mm to 400mm. ü Air volume flow rates up to 0.918 m³/s. ü Static pressures up to 660 Pa (AC). ü Suitable for operating temperatures up to +60 C. ü Extensive stock range available. ü Available in AC and EC. CASING Shockproof, heat resistant plastic, long lasting, robust, non-corrosive construction, IPX4. MOTORS Three speed AC induction motor with an in-built thermostatic switch. IMPELLER High efficiency diagonal mixed flow impeller with three dimensional guide vanes. INSTALLATION Removable fan section. IP44 terminal box. Suitable for installation at any angle. QUALITY MANAGEMENT Commitment to quality runs deep within Elta, as with all of our building services products the Multiflow SEM range is designed and manufactured with procedures as defined in BS EN ISO 9001:2008 and tested to ISO 5801:2007 (airside performance) and EN 150 3741:2011-01 (sound performance). OPERATING TEMPERATURE AC units from -25 C to +60 C (model dependent). ACCESSORIES For full accessories & controls information please visit eltaselect.com 3 Speed Controller : 149 MTS Fast Clamps : 018 CLAMP Panel Filter : 018 FILT-P Silencer : 068 JF Electric Heater Battery : 018 HEA Matching Flanges : 061B Damper : 018 DAMPER Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 89

MULTIFLOW SEM Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SEM150/2-1AC 2730 SEM200/2-1AC 2740 SEM250/2-1AC 2822 SEM315/2-1AC 2778 SEM400/4-1AC 1414 Airflow SFP Airflow m³/s @static Pressure Pa 0 25 50 75 100 150 200 250 300 350 400 500 At Best Efficiency Point Overall Efficiency % FMEG N Input kw Peak Amps dba @ 3m m³/s 0.169 0.157 0.148 0.139 0.129 0.091 0.021 Inlet 46 31.0 <125W 0.046 0.30 Outlet 45 W/(L/s) 0.26 0.28 0.31 0.33 0.36 0.47 1.86 Breakout 35 m³/s 0.341 0.325 0.312 0.300 0.288 0.263 0.230 0.098 0.057 0.023 Inlet 50 40.9 <125W 0.117 0.60 Outlet 53 W/(L/s) 0.32 0.34 0.36 0.38 0.40 0.45 0.50 0.91 1.65 4.13 Breakout 37 m³/s 0.453 0.441 0.430 0.418 0.406 0.382 0.355 0.321 0.125 0.080 0.048 Inlet 53 46.0 64.6 0.168 0.80 Outlet 57 W/(L/s) 0.34 0.35 0.36 0.38 0.39 0.43 0.48 0.53 1.04 1.68 2.94 Breakout 39 m³/s 0.885 0.872 0.859 0.845 0.830 0.800 0.768 0.732 0.693 0.647 0.584 0.210 Inlet 60 52.5 66.9 0.421 2.00 Outlet 63 W/(L/s) 0.44 0.45 0.46 0.47 0.49 0.52 0.55 0.59 0.63 0.68 0.73 1.60 Breakout 45 m³/s 0.918 0.884 0.848 0.809 0.769 0.672 0.233 0.101 Inlet 49 47.5 65.3 0.208 1.00 Outlet 53 W/(L/s) 0.21 0.22 0.23 0.25 0.27 0.32 0.74 1.78 Breakout 35 AVAILABLE IN EC The Multiflow SEM is available in EC models on request. Please contact us for more information. Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 90 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MULTIFLOW SEM Dimensional Data Ø F G D E Ø A H C B A B C D E F G H Weight kg SEM150 150 309 138 108 130 204 94 100 2 SEM200 200 325 163 129 151 246 120 125 4 SEM250 250 215 169 136 163 263 80 125 6 SEM315 315 300 284 167 200 327 210 264 12 SEM400 400 350 350 211 247 411 225 330 16 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 91

MULTIFLOW SEM Accessories 3 Speed Controller Clamps (each) Damper Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long SEM150/2-1AC MTS10 018-150-CLAMP 018-150-DAMPER 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 SEM200/2-1AC MTS10 018-200-CLAMP 018-200-DAMPER 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 SEM250/2-1AC MTS10 018-250-CLAMP 018-250-DAMPER 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 SEM315/2-1AC MTS10 018-315-CLAMP 018-315-DAMPER 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 SEM400/4-1AC MTS10 018-400-CLAMP 018-400-DAMPER 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 Panel Filter Electric Heater Battery Wiring Diagram SEM150/2-1AC 018-0150-FILT-P 018-0150-HEAT-1 152-543 SEM200/2-1AC 018-0200-FILT-P 018-0200-HEAT-1 152-543 SEM250/2-1AC 018-0250-FILT-P 018-0250-HEAT-1 152.543 SEM315/2-1AC 018-0315-FILT-P 018-0315-HEAT-1 152-543 SEM400/4-1AC 018-0400-FILT-P 018-0400-HEAT-1 152-543 92 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MULTIFLOW SEM Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 93

MULTIFLOW SEL Mixed Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 8 standard sizes from 250mm to 630mm. ü Air volume flow rates up to 3.88 m³/s (AC). ü Static pressures up to 1270 Pa (AC). ü Suitable for operating temperatures up to +80 C. ü Extensive stock range available. ü Available in AC and EC. CASING Manufactured from all weather galvanised steel, heat resistant plastic or seawater resistant aluminium (sizes over 400mm), IPX4. MOTORS AC single phase units are suitable for transformer control. IMPELLER High efficiency diagonal mixed flow impeller with three dimensional guide vanes. INSTALLATION Integral mounting bracket. IP44 terminal box. Suitable for installation at any angle. OPERATING TEMPERATURE From -25 C to +80 C (model dependent). QUALITY MANAGEMENT Commitment to quality runs deep within Elta, as with all of our building services products the Multiflow SEL range is designed and manufactured with procedures as defined in BS EN ISO 9001:2008 and tested to ISO 5801:2007 (airside performance) and EN 150 3741:2011-01 (sound performance). ACCESSORIES For full accessories & controls information please visit eltaselect.com Transformer Controller : 149-TC Fast Clamps : 018 CLAMP Panel Filter : 018 FILT-P Silencer : 068 JF Electric Heater Battery : 018 HEA Matching Flanges : 061B Damper : 018 DAMPER 94 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MULTIFLOW SEL Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Image Speed r/min SEL250/2-1AC 2684 SEL315/2B-1AC 2776 SEL315/2A-1AC 2819 SEL355/2-1AC 2776 SEL355/4-1AC 1438 SEL400/4-1AC 1440 SEL450/4-1AC 1435 SEL500/4-1AC 1352 SEL560/4-1AC 1401 SEL630/4-1AC 1371 Airflow SFP Airflow m³/s @static Pressure Pa 0 25 50 75 100 150 200 250 300 350 400 500 At Best Efficiency Point Overall Efficiency % FMEG N Input kw Peak Amps dba @ 3m Inlet 51 m³/s 0.453 0.442 0.431 0.419 0.407 0.380 0.350 0.313 0.108 0.064 0.031 46.9 65.7 0.162 0.70 Outlet 53 W/(L/s) 0.33 0.34 0.35 0.37 0.38 0.42 0.47 0.52 1.14 2.07 4.48 Breakout 29 Inlet 55 m³/s 0.975 0.963 0.951 0.938 0.924 0.894 0.862 0.828 0.791 0.750 0.703 0.230 52.7 66.2 0.515 2.40 Outlet 61 W/(L/s) 0.50 0.51 0.52 0.53 0.54 0.57 0.60 0.63 0.67 0.71 0.76 1.66 Breakout 40 Inlet 54 m³/s 0.654 0.644 0.633 0.621 0.608 0.579 0.545 0.506 0.459 0.388 0.150 0.057 50.8 67.4 0.263 1.20 Outlet 58 W/(L/s) 0.39 0.40 0.40 0.42 0.43 0.46 0.50 0.55 0.60 0.66 1.36 4.03 Breakout 37 Inlet 59 m³/s 1.372 1.358 1.344 1.330 1.315 1.283 1.250 1.215 1.177 1.137 1.093 0.988 50.5 61.2 0.955 4.30 Outlet 63 W/(L/s) 0.64 0.65 0.66 0.67 0.68 0.70 0.73 0.77 0.81 0.85 0.89 0.99 Breakout 42 Inlet 43 m³/s 0.714 0.691 0.663 0.629 0.590 0.484 0.098 0.030 46.8 66 0.150 0.70 Outlet 45 W/(L/s) 0.20 0.21 0.22 0.24 0.26 0.31 1.28 4.60 Breakout 26 Inlet 49 m³/s 0.957 0.930 0.900 0.866 0.825 0.700 0.287 0.135 0.053 45.8 63.4 0.211 0.90 Outlet 53 W/(L/s) 0.20 0.21 0.23 0.24 0.26 0.31 0.60 1.35 3.68 Breakout 39 Inlet 50 m³/s 1.445 1.414 1.380 1.345 1.307 1.223 1.119 0.959 0.265 0.159 0.063 50.0 64.2 0.445 2.40 Outlet 55 W/(L/s) 0.29 0.30 0.31 0.32 0.33 0.37 0.41 0.46 1.37 2.41 6.41 Breakout 44 Inlet 54 m³/s 1.950 1.902 1.857 1.814 1.772 1.685 1.591 1.479 1.315 0.343 0.196 48.7 60.5 0.747 3.30 Outlet 55 W/(L/s) 0.34 0.35 0.36 0.37 0.39 0.42 0.46 0.50 0.56 1.68 3.15 Breakout 46 Inlet 61 m³/s 2.645 2.610 2.571 2.530 2.485 2.380 2.253 2.094 1.883 1.491 0.693 0.339 49.0 59.3 1.035 5.50 Outlet 64 W/(L/s) 0.38 0.39 0.40 0.41 0.42 0.45 0.49 0.53 0.57 0.66 1.23 2.72 Breakout 54 Inlet 62 m³/s 3.887 3.831 3.775 3.717 3.660 3.544 3.425 3.304 3.176 3.039 2.887 2.447 55.3 62.3 2.140 9.60 Outlet 64 W/(L/s) 0.49 0.50 0.51 0.52 0.53 0.55 0.58 0.62 0.66 0.70 0.74 0.86 Breakout 53 AVAILABLE IN EC The Multiflow SEL is available in EC models on request. Please contact us for more information. Also available in AC three phase, complete with controls and supplied as a package. Please contact us for more information Data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 95

MULTIFLOW SEL Dimensional Data Ø E F D Ø A G C B ø A B C D ø E F G Weight kg SEL250/2-1AC 250 215 245 132 254 90 220 5 SEL315/2B-1AC 315 351 332 164 319 160 260 15 SEL315/2A-1AC 315 308 311 161 315 120 239 8 SEL355/2-1AC 355 396 371 184 358 175 300 17 SEL355/4-1AC 355 396 371 184 358 175 300 14 SEL400/4-1AC 400 417 352 229 407 220 275 13 SEL450/4-1AC 450 467 402 239 457 250 310 18 SEL500/4-1AC 500 516 443 259 507 250 360 23 SEL560/4-1AC 560 582 468 289 568 250 440 38 SEL630/4-1AC 630 654 583 324 638 290 490 43 Dimensions are in mm. 96 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MULTIFLOW SEL Accessories Transformer Controller Clamps (each) Damper Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long SEL250/2-1AC 149-TC12 018-250-CLAMP 018-250-DAMPER 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 SEL315/2B-1AC 149-TC14 018-315-CLAMP 018-315-DAMPER 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 SEL315/2A-1AC 149-TC14 018-315-CLAMP 018-315-DAMPER 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 SEL355/2-1AC 149-TC18 018-355-CLAMP 018-355-DAMPER 068-0355-JF1 068-0355-JF2 068-0355-JF3 068-0355-JF4 SEL355/4-1AC 149-TC12 018-355-CLAMP 018-355-DAMPER 068-0355-JF1 068-0355-JF2 068-0355-JF3 068-0355-JF4 SEL400/4-1AC 149-TC14 018-400-CLAMP 018-400-DAMPER 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 SEL450/4-1AC 149-TC14 018-450-CLAMP - 068-0450-1DENP 068-0450-2DENP - - SEL500/4-1AC 149-TC18 018-0500-CLAMP - 068-0500-1DENP 068-0500-2DENP - - SEL560/4-1AC 149-TC110 018-0560-CLAMP - 068-0560-1DENP 068-0560-2DENP - - SEL630/4-1AC 149-TC116 018-630-CLAMP - 068-0630-1DENP 068-0630-2DENP - - Panel Filter Electric Heater Battery Wiring Diagram SEL250/2-1AC 018-0250-FILT-P 018-0250-HEAT-1 152-539 SEL315/2B-1AC 018-0315-FILT-P 018-0315-HEAT-1 152-540 SEL315/2A-1AC 018-0315-FILT-P 018-0315-HEAT-1 152-540 SEL355/2-1AC 018-0355-FILT-P 018-0355-HEAT-1 152-540 SEL355/4-1AC 018-0355-FILT-P 018-0355-HEAT-1 152-540 SEL400/4-1AC 018-0400-FILT-P 018-0400-HEAT-1 152-541 SEL450/4-1AC 018-0450-FILT-P - 152-542 SEL500/4-1AC 018-0500-FILT-P - 152-542 SEL560/4-1AC 018-0560-FILT-P - 152-542 SEL630/4-1AC 018-0250630-FILT-P - 152-542 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 97

MULTIFLOW SEL Notes 98 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

HIDEAWAY SH Centrifugal Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 6 standard sizes from 100mm to 315mm. ü Air volume flow rates up to 0.374 m³/s (AC) 0.37 m³/s (EC). ü Static pressures up to 690 Pa (AC) 900 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Available in AC & EC. CASING The robust 1.2mm galvanised mild steel sheet casing, is treated internally with a Class O rated (BS 476 Parts 6 and 7) fire resistant acoustic foam lining with a fire resistant polymeric coating. The casing is specially manufactured using integral motor mounting plates to provide additional rigidity for the casings. Each casing provides spigots to suit standard circular ducting. EPDM (Ethylene Propylene) rubber U shaped seals (being ozone and UV stable) are used to ensure a good seal back to the duct that is to be attached. A removable lid is provided as a standard feature to facilitate ease of maintenance and cleaning. IMPELLER High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor. MOTORS The single range of units may have either an EC or AC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability. All motors are suitable for use in ambient air conditions up to +60 C. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SH units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Bathroom and Kitchen Extract in Apartments Hotels Residential Properties Libraries Offices ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-POT Transformer Controller :149-TC Flexible Connections : 018 FLEX Clamps (each) : 018 CLAMP Damper : 018 DAMPER Silencer : 068 JF Panel Filter : 018 FILT-P Electric Heater Battery : 018 HEA Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 99

HIDEAWAY SH Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SH125-1ACL 2525 SH150-1ACL 2500 SH200-1ACL 2515 SH250-1ACL 2506 SH315-1ACL 2715 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps SC Amps Input kw dba @ 3m m³/s 0.098 0.094 0.090 0.086 0.082 0.073 0.063 0.051 0.037 0.018 Inlet 52 18.7 0.33-0.070 Outlet 52 W/(L/s) 0.74 0.77 0.80 0.83 0.87 0.97 1.11 1.33 1.77 3.25 Breakout 41 Inlet 51 m³/s 0.115 0.109 0.103 0.098 0.093 0.083 0.071 0.057 0.039 0.018 20.6 0.33-0.071 Outlet 53 W/(L/s) 0.63 0.66 0.70 0.73 0.77 0.86 1.00 1.23 1.70 3.28 Breakout 44 Inlet 54 m³/s 0.206 0.200 0.194 0.186 0.178 0.158 0.134 0.110 0.087 0.065 0.042 25.3 0.50-0.109 Outlet 56 W/(L/s) 0.49 0.53 0.57 0.60 0.64 0.71 0.82 0.99 1.22 1.55 2.17 Breakout 49 Inlet 53 m³/s 0.247 0.238 0.227 0.217 0.206 0.184 0.160 0.135 0.109 0.082 0.054 26.1 0.57 0.97 0.137 Outlet 54 W/(L/s) 0.49 0.51 0.54 0.57 0.60 0.69 0.81 0.96 1.17 1.49 2.13 Breakout 48 Inlet 50 m³/s 0.374 0.366 0.357 0.348 0.339 0.321 0.301 0.280 0.258 0.234 0.208 0.149 31.8 1.14 1.70 0.262 Outlet 51 W/(L/s) 0.61 0.63 0.66 0.68 0.71 0.77 0.84 0.92 1.01 1.12 1.26 1.67 Breakout 46 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 100 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

HIDEAWAY SH Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SH100-1ECL SH125-1ECL SH150-1ECL SH200-1ECL Contol Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 58 m³/s 0.118 0.115 0.113 0.110 0.107 0.102 0.097 0.092 0.087 0.081 0.075 0.061 31.0 1.14 0.128 Outlet 58 W/(L/s) 1.15 1.18 1.21 1.24 1.27 1.33 1.39 1.45 1.52 1.61 1.71 2.03 Breakout 48 Inlet - m³/s 0.103 0.100 0.098 0.095 0.092 0.088 0.083 0.078 0.073 0.068 0.063 0.050 31.7 0.87 - Outlet - W/(L/s) 0.96 0.98 1.00 1.03 1.05 1.11 1.18 1.25 1.35 1.46 1.60 2.05 Breakout - Inlet - m³/s 0.062 0.060 0.056 0.053 0.048 0.039 0.030 0.023 0.016 0.008 23.6 0.33 - Outlet - W/(L/s) 0.49 0.52 0.55 0.60 0.65 0.84 1.11 1.55 2.33 4.43 Breakout - Inlet - m³/s 0.020 0.009 3.5 0.07 - Outlet - W/(L/s) 0.43 0.94 Breakout - Inlet 60 m³/s 0.133 0.131 0.129 0.126 0.124 0.120 0.115 0.109 0.103 0.097 0.089 0.071 33.9 1.11 0.132 Outlet 61 W/(L/s) 1.00 1.01 1.03 1.04 1.06 1.10 1.14 1.20 1.27 1.36 1.47 1.85 Breakout 53 Inlet - m³/s 0.113 0.111 0.110 0.108 0.107 0.103 0.098 0.092 0.085 0.078 0.071 0.055 35.2 0.86 - Outlet - W/(L/s) 0.86 0.87 0.88 0.89 0.91 0.94 0.99 1.06 1.14 1.25 1.38 1.82 Breakout - Inlet - m³/s 0.073 0.069 0.065 0.060 0.055 0.044 0.032 0.022 0.013 0.006 25.7 0.32 - Outlet - W/(L/s) 0.41 0.44 0.47 0.51 0.57 0.73 1.02 1.56 2.72 6.38 Breakout - Inlet - m³/s 0.022 0.012 2.5 0.07 - Outlet - W/(L/s) 0.44 0.75 Breakout - Inlet 60 m³/s 0.159 0.155 0.152 0.149 0.146 0.140 0.134 0.127 0.121 0.114 0.106 0.087 38.1 1.20 0.136 Outlet 60 W/(L/s) 0.77 0.81 0.85 0.89 0.92 0.99 1.05 1.11 1.18 1.25 1.33 1.55 Breakout 54 Inlet - m³/s 0.139 0.135 0.132 0.128 0.124 0.115 0.107 0.099 0.090 0.082 0.073 0.053 36.9 0.83 - Outlet - W/(L/s) 0.70 0.70 0.71 0.72 0.73 0.77 0.83 0.91 1.01 1.14 1.30 1.84 Breakout - Inlet - m³/s 0.086 0.079 0.073 0.066 0.059 0.043 0.030 0.020 0.012 26.6 0.30 - Outlet - W/(L/s) 0.33 0.38 0.42 0.46 0.51 0.69 1.01 1.56 2.85 Breakout - Inlet - m³/s 0.026 0.007 3.8 0.07 - Outlet - W/(L/s) 0.34 1.28 Breakout - Inlet 60 m³/s 0.291 0.287 0.282 0.277 0.272 0.259 0.245 0.229 0.213 0.197 0.182 0.154 38.7 1.83 0.232 Outlet 63 W/(L/s) 0.79 0.80 0.81 0.82 0.84 0.88 0.94 1.01 1.09 1.18 1.28 1.51 Breakout 58 Inlet - m³/s 0.263 0.253 0.243 0.234 0.225 0.209 0.193 0.178 0.164 0.150 0.136 0.108 41.0 1.42 - Outlet - W/(L/s) 0.64 0.64 0.65 0.66 0.68 0.72 0.77 0.84 0.93 1.03 1.15 1.49 Breakout - Inlet - m³/s 0.156 0.146 0.135 0.122 0.107 0.081 0.061 0.046 0.032 0.020 0.008 32.3 0.50 - Outlet - W/(L/s) 0.29 0.30 0.33 0.37 0.42 0.56 0.77 1.09 1.63 2.78 6.80 Breakout - Inlet - m³/s 0.054 0.024 0.001 7.4 0.09 - Outlet - W/(L/s) 0.19 0.44 7.53 Breakout - A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 101

HIDEAWAY SH Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SH250-1ECL SH315-1ECL Contol Voltage 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 58 m³/s 0.314 0.310 0.305 0.301 0.296 0.285 0.273 0.260 0.245 0.228 0.209 0.165 41.7 1.85 0.235 Outlet 60 W/(L/s) 0.68 0.70 0.71 0.73 0.74 0.78 0.82 0.87 0.94 1.02 1.12 1.41 Breakout 56 Inlet - m³/s 0.287 0.282 0.276 0.270 0.263 0.246 0.227 0.204 0.179 0.156 0.135 0.099 41.6 1.33 - Outlet - W/(L/s) 0.57 0.58 0.58 0.59 0.60 0.63 0.67 0.74 0.85 0.99 1.16 1.62 Breakout - Inlet - m³/s 0.177 0.167 0.155 0.140 0.123 0.086 0.059 0.040 0.025 0.013 34.4 0.43 - Outlet - W/(L/s) 0.27 0.28 0.30 0.33 0.37 0.54 0.82 1.28 2.13 4.23 Breakout - Inlet - m³/s 0.060 0.019 6.5 0.08 - Outlet - W/(L/s) 0.17 0.54 Breakout - Inlet 53 m³/s 0.372 0.358 0.346 0.334 0.322 0.298 0.271 0.239 0.203 0.169 0.142 0.104 36.5 1.91 0.193 Outlet 52 W/(L/s) 0.57 0.59 0.60 0.62 0.64 0.68 0.74 0.82 0.95 1.14 1.37 1.95 Breakout 51 Inlet - m³/s 0.309 0.298 0.285 0.272 0.257 0.223 0.186 0.149 0.118 0.094 0.075 0.047 37.5 1.20 - Outlet - W/(L/s) 0.40 0.41 0.43 0.45 0.47 0.53 0.63 0.79 1.02 1.32 1.70 2.89 Breakout - Inlet - m³/s 0.193 0.172 0.146 0.115 0.087 0.048 0.022 28.9 0.36 - Outlet - W/(L/s) 0.20 0.22 0.25 0.32 0.42 0.81 1.90 Breakout - Inlet - m³/s 0.072 0.009 6.1 0.08 - Outlet - W/(L/s) 0.15 1.07 Breakout - A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 102 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

HIDEAWAY SH Dimensional Data CABLE ENTRY E G CTRS D C A F CTRS B A B C D E F G Weight kg SH100 400 300 166 100 83 300 325 10 SH125 400 300 166 125 83 300 325 10 SH150 400 300 182 150 91 300 325 10 SH200 424 350 231 200 115.5 300 375 12 SH250 452 350 281 250 140 300 375 14 SH315 430 400 340 315 170 300 426 16 Dimensions are in mm. Accessories Transformer Controller Flexible Connections (each) Clamps (each) Damper Panel Filter Electric Heater Battery Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram SH125-1ACL 149-TC12 018-0125-FLEX 018-125-CLAMP 018-125-DAMPER 018-0125-FILT-P 018-0125-HEAT-1 068-0125-JF1 068-0125-JF2 068-0125-JF3 068-0125-JF4 152-177 SH150-1ACL 149-TC12 018-0150-FLEX 018-150-CLAMP 018-150-DAMPER 018-0150-FILT-P 018-0150-HEAT-1 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-177 SH200-1ACL 149-TC12 018-0200-FLEX 018-200-CLAMP 018-200-DAMPER 018-0200-FILT-P 018-0200-HEAT-1 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-177 SH250-1ACL 149-TC12 018-0250-FLEX 018-250-CLAMP 018-250-DAMPER 018-0250-FILT-P 018-0250-HEAT-1 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-177 SH315-1ACL 149-TC12 018-0315-FLEX 018-315-CLAMP 018-315-DAMPER 018-0315-FILT-P 018-0315-HEAT-1 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-177 Electronic Controller Flexible Connections (each) Clamps (each) Damper Panel Filter Electric Heater Battery Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram SH100-1ECL 149-POT-10 018-0100-FLEX 018-100-CLAMP 018-100-DAMPER 018-0100-FILT-P 018-0100-HEAT-1 068-0100-JF1 068-0100-JF2 068-0100-JF3 068-0100-JF4 152-00036 SH125-1ECL 149-POT-10 018-0125-FLEX 018-125-CLAMP 018-125-DAMPER 018-0125-FILT-P 018-0125-HEAT-1 068-0125-JF1 068-0125-JF2 068-0125-JF3 068-0125-JF4 152-00036 SH150-1ECL 149-POT-10 018-0150-FLEX 018-150-CLAMP 018-150-DAMPER 018-0150-FILT-P 018-0150-HEAT-1 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-00036 SH200-1ECL 149-POT-10 018-0200-FLEX 018-200-CLAMP 018-200-DAMPER 018-0200-FILT-P 018-0200-HEAT-1 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-00036 SH250-1ECL 149-POT-10 018-0250-FLEX 018-250-CLAMP 018-250-DAMPER 018-0250-FILT-P 018-0250-HEAT-1 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-00036 SH315-1ECL 149-POT-10 018-0315-FLEX 018-315-CLAMP 018-315-DAMPER 018-0315-FILT-P 018-0315-HEAT-1 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-00036 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 103

HIDEAWAY SH Notes 104 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SINGLEFLOW SSD Centrifugal Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 8 standard sizes from 100mm to 500mm. ü Air volume flow rates up to 1.867 m³/s (AC) / 1.789 m³/s (EC). ü Static pressures up to 640 Pa (AC) and 930 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Available in AC & EC. CASING Robust 1.2mm galvanised mild steel sheet casing. The casing is specially manufactured using integral motor mounting plates to provide additional rigidity for the casings. Each casing provides spigots to suit standard circular ducting. EPDM (Ethylene Propylene) rubber U shaped seals (being ozone and UV stable) are used to ensure a good seal back to the duct that is to be attached. Top & bottom access is provided as a standard feature to facilitate ease of maintenance and cleaning. IMPELLER High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit. MOTORS The single range of units may have either an EC or AC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability. All motors are suitable for use in ambient air conditions up to 60 C. QUALITY MANAGEMENT All units in the Elta range are designed and manufactured to procedures as defined in BS EN ISO 9001:2008. All SSD units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Toilets Bathrooms Hotels Schools Colleges Libraries ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-POT Transformer Controller : 149-TC Flexible Connections : 018 FLEX Clamps (each) : 018 CLAMP AV Mounts (Set of 4) : 062 SEL Damper : 018 DAMPER Silencer : 068 JF Panel Filter : 018 FILT-P Electric Heater Battery : 018 HEA Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 105

SINGLEFLOW SSD Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SSD125-1AC 2550 SSD150-1AC 2485 SSD200-1AC 2500 SSD250-1AC 2710 SSD315-1AC 2715 SSD400-1AC 1385 SSD500-1AC 1400 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 45 m³/s 0.131 0.124 0.117 0.110 0.103 0.087 0.071 0.052 0.032 0.007 19.2 0.36 0.074 Outlet 45 W/(L/s) 0.65 0.68 0.71 0.74 0.78 0.89 1.04 1.31 1.99 8.87 Breakout 38 Inlet 51 m³/s 0.130 0.122 0.114 0.106 0.099 0.084 0.069 0.052 0.031 0.007 19.3 0.34 0.070 Outlet 52 W/(L/s) 0.47 0.51 0.56 0.61 0.66 0.77 0.93 1.18 1.79 6.85 Breakout 39 Inlet 47 m³/s 0.240 0.228 0.217 0.205 0.194 0.172 0.150 0.128 0.107 0.084 0.061 25.7 0.63 0.136 Outlet 46 W/(L/s) 0.56 0.60 0.64 0.68 0.72 0.82 0.93 1.07 1.26 1.53 2.03 Breakout 41 Inlet 50 m³/s 0.335 0.326 0.317 0.307 0.296 0.270 0.241 0.210 0.180 0.152 0.125 0.075 28.6 1.23 0.263 Outlet 49 W/(L/s) 0.59 0.62 0.64 0.67 0.71 0.79 0.89 1.02 1.18 1.35 1.57 2.33 Breakout 43 Inlet 40 m³/s 0.404 0.389 0.376 0.365 0.354 0.334 0.314 0.293 0.271 0.247 0.220 0.150 32.6 1.16 0.271 Outlet 40 W/(L/s) 0.55 0.58 0.61 0.64 0.67 0.74 0.81 0.89 0.98 1.09 1.23 1.68 Breakout 33 Inlet 43 m³/s 0.669 0.631 0.592 0.552 0.509 0.408 0.251 29.6 1.13 0.204 Outlet 42 W/(L/s) 0.34 0.35 0.37 0.40 0.43 0.52 0.73 Breakout 39 Inlet 42 m³/s 1.867 1.830 1.786 1.736 1.681 1.565 1.452 1.343 1.228 1.092 0.866 0.242 36.0 5.74 1.055 Outlet 43 W/(L/s) 0.64 0.65 0.66 0.68 0.69 0.73 0.78 0.83 0.89 0.98 1.16 3.05 Breakout 47 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 106 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SINGLEFLOW SSD Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SSD100-1EC SSD125-1EC SSD150-1EC SSD200-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 52 m³/s 0.112 0.110 0.107 0.105 0.103 0.098 0.093 0.088 0.081 0.075 0.067 0.046 30.2 1.19 0.128 Outlet 53 W/(L/s) 1.13 1.15 1.18 1.20 1.23 1.28 1.34 1.41 1.49 1.58 1.70 2.10 Breakout 47 Inlet 48 m³/s 0.100 0.098 0.097 0.095 0.093 0.089 0.084 0.079 0.074 0.069 0.062 0.042 35.5 1.02 0.103 Outlet 50 W/(L/s) 1.11 1.10 1.08 1.07 1.06 1.06 1.08 1.12 1.19 1.30 1.47 2.28 Breakout 44 Inlet 44 m³/s 0.063 0.060 0.056 0.052 0.048 0.040 0.031 0.023 0.015 0.009 0.003 26.1 0.37 0.041 Outlet 42 W/(L/s) 0.44 0.47 0.50 0.54 0.60 0.76 1.02 1.47 2.30 4.17 12.02 Breakout 38 Inlet *20 m³/s 0.019 0.008 7.8 0.08 0.005 Outlet *20 W/(L/s) 0.21 0.52 Breakout *20 Inlet 52 m³/s 0.140 0.137 0.134 0.131 0.127 0.121 0.114 0.106 0.098 0.088 0.078 0.051 31.2 1.23 0.133 Outlet 53 W/(L/s) 0.93 0.96 0.98 1.00 1.03 1.08 1.14 1.22 1.31 1.42 1.57 2.15 Breakout 46 Inlet 49 m³/s 0.125 0.121 0.117 0.114 0.110 0.104 0.097 0.090 0.083 0.075 0.066 0.041 33.9 0.94 0.099 Outlet 48 W/(L/s) 0.80 0.80 0.81 0.82 0.84 0.88 0.94 1.02 1.13 1.27 1.48 2.35 Breakout 42 Inlet 49 m³/s 0.074 0.070 0.065 0.061 0.055 0.043 0.031 0.022 0.014 0.008 0.003 28.7 0.39 0.041 Outlet 41 W/(L/s) 0.36 0.38 0.41 0.45 0.50 0.66 0.96 1.49 2.43 4.39 10.81 Breakout 36 Inlet *20 m³/s 0.024 0.013 11.3 0.08 0.005 Outlet *20 W/(L/s) 0.17 0.31 Breakout *20 Inlet 52 m³/s 0.166 0.161 0.157 0.153 0.149 0.140 0.132 0.124 0.116 0.107 0.097 0.073 37.7 1.21 0.141 Outlet 54 W/(L/s) 0.85 0.87 0.89 0.91 0.93 0.98 1.03 1.08 1.14 1.21 1.30 1.59 Breakout 47 Inlet 45 m³/s 0.142 0.139 0.134 0.130 0.125 0.114 0.104 0.095 0.086 0.077 0.068 0.046 33.8 0.96 0.102 Outlet 51 W/(L/s) 0.67 0.67 0.68 0.69 0.71 0.77 0.85 0.96 1.09 1.24 1.43 2.10 Breakout 40 Inlet 44 m³/s 0.094 0.083 0.074 0.065 0.057 0.043 0.031 0.021 0.011 0.003 29.1 0.35 0.038 Outlet 47 W/(L/s) 0.29 0.32 0.35 0.40 0.46 0.64 0.94 1.51 2.92 11.01 Breakout 34 Inlet *20 m³/s 0.029 0.007 6.2 0.08 0.004 Outlet *20 W/(L/s) 0.14 0.59 Breakout *20 Inlet 56 m³/s 0.306 0.299 0.291 0.283 0.276 0.261 0.246 0.231 0.215 0.199 0.183 0.148 37.7 2.08 0.239 Outlet 57 W/(L/s) 0.71 0.73 0.76 0.78 0.81 0.87 0.93 1.01 1.08 1.17 1.28 1.55 Breakout 51 Inlet 49 m³/s 0.267 0.254 0.243 0.233 0.224 0.207 0.191 0.176 0.161 0.147 0.133 0.104 41.4 1.46 0.167 Outlet 50 W/(L/s) 0.56 0.58 0.60 0.62 0.64 0.70 0.76 0.83 0.91 1.01 1.14 1.50 Breakout 41 Inlet 43 m³/s 0.166 0.150 0.134 0.119 0.105 0.081 0.062 0.047 0.034 0.023 0.013 36.1 0.51 0.058 Outlet 43 W/(L/s) 0.24 0.26 0.29 0.33 0.38 0.51 0.69 0.97 1.43 2.24 4.12 Breakout 35 Inlet *20 m³/s 0.059 0.025 14.2 0.09 0.006 Outlet *20 W/(L/s) 0.10 0.23 Breakout *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. * At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. When correctly installed the fan will be inaudible (less than 20dBA). Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 107

SINGLEFLOW SSD Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SSD250-1EC SSD315-1EC SSD400-1EC SSD500-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 51 m³/s 0.344 0.327 0.312 0.298 0.283 0.255 0.225 0.195 0.168 0.145 0.125 0.096 32.8 1.87 0.224 Outlet 51 W/(L/s) 0.54 0.57 0.59 0.61 0.64 0.70 0.79 0.91 1.07 1.26 1.49 2.02 Breakout 46 Inlet 47 m³/s 0.270 0.261 0.251 0.239 0.226 0.192 0.154 0.124 0.102 0.084 0.070 0.048 35.3 1.25 0.148 Outlet 46 W/(L/s) 0.39 0.40 0.42 0.44 0.46 0.54 0.67 0.86 1.07 1.34 1.67 2.65 Breakout 42 Inlet 36 m³/s 0.174 0.150 0.124 0.097 0.074 0.043 0.024 30.2 0.33 0.039 Outlet 36 W/(L/s) 0.18 0.20 0.24 0.31 0.41 0.77 1.52 Breakout 26 Inlet *20 m³/s 0.067 0.019 12.4 0.09 0.007 Outlet *20 W/(L/s) 0.09 0.30 Breakout *20 Inlet 48 m³/s 0.629 0.615 0.601 0.586 0.570 0.537 0.501 0.460 0.415 0.363 0.303 0.151 35.4 2.07 0.445 Outlet 50 W/(L/s) 0.67 0.70 0.72 0.74 0.77 0.82 0.89 0.96 1.04 1.15 1.29 1.97 Breakout 42 Inlet 48 m³/s 0.503 0.482 0.459 0.436 0.411 0.358 0.299 0.230 0.150 0.052 33.3 1.08 0.228 Outlet 47 W/(L/s) 0.44 0.46 0.49 0.52 0.55 0.63 0.73 0.88 1.16 2.43 Breakout 41 Inlet 39 m³/s 0.294 0.268 0.231 0.173 0.102 25.9 0.33 0.064 Outlet 35 W/(L/s) 0.21 0.24 0.28 0.35 0.53 Breakout 28 Inlet *20 m³/s 0.098 4.4 0.10 0.015 Outlet *20 W/(L/s) 0.15 Breakout *20 Inlet 57 m³/s 1.051 1.041 1.031 1.021 1.010 0.988 0.963 0.936 0.906 0.872 0.831 0.724 44.3 4.39 0.954 Outlet 60 W/(L/s) 0.76 0.77 0.79 0.80 0.82 0.86 0.89 0.94 0.98 1.04 1.10 1.28 Breakout 57 Inlet 49 m³/s 0.835 0.824 0.811 0.798 0.784 0.752 0.714 0.664 0.598 0.514 0.428 0.245 42.9 2.39 0.503 Outlet 50 W/(L/s) 0.50 0.52 0.53 0.55 0.57 0.61 0.66 0.73 0.82 0.94 1.08 1.56 Breakout 46 Inlet 40 m³/s 0.506 0.479 0.449 0.414 0.371 0.238 36.9 0.61 0.128 Outlet 38 W/(L/s) 0.22 0.25 0.27 0.30 0.34 0.51 Breakout 34 Inlet *20 m³/s 0.164 3.5 0.20 0.052 Outlet *20 W/(L/s) 0.32 Breakout *20 Inlet 47 m³/s 1.422 1.397 1.372 1.345 1.318 1.260 1.197 1.129 1.053 0.967 0.868 0.599 50.9 3.51 0.774 Outlet 50 W/(L/s) 0.46 0.48 0.50 0.52 0.53 0.57 0.62 0.67 0.73 0.80 0.89 1.19 Breakout 51 Inlet 41 m³/s 1.141 1.114 1.085 1.054 1.020 0.946 0.857 0.744 0.591 0.354 51.1 1.97 0.423 Outlet 42 W/(L/s) 0.31 0.33 0.34 0.36 0.38 0.43 0.49 0.57 0.69 0.97 Breakout 44 Inlet 28 m³/s 0.687 0.637 0.577 0.501 0.393 44.7 0.51 0.107 Outlet 28 W/(L/s) 0.13 0.15 0.18 0.21 0.27 Breakout 30 Inlet *20 m³/s 0.231 3.7 0.19 0.054 Outlet *20 W/(L/s) 0.22 Breakout *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. * At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. When correctly installed the fan will be inaudible (less than 20dBA). 108 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SINGLEFLOW SSD Performance, SFP & Electrical Data THREE Phase - 380V to 480V / 50Hz or 60Hz SSD500-3EC Control Voltage 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 51 m³/s 1.789 1.770 1.751 1.732 1.712 1.671 1.628 1.583 1.536 1.486 1.432 1.313 52.4 2.31 1.507 Outlet 57 W/(L/s) 0.69 0.71 0.73 0.74 0.76 0.80 0.84 0.88 0.93 0.97 1.03 1.14 Breakout 57 Inlet 46 m³/s 1.419 1.397 1.373 1.349 1.323 1.269 1.210 1.145 1.072 0.988 0.889 0.620 51.8 1.29 0.781 Outlet 48 W/(L/s) 0.45 0.47 0.49 0.50 0.52 0.57 0.61 0.66 0.72 0.79 0.87 1.15 Breakout 51 Inlet 34 m³/s 0.852 0.813 0.768 0.718 0.660 0.500 0.197 47.5 0.47 0.188 Outlet 34 W/(L/s) 0.19 0.21 0.23 0.25 0.28 0.37 0.73 Breakout 37 Inlet - m³/s 0.284 14.3 0.16 0.025 Outlet - W/(L/s) 0.08 Breakout - A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. * At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. When correctly installed the fan will be inaudible (less than 20dBA). Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 109

SINGLEFLOW SSD Dimensional Data E Ø D C A H B 74 G F J NO OF HOLES Ø K A B C D E F G H J K Weight kg SSD100 100 SSD125 424 353 263 125 389 386 379 499 11 SSD150 150 4 8 SSD200 305 200 549 13 474 400 436 436 426 SSD250 335 250 589 14 SSD315 574 489 402 315 525 515 515 689 22 SSD400 704 574 474 400 670 580 620 859 34 6 10 SSD500 884 754 603 500 850 700 800 1039 54 Dimensions are in mm. 110 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SINGLEFLOW SSD Accessories Transformer Controller Flexible Connections (each) Clamps (each) AV Mounts (set of 4) Panel Filter Electric Heater Battery SSD125-1AC 149-TC12 018-0125-FLEX 018-125-CLAMP 062-SEL03 018-0125-FILT-P 018-0125-HEAT-1 SSD150-1AC 149-TC12 018-0150-FLEX 018-150-CLAMP 062-SEL03 018-0150-FILT-P 018-0150-HEAT-1 SSD200-1AC 149-TC12 018-0200-FLEX 018-200-CLAMP 062-SEL03 018-0200-FILT-P 018-0200-HEAT-1 SSD250-1AC 149-TC12 018-0250-FLEX 018-250-CLAMP 062-SEL03 018-0250-FILT-P 018-0250-HEAT-1 SSD315-1AC 149-TC12 018-0315-FLEX 018-315-CLAMP 062-SEL03 018-0315-FILT-P 018-0315-HEA1/3 SSD400-1AC 149-TC12 018-0400-FLEX 018-400-CLAMP 062-SEL04 018-0400-FILT-P 018-0400-HEA1/3 SSD500-1AC 149-TC18 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 018-0500-HEAT-3 018-0500-HEAT-4 Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram SSD125-1AC 068-0125-JF1 068-0125-JF2 068-0125-JF3 068-0125-JF4 152-177 SSD150-1AC 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-177 SSD200-1AC 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-177 SSD250-1AC 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-177 SSD315-1AC 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-177 SSD400-1AC 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 152-104A SSD500-1AC Please enquire 152-104A Electronic Controller Flexible Connections (each) Clamps (each) AV Mounts (set of 4) Panel Filter Electric Heater Battery SSD100-1EC 149-POT-10 018-0100-FLEX 018-0100-CLAMP 062-SEL03 018-0100-FILT-P 018-0100-HEAT-1 SSD125-1EC 149-POT-10 018-0125-FLEX 018-125-CLAMP 062-SEL03 018-0125-FILT-P 018-0125-HEAT-1 SSD150-1EC 149-POT-10 018-0150-FLEX 018-150-CLAMP 062-SEL03 018-0150-FILT-P 018-0150-HEAT-1 SSD200-1EC 149-POT-10 018-0200-FLEX 018-200-CLAMP 062-SEL03 018-0200-FILT-P 018-0200-HEAT-1 SSD250-1EC 149-POT-10 018-0250-FLEX 018-250-CLAMP 062-SEL03 018-0250-FILT-P 018-0250-HEAT-1 SSD315-1EC 149-POT-10 018-0315-FLEX 018-315-CLAMP 062-SEL03 018-0315-FILT-P 018-0315-HEA1/3 SSD400-1EC 149-POT-10 018-0400-FLEX 018-400-CLAMP 062-SEL04 018-0400-FILT-P 018-0400-HEA1/3 SSD500-1EC 149-POT-10 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 018-0500-HEAT-3 018-0500-HEAT-4 018-0500-HEAT-3 SSD500-3EC 149-POT-10 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 018-0500-HEAT-4 Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram SSD100-1EC 068-0100-JF1 068-0100-JF2 068-0100-JF3 068-0100-JF4 152-00036 SSD125-1EC 068-0125-JF1 068-0125-JF2 068-0125-JF3 068-0125-JF4 152-00036 SSD150-1EC 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-00036 SSD200-1EC 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-00036 SSD250-1EC 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-00044 SSD315-1EC 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-00044 SSD400-1EC 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 152-MOEA03K1 SSD500-1EC Please enquire 152-MOEA03K1 SSD500-3EC Please enquire 152-MOEA03K3 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 111

SINGLEFLOW SSD Notes 112 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUIETFLOW SQS Centrifugal Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 8 sizes from 100mm to 500mm. ü Air volume flow rates up to 1.867 m³/s (AC) and 1.789 m³/s (EC). ü Static pressures up to 640 Pa (AC) and 930 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Robust galvanised sheet steel casing. ü Available in AC & EC. CASING The robust 1.2mm galvanised mild steel sheet casing, is treated internally with a Class O rated (BS 476 Parts 6 and 7) fire resistant acoustic foam lining with a fire resistant polymeric coating. The wrap around folded casing is specially manufactured using integral motor mounting plates to provide additional rigidity for the casings. Each casing provides spigots to suit standard circular ducting. EPDM (Ethylene Propylene) rubber U shaped seals (being ozone and UV stable) are used to ensure a good seal back to the duct that is to be attached. A removable lid is provided as a standard feature to facilitate ease of maintenance and cleaning. IMPELLER High efficiency low tonal noise backward curved centrifugal impeller. Dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit. MOTORS The single range of units may have either an EC or AC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability All motors are suitable for use in ambient air conditions up to +60 C. Electrical connection shall be via an IP55 terminal box mounted on the side for easy customer connection. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SQS units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Toilets Bathrooms Hotels Schools Colleges Libraries ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-POT Transformer Controller : 149-TC Flexible Connections : 018 FLEX Clamps (each) : 018 CLAMP AV Mounts (Set of 4) : 062 SEL Damper : 018 DAMPER Silencer : 068 JF Panel Filter : 018 FILT-P Electric Heater Battery : 018 HEA Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 113

QUIETFLOW SQS Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SQS125-1ACL 2550 SQS150-1ACL 2485 SQS200-1ACL 2500 SQS250-1ACL 2710 SQS315-1ACL 2715 SQS400-1ACL 1385 SQS500-1ACL 1400 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 45 m³/s 0.131 0.124 0.117 0.110 0.103 0.087 0.071 0.052 0.032 0.007 19.2 0.36 0.074 Outlet 45 W/(L/s) 0.65 0.68 0.71 0.74 0.78 0.89 1.04 1.31 1.99 8.87 Breakout 38 Inlet 51 m³/s 0.130 0.122 0.114 0.106 0.099 0.084 0.069 0.052 0.031 0.007 19.3 0.34 0.070 Outlet 52 W/(L/s) 0.47 0.51 0.56 0.61 0.66 0.77 0.93 1.18 1.79 6.85 Breakout 39 Inlet 47 m³/s 0.240 0.228 0.217 0.205 0.194 0.172 0.150 0.128 0.107 0.084 0.061 25.7 0.63 0.136 Outlet 46 W/(L/s) 0.56 0.60 0.64 0.68 0.72 0.82 0.93 1.07 1.26 1.53 2.03 Breakout 41 Inlet 50 m³/s 0.335 0.326 0.317 0.307 0.296 0.270 0.241 0.210 0.180 0.152 0.125 0.075 28.6 1.23 0.263 Outlet 49 W/(L/s) 0.59 0.62 0.64 0.67 0.71 0.79 0.89 1.02 1.18 1.35 1.57 2.33 Breakout 43 Inlet 40 m³/s 0.404 0.389 0.376 0.365 0.354 0.334 0.314 0.293 0.271 0.247 0.220 0.150 32.6 1.16 0.271 Outlet 40 W/(L/s) 0.55 0.58 0.61 0.64 0.67 0.74 0.81 0.89 0.98 1.09 1.23 1.68 Breakout 33 Inlet 43 m³/s 0.669 0.631 0.592 0.552 0.509 0.408 0.251 29.6 1.13 0.204 Outlet 42 W/(L/s) 0.34 0.35 0.37 0.40 0.43 0.52 0.73 Breakout 39 Inlet 42 m³/s 1.867 1.830 1.786 1.736 1.681 1.565 1.452 1.343 1.228 1.092 0.866 0.242 36.0 5.74 1.055 Outlet 43 W/(L/s) 0.64 0.65 0.66 0.68 0.69 0.73 0.78 0.83 0.89 0.98 1.16 3.05 Breakout 47 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 114 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUIETFLOW SQS Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SQS100-1ECL SQS125-1ECL SQS150-1ECL SQS200-1ECL Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 51 m³/s 0.112 0.110 0.107 0.105 0.103 0.098 0.093 0.088 0.081 0.075 0.067 0.046 30.2 1.19 0.128 Outlet 50 W/(L/s) 1.13 1.15 1.18 1.20 1.23 1.28 1.34 1.41 1.49 1.58 1.70 2.10 Breakout 44 Inlet 48 m³/s 0.100 0.098 0.097 0.095 0.093 0.089 0.084 0.079 0.074 0.069 0.062 0.042 35.5 1.02 0.103 Outlet 50 W/(L/s) 1.11 1.10 1.08 1.07 1.06 1.06 1.08 1.12 1.19 1.30 1.47 2.28 Breakout 44 Inlet 44 m³/s 0.063 0.060 0.056 0.052 0.048 0.040 0.031 0.023 0.015 0.009 0.003 26.1 0.37 0.041 Outlet 42 W/(L/s) 0.44 0.47 0.50 0.54 0.60 0.76 1.02 1.47 2.30 4.17 12.02 Breakout 38 Inlet *20 m³/s 0.019 0.008 7.8 0.08 0.005 Outlet *20 W/(L/s) 0.21 0.52 Breakout *20 Inlet 49 m³/s 0.140 0.137 0.134 0.131 0.127 0.121 0.114 0.106 0.098 0.088 0.078 0.051 31.2 1.23 0.133 Outlet 54 W/(L/s) 0.93 0.96 0.98 1.00 1.03 1.08 1.14 1.22 1.31 1.42 1.57 2.15 Breakout 43 Inlet 49 m³/s 0.125 0.121 0.117 0.114 0.110 0.104 0.097 0.090 0.083 0.075 0.066 0.041 33.9 0.94 0.099 Outlet 48 W/(L/s) 0.80 0.80 0.81 0.82 0.84 0.88 0.94 1.02 1.13 1.27 1.48 2.35 Breakout 42 Inlet 49 m³/s 0.074 0.070 0.065 0.061 0.055 0.043 0.031 0.022 0.014 0.008 0.003 28.7 0.39 0.041 Outlet 41 W/(L/s) 0.36 0.38 0.41 0.45 0.50 0.66 0.96 1.49 2.43 4.39 10.81 Breakout 36 Inlet *20 m³/s 0.024 0.013 11.3 0.08 0.005 Outlet *20 W/(L/s) 0.17 0.31 Breakout *20 Inlet 49 m³/s 0.166 0.161 0.157 0.153 0.149 0.140 0.132 0.124 0.116 0.107 0.097 0.073 37.7 1.21 0.141 Outlet 51 W/(L/s) 0.85 0.87 0.89 0.91 0.93 0.98 1.03 1.08 1.14 1.21 1.30 1.59 Breakout 43 Inlet 45 m³/s 0.142 0.139 0.134 0.130 0.125 0.114 0.104 0.095 0.086 0.077 0.068 0.046 33.8 0.96 0.102 Outlet 51 W/(L/s) 0.67 0.67 0.68 0.69 0.71 0.77 0.85 0.96 1.09 1.24 1.43 2.10 Breakout 40 Inlet 44 m³/s 0.094 0.083 0.074 0.065 0.057 0.043 0.031 0.021 0.011 0.003 29.1 0.35 0.038 Outlet 47 W/(L/s) 0.29 0.32 0.35 0.40 0.46 0.64 0.94 1.51 2.92 11.01 Breakout 34 Inlet *20 m³/s 0.029 0.007 6.2 0.08 0.004 Outlet *20 W/(L/s) 0.14 0.59 Breakout *20 Inlet 51 m³/s 0.306 0.299 0.291 0.283 0.276 0.261 0.246 0.231 0.215 0.199 0.183 0.148 37.7 2.08 0.239 Outlet 53 W/(L/s) 0.71 0.73 0.76 0.78 0.81 0.87 0.93 1.01 1.08 1.17 1.28 1.55 Breakout 44 Inlet 49 m³/s 0.267 0.254 0.243 0.233 0.224 0.207 0.191 0.176 0.161 0.147 0.133 0.104 41.4 1.46 0.167 Outlet 50 W/(L/s) 0.56 0.58 0.60 0.62 0.64 0.70 0.76 0.83 0.91 1.01 1.14 1.50 Breakout 41 Inlet 43 m³/s 0.166 0.150 0.134 0.119 0.105 0.081 0.062 0.047 0.034 0.023 0.013 36.1 0.51 0.058 Outlet 43 W/(L/s) 0.24 0.26 0.29 0.33 0.38 0.51 0.69 0.97 1.43 2.24 4.12 Breakout 35 Inlet *20 m³/s 0.059 0.025 14.2 0.09 0.006 Outlet *20 W/(L/s) 0.10 0.23 Breakout *20 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. * At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. When correctly installed the fan will be inaudible (less than 20dBA). Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 115

QUIETFLOW SQS Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SQS250-1ECL SQS315-1ECL SQS400-1ECL SQS500-1ECL Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 49 m³/s 0.344 0.327 0.312 0.298 0.283 0.255 0.225 0.195 0.168 0.145 0.125 0.096 32.8 1.87 0.224 Outlet 48 W/(L/s) 0.54 0.57 0.59 0.61 0.64 0.70 0.79 0.91 1.07 1.26 1.49 2.02 Breakout 44 Inlet 47 m³/s 0.270 0.261 0.251 0.239 0.226 0.192 0.154 0.124 0.102 0.084 0.070 0.048 35.3 1.25 0.148 Outlet 46 W/(L/s) 0.39 0.40 0.42 0.44 0.46 0.54 0.67 0.86 1.07 1.34 1.67 2.65 Breakout 42 Inlet 36 m³/s 0.174 0.150 0.124 0.097 0.074 0.043 0.024 30.2 0.33 0.039 Outlet 36 W/(L/s) 0.18 0.20 0.24 0.31 0.41 0.77 1.52 Breakout 26 Inlet *20 m³/s 0.067 0.019 12.4 0.09 0.007 Outlet *20 W/(L/s) 0.09 0.30 Breakout *20 Inlet 54 m³/s 0.629 0.615 0.601 0.586 0.570 0.537 0.501 0.460 0.415 0.363 0.303 0.151 35.4 2.07 0.445 Outlet 53 W/(L/s) 0.67 0.70 0.72 0.74 0.77 0.82 0.89 0.96 1.04 1.15 1.29 1.97 Breakout 48 Inlet 48 m³/s 0.503 0.482 0.459 0.436 0.411 0.358 0.299 0.230 0.150 0.052 33.3 1.08 0.228 Outlet 47 W/(L/s) 0.44 0.46 0.49 0.52 0.55 0.63 0.73 0.88 1.16 2.43 Breakout 41 Inlet 39 m³/s 0.294 0.268 0.231 0.173 0.102 25.9 0.33 0.064 Outlet 35 W/(L/s) 0.21 0.24 0.28 0.35 0.53 Breakout 28 Inlet *20 m³/s 0.098 4.4 0.10 0.015 Outlet *20 W/(L/s) 0.15 Breakout *20 Inlet 55 m³/s 1.051 1.041 1.031 1.021 1.010 0.988 0.963 0.936 0.906 0.872 0.831 0.724 44.3 4.39 0.954 Outlet 56 W/(L/s) 0.76 0.77 0.79 0.80 0.82 0.86 0.89 0.94 0.98 1.04 1.10 1.28 Breakout 52 Inlet 49 m³/s 0.835 0.824 0.811 0.798 0.784 0.752 0.714 0.664 0.598 0.514 0.428 0.245 42.9 2.39 0.503 Outlet 50 W/(L/s) 0.50 0.52 0.53 0.55 0.57 0.61 0.66 0.73 0.82 0.94 1.08 1.56 Breakout 46 Inlet 40 m³/s 0.506 0.479 0.449 0.414 0.371 0.238 36.9 0.61 0.128 Outlet 38 W/(L/s) 0.22 0.25 0.27 0.30 0.34 0.51 Breakout 34 Inlet *20 m³/s 0.164 3.5 0.20 0.052 Outlet *20 W/(L/s) 0.32 Breakout *20 Inlet 45 m³/s 1.422 1.397 1.372 1.345 1.318 1.260 1.197 1.129 1.053 0.967 0.868 0.599 50.9 3.51 0.774 Outlet 47 W/(L/s) 0.46 0.48 0.50 0.52 0.53 0.57 0.62 0.67 0.73 0.80 0.89 1.19 Breakout 49 Inlet 41 m³/s 1.141 1.114 1.085 1.054 1.020 0.946 0.857 0.744 0.591 0.354 51.1 1.97 0.423 Outlet 42 W/(L/s) 0.31 0.33 0.34 0.36 0.38 0.43 0.49 0.57 0.69 0.97 Breakout 44 Inlet 28 m³/s 0.687 0.637 0.577 0.501 0.393 44.7 0.51 0.107 Outlet 28 W/(L/s) 0.13 0.15 0.18 0.21 0.27 Breakout 30 Inlet *20 m³/s 0.231 3.7 0.19 0.054 Outlet *20 W/(L/s) 0.22 Breakout *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. * At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. When correctly installed the fan will be inaudible (less than 20dBA). 116 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUIETFLOW SQS Performance, SFP & Electrical Data THREE Phase - 380V to 480V / 50Hz or 60Hz SQS500-3ECL Control Voltage 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 51 m³/s 1.789 1.770 1.751 1.732 1.712 1.671 1.628 1.583 1.536 1.486 1.432 1.313 52.4 2.31 1.507 Outlet 57 W/(L/s) 0.69 0.71 0.73 0.74 0.76 0.80 0.84 0.88 0.93 0.97 1.03 1.14 Breakout 57 Inlet 46 m³/s 1.419 1.397 1.373 1.349 1.323 1.269 1.210 1.145 1.072 0.988 0.889 0.620 51.8 1.29 0.781 Outlet 48 W/(L/s) 0.45 0.47 0.49 0.50 0.52 0.57 0.61 0.66 0.72 0.79 0.87 1.15 Breakout 51 Inlet 34 m³/s 0.852 0.813 0.768 0.718 0.660 0.500 0.197 47.5 0.47 0.188 Outlet 34 W/(L/s) 0.19 0.21 0.23 0.25 0.28 0.37 0.73 Breakout 37 Inlet *20 m³/s 0.284 14.3 0.16 0.025 Outlet *20 W/(L/s) 0.08 Breakout *20 DCV CONTROLS Demand Control Ventilation (DCV) EC options available, refer to pages 228-229 for DCV information and page 144 for product information; to order add DCV to product code: SQS100-ECL with DCV order SQSDCV100-ECL. A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. * At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. When correctly installed the fan will be inaudible (less than 20dBA). Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 117

G Ø D C QUIETFLOW SQS Dimensional Data E A H B 76 F J NO OF HOLES Ø K A B C D E F G H J K Weight kg SQS100 100 SQS125 509 350 261 125 390 485 380 587 14 SQS150 150 4 8 SQS200 584 396 303 200 436 550 426 662 17 SQS250 333 250 702 19 SQS315 635 485 400 315 525 580 515 753 27 SQS400 700 570 472 400 670 620 858 36 6 10 SQS500 880 750 601 500 850 700 800 1038 60 Dimensions are in mm. 118 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUIETFLOW SQS Accessories Transformer Controller Flexible Connections (each) Clamps (each) AV Mounts (set of 4) Panel Filter Electric Heater Battery SQS125-1ACL 149-TC12 018-0125-FLEX 018-125-CLAMP 062-SEL03 018-0125-FILT-P 018-0125-HEAT-1 SQS150-1ACL 149-TC12 018-0150-FLEX 018-150-CLAMP 062-SEL03 018-0150-FILT-P 018-0150-HEAT-1 SQS200-1ACL 149-TC12 018-0200-FLEX 018-200-CLAMP 062-SEL03 018-0200-FILT-P 018-0200-HEAT-1 SQS250-1ACL 149-TC12 018-0250-FLEX 018-250-CLAMP 062-SEL03 018-0250-FILT-P 018-0250-HEAT-1 SQS315-1ACL 149-TC12 018-0315-FLEX 018-315-CLAMP 062-SEL03 018-0315-FILT-P 018-0315-HEA1/3 SQS400-1ACL 149-TC12 018-0400-FLEX 018-400-CLAMP 062-SEL04 018-0400-FILT-P 018-0400-HEA1/3 SQS500-1ACL 149-TC18 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 018-0500-HEAT-3 018-0500-HEAT-4 Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram SQS125-1ACL 068-0125-JF1 068-0125-JF2 068-0125-JF3 068-0125-JF4 152-177 SQS150-1ACL 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-177 SQS200-1ACL 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-177 SQS250-1ACL 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-177 SQS315-1ACL 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-177 SQS400-1ACL 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 152-104A SQS500-1ACL Please enquire 152-104A Electronic Controller Flexible Connections (each) Clamps (each) AV Mounts (set of 4) Panel Filter Electric Heater Battery SQS100-1ECL 149-POT-10 018-0100-FLEX 018-0100-CLAMP 062-SEL03 018-0100-FILT-P 018-0100-HEAT-1 SQS125-1ECL 149-POT-10 018-0125-FLEX 018-125-CLAMP 062-SEL03 018-0125-FILT-P 018-0125-HEAT-1 SQS150-1ECL 149-POT-10 018-0150-FLEX 018-150-CLAMP 062-SEL03 018-0150-FILT-P 018-0150-HEAT-1 SQS200-1ECL 149-POT-10 018-0200-FLEX 018-200-CLAMP 062-SEL03 018-0200-FILT-P 018-0200-HEAT-1 SQS250-1ECL 149-POT-10 018-0250-FLEX 018-250-CLAMP 062-SEL03 018-0250-FILT-P 018-0250-HEAT-1 SQS315-1ECL 149-POT-10 018-0315-FLEX 018-315-CLAMP 062-SEL03 018-0315-FILT-P 018-0315-HEA1/3 SQS400-1ECL 149-POT-10 018-0400-FLEX 018-400-CLAMP 062-SEL04 018-0400-FILT-P 018-0400-HEA1/3 SQS500-1ECL 149-POT-10 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 018-0500-HEAT-3 018-0500-HEAT-4 SQS500-3ECL 149-POT-10 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 018-0500-HEAT-3 018-0500-HEAT-4 Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram DCV Accessories Sensors SQS100-1ECL 068-0100-JF1 068-0100-JF2 068-0100-JF3 068-0100-JF4 152-00036 SQS125-1ECL 068-0125-JF1 068-0125-JF2 068-0125-JF3 068-0125-JF4 152-00036 SQS150-1ECL 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-00036 SQS200-1ECL 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-00036 SQS250-1ECL 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-00044 SQS315-1ECL 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-00044 SQS400-1ECL 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 152-MOEA03K1 Can be used with all DCV products. 149-DCV-CO2 149-DCV-DPT150 149-DCV-H1 149-DCV-HRT 149-DCV-PIR 149-DCV-TRT SQS500-1ECL Please enquire 152-MOEA03K1 SQS500-3ECL Please enquire 152-MOEA03K3 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 119

QUIETFLOW SQS Notes 120 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUBE SQU Centrifugal Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 4 physical sizes with 5 models from 315mm to 710mm. ü Air volume flow rates up to 3.9 m³/s. ü Static pressures up to 928 Pa. ü Suitable for operating temperatures up to +50 C. ü Inverter speed controllable via 1Ph and 3Ph supply. ü Interchangeable double skinned panels. ü Available in AC. CASING Constructed from self supporting corrosion-resistant extruded aluminium section. Straight through airflow as supplied. Discharge position can be altered on site. The inlet and outlet panels incorporate circular spigots with integral U-shaped ozone and UV stable EPDM rubber seals to prevent duct leakage. Assembled with shock resistant fibreglass reinforced Polyamide PA6 corners, and 25mm thick double skinned removable panels, manufactured from pre-galvanised steel, in-filled with a non flammable mineral wool, 60kg/m³, thereby minimising breakout noise. IMPELLER A high efficiency backward curved welded steel impeller with a nonoverloading power characteristic, finished with a powder coating to RAL 5002 for greater surface protection, and dynamically balanced to G2.5 / G6.3 according to ISO1940 part 1. MOTORS Three phase multi-voltage IP55 TEFC Foot / Flange mounted IEC frame motors, wound for either (Delta) 230V/3Ph/50Hz or (Star) at 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls. Motors are pre-wired to an IP55 terminal box mounted on the side, for easy customer connection. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SQU units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Kitchens Restaurants Schools Colleges Shops Sports Halls Shower Rooms Factories Industrial Units Warehousing ACCESSORIES For full accessories & controls information please visit eltaselect.com Inverter : 149-ODE Matching Flanges : 061B Flexible Connections : 063 MAN Silencer : 068 DE*P(C) Weather Hood : 064 WHC Transition Piece : 260 TP Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 121

QUBE SQU Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SQU1/4-3 1450 SQU2/4-3 1420 SQU3/4-3 1469 SQU4/4-3 1447 SQU4/6-3 910 Airflow SFP Airflow m³/s @ Static Pressure Pa. Overall Efficiency Motor 0 100 200 250 300 350 400 450 500 550 600 700 800 900 % kw Peak m³/s 0.581 0.481 0.353 0.264 0.163 Amps Electrical Data FLC* Amps FLC # Amps 35.5 0.25 0.805 2.3 1.02 dba @ 3m Inlet 51 Outlet 53 W/(L/s) 0.32 0.45 0.74 1.00 1.31 Breakout 36 m³/s 1.366 1.243 1.115 1.045 0.967 0.877 0.764 0.601 0.185 55.6 0.55 1.42 5.3 2.05 Inlet 57 Outlet 59 W/(L/s) 0.31 0.42 0.53 0.59 0.66 0.74 0.84 1.01 - Breakout 42 m³/s 1.964 1.822 1.657 1.560 1.451 1.329 1.197 1.056 0.904 0.724 0.410 44.4 1.1 2.4 8.5 3.17 Inlet 60 Outlet 62 W/(L/s) 0.39 0.49 0.60 0.66 0.73 0.81 0.90 1.01 1.13 1.30 1.86 Breakout 45 m³/s 3.878 3.640 3.424 3.317 3.210 3.102 2.989 2.873 2.749 2.618 2.476 2.143 1.707 1.089 52.2 3.0 6.5-6.2 Inlet 66 Outlet 68 W/(L/s) 0.49 0.61 0.71 0.77 0.82 0.87 0.93 0.98 1.04 1.11 1.18 1.25 1.34 1.45 Breakout 51 m³/s 3.019 2.863 2.672 2.556 2.420 2.255 2.047 1.775 1.388 60.3 1.5 3.9 7.6 2.8 Inlet 59 Outlet 61 W/(L/s) 0.36 0.41 0.47 0.51 0.55 0.60 0.67 0.76 0.90 Breakout 44 Dimensional Data D A D A A Spigot 65mm T/BOX Spigot Ø A D Weight kg SQU1/4 315 500 60 38 SQU2/4 500 670 70 66 SQU3/4 560 820 70 99 SQU4/4 710 1020 85 165 SQU4/6 710 1020 85 178 Dimensions are in mm. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. FLC* Amps at 230V / 1Ph / 50Hz input before a 1Ph to 3Ph Variable Speed Drive FLC# Amps at 400V / 3Ph / 50Hz input before a 3Ph to 3Ph Variable Speed Drive A variable speed drive (Eltadrive) must be installed with this fan Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 122 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUBE SQU Accessories Inverter Controller 1PH-3PH IP66 Inverter Controller 1PH-3PH IP20 Inverter Controller 3PH IP66 3PH- Inverter Controller 3PH-3PH IP20 Matching Flanges (each) SQU1/4-3 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 061B-0315 SQU2/4-3 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 061B-0500 SQU3/4-3 149-ODE-2-12151-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 061B-0560 SQU4/4-3 - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 061B-0710 SQU4/6-3 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 061B-0710 Flexible Connections (each) Weather Hood Silencer 1D Unpodded Silencer 2D Unpodded Wiring Diagram SQU1/4-3 063-0315-PU250 064-SQU-WHV-A 068-0315-1DENP 068-0315-2DENP 152-600 SQU2/4-3 063-0500-PU250 064-SQU-WHV-B 068-0500-1DENP 068-0500-2DENP 152-600 SQU3/4-3 063-0560-PU250 064-SQU-WHV-C 068-0560-1DENP 068-0560-2DENP 152-600 SQU4/4-3 063-0710-PU250 064-SQU-WHV-D 068-0710-1DENP 068-0710-2DENP 152-600 SQU4/6-3 063-0710-PU250 064-SQU-WHV-D 068-0710-1DENP 068-0710-2DENP 152-600 Fan & inverter packages available. Please contact Elta Fans for more information. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 123

QUBE SQU Notes 124 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MULTIFLOW SMB Mixed Flow Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 5 standard sizes from 400mm to 650mm. ü Air volume flow rates up to 2.87m³/s. ü Static pressures up to 600 Pa. ü Suitable for operating temperatures up to +50 C. ü Available in AC. CASING The all metal casing shall be manufactured using pre-galvanised sheet steel suitably stiffened. Casings shall incorporate Ductmate flange connections at each end. Motor supports shall be of steel sheet construction, hot-dip galvanised to BS EN ISO 1461:2009 after manufacture and shall have an aerodynamic profile. IMPELLER Impellers shall be single inlet mixed flow type. Manufactured in a highly complex one-shot injection moulding process without any welded seams for maximum process reliability. Impellers are to be dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit. MOTORS The single range of units may have either an EC or AC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability All motors are suitable for use in ambient air conditions up to +60 C. Electrical connection shall be via an IP55 terminal box mounted on the side for easy customer connection. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SMB units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Where higher pressure developments are required, such as: Kitchen Canopies Restaurants Lift Motor Rooms General HVAC installations ACCESSORIES For full accessories & controls information please visit eltaselect.com Transformer Controller : 149-TC Mounting Brackets (each) : 060 MFB Flexible Connections : 063 MFB Silencer : 068 MFB Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 125

MULTIFLOW SMB Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SMB400/4-1AC 1370 SMB450/4-1AC 1385 SMB500/4-1AC 1275 SMB550/4-1AC 1390 SMB650/4-1AC 1380 Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data m³/s 0.709 0.686 0.658 0.624 0.581 0.470 0.248 0.036 Inlet 46 34.2 1.09 0.212 W/(L/s) 0.29 0.31 0.33 0.36 0.38 0.46 0.74 3.73 - - - - Outlet 49 m³/s 1.064 1.033 1.000 0.965 0.927 0.838 0.721 0.529 0.144 Inlet 43 38.4 2.05 0.391 W/(L/s) 0.35 0.37 0.38 0.40 0.43 0.48 0.55 0.70 1.92 Outlet 47 m³/s 1.445 1.386 1.326 1.267 1.206 1.079 0.936 0.762 0.512 0.195 Inlet 48 34.5 2.82 0.568 W/(L/s) 0.40 0.42 0.44 0.47 0.49 0.55 0.63 0.74 0.98 2.06 Outlet 52 m³/s 2.173 2.117 2.061 2.004 1.947 1.829 1.706 1.574 1.429 1.264 1.059 0.243 Inlet 55 39.5 5.71 1.151 W/(L/s) 0.51 0.53 0.55 0.56 0.58 0.63 0.68 0.74 0.81 0.91 1.06 3.05 Outlet 58 m³/s 2.892 2.841 2.789 2.735 2.680 2.562 2.431 2.283 2.114 1.919 1.697 1.138 Inlet 58 40.5 7.25 1.659 W/(L/s) 0.57 0.58 0.60 0.62 0.64 0.68 0.72 0.77 0.82 0.90 0.99 1.32 Outlet 61 Peak Amps Input kw dba @ 3m THREE Phase - 380V to 415V / 50Hz Speed r/min Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data m³/s 0.707 0.687 0.664 0.636 0.601 0.502 0.301 Inlet 46 SMB400/4-3AC 1390 37.5 0.52 0.208 W/(L/s) 0.29 0.31 0.32 0.34 0.36 0.42 0.61 Outlet 50 m³/s 1.089 1.045 1.001 0.958 0.914 0.823 0.716 0.536 0.148 Inlet 42 SMB450/4-3AC 1375 39.5 0.88 0.378 W/(L/s) 0.33 0.35 0.37 0.39 0.42 0.47 0.54 0.67 1.67 Outlet 46 m³/s 1.441 1.393 1.343 1.292 1.238 1.122 0.990 0.832 0.616 0.250 Inlet 49 SMB500/4-3AC 1300 35.1 1.40 0.591 W/(L/s) 0.41 0.43 0.45 0.48 0.50 0.55 0.62 0.72 0.89 1.67 Outlet 52 m³/s 2.168 2.120 2.070 2.019 1.967 1.856 1.736 1.602 1.448 1.259 0.999 0.210 Inlet 51 SMB550/4-3AC 1380 40.3 2.33 1.098 W/(L/s) 0.50 0.51 0.52 0.54 0.55 0.59 0.64 0.69 0.77 0.87 1.02 3.03 Outlet 55 m³/s 2.871 2.816 2.761 2.705 2.648 2.528 2.392 2.234 2.040 1.801 1.530 0.914 Inlet 57 SMB650/4-3AC 1325 42.3 2.89 1.461 W/(L/s) 0.49 0.51 0.53 0.54 0.56 0.60 0.64 0.69 0.75 0.84 0.95 1.32 Outlet 61 Peak Amps Input kw dba @ 3m Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Please contact Elta Fans for SFP data. 126 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MULTIFLOW SMB Dimensional Data E 4 HOLES Ø D DUCTMATE FLANGE AIR FLOW A B C A B C D E Ductmate Flange Weight kg SMB400 400 450 300 9 421 25 16 SMB450 450 500 400 9 471 25 23 SMB500 500 550 400 9 521 25 27 SMB550 550 617 500 11 586 35 41 SMB650 650 717 500 11 686 35 47 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 127

MULTIFLOW SMB Accessories Transformer Controller Mounting Brackets (each) Flexible Connections (each) AV Mounts (set of 4) Splitter Silencer Wiring Diagram SMB400/4-1AC 149-TC14 060-MFB-01 063-0400-MFB 062-002 068-0400-MFB 152-104A SMB450/4-1AC 149-TC14 060-MFB-01 063-0450-MFB 062-002 068-0450-MFB 152-104A SMB500/4-1AC 149-TC14 060-MFB-01 063-0500-MFB 062-002 068-0500-MFB 152-104A SMB550/4-1AC 149-TC110 060-MFB-01 063-0550-MFB 062-003 068-0550-MFB 152-104A SMB650/4-1AC 149-TC116 060-MFB-01 063-0650-MFB 062-003 068-0650-MFB 152-104A Transformer Controller Mounting Brackets (each) Flexible Connections (each) AV Mounts (set of 4) Splitter Silencer Wiring Diagram SMB400/4-3AC 149-TC33 060-MFB-01 063-0400-MFB 062-002 068-0400-MFB 152-106A SMB450/4-3AC 149-TC33 060-MFB-01 063-0450-MFB 062-002 068-0450-MFB 152-106A SMB500/4-3AC 149-TC33 060-MFB-01 063-0500-MFB 062-002 068-0500-MFB 152-106A SMB550/4-3AC 149-TC35 060-MFB-01 063-0550-MFB 062-003 068-0550-MFB 152-106A SMB650/4-3AC 149-TC35 060-MFB-01 063-0650-MFB 062-003 068-0650-MFB 152-106A 128 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MULTIFLOW SMB Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 129

TWINFLOW STD Centrifugal Twin Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 7 standard sizes from 125mm to 500mm. ü Air volume flow rates up to 1.89 m³/s. ü Static pressures up to 1028 Pa. ü Suitable for operating temperatures up to +60 C. ü Available in EC. CASING Robust 1.2mm galvanised mild steel sheet casing. The casing is specially manufactured using integral motor mounting plates to provide additional rigidity for the casings. Each casing provides spigots to suit standard circular ducting. EPDM (Ethylene Propylene) rubber U shaped seals (being ozone and UV stable) are used to ensure a good seal back to the duct that is to be attached. Top & bottom access is provided as a standard feature to facilitate ease of maintenance and cleaning. IMPELLER High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit. MOTORS The twin range of units have an EC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability All motors are suitable for use in ambient air conditions up to 60 C. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All STD units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Toilets Bathrooms Hotels Schools Colleges Libraries ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-POT Flexible Connections : 018 FLEX Clamps (each) : 018 CLAMP AV Mounts (Set of 4) : 062 SEL Damper : 018 DAMPER Silencer : 068 JF Panel Filter : 018 FILT-P Electric Heater Battery : 018 HEA ACO Panel : 149-ACO 130 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

TWINFLOW STD Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz STD125-1EC STD150-1EC STD200-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 m³/s 0.123 0.121 0.118 0.115 0.112 0.106 0.100 0.092 0.084 0.075 0.065 0.037 Overall Efficiency % Motor Electrical Data Peak Amps Input kw 24.3 1.21 0.151 dba @ 3m Inlet 52 Outlet 54 W/(L/s) 1.16 1.18 1.20 1.22 1.25 1.31 1.38 1.47 1.59 1.76 2.01 3.39 Breakout 45 m³/s 0.114 0.111 0.107 0.104 0.101 0.093 0.086 0.077 0.068 0.057 0.046 0.019 24.6 0.94 0.108 Inlet 48 Outlet 48 W/(L/s) 0.90 0.91 0.94 0.96 0.99 1.06 1.16 1.30 1.50 1.80 2.28 5.48 Breakout 42 m³/s 0.067 0.063 0.059 0.053 0.046 0.030 0.014 20.4 0.30 0.034 Inlet 40 Outlet 38 W/(L/s) 0.42 0.45 0.49 0.54 0.63 1.03 2.25 Breakout 42 m³/s 0.024 0.007 6.6 0.08 0.005 Inlet *20 Outlet *20 W/(L/s) 0.21 0.71 Breakout *20 m³/s 0.146 0.143 0.140 0.137 0.133 0.125 0.116 0.107 0.098 0.089 0.079 0.057 28.2 1.17 0.134 Inlet 53 Outlet 53 W/(L/s) 0.91 0.93 0.94 0.96 0.99 1.05 1.12 1.22 1.35 1.49 1.68 2.31 Breakout 46 m³/s 0.134 0.129 0.125 0.121 0.116 0.107 0.098 0.089 0.079 0.069 0.058 0.033 28.5 0.93 0.106 Inlet 47 Outlet 50 W/(L/s) 0.73 0.76 0.78 0.81 0.84 0.92 1.01 1.12 1.27 1.47 1.77 3.18 Breakout 43 m³/s 0.084 0.076 0.069 0.062 0.055 0.039 0.023 0.010 24.7 0.30 0.035 Inlet 38 Outlet 43 W/(L/s) 0.33 0.37 0.42 0.47 0.53 0.76 1.34 3.18 Breakout 43 m³/s 0.028 5.5 0.08 0.005 Inlet *20 Outlet *20 W/(L/s) 0.16 Breakout *20 m³/s 0.274 0.267 0.261 0.254 0.248 0.235 0.221 0.208 0.194 0.179 0.164 0.130 32.8 1.90 0.240 Inlet 57 Outlet 57 W/(L/s) 0.81 0.84 0.87 0.90 0.93 0.99 1.06 1.14 1.23 1.33 1.45 1.81 Breakout 51 m³/s 0.229 0.222 0.216 0.209 0.201 0.185 0.168 0.149 0.130 0.111 0.093 0.060 32.0 1.32 0.173 Inlet 50 Outlet 51 W/(L/s) 0.64 0.65 0.67 0.69 0.72 0.78 0.86 0.96 1.11 1.32 1.60 2.56 Breakout 45 m³/s 0.142 0.129 0.116 0.104 0.090 0.057 0.036 0.020 25.8 0.41 0.074 Inlet 40 Outlet 41 W/(L/s) 0.34 0.34 0.36 0.40 0.48 0.87 1.49 2.66 Breakout 35 m³/s 0.050 0.013 4.8 0.08 0.011 Inlet *20 Outlet *20 W/(L/s) 0.21 0.79 Breakout *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Please contact Elta Fans for full sound data. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 131

TWINFLOW STD Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz STD250-1EC STD315-1EC STD400-1EC ST500-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 52 m³/s 0.327 0.318 0.307 0.295 0.281 0.251 0.218 0.187 0.156 0.126 0.096 0.048 29.8 1.89 0.223 Outlet 52 W/(L/s) 0.58 0.60 0.62 0.65 0.67 0.75 0.85 0.99 1.19 1.48 1.97 4.18 Breakout 47 Inlet 47 m³/s 0.269 0.256 0.242 0.227 0.210 0.173 0.135 0.100 0.070 0.045 0.024 30.8 1.08 0.126 Outlet 48 W/(L/s) 0.39 0.41 0.44 0.46 0.50 0.60 0.78 1.07 1.57 2.52 4.88 Breakout 42 Inlet 36 m³/s 0.168 0.147 0.119 0.088 0.059 0.015 26.7 0.31 0.035 Outlet 35 W/(L/s) 0.18 0.21 0.26 0.35 0.52 2.26 Breakout 27 Inlet *20 m³/s 0.064 9.7 0.08 0.006 Outlet *20 W/(L/s) 0.08 Breakout *20 Inlet 54 m³/s 0.625 0.614 0.602 0.590 0.577 0.550 0.521 0.489 0.453 0.411 0.362 0.220 42.0 1.96 0.428 Outlet 53 W/(L/s) 0.61 0.63 0.65 0.67 0.69 0.74 0.79 0.85 0.92 0.99 1.10 1.55 Breakout 50 Inlet 43 m³/s 0.493 0.480 0.465 0.450 0.434 0.397 0.352 0.294 0.207 0.038 41.5 1.04 0.217 Outlet 43 W/(L/s) 0.41 0.42 0.44 0.46 0.49 0.54 0.61 0.71 0.93 3.71 Breakout 40 Inlet 36 m³/s 0.296 0.272 0.243 0.207 0.152 32.7 0.32 0.061 Outlet 32 W/(L/s) 0.20 0.22 0.25 0.29 0.38 Breakout 28 Inlet *20 m³/s 0.097 4.8 0.11 0.015 Outlet *20 W/(L/s) 0.16 Breakout *20 Inlet 59 m³/s 1.074 1.055 1.037 1.019 1.001 0.965 0.930 0.894 0.858 0.821 0.783 0.702 46.9 4.25 0.914 Outlet 62 W/(L/s) 0.80 0.82 0.83 0.85 0.87 0.90 0.94 0.98 1.02 1.07 1.12 1.25 Breakout 55 Inlet 51 m³/s 0.844 0.819 0.795 0.772 0.751 0.709 0.668 0.626 0.582 0.535 0.481 0.317 46.4 2.33 0.491 Outlet 52 W/(L/s) 0.54 0.56 0.58 0.60 0.61 0.65 0.70 0.75 0.81 0.88 0.98 1.41 Breakout 47 Inlet 40 m³/s 0.514 0.481 0.446 0.408 0.365 0.259 0.035 36.3 0.64 0.139 Outlet 41 W/(L/s) 0.24 0.27 0.29 0.32 0.36 0.49 2.70 Breakout 34 Inlet *20 m³/s 0.172 21.1 0.20 0.034 Outlet *20 W/(L/s) 0.04 Breakout *20 Inlet 51 m³/s 1.445 1.419 1.390 1.359 1.325 1.252 1.172 1.088 1.001 0.914 0.823 0.621 49.1 3.50 0.774 Outlet 54 W/(L/s) 0.49 0.50 0.52 0.53 0.55 0.60 0.65 0.70 0.77 0.84 0.92 1.17 Breakout 53 Inlet 45 m³/s 1.184 1.127 1.076 1.028 0.981 0.890 0.797 0.697 0.584 0.441 0.205 50.0 1.99 0.435 Outlet 47 W/(L/s) 0.33 0.34 0.36 0.38 0.40 0.45 0.50 0.58 0.69 0.90 1.72 Breakout 44 Inlet 32 m³/s 0.696 0.631 0.559 0.477 0.378 42.2 0.52 0.109 Outlet 32 W/(L/s) 0.14 0.16 0.19 0.22 0.28 Breakout 30 Inlet *20 m³/s 0.235 39.0 0.19 0.005 Outlet *20 W/(L/s) 0.02 Breakout *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. When correctly installed the fan will be inaudible. (less than 20dBA) 132 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

TWINFLOW STD Performance, SFP & Electrical Data THREE Phase - 380V to 480V / 50Hz or 60Hz STD500-3EC Control Voltage 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 58 m³/s 1.819 1.797 1.774 1.751 1.727 1.677 1.625 1.570 1.512 1.453 1.392 1.265 51.8 2.29 1.482 Outlet 60 W/(L/s) 0.76 0.77 0.79 0.80 0.82 0.85 0.88 0.92 0.97 1.01 1.06 1.17 Breakout 57 Inlet 51 m³/s 1.480 1.443 1.407 1.373 1.340 1.274 1.208 1.141 1.072 0.997 0.916 0.710 52.5 1.32 0.806 Outlet 52 W/(L/s) 0.48 0.50 0.52 0.54 0.56 0.60 0.64 0.69 0.74 0.80 0.87 1.10 Breakout 50 Inlet 37 m³/s 0.875 0.827 0.775 0.719 0.656 0.505 0.292 47.1 0.47 0.192 Outlet 38 W/(L/s) 0.20 0.22 0.24 0.26 0.29 0.37 0.58 Breakout 36 Inlet 20 m³/s 0.304 14.8 0.16 0.025 Outlet 20 W/(L/s) 0.08 Breakout 20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Please contact Elta Fans for full sound data. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 133

TWINFLOW STD Dimensional Data E A H G ØD C B 74 F J NO OF HOLES Ø K A B C D E F G H J K Weight kg STD125 125 570 555 265 600 537 580 642 26 STD150 150 STD200 305 200 8 32 607 657 702 569 682 679 4 STD250 335 250 35 STD315 755 869 405 315 914 894 867 55 700 STD400 851 1024 477 400 1119 1069 1003 77 13 STD500 993 1259 606 500 1354 800 1304 1145 6 116 Dimensions are in mm. 134 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

TWINFLOW STD Accessories Electronic Controller Flexible Connections (each) Clamps (each) AV Mounts (set of 4) Panel Filter Electric Heater Battery STD100-1EC 149-POT-10 018-0100-FLEX 018-0100-CLAMP 062-SEL03 018-0100-FILT-P 018-0100-HEAT-1 STD125-1EC 149-POT-10 018-0125-FLEX 018-125-CLAMP 062-SEL03 018-0125-FILT-P 018-0125-HEAT-1 STD150-1EC 149-POT-10 018-0150-FLEX 018-150-CLAMP 062-SEL03 018-0150-FILT-P 018-0150-HEAT-1 STD200-1EC 149-POT-10 018-0200-FLEX 018-200-CLAMP 062-SEL03 018-0200-FILT-P 018-0200-HEAT-1 STD250-1EC 149-POT-10 018-0250-FLEX 018-250-CLAMP 062-SEL03 018-0250-FILT-P 018-0250-HEAT-1 STD315-1EC 149-POT-10 018-0315-FLEX 018-315-CLAMP 062-SEL03 018-0315-FILT-P 018-0315-HEA1/3 STD400-1EC 149-POT-10 018-0400-FLEX 018-400-CLAMP 062-SEL04 018-0400-FILT-P 018-0400-HEA1/3 STD500-1EC 149-POT-10 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 018-0500-HEAT-3 018-0500-HEAT-4 STD500-3EC 149-POT-10 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 018-0500-HEAT-3 018-0500-HEAT-4 ACOP Standard Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram STD100-1EC 149-ACO14E 068-0100-JF1 068-0100-JF2 068-0100-JF3 068-0100-JF4 152-000236 STD125-1EC 149-ACO14E 068-0125-JF1 068-0125-JF2 068-0125-JF3 068-0125-JF4 152-000236 STD150-1EC 149-ACO14E 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-000236 STD200-1EC 149-ACO14E 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-000236 STD250-1EC 149-ACO14E 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-000236 STD315-1EC 149-ACO14E 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-000244 STD400-1EC 149-ACO14E 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 152-000244 STD500-1EC 149-ACO14E Please enquire 152-000244 STD500-3EC 149-ACO14E Please enquire 152-2MOEA03K3 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 135

TWINFLOW STD Notes 136 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUIETFLOW SQT Centrifugal Twin Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 7 standard sizes from 125mm to 500mm. ü Air volume flow rates up to 1.819 m³/s. ü Static pressures up to 1029 Pa. ü Suitable for operating temperatures up to +60 C. ü Available in EC. CASING The robust 1.2mm galvanised mild steel sheet casing, is treated internally with a Class O rated (BS 476 Parts 6 and 7) fire resistant acoustic foam lining with a fire resistant polymeric coating. The wrap around folded casing is specially manufactured using integral motor mounting plates to provide additional rigidity for the casings. Each casing provides spigots to suit standard circular ducting. EPDM (Ethylene Propylene) rubber U shaped seals (being ozone and UV stable) are used to ensure a good seal back to the duct that is to be attached. A removable lid is provided as a standard feature to facilitate ease of maintenance and cleaning. IMPELLER High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit. MOTORS The twin range of units have an EC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability All motors are suitable for use in ambient air conditions up to +60 C. Electrical connection shall be via an IP55 terminal box mounted on the side for easy customer connection. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SQT units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Toilets and Bathrooms Hotels Kitchens Residential Offices Libraries ACCESSORIES For full accessories & controls information please visit eltaselect.com ACO Panel : 149-ACO Electronic Controller :149-POT Flexible Connections : 018 FLEX Clamps (each) : 018 CLAMP AV Mounts (Set of 4) : 062 SEL Damper : 018 DAMPER Silencer : 068 JF Panel Filter : 018 FILT-P Electric Heater Battery : 018 HEA Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 137

QUIETFLOW SQT Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SQT125-1ECL SQT150-1ECL SQT200-1ECL Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 50 m³/s 0.123 0.121 0.118 0.115 0.112 0.106 0.100 0.092 0.084 0.075 0.065 0.037 24.3 1.21 0.151 Outlet 52 W/(L/s) 1.16 1.18 1.20 1.22 1.25 1.31 1.38 1.47 1.59 1.76 2.01 3.39 Breakout 42 Inlet 48 m³/s 0.114 0.111 0.107 0.104 0.101 0.093 0.086 0.077 0.068 0.057 0.046 0.019 24.6 0.94 0.108 Outlet 48 W/(L/s) 0.90 0.91 0.94 0.96 0.99 1.06 1.16 1.30 1.50 1.80 2.28 5.48 Breakout 42 Inlet 40 m³/s 0.067 0.063 0.059 0.053 0.046 0.030 0.014 20.4 0.30 0.034 Outlet 38 W/(L/s) 0.42 0.45 0.49 0.54 0.63 1.03 2.25 Breakout 42 Inlet *20 m³/s 0.024 0.007 6.6 0.08 0.005 Outlet *20 W/(L/s) 0.21 0.71 Breakout *20 Inlet 50 m³/s 0.146 0.143 0.140 0.137 0.133 0.125 0.116 0.107 0.098 0.089 0.079 0.057 28.2 1.17 0.134 Outlet 50 W/(L/s) 0.91 0.93 0.94 0.96 0.99 1.05 1.12 1.22 1.35 1.49 1.68 2.31 Breakout 43 Inlet 47 m³/s 0.134 0.129 0.125 0.121 0.116 0.107 0.098 0.089 0.079 0.069 0.058 0.033 28.5 0.93 0.106 Outlet 50 W/(L/s) 0.73 0.76 0.78 0.81 0.84 0.92 1.01 1.12 1.27 1.47 1.77 3.18 Breakout 43 Inlet 38 m³/s 0.084 0.076 0.069 0.062 0.055 0.039 0.023 0.010 24.7 0.30 0.035 Outlet 43 W/(L/s) 0.33 0.37 0.42 0.47 0.53 0.76 1.34 3.18 Breakout 43 Inlet *20 m³/s 0.028 5.5 0.08 0.005 Outlet *20 W/(L/s) 0.16 Breakout *20 Inlet 54 m³/s 0.274 0.267 0.261 0.254 0.248 0.235 0.221 0.208 0.194 0.179 0.164 0.130 32.8 1.90 0.240 Outlet 54 W/(L/s) 0.81 0.84 0.87 0.90 0.93 0.99 1.06 1.14 1.23 1.33 1.45 1.81 Breakout 48 Inlet 50 m³/s 0.229 0.222 0.216 0.209 0.201 0.185 0.168 0.149 0.130 0.111 0.093 0.060 32.0 1.32 0.173 Outlet 51 W/(L/s) 0.64 0.65 0.67 0.69 0.72 0.78 0.86 0.96 1.11 1.32 1.60 2.56 Breakout 45 Inlet 40 m³/s 0.142 0.129 0.116 0.104 0.090 0.057 0.036 0.020 25.8 0.41 0.074 Outlet 41 W/(L/s) 0.34 0.34 0.36 0.40 0.48 0.87 1.49 2.66 Breakout 35 Inlet *20 m³/s 0.050 0.013 4.8 0.08 0.011 Outlet *20 W/(L/s) 0.21 0.79 Breakout *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 138 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUIETFLOW SQT Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SQT250-1ECL SQT315-1ECL SQT400-1ECL SQT500-1ECL Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 50 m³/s 0.327 0.318 0.307 0.295 0.281 0.251 0.218 0.187 0.156 0.126 0.096 0.048 29.8 1.89 0.223 Outlet 50 W/(L/s) 0.58 0.60 0.62 0.65 0.67 0.75 0.85 0.99 1.19 1.48 1.97 4.18 Breakout 44 Inlet 47 m³/s 0.269 0.256 0.242 0.227 0.210 0.173 0.135 0.100 0.070 0.045 0.024 30.8 1.08 0.126 Outlet 48 W/(L/s) 0.39 0.41 0.44 0.46 0.50 0.60 0.78 1.07 1.57 2.52 4.88 Breakout 42 Inlet 36 m³/s 0.168 0.147 0.119 0.088 0.059 0.015 26.7 0.31 0.035 Outlet 35 W/(L/s) 0.18 0.21 0.26 0.35 0.52 2.26 Breakout 27 Inlet *20 m³/s 0.064 9.7 0.08 0.006 Outlet *20 W/(L/s) 0.08 Breakout *20 Inlet 51 m³/s 0.625 0.614 0.602 0.590 0.577 0.550 0.521 0.489 0.453 0.411 0.362 0.220 42.0 1.96 0.428 Outlet 51 W/(L/s) 0.61 0.63 0.65 0.67 0.69 0.74 0.79 0.85 0.92 0.99 1.10 1.55 Breakout 47 Inlet 43 m³/s 0.493 0.480 0.465 0.450 0.434 0.397 0.352 0.294 0.207 0.038 41.5 1.04 0.217 Outlet 43 W/(L/s) 0.41 0.42 0.44 0.46 0.49 0.54 0.61 0.71 0.93 3.71 Breakout 40 Inlet 36 m³/s 0.296 0.272 0.243 0.207 0.152 32.7 0.32 0.061 Outlet 32 W/(L/s) 0.20 0.22 0.25 0.29 0.38 Breakout 28 Inlet *20 m³/s 0.097 4.8 0.11 0.015 Outlet *20 W/(L/s) 0.16 Breakout *20 Inlet 58 m³/s 1.074 1.055 1.037 1.019 1.001 0.965 0.930 0.894 0.858 0.821 0.783 0.702 46.9 4.25 0.914 Outlet 57 W/(L/s) 0.80 0.82 0.83 0.85 0.87 0.90 0.94 0.98 1.02 1.07 1.12 1.25 Breakout 53 Inlet 51 m³/s 0.844 0.819 0.795 0.772 0.751 0.709 0.668 0.626 0.582 0.535 0.481 0.317 46.4 2.33 0.491 Outlet 52 W/(L/s) 0.54 0.56 0.58 0.60 0.61 0.65 0.70 0.75 0.81 0.88 0.98 1.41 Breakout 47 Inlet 40 m³/s 0.514 0.481 0.446 0.408 0.365 0.259 0.035 36.3 0.64 0.139 Outlet 41 W/(L/s) 0.24 0.27 0.29 0.32 0.36 0.49 2.70 Breakout 34 Inlet *20 m³/s 0.172 21.1 0.20 0.034 Outlet *20 W/(L/s) 0.04 Breakout *20 Inlet 51 m³/s 1.445 1.419 1.390 1.359 1.325 1.252 1.172 1.088 1.001 0.914 0.823 0.621 49.1 3.50 0.774 Outlet 51 W/(L/s) 0.49 0.50 0.52 0.53 0.55 0.60 0.65 0.70 0.77 0.84 0.92 1.17 Breakout 50 Inlet 45 m³/s 1.184 1.127 1.076 1.028 0.981 0.890 0.797 0.697 0.584 0.441 0.205 50.0 1.99 0.435 Outlet 47 W/(L/s) 0.33 0.34 0.36 0.38 0.40 0.45 0.50 0.58 0.69 0.90 1.72 Breakout 44 Inlet 32 m³/s 0.696 0.631 0.559 0.477 0.378 42.2 0.52 0.109 Outlet 32 W/(L/s) 0.14 0.16 0.19 0.22 0.28 Breakout 30 Inlet *20 m³/s 0.235 39.0 0.19 0.005 Outlet *20 W/(L/s) 0.02 Breakout *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 139

QUIETFLOW SQT Performance, SFP & Electrical Data THREE Phase - 380V to 480V / 50Hz or 60Hz SQT500-3ECL Control Voltage 10V 8V 5V 2V Airflow SFP Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m Inlet 58 m³/s 1.819 1.797 1.774 1.751 1.727 1.677 1.625 1.570 1.512 1.453 1.392 1.265 51.8 2.29 1.482 Outlet 58 W/(L/s) 0.76 0.77 0.79 0.80 0.82 0.85 0.88 0.92 0.97 1.01 1.06 1.17 Breakout 56 Inlet 51 m³/s 1.480 1.443 1.407 1.373 1.340 1.274 1.208 1.141 1.072 0.997 0.916 0.710 52.5 1.32 0.806 Outlet 52 W/(L/s) 0.48 0.50 0.52 0.54 0.56 0.60 0.64 0.69 0.74 0.80 0.87 1.10 Breakout 50 Inlet 37 m³/s 0.875 0.827 0.775 0.719 0.656 0.505 0.292 47.1 0.47 0.192 Outlet 38 W/(L/s) 0.20 0.22 0.24 0.26 0.29 0.37 0.58 Breakout 36 Inlet *20 m³/s 0.304 14.8 0.16 0.025 Outlet *20 W/(L/s) 0.08 Breakout *20 DCV CONTROLS Demand Control Ventilation (DCV) EC options available, refer to pages 228-229 for DCV information and page 144 for product information; to order add DCV to product code: SQT100-ECL with DCV order SQTDCV100-ECL. A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. * At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. When correctly installed the fan will be inaudible (less than 20dBA). 140 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUIETFLOW SQT Dimensional Data E Ø D C A H B 74 G F J NO OF HOLES Ø K A B C D E F G H J K Weight kg SQT125 125 570 555 261 575 537 580 640 28 SQT150 150 SQT200 303 200 680 679 8 33 602 650 700 569 4 SQT250 333 250 719 39 SQT315 749 864 401 315 914 700 894 866 56 SQT400 846 1018 473 400 1118 1068 86 13 SQT500 985 1253 602 500 1353 800 1303 1141 6 124 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 141

QUIETFLOW SQT Accessories Electronic Controller Flexible Connections (each) Clamps (each) AV Mounts (set of 4) Panel Filter Electric Heater Battery ACOP Standard SQT100-1EC 149-POT-10 018-0100-FLEX 018-0100-CLAMP 062-SEL03 018-0100-FILT-P 018-0100-HEAT-1 149-ACO14E SQT125-1EC 149-POT-10 018-0125-FLEX 018-125-CLAMP 062-SEL03 018-0125-FILT-P 018-0125-HEAT-1 149-ACO14E SQT150-1EC 149-POT-10 018-0150-FLEX 018-150-CLAMP 062-SEL03 018-0150-FILT-P 018-0150-HEAT-1 149-ACO14E SQT200-1EC 149-POT-10 018-0200-FLEX 018-200-CLAMP 062-SEL03 018-0200-FILT-P 018-0200-HEAT-1 149-ACO14E SQT250-1EC 149-POT-10 018-0250-FLEX 018-250-CLAMP 062-SEL03 018-0250-FILT-P 018-0250-HEAT-1 149-ACO14E SQT315-1EC 149-POT-10 018-0315-FLEX 018-315-CLAMP 062-SEL03 018-0315-FILT-P 018-0315-HEA1/3 149-ACO14E SQT400-1EC 149-POT-10 018-0400-FLEX 018-400-CLAMP 062-SEL04 018-0400-FILT-P 018-0400-HEA1/3 149-ACO14E 018-0500-HEAT-3 SQT500-1EC 149-POT-10 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 149-ACO14E 018-0500-HEAT-4 018-0500-HEAT-3 SQT500-3EC 149-POT-10 018-0500-FLEX 018-500-CLAMP 062-SEL05 018-0500-FILT-P 149-ACO14E 018-0500-HEAT-4 Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram SQT100-1EC 068-0100-JF1 068-0100-JF2 068-0100-JF3 068-0100-JF4 152-000236 SQT125-1EC 068-0125-JF1 068-0125-JF2 068-0125-JF3 068-0125-JF4 152-000236 SQT150-1EC 068-0150-JF1 068-0150-JF2 068-0150-JF3 068-0150-JF4 152-000236 SQT200-1EC 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-000236 SQT250-1EC 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-000236 SQT315-1EC 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-000244 SQT400-1EC 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 152-000244 SQT500-1EC Please enquire 152-000244 SQT500-3EC Please enquire 152-2MOEA03K3 DCV Accessories Sensors Can be used with all DCV products. 149-DCV-CO2 149-DCV-DPT150 149-DCV-H1 149-DCV-HRT 149-DCV-PIR 149-DCV-TRT 142 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUIETFLOW SQT Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 143

QUIETFLOW SQS DCV Centrifugal Box Fan OVERVIEW The Quietflow SQS...EC DCV incorporates the BAT (Best Available Technology) Vpro/ZAvBlue backward curved impeller, with three dimensional profiled blades powered by the ultra reliable Ziehl-Abegg EC (electronically commutated) external rotor motor. The range of acoustically treated single in-line fans are suitable for Demand Control Ventilation via matching sensors. Refer to Quietflow SQS on pages 113-120 for Performance & Electrical Data. For DCV information refer to pages 228-229. QUICK FACTS ü 8 sizes from 100mm to 500mm. ü Air volume flow rates up to 1.789 m³/s (EC). ü Static pressures up to 930 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Robust galvanised sheet steel casing. ü Available in EC. QUIETFLOW SQT DCV Centrifugal Box Fan OVERVIEW The Quietflow SQT DCV...ECL incorporates the BAT (Best Available Technology) Vpro/ZAvBlue backward curved impeller, with three dimensional profiled blades powered by the ultra reliable Ziehl-Abegg EC (electronically commutated) external rotor motor. The range of acoustically treated in-line centrifugal twin fans are suitable for Demand Control Ventilation via matching sensors. Refer to Quietflow SQT on page 137-143 for Performance & Electrical Data. For DCV information refer to pages 228-229. QUICK FACTS ü 7 standard sizes from 125mm to 500mm. ü Air volume flow rates up to 1.819 m³/s. ü Static pressures up to 1029 Pa. ü Suitable for operating temperatures up to +60 C. ü Available in EC. 144 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Roof Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 145

146 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

HERITAGE SCH Roof Mounted Vertical Discharge Centrifugal Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 5 standard sizes from 315mm to 500mm. ü Air volume flow rates up to 1.936 m³/s. ü Static pressures up to 6 00 Pa. ü Suitable for operating temperatures up to +50 C. ü Can be mounted at angles up to 30. ü Available in AC. CASING MOTORS TYPICAL APPLICATIONS Roof The all metal fan casing provides a long lasting and robust construction. The casings are manufactured from pregalvanised sheet steel. The wind band shall incorporate quick-release toggle clamps to provide easy access for cleaning and maintenance. All SCH units can be mounted at angles up to 30. IMPELLER Aerodynamically designed backward curved centrifugal impellers constructed in aluminium or galvanised sheet steel. Impellers are balanced to ISO 14694 Grade G6.3. Motors shall be external rotor motor, with sealed for life ball bearings. Motors shall be minimum IP44 protected and minimum Class B insulation. All units are suitable for operating temperatures up to +50 C. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCH units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). Industrial Commercial Kitchens and Catering Hospitals Bakeries Forges and Foundries ACCESSORIES For full accessories & controls information please visit eltaselect.com Transformer Controller : 149-TC Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 147

HERITAGE SCH Performance & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min SCH315/4-2 1395 SCH350/4-2 1465 SCH400/4-2 1390 SCH450/4-2 1240 Airflow Airflow m³/s @ Static Pressure Pa. 0 50 100 150 200 250 300 400 500 Overall Efficiency % Motor Electrical Data Peak Amps SC Amps Input kw dba @ 3m m³/s 0.481 0.416 0.338 0.242 0.131 Inlet 48 23.9 0.69 4.0 0.150 W/(L/s) 0.29 0.36 0.46 0.63 1.11 Outlet - m³/s 0.751 0.700 0.642 0.577 0.500 0.405 0.280 Inlet 51 36.4 1.39 7.5 0.280 W/(L/s) 0.31 0.36 0.41 0.47 0.56 0.69 0.94 Outlet - m³/s 1.042 00.981 0.915 0.842 0.760 0.668 0.562 0.285 Inlet 54 34.4 2.42-0.490 W/(L/s) 0.40 0.45 0.51 0.57 0.64 0.74 0.88 1.44 Outlet - m³/s 1.229 1.141 1.055 0.972 0.891 0.810 0.726 0.502 Inlet 57 32.7 3.15 21.0 0.679 W/(L/s) 0.46 0.50 0.56 0.63 0.72 0.81 0.93 1.32 Outlet - THREE Phase - 380V to 415V / 50Hz Speed r/min SCH315/4-3 1345 SCH350/4-3 1360 SCH400/4-3 1430 SCH450/4-3 SCH500/4-3 1295 985 1370 1160 Airflow Airflow m³/s @ Static Pressure Pa. 0 50 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps SC Amps Input kw dba @ 3m m³/s 0.487 0.430 0.366 0.291 0.195 0.066 Inlet 48 30.1 0.30 2.2 0.145 W/(L/s) 0.26 0.32 0.40 0.50 0.70 1.66 Outlet - m³/s 0.646 0.594 0.541 0.488 0.431 0.359 Inlet 51 32.9 0.61 3.1 0.270 W/(L/s) 0.35 0.40 0.47 0.55 0.64 0.76 Outlet - m³/s 0.855 0.807 0.750 0.691 0.633 0.573 0.508 0.422 0.150 Inlet 54 32.1 1.36 8.4 0.480 W/(L/s) 0.49 0.54 0.60 0.67 0.75 0.84 0.94 1.11 2.64 Outlet - m³/s 1.294 1.183 1.105 1.032 0.957 0.877 0.789 0.693 0.580 Inlet 57 33.9 1.47 0.710 W/(L/s) 0.46 0.50 0.55 0.61 0.69 0.78 0.89 1.03 1.23 Outlet - 8.8 m³/s 1.030 0.919 0.796 0.670 0.540 24.2 0.77 0.445 Inlet - W/(L/s) 0.37 0.43 0.52 0.65 0.83 Outlet - m³/s 1.936 1.843 1.758 1.675 1.591 1.505 1.418 1.329 1.240 1.057 Inlet 61 40.7 2.80 1.300 W/(L/s) 0.58 0.61 0.65 0.69 0.75 0.81 0.88 0.96 1.04 1.23 Outlet - 15.6 m³/s 1.687 1.582 1.474 1.364 1.250 1.131 1.007 0.875 0.732 33.2 1.51 0.920 Inlet - W/(L/s) 0.48 0.52 0.56 0.63 0.70 0.80 0.91 1.06 1.23 Outlet - Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: C. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 148 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

HERITAGE SCH Dimensional Data A D B E F C A B C D E F Weight kg SCH315 520 310 430 50 310 410 16 SCH350 670 420 520 50 400 500 26 SCH400 670 420 520 50 400 500 26 SCH450 900 540 740 60 620 720 49 SCH500 900 540 740 60 620 720 51/57* Dimensions are in mm. *The higher weight shown applies to the /4-2 & /4-3 versions. Accessories Transformer Controller SCH315/4-2 SCH350/4-2 SCH400/4-2 SCH450/4-2 149-TC12 149-TC12 149-TC14 149-TC18 Transformer Controller SCH315/4-3 SCH350/4-3 SCH400/4-3 SCH450/4-3 SCH500/4-3 149-TC33 149-TC33 149-TC33 149-TC33 149-TC35 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 149

HERITAGE SCH Notes 150 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

HERITAGE SCHT Roof Mounted Vertical Discharge Centrifugal Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 5 standard sizes from 400mm to 630mm. ü Air volume flow rates up to 4.172 m³/s. ü Static pressures up to 1000 Pa. ü Suitable for operating temperatures up to +50 C. ü Can be mounted at angles up to 15. ü Available in AC. CASING The all metal cowls shall provide a long lasting and robust construction, manufactured from pressed galvanised sheet steel and powder coated after forming. The wind band shall incorporate toggle clamps to provide easy access for cleaning and maintenance. All SCHT units can be mounted at angles up to 15. IMPELLER Aerodynamically designed backward curved centrifugal impellers constructed in aluminium or galvanised sheet steel. Impellers are balanced to ISO 14694 Grade G6.3. MOTORS Motors are to be foot mounted totally enclosed metric type to IP55, with sealed for life bearings, standard industrial paint finish and Class F insulation to EN 60034-5, suitable for operating temperatures up to +50 C. Motors are to be wired via a weatherproofed cable to an IP55 protected terminal box. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCHT units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Industrial Commercial Kitchens and Catering Hospitals Bakeries Forges and Foundries ACCESSORIES For full accessories & controls information please visit eltaselect.com Inverter : 149-ODE Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 151

HERITAGE SCHT Performance & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SCHT400/4-3 1445 SCHT450/4-3 1455 SCHT500/4-3 1455 SCHT560/4-3 1465 SCHT630/4-3 1472 Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.990 0.968 0.946 0.922 0.898 0.846 0.789 0.725 0.651 0.560 0.438 Inlet 55 33.3 1.43 0.590 W/(L/s) 0.50 0.52 0.55 0.58 0.61 0.67 0.74 0.82 0.92 1.05 1.28 Outlet - m³/s 1.564 1.527 1.490 1.452 1.414 1.337 1.257 1.175 1.089 0.997 0.897 0.649 Inlet 58 46.4 1.54 0.770 W/(L/s) 0.40 0.41 0.43 0.45 0.47 0.52 0.57 0.63 0.69 0.77 0.86 1.15 Outlet - m³/s 2.062 2.004 1.954 1.909 1.867 1.788 1.713 1.638 1.563 1.485 1.402 1.206 Inlet 62 46.3 2.34 1.300 W/(L/s) 0.49 0.50 0.52 0.54 0.56 0.61 0.66 0.72 0.78 0.84 0.91 1.08 Outlet - m³/s 2.672 2.629 2.588 2.548 2.510 2.437 2.366 2.295 2.225 2.153 2.079 1.920 Inlet 66 44.3 4.53 2.380 W/(L/s) 0.66 0.68 0.71 0.73 0.75 0.80 0.85 0.91 0.96 1.02 1.08 1.21 Outlet - m³/s 4.172 4.124 4.078 4.033 3.989 3.904 3.821 3.739 3.657 3.576 3.494 3.326 Inlet 71 53.0 7.78 4.230 W/(L/s) 0.73 0.75 0.76 0.78 0.80 0.83 0.87 0.91 0.95 1.00 1.05 1.15 Outlet - Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: C. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 152 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

HERITAGE SCHT Dimensional Data A D B E F C A B C D E F Weight kg 4 Pole SCHT400 665 420 520 50 400 500 26 SCHT450 900 540 740 60 620 720 49 SCHT500 900 540 740 60 620 720 57 SCHT560 900 540 740 60 620 720 65 SCHT630 1160 665 830 60 710 810 97 Dimensions are in mm. Accessories Inverter Controller 1PH-3PH IP66 Inverter Controller 1PH-3PH IP20 Inverter Controller 3PH-3PH IP66 Inverter Controller 3PH-3PH IP20 SCHT400/4-3 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCHT450/4-3 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 SCHT500/4-3 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 SCHT560/4-3 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 SCHT630/4-3 - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 153

HERITAGE SCHT Notes 154 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SINGLEFLOW SSDR Roof Mounted Direct Drive Centrifugal Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 5 standard sizes from 200mm to 500mm (7 models). ü Air volume flow rates up to 0.286 m³/s (AC) / 1.717 m³/s (EC). ü Static pressures up to 600 Pa (AC) / 950 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Available in AC and EC. CASING The unit casing shall be manufactured from 1.2mm thick natural finish Aluzinc. The casing shall be designed so as to minimise vibration and shall incorporate a louvered air discharge guarded against bird ingress. Drain points shall also be provided. Each casing provides an inlet spigot to suit standard circular ducting. EPDM (Ethylene Propylene) rubber U shaped seals (being ozone and UV stable) are used to ensure a good seal back to the duct that is to be attached. Top access panels shall be provided for ease of servicing. IMPELLER High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit. MOTORS The Twin range of units may have either an EC or AC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability. All motors are suitable for use in ambient air conditions up to +60 C. QUALITY MANAGEMENT All units in the Elta range are designed and manufactured to procedures as defined in BS EN ISO 9001:2008. They are also tested in accordance with BS848 Part 2 1985 (sound performance) and ISO 5801:2007 (airside performance). TYPICAL APPLICATIONS Industrial Building Banks Hospitals Offices Hotels and Shopping Malls ACCESSORIES For full accessories & controls information please visit eltaselect.com Electronic Controller :149-POT Transformer Controller : 149-TC Flexible Connections : 018 FLEX Clamps (each) : 018 CLAMP Silencer : 068 JF Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 155

SINGLEFLOW SSDR Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz Speed r/min SSDR200-1AC 2555 SSDR250L-1AC 2570 SSDR250H-1AC 2520 Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.137 0.133 0.128 0.122 0.117 0.104 0.089 0.071 0.048 0.020 Inlet 47 26.7 0.33 0.068 W/(L/s) 0.48 0.51 0.53 0.56 0.59 0.66 0.77 0.95 1.32 2.75 Outlet 42 m³/s 0.228 0.221 0.214 0.207 0.199 0.184 0.168 0.150 0.131 0.109 0.083 0.010 Inlet 52 27.5 0.64 0.144 W/(L/s) 0.63 0.65 0.67 0.70 0.73 0.79 0.87 0.97 1.10 1.29 1.64 10.06 Outlet 47 m³/s 0.286 0.277 0.268 0.260 0.251 0.234 0.217 0.200 0.181 0.161 0.139 0.086 Inlet 53 26.5 1.04 0.212 W/(L/s) 0.81 0.84 0.87 0.90 0.93 0.99 1.06 1.14 1.23 1.35 1.51 2.19 Outlet 49 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: C. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 156 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SINGLEFLOW SSDR Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SSDR200-1EC SSDR250H-1EC SSDR250L-1EC SSDR315-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.176 0.173 0.171 0.168 0.164 0.158 0.150 0.143 0.134 0.123 0.112 0.078 Inlet 55 40.1 1.10 0.137 W/(L/s) 0.72 0.74 0.75 0.77 0.78 0.82 0.86 0.91 0.97 1.05 1.15 1.55 Outlet 50 m³/s 0.167 0.163 0.159 0.155 0.150 0.142 0.132 0.123 0.112 0.101 0.089 0.060 Inlet 52 41.6 0.93 0.105 W/(L/s) 0.61 0.62 0.63 0.65 0.66 0.70 0.75 0.80 0.88 0.98 1.12 1.68 Outlet 48 m³/s 0.100 0.094 0.088 0.081 0.072 0.052 0.037 0.026 0.018 0.011 0.005 Inlet 42 29.8 0.35 0.044 W/(L/s) 0.31 0.33 0.35 0.38 0.43 0.61 0.91 1.37 2.12 3.56 7.40 Outlet 40 m³/s 0.032 0.010 Inlet 25 4.2 0.07 0.009 W/(L/s) 0.26 0.80 Outlet *20 m³/s 0.273 0.264 0.256 0.249 0.243 0.229 0.216 0.201 0.184 0.165 0.145 0.111 Inlet 53 33.8 1.89 0.236 W/(L/s) 0.71 0.72 0.73 0.75 0.76 0.80 0.86 0.93 1.03 1.18 1.38 1.89 Outlet 49 m³/s 0.225 0.220 0.214 0.207 0.200 0.184 0.165 0.144 0.122 0.103 0.086 0.060 Inlet 51 34.3 1.46 0.178 W/(L/s) 0.51 0.52 0.54 0.56 0.58 0.64 0.72 0.84 1.02 1.25 1.54 2.36 Outlet 45 m³/s 0.141 0.129 0.116 0.102 0.087 0.054 0.032 0.019 0.009 Inlet 38 28.5 0.93 0.050 W/(L/s) 0.25 0.27 0.31 0.35 0.42 0.72 1.30 2.35 4.86 Outlet 34 m³/s 0.050 0.009 Inlet *20 5.4 0.08 0.010 W/(L/s) 0.18 0.98 Outlet *20 m³/s 0.282 0.278 0.274 0.269 0.265 0.255 0.245 0.234 0.223 0.211 0.197 0.166 Inlet 57 39.5 1.93 0.241 W/(L/s) 0.82 0.84 0.85 0.87 0.89 0.93 0.97 1.02 1.08 1.14 1.22 1.43 Outlet 54 m³/s 0.250 0.243 0.236 0.229 0.222 0.208 0.194 0.181 0.167 0.153 0.138 0.108 Inlet 52 40.6 1.45 0.174 W/(L/s) 0.63 0.64 0.65 0.67 0.68 0.72 0.77 0.83 0.91 1.00 1.13 1.51 Outlet 49 m³/s 0.150 0.141 0.132 0.122 0.112 0.089 0.064 0.045 0.031 0.021 0.013 Inlet 42 35.1 0.53 0.064 W/(L/s) 0.29 0.31 0.33 0.36 0.39 0.50 0.74 1.14 1.74 2.70 4.47 Outlet 39 m³/s 0.054 0.021 Inlet *20 7.6 0.09 0.011 W/(L/s) 0.18 0.47 Outlet *20 m³/s 0.550 0.541 0.532 0.522 0.511 0.488 0.462 0.432 0.397 0.354 0.302 0.147 Inlet 53 38.3 1.88 0.403 W/(L/s) 0.72 0.73 0.75 0.77 0.78 0.82 0.86 0.91 0.98 1.06 1.17 1.78 Outlet 53 m³/s 0.425 0.409 0.393 0.375 0.357 0.317 0.269 0.211 0.134 Inlet 47 33.6 1.05 0.218 W/(L/s) 0.50 0.52 0.54 0.56 0.59 0.65 0.73 0.85 1.13 Outlet 47 m³/s 0.249 0.223 0.193 0.155 0.105 Inlet 35 26.1 0.30 0.058 W/(L/s) 0.23 0.25 0.29 0.35 0.47 Outlet 34 m³/s 0.081 Inlet *20 4.1 0.10 0.014 W/(L/s) 0.17 Outlet *20 A variable speed drive is integrated within the fan. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: C. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 157

SINGLEFLOW SSDR Performance, SFP & Electrical Data SINGLE Phase - 200V to 277V / 50Hz or 60Hz SSDR400-1EC SSDR500-1EC Control Voltage 10V 8V 5V 2V 10V 8V 5V 2V Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m m³/s 0.880 0.872 0.864 0.856 0.847 0.829 0.810 0.788 0.765 0.739 0.710 0.638 Inlet 59 42.9 4.20 0.908 W/(L/s) 1.02 1.03 1.04 1.06 1.07 1.09 1.12 1.15 1.19 1.22 1.27 1.37 Outlet 59 m³/s 0.691 0.673 0.656 0.637 0.619 0.579 0.538 0.493 0.444 0.391 0.330 0.168 Inlet 53 36.1 2.32 0.486 W/(L/s) 0.70 0.72 0.73 0.75 0.77 0.82 0.87 0.93 1.01 1.10 1.23 1.91 Outlet 53 m³/s 0.413 0.384 0.353 0.318 0.278 0.180 Inlet 40 28.8 0.61 0.131 W/(L/s) 0.32 0.34 0.36 0.40 0.44 0.61 Outlet 41 m³/s 0.136 Inlet 21 2.8 0.20 0.047 W/(L/s) 0.34 Outlet 24 m³/s 1.334 1.313 1.291 1.269 1.246 1.196 1.143 1.083 1.017 0.941 0.851 0.595 Inlet 51 51.2 3.40 0.787 W/(L/s) 0.53 0.55 0.56 0.57 0.59 0.62 0.66 0.70 0.74 0.80 0.87 1.12 Outlet 55 m³/s 1.054 1.022 0.989 0.955 0.919 0.841 0.755 0.656 0.539 0.391 0.169 Inlet 47 42.7 2.24 0.474 W/(L/s) 0.42 0.43 0.45 0.47 0.50 0.55 0.60 0.68 0.78 0.96 1.56 Outlet 47 m³/s 0.648 0.596 0.535 0.463 0.372 0.055 Inlet 34 37.5 0.59 0.124 W/(L/s) 0.18 0.20 0.23 0.26 0.31 1.24 Outlet 38 m³/s 0.231 0.036 Inlet 20 3.6 0.23 0.051 W/(L/s) 0.19 1.29 Outlet 20 THREE Phase - 380V to 415V / 50Hz Control Voltage Speed r/min SSDR500-3EC 10V 1799 SSDR500-3EC 8V 1455 SSDR500-3EC 5V 874 SSDR500-3EC 2V 292 Airflow Airflow m³/s @ Static Pressure Pa. 0 50 100 150 200 250 300 400 500 600 700 800 FMEG N Motor Electrical Data Peak Amps Output kw dba @ 3m m³/s 1.717 1.701 1.685 1.669 1.652 1.618 1.582 1.544 1.504 1.461 1.416 1.314 Inlet 57 54 1.49 2.27 W/(L/s) 0.80 0.82 0.83 0.84 0.86 0.88 0.91 0.94 0.98 1.01 1.05 1.14 Outlet 61 m³/s 1.320 1.296 1.271 1.246 1.219 1.163 1.101 1.034 0.960 0.876 0.779 0.528 Inlet 51 46 0.80 1.34 W/(L/s) 0.59 0.60 0.62 0.63 0.65 0.68 0.72 0.76 0.81 0.88 0.95 1.23 Outlet 55 m³/s 0.766 0.729 0.689 0.643 0.590 0.445 0.190 Inlet 40 41 0.20 0.49 W/(L/s) 0.24 0.25 0.27 0.30 0.33 0.41 0.71 Outlet 42 m³/s 0.258 Inlet 16 12 0.02 0.17 W/(L/s) 0.09 Outlet 23 DCV CONTROLS Controllers Demand Control Ventilation (DCV) EC options available, refer to pages 228-229 for DCV information and page 169 for product information; to order add DCV to product code: SSDR200-EC with DCV order SSDRDCV200-EC. Humidity PIR Pressure CO 2 Temperature Controller Elta Drive Single PH 3PH SmartStart Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: C. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. A variable speed drive is integrated within the fan. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. 158 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SINGLEFLOW SSDR Dimensional Data C E Ø D F 76 A B A B C D E F Weight kg SSDR200 509 350 205 200 75 85 14 SSDR250 584 396 205 250 75 85 17 SSDR315 635 485 295 315 85 85 26 SSDR400 700 570 295 400 75 85 36 SSDR500 880 750 385 500 91 85 54 Dimensions are in mm. Accessories Transformer Controller Flexible Connections (each) Clamps (each) Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long SSDR200-1AC 149-TC12 018-0200-FLEX 018-200-CLAMP 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 SSDR250L-1AC 149-TC12 018-0250-FLEX 018-250-CLAMP 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 SSDR250H-1AC 149-TC12 018-0250-FLEX 018-250-CLAMP 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 Electronic Controller Flexible Connections (each) Clamps (each) Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long SSDR200-1EC 149-POT-10 018-0200-FLEX 018-200-CLAMP 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 SSDR250H-1EC 149-POT-10 018-0250-FLEX 018-250-CLAMP 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 SSDR250L-1EC 149-POT-10 018-0250-FLEX 018-250-CLAMP 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 SSDR315-1EC 149-POT-10 018-0315-FLEX 018-315-CLAMP 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 SSDR400-1EC 149-POT-10 018-0400-FLEX 018-400-CLAMP 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 SSDR500-1EC 149-POT-10 018-0500-FLEX 018-500-CLAMP Please enquire SSDR500-3EC 149-POT-10 018-0500-FLEX 018-500-CLAMP Please enquire DCV Accessories Sensors Can be used with all DCV products. 149-DCV-CO2 149-DCV-DPT150 149-DCV-H1 149-DCV-HRT 149-DCV-PIR 149-DCV-TRT Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 159

SINGLEFLOW SSDR Notes 160 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

TWINFLOW STDR Direct Drive Twin Centrifugal Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 5 standard sizes from 200mm to 500mm. ü Air volume flow rates up to 0.23 m³/s (AC) / 1.65 m³/s (EC). ü Static pressures up to 500 Pa (AC) / 960 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Extensive range of stock available. ü Available in AC and EC. CASING The unit casing shall be manufactured from 1.2mm thick natural finish Aluzinc. The casing shall be designed so as to minimise vibration and shall incorporate a louvered air discharge guarded against bird ingress. Drain points shall also be provided. Each casing provides an inlet spigot to suit standard circular ducting. EPDM (Ethylene Propylene) rubber U shaped seals (being ozone and UV stable) are used to ensure a good seal back to the duct that is to be attached. Top access panels shall be provided for ease of servicing. IMPELLER High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit. MOTORS The Twin range of units may have either an EC or AC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size. Manufactured by Ziehl-Abegg providing increased reliability. All motors are suitable for use in ambient air conditions up to +60 C. QUALITY MANAGEMENT All units in the Elta range are designed and manufactured to procedures as defined in BS EN ISO 9001:2008. They are also tested in accordance with BS848 Part 2 1985 (sound performance) and ISO 5801:2007 (airside performance). TYPICAL APPLICATIONS Industrial Building Banks Hospitals Offices Hotels and Shopping Malls ACCESSORIES For full accessories & controls information please visit eltaselect.com ACO Panel : 149-ACO Electronic Controller :149-POT Transformer Controller : 149-TC Flexible Connections : 018 FLEX Clamps (each) : 018 CLAMP Silencer : 068 JF Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 161

TWINFLOW STDR Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz Speed r/min Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m STDR200-1AC 2490 STDR250L-1AC 2506 m³/s 0.125 0.115 0.107 0.099 0.091 0.076 0.061 0.045 0.026 0.004 Inlet 48 20.1 0.28 0.065 W/(L/s) 0.50 0.54 0.59 0.64 0.69 0.82 1.01 1.33 2.15 12.31 Outlet 47 m³/s 0.235 0.225 0.216 0.206 0.197 0.178 0.159 0.137 0.113 0.085 0.056 0.008 Inlet 51 25.2 0.63 0.145 W/(L/s) 0.56 0.59 0.62 0.65 0.69 0.77 0.87 1.01 1.22 1.58 2.27 12.45 Outlet 55 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: D. 162 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

TWINFLOW STDR Performance, SFP & Electrical Data EC SINGLE Phase - 200V to 277V / 50Hz or 60Hz Control Voltage Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m STDR200-1EC STDR250H-1EC STDR250L-1EC STDR315-1EC STDR400-1EC 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V 10V 8V 5V 2V m³/s 0.160 0.152 0.147 0.142 0.137 0.128 0.119 0.110 0.101 0.091 0.079 0.044 Inlet 58 29.4 1.15 0.128 W/(L/s) 0.77 0.81 0.85 0.89 0.92 0.99 1.07 1.16 1.26 1.40 1.59 2.61 Outlet 57 m³/s 0.128 0.122 0.116 0.109 0.103 0.091 0.079 0.068 0.057 0.046 0.034 0.007 Inlet 55 19.6 0.92 0.107 W/(L/s) 0.78 0.81 0.86 0.90 0.96 1.09 1.26 1.48 1.78 2.22 2.96 13.94 Outlet 55 m³/s 0.078 0.066 0.057 0.048 0.040 0.023 0.004 Inlet 45 14.7 0.31 0.038 W/(L/s) 0.40 0.48 0.56 0.67 0.81 1.44 8.59 Outlet 44 m³/s 0.021 Inlet 21 2.2 0.07 0.009 W/(L/s) 0.40 Outlet 22 m³/s 0.310 0.295 0.278 0.262 0.248 0.224 0.203 0.184 0.165 0.146 0.127 0.088 Inlet 54 30.8 2.04 0.242 W/(L/s) 0.59 0.63 0.67 0.71 0.76 0.84 0.93 1.03 1.15 1.31 1.53 2.32 Outlet 55 m³/s 0.224 0.214 0.199 0.183 0.170 0.147 0.123 0.092 0.061 0.041 0.026 Inlet 50 25.1 1.14 0.138 W/(L/s) 0.50 0.52 0.56 0.61 0.66 0.76 0.92 1.26 1.98 3.06 4.94 Outlet 50 m³/s 0.132 0.110 0.090 0.071 0.054 0.024 Inlet 39 17.3 0.37 0.043 W/(L/s) 0.28 0.33 0.41 0.52 0.70 1.64 Outlet 37 m³/s 0.035 Inlet *20 4.1 0.08 0.010 W/(L/s) 0.27 Outlet *20 m³/s 0.280 0.272 0.265 0.258 0.252 0.240 0.228 0.216 0.203 0.189 0.173 0.135 Inlet 57 34.2 1.97 0.244 W/(L/s) 0.76 0.79 0.82 0.85 0.88 0.93 0.99 1.06 1.14 1.24 1.36 1.72 Outlet 60 m³/s 0.229 0.219 0.209 0.198 0.187 0.164 0.142 0.122 0.105 0.088 0.074 0.045 Inlet 54 24.5 1.45 0.180 W/(L/s) 0.64 0.67 0.70 0.74 0.78 0.89 1.03 1.20 1.40 1.67 2.04 3.43 Outlet 55 m³/s 0.129 0.115 0.102 0.088 0.075 0.048 0.026 0.010 Inlet 42 20.3 0.43 0.053 W/(L/s) 0.33 0.38 0.43 0.50 0.59 0.95 1.86 4.96 Outlet 44 m³/s 0.041 0.012 Inlet 29 4.0 0.08 0.011 W/(L/s) 0.24 0.80 Outlet 30 m³/s 0.556 0.542 0.528 0.514 0.500 0.472 0.442 0.412 0.380 0.344 0.303 0.187 Inlet 51 38.0 1.90 0.411 W/(L/s) 0.69 0.71 0.73 0.74 0.76 0.81 0.86 0.92 0.99 1.08 1.20 1.73 Outlet 57 m³/s 0.432 0.418 0.403 0.387 0.370 0.331 0.284 0.223 0.133 Inlet 45 32.5 1.05 0.222 W/(L/s) 0.49 0.51 0.53 0.55 0.58 0.64 0.73 0.88 1.25 Outlet 50 m³/s 0.254 0.216 0.182 0.149 0.105 Inlet 35 23.3 0.33 0.064 W/(L/s) 0.25 0.29 0.33 0.40 0.52 Outlet 38 m³/s 0.064 Inlet *20 2.3 0.10 0.014 W/(L/s) 0.22 Outlet *20 m³/s 0.962 0.945 0.929 0.913 0.898 0.867 0.836 0.805 0.774 0.742 0.709 0.638 Inlet 61 43.6 4.29 0.944 W/(L/s) 0.89 0.91 0.93 0.94 0.96 1.00 1.04 1.08 1.12 1.17 1.23 1.36 Outlet 65 m³/s 0.760 0.744 0.728 0.712 0.695 0.661 0.625 0.586 0.542 0.493 0.432 0.160 Inlet 56 39.9 2.46 0.526 W/(L/s) 0.60 0.62 0.65 0.67 0.69 0.74 0.80 0.85 0.92 1.00 1.11 2.08 Outlet 59 m³/s 0.433 0.409 0.381 0.349 0.311 0.196 Inlet 41 29.7 0.62 0.132 W/(L/s) 0.28 0.30 0.33 0.37 0.42 0.61 Outlet 43 m³/s 0.111 Inlet *20 18.2 0.19 0.005 W/(L/s) 0.04 Outlet 22 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: C. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. A Variable Speed Drive is intergrated within the fan. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 163

TWINFLOW STDR Performance, SFP & Electrical Data EC SINGLE Phase - 200V to 277V / 50Hz or 60Hz Control Voltage Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m STDR500-1EC 10V 8V 5V 2V m³/s 1.302 1.271 1.240 1.208 1.175 1.107 1.035 0.959 0.877 0.788 0.691 0.456 Inlet 52 44.3 3.43 0.776 W/(L/s) 0.56 0.57 0.58 0.60 0.62 0.66 0.71 0.76 0.83 0.91 1.01 1.37 Outlet 59 m³/s 1.020 0.982 0.942 0.902 0.860 0.771 0.672 0.561 0.427 0.240 Inlet 47 40.3 1.89 0.429 W/(L/s) 0.39 0.41 0.43 0.45 0.47 0.52 0.60 0.70 0.85 1.26 Outlet 53 m³/s 0.600 0.518 0.441 0.358 0.256 Inlet 35 31.4 0.58 0.115 W/(L/s) 0.19 0.22 0.25 0.29 0.37 Outlet 39 m³/s 0.133 Inlet *20 13.8 0.18 0.005 W/(L/s) 0.03 Outlet *20 Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: C. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. A Variable Speed Drive is intergrated within the fan. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. 164 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

TWINFLOW STDR Performance, SFP & Electrical Data EC THREE Phase - 380V to 480V / 50Hz or 60Hz Control Voltage Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data Peak Amps Input kw dba @ 3m STDR500-3EC 10V 8V 5V 2V m³/s 1.655 1.620 1.590 1.561 1.534 1.482 1.432 1.381 1.328 1.274 1.217 1.093 Inlet 60 44.9 2.43 1.588 W/(L/s) 0.86 0.89 0.91 0.94 0.96 1.01 1.06 1.10 1.15 1.20 1.26 1.38 Outlet 68 m³/s 1.287 1.251 1.216 1.180 1.144 1.072 0.998 0.922 0.844 0.763 0.676 0.480 Inlet 54 41.6 1.41 0.859 W/(L/s) 0.66 0.68 0.69 0.71 0.72 0.76 0.81 0.86 0.91 0.98 1.07 1.36 Outlet 60 m³/s 0.770 0.698 0.630 0.563 0.497 0.355 0.169 Inlet 41 35.4 0.49 0.209 W/(L/s) 0.28 0.29 0.31 0.34 0.37 0.48 0.83 Outlet 46 m³/s 0.189 Inlet *20 7.0 0.16 0.024 W/(L/s) 0.13 Outlet 22 DCV CONTROLS Demand Control Ventilation (DCV) EC options available, refer to pages 228-229 for DCV information and page 169 for product information; to order add DCV to product code: SSDR200-EC with DCV order SSDRDCV200-EC. Data in accordance with ErP 1253/2014 of the European Parliament. category is NRVU. Measurement category used to determine energy efficiency: C. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. A Variable Speed Drive is intergrated within the fan. *At 2V the average spherical free-field sound pressure levels cannot be accurately measured above the background level in our conventional laboratory facilities. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 165

TWINFLOW STDR Dimensional Data C 76 E A Ø D B F A B C D E F Weight kg STDR200 550 565 296 200 56 85 30 STDR250L 602 652 387 250 55 85 40 STDR250H 602 652 387 250 55 85 41 STDR315 750 864 478 315 73 85 65 STDR400 846 1019 478 400 48 85 85 STDR500 988 1254 606 500 50 85 118 Dimensions are in mm. 166 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

TWINFLOW STDR Accessories ACO Panel Transformer Controller Flexible Connections (each) Clamps (each) Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram STDR200-1AC 149-ACO18 149-TC12 018-0200-FLEX 018-200-CLAMP 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-2177 STDR250L-1AC 149-ACO18 149-TC12 018-0250-FLEX 018-250-CLAMP 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-2177 Electronic Controller ACO Panel Flexible Connections (each) Clamps (each) Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram STDR200-1EC 149-POT-10 149-ACO14E 018-0200-FLEX 018-200-CLAMP 068-0200-JF1 068-0200-JF2 068-0200-JF3 068-0200-JF4 152-000236 STDR250H-1EC 149-POT-10 149-ACO14E 018-0250-FLEX 018-250-CLAMP 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-000236 STDR250L-1EC 149-POT-10 149-ACO14E 018-0250-FLEX 018-250-CLAMP 068-0250-JF1 068-0250-JF2 068-0250-JF3 068-0250-JF4 152-000236 STDR315-1EC 149-POT-10 149-ACO14E 018-0315-FLEX 018-315-CLAMP 068-0315-JF1 068-0315-JF2 068-0315-JF3 068-0315-JF4 152-000244 STDR400-1EC 149-POT-10 149-ACO1/B 018-0400-FLEX 018-400-CLAMP 068-0400-JF1 068-0400-JF2 068-0400-JF3 068-0400-JF4 152-000244 STDR500-1EC 149-POT-10 149-ACO1/B 018-0500-FLEX 018-500-CLAMP Please enquire. 152-000244 Electronic Controller ACO Panel Flexible Connections (each) Clamps (each) Silencer 300mm Long Silencer 600mm Long Silencer 900mm Long Silencer 1200mm Long Wiring Diagram STDR500-3EC 149-POT-10 149-ACO3/B 018-0500-FLEX 018-500-CLAMP Please enquire. 152-2MOEA03K3 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 167

TWINFLOW STDR Notes 168 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SINGLEFLOW SSDR DCV Roof Mounted Direct Drive Centrifugal Fan Refer to Singleflow SSDR on pages 155-150 for Performance & Electrical Data. For DCV information refer to pages 228-229. QUICK FACTS OVERVIEW The Singleflow SSDR DCV...EC incorporates the BAT (Best Available Technology) Vpro backward curved impeller, with three dimensional profiled blades powered by the ultra reliable Ziehl-Abegg EC (electronically commutated) external rotor motor.the range of single roof fans are suitable for external mounting, manufactured in Aluzinc with a natural finish. ü 5 standard sizes from 200mm to 500mm (7 models). ü Air volume flow rates up to 3.84 m³/s (EC). ü Static pressures up to 1300 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Available in EC. TWINFLOW STDR DCV Roof Mounted Direct Drive Twin Centrifugal Fan OVERVIEW The Twinflow STDR DCV...EC incorporates the BAT (Best Available Technology) Vpro backward curved impeller, with three dimensional profiled blades powered by the ultra reliable Ziehl-Abegg EC (electronically commutated) external rotor motor. The range of twin roof fans are suitable for external mounting, manufactured in Aluzinc with a natural finish. Refer to Twinflow STDR on pages 161-168 for Performance & Electrical Data. For DCV information refer to pages 228-229. QUICK FACTS ü 5 standard sizes from 200mm to 500mm. ü Air volume flow rates up to 1.65 m³/s (EC). ü Static pressures up to 960 Pa (EC). ü Suitable for operating temperatures up to +60 C. ü Extensive range of stock available. ü Available in EC. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 169

MINIFLOW SMF Horizontal Roof Cowl For full detailed information on Accessories please visit eltaselect.com. QUICK FACTS ü UV Stabilised ü Maintenance Free ü Up to 30 roof pitch ügoose Wing Grey (BS 00-A-05) CASING The top cowl and fan support housing shall be manufactured from UVstabilised plastic, finished in goose wing grey (BS 00-A-05). QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. TYPICAL APPLICATIONS Changing Rooms Toilets Bathrooms Shower Rooms 170 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MINIFLOW SMF Cowl Pressure Drop Curve 30 1 2 SMF13 SMF20/30 25 20 Pressure Drop, Pa 15 10 2 5 1 0 0 0.1 0.2 0.3 0.4 0.5 0.6 Vol m /s Determine pressure loss against required flow rate and add pressure loss value to system design pressure, verify that fan selection can accommodate extra pressure loss. Original design: flow rate (m³/s) and pressure (Pa), with cowl becomes flow rate (m³/s) and (pressure (Pa) + pressure loss (Pa) from curve). Dimensional Data A D C E F B A B C D E F Weight kg SMF13 310 276 200 30 200 250 1.9 SMF20/30 570 430 350 60 350 410 4.6 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 171

MINIFLOW SMF Notes 172 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SKYFLOW SSR Horizontal Roof Cowl For full detailed information on Accessories please visit eltaselect.com. QUICK FACTS ü UV Stabilised ü Maintenance Free ü Up to 30 roof pitch ü Goose Wing Grey (BS 00-A-05) CASING The top cowl and fan support housing shall be manufactured from UV stabilised GRP finished in goose wing grey (BS 00-A-05). QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. TYPICAL APPLICATIONS Libraries Hospitals Offices Banks Small Industrial Units Retail Parks ACCESSORIES For full accessories & controls information please visit eltaselect.com SSR (c/w Bird Guard) SSR (c/w Bird Guard & Shutters) Silencer : 068 SFDS Back Draught Shutter : 039 SFSV Purlin Box : 039B PB Soaker Sheet : 039 SP Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 173

SKYFLOW SSR Cool Pressure Drop Curve 140 120 100 1 2 3 4 5 6 SSR25 SSR31/35 SSR40/45 SSR50/56 SSR63/71 SSR80 Pressure Drop, Pa 80 60 1 3 4 5 40 20 2 6 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Vol m /s Determine pressure loss against required flow rate and add pressure loss value to system design pressure, verify that fan selection can accommodate extra pressure loss. Original design: flow rate (m³/s) and pressure (Pa), with cowl becomes flow rate (m³/s) and (pressure (Pa) + pressure loss (Pa) from curve). 174 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SKYFLOW SSR Dimensional Data 1 Purlin Mounted PURLIN MOUNTING UNIT PURLIN MOUNTING UNIT 1 A A Curb Mounted CURB MOUNTING UNIT CURB MOUNTING UNIT C C D F HEIGHT PURLIN BOX D F HEIGHT PURLIN BOX E B INSIDE SECTION A-A J TYP CRS K CRS E N N B INSIDE L L STANDARD PURLIN BOX STANDARD PURLIN BOX SECTION A-A IS SUITABLE FOR ROOM IS SUITABLE FOR ROOM SECTION B-B SECTION B-B THICKNESS OF 50-75mmTHICKNESS OF 50-75mm SECURE UNIT TO HARDWOOD SECURE UNIT TO HARDWOOD SILL WITH M10 COACH BOLTS SILL WITH M10 COACH BOLTS (NOT SUPPLIED BY ELTA FANS) (NOT SUPPLIED BY ELTA FANS) J TYP CRS PURLIN BOX SECURED TOPURLIN BOX SECURED TO TRIMMERS WITH M10 TRIMMERS WITH M10 K CRS LINDAPTERS (NOT SUPPLIED LINDAPTERS (NOT SUPPLIED BY ELTA FANS) BY ELTA FANS) M K CRS M K CRS PRODUCT CODE A B C D E SSR250 500 475 318 428 SSR315 80 710 684 378 610 SSR350 SSR400 800 784 478 85 730 SSR450 SSR500 960 934 575 100 860 SSR560 SSR630 1230 1054 660 106 1000 SSR710 A A A G BETWEEN TRIMMERS A G BETWEEN TRIMMERS B B B B H TYP CRS H TYP CRS 50 50 NOTE: SIZE 250 PURLIN BOXES ARE PARALLEL SIDED A B C D E F G H J K L M N Weight kg SSR25 500 475 318 80 428 240 428 175 542 380 340 440 50 4 SSR31/35 710 684 378 80 610 240 636 250 750 500 460 610 75 8 SSR40/45 800 784 478 85 730 250 756 300 870 600 550 700 75 9 SSR50/56 960 934 575 100 860 250 886 350 1000 745 700 850 75 15 SSR63/71 1230 1054 660 106 1000 250 1026 435 1140 870 830 980 75 23 SSR80 1400 1174 670 100 1076 270 1076 470 1190-950 1100 75 33 Dimensions are in mm. Accessories (c/w Bird Guard) (c/w Bird Guard & Shutters) Backdraught Shutter Purlin Box Soaker Sheet Drop in Silencer 600mm Long Drop in Silencer 900mm Long Drop in Silencer 1200mm Long SSR25 SSR25B SSR25BS 039-SFSV-25 039B-PB25 039-SP25 068-SFDS-0600-E 068-SFDS-0900-E 068-SFDS-1200-E SSR31/35 SSR31/35B SSR31/35BS 039-SFSV-31/35 039B-PB31/35 039-SP31/35 068-SFDS-0600-A 068-SFDS-0900-A 068-SFDS-1200-A SSR40/45 SSR40/45B SSR40/45BS 039-SFSV-40/45 039B-PB40/45 039-SP40/45 068-SFDS-0600-B 068-SFDS-0900-B 068-SFDS-1200-B SSR50/56 SSR50/56B SSR50/56BS 039-SFSV-50/56 039B-PB50/56 039-SP50/56 068-SFDS-0600-C 068-SFDS-0900-C 068-SFDS-1200-C SSR63/71 SSR63/71B SSR63/71BS 039-SFSV-63/71 039B-PB63/71 039-SP63/71 068-SFDS-0600-D 068-SFDS-0900-D 068-SFDS-1200-D SSR80 SSR80B SSR80BS 039-SFSV-80 039B-PB80 039-SP80 068-SFDS-0600-F 068-SFDS-0900-F 068-SFDS-1200-F Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 175

SKYFLOW SSR Notes 176 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SKYFLOW SSFV Vertical Roof Cowl For full detailed information on Accessories please visit eltaselect.com. QUICK FACTS ü UV Stabilised ü Maintenance Free ü Up to 30 roof pitch ü Goose Wing Grey (BS 00-A-05) ü Complete with Shutter CASING The top cowl and fan support housing shall be manufactured from UV stabilised GRP finished in goose wing grey (BS 00-A-05). QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. TYPICAL APPLICATIONS Industrial Units Hospitals Workshops ACCESSORIES For full accessories & controls information please visit eltaselect.com Purlin Box : 039B PB Soaker Sheet : 039 SP Silencer : 068 SFDS Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 177

SKYFLOW SSFV Cowl Pressure Drop Curve 180 160 140 1 2 3 4 SSFV31/35 SSFV40/45 SSFV50/56 SSFV63/71 120 100 80 4 60 2 3 40 20 1 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Vol m /s Determine pressure loss against required flow rate and add pressure loss value to system design pressure, verify that fan selection can accommodate extra pressure loss. Original design: flow rate (m³/s) and pressure (Pa), with cowl becomes flow rate (m³/s) and (pressure (Pa) + pressure loss (Pa) from curve). 178 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SKYFLOW SSFV Dimensional Data Purlin Mounted Curb Mounted Ø A Ø A C C D F HEIGHT PURLIN BOX D F HEIGHT PURLIN BOX E B INSIDE SECTION A-A E B INSIDE STANDARD PURLIN BOX SECTION IS A-A SUITABLE FOR ROOM THICKNESS OF 50-75mm STANDARD PURLIN BOX IS SUITABLE FOR ROOM THICKNESS OF 50-75mm N L SECTION B-B J TYP CRS K CRS PURLIN BOX SECURED TO PURLIN BOX SECURED TO J TYP CRSTRIMMERS WITH M10 TRIMMERS WITH M10 K LINDAPTERS CRS (NOT SUPPLIEDLINDAPTERS (NOT SUPPLIED BY ELTA FANS) BY ELTA FANS) SECURE UNIT TO HARDWOOD SILL WITH M10 COACH BOLTS (NOT SUPPLIED BY ELTA FANS) M K CRS A H TYP CRS A H TYP CRS A 50 G BETWEEN TRIMMERS A 50 G BETWEEN TRIMMERS B B PRODUCT CODE A B C D E F SSRV315/4-1AC SSRV350/4-1AC SSRV400/4/6-3AC SSRV400/4-1AC SSRV450/4/6-3AC SSRV450/4-1AC SSRV450/6-1AC SSRV500/4/6-3AC SSRV500/4-1AC SSRV500/6-1AC SSRV560/4-1AC SSRV560/4/6-3AC SSRV560/6-1AC SSRV630/4/6-3AC SSRV630/6/8-3AC SSRV630/6-1AC SSRV710/4/6-3AC SSRV710/6/8-3AC 650 684 445 80 610 240 768 784 503 85 730 250 982 934 645 100 860 250 1156 1054 764 106 1000 250 1 A B C D E F G H J K L M N Weight kg SSFV31/35 650 684 445 80 610 240 636 250 750 500 460 610 75 8 SSFV40/45 768 784 503 85 730 250 756 300 870 600 550 700 75 9 SSFV50/56 982 934 645 100 860 250 886 350 1000 745 700 850 75 15 SSFV63/71 1156 1054 764 106 1000 250 1026 435 1140 870 830 980 75 20 Dimensions are in mm. Accessories Purlin Box Soaker Sheet Drop in Silencer 600mm Long Drop in Silencer 900mm Long Drop in Silencer 1200mm Long SSFV-31/35 039B-PB31/35 039-SP31/35 068-SFDS-0600-A 068-SFDS-0900-A 068-SFDS-1200-A SSFV-40/45 039B-PB40/45 039-SP40/45 068-SFDS-0600-B 068-SFDS-0900-B 068-SFDS-1200-B SSFV-50/56 039-SP50/56 039-SP50/56 068-SFDS-0600-C 068-SFDS-0900-C 068-SFDS-1200-C SSFV-63/71 039B-PB63/71 039-SP63/71 068-SFDS-0600-D 068-SFDS-0900-D 068-SFDS-1200-D Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 179

SKYFLOW SSFV Notes 180 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

High Temperature Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 181

182 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

BIFLOW SB (CYL) Bifurcated Cylindrical Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 3 standard sizes from 400mm to 630mm. ü Air volume flow rates up to 4.50 m³/s. ü Static pressures up to 200 Pa. ü Suitable for operating temperatures up to +200 C. ü Available in AC. CASING IMPELLER QUALITY MANAGEMENT High Temperature The all metal fan casing provides a long lasting and robust construction. The units have been constructed from sheet steel with both motor and impeller mounted within the length of the unit casing. The motor is located out of the airstream in a single entry tunnel into the casing making the unit suitable for temperatures up to +200 C. All casing parts are heavy gauge mild steel sheet, roll formed and welded, then hot dip galvanised to BS EN ISO 1461:1999 after fabrication. Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium (LM6), natural finish. Impellers are factory set at an angle to provide maximum performance. The hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are to be dynamically balanced to ISO 14694 Grade G6.3. MOTORS Motors are to be foot mounted totally enclosed metric type to IP55, with sealed for life bearings, standard industrial paint finish and Class H insulation to EN 60034-5. Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SB (CYL) units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Kitchen Extract Spray Booths Hot Gas Situations Corrosive Atmospheres Boiler Houses Heavy Industrial ACCESSORIES For full accessories & controls information please visit eltaselect.com Ancillary Pack : APK Mounting Feet : 060B Matching Flanges : 061B Flexible Connections : 063 PU AV Mounts (Set of 4) : 062 00 Damper : 019 Bell Mouth Inlet : 241B Silencer : 068 DE*P(C) Impeller Side Guard : 078C Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 183

BIFLOW SB (CYL) Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min Airflow Airflow m³/s @ Static Pressure Pa. 0 25 50 75 100 150 200 Motor Electrical Data Peak Amps SC Amps Output kw dba @ 3m SB400-CYL4-3 1400 m³/s 1.010 0.961 0.900 0.821 0.699 0.69 3.80 0.25 55 SB500-CYL4-3 1415 m³/s 2.300 2.230 2.140 2.040 1.920 1.520 1.65 10.9 0.75 62 SB630-CYL4-3 1410 m³/s 4.501 4.393 4.280 4.162 4.039 3.771 3.442 4.43 30.9 2.20 70 Dimensional Data E-HOLES F EQUISPACED ON G PCD AIRFLOW A B C A B C E F G Weight kg SB400-CYL4-3 400 475 450 8 12 450 29 SB500-CYL4-3 500 585 450 12 12 560 47 SB630-CYL4-3 630 715 570 12 12 690 78 Dimensions are in mm. Exempt from ErP of the European Parliament. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Data provided at standard air density of 1.2 kg/m³. Peak Amps @ 400V / 3Ph / 50Hz. 184 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

BIFLOW SB (CYL) Accessories Impeller Side Guard Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) Damper SB400-CYL4-3 078C-0400-C APK400SBCYL/002 060B-0400 061B-0400 063-0400-PU250 062-002 019-0400-STD SB500-CYL4-3 078C-0500-C APK500SBCYL/003 060B-0500 061B-0500 063-0500-PU250 062-003 019-0500-STD SB630-CYL4-3 078C-0630-C APK630SBCYL/003 060B-0630 061B-0630 063-0630-PU250 062-003 019-0630-STD Bell Mouth Inlet Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded SB400-CYL4-3 241B-0400-BELL 068-0400-1DEP 068-0400-1DENP 068-0400-2DEP 068-0400-2DENP SB500-CYL4-3 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP SB630-CYL4-3 241B-0630-BELL 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP 068-0630-2DENP * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 185

BIFLOW SB (CYL) Notes 186 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

BIFLOW SB (CON) Bifurcated Conical Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 4 standard sizes from 250mm to 500mm. ü Air volume flow rates up to 3.80 m³/s. ü Static pressures up to 600 Pa. ü Suitable for operating temperatures up to +200 C. ü Available in AC. CASING The all metal fan casing provides a long lasting and robust construction. The units have been constructed from sheet steel with both motor and impeller mounted within the length of the unit casing. The motor is located out of the airstream in a tunnel which traverses the casing making the unit suitable for temperatures up to +200 C. All casing parts are heavy gauge mild steel sheet, roll formed and welded, then hot dip galvanised to BS EN ISO 1461:1999 after fabrication. IMPELLER Adjustable pitch aerofoil impellers are provided with blades made from high quality pressure die cast aluminium (LM6), natural finish. Impellers are factory set at an angle to provide maximum performance. The hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are to be dynamically balanced to ISO 14694 Grade G6.3. MOTORS Motors are to be foot mounted totally enclosed metric type to IP55, with sealed for life bearings, standard industrial paint finish and Class H insulation to EN 60034-5. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SB (CON) units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Kitchen Extract Spray Booths Hot Gas Situations Corrosive Atmospheres Boiler Houses Heavy Industrial ACCESSORIES For full accessories & controls information please visit eltaselect.com Ancillary Pack : APK Mounting Feet : 060B Matching Flanges : 061B Flexible Connections : 063 PU AV Mounts (Set of 4) : 062 00 Damper : 019 Bell Mouth Inlet : 241B Silencer : 068 DE*P(C) Impeller Side Guard : 078C Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 187

BIFLOW SB (CON) Performance, SFP & Electrical Data SINGLE Phase - 220 to 240V / 50Hz Speed r/min Airflow SFP Airflow m³/s @ Static Pressure Pa 0 25 50 75 100 150 200 250 Motor Electrical Data Peak Amps Input kw dba @ 3m SB250-CON4-1 1450 m³/s 0.280 0.223 0.150 0.029 - - - - 1.13 0.120 Inlet 48 SB315-CON4-1 1370 m³/s 0.521 0.483 0.439 0.383 0.257 - - - 1.13 0.120 Inlet 51 THREE Phase - 380 to 415V / 50Hz Speed r/min Airflow SFP Airflow m³/s @ Static Pressure Pa 0 25 50 75 100 150 200 250 300 350 400 500 Motor Electrical Data Peak Amps Input kw dba @ 3m SB250-CON2-3 2780 m³/s 0.566 0.535 0.502 0.468 0.434 0.360 0.282 0.198 - - - - 0.68 0.250 Inlet 61 SB250-CON4-3 1370 m³/s 0.270 0.211 0.140 0.040 - - - - - - - - 0.48 0.120 Inlet 48 SB315-CON2-3 2780 m³/s 0.931 0.919 0.906 0.892 0.878 0.846 0.810 0.768 0.716 0.648 0.554-1.18 0.550 Inlet 64 SB315-CON4-3 1370 m³/s 0.521 0.483 0.439 0.383 0.257 - - - - - - - 0.48 0.120 Inlet 51 SB400-CON2-3 2800 m³/s 2.082 2.065 2.047 2.029 2.010 1.969 1.926 1.878 1.825 1.766 1.698 1.527 4.42 2.200 Inlet 70 SB500-CON2-3 2840 m³/s 3.803 3.780 3.756 3.732 3.707 3.655 3.600 3.541 3.477 3.408 3.332 3.152 7.49 4.000 Inlet 80 Dimensional Data E-HOLES F EQUISPACED ON G PCD AIRFLOW A D B H OPTIONAL MOUNTING FEET c A B C D E F G H Weight kg SB250 250 325 460 220 8 10 299 400 23 23 SB315 315 380 500 250 8 10 355 460 30 30 SB315-CON2-3 315 380 500 250 8 10 355 460-31 SB400 400 485 650 305 8 12 450 570-49 SB500 500 585 710 370 12 12 560 700-86 Dimensions are in mm. 1Ph 3Ph Exempt from ErP of the European Parliament. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Data provided at standard air density of 1.2 kg/m³. 188 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

BIFLOW SB (CON) Accessories Impeller Side Guard Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) Damper SB250-CON4-1 078C-0250-C APK250SBCON/002 060B-0250-B 061B-0250-B 063-0250-PU250 062-002 019-0250-STD SB315-CON4-1 078C-0315-C APK315SBCON/003 060B-0315-B 061B-0315 063-0315-PU250 062-003 019-0315-STD Bell Mouth Inlet Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded SB250-CON4-1 241B-0250 068-0250-1DEP 068-0250-1DENP 068-0250-2DEP 068-0250-2DENP SB315-CON4-1 241B-0315 068-0315-1DEP 068-0315-1DENP 068-0315-2DEP 068-0315-2DENP Impeller Side Guard Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) Damper SB250-CON2-3 078C-0250-C APK250SBCON/002 060B-0250-B 061B-0250-B 063-0250-PU250 062-002 019-0250-STD SB250-CON4-3 078C-0250-C APK250SBCON/002 060B-0250-B 061B-0250-B 063-0250-PU250 062-002 019-0250-STD SB315-CON2-3 078C-0315-C APK315SBCON/003 060B-0315-B 061B-0315 063-0315-PU250 062-003 019-0315-STD SB315-CON4-3 078C-0315-C APK315SBCON/003 060B-0315-B 061B-0315 063-0315-PU250 062-003 019-0315-STD SB400-CON2-3 078C-0400-C APK400SBCON/003 060B-0400-B 061B-0400 063-0400-PU250 062-003 019-0400-STD SB500-CON2-3 078C-0500-C APK500SBCON/004 060B-0500-B 061B-0500 063-0500-PU250 062-004 019-0500-STD Bell Mouth Inlet Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded SB250-CON2-3 241B-0250 068-0250-1DEP 068-0250-1DENP 068-0250-2DEP SB250-CON4-3 241B-0250 068-0250-1DEP 068-0250-1DENP 068-0250-2DEP SB315-CON2-3 241B-0315 068-0315-1DEP 068-0315-1DENP 068-0315-2DEP SB315-CON4-3 241B-0315 068-0315-1DEP 068-0315-1DENP 068-0315-2DEP SB400-CON2-3 241B-0400-BELL 068-0400-1DEP 068-0400-1DENP 068-0400-2DEP SB500-CON2-3 241B-0500-BELL 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 189

BIFLOW SB (CON) Notes 190 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUBE SQU-HT(S) Centrifugal Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 6 physical sizes with 8 models from 315mm to 710mm. ü Air volume flow rates up to 3.9 m³/s. ü Static pressures up to 1120 Pa. ü Suitable for operating temperatures up to +120 C ( In-duct). ü Inverter speed controllable via 1Ph and 3Ph supply. ü Interchangeable double skinned panels. ü Available in AC. CASING Constructed from self supporting corrosion-resistant extruded Aluminium section, assembled with aluminium corners and 25mm thick double skinned removable panels, manufactured from pre-galvanised steel, in-filled with a non flammable mineral wool, 60kg/m³, thereby minimising breakout noise. IMPELLER A high efficiency backward curved welded steel impeller with a nonoverloading power characteristic, suitable for continuous S1 operation up to +120 C, finished with a powder coating to RAL 5002 for greater surface protection, and dynamically balanced to G2.5 / G6.3 according to ISO1940 part 1. MOTORS Three phase multi-voltage IP55 TEFC Foot / Flange mounted IEC frame motors, wound for either (Delta) 230V/3Ph/50Hz or (Star) at 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls. Electrical connection is made directly to the IP55 motor terminal box. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SQU-HT units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Kitchens Restaurants Schools Colleges Shops Shower Rooms Factories ACCESSORIES For full accessories & controls information please visit eltaselect.com Inverter : 149-ODE Matching Flanges : 061B Flexible Connections : 063 PU Silencer : 068 DE*P(C) Weather Hood : 064 WHV Transition Piece : 260 TP Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 191

QUBE SQU-HT(S) Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SQU1/4-3HT(s) 1441 SQU2/4-3HT(s) 1445 SQU22/4-3HT(s) 1470 SQU3/4-3HT(s) 1471 SQU23/4-3HT(s) 1445 SQU24/4-3HT(s) 1435 SQU4/4-3HT(s) 1447 SQU4/6-3HT (s) 910 Airflow SFP Airflow m³/s @ Static Pressure Pa. Overall Efficiency Motor 0 100 200 300 400 500 600 800 1000 1200 % kw Peak m³/s 0.582 0.478 0.354 0.162 Amps Electrical Data FLC* Amps FLC# Amps 33.4 0.25 0.805 2.3 1.02 dba @ 3m Inlet 51 Outlet 53 W/(L/s) 0.32 0.46 0.76 1.32 Breakout 38 m³/s 1.367 1.241 1.115 0.968 0.764 54.2 0.55 1.42 5.3 2.05 Inlet 57 Outlet 59 W/(L/s) 0.31 0.45 0.63 0.87 1.14 Breakout 44 m³/s 1.785 1.676 1.552 1.409 1.245 1.051 0.800 53.8 1.05 2.23 8.5 3.17 Inlet 60 Outlet 62 W/(L/s) 0.50 0.58 0.67 0.76 0.88 1.01 1.21 Breakout 47 m³/s 1.993 1.866 1.729 1.576 1.393 1.147 0.691 60.1 1.1 2.4 8.5 3.17 Inlet 60 Outlet 62 W/(L/s) 0.38 0.48 0.59 0.74 0.91 1.11 1.44 Breakout 47 m³/s 3.370 3.187 3.013 2.831 2.634 2.423 2.201 1.725 54.1 2.734 5.48-6.2 Inlet 66 Outlet 68 W/(L/s) 0.87 0.91 0.97 1.03 1.11 1.20 1.30 1.57 Breakout 53 m³/s 3.635 3.493 3.348 3.195 3.027 2.833 2.600 1.951 1.126 58.6 2.894 5.50 7.6 2.8 Inlet 66 Outlet 68 W/(L/s) 0.54 0.63 0.72 0.81 0.90 1.00 1.11 1.44 2.05 Breakout 53 m³/s 3.889 3.720 3.550 3.373 3.185 2.980 2.745 2.086 64.8 3 6.5-6.2 Inlet 66 Outlet 68 W/(L/s) 0.49 0.59 0.71 0.83 0.99 1.17 1.37 1.79 Breakout 48 m³/s 3.019 2.866 2.673 2.415 2.037 1.372 66.9 1.5 3.9 7.6 2.8 Inlet 59 Outlet 61 W/(L/s) 0.39 0.46 0.55 0.69 0.86 1.04 Breakout 46 The unit is supplied as either an end inlet vertical discharge unit (SQU-HT) or as a side inlet vertical discharge unit (SQU-HTS). Exempt from ErP of the European Parliament. FLC* Amps at 230V / 1Ph / 50Hz input before a 1Ph to 3Ph Variable Speed Drive. FLC# Amps at 400V / 3Ph / 50Hz input before a 3Ph to 3Ph Variable Speed Drive. A variable speed drive (Eltadrive) must be installed with this fan. Data shown is for end inlet configuration. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. 192 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUBE SQU-HT(S) Dimensional Data OUTLET D A OUTLET B 50mm TYP A C Spigot END INLET OPTION A SIDE INLET OPTION SIDE INLET OPTION End Inlet Spigot Ø A B C D Side Inlet W x H Outlet W x H Weight kg SQU1/4HT 315 500 197 280 63 203 x 440 219 x 440 43 SQU2/4HT 500 670 213 350 80 320 x 610 273 x 610 70 SQU22/4HT 400 670 257 350 80 320 x 610 273 x 610 89 SQU3/4HT 560 820 257 350 80 420 x 740 303 x 740 114 SQU23/4HT 500 820 293 474 80 420 x 740 303 x 740 144 SQU24/4HT 630 1020 293 474 99 571 x 940 352 x 940 173 SQU4/4HT 710 1020 293 474 99 571 x 940 352 x 940 172 SQU4/6HT 710 1020 293 474 99 571 x 940 352 x 940 190 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 193

QUBE SQU-HT(S) Accessories Inverter Controller 1PH-3PH IP66 Inverter Controller 1PH-3PH IP20 Inverter Controller 3PH-3PH IP66 Inverter Controller 3PH-3PH IP20 Matching Flanges (each) Flexible Connections (each) SQU1/4-3HT* 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 061B-0315 063-0315-PU250 SQU2/4-3HT* 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 061B-0500 063-0500-PU250 SQU22/4-3HT* 149-ODE-2-12151-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 061B-0400 063-0400-PU250 SQU3/4-3HT* 149-ODE-2-12151-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 061B-0560 063-0560-PU250 SQU23/4-3HT* - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 061B-0500 063-0500-PU250 SQU24/4-3HT* - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 061B-0630 063-0630-PU250 SQU4/4-3HT* - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 061B-0710 063-0710-PU250 SQU4/6-3HT* 149-ODE-2-22220-1KB4Y 149-ODE-2-22220-1KB42 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 061B-0710 063-0710-PU250 Inlet Transition piece Outlet Transistion Piece Weather Hood Silencer 1D Unpodded Silencer 2D Unpodded Wiring Diagram SQU1/4-3HT* 260-SQU-TPI-A 260-SQU-TPO-A 064-SQU-WHV-A 068-0315-1DENP 068-0315-2DENP 152-600 SQU2/4-3HT* 260-SQU-TPI-B 260-SQU-TPO-B 064-SQU-WHV-B 068-0500-1DENP 068-0500-2DENP 152-600 SQU22/4-3HT* 260-SQU-TPI-C 260-SQU-TPO-C 064-SQU-WHV-B 068-0400-1DENP 068-0400-2DENP 152-600 SQU3/4-3HT* 260-SQU-TPI-D 260-SQU-TPO-D 064-SQU-WHV-C 068-0560-1DENP 068-0560-2DENP 152-600 SQU23/4-3HT* 260-SQU-TPI-E 260-SQU-TPO-E 064-SQU-WHV-C 068-0500-1DENP 068-0500-2DENP 152-600 SQU24/4-3HT* 260-SQU-TPI-F 260-SQU-TPO-F 064-SQU-WHV-D 068-0630-1DENP 068-0630-2DENP 152-600 SQU4/4-3HT* 260-SQU-TPI-G 260-SQU-TPO-G 064-SQU-WHV-D 068-0710-1DENP 068-0710-2DENP 152-600 SQU4/6-3HT* 260-SQU-TPI-G 260-SQU-TPO-G 064-SQU-WHV-D 068-0710-1DENP 068-0710-2DENP 152-600 * Add S to code for side entry. HTS model only. For horizontal discharge only. Fan & inverter packages available. Please contact Elta Fans for more information. 194 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

QUBE SQU-HT(S) Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 195

SLIM QUBE SSQU-HT Centrifugal Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 4 standard sizes, 9 models. ü Air volume flow rates up to 5.216 m³/s. ü Static pressures up to 1390 Pa. ü Suitable for operating temperatures up to +120 C (In duct). ü Inverter speed controllable via 1Ph and 3Ph supply. ü Available in AC. CASING Constructed from self supporting corrosion-resistant extruded Aluminium section, assembled with aluminium corners and 25mm thick double skinned removable panels, manufactured from pre-galvanised steel, in-filled with a non flammable mineral wool, 60kg/m³, thereby minimising breakout noise. IMPELLER A high efficiency backward curved welded steel impeller with a nonoverloading power characteristic, finished with a powder coating to RAL 5002 for greater surface protection, and dynamically balanced to G2.5 / G6.3 according to ISO1940 part 1. MOTORS Three phase multi-voltage IP55 TEFC Foot / Flange mounted IEC frame motors, wound for either (Delta) 230V/3Ph/50Hz or (Star) at 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001: 2008. All QUBe units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Kitchens Restaurants Schools Colleges Shops Shower Rooms Factories ACCESSORIES For full accessories & controls information please visit eltaselect.com Inverter : 149-ODE Flexible Connections : 063 PU Silencer : 068 DE*P(C) Weather Hood : 064 WHC Weather Hood : 064 WHV Transition Piece : 260 TP External Roof : 039 ER 196 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SLIM QUBE SSQU-HT Performance, SFP & Electrical Data THREE Phase - 380V to 415V / 50Hz Speed r/min SSQU1/4-3HT 1431 SSQU2/4-3HT 1435 SSQU22/4-3HT 1470 SSQU3/4-3HT 1463 SSQU23/4-3HT 1440 SSQU4/4-3HT 1437 SSQU24/4-3BHT 1475 SSQU4/4-3BHT 1441 SSQU4/6-3HT 950 Airflow SFP Airflow m³/s @ Static Pressure Pa. Overall 0 100 200 300 400 500 750 1000 1250 Efficiency % kw Motor Peak Amps Electrical Data FLC* Amps FLC# Amps dba @ 3m m³/s 0.536 0.490 0.391 0.190 Inlet 46 35.3 0.25 0.805 2.3 1.02 W/(L/s) 0.48 0.54 0.69 1.24 Outlet 45 m³/s 1.326 1.235 1.130 1.001 0.828 0.496 Inlet 51 56.2 0.55 1.42 5.3 2.05 W/(L/s) 0.39 0.46 0.55 0.66 0.80 1.18 Outlet 52 m³/s 1.764 1.657 1.536 1.394 1.222 0.998 Inlet 60 54.3 1.1 2.3 8.5 3.17 W/(L/s) 0.56 0.62 0.69 0.78 0.88 1.03 Outlet 62 m³/s 1.955 1.854 1.744 1.621 1.477 1.292 Inlet 56 64.9 1.1 2.4 8.5 3.17 W/(L/s) 0.41 0.48 0.56 0.64 0.74 0.86 Outlet 56 m³/s 3.280 3.156 3.022 2.876 2.717 2.540 1.973 0.941 Inlet 66 56.4 3.0 5.5-6.2 W/(L/s) 0.83 0.89 0.95 1.01 1.09 1.17 1.46 2.33 Outlet 68 m³/s 3.802 3.689 3.564 3.425 3.269 3.092 2.518 1.339 Inlet 65 67.2 3.0 6.5-6.2 W/(L/s) 0.57 0.63 0.70 0.78 0.86 0.95 1.22 1.85 Outlet 65 m³/s 5.195 5.046 4.889 4.723 4.547 4.359 3.819 3.119 2.033 Inlet 70 59.5 5.56 9.82-10.4 W/(L/s) 0.87 0.94 1.01 1.08 1.16 1.24 1.47 1.77 2.30 Outlet 72 m³/s 5.216 5.068 4.910 4.739 4.554 4.352 3.748 2.884 Inlet 69 66.7 5.5 10.4-10.4 W/(L/s) 0.59 0.65 0.73 0.81 0.90 0.99 1.27 1.65 Outlet 71 m³/s 3.482 3.286 3.026 2.694 2.307 1.832 Inlet 58 62.4 1.5 3.9 7.6 2.8 W/(L/s) 0.37 0.44 0.52 0.62 0.74 0.89 Outlet 59 FLC* Amps at 230V / 1Ph / 50Hz input before a 1Ph to 3Ph Variable Speed Drive. FLC# Amps at 400V / 3Ph / 50Hz input before a 3Ph to 3Ph Variable Speed Drive. Exempt from ErP of the European Parliament. A variable speed drive (Eltadrive) must be installed with this fan. Data provided at standard air density of 1.2 kg/m³. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 197

SLIM QUBE SSQU-HT Dimensional Data B C OUTLET W E Spigot D OUTLET H A A B C D E Inlet Spigot Outlet (W x H) Weight kg SSQU1/4-3HT 500 60 226 280 195 315 165x440 33 SSQU2/4-3HT 670 78 285 350 211 500 225x610 65 SSQU22/4-3HT 670 80 308 350 257 400 248x610 68 SSQU3/4-3HT 820 78 323 344 255 560 242x740 81 SSQU23/4-3HT 820 80 385 474 293 500 305x740 120 SSQU4/4-3BHT 1020 99 426 469 347 710 346x940 180 SSQU24/4-3BHT 1020 99 426 474 389 630 346x940 182 SSQU4/4-3HT 1020 99 378 469 290 710 298x940 136 SSQU4/6-3HT 1020 99 426 469 290 710 346x940 152 Dimensions are in mm. 198 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

SLIM QUBE SSQU-HT Accessories Inverter Controller 1PH-3PH IP66 Inverter Controller 1PH-3PH IP20 Inverter Controller 3PH-3PH IP66 Inverter Controller 3PH-3PH IP20 Flexible Connections (each) Circular Silencer 1D Unpodded Circular Silencer 2D Unpodded SSQU1/4-3HT 149-ODE-2-12037-1KB1Y 149-ODE-2-12037-1KB12 149-ODE-2-14037-3KA1Y 149-ODE-2-14037-3KA12 063-0315-PU250 068-0315-1DENP 068-0315-2DENP SSQU2/4-3HT 149-ODE-2-12075-1KB1Y 149-ODE-2-12075-1KB12 149-ODE-2-14075-3KA1Y 149-ODE-2-14075-3KA12 063-0500-PU250 068-0500-1DENP 068-0500-2DENP SSQU22/4-3HT 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 063-0400-PU250 068-0400-1DENP 068-0400-2DENP SSQU3/4-3HT 149-ODE-2-12150-1KB1Y 149-ODE-2-12150-1KB12 149-ODE-2-14150-3KA1Y 149-ODE-2-14150-3KA12 063-0560-PU250 068-0560-1DENP 068-0560-2DENP SSQU23/4-3HT - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 063-0500-PU250 068-0500-1DENP 068-0500-2DENP SSQU4/4-3HT - - 149-ODE-2-24400-3KA4Y 149-ODE-2-24400-3KA42 063-0710-PU250 068-0710-1DENP 068-0710-2DENP SSQU24/4-3BHT - - 149-ODE-2-34055-3KA4Y 149-ODE-2-34055-3KA42 063-0630-PU250 068-0630-1DENP 068-0630-2DENP SSQU4/4-3BHT - - 149-ODE-2-34055-3KA4Y 149-ODE-2-34055-3KA42 063-0710-PU250 068-0710-1DENP 068-0710-2DENP SSQU4/6-3HT 149-ODE-2-22220-1KB4Y 149-ODE-2-12150-1KB12 149-ODE-2-24220-3KA4Y 149-ODE-2-24220-3KA42 063-0710-PU250 068-0710-1DENP 068-0710-2DENP Outlet Transition Piece External Roof Weather Hood (Vertical discharge only) Weather Hood (Horizontal discharge only) Wiring Diagram SSQU1/4-3HT 260-SSQU-TPO-A 039-SSQU-ER-A 064-SSQU-WHV-A 064-SSQU-WH-A 152-600 SSQU2/4-3HT 260-SSQU-TPO-B 039-SSQU-ER-B 064-SSQU-WHV-B 064-SSQU-WH-B 152-600 SSQU22/4-3HT 260-SSQU-TPO-C 039-SSQU-ER-C 064-SSQU-WHV-C 064-SSQU-WH-C 152-600 SSQU3/4-3HT 260-SSQU-TPO-D 039-SSQU-ER-C 064-SSQU-WHV-D 064-SSQU-WH-D 152-600 SSQU23/4-3HT 260-SSQU-TPO-E 039-SSQU-ER-D 064-SSQU-WHV-E 064-SSQU-WH-E 152-600 SSQU4/4-3HT 260-SSQU-TPO-F 039-SSQU-ER-D 064-SSQU-WHV-F 064-SSQU-WH-F 152-600 SSQU24/4-3BHT 260-SSQU-TPO-G 039-SSQU-ER-E 064-SSQU-WHV-G 064-SSQU-WH-G 152-601 SSQU4/4-3BHT 260-SSQU-TPO-G 039-SSQU-ER-E 064-SSQU-WHV-G 064-SSQU-WH-G 152-601 SSQU4/6-3HT 260-SSQU-TPO-G 039-SSQU-ER-D 064-SSQU-WHV-G 064-SSQU-WH-G 152-600 Fan & inverter packages available. Please contact Elta Fans for more information. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 199

SLIM QUBE SSQU-HT Notes 200 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Hazardous Area Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 201

202 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

REVOLUTION SLCX ATEX Long Cased Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 7 standard sizes from 355mm to 710mm. ü Air volume flow rates up to 6.8 m³/s. ü Static pressure up to 800 Pa. ü Suitable for operating temperatures up to +40 C. ü Suitable for extract or supply systems. ü Available in AC. CASING The all metal fan casing and guard provide a long lasting and robust construction. The units have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing. All casing parts are heavy gauge mild steel sheet, roll formed and welded, then hot dip galvanised to BS EN ISO 1461:1999 after fabrication. IMPELLER Adjustable pitch aerofoil impellers are provided with blades made from high quality carbon filled anti static material. Impellers are factory set at an angle to provide maximum performance. Hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are dynamically balanced to ISO 14694 Grade G6.3. MOTORS Motors according to Gas Zone, Ignition Temperature and Protection to Ex II 2G c IIC T4 X. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All ATEX units are to be tested to ISO 5801:1997 (airside performance) and BS 848 Part 2: 1985 (sound performance). TYPICAL APPLICATIONS Chemical Process Water and Sewage Treatment Material and Gas Waste Dust and Paint Extraction Battery Room Ventilation and Refrigeration ACCESSORIES For full accessories & controls information please visit eltaselect.com Ancillary Pack : APK Mounting Feet : 060B Matching Flanges : 061B Flexible Connections : 063 MAN AV Mounts (Set of 4) : 062 00 Bell Mouth Inlet : 241B Silencer : 068 DE*P(C) Impeller Side Guard : 078C Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 203

REVOLUTION SLCX Performance, SFP & Electrical Data AC THREE Phase - 380V to 415V / 50Hz Speed r/min Airflow SFP Airflow m³/s @ Static Pressure Pa 0 25 50 75 100 150 200 250 300 350 400 500 Overall Efficiency % Motor Electrical Data FLC Amps SC Amps Output kw dba @ 3m SLCX355/4-3 1360 SLCX400/4-3 1390 SLCX400/2-3 2820 SLCX450/4-3B 1390 SLCX450/2-3A 2820 SLCX500/4-3 1380 SLCX500/2-3 2820 SLCX500/2-3B 2900 SLCX560/4-3 1380 SLCX630/4-3 1410 SLCX710/4-3 1410 m³/s 0.860 0.821 0.773 0.716 0.648 Inlet 50 28.4 1.1 3.74 0.37 W/(L/s) 0.860 0.821 0.773 0.716 0.648 Outlet 49 m³/s 1.343 1.292 1.235 1.170 1.094 0.849 Inlet 53 31.1 1.6 6.56 0.55 W/(L/s) 0.36 0.38 0.41 0.44 0.47 0.60 Outlet 53 m³/s 2.601 2.554 2.507 2.462 2.416 2.322 2.224 2.117 1.998 1.858 1.690 Inlet 61 44.6 5 28 2.2 W/(L/s) 0.79 0.80 0.82 0.83 0.85 0.88 0.92 0.96 1.02 1.08 1.18 Outlet 61 m³/s 1.979 1.904 1.829 1.753 1.670 1.444 Inlet 56 37.6 1.6 7.79 0.75 W/(L/s) 0.32 0.35 0.38 0.41 0.45 0.54 Outlet 56 m³/s 2.998 2.961 2.923 2.885 2.845 2.764 2.679 2.587 2.487 2.377 2.250 1.900 Inlet 68 60.4 5 28 2.2 W/(L/s) 0.47 0.49 0.51 0.53 0.55 0.60 0.65 0.69 0.75 0.80 0.87 1.05 Outlet 68 m³/s 2.668 2.579 2.494 2.409 2.317 2.082 1.680 Inlet 62 53.0 2.7 11.1 1.1 W/(L/s) 0.37 0.40 0.43 0.45 0.47 0.53 0.64 Outlet 59 m³/s 3.642 3.584 3.527 3.468 3.410 3.291 3.168 3.042 2.910 2.771 2.622 2.274 Inlet 73 48.1 5 28 2.2 W/(L/s) 0.56 0.57 0.59 0.60 0.62 0.66 0.72 0.78 0.86 0.95 1.05 1.27 Outlet 73 m³/s 0.56 0.57 0.59 0.60 0.62 0.66 0.72 0.78 0.86 0.95 1.05 1.27 Inlet 80 53.0 8 56 4 W/(L/s) 0.89 0.91 0.93 0.95 0.97 1.00 1.04 1.09 1.13 1.17 1.22 1.32 Outlet 80 m³/s 3.739 3.646 3.551 3.452 3.347 3.102 2.749 Inlet 66 46.4 3.5 15.4 1.5 W/(L/s) 0.38 0.41 0.43 0.45 0.48 0.53 0.60 Outlet 62 m³/s 5.400 5.285 5.150 5.004 4.860 4.570 4.230 3.735 Inlet 66 51.0 6.5 35.75 3 W/(L/s) 0.42 0.44 0.47 0.49 0.51 0.56 0.61 0.69 Outlet 65 m³/s 6.661 6.515 6.376 6.238 6.099 5.805 5.462 5.003 4.355 Inlet 68 55.9 6.5 35.75 3 W/(L/s) 0.38 0.40 0.43 0.45 0.47 0.52 0.57 0.62 0.71 Outlet 71 Exempt from ErP of the European Parliament. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Data provided at standard air density of 1.2 kg/m³. Peak Amps @ 400V / 3Ph / 50Hz. 204 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

REVOLUTION SLCX Dimensional Data AC E HOLES ØF EQUI-SPACED ON G PCD TERMINAL BOX WITH CUSTOMER ENTRY ØK D AIR-FLOW M6 EARTH STUD ØA C ØB A B C D E F G K Weight kg SLCX355/4-3 355 425 375 255 8 10 395 M20 29 SLCX400/2-3 400 475 400 270 8 12 450 M20 43 SLCX400/4-3 400 475 400 270 8 12 450 M20 35 SLCX450/2-3A 450 530 450 290 8 12 500 M20 47 SLCX450/4-3B 450 530 450 290 8 12 500 M20 40 SLCX500/2-3 500 585 450 310 12 12 560 M20 51 SLCX500/2-3B 500 585 450 310 12 12 560 M20 68 SLCX500/4-3 500 585 450 310 12 12 560 M20 47 SLCX560/4-3 560 645 450 340 12 12 620 M20 63 SLCX630/4-3 630 715 450 355 12 12 690 M20 64 SLCX710/4-3 710 795 450 385 16 12 770 M20 70 Dimensions are in mm. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 205

REVOLUTION SLCX Accessories Impeller Side Guard Ancillary Pack* Mounting Feet (each) Matching Flanges (each) Flexible Connections (each) AV Mounts (set of 4) Bell Mouth Inlet SLCX355/4-3 078C-0350-C APKX350/002 060B-0350 061B-0350 063-0350-BM1060 062-002 241B-0350-BELL SLCX400/4-3 078C-0400-C APKX400/003 060B-0400 061B-0400 063-0400-BM1060 062-003 241B-0400-BELL SLCX400/2-3 078C-0400-C APKX400/002 060B-0400 061B-0400 063-0400-BM1060 062-002 241B-0400-BELL SLCX450/2-3A 078C-0450-C APKX450/003 060B-0450 061B-0450 063-0450-BM1060 062-003 241B-0450-BELL SLCX450/4-3B 078C-0450-C APKX450/003 060B-0450 061B-0450 063-0450-BM1060 062-003 241B-0450-BELL SLCX500/2-3 078C-0500-C APKX500/003 060B-0500 061B-0500 063-0500-BM1060 062-003 241B-0500-BELL SLCX500/2-3B 078C-0500-C APKX500/003 060B-0500 061B-0500 063-0500-BM1060 062-003 241B-0500-BELL SLCX500/4-3 078C-0500-C APKX500/003 060B-0500 061B-0500 063-0500-BM1060 062-003 241B-0500-BELL SLCX560/4-3 078C-0560-C APKX560/003 060B-0560 061B-0560 063-0560-BM1060 062-003 241B-0560-BELL SLCX630/4-3 078C-0630-C APKX630/003 060B-0630 061B-0630 063-0630-BM1060 062-003 241B-0630-BELL SLCX710/4-3 078C-0710-C APKX710/004 060B-0710 061B-0710 063-0710-BM1060 062-004 241B-0710-BELL Silencer 1D Podded Silencer 1D Unpodded Silencer 2D Podded Silencer 2D Unpodded Wiring DIagram SLCX355/4-3 068-0350-1DEP 068-0350-1DENP 068-0350-2DEP 068-0350-2DENP 152-612 SLCX400/2-3 068-0400-1DEP 068-0400-1DENP 068-0400-2DEP 068-0400-2DENP 152-612 SLCX400/4-3 068-0400-1DEP 068-0400-1DENP 068-0400-2DEP 068-0400-2DENP 152-612 SLCX450/2-3A 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP 068-0450-2DENP 152-612 SLCX450/4-3B 068-0450-1DEP 068-0450-1DENP 068-0450-2DEP 068-0450-2DENP 152-612 SLCX500/2-3 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-612 SLCX500/2-3B 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-612 SLCX500/4-3 068-0500-1DEP 068-0500-1DENP 068-0500-2DEP 068-0500-2DENP 152-612 SLCX560/4-3 068-0560-1DEP 068-0560-1DENP 068-0560-2DEP 068-0560-2DENP 152-612 SLCX630/4-3 068-0630-1DEP 068-0630-1DENP 068-0630-2DEP 068-0630-2DENP 152-612 SLCX710/4-3 068-0710-1DEP 068-0710-1DENP 068-0710-2DEP 068-0710-2DENP 152-612 * Consists of Flexible Connections, Matching Flanges, AV Mounts and Mounting Feet. 206 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

REVOLUTION SLCX Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 207

RAPTOR SFB ATEX Plate Mounted Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 4 standard sizes from 350mm to 650mm. ü Air volume flow rates up to 2.57 m³/s. ü Static pressure up to 125 Pa. ü Suitable for operating temperatures up to +40 C. ü Available in AC. Suitable for extract or supply systems. CASING The all metal fan casing and guard provides a long lasting and robust construction. The units have been constructed from mild steel and suitably treated to ensure full corrosion protection, the guard shall be powder coated polyester epoxy paint finish in black (RAL 9005). Fan plates shall have a surface coated to fulfil the requirements in DIN EN 13463-1 regarding electrostatic charges with paint finish in black (RAL 9005). IMPELLER Pressed aluminium impellers providing low noise and increased efficiency with protective measures between rotating and stationary components, dynamically balanced to ISO 14694 Grade G6.3, and finished in black (RAL 9005). MOTORS Motors are Ziehl-Abegg, highly efficient, lightweight external rotor motors with sealed for life, maintenance free ball bearings; which allows the fan to be installed at any angle. Motors are all suitable for speed control and each motor has temperature monitoring by integrated PTC Thermistor. Motors according to: Gas, Zone and ignition temperature. Protection to Ex II 2G c Ex e IIB T4 classified for constructional safety and fulfil the requirements stated in 94/4/EU (ATEX) directive. Fans are suitable for operating temperatures between -20 C and +40 C. Electrical connection to the motor is via a 650mm long flying lead. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SFB units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Chemical Process Water and Sewage Treatment Material and Gas Waste Dust and Paint Extraction Battery Room Ventilation and Refrigeration ACCESSORIES For full accessories & controls information please visit eltaselect.com Transformer Controller* : 149-TC Thermistor Protection Relay : 149-U-EK IP54 Option also available * Controller is not ATEX rated and must be mounted outside the hazardous area 208 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SFB Performance, SFP & Electrical Data AC THREE Phase - 380V to 415V / 50Hz Speed r/min SFB035-VDE.4Y.A4P 1428 SFB042-VDE.4Y.A4P 1402 SFB056-SDE.4Y.A4P 914 SFB065-SDE.4Y.A4P 894 Airflow SFP Airflow m³/s @ Static Pressure Pa 0 25 50 75 100 125 Overall Efficiency % Motor Electrical Data FLC Amps SC Amps Input kw dba @ 3m m³/s 0.707 0.649 0.587 0.502 Inlet 51 28.7 0.27 1.22 0.145 W/(L/s) 0.14 0.18 0.21 0.26 Outlet - m³/s 1.239 1.176 1.093 0.985 0.855 0.655 Inlet 55 29.9 0.60 2.76 0.310 W/(L/s) 0.17 0.20 0.23 0.27 0.34 0.47 Outlet - m³/s 1.837 1.658 1.419 Inlet 49 26.3 0.58 2.15 0.307 W/(L/s) 0.13 0.16 0.20 Outlet - m³/s 2.573 2.352 2.103 1.787 Inlet 54 31.6 0.80 2.96 0.439 W/(L/s) 0.12 0.15 0.18 0.24 Outlet - Exempt from ErP of the European Parliament. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Data provided at standard air density of 1.2 kg/m³. Peak Amps @ 400V / 3Ph / 50Hz. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 209

RAPTOR SFB Dimensional Data D E C FLYING LEAD A B 4 HOLES J DIA H F G A B C D E F G H J Weight kg SFB035-VDE.4Y.A4P 347 359 135 423 385 56 54 16 12 9 SFB042-VDE.4Y.A4P 416 435 135 503 460 62 54 16 14.5 11.5 SFB056-SDE.4Y.A4P 546 567 161 650 610 70 60 18 14.5 16 SFB065-SDE.4Y.A4P 644 667 182 770 730 80 60 18 14.5 20 Dimensions are in mm. 210 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR SFB Accessories Transformer Controller* Thermistor Protection Relay IP54 Protection Relay Enclosure SFB035-VDE.4Y.A4P 149-TC33 149-U-EK230E 149-U-EK230E-HOUSING SFB042-VDE.4Y.A4P 149-TC33 149-U-EK230E 149-U-EK230E-HOUSING SFB056-SDE.4Y.A4P 149-TC33 149-U-EK230E 149-U-EK230E-HOUSING SFB065-SDE.4Y.A4P 149-TC33 149-U-EK230E 149-U-EK230E-HOUSING * Controller is not ATEX rated and must be mounted outside the hazardous area. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 211

RAPTOR SFB Notes 212 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Destratification Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 213

214 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

ZOO FAN SDF Destratification and Spot Cooling During the heating season, rising heat results in thermal stratification that can make the area near the ceiling quite warm. As a result, the entire space must be overheated in order to maintain comfortable temperatures at floor level: See figure 1. Overheating results in significantly more energy consumption than necessary and usually creates hot and cold spots in a building. A ZOO Fan creates a gentle, concise column of air that brings warm air down to floor level, destratifies the space and reduces the temperature differential to as low as 1 overall: See figures 2 and 3. Figure 1: The above thermal image is from a CFD (Computational Fluid Dynamics) computer model of a 12.2m² space with a 7.6m flat ceiling deck and a ceiling-mounted heat source with a thermostat affixed 1.5m above the floor, set at 21 C Figure 2: This shows what happens almost immediately to this built-up heat when a ZOO Fan (represented by the white silhouette) is turned on in this CFD Analysis. Figure 3: Destratification results in an even temperature throughout the Zone Of Occupancy. Creature comfort improves noticeably and energy consumption is reduced, often significantly. Zone Of Occupancy Thermal stratification causes similar problems during the cooling season. Destratification of the occupied zone gives a uniform temperature throughout so no area needs to be over-cooled in order to maintain an acceptable temperature in other elsewhere. The concentrated columns of air produced by ZOO Fans eliminate the need for physical duct work, gently forcing the cool, conditioned air down to the Zone Of Occupancy. The HVAC systems cycle less, the air handlers run less, introduction of outside air is reduced and the air keeps moving. ZOO Fans, hung in closer proximity, can also be used as spot coolers. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 215

ZOO FAN SDF Destratification Ceiling Mounted Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü 2 standard sizes from 250mm to 300mm. ü Air volume flow rates up to 0.593m³/s (AC) and 0.656m³/s (EC). ü High quality Ziehl-Abegg FE2owlet. ü Suitable for operating temperatures up to +70 C. ü Fully speed controllable. ü Available in AC & EC. CASING The Fire-Resistant (5VB), UV-treated PC ABS plastic housing provides a long lasting and robust construction. IMPELLER Impellers are high quality Ziehl- Abegg FE2owlet in high performance composite material providing enhanced aerodynamic properties and reliability, dynamically balanced to ISO 14694 Grade G6.3, and finished in black (RAL 9005). MOTORS Motors are highly efficient AC or EC, lightweight external rotor motors suitable for speed control. Each motor has integral overload protection. Fans are supplied with a fitted IP54 terminal box, which allows the fan to be positioned conveniently to incoming electrical inputs. QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SDF units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Factories Sports Halls Shops Industrial units Warehousing ACCESSORIES For full accessories & controls information please visit eltaselect.com Transformer Controller : 149-TC Electronic Controller :149-POT 216 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

ZOO FAN SDF Performance, SFP & Electrical Data SINGLE Phase - 220V to 240V / 50Hz or 60Hz SDF250/4-1AC SDF300/4-1AC Frequency (Hz) FLC Amps Motor Electrical Data SC Amps Input kw r/min Max Volume m³/s Max Operating Temp C 50 0.24 0.40 0.048 1370 0.265 55 60 0.23 0.39 0.050 1590 0.310 70 50 0.41 0.63 0.095 1230 0.532 60 60 0.41 0.60 0.110 1360 0.593 55 dba @3m Inlet 37 Outlet 38 Inlet 41 Outlet 41 Inlet 43 Outlet 42 Inlet 46 Outlet 46 SINGLE Phase - 200V to 277V / 50Hz or 60Hz Motor Electrical Data FLC Amos Input kw r/min Max Volume m³/s Max Operating Temp C SDF250/4-1EC 0.77 0.113 2568 0.423 60 SDF300/4-1EC 1.01 0.150 1640 0.656 60 dba @3m Inlet 53 Outlet 53 Inlet 51 Outlet 49 Exempt from ErP of the European Parliament. Fan data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Data provided at standard air density of 1.2 kg/m³. Peak Amps @ 400V / 3Ph / 50Hz. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 217

ZOO FAN SDF Dimensional Data A F E B C D A B C D E F Weight kg SDF250 359 300 352 445 545 375 6.8 SDF300 452 367 421 533 656 460 10.5 Dimensions are in mm. Accessories Transformer Controller Electronic Controller Wiring Diagram SDF250/4-1AC 149-TC12-0-10 149-POT-10 152-177 SDF300/4-1AC 149-TC12-0-10 149-POT-10 152-177 149-POT-10 required if 149-TC12-0-10 is to be used in manual control. Electronic Controller Wiring Diagram SDF250/4-1EC 149-POT-10 152-00036 SDF300/4-1EC 149-POT-10 152-00036 218 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

ZOO FAN SDF Selecting a Zoo Fan The calculations for destratification are worked out using the volume of air within the area, rather than the floor area. 1. Calculate volume in metres by multiplying the length, width and average height: Length x Width x Average Height = Volume in m³ EXAMPLE 1. A big box store with a length of 75m, 50m width and a height of 7m has the following volume: 75 x 50 x 7 = Volume 26,250m³ 2. Next, determine which fan to use based on ceiling height. ZOO Fans are currently manufactured in two sizes: SDF250 AC: 0.265m³/s, EC: 0.423m³/s. Applications up to 9m height. SDF300 AC: 0.532m³/s, EC: 0.656m³/s. Applications up to 20m height. 2. As the celing height is less than 9m the SDF250 AC can be used: SDF250 AC 0.265m³/s. Applications up to 9m height. 3. After selecting the fan size you are going to use (SDF250 or SDF300), use the following formula: Volume m³ 3600 m³/s = number of fans to install Volume of the space in m³ 3600 (seconds in an hour) m³/s (of the fan selected) = the number of fans that are required to achieve one (1) air turn in one (1) hour. Every ZOO Fan is variable-speed controllable and can be angled easily, if need be, to direct the flow. This allows for ease of installation and control across a broad range of applications. By simply adjusting the speed of the fan, the two sizes and models shown above can effectively cover ceiling heights from 3m to 20m. In most cases it is best to use the SDF250 for ceiling heights up to 9m and the SDF300 for anything higher than 9m (see Other Considerations for additional information). 3. Using the formula and rounding the number up, it shows 28 AC SDF250 fans would be required: 26,250 3600 0.265 = 27.52 Other Considerations: There are some instances where you may consider the 300mm unit for lower ceiling heights. For example, with a ceiling height of 8m in a warehouse that is not constantly occupied, or where racking system and overhead truck doors are evident, you would select the 300mm or EC model to have the option of delivering a higher volume of air at floor level. You would also select the 300mm model for applications where you want to use the fans for spot cooling. In a more constantly occupied space where your ceiling height is 9m or less, and higher air speeds might cause discomfort for the occupants, it s preferable to use the SDF200. Examples would be a grocery store or a car showroom. This would create less draught and still destratify the space effectively. Height 7m Width Length 50m 75m Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 219

ZOO FAN SDF Notes 220 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Portable Cooling Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 221

222 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR COOLER SRC Circulating Axial Flow Portable Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy Efficiency Point please visit eltaselect.com. QUICK FACTS ü Available in 450mm only. ü Air volume flow rates up to 1.82 m³/s. ü Free standing. ü Suitable for operating temperatures up to +60 C. ü Variable fan position. ü Available in AC. CASING The all metal fan casing and guard provide a long lasting and robust construction. The units have been constructed from mild steel and suitably treated to ensure full corrosion protection. Fan casings are powder coated polyester epoxy paint finish in pastel beige (RAL 7032). The fan inlet and discharge shall be suitably protected by bright zinc plated steel wire guards. The unit shall be supplied complete with integral IP51 speed controller and flying lead fitted with 13A UK plug. IMPELLER Ziehl-Abegg FE2owlet impellers are provided with blades made from high quality pressure die cast aluminium or high performance composite material providing enhanced aerodynamic properties and increased efficiency, dynamically balanced to ISO 14964 Grade G6.3 and finished in black (RAL 9005). MOTORS Motors are highly efficient, lightweight external rotor motors, insulated to Class F, with integral thermal overload protection. Weatherproofed to IP54, QUALITY MANAGEMENT Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All PC units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance). TYPICAL APPLICATIONS Temporary Ventilation Construction Sites Machine Shops Welding Bays Foundries Marquees Workshops Gymnasiums Large Offices Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 223

RAPTOR COOLER SRC Performance, SFP & Electrical Data AC SINGLE Phase - 220V to 240V / 50Hz Speed r/min SRC450/4-1AC 1302 Airflow SFP Max Volume Overall Efficiency % FMEG N Motor Electrical Data Peak Amps SC Amps Input kw dba @ 3m m³/s 1.854 Inlet 50 34.0 42 2.45 5.3 0.545 W/(L/s) 0.28 Outlet 49 Exempt from ErP of the European Parliament. Fan data in accordance with ErP 327/2011 of the European Parliament. Measurement category used to determine energy efficiency: A. The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in db re-20µpa and is presented for comparative purposes only. Data provided at standard air density of 1.2 kg/m³. Peak Amps @ 400V / 3Ph / 50Hz. Dimensional Data A D B C A B C D Weight kg SRCC450/4-1 677 667 460 330 27 Dimensions are in mm. 224 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

RAPTOR COOLER SRC Notes Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 225

RAPTOR COOLER SRC Notes 226 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Additional s Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 227

DCV CONTROLS A selection of our fans are available with DCV controls The Principle Behind DCV Demand Control Ventilation or DCV, is a technological innovation that provides an effective, efficient means of using variable speed ventilation solutions to meet variable occupancy levels in spaces requiring ventilation. 149-DCV-CO2 149-DCV-DPT150 149-DCV-H1 149-DCV-HRT 149-DCV-PIR 149-DCV-TRT DCV Controls CO2 Transmitter Pressure Transmitter Room Humidistat Humidity Transmitter Presence Detector Temperature Transmitter Demand Control Ventilation allows the user to control the whole ventilation system, including all fans and components, to provide variable degrees of ventilation for changing occupancy levels. This is achieved by using different sensors to supply an array of different detection modules which identify the level of spatial contaminant within the building (e.g. people, temperature, CO₂, humidity etc). These sensors provide an almost infinite amount of possible variation to the ventilation system provided so that it matches almost identically, the level of occupation within the area to be ventilated. Zone Controller At the heart of the Elta Fans DCV system is the zone controller - designed to monitor and control one or more fan units simultaneously, with 6 preprogrammed fan applications. Each application has its own factory set parameters (input value range, set-points, P-band, min and max speeds) and control function. All of which can be changed in the field via the display unit, which is connected via a SELV cable and incorporates a digital display. Control Functions Remote enable (BMS) Trickle and boost Heater battery operation Fan run status (fan fail) Control input signal Time/clock Manual speed control Master/slave fan operation Twin fan operation (c/w duty share change over) Min/max speed settings for master or slave fan Sensors The DCV systems various sensors provide continuous real time feedback monitoring of the ambient air conditions through temperature, humidity, CO₂ or pressure in the occupied space. 228 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

DCV CONTROLS A selection of our fans are available with DCV controls Typical Classroom Environment Pick up ducting for fan DCV Zone Controller (integral to fan) Quietflow DCV Box Fan Ceiling Grille (Inlet) Ceiling Room Controller Sensor Exhausted air to outside ROOM CONTROLLER SENSORS PRESSURE SENSOR PASSIVE INFRARED DETECTOR SLAVE FAN - CO₂ - Humidity - Temperature For constant pressure For occupancy detection Operate a second fan from a single room controller Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 229

ARCO RANGE Axial Extract Fans residential OVERVIEW The ARCO range of intermittent extract fans are ideal for extracting stale air when required. They are suitable for wall, ceiling and window mounting. The Arco range of fans have been developed to provide energy efficient and silent ventilation. The Arco fans are available in 3 different cover options that all offer discrete styling. For full detailed information please visit homevent.co.uk. QUICK FACTS ü Available in 3 sizes to suit bathroom, utility and kitchen. ü 3 different styles; standard, automatic grille and design front facia. ü IPX4 to allow installation in Zones 1+2. ü Timer version available to allow run on after the trigger has been removed. ü Humidistat version to trigger the fan when there is excess humidity. AVIO In-Line Axial Fan residential OVERVIEW The AVIO range of intermittent extract fans are suitable for mounting in short duct lengths, allowing them to be used with more aesthetic grilles and the fan is hidden away. It is the perfect choice for extracting humid and stale air. The Avio range of fans have been developed to provide energy efficient and silent ventilation. For full detailed information please visit homevent.co.uk. QUICK FACTS ü Available in 3 sizes to suit bathroom, utility and kitchen. ü IPX4 to allow installation in Zones 1+2. ü Timer version available to allow run on after the trigger has been removed. ü Low Power consumption from under 8W. ü Aerodynamic impeller providing enhanced performance and sound. 230 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

CETO Axial Extract Fan residential OVERVIEW The CETO 100 is a centrifugal intermittent extract fan for extracting stale air from bathrooms. The fan develops high pressures allowing it to be used with longer duct runs where there is no external wall. Can be installed on wall or ceiling. For full detailed information please visit homevent.co.uk. QUICK FACTS ü IPX4 to allow installation in Zones 1+2. ü Integral back-draught shutter to prevent draughts entering the room when the fan is off. ü Improved performance thanks to the unique air straightener to optimise performance and reduce power consumption. ü Aesthetic front cover with discrete yet modern styling that goes well with a range of interior finishes. MORI MEV Centralised Mechanical Extract Ventilation Unit residential OVERVIEW A range of centralised continuously running, low energy, ultra-quiet extract fans that extract from multiple rooms such as kitchens, utility rooms, bathrooms, and toilets via a system of ductwork with a single discharge to atmosphere. For full detailed information please visit homevent.co.uk. QUICK FACTS üextremely low power consumption. Annual running costs as little as 5 per year for continuous operation. ü Ultra-Quiet. Almost imperceptible noise on background settings. ü Flexible installation. 4 inlet spigots to aid in installation and can simultaneously extract from multiple wet rooms to minimise system pressure drops. ü Very adaptable. Numerous control strategies to choose from and a wide duty range. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 231

MORI dmev Decentralised Mechanical Extract Ventilation residential OVERVIEW The MORI dmev range of fans, are continuously running mechanical extract fans which are suitable for installation in all wetrooms including kitchen, utility, bathroom and W.C. The range is class leading in terms of energy usage and noise. Continuously running fans use much less energy and have lower noise levels compared to intermittent fans and are often the best way to prevent the build-up of humidity. For full detailed information please visit homevent.co.uk. QUICK FACTS ü Extremely low power consumption. Annual running costs of less than 1 per year. ü Ultra-Quiet. Almost imperceptible noise on background settings. ü Aesthetically pleasing front cover. Discrete yet stylish, blends in well with different wall and ceiling finishes. ü Versatile. Suitable for wall, ceiling or window mounting in W.C., bathroom, kitchen and utility rooms. PIV LOFT Loft Mounted Positive Input Ventilation Unit residential OVERVIEW The PIV LOFT is a loft mounted ultra-quiet, low energy, low maintenance, home ventilation unit. The unit is designed to help ventilate a home using the well-established Positive Input Ventilation (PIV) principle. PIV units prevent and cure condensation and dampness related problems in homes. They are also used to control other indoor air pollutants and can be an effective means for controlling Radon gas in some properties. For full detailed information please visit homevent.co.uk. QUICK FACTS ü Small discrete, white plastic supply air diffuser which will blend well with any ceiling while distributing the air as required. ü Low energy ultra-low quiet fan/motor assembly. ü Robust, lightweight fan casing constructing. ü Large very long life, grade G4 filter. ü Integral, multi-functional controls to suit the individual requirements of a home and its occupants. 232 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

MORI HR Alternate, Supply & Extract Fan With Heat Retention residential OVERVIEW A range of continuously running, low energy ultra-quiet alternate flow supply and extract fans with heat retention facility for use in habitable rooms such as living rooms, bedrooms, dining rooms basements and hallways. The unit essentially helps a room breathe and reduces indoor air pollutants and humidity levels. It is an ideal unit for tackling problems associated with condensation dampness such as mould growth. For full detailed information please visit homevent.co.uk. QUICK FACTS ü Saves Energy Regenerative Heat Exchanger Recovers up to 90% of the heat that would otherwise be lost. ü Extremely Low Power Consumption, costs less than 2 a year to run and can save around 50 of heating bills. ü Very quiet running. ü Aesthetic Front Fascia The fascia is modern and discrete with a low profile to blend into any home. Easily removed for cleaning. VIGO RANGE Continuous Mechanical Ventilation With Heat Recovery residential OVERVIEW The VIGO range covers various models that provide supply and extract ventilation whilst recovering heat from the extract air that would otherwise be lost. There is a Vigo to suit any need from small flats and houses right up to large dwellings. All benefitting from the high level of development. For full detailed information please visit homevent.co.uk. QUICK FACTS ü Low Noise Internally the unit is aerodynamically designed to ensure noise levels are extremely low. ü Efficient Heat Recovery Up to 92% of the heat from the stale air is recovered via a highly efficient counter-flow heat exchanger. ü Energy efficient motors providing low running costs. ü Available with an automatic LCD Display with advanced control features. ü Horizontal and vertical models available. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 233

KOMFOVENT DOMEKT RVU Heat Recovery Unit heat recovery OVERVIEW The Komfovent DOMEKT Heat Recovery Units are designed to create healthy indoor air quality and comfort. Units are equipped with rotary heat exchangers. They are very efficient, easy to mount and maintain and offer integrated automatic control, PLUG & PLAY. For full detailed information please contact Elta Fans. QUICK FACTS ü Domekt available 50 600m³/h. ü Efficient energy recovery thermal efficiency up to 90%. ü Easy installation due to extra compact size and universal inspection side. ü Silent operation. ü Integrated automatic control. ü Available in EC. KOMFOVENT VERSO NRVU Heat Recovery Unit heat recovery OVERVIEW The Komfovent VERSO Heat Recovery Units are designed to create healthy indoor air quality and comfort in hotels, schools, nurseries, offices, conference halls and other premises. They are very efficient, easy to mount and maintain. Units are available with Heat Recovery or as Supply only. For full detailed information please contact Elta Fans. QUICK FACTS ü Verso available 1000 34000m³/h. ü Energy efficient solution. ü Rotary Wheel & Plate Heat Exchanger available. ü Pre wired Plug & Play Concept with integrated controls. ü Integrated automatic control. ü Energy efficiency tested and approved by EUROVENT. 234 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

Smoke & Car Park Ventilation The ventilation level to be provided within a car park (in order to limit the concentration of carbon monoxide and other vehicle emissions and to remove smoke in the event of a fire) can be found in the relevant Building Regulations and in BS 7346-7:2006 Components for smoke and heat control systems of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks. Elta Fans is a major supplier of axial flow fans for fresh air supply and extract as well as for emergency smoke ventilation systems. The SmokeVent range is specifically developed for general ventilation plus emergency smoke extract at either 200 C or 300 C for 2 hours using fans up to 2000mm in diameter or 400 C for 2 hours up to 1400mm in diameter. Elta can thus supply the main exhaust fans to operate in conjunction with the JetVent Induction fans. It is a mandatory requirement within the European Union that all smoke extract fans are independently tested to EN 12101-3:2002 Smoke and heat control systems Specification for powered smoke and heat exhaust ventilators. This standard covers the testing, design and production controls that are required before the manufacturer can obtain product certification from the appropriate notified body. All Elta Fans emergency smoke extract fans are included on EC Certificate of Conformity 0086-CPD- 493001. Smokevent LCS For for full technical information and much more, contact Elta Fans. Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 235

FAN SELECTION PROGRAM The Elta Fans Selection Program has been designed to make fan selection faster and more efficient. Developed from the ground up, the selection program makes it quicker and easier for you to select fans from our expansive range of products. Whether you ve used the program in a previously or if this is your first time, you will find this program a helpful part of your processes. Navigating the Program To navigate between the main areas of the program, simply use the main navigation buttons at the top. The program highlights the button to show which area of the program you are in. Basic Mode A dedicated Help source is available with the ability to define common default settings. Selecting a Fan Basic mode: allows you to use a 5 step process to determine suitable fans, or alternatively, use a single. Advanced mode: gives you complete control over the criteria for selecting your fan. Advanced Mode Silencers and Acoustic Analysis Silencer selection is available in both basic and advanced modes allowing a simple 5 step process to determine a suitable silencer or complete control over the criteria of the silencer type required. The Acoustic Analysis tool allows calculations on simple systems to be made to provide a rough approximation of what noise level can be expected. Our Fan Selection Program has become the essential software for consultants and contractors who want fast and accurate fan and silencer selections. Please contact Elta Fans for more information on 01384 275800. 236 Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans

FAN SELECTION PROGRAM Key Features The latest version has been designed to make it easier for you to select, compare and schedule fans and silencers with a number of powerful new features that will help you save time. ü A more user-friendly interface easier to find what you need based on a wide choice of criteria ü Basic and advanced user modes with guidance, use the program at the level that suits you ü Revolutionary support for variable speed fans helps you design more energy efficient systems Revolutionary Support ü Store all 2D.dwg and.dxf for a project in a folder in one quick step ü Conveniently view technical data in a single screen and recall it at any time ü Easily select energy efficient fans and calculate running costs ü Fully integrated PDF and Excel output promoting the efficient electronic flow of data and further compliment paperless offices Store All Files Convenient Data View PDF Output Select Efficient Fans Tel: 01384 275800 Fax: 01384 275810 Email: bs@eltafans.co.uk Visit: eltaselect.com Twitter: @eltafans 237

With expertise in innovative fan design and manufacture dating back over 40 years. Bringing a continuum of product innovation and technical support focused on the needs of the customer. Today Elta Fans boasts a comprehensive range of standard and non-standard products for building services and residential applications. eltafans.com TM Idealair Group offer a wide range of standard products available immediately from stock to meet volume requirements, coupled with the ability to design and supply bespoke air distribution products to suit specific project requirements, idealair group can offer product guidance and provide the best solution available. idealairgroup.co.uk egbuildingservices..co.uk

Elta Group Building Services unites existing brands under one umbrella to create a singular, comprehensive portfolio of products. This range of highly competitive products will enable the business to satisfy larger and more diverse project specification, whilst extending the reach of their exceptional customer service operations. Air Design is an innovative manufacturer of air handling units (AHU) and heat recovery units (HRU) aimed primarily at the building services market, but also meeting the requirements of specialised applications. Operating from our dedicated engineering and production facility in the UK. air-design.com Hydor Building Services manufacture and supply cost effective products for residential, commercial and industrial applications, providing additional flexibility for specification clients and the wholesale market as completing the Elta Group Building Services portfolio with a unique range of washroom and hygiene products. hydor.co.uk/building-services