is a constant temperature controller. It is designed for mounting on mixing valve. It is also equipped with mounting kit for assembly on mixing valves of other manufacturers. Controller has a fixed angle rotation of 90 and possibility of manual control. With DIP switches inside actuator is possible to set the following parameters: - Direction of rotation (direct CW / inverse CCW) - Different temperature ranges depending on the application - Reaction factor x/x0 Technical data It is intended for: maintaining a constant temperature in boiler heating circuit (protection against condensation), use in under floor heating applications, industrial processes, heat accumulators, use in domestic hot water systems or swimming pools (individual systems, SPA, public swimming pools). Electrical data Supply voltage 4VAC, 50Hz, ± 0% Power Connection cable 5VA x0,5mm, length m Sensor type Functional data Torque max Nm Rotation time anual override KTY 8-0 PVC (cable length.5m), insulation: -30 C to 05 C (adapter set enclosed) 73s/90 anual or with pushbutton (for maintenance purposes) Position indication Recommended mounting position DIP switch settings Handle position on controller cover All positions except upside down. Direction of rotation (direct CW / inverse CCW). Different temperature ranges depending on the application (0 C..00 C, 60 C..85, 0 C..70 C, 5 C..45 C) 3. Reaction factor x/x0 Safety Protection class II Degree of protection IP44 (IEC 6059 (00-0)) Enclosed mounting kit Ambient temperature edia temperature Storage temperature aintenance Weight 0..+55 C According to valve's specifications -0...+80 C aintenance-free Approx. 480g (without valve) FIRŠT (ROTOIX, ROTOIX G), ESBE (VRG, VRB), ACASO (TEROIX), BARBERI, FEROTER, PAW, EUROR, ESBE, IP, DANFOSS, BESSER, SELTR, LOVATO, TUXHORN, STRAWA, CIBERIO FIRŠT-ROTOTEHNIKA, s.p., Radegunda 54, 3330 ozirje, info@?rst.si, http://www.?rst.si PE VELENJE: Koroška c. 56a, 330 Velenje, tel:++386 (0)3 898 35 00, fax: ++386 (0)3 898 35 35 cx4-0-uni-tep-product-info_v-en.cdr
Electrical installation: l=,5m Sensor KTY8-0 Ø9 45! 4VAC, 50Hz Dimensions: R-B-0 4V, 50Hz, 5VA IP44, max Nm AN POWER 4V rjava/brown modra/blue 888 T( C) IN T 78 90 90 AUTO-AN AUTO AX 5 Order information: Code Article Voltage Time Torque 35 /R-B-0 4VAC, 50Hz 73s/90 max. Nm Enclosed mounting kit for following mixing valves: FIRŠT (ROTOIX, ROTOIX G), ESBE (VRG, VRB), ACASO (TEROIX), BARBERI, FEROTER, PAW, EUROR, ESBE, IP, DANFOSS, BESSER, SELTR, LOVATO, TUXHORN, STRAWA, CIBERIO. Safety notes: The actuator has been designed for use in stationary heating, ventilation and airconditioning systems and is not allowed to be used outside the specified field of application, especially in aircraft or in any other airborne means of transport. Caution power supply voltage 4VAC. It may only be installed by suitably trained personnel. All applicable legal or institutional installation regulations must be complied with. The device must be protected from moisture and is not recommended for use in external applications. The device may only be opened at the manufacturer's site. It does not contain any parts that can be replaced or repaired by the user. The cable must not be removed from the device. The device contains electrical and electronic components and is not allowed to be disposed of as household refuse. All locally valid regulations and requirements must be observed. www.first.si
ounting on the valve: 3-way mixing brass valve ROTOIX F3 ROTOIX F4 FIRŠT (ROTOIX G), ESBE, ACASO (TEROIX), BARBERI, FEROTHER, PAW, EUROR, IP, DANFOSS, BESSER ixing valves ESBE VRB, VRG ounting kit Code 5804 Enclosed mounting kit FIRŠT (ROTOIX, ROTOIX G), ESBE (VRG, VRB), ACASO (TEROIX), BARBERI, FEROTER, PAW, EUROR, ESBE, IP, DANFOSS, BESSER, SELTR, LOVATO, TUXHORN, STRAWA, CIBERIO By special request 5805 SELTR, LOVATO, PAW 5806 LAZZARI, LANDIS 5807 HEYWELL S 5808 SIEENS 5809 UT 58030 W.I.L.B 5803 CENTRA 5803 EIBES, WITA, OVENTROP, HOLTER HORA BR80 SD/SV 58033 TEHNOPLANT, EXCELSIOR, KRAER, DE PALA www.first.si 3
Settings: AN AUTO echanical indication. Indicator can be set according to the valve assembly Button for manual/auto control 3 Handle for manually controlling the drive, which also serves for the indication position of the valve 4 Button for adjusting the required temperature. When adjusting the temperature, the set value flashes on LCD screen. 888 5 LCD screen for displaying temperature LED Xp CO FIRST UNI RB 3 4 DIP switches and trimmer Xp are located inside controller. To open the controller it is necessary to loosen the screws on the cover (3x), and handle screw (x). LED indication of operation: - Blinking controller calibration - : normal operation Xp parameter - a proportional control range of valve (from 0K to 00K) 3 4 With DIP switches inside actuator is possible to set the following parameters: DIP Direction of rotation (direct CW / inverse CCW) DIP,3 Different temperature ranges depending on the application (0 C..00 C, 60 C..85, 0 C..70 C, 5 C..45 C) DIP 4 Reaction factor NOTE when changing DIP position, controller calibration is carried out Xp parameter a proportional control range of valve min 3 4 max DIP switch settings CW 3 4 CCW Temperature range setting x0 x 3 4 Temperature range setting DIP 0 C..00 C 60 C..85 0 C..70 C 5 C..45 C OFF OFF 3 OFF OFF www.first.si 4
Controller behavior diagram as a function of temperature: Example: -Desired temperature: 50 C -Xp parameter proportional control range of valve (0K) T ( C) 55 00% closing opening area Xp = 0K 50 Tset = 50 C 45 closing area 00% opening valve opening opening closing valve closing t set temperature 45 C 50 C 55 C valve opening opening closing valve closing Xp =0K less than 45 C, controller gives continuous signal for opening mixing valve. between 45 C and 50 C, controller pulsating opens mixing valve. between 50 C and 55 C, controller pulsating closes mixing valve. higher than 55 C, controller gives continuous signal for closing mixing valve. anual control: Recommended mounting position 90 90 Note: when the button for manual operation is in <AN> position, controller stays in temporary position irrespective of control signal. 90 90 www.first.si 5
Examples: Solid fuel boiler - aintain a constant temperature in heating circuit aintain a constant temperature of heat reservoir UNI TEP DTC00/ aintain a constant temperature in sanitary water circuit Floor heating - aintain a constant temperature of heating circuit Solar pool heating - aintain a constant temperature of heating circuit ROTOTER R-TR UNI TEP Floor heating regulation from radiator heating circuit www.first.si 6
In compliance with standards All our products fulfil the essential safety and protection requirements for CE conformity marking according to the following directives: EC directive: 004/08/EEC / LV directive: 006/95/EEC / PAH directive 005/69/EEC. In compliance with standards: EN 60730--4; 997 + A:00 + A:005 + A:008 EN60730-:000 + A:003 + A:004 + A4:005 + A6:007 + A:008 EN 5504-:006 EN 6000-3-:006 EN 6000-3-3:006 EN 633:008 ZEK 0.-08 We reserve the right to modify the instructions and the technical data of the product without prior notice. PE VELENJE: Koroška c. 56a, 330 Velenje tel: 03 / 898 35 00, fax: 03 / 898 35 35 FIRŠT-ROTOTEHNIKA, s.p., Radegunda 54, 3330 ozirje info@?rst.si, http://www.?rst.si www.first.si 7