OSIM uastro2
OS-820 uastro2 Thank you for purchasing the OSIM uastro2. Before you start using the uastro2, please read the operation manual thoroughly for the correct methods of usage, especially taking note of the section on safety. Call our Delivery Support Team at 866-336-3199 if you have questions during delivery, or damage at time of delivery. This manual should be kept on hand for easy reference. It is your guide to safe and efficient operation. Table of Contents Cautions and warnings...1 Names of parts and functions...6 Features and effectiveness...9 Preparation before use...10 Massage programs and selections...15 Product care and storage...19 Troubleshooting...20 Specifications...22 Warranty...25
IMPORTANT SAFETY INSTRUCTIONS When using the massage chair, basic precautions should always be followed, including the following: Read all instructions before using this massage chair. DANGER To reduce the risk of electric shock: 1. Always unplug this massage chair from the electrical outlet immediately after using and before cleaning. 2. Never use pins or other metallic fasteners with this appliance. 3. Carefully examine the covering before each use. Call for service if the covering shows any sign of deterioration, such as blistering, peeling or cracking. 4. Keep dry Do not operate in a wet or moist condition. WARNING To reduce the risk of burns, fire, electric shock or injury to persons: 1. READ ALL INSTRUCTIONS BEFORE USING. 2. A massage chair should never be left unattended when plugged in. Unplug from the outlet when it is not in use and before putting on or taking off parts. 3. Close supervision is necessary when this massage chair is used by or near children or disabled persons. Keep children away from reclining backrest and extended leg rest. 4. Use this massage chair only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 5. Never operate this massage chair if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact Brookstone Customer Service at 866-336-3199. 6. Keep the cord away from heated surfaces. 7. Never operate the massage chair with the air openings blocked. Keep the air openings free of lint, hair, and the like. 8. Never drop or insert any object into any opening. 9. Do not use outdoors. 10. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 11. To disconnect, turn all controls to the off position, then remove the plug from the outlet. 12. Do not stand on or in the massage chair. Use only while seated. 13. The product is not intended for use by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. 1
IMPORTANT SAFETY INSTRUCTIONS (continued) 14. Children should be supervised to ensure that they do not play with the product. 15. Use heated surfaces carefully. May cause serious burns. Do not use over insensitive skin areas or in the presence of poor circulation. The unattended use of heat by children or disabled persons may be dangerous. 16. Temperatures sufficiently high to cause burns may occur regardless of the control setting. Do not use on an infant or invalid or on a sleeping or unconscious person. Check the skin in contact with the heated area of the appliance frequently to reduce the risk of blistering. 17. Burns may result from improper use. 18. Do not crush avoid sharp folds. 19. Keep children away from extended foot support (or other similar parts). 20. Do not wet Do not use pins. 21. Never remove cover. 22. Connect this appliance to a properly grounded outlet only. See Grounding Instructions. SAVE THESE INSTRUCTIONS This massage chair is intended for household use only. 1. Usage Environment Do not use the uastro2 in an excessively humid or dusty environment as this may result in malfunction or electric shock. Do not use the uastro2 in a room with a temperature of 104 F or higher. Do not expose the uastro2 to heaters, stoves or direct sunlight. Place and use the uastro2 on an even, non-slip floor. The uastro2 is designed for home use and not for commercial purposes. Caution The uastro2 is to be used indoors only. If you use the uastro2 in a cold room, do not increase the room temperature abruptly. It is recommended that you increase the temperature gradually to a normal level. If the uastro2 is stored in a cold place and is being brought into a warm environment, it is advisable to wait one hour before use. This is because its performance may not be at optimum level, as there may be water droplets on the mechanical parts due to condensation. Using the uastro2 under such conditions may result in malfunction. 2
Safety 2. Safety Precautions To ensure safe and correct use of the uastro2, do not operate it without reading this operation manual carefully. Do not use the uastro2 when the upholstery or seat is removed. This may cause injury or malfunction. Do not use the uastro2 in combination with other therapeutic equipment or electric blanket, etc., as this may result in ineffectiveness or injury. Do not use the uastro2 an hour before or after eating as this may have adverse effects on the user. Do not allow children or pets to play around the uastro2, e.g., behind the backrest, under the seat or leg rest of the uastro2. This may result in injury. Do not rest or place heavy objects on the armrests, leg rest or backrest as this may result in malfunction or injury. Do not use the uastro2 when your body is wet. Do not operate the uastro2 with wet hands. It is not recommended to use the massage for more than 15 minutes. Do not perform continuous massage on the same spot of your body for more than 5 minutes at a time as this may result in excessive stimulation and may have adverse effects. Do not insert your hand or foot along the paths of the massage rollers during use as this may cause injury. Stop operation immediately if you experience any discomfort. This product is not intended for self-treatment of conditions that should be managed by a qualified health care provider. People on medication or with medical conditions, please consult your doctor before use. Please do not use the product if you are not feeling well. Remove all scarves, neckties, necklaces and jewelry before using the massager. 3. People with Medical Conditions Consult your doctor before use if you: are under medical rest as ordered by a doctor. have spinal disorders, an abnormal spinal condition or have suffered a spinal injury. have back problems. have diabetes, osteoporosis or sensory impairment. have joint dysfunction. have a pacemaker or other electronic medical devices. may be pregnant. have phlebitis or thrombosis. have an increased risk for blood clots. had recent surgery. have surgical pins, screws, or anything mechanical implanted in your body. 3
Safety Caution The uastro2 is not intended for use by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the uastro2 by a person responsible for their safety. Children should be supervised to ensure that they do not play with the uastro2. Avoid using the uastro2 under the influence of alcohol. Do not apply massage rollers directly on the head, elbow or knee joints, torso or abdomen. If your legs or feet slip off the leg rest during massage, do not force them back in as this may result in injury. Remove the power plug from the electrical outlet immediately should liquid be accidentally spilled onto the uastro2. Do not use wet hands to connect or disconnect the power plug from the electrical outlet. Do not tamper with the power cord or use the uastro2 with a damaged cord as this may result in malfunction and electric shock. 4. Instances When the uastro2 Should Not Be Used In the following events, please switch off the main power switch immediately and disconnect the power cord from the electrical outlet: If water is accidentally spilled onto the uastro2. This may result in electric shock or malfunction. If the fabric of the backrest is torn and the internal components are exposed. If pain or discomfort is felt during massage, stop operation immediately and consult your doctor. If you detect any malfunction or any other abnormal condition during operation. If there is a power failure. Injury may occur when power is restored unexpectedly. If there is lightning. 5. Assembly and Repair of the uastro2 Do not disassemble the backrest cover of the uastro2. Touching the internal components may result in malfunction or electric shock. The uastro2 must only be professionally serviced or repaired. Do not attempt to disassemble or repair the uastro2 yourself. 4
Safety 6. Things to Note About the Power Plug and Cord Check that the Alternating Current (AC) voltage corresponds with the specifications indicated for the uastro2. Do not connect or disconnect the power plug from the electrical outlet with wet hands. This may result in malfunction or electric shock. When disconnecting the power plug, pull it by holding the plug, not the cord. Although operation will be stopped automatically by the Auto-Timer function, always remember to switch off the main power switch after use. Do not place the power cord under the uastro2 or any other heavy objects. Do not wind the power cord around the uastro2 as this may damage the cord and result in a fire or electric shock. Do not operate the uastro2 with a damaged cord or extension cord. Do not use the uastro2 if the electrical outlet is loose. If the power cord is damaged, it should be replaced by a qualified technician. 7. Grounding Instructions This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This product is for use on a nominal 120V circuit and has a grounding plug that looks like the plug illustrated below. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. 5
Names of parts and functions 1 6 2 3 7 8 4 5 9 12 13 10 11 14 15 1. Headrest 2. Shoulder massage unit 3. Arm massage unit 4. Seat 5. Leg rest 6. Backrest pad 7. Backrest 8. Armrests 9. Backrest cover 10. AC plug* 11. AC cord 12. Controller 13. Controller side pocket 14. Casters 15. Main power switch *Parts may differ from those shown in illustration. 6
Names of parts and functions Controller Power button Power ON/OFF. Switching off the power while in operation will cause the rollers to return to their storage position. Pause button To pause massage program. Safety stop button To stop chair operation immediately. Rollers will not return to storage position. LCD display To display information on timer, massage intensity, speed and roller position, etc. Automatic massage program buttons Refer to page 15 for details. Chair recline buttons To raise or recline the backrest and leg rest. Leg Rest up / down buttons To raise or lower the leg rest. Seat Return button To stop all functions. Chair will return to default position. Zero Gravity button To recline chair to Zero Gravity angle. Roller adjustment button To adjust the roller position after initialization during automatic, localized and focus mode programs. Intensity button To adjust the massage strength and air bag massage intensity. Timer button To select variable countdown selection. Heat button To activate heater at lumbar area. 7
Names of parts and functions Controller (Inner Panel) Localized area massage program buttons Refer to page 16 for details. Seat/Hand vibration button Refer to page 17 for details. Manual selection massage program buttons Refer to page 16 for details. Massage fine adjustment button Focus To focus massage at desired position. Roller width To adjust the width of the rollers. By default, the roller width is set at Mid. Refer to page 17 for details. Caution Caution for damage prevention Do not sit, step or place heavy objects on the controller. Do not drop the controller. It is recommended that the controller unit be placed in the controller side pocket when not in use. Do not exert excessive force on the controller. Do not handle the controller with wet hands. Do not operate the controller using sharp-edged or hard objects. It may result in damage. 8
Features and effectiveness Features Full-body massage with relaxing back, seat and foot massage. 8 automatic massage programs (Full Body, Full Air, Relax, Energize, Swedish, Rejuvenate, Stretch and Quick). 4 manual massage programs (Kneading, Roller, Rolling and Tapping) allow user to customise desired massage. Air-bag massage programs (Neck & Shoulder, Arm, Seat & Lumbar (Air), Foot Air and Roller) with 5 levels of intensity adjustment. 4 localized area programs (Neck & Shoulder, Arm, Seat & Lumbar (Air), Back & Lumbar, Foot Air & Roller) A deep massage, using a 4-roller system on the full body. Roller width adjustments during manual massage programs (Rolling and Tapping). Heat function at lumbar area. 1 touch Zero Gravity position button. Massage speed adjustments for Kneading and Tapping. Color LCD display to show massage progress and remaining massage time. 15 minutes auto timer. Casters located at the back of the chair to allow easy movement. Removable cushion pad at backrest for different massage intensities. Effectiveness Relieves muscle fatigue. Helps improve blood circulation. Relieves tired muscles. Relaxes stiff and aching muscles. Relieves muscle strain and tension. Helps relieve stress. Promotes relaxation. Helps relieve pressure on the lower back. 9
Preparation before use Setting up the uastro2 uastro2 is packed with its backrest reclined. The armrest unit is packed separately. Before use, ensure that the backrest is raised fully to its upright position. Placing the cushion pad Removable cushion pad is provided to achieve the type of massage you want. If you feel the massage is too light, remove the cushion pad. If you feel the massage is too strong, insert the cushion pad. Raise backrest to its upright position Backrest pad Velcro Cushion pad Backrest Unzip the zipper located at the top of the backrest pad near the seat. Disengage the Velcro located at the middle of the backrest pad to remove or insert the cushion pad. Align and engage the Velcro on the backrest pad to the Velcro on the backrest. Backrest pad Velcro Zipper 10
Preparation before use Positioning the uastro2 Ensure that there is an allowance of more than 45 behind the uastro2 and more than 20 in front of the uastro2 to allow the backrest to recline and the leg rest to extend without obstruction during operation. Power On/Off Connect the power plug to the electrical outlet. Turn on/off the main power switch located at the back of the uastro2 to power on/off the uastro2. 45 20 Caution Ensure the power cord is not placed under the uastro2. Ensure all switches are turned OFF (including the main power switch) before connecting the power plug to an electrical outlet. Caution It is recommended that a carpet be placed under the uastro2 to prevent scratching of the flooring and to reduce noise level during operation. As the uastro2 is heavy, please exercise extra care not to damage the floor surfaces when positioning it. Maintain a minimum distance of 3 feet from AV devices such as a television or radio to prevent signal interference. Use the uastro2 only when it is placed on an even, flat surface. Checking the backrest pad Lift the backrest upholstery to ensure that there are no holes or tears on the backrest pad. Caution Always check to ensure that there are no holes or tears on the backrest pad. Stop using the uastro2 immediately if you find even the slightest tear. Unplug the uastro2 and contact Brookstone Customer Service at 866-336-3199. 11
Preparation before use Moving the uastro2 There are 2 methods to move the chair. Moving method (1) Raise the backrest and retract the leg rest fully. Turn the main power switch off and unplug the power plug from the electrical outlet. Lift up the leg rest unit and move the chair as shown in the diagram below. Moving method (2) Raise the backrest and retract the leg rest fully. Turn the main power switch off and unplug the power plug from the electrical outlet. Carry the chair by holding the upper part of the backrest and the corners of the side panel. Caution Castors Do not move the uastro2 when there is someone sitting on it. This will cause the uastro2 to tip over resulting in accident and injuries. 12
Preparation before use Sitting on the uastro2 The rollers are usually stored in the upper part of the backrest. This position is known as the storage position. If the rollers are not in the storage position, simply reset by pressing the power button on the controller before sitting on the uastro2. Caution Do not sit down on the chair with the leg rest raised. Any sudden heavy weight on the leg rest could cause damage to the mechanism, or it may result in accident or injury if the chair tips over. Ensure that the backrest returns to its most upright position before sitting down on the chair, then recline it according to your preference. How to recline the backrest To recline the backrest Push and hold the [ ] (Recline button) until the backrest is at your desired angle. Raising and lowering the leg rest The leg rest can be raised for usage or lowered for storage. To raise the leg rest Press and hold the leg rest button [ ] until the leg rest is at the desired angle. To lower the leg rest Press and hold the leg rest button [ ] until the leg rest is at the desired angle. Leg rest extension and retraction Raise the leg rest until your legs are placed at natural position. Stretch your legs to a comfortable position. The leg rest will extend or retract and stop at an appropriate position. To use the heat function Press [ ] button to turn on/off the heat function. To raise the backrest Push and hold the [ ] (Incline button) until the backrest is at your desired angle. 13
Preparation before use Caution The uastro2 is fitted with a safety function in the backrest and leg rest units, which will stop the backrest or leg rest from descending should there be any obstruction below it. Do not place fingers or objects in the gap between the seat and the backrest/leg rest. 14
Massage programs and selections Automatic massage programs You may select any automatic massage program that best suits your needs by pressing the respective automatic program buttons on the controller. 1 Press [ ] button to switch on the controller. uastro2 will recline to its ready position and the LCD on the controller will light up. If no selection is made after 5 minutes, the chair will go into idle mode and the LCD light will go off. (Ready position: Leg rest will raise slightly and backrest will recline slightly.) Note Keep each massage session to no longer than 15 minutes. Do not massage any particular area of the body for more than 5 minutes. Keep massage session to a maximum of 30 minutes per day. Select any of the 8 automatic programs: [ ] Full-Body - A comprehensive full-body massage with air bags and roller system for deep relaxation. [ ] Full Air - Recommended for those who prefer a softer full-body massage using air bags. [ ] Relax - Fully relaxes your body for a good rest. [ ] Energize - Awakens your muscle to prepare them for the day ahead. [ ] Swedish - This program consists of harder 2 kneading and tapping massage. [ ] Rejuvenate - This program consists of gentler kneading and tapping massage. (Recommended for youth aged 14 years and above.) [ ] Stretch - This program consists primarily of movement and air pressure to stretch the body. [ ] Quick - This program provides a quick 5 minutes massage to refresh the entire body. (Once an automatic program button is pressed, the initialization function will begin. During the process, you must remain seated with your head on the headrest.) 3 4 The massage program begins when the initialization is completed. You can adjust your desired shoulder position further by pressing the [ ] or [ ] button within 6 seconds after initialization function has ended. The progress is shown on the LCD. The selected massage program button will remain lit during the program (The default timing for all massages is 15 minutes). uastro2 will beep twice when there is 1 minute left in the massage program. You may extend the massage by pressing the [ ] button. After the massage has completed, the rollers will return to their storage position. 15
Massage programs and selections Localized area program You may select and combine your favourite massage areas by pressing the respective localized area massage buttons. 1 Press the [ ] button to turn on the controller. To make a selection from the manual selection mode, open the front panel on the controller. Chair will go into idle mode after 5 minutes if no selection is made. 2 There are 4 localized area massage programs (Neck & Shoulder, Arm, Seat & Lumbar (Air), Back & Lumbar, Foot Air & Roller) which can be combined to user s desire. (When Back & Lumbar program is selected, the initialization function will begin. During the process, you must remain seated with your head on the head rest. The massage program begins when the initialization is completed. You can adjust your desired shoulder position further by pressing the [ ] or [ ] button within 6 seconds after initialization function has ended.) There are also 4 types of manual massage programs for user to select and combine. (When Rolling is selected in a combination, Kneading and Tapping cannot be activated. When Foot Air & Roller are selected in a combination, Roller cannot be activated.) Note Keep each massage session to no longer than 15 minutes. Do not massage any particular area of the body for more than 5 minutes. Keep massage session to a maximum of 30 minutes per day. Manual massage programs You may select and combine your favorite massage type, speed and intensity by pressing the respective manual selection buttons on the controller. 3 Select and combine your massage type, strength and intensity by pressing the respective manual selection buttons. Kneading, Roller, Rolling, Tapping are able to combine with localized area programs. (When Rolling is selected in a combination, Kneading and Tapping cannot be activated. When Foot Air & Roller are selected in a combination, Roller cannot be activated. When Back & Lumbar is selected in a combination, Kneading, Tapping and Rolling cannot be activated.) 4 The massage will end after approx. 15 minutes. After the massage is completed, the rollers will return to the storage position. 16
Massage programs and selections Adjusting automatic program, localized area program or manual program settings Timer button Default time is at 15 minutes. User is able to change the timer from a selection of 5, 10, 15, 20, 25 and 30 minutes. Heat button Heat function is set to off by default. It is applicable during any automatic program, localized area program or manual program. You may also use the heat function on its own. Air intensity button The intensity of the air massage starts off at default level 3. Each time the button is pressed, the intensity will increase by 1 level. The maximum level is 5. If the program is changed, the intensity level will reset to its default level. Massage strength button The strength of the massage starts at level 3 by default. (By default, the massage starts at level 2 for Swedish program and level 1 for Rejuvenate program). Each time the button is pressed, the strength will increase by 1 level. The maximum level is 5. If the program is changed, the massage strength is reset to its default level. Vibration Button The vibration mode can be switched on or off while any of the programs are running. User can select from Seat or Hand area to switch on or off the vibration. Focus button The focus function can only be activated during Kneading and Tapping massage mode. When Focus is selected, user can press the [ ] or [ ] button to set desired massage position. Roller width button The roller width function can only be activated during Tapping and Rolling massage mode. By default, the roller width is set at Mid. User may change from Narrow, Mid and Wide roller widths. 17
Massage programs and selections Changing the massage program You may change from one massage program to another at any time without having to wait for it to complete. Selecting a different program during another program will cause the rollers to return to their storage position and begin the newly selected program. However, changing between programs will not reset the timer. Stopping a massage session Press the [ ] button to stop all massage functions. The rollers will move back to the storage position and all air bags will deflate, ending the massage. The [ ] button will change to a yellow color and go into standby mode. Pausing a massage session To pause a massage, press the [ ] button on the controller. This will temporarily freeze all operations. Press the [ ] button again to resume massage. Note In an emergency or any malfunction, press [ ] button to stop the massage immediately. Rollers will not return to storage position. Press the [ ] button to bring the rollers to the storage position again and turn off the main switch. Caution To avoid accidents and malfunction of the uastro2 Massage Chair, switch off the Main Switch and disconnect the power plug from the electrical outlet after use. Always disconnect the power plug from the electrical outlet if the uastro2 Massage Chair is not being used for a period of time. 18
Product care and storage Storing the uastro2 Wipe off dust and dirt from the uastro2 with a soft, dry cloth after use. Keep the uastro2 clean and away from places of high humidity. If the uastro2 is not in use for a long period of time, cover it with a dust cover and disconnect its power plug from the electrical outlet. Caution Caution against discoloration: Do not store the uastro2 under direct sunlight or in places of high temperature. This may cause the color of the upholstery to fade. Do not allow the uastro2 to remain in contact with vinyl or wallpaper for extended periods of time as this could lead to discoloration. Caution Do not use abrasive cleaning agents like benzene or thinner to clean the uastro2. This may cause the upholstery to fade. Do not iron the fabric of the uastro2. Cleaning of the controller Use only a dry cloth to clean the controller. Caution Do not use a wet cloth to clean the controller. This may result in malfunction. Cleaning of the uastro2 Before cleaning, ensure that the main power switch is turned off and the AC plug is disconnected from the electrical outlet. Wipe off dust and dirt from the uastro2 after use. The uastro2 can be cleaned thoroughly with a piece of slightly damp cloth. Do not iron the upholstery. Do not wash the upholstery using a domestic washing machine as it may deteriorate the upholstery quality. 19
Troubleshooting If you encounter problems operating the uastro2 Massage Chair, please check the following points to see if they can be rectified. If the uastro2 Massage Chair still malfunctions or does not work, please switch off the Main Switch of the uastro2 Massage Chair and remove the power plug from the electrical outlet. Contact Brookstone Customer Service at 866-336-3199 for servicing. Do not dismantle or attempt to repair the uastro2 Massage Chair yourself. Doing so will void the warranty and Brookstone will not bear any responsibility for any subsequent consequences. Problem Friction noise of rollers against seat cover. Motor sound during operation. Loud sound during Tapping and Kneading program. Operation stopped and the massage rollers moved to their original position. Possible cause/action These sounds are the result of mechanical structure and not malfunction. This may occur during normal usage. The Auto-Timer of 15 minutes has lapsed. Press any program button to restart the massage. The uastro2 is equipped with a thermal resetting protection device. This is an added safety feature to protect your massage chair from overheating. The [ ] button was pressed accidentally. If the uastro2 stops and fails to restart as a result of overheating, turn off the main power switch and do not operate the uastro2 for at least 30 minutes. Failure to do so may result in the chair resuming operation unexpectedly when the device is cooled down. The controller does not work correctly. The uastro2 does not start operation. Check the power plug and ensure that it is securely connected to the electrical outlet. Check the connection at the back of the uastro2. Ensure that the main power switch is turned on. Ensure that the main power switch is turned on and the switch on the electrical outlet is turned to on position. Ensure that the power plug is firmly connected to the electrical outlet. Check that the voltage of the electrical outlet is adequate. 20
Troubleshooting (continued) Problem The massage rollers stop during the massage. The massage rollers have moved to the upper position. The right and left rollers are not positioned horizontally. The backrest and leg rest can not be reclined/raised and retracted/extended. Beeping sound and LED indicators blinking on the controller. The air massage stops when the chair is reclined. Possible cause/action The roller mechanisms may be strained when subjected to excessive force. Try to reduce pressure added on the rollers. When the massage program finishes, the rollers will automatically return to the storage position (upper position of the backrest). To continue with the massage, press the power button on the controller again. This is the result of alternate tapping by right and left rollers and this is normal. Ensure that no objects are caught behind the backrest or leg rest that can cause the safety reclining sensors to be activated. Remove and reconnect the AC plug to the electrical outlet. For safety reasons, the air massage will stop when adjustments are made to the backrest recline angle. This is not a defect. 21
Specifications Model name Model number Voltage uastro2 OS-820 110-120V ~ 60Hz Power consumption Approximately 250W 4.0A Rating time Kneading speed (5 levels) Tapping speed (5 levels) Rolling speed Massage rollers width 15 minutes Minimum approximately 12 times/minute Maximum approximately 37 times/minute Minimum approximately 156 times/minute Maximum approximately 661 times/minute 1 cycle (up/down/up) approximately 34 sec 3 levels (Narrow/Medium/Wide) Massage range Full rolling (approximately 20 ) Lower back rolling (approximately 5.5") Leg rest Max. extension approximately 7" Automatic program Manual selection Air massage Reclining Zero gravity angle 8 automatic programs 10 manual selections Air pressure (approximately 36kPa) Approximately 114 to 148 degrees against flat floor 143 degrees 22
Specifications (continued) Dimensions Upright position - Approximately 35"(W) x 54"(L) x 50"(H) Reclined position - Approximately 35"(W) x 70"(L) x 40"(H) Net Weight Approximately Chair and leg rest Armrest 245 lbs Approximately 198 lbs Approximately 46.5 lbs 23
Notes 24
One (1) Year Limited Warranty Brookstone warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser ( Warranty Period ). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product. A replacement product or part, including a user-installable part installed in accordance with instructions provided by Brookstone, assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstone s property. When a store credit is given, the original product must be returned to Brookstone and becomes Brookstone s property. Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at 877-435-6332. Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt is required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary. You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center for replacement, per our instructions. Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only to products manufactured for Brookstone that can be identified by the Brookstone trademark, trade name, or logo affixed to them or their packaging. The Limited Warranty does not apply to any non-brookstone products. Manufacturers or suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products as is. This warranty does not apply to: a) damage caused by failure to follow instructions relating to product s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of Brookstone; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold as is including, without limitation, floor demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose. Brookstone SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 25
Find thousands more great ideas online 792590 Merrimack, New Hampshire USA 03054 800-846-3000 Brookstone.com