Operator s/parts Manual

Operator s/parts Manual 3-Point Solid Stand Drills Pull Hitch Package Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the operator s manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show items not supplied with standard product. 13276 Copyright 1998 Printed 10/3/08 124-024M

General Information General Information Important Notice Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either express or implied, while every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product at all times in the future. Printed in the United States of America. For your convenience, record your Model Number and the Date Purchased in the spaces provided below. Have this information before you when calling Great Plains Manufacturing, Inc. This Operator s Manual applies to Pull Hitches for: Part # Description Drill 124-025A Pull Hitch Package 12 & 15 3-Point Drill 124-027A Pull Hitch Package 20 3-Point Drill Owner s Information Name: Address City State Zip Phone Name of Dealership Dealer s Name Address City State Zip Phone Model Number Date Purchased Using this Manual For your safety and to help in developing a better understanding of your equipment we highly recommend that you read the operator sections of this manual. Reading these sections not only provides valuable training but also familiarizes you with helpful information and its location. The parts sections are for reference only and don t require cover to cover reading. After reviewing the manuals store them in a dry, easily accessible location for your future reference. 3-Point Solid Stand Drills Pull Hitch Package 124-024M Great Plains Mfg., Inc. 10/3/08

Introduction Table of Contents Introduction............................... 1 General Operation & Repair.................. 2 Section 1 Safety Rules...................... 2 Section 2 General Information................. 2 Before You Start......................... 2 3-Point Pull Package Attachment............. 2 Tire Inflation Chart........................ 3 Section 3 Operations........................ 4 3-Point Pull Package Operation.............. 4 Transporting............................. 4 Section 4 Maintenance & Lubrication........... 4 Axle Bearings............................ 4 Parts Book................................. 6 Frame Assembly.......................... 6 Hub and Tire Assembly.................... 8 Introduction This manual has been prepared to instruct you in the safe and efficient operation of your Pull Hitch Package. Read and follow all instructions and safety precautions carefully. The parts on your Pull Hitch Package have been specially designed and should only be replaced with genuine Great Plains parts. Therefore, should your Pull Hitch Package require replacement parts go to your Great Plains Dealer. The right hand and left hand as used throughout this manual is determined by facing in the direction the machine will travel when in use unless otherwise stated. The SAFETY ALERT SYMBOL indicates that there is a potential hazard to personal safety involved and extra safety precautions must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment; hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment. Watch for the following safety notations throughout your Operators Manual and/or on your Great Plains Drill:!! DANGER! Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations.! WARNING! Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.! CAUTION! Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. NOTE: Indicates a special point of information which requires your attention. IMPORTANT: Indicates additional information is provided that is necessary to prevent possible damage to the equipment only. 10/3/08 Great Plains Mfg., Inc. 3-Point Solid Stand Drills Pull Hitch Package 124-024M 1

Section 1 Safety Rules Section 1 Safety Rules Most accidents are the result of negligence and carelessness, usually caused by failure of the operator to follow simple but necessary safety precautions. The following safety precautions are suggested to help prevent such accidents. The safe operation of any machinery is a big concern to consumers and manufacturers. Your Pull Hitch Package have been designed with many builtin safety features. However, no one should operate this product before carefully reading this Operators Manual. General Operation & Repair 1. NEVER permit anyone near machinery while in operation. 2. NEVER exceed 20 MPH. Excessive speed can cause damage to drill and pull hitch package. 3. Reduce speed of the tractor when transporting over uneven or rough terrain. Avoid all chuck holes and washboard areas in roads. 4. Reduce speed of the tractor when transporting over hills or steep slopes. 5. DO NOT lubricate, adjust or repair the drill while it is in operation. 6. When in transport, use accessory lights and devices for adequate warning to operators of other vehicles and use safety hitch chain. Comply with all Federal, State and Local laws when traveling on public roads. 7. Use "Slow Moving Vehicle" emblem for warning vehicles approaching from the rear. 8. DO NOT permit smoking, sparks, or an open flame where combustible lubricants or liquids are being used.! 9. CAUTION! Escaping fluid under pressure can have sufficient force to penetrate the skin. Check all hydraulic lines and hoses before applying pressure. Fluid escaping from a very small hole can be almost invisible. Use paper or cardboard, not body parts, to check for suspected leaks. If injured, seek medical assistance from a doctor that is familiar with this kind of injury. Foreign fluids in the tissue must be surgically removed within a few hours or gangrene will result. Section 2 General Information Before You Start Read and understand the owners manual for your Pull Hitch Package. A basic understanding of how the kit works will aid in the assembly, setup and operation of your drill. Before attempting to assemble the Pull Hitch Package, use the following as a checklist. Having all the needed parts and equipment readily at hand will speed up your assembly task and will make the job as safe as possible. 1. Check for all kit components and hardware. 2. If a bolt, pin or other component has been removed, or if you are unsure about where it is used, refer to the parts section of this manual to identify it. 3-Point Pull Package Attachment The Great Plains Pull Package is available to turn your 3-Point drill into a pull-type unit. It comes equipped with single wheels for a 12 and 15 drill and with dual wheels for a 20 drill. Tire Inflation Chart Tire Size Inflation PSI 7.50 x 20" 4-Ply Drill Rib 28 9.0 x 22.5 10-Ply Highway Service 70 70 9.0 x 24" 8-Ply Rib Implement 40 9.5L x 15" 6-Ply Rib Implement 32 9.5L x 15" 8-Ply Rib Implement 44 9.5L x 15" 12-Ply Rib Implement 60 Tire Size Inflation PSI 11L x 15" 6-Ply Rib Implement 28 11L x 15" 12-Ply Rib Implement 52 12.5L x 15" 8-Ply Rib Implement 36 12.5L x 15" 10-Ply Rib Implement 44 16.5L x 16.1" 10-Ply Rib Implement 36 41 x 15" x 18-22-Ply Rib Implement 44 2 3-Point Solid Stand Drills Pull Hitch Package 124-024M Great Plains Mfg., Inc. 10/3/08

Section 2 General Information Torque Values Chart Bolt Head Identification Bolt Head Identification Bolt Size (Inches) Grade 2 Grade 5 Grade 8 Bolt Size (Metric) 5.8 8.8 10.9 Class 5.8 Class 8.8 Class 10.9 in-tpi 1 N m 2 ft-lb 3 N m ft-lb N m ft-lb mm x pitch 4 N m ft-lb N m ft-lb N m ft-lb 1/4" - 20 7.4 5.6 11 8 16 12 M 5 X 0.8 4 3 6 5 9 7 1/4" - 28 8.5 6 13 10 18 14 M 6 X 1 7 5 11 8 15 11 5/16" - 18 15 11 24 17 33 25 M 8 X 1.25 17 12 26 19 36 27 5/16" - 24 17 13 26 19 37 27 M 8 X 1 18 13 28 21 39 29 3/8" - 16 27 20 42 31 59 44 M10 X 1.5 33 24 52 39 72 53 3/8" - 24 31 22 47 35 67 49 M10 X 0.75 39 29 61 45 85 62 7/16" - 14 43 32 67 49 95 70 M12 X 1.75 58 42 91 67 125 93 7/16" - 20 49 36 75 55 105 78 M12 X 1.5 60 44 95 70 130 97 1/2" - 13 66 49 105 76 145 105 M12 X 1 90 66 105 77 145 105 1/2" - 20 75 55 115 85 165 120 M14 X 2 92 68 145 105 200 150 9/16" - 12 95 70 150 110 210 155 M14 X 1.5 99 73 155 115 215 160 9/16" - 18 105 79 165 120 235 170 M16 X 2 145 105 225 165 315 230 5/8" - 11 130 97 205 150 285 210 M16 X 1.5 155 115 240 180 335 245 5/8" - 18 150 110 230 170 325 240 M18 X 2.5 195 145 310 230 405 300 3/4" - 10 235 170 360 265 510 375 M18 X 1.5 220 165 350 260 485 355 3/4" - 16 260 190 405 295 570 420 M20 X 2.5 280 205 440 325 610 450 7/8" - 9 225 165 585 430 820 605 M20 X 1.5 310 230 650 480 900 665 7/8" - 14 250 185 640 475 905 670 M24 X 3 480 355 760 560 1050 780 1" - 8 340 250 875 645 1230 910 M24 X 2 525 390 830 610 1150 845 1" - 12 370 275 955 705 1350 995 M30 X 3.5 960 705 1510 1120 2100 1550 1-1/8" - 7 480 355 1080 795 1750 1290 M30 X 2 1060 785 1680 1240 2320 1710 1 1/8" - 12 540 395 1210 890 1960 1440 M36 X 3.5 1730 1270 2650 1950 3660 2700 1 1/4" - 7 680 500 1520 1120 2460 1820 M36 X 2 1880 1380 2960 2190 4100 3220 1 1/4" - 12 750 555 1680 1240 2730 2010 1 3/8" - 6 890 655 1990 1470 3230 2380 1 in-tpi = bolt size in inches-threads per inch 1 3/8" - 12 1010 745 2270 1670 3680 2710 2 N m = newton-meters 1 1/2" - 6 1180 870 2640 1950 4290 3160 3 ft-lb= foot pounds 1 1/2" - 12 1330 980 2970 2190 4820 3560 4 mm x pitch = millimeters x thread pitch 10/3/08 Great Plains Mfg., Inc. 3-Point Solid Stand Drills Pull Hitch Package 124-024M 3

Section 3 Operations Section 3 Operations 3-Point Pull Package Operation The Pull Package attaches to the drill with a quick coupling hitch and comes equipped with a telescoping top link or a threaded top link. The threaded top link is used to adjust your drill in order to allow it to run horizontal to the ground when drilling. The telescoping top link will allow your drill to float front to back in order to follow the ground contour. When hooking up to drill, be sure that the quick hitches are latched securely. Note: When in field position, transport wheels should be raised off the ground to insure proper operation of your drill. Transporting Your pull hitch comes equipped with a 90 degree turn valve located at the hydraulic cylinder rod end port, allowing you to turn the hydraulic oil off from your lift cylinder when in raised position for transporting.! CAUTION! This drill with hitch package should never be pulled faster than 20 miles per hour! Section 4 Maintenance & Lubrication 1. Be sure tires have the proper inflation. Refer to "Tire Inflation Chart" on page 2. 2. Grease axle bearings every 20-25 hours of operation 20 Axle Bearings 13342 Type of Lubrication: Universal Multipurpose Grease 4 3-Point Solid Stand Drills Pull Hitch Package 124-024M Great Plains Mfg., Inc. 10/3/08

Notes: 10/3/08 Great Plains Mfg., Inc. 3-Point Solid Stand Drills Pull Hitch Package 124-024M 5

Section 5 Frame Assembly 13274 6 3-Point Solid Stand Drills Pull Hitch Package 124-024M Great Plains Mfg., Inc. 10/3/08

Section 5 Frame Assembly Ref. Part No. Part Description 1. 124-002H Axle Weldment 12, 14 & 15 2. 803-027C Nut, Hex 3/4"-10 3. 804-023C Washer, Lock 3/4" 4. 802-024C Bolt, Hex 3/8"-16 x 3" Long 5. 812-005C Casting, Main Axle Bearing 6. 803-021C Nut, Hex 5/8"-11 7. 804-022C Washer, Lock 5/8" 8. 802-060C Bolt, Hex 5/8"-11 x 4" Long 9. 126-001K Axle Bearing Assembly. Includes 2Each Of Item 21; And, 2 Each Of Items 4, 5, 10, & 11. 10. 804-013C Washer, Lock 3/8" 11. 803-014C Nut, Hex 3/8"-16 12. 124-020H Frame 13. 124-018H Pin, Lock 14. 124-105D Pin, Lock Pivot 15. 124-017H Spring Lever Weldment 16. 807-007C Spring, Lever 17. 805-037C Pin, Spiral 1/2" x 2 1/2" Long 18. 802-065C Bolt, Hex 3/4"-10 x 2 1/4" Long 19. 805-044C Pin, Roll 1/4" x 1" Long 20. 124-016H Lock Handle 21. 800-001C Zerk, Straight 1/4"-28 22. 805-088C Pin, Hair Cotter 3/16" 23. 805-090C Pin, Clevis 1" x 3 3/16" Long 24. 810-001C Hydraulic Cylinder 4" x 14" Stroke 25. 811-213C Hydraulic Fitting 1/2" MNPT x 3/8" MNPT 90 26. 811-215C Hydraulic Hose 3/8" x 144" Long 27. 811-301C Hydraulic Fitting 1/2" MNPT x 3/8 FNPT 90 28. 124-014H Connect Tube - Upper 29. 124-015H Connect Tube 30. 803-032C Nut, Jam 1 1/4"-7 31. 111-002H Adjustment Clevis 32. 805-004C Pin, Upper Link With Clips 33. 124-019K Upper Assembly. Includes 1 Each Of Items 28 Through 32. 34. 810-076C Valve, Ball 3/8" NPT x 90 35. 890-182C Safety Chain 10,000 Pound Capacity 36. 124-116D Safety Chain Washer 37. 802-181C Bolt, Hex 1"-8 x 3" Long 38. 804-027C Washer, Lock 1" 39. 803-031C Nut, Hex 1"-8 40. 818-019C DECAL WARNING NEG TONGUE WT 41. 805-016C PIN COTTER 3/16 X 1 1/4 PLT 42. 804-029C WASHER FLAT 1 SAE 10/3/08 Great Plains Mfg., Inc. 3-Point Solid Stand Drills Pull Hitch Package 124-024M 7

Section 5 Hub & Tire Assembly 13275 8 3-Point Solid Stand Drills Pull Hitch Package 124-024M Great Plains Mfg., Inc. 10/3/08

Section 5 Hub & Tire Assembly Ref. Part No. Part Description 1. 201-008D 5 BOLT HUB SPINDLE 2. 802-099C HHCS 1/2-13X3 1/4 GR5 3. 804-015C WASHER LOCK SPRING 1/2 PLT 4. 803-020C NUT HEX 1/2-13 PLT 5. 816-017C HUB SEAL 5 BOLT 6. 822-034C BEARING CONE LM-48548 7. 201-009D 6 BOLT SINGLE ENDED SPINDLE 8. 802-135C HUB STUD 1/2-20X1 5/8 GR5 9. ➁➌ 815-082C HUB 6 BOLT 4 5/8 PILOT W/ CUPS 8/1/1996 12/31/1997. If replacing old hub order bolts P/N 802-399C item 25. 9 ➋ 200-037V REPLACED BY 815-082C 1991 8/1/96. 9 ➊ 200-006S REPL BY 200-037V 10. 124-118D 5 BOLT WHEEL REINFORCING RING 11. ➋ 200-036V 5 BOLT WHEEL HUB & CUP ASSY 11 ➊ 200-005S REPL BY 200-036V 12. 822-021C BEARING CONE LM-67048 13. 804-055C WASHER SPINDLE - 7/8 14. 200-001D HUB GREASE CAP 15. 109-058K GAUGE WHEEL & TIRE - TUBELESS Includes items 16, 17 and 18. 16. 814-026C TIRE 9.5L X 15 6 PLY RIB IMP 17. 814-005C WHEEL 6 X 15 X 5 BOLT 18. 816-035C VALVE STEM TR415X.625X1 1/4 LG 19. 803-017C NUT LUG 1/2-20X90DEG PLT 13/16 20. 102-006K TIRE/WHEEL ASSY 9.5LX15 12 PLY Includes items 18, 21 and 22. 21. 814-009C TIRE 9.5L X 15-12 PLY-TUBELESS 22. 814-008C WHEEL 8 X 15 X 6 BOLT 23. 152-215D WHEEL REINFORCING RING 24. ➋ 815-077C HUB 6 BOLT 4 5/8 PILOT 3600 LB Includes items 9, 12, 14, 26, 27, 28 and 29. 24 ➊ 200-001S REPLACED BY 815-077C Includes items 9, 12, 14, 25, 26 and 27. 25. ➀➋ 802-399C HFS 1/2-20X1 1/2 GR5 8/1/1996 12/31/1997. 25 ➊ 802-104C BOLT WHEEL 1/2-20X1 90-DEG 1991 8/1/96. 26. 822-018C BEARING CONE LM-29749 27. 816-011C SEAL 2.56X1.625X.438 CR16289 28. 803-029C NUT HEX SLOTTED 7/8-14 PLT 29. ➋ 805-246C PIN COTTER 5/32 X 1 3/4 LG 29 ➊ 805-016C PIN COTTER 3/16 X 1 1/4 PLT Replaced by 805-246C. 30. 124-021H AXLE ASSEMBLY 31. 822-020C BEARING CUP LM-67010 32. 822-019C BEARING CUP LM-29710 33. 822-033C BEARING CUP LM-48510 34. 200-004S 5 BOLT HUB & SPINDLE PACKAGE Includes items 1, 5, 6, 8, 11, 12, 13, 14, 19, 28 and 29 10/3/08 Great Plains Mfg., Inc. 3-Point Solid Stand Drills Pull Hitch Package 124-024M 9

Great Plains Manufacturing, Inc. Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA