LABORATORY FURNITURE SERVICE FIXTURES, COUNTER TOPS AND SINKS

LABORATORY FURNITURE SERVICE FIXTURES, COUNTER TOPS AND SINKS

Table Of Contents Fixtures Page Number Service Turrets and Valves 02 Multiple Service Fixtures.06 Standard Service Fixtures. 07 Vacuum Breakers.10 Pure Water Fittings..10 Fume Hood Fittings.11 Safety Showers/Eyewash. 12 Countertops.. 14 Sinks.15 Pegboards and Balance Table.. Electrical Services...19 Keur Industries Inc. reserves the right to add, change, drop, or replace products without notice.

Turrets and Flanges Combo Valve. Flange and Turrett 986-909 Wall Flange with Ball Valve and Inlet Shank Air, Gas and Vacuum Buttons 979-001K - 3/8" NPT x 2 5/8" Inlet Shank with Locknut & Washer 986-937CHCP Wall Flange with Needle Valve and Inlet Shank Air, Gas and Vacuum Buttons 979-001K - 3/8" NPT x 2 5/8" Inlet Shank with Locknut & Washer 986-FCP Wall Flange 979-001K - 3/8" NPT x 2 5/8" Inlet Shank with Locknut & Washer (Order Separately) 3/8" NPT Female Inlet Thread 3/8" NPT Female Outlet Thread 980-909-957-3KCP Turret with Single Ball Valve E7T - Removable Serrated Hose Nozzle Air, Gas and Vacuum Buttons 957-003K - 3/8" NPT x 4 3/4" Inlet Shank Assembly - Required for Installation (Order Separately) 980-937CHCP Turret with Single Needle Valve E7T - Removable Serrated Hose Nozzle 204 - Cross Handle with Air, Gas and Vacuum Buttons 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation (Order Separately) 981-909-957-3KCP Turret with Two Ball Valves @ 0 with Mounting Shank (Shipped Loose) E7T - Removable Serrated Hose Nozzle Air, Gas and Vacuum Index Buttons Included 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation (Order Separately) 2

981-937CHCP Turret with Two Ball Valves @ 0 E7T - Removable Serrated Hose Nozzle 204 - Cross Handle with Air, Gas and Vacuum Index Buttons 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation 981-WS909CP Turret with Two Ball Valves @ 0 and Inlet Shank Air, Gas and Vacuum Index Buttons Included 957-003K - 3/8" NPT x 4 3/4" Inlet Shank with Locknut and Washer 982-909-957-3KCP 983-909CP Turret with Two Ball Valves @ 90 E7T - Removable Serrated Hose Nozzle Air, Gas and Vacuum Buttons 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation Turret with Three Ball Valves @ 90 Air, Gas and Vacuum Index Buttons Included 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation (Order Separately) 987-909CP "Y" Pattern Wall Flange with Two Ball Valves @ 90 Air, Gas and Vacuum Buttons 979-001K - - 3/8" NPT x 2 5/8" Inlet Shank with Locknut & Washer 980-CP Turret with One Side Outlet 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation (Order Separately) 3/8" NPT Female Threaded Inlet 3/8" NPT Female Outlet Thread 3

Turrets and Flanges Flange 986-CP Wall Flange and Inlet Shank 979-001K - 3/8" NPT x 2 5/8" Inlet Shank with Locknut & Washer 3/8" IPS Male Inlet 3/8" IPS Female Outlet 987-CP "Y" Pattern Wall Flange and Inlet Shank 979-001K - 3/8" NPT x 2 5/8" Inlet Shank with Locknut & Washer 3/8" NPT Male Inlet Thread 3/8" NPT Female Outlet Thread 987-FCP 981-CP "Y" Pattern Wall Flange 979-001K - 3/8" NPT x 2 5/8" Inlet Shank with Locknut & Washer (Order Separately) 3/8" NPT Female Inlet Thread 3/8" NPT Female Outlet Thread Turret with Two Side Outlets @ 0 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation (Order Separately) 3/8" NPT Female Inlet Thread 3/8" NPT Female Outlet Thread 981-WSCP 982-CP Turret with Two Ball Valves @ 0 and Inlet Shank 3/8" X 4 3/4" NPT Inlet Shank Turret with Two Side Outlets @ 90 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation (Order Separately) Not ADA Compliant 982-WSCP 984-CP Turret with Two side outlets @ 90 with mounting shank 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation 3/8" NPT Female Inlet Thread Not ADA Compliant Turret with four side outlets @ 90 with mounting shank 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation (Order Separately) 3/8" IPS Female Inlet 3/8" NPT Female Outlet Thread 4

Valves Gas Valve 937-CHCP Needle Valve 204 - Cross Handle with Air, Gas and Vacuum Buttons May Be Used with Most Laboratory Gases 937-CHLESS216-28CP Needle Valve 204 - Cross Handle Less Index Button Index Button Purchased Separately Valves Multiple Service Valve 909-CP Ball Valve Air, Gas and Vacuum Buttons3 3/8" NPT Male Inlet Thread Valves Water Valve 937-CP Water Valve 204 - Cross Handle with Water Index Button 3/8" NPT Male Inlet Thread Note: Specify type of color coded index buttons required. 5

Multiple Service Fitting Chicago Faucets multiple service laboratory products provide multiple gas and water fittings conserving valuable countertop space. Perfect for high use laboratory applications. Solid brass construction with a high-gloss polished chrome finish and color coded handle index buttons. 1301-CP Deck Mounted Multiple Service Fitting GN2B - Rigid/Swing Gooseneck Spout E7-Outlet - Removable Serrated Hose Nozzle 204-Handle - Cross Handle with Cold Water Index 1301-GN2BVBE7CP Deck Mounted Multiple Service Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout E7-Outlet - Removable Serrated Hose Nozzle 204-Handle - Cross Handle with Cold Water Index Button 1332-CP Deck Mounted Dual Service Fitting One Piece Cast Brass Spout 205 - Plastic Cross Handle with Water Index Button 1332-E22E7CP Deck Mounted Dual Service Fitting One Piece Cast Brass Spout 205 - Plastic Cross Handle with Water Index Button 6

Standard Service Fitting - 8" Centers Chicago Faucets 8 widespread deck mount laboratory fittings feature solid brass construction with a high-gloss polished chrome finish. Available with serrated nozzle, color coded handles and vacuum breaker. Standard 1/2 NPS male inlet to match most plumbing preps. The slow compression cartridge allows for fine flow control of water, operates in 1 1/4 turns and is repairable lowering maintenance costs. 946-CP Deck Mounted Hot and Cold Water Fitting GN2B - Rigid/Swing Gooseneck Spout 204 - Cross Handles with Hot and Cold Water Index Buttons 947-CP Deck Mounted Hot and Cold Water Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 204 - Cross Handles with Hot and Cold Water Index Buttons Standard Service Fitting - Adjustable 7 1/4"- 8 3/4" Centers Chicago Faucets wall mount laboratory fittings feature adjustable centers for increased installation flexibility. Available with serrated nozzle, color-coded handles and vacuum breaker. Solid brass construction with a high-gloss polished chrome finish. These rugged faucets are the perfect choice for any laboratory application. The slow compression cartridge allows for fine flow control of water, operates in 1 1/4 turns and is repairable lowering maintenance costs. 942-CP Wall Mounted Fitting GN2B - Rigid/Swing Gooseneck Spout 204 - Cross Handles with Hot and Cold Water Index Buttons 943-CP Wall Mounted Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 204 - Cross Handles with Hot and Cold Water Index Buttons 7

Single Hole These cold-water laboratory fittings feature durable, solid brass construction and a high-gloss polished chrome finish. Fixtures are supplied with a green CW index button, unless otherwise specified. 927-CP Deck Mounted Single Water Inlet Fitting GN2B - Rigid/Swing Gooseneck Spout 204 - Cross Handle with Cold Water Index Button 928-317CP Deck Mounted Single Water Inlet Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout E8 - Removable Serrated Hose Nozzle 317 - Wrist Blade Handle with Cold Water Service Button NSF 61, Section 9 928-369CP Deck Mounted Single Water Inlet Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 369 - Lever Handle with Cold Water Index Button 928-CP Deck Mounted Single Water Inlet Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 204 - Cross Handle with Cold Water Index Button 928-VRCP Vandal Resistant Deck Mounted Single Water Inlet Fitting GN2BVB - Rigid Gooseneck Spout 204 - Cross Handle with Cold Water Index Button 8

These fixtures are for general hot/cold laboratory water service. They can be provided with fixed or swinging spouts. 929-CP Deck Mounted Hot and Cold Water Fitting GN2B - Rigid/Swing Gooseneck Spout 204 - Cross Handles with Hot and Cold Water Index Buttons 930-317CP Deck Mounted Hot and Cold Water Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 317 - Lever Handles with Hot and Cold Water Index Buttons 930-369CP Deck Mounted Hot and Cold Water Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 369 - Lever Handles with Hot and Cold Water Index Buttons Quaturn Operating Cartridge 930-CP Deck Mounted Hot and Cold Water Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 204 - Cross Handles with Hot and Cold Water Service Buttons 930-GN8VBE7CP Deck Mounted Hot and Cold Water Fitting GN8BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 204 - Cross Handles with Hot and Cold Water Service Buttons 985-AWSGN2BVBE7CP Deck Mounted Single Water Inlet Fitting GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 3/8" IPS Female Inlet 9

Miscellaneous Items Vacuum Breakers 892-CP Atmospheric Vacuum Breaker 1/2" Female Inlet and Outlet ASSE 1001 NSF 61, Section 9 E22JKCP In-Line Vacuum Breaker Outlet 3/8" NPT Male Inlet Fits Spouts with 3/8" NPSM Female Outlet 3/8" NPT Female Outlet Foot Control 625-CP Combination Pedal Box Short Pedals NAIAD Self Closing Cartridge Two 1/2" NPT Female Back Inlets One 3/8" NPT Female Back Outlet 625-CP Single Water Pedal Box Short Pedal NAIAD Self Closing Cartridge 1/2" NPT Female Back Inlet One 1/2" NPT Female Top Outlet NSF 61, Section 9 Pure Water Fitting These fittings are for a wide variety of pure water laboratory applications. 869-BPVC Deck Mounted PVC Pure Water Fitting PVC Rigid Gooseneck Spout Integral Serrated Hose Nozzle 3 Arm PVC Handle 969-2CTF Deck Mounted Tin Lined Distilled Water Fitting GN2B - Rigid/Swing Gooseneck Spout with Tin Lining E7 - Removable Serrated Tin Lined Hose Nozzle 204 - Cross Handle with DI Index Button 10

Fume Hood Fittings Gas Control Valves 1322-AGVCP Front Loaded Valve for Straight Panels 204 - Cross Handle with Air, Gas and Vacuum Index Buttons 962-VOCP Remote Control Valve for Straight Panels 204 - Cross Handle with Cold Water Service Button 962-VOGAAGVCP Remote Control Valve for Angled Panels 204 - Cross Handle with Air, Gas and Vacuum Index Buttons 962-VOGAGVCP Remote Control Valve for Straight Panels 204 - Cross Handle with Air, Gas and Vacuum Index Buttons 962-VOGLESS216-28CP Remote Control Valve for Straight Panels 204 - Cross Handle Less Index Buttons Note: Specify type of color coded index buttons required. Fume Hood Fittings Cold Water Upper Assembly 980-GN2BE7CP Wall Mounted Remote Control Upper Assembly GN2B - Rigid/Swing Gooseneck Spout 957-003K - 3/8" NPT x 4 3/4" Inlet Shank - Required for Installation (Order Separately) 980-GN2BVBE7CP Wall Mounted Remote Control Upper Assembly GN2BVB - Rigid/Swing Vacuum Breaker Gooseneck Spout 957-003K - 3/8" NPT x 4 3/4" Inlet Shank Assembly Included 986-E7XTCP Wall Mounted Remote Control End Assembly E7XT - Removable Angled Serrated Hose Nozzle 979-001K - 3/8" NPT x 2 5/8" Inlet Shank with Locknut & Washer 3/8" IPS Male Inlet 11

Fume Hood Fittings Water Control Valves 1322-LESS216-28CP Front Loaded Water Valve for Straight Panels 204 - Cross Handle Less Index Buttons 962-VOACP Remote Control Water Valve for Angled Panels 204 - Cross Handle with Cold Water Service Button Safety Emergency Shower 9100-HNF Horizontal Safety Drench Shower 9100-002 - 10" ABS Plastic Shower Head Stainless Steel Pull Rod 1" Ball Valve 9100-VNF Vertical Safety Drench Shower 9100-002 - 10" ABS Plastic Shower Head Stainless Steel Pull Rod 1" Ball Valve 9302-NF Deck Mounted Eye/Face/Body Drench Hose 90 High Impact ABS Plastic Feather-Flo Spray Head with Cover Stay Open Squeeze Handle 8' Rubber Hose 9303-NF Deck Mounted Eye/Face/Body Drench Hose 90 High Impact ABS Plastic Feather-Flo Spray Head with Cover Stay Open Squeeze Handle 8' Rubber Hose 12

Safety Eye/Face Wash 9004-LHNF Left Hand Deck Mounted Swing Forward Eye/Face Wash Dual High Impact ABS Plastic Feather-Flo Spray Heads with Covers 90 Push Paddle Handle Valve is Fully Open when Rotated 90 9004-RHNF Right Hand Deck Mounted Swing Forward Eye/Face Wash Dual High Impact ABS Plastic Soft-Flo Spray Heads with Covers 90 Push Paddle Handle Valve is Fully Open when Rotated 90 Safety Shower/Eye/Face Wash 9202-NF Combination Omni-Flo Eye/Face Wash and Safety Drench Shower 9100-002 - 10" ABS Plastic Shower Head Dual High Impact ABS Plastic Feather-Flo Spray Heads with Covers Stainless Steel Pull Rod 13

COUNTER TOP MATERIAL Type A Type B Type C Type D Description Basic Material Appearance Physical Properties Chemical Resistance Heat Resistance High-Pressure Laminate Wood particle core with plastic laminate surface Smooth finish, Satin black and colors Plastic laminate with molded wood core, banded edges; impact resistance fair; difficult to repair Poor Fair, should not be exposed to direct flame High-Pressure Lab Grade Laminate Wood particle core with acid resistant plastic laminate surface Smooth finish, Satin black Acid resistant plastic laminate with molded wood core, banded edges; impact resistance fair; difficult to repair Fair resistance to wide range of acids, solvents and alkalies Fair, should not be exposed to direct flame Epoxy Resin Phenolic Core Stainless Steel Epoxy resins and inert materials Low sheen finish, black Extremely hard Good resistance to wide range of acids, solvents and alkalies Very Good Thermosetting resins with wood fibers under high pressure and temperature Smooth finish, Satin black, white, gray with black edges Solid, homogenous core with a hard surface and exceptional impact resistance. Resists bacteria and fungus and can be disinfected. Good resistance to wide range of acids, solvents and alkalies Fair, should not be exposed to direct flame No. 304 stainless steel Smooth satin finish Heavy-gauge type No. 304; excellent abrasion resistance, impact and load bearing qualities, sound deadened Good resistance to wide range of acids; subject to attack by some Good, discolors at high temperatures Stain Resistance Good Good Very Good Very Good Very Good Moisture Resistance Use with Fume Hoods Suggested Use Areas Available Thickness Fair Fair Excellent Excellent Very Good Not Recommended Not Recommended Recommended Recommended Recommended General-purpose areas requiring limited hear resistance and no chemical resistance Areas requiring limited hear resistance and no chemical resistance All areas, especially chemical research, and petroleum labs; areas requiring chemical and heat resistance 1 ¼ 1 ¼ ¾, 1 and 1 ¼ All areas, especially pharmaceutical, cosmetic, electronic and food production, areas requiring chemical resistance 1 Clean rooms; constant temperature rooms; high-moisture areas; sterile areas; wash-up areas; autopsy areas; areas where radioactive materials are used; areas subject to fire and abrasion 14

Drop-in Epoxy Sinks Item Length Width Depth Drain L-5 14 10 6 END L-5C 14 10 6 CTR L-10 16 8 7 END L-13 12 8 6 CTR L-15 16 12 8 END L-15C 16 12 8 CTR L-20 16 16 7-1/2 COR L-22 6-1/2 6 CTR L-25 15 8 COR L-30 15 11 COR L-33E 21 17 10 END L-50C 24 16 8 CTR L-53 24-1/2-7/16 16-3/4 END L-55 25 15 10 COR L-59 28 15 12 END L-45 20-1/2 15-1/2 11 COR L-58 29-3/4 14-3/8 6 CTR L-73 30 16 COR ADAL-5 14 10 4-7/8 COR ADAL-25 15 4-7/8 COR ADAL-55 25 15 4-7/8 COR ADAL-75 48 19 4-7/8 COR Sink Accessories P-CS4R P-CS12 P-S03 P-OF 3x6 cupsink 3x9 cupsink Sink outlet 6, 8, 10 over flow 15

Polypropylene Sinks Part No. Length Width Depth Drain Location W314-000 W31431-000 W31452-000 W31454-000 W31462-000 W31464-000 W31470-000 W31480-000 W31485-000 W31491-000 12 14 16 16 21 24 25 28 8 10 8 16 15 15 16 15 20 8 6 7 8 8 10 10 8 10 12 Center Corner End Corner Corner Corner Corner Corner Corner Corner Part No. Length Width Depth Drain Location W31220-000 W31263-000 W31264-000 12 12 15 15 8 12 10 Corner Corner Corner SPECIFY - FLUSH OR UNDER COUNTER RIM FOR DOUBLE BOWL SINK Sink Accessories Part No. W31596-150 W31596-200 W31597-150 W31597-200 Description STRAINER 1-1/2 STRAINER 2 PUG 1-1/2 PUG 2 Part No. W39024-150 W39026-150 W39027-150 W39030-150 Description 3 x 9-1.5 thread black 3 x 6 wall mount, vertical 3 x 6 wall mount, horizontal 3 x 6 Deep oval black 16

Stainless Steel Sinks Single Bowl Part No. O.D. I.D. Depth Gauge S-1717-A-GR S-1719-A-GR S-1922-A-GR S-1925-A-GR 17 X 17 17 X 19 19 X 22 19 X 25 14 X 14 16 X 16 16 X 19 16 X 22 7 ½ 7 ½ 7 ½ 7 ½ SX-1717-A-GR SX-1719-A-GR SX-1922-A-GR SX-1925-A-GR 17 X 17 17 X 19 19 X 22 19 X 25 Double Bowl 14 X 14 16 X 16 16 X 19 16 X 22 10 ½ 10 ½ 10 ½ 10 ½ Part No. O.D. I.D. Depth Gauge D-1529-A-GR D-1937-A-GR D-1943-A-GR 15 X 29 19 X 37 19 X 43 12 X 12 16 X 16 16 X 19 7 ½ 7 ½ 7 ½ DX-1529-A-GR DX-1937-A-GR DX-1943-A-GR Note: Sinks include strainers 15 X 29 19 X 37 19 X 43 12 X 12 16 X 16 16 X 19 9 10 ½ 10 ½ 17

Pegboards-Trespa Especially resistant to abusive chemicals, Trespa pegboards mount on wall above sink or drainboard. Board is 1" thick Trespa. Pegs are white polyethylene, 5" long x 3/8" diameter. Pegs are removable and molded to fit into drilled holes on board. Cat No. No. of Pegs Width x Height TP-2430 TP-3030 21 27 24" x 30" 30" x 30" Specific custom sizes quoted on request. Custom board pegs are 2 prong, 3/8" diameter polyethylene with 45º angled pegs. Available in 5", 6-1/2" and 8" lengths; choice of black or white. Stainless steel drip troughs are available Pegboards-Stainless Steel Stainless steel pegboards are constructed with type 304 stainless. They are highly resistant to chemicals. These pegboards can be mounted on wall above sink or drainboard. Pegs are white polyethylene. Cat No. No. of Pegs Width x Height V2430 V3030 B2430 B3030 B3630 32 50 32 50 50 V series pegboards come with a built in trough and draintube. 24" x 30" 30" x 30" 24 x 30 30 x 30 36 x 30 Balance Tables Fabricated of durable 2-1/2" thick epoxy resin, These balance tables feature superior load bearing capability and the rigidity necessary to support sensitive calibrated instrumentation. Standard tables are 24"D x 35"W x 31"H (375 lb. net wt.). Custom tables can also be fabricated to specified dimensions.

Electrical Services (The bottoms of Pedestal Boxes are Tapped for ¾ NPS conduit nipple) Single Face Double Face Single Face Double Face Flush Recept. 1-Gang 1-Gang 2-Gang 2-Gang 1-Gang 2-Gang BOX ONLY #940 #941 #942 #943 #944 #945 #940-A #941-A #942-A #943-A #944-A #945-A 15 AMP 125 V 3-wire Polarized 15 AMP 125 V 3-wire Polarized 5 AMP 250 V 3-wire Polarized 5 AMP 250 V 3-wire Polarized 5 AMP 250 V 3-wire Polarized Twist Lock 20 AMP 250 V 3-wire Polarized 20 AMP 250 V 4-wire Polarized 20 AMP 250 V 3-wire Polarized Twist Lock 20 AMP 250 V 4-wire Polarized Twist Lock #940-B #941-B #942-B #943-B #944-B #945-B #940-C #941-C #942-C #943-C #944-C #945-C #940-D #941-D #942-D #943-D #944-D #945-D #940-E #941-E #942-E #943-E #944-E #945-E #940-F #941-F #942-F #943-F #944-F #945-F #940-G #941-G #942-G #943-G #944-G #945-G #940-H #941-H #942-H #943-H #944-H #945-H #940-J #941-J #942-J #943-J #944-J #945-J #942-K #943-K #945-K 30 AMP 250 V 3-wire Polarized NOTE: Standard Pedestals are Polished Aluminum. Plates are Stainless Steel. 19

Toggle Switches and Pilot Lights Part No. Description Rating #400FV Toggle Switch Single Pole 10 AMPS. 125V #405FV Toggle Switch Double Pole 20 AMPS. 250V #410FV Toggle Switch and Pilot Light 10 AMPS. 125V #415FV Toggle Switch and Pilot Light 10 AMPS. 250V #535FV Toggle Switch and Duplex Outlet 10 AMPS. 125V #540FV Kwik Switch Pressure acting, button glows when switch is on. 15 AMPS. 120-277V 20

Distributed By: Multi-Lab, Inc. 784 174th Avenue Spring Lake, MI 49456 Ph: 616-846-6990 Fax: 616-846-6996 www.multilab.net Multilab, LLC by Keur Products: Multi-Lab Laboratory Casework, Heritage Fume Hoods, Mobile Bench Systems, Browne-Morse Laboratory Furniture Copyright 2015 Multi-Lab, Inc. Contents property of Multi-Lab, Inc. May not be reproduced without permission. This document does not knowingly contain any untrue materials and products or omission to cause misleading information or guidelines.