STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS
STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG 23 / G-32 Barrel nipple EN 024 /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG 22 / G-3 Running nipple EN 024 /8" 6", thread ISO 228/ Standard and special length Material 36/304 36Ti/32 EM 6 / G-323 Full sockets EN 024 /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EM 6 D / G-324 Half sockets EN 024 /8" 6", thread EN 0226, ISO 7- Material 36/304 36Ti/32 EG 6 / G-322 90 Bends, M/M EN 024 /8" 2", thread EN 0226, ISO 7- Material 36/304 36Ti/32 EF 30 / F-46 Hexagon nuts /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 90 / F-4 90 Elbows, F/F /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 92 / F-44 90 Street elbows, M/F /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 90 R / F-4 R 90 Red, elbows, F/F /4" x /8" 2" x /2", thread EN 0226, ISO 7- Material 36/304 EF 20 / F-43 45 Elbows /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 30 / F-42 Tees /8" 4", thread EN 0226, ISO 7- Material 36/304 ALL UNIONS ALSO FULLY MACHINED AVAILABLE EF 30 R / F-42 R Red. Tees /4" x /8" x /4" 2" x /2" x 2", thread EN 0226, ISO 7- Material 36/304 EF 80 / F-422 Crosses /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 340 / F-42 A Unions conical, F/F /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 330 / F-42 B Unions flat, F/F /8" 4", thread EN 0226, ISO 7- Material 36/304
STAINLESS STEEL SCREWED FITTINGS EF 34 / F-423 A Unions conical, M/F /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 33 / F-423 B Unions flat, M/M /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 340 S / F-47 A Unions conical, butt weld /8" 4" Material 36/304 EF 330 S / F-47 B Unions flat, butt weld /8" 4" Material 36/304 EF 280 / F-43 Hexagon nipples /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 245 / F-45 Hexagon red. nipples /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 936 / G-325 Hose nipples /8" 2", thread EN 0226, ISO 7- Material 36/304 EF 24 / F-44 Bushing /8" 4", thread EN 0226, ISO 7- various reductions Material 36/304 EF 240 / F-442 Reducing couplings /8" 4", thread EN 0226, ISO 7- various reductions Material 36/304 EF 300 / F-432 Round caps /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 30 / F-463 Hexagon caps /8" 4", thread EN 0226, ISO 7- Material 36/304 EF 29 / F-433 Square plugs /8" 4", thread EN 0226, ISO 7- Material 36/304 For the dimensions of the casted 50 lbs BSP fittings please refer to the measurement table. We can deliver all articles also with an NPT thread. Other materials available upon request. EF 292 / F-452 Hexagon plugs /8" 4", thread EN 0226, ISO 7- Material 36/304 F-453 Hexagon head screw plugs Heavy type /8" 2", thread EN 0226, ISO 228/, Material 36/304 EF 400 Pipe clamps DIN 3567a and other standards on request Material 32/36Ti 36/304
STAINLESS STEEL BUTT WELD FITTINGS AND FLANGES Elbows: Dimensions: Material: Produced from either seamless or welded pipes /8" 24", Sch 5S/0S/40S/80S/60S/XXS ASTM A 403 ANSI B 6.9/90 and 45, L.R./S.R. DIN 2605 part and part 2 304, 36, 36L, 304L, 36Ti, 32, nickel alloys, duplex, superduplex, copper-nickel, all materials for cold forming Tees and reducers: Dimensions: Material: seamless or welded /8" 24", Sch 5S/0S/40S/80S/60S/XXS ASTM A 403 ANSI B 6.9 DIN 265, DIN 266 304, 36, 36L, 304L, 36Ti, 32, nickel alloys, duplex, superduplex, copper-nickel, all materials for cold forming Weld neck flanges 50lbs/300lbs ASTM A 82, ANSI B 6.5 DIN 2627 and DIN 2638 304L/36L/32/36Ti Slip on flanges 50lbs/300lbs ASTM A 82, ANSI B 6.5 DIN 2642 and DIN 2656 304L/36L/32/36Ti Blind flanges 50lbs/300lbs ASTM A 82, ANSI B 6.5 DIN 2527 PN 6-400 304L/36L/32/36Ti Threaded flanges DIN 2566 PN 0/6 DIN 2567 PN 40 /8" 4", EN 0226 304L/36L/32/36Ti Pressed collars DIN 2642 PN 0 DIN 264 PN 40 Stub ends MSS SP-43 304L/36L/32/36Ti Lapped flanges in aluminium Caps ASTM A 403 ANSI B 6.9, DIN 267/DIN 280 DIN 267 304L/36L/32/36Ti???????????????????????????
STAINLESS STEEL VALVES A-590 TD -Pc. Ball valve 000PSI threaded ends EN 0226 red. bore, /4" 2" A-62 TLD 2-Pc. Ball valve 000PSI face to face DIN 3202/M3 threaded ends EN 0226 full bore, /4" 3" A-622 TLD 2-Pc. Ball valve 000PSI threaded ends EN 0226 full bore, /4" 2" A-660 F 2-Pc. DIN flanged Ball valve PN 6 full bore DIN 5-250 A-64 TLD 3-Pc. Ball valve 000PSI threaded ends EN 0226 full bore, /4" 4" A-64 TSLD 3-Pc. Ball valve 000PSI Butt weld ends full bore, /4" 4" A-730 TT/TL 3-Way Ball valve 000PSI threaded ends EN 0226 full bore, /2" 2" A-680 F -Pc. Wafer flnged ball valve 000PSI DN 5-50/DN 65-50 CF8M ALL BALL VALVES AVAILABLE WITH LOCKING DEVICE. ALSO THE THREADED VALVES AVAILABLE WITH THREAD ISO 228. A-670 T Gate valve 200PSI threaded ends EN 0226 /2" 2" A-650 T Globe valve 200PSI threaded ends EN 0226 /4" 2" A- T Y-Spring check valve 200PSI threaded ends EN 0226 /4" 2" A-690 T Swing check valve 200PSI threaded ends EN 0226 /4" 2" A-26 T Y-Strainer 600PSI threaded ends EN 0226 /4" 2" A-64 ST 3-Pc. Ball valve with actuator /4" 4" 2-Pc. Flanged ball valve with actuator
CASTED, FORGED AND TURNING WORK PIECES AVAILABLE ACC: TO CUSTOMER SPECIFICATION
STAINLESS STEEL FITTINGS, TUBES, PLATES AND BARS Stainless steel pipe couplings and repair clamps universal installations for all sorts of pipe and applications tensile strength and not tensile strength, for all materials, 26.9 mm - 2000 mm Stainless steel compression fittings Single ferrule and double ferrule 6-42 mm, DIN EN ISO 8434- (DIN 2353) material 36Ti/36L Stainless steel press fittings with DVGW approval 5 mm - 08 mm Material.440/.4404 Stainless steel tubes acc. to DVGW W - 54 5 x.0 mm - 08mm x mm Material.440/.4404 Stainless steel welded tubes DIN EN 027-7, Pk ASTM A-32 test certificate EN 0204 3. AD-W 2 upon request manufacturing length of approx. 6000mm Stainless steel seamless tubes DIN EN 026-5, ASTM A-32 test certificate EN 0204 3. AD-W 2 upon request manufacturing length of approx. 6000mm Stainless steel long products round bars, flat bars, angles, square bars EN 00088-3 Material 36 Ti, 32, 304, 36 etc. Stainless steel sheets and plates EN 0008-2 Tolerances En 0259 Material 36 Ti, 32, 304, 36 etc. Fittings produced out of steel, malleable cast iron, aluminium, copper and brass also available upon request (please see www.rm-fittings.de)
STAINLESS STEEL AISI 304 DIN X 5 CrNi 8 0 C SI Mn Cr 0.07 Chemical compositions.0 7.0 20.0 Mo Ni 8.5 0.0 other alloys 95 Rp 0.2 % (N/mm 2 ) yield strength Rp % (N/mm 2 ) yield strength 230 Range of applications RM (N/mm 2 ) tensile strength Attributes other names German M-No..430 304L 32 347 X 2 CrNi 9 X 6 CrNiTi 8 0 X 6 CrNiNb 8 0 0.03 0. 0..0.0.0 7.0 20.0 7.0 9.0 7.0 9.0 0.0 9.0.5 9.0.5 Ti 5 x % C Nb 0 x % C 80 205 205 25 240 245 460 680 730 50 740 Water and slightly contaminated waste water, foodstuffs and organic acids, generally up to 4.5 ph unchanging in agressive low chlorides. V 2 A.4306.454.4550 CF8M G X 5 CrNiMo 9 2 0.08.5 3.0 Rustless, cast for valves, pumps and vessels..4408 36 36L X 5 CrNiMo 7 2 2 X 2 CrNiMo 7 3 2 0.07 0.03.0.0 6.5 8.5 6.5 8.5 0.5 3.5.0 4.0 Ti 5 x % C 205 95 245 235 450 Higher resistance than first category. Prefered in chemical installations, purifaction plants, paper industries, esp. at higher chloride concentration. V 4 A.440.4404 36Ti 36 36L X 6 CrNiMoTi 7 2 2 X 5 CrNiMo 7 3 3 X 2 CrNiMo 8 4 3 0.08 0.07 0.03.0.0.0 6.5 8.5 6.5 8.5 7.0 8.5 3.0 3.0 0.5 3.5.0 4.0 5.0 25 205 95 250 245 235 750 450 A greater resistance level than the previous category against non oxidizing acids and aggressive chlorides..457.4436.4435 UNS 3254 X NiCrMoCuN 25 20 6 0.02.0 9.0 6.0 7.0 24.0 26.0 Cu =.0 N = 0. 0.25 300 340 650 850 Highest resistance in acid chloridecontaining mediums, e.g. sea-water and strong sulfuvic acid. Avesta 254 SMO.4529 904 L X NiCrMoCu 25 20 0.02.0 9.0 4.0 5.0 24.0 26.0 Cu =.5 220 250 750 Highest resistance against phosphate and sulphate mediums coinciding with chloride-contaminations. Uranus B 6 Uddeholm 904L.4539 UNS S 3808 X 2 CrNiMoN 22 5 3 0.03.0 23.0 3.5 4.5 6.5 N = 0.08 0.20 480 640 900 High resistance to fractures in neutral chloriecontaining mediums and acetous gasses. FAL C 223 AF 22.4462 Metric conversions DN 6 8 0 5 20 25 32 40 50 65 80 00 25 50 200 250 300 350 400 450 600 o. d. mm /8 0.2 /4 3.5 3 /8 7.2 /2 2.3 3 /4 26.9 33.7 /4 42.4 /2 48.3 2 60.3 2 /2 76. 3 88.9 4 4.3 5 39.7 6 68.3 8 29. 0 273.0 2 323.9 4 355.6 6 406.4 8 457 20 508 24 60 Further dim. od/mm diff. wallth. 2 5 8 20 23 25 28 30 3,8 35 38 40 43 44,5 5 53 54 57 63.5 68 69 70 73 83 84 85 0.6 03 04 08 29 33 54 59 204 254 304 354 RHEIN- MAIN FITTINGS RM Fittings Handelsgesellschaft mbh Lammertstraße 5-9 63075 Offenbach Fon: (0 69) 86 78 83-0 Fax: (0 69) 86 80 2 www.rm-fittings.de weigand@rm-fittings.de