ZK0 OUNTING SLE HEKWEIGHER ENH SLE High resolution industrial or laboratory digital scale ZK0 (0mm) Round Platter with draft shield ZK0 x (0x0mm) with stack light and keypad Technical Specification ESRIPTION ZK0 9 x (0x0mm) with keypad The ZK0 is a high resolution Quartzell digital bench scale that can be set up as a dedicated counting scale, checkweigher or a standalone bench balance. The unique modular base and indicator combination uses our robust SQ Quartzell bench base with up to billion internal count resolution and 00% overload protection. Teamed with the user-friendly, multi-function ZK0 indicator, this scale performs in a wide range of industrial or laboratory applications and environments. ounting With the ability to count a wide range of components, from micro parts weighing less then 0 mg to much heavier items, the ZK0 comes with easy-to-use accurate sampling routines, allowing up to 99.% sampling accuracy. The scale has 0 PLU piece weight data storage, a full range of connectivity and the ability to link in a second remote platform. heckweighing Fast, reliable and extremely accurate, the ZK0 is simple to operate with high resolution under, over and accept bands and a PLU target weight data base capable of holding up to 0 target weights with high and low weight limits. The ZK0 hosts full range of connectivity for capturing data along with I/O for running external light stacks or alarms if required. High Resolution alance esigned for accuracy and reliability, this high resolution scale provides balance accuracy for use in industrial or laboratory environments. High resolution mode enables the operator to quickly view an improved resolution reading by a factor of 0, at the press of a key. OUNTING SPEIFITIONS OPERTING PPLITIONS ounting pplication Easy-to-use sampling routines including a one key press bulk process to a two key press dribble sampling routine where the sample key is pressed once all sample parts are on the scale (dribble is the default mode) Positive and negative sampling both possible heck ounting Ideal when batching product by count items rather than weight ount ccumulation esigned to quickly totalize all counted items that have been processed or counted on the scale 0 PLU ata Storage Stores and recalls piece weight and tare weights within the scale Second Remote ase uto or key activated remote base switching
ZK0 OUNTING SLE Technical Specification SUPERVISOR ONTROLLE KEY VNE SETTINGS Required Sampling Routine Minimum Sample Size Required ccuracy Minimum Sample Weight ata ase Edit uto omponent Latching uto ase Switching ulk or dribble sampling (default setting is dribble) Limits the sample size that can be entered in the scale HEKWEIGHING SPEIFITIONS OPERTING PPLITIONS heckweighing SUPERVISOR ONTROLLE KEY VNE SETTINGS Target Window Tolerance Under and Over Segment llows supervisor to set the required scale accuracy subject to the environment and components being weighed (up to 99.%) Limits the operator on the minimum sample weight they can use to get an accurate piece weight (turning this function off reduces the probability of achieving the required accuracy) llows supervisor to store up to 0 known piece weights and tare weights along with upper and lower limits if check counting is activated Ideal when weighing extremely light components to help stabilize the weight reading after counting llows the supervisor to select which base they want to use for sampling when a second base is installed High resolution target weight checkweighing application, ideal for target weight data retrieval or for improving product line efficiency. esigned for easy setup of target weight with easy-to-read under, over and accept segments to improve throughput to help reduce operator fatigue llows supervisor to easily set the accept window by the required + or - weight from the target point llows the supervisor to set the three segments for under and the three segments for over independently, by division size 0 PLU ata Storage llows regularly used target weight accept band limits to be stored and recalled along with any required stored tares ccumulation Transaction ounter esigned to totalize gross or net weights ounts the number of transactions the scale has performed ENH SLE SPEIFITIONS OPERTING PPLITIONS Weigh Only Mode ccumulation High resolution weigh only function simplifies user operation. Utilises standard functions such as gross net, tare weight, unit switching and printing High resolution mode allows the operator to simply press a key to quickly view a higher resolution reading by a factor of 0 (remote keypad is recommended when using this function) esigned to totalize gross or net weights 0 PLU ata Storage llows regularly used tare weights be stored and recalled ccumulation Transaction ounter esigned to totalize gross or net weights ounts the number of transitions the scale has performed Percentage Weighing llows the scale to display the percentage of weight change from a known set target weight ZK0 INITOR OPERTING PPLITIONS ompatibility Supplied connected to one SQ base as standard Max number of bases allowed: two (one local SQ base and a second SQ or analogue platform) an link to a second SQ by utilizing one RS port an also link to an analogue remote base (with up to six 0 ohm loadcells) by installing an optional V excitation analogue base card and remote keypad Units of Measure onstruction Indicator isplay Two independent configurable units of measure (pounds, kilograms, grams, ounces custom) High resolution Quartzell mounted inside a robust aluminium die-cast clamshell SQ base with 00% overload and shock load protection ZK0 indicator is protected inside a tough S indicator housing that is most commonly mounted to the front of the SQ base. This ZK0 indicator can also be easily removed for wall or deck mounting. Max workable distance for indicator to work away from the base is 0 ft (m) Green on black IN display ideal for low lit areas. Easy to read seven digit ½ (mm) high seven segment display. Green under, over and accept segment bar.
Metrology ata Indicator to ase ommunications ZK0 onnection Sockets Power Options attery Power Option Stored within the ZK0 indicator Local SQ base connection: one dedicated RS connection using a keyed RJ connector found on the rear of the ZK0 indicator Second SQ base: to be wired in through the RS communication port (one found on the rear of the ZK0 indicator) (SM, 00, eight data bits, none, one stop bit) Second analogue base: wired into dedicated second analogue base connector. Requires optional V ex card fitting along with remote keypad ZK0 comes as standard with two serial ports, one Ethernet, three inputs and three outputs Two RS serial ports (green connector) One mini US VP port: connected in parallel with OM or consumes OM if used One Ethernet port (local base: client or server. ual base: server only) One analogue port (green connector ) only active when optional V analogue card is fitted One side RJ connector dedicated for remote keyboard only One 9V power socket to allow the base or indicator to be powered from the socket on the rear of the SQ base or directly from the rear of the ZK0 indicator 00V to 0V 0/0 Hz switch mode power supply mounted to the rear of the base ase can be powered using either a power jack on the rear of the base or to the rear of the indicator Factory fit NIMH rechargeable battery option to give up to hours of continuous usage Or ZQ remote battery option gives up to hours continuous usage MIN PITIES N RESOLUTIONS VILLE Weigh Platter Size Non Legal for Trade 00,000d Legal for Trade 0,000d NTEP Non Legal for Trade 00,000d Legal for Trade OIML 0,000d dia (mm) lb x 0.0000 lb lb x 0.000 lb 000 g x 0.0 g 000 g x 0. g dia (mm) 0 lb x 0.000 lb 0 lb x 0.00 lb 000 g x 0.0 g 000 g x 0. g 9 x or x (0 x 0 or 0 x 0mm) 0 lb x 0.00 lb 0 lb x 0.0 lb kg x 0.000 kg kg x 0.00 kg x (0 x 0mm) lb x 0.00 lb lb x 0.0 lb 0 kg x 0.00 kg 0 kg x 0.0 kg Operating Temperature Foot djustment IP Rating arry Handles Options F to 0 F / + to 0 (approvals) at 0 to 90% humidity - F to 0 F / -0 to 0 (industrial) at 0 to 90% humidity Water resistant anti-slip rubber foot with finger grip locking ring to allow up to 0. (9 mm) height adjustment esigned to meet IP arry handles allow this scale base to be easily carried around all top for x (0 x 0mm) base raft shield (up to 0 lb / kg only) lamp down plate Printers Scanners Remote analogue card Wireless card Stack light Indicator wall or desk brackets Underhook (only used on bases up to 0lb / kg) or (0 x mm) Stainless steel indicator columns pprovals NTEP 0,000d Measurement anada 0,000d* OIML 0,000d, E 0,000d UL/c-UL-US, E, RoHs, RM approved* *pending Measurement * anada pproved
ZONE. [ mm]. [9 mm].9 [ mm] IMENSIONS 9 x ( x dimensions can be found on the next page) 9. [ mm] RWING ISSUE REOR ZONE ISSUE ESRIPTION Y TE PPR ZONE ISSUE 0-pr-. [ mm]. [ mm]. [9 mm].9 [ mm]. [9 mm].9 [ mm]. [ mm]. [00 mm] RWING ISSUE REOR ESRIPTION.00 [0 mm] 9.00 [9 mm] ZONE ISSUE Y TE PPR 0-pr-. [9 mm]. [ mm].9 [ mm]. [ mm] ZONE IS 9. [. mm] [ mm] MX. [ mm] MIN. [9 mm]. [ mm].9 [ mm] 9. [ mm]. [9 mm].0 [0 mm] FOOT. [ mm] 0.00 [ mm].00 [ mm] 9. [ mm].9 [ mm] MX. [ mm] MIN. [ mm] 9. [ mm]. [.00 mm] [0 mm].0 [ mm] 9. [ mm]. [ mm]. [00 mm]. [00 mm] THIR NGLE PROJETION UNLESS OTHERWISE SPEIFE, LL O NOT SLE R IMENSIONS RE IN INHES..00 [0 mm] 9. [ mm] 9.00 [9 mm] TOLERNES RE: REMOVE URRS & SH.9 [ mm].0 [ mm] PLE EIMLS.0 PLE EIMLS.00 RWN Greg NGLES EG.. [ mm] HOLE I TOLERNES THRES HEK 0 ITW group of companies. ll rights.000-.0 +.00/-.00 INT. EXT. MEH ENG reserved. No part of this publication may be.-.00 +.00/-.00 LSS LSS.00 [0 mm] or transmitted in any form or by any means, OVER.00 +.00/-.00 ELE ENG 9.00 [9 mm] otherwise without the prior written consent of the MTERIL be given. very Weigh-Tronix is a registered trade. [ mm] MX. [9 mm] however, very Weigh-Tronix reserves the right to. [ mm] MIN. [ mm]. [00 mm].0 [ mm].9 [ mm].0 [ mm].0 [0 mm]. [mm] MX. [9 mm].0 [ mm]. [mm] MIN FOOT. [ mm].00 [ mm]. [ mm]. [00 mm].9 [ mm] MX. [ mm] MIN.00 [0 mm] 0.00 [ mm] 9. [ mm]. [ mm].0 [0 mm].00 [0 mm] 9.00 [9 mm] 9.00 [9 mm].00 [0 mm].0 [ mm] FOOT. [ mm]. [ mm].00 [ mm]..9 [[mm] MX.0 [ mm]. [ mm]. [ mm]. [mm] MIN 0.00 [ mm] 9. [ mm]. [ mm].. [mm] MX. [ 9.00 [0 mm] 0. mm [ ]. mm] [9 MXmm].0 [ mm].. [. mm [9 mm] ]. [mm] MIN. [ mm] MIN.0 [.0 mm] [ mm] PN WT-0_zk0.9. 0 9 mm.0 [0 mm].0 [0 mm] with romote. [9 THIR mm] NGLE PROJETION UNLESS OTHERWISE SPEIFE, LL O NOT SLE RWING THIR NGLE PROJETION UNLESS OTHERWISE SPEIFE, LL O NOT SLE RWING IMENSIONS RE IN INHES. IMENSIONS RE IN INHES. TOLERNES RE: REMOVE URRS & SHRP EGES very Weigh-Tronix, LL TOLERNES RE: REMOVE URRS & SHRP EGES FOOT. [ mm]. [ mm] FOOT. [ mm].00 [ mm].9 [mm] MX.9 PLE EIMLS.0 TE. PLE EIMLS 000 rmstrong.00 [ rive, mm] Fairmont, MN 0, US mm.9 [ mm] MX.0 TE [ ] PLE EIMLS.00. [mm] MIN PLE EIMLS.00. [ mm] MIN RWN Greg bel 0-pr- RWN Greg bel 0-pr- 0.00 [ mm] 0.00 [ mm] NGLES EG. NGLES EG. 9. [ mm]. [ HEK mm] 9. [ mm]. [ mm] HOLE I TOLERNES THRES HEK 9. [ mm] HOLE I TOLERNES THRES 9. [ mm] 0 ITW group of companies. ll rights.000-.0 +.00/-.00 INT. EXT. OUTLINE 0 ITW group of companies. RWING, ll rights.000-.09x MEH ENG +.00/-.00 INT. EXT. MEH ENG reserved. No part of this publication may be.-.00 +.00/-.00 LSS LSS reserved. No part of this publication may be.-.00 +.00/-.00 LSS LSS or transmitted in any form or by any means, OVER.00 +.00/-.00.00 [0 mm].00 [0.0 or mm] transmitted [ in mm] any form or by any means, OVER.00 +.00/-.00 ELE ENG.0 [ mm] KG ELE ENG otherwise without the prior written consent of the otherwise without the prior written consent of the MTERIL 0.00 [ mm] MTERIL.0 [0 licence. mm] Full acknowledgment of the source must be given. very Weigh-Tronix is a registered trade SIZE WG. be given. NO. very Weigh-Tronix is a registered trade ISSUE SIZE mark WT-0_zk0 of the ITW group of companies. This. [9 mm] however, very Weigh-Tronix reserves the right to however, very Weigh-Tronix reserves the right to.00 PN WT-0_zk0 [ alter mm] without notice the with specification, design, romote price SLE SHEET SLE with romote OF THIR NGLE PROJETION UNLESS OTHERWISE SPEIFE, LL O NOT SLE RWING 9. [ mm] IMENSIONS RE IN INHES. TOLERNES RE: REMOVE URRS & SHRP EGES very Weigh-Tronix, LL PLE EIMLS 000 rmstrong rive, Fairmont, MN 0, US.0 TE PLE EIMLS.00 RWN Greg bel 0-pr- NGLES EG. HOLE I TOLERNES THRES HEK 0 ITW group of companies. ll rights.000-.0 +.00/-.00 INT. EXT. OUTLINE RWING, 9X MEH ENG reserved. No part of this publication may be.-.00 +.00/-.00 LSS LSS THIR NGLE PROJETION UNLESS OTHERWISE SPEIFE, LL O NOT SLE RWIN or transmitted in any form or by any means, OVER.00 +.00/-.00 ELE ENG KG IMENSIONS RE IN INHES. otherwise without the prior written consent of the MTERIL TOLERNES RE: REMOVE URRS & SHRP E PLE EIMLS.0 be given. very Weigh-Tronix is a registered trade SIZE WG. NO. ISSUE WT-0_zk0 PLE EIMLS.00 RWN Greg bel however, very Weigh-Tronix reserves the right to NGLES EG. with romote HOLE I TOLERNES THRES HEK SLE SHEET 0 ITW group of companies. ll rights.000-.0 OF +.00/-.00 INT. EXT. MEH ENG reserved. No part of this publication may be.-.00 +.00/-.00 LSS LSS or transmitted in any form or by any means, OVER.00 +.00/-.00 ELE ENG otherwise without the prior written consent of the MTERIL THIR NGLE PROJETION UNLESS OTHERWISE SPEIFE, LL be given. very Weigh-Tronix is a registered trade IMENSIONS RE IN INHES. TOLERNES RE: however, very Weigh-Tronix reserves the right to. [ mm] PLE EIMLS.0. [ mm]. [00 mm] PLE EIMLS.00. [00 mm] R NGLES EG. HOLE I TOLERNES THRES H.0 [ mm] 0 ITW group of companies. ll rights.0 [ mm].000-.0 +.00/-.00 INT. EXT. M reserved. No part of this publication may be.-.00 +.00/-.00 LSS LSS or transmitted in any form or by any means, OVER.00 +.00/-.00 EL.0 [ mm].0 [ mm] otherwise without the prior written consent of the MTERIL FI be given. very Weigh-Tronix is a registered trade.0 [9 mm].0 [9 mm] however, very Weigh-Tronix reserves the right to [ ] [ ] [ ].0.9 99 0 mm.0.9 99 0 mm [ ] [ ].. mm.. [9 mm]. mm. [9 mm].0 [0 mm].0 [0 mm]. [ mm]. [ mm].00 [ mm].00 [ mm].9. mm.9. mm 0.00 [ mm] 9. [ mm] 0.00 [ mm] 9. [ mm].0 [ mm].0 [ mm]. [9 mm]. [9 mm] WT-0 RFT RFT SHIEL SHIEL 9x 9x ZK0 ZK0 WITH WITH REMO R [ ] [ ]
ZK0 SMPLE SLE F PLU F 9 THE OUNTING FETURE IS NOT LEGL FOR TRE PWT F 0 Operator Keys Remote Keypad (optional) ase Size and apacity Six metal domed keys with audible feedback (Sample F, Tare, Select, Zero, Print, Units) key remote keypad that can easily be attached to any ZK0, giving expanded functionality Required when using a second remote base, when using internal stored PLU database, or entering known piece weights or tare weights Key functions: 0 to 9 numeric keys, cancel, decimal point, scale switching, PLU, piece weight key lb to lb (00 g to kg) Max 9 x with (mm) diameter weight platter lb to 0 lb ( kg to kg ) Max 9 x with (mm) diameter weight platter 0 lb to 0 lb ( kg to kg) Max 9 x (0mm x 0mm) 0 lb to 0 lb ( kg to kg) Max x (0mm x 0mm) 0 lb to lb ( kg to 0 kg) Max x (0mm x 0mm) igital Filtering Time and ate alibration isplay Rate Non Legal for Trade Resolution Three digital Harmonizer filters stored within the indicator with adjustable average, constant and threshold filter settings attery backed up time/date/year ( hour or hour format) Up to five points of calibration, stored within the ZK0 indicator 00Hz 00,000 divisions center of pan, stable room temperature Up to three range multi interval or multi range can be configured for non legal for trade applications Legal for Trade Resolution 0,000 divisions class III (single range only) nd Remote analogue base NTEP 0,000d (E/OIML 000d) Readability Internal Resolution Loadcell Technology Overload Protection orner Loading Recommended Minimum Piece Weight by ase Type (Sample Size of 0) ount ccuracy Filter Setting reep Minimum Recommended Non Verifiable ivision Size an be set up to display up to,00,000 divisions billion counts (,000,000,000 internal counts) High accuracy digital Quartzell transducer 00% overload protection Spring breakaway system is activated at 0% full capacity or 0% corner only load lb (kg) min piece weight : 0.00000 lb ( mg) min sample weight: 0.000 lb (0. g) 0 lb (kg) min piece weight : 0.0000 lb (0 mg) min sample weight: 0.00 lb (0. g) 0 lb (kg) min piece weight : 0.000 lb (0 mg) min sample weight: 0.00 lb (. g) lb (0kg) min piece wei ght: 0.000 lb (0 mg) min sample weight: 0.0 lb ( g) Fully configurable up to 99.% subject to environment and component size being sampled ontrolled within the ZK0 indicator 0.00% of 00,000 divisions over a 0 minute period or 0.000% of 00,000 divisions over a five minute timespan 0.00000 lb (0.000 g) for the lb ( kg) SQ base 0.00000 lb (0.00 g) for the 0 lb ( kg) SQ base 0.0000 lb (0.0 g) for the 0 lb ( kg) SQ base 0.0000 lb (0.0 g) for the lb (0 kg) SQ base ivision Size (lass III) 0.000 lb (0. g) for the lb ( kg) SQ base (0,000d approved) 0.00 lb (0. g) for the 0 lb ( kg) SQ base (0,000d approved) 0.00 lb ( g) for the 0 lb ( kg) SQ base (0,000d approved) 0.00 lb ( g) for the lb (0 kg) SQ base (0,000d approved)
ZK0 OUNTING SLE Technical Specification IMENSIONS x RWING ISSUE REOR ZONE ISSUE ESRIPTION Y TE PPR.0 [ mm]. [9 mm].9 [ mm].0 [ mm]. [9 mm].9 [ mm] RWING ISSUE REOR 0-pr- ZONE ISSUE ESRIPTION Y TE PPR.0 [ mm]. [9 mm].9 [ mm].0 [ mm]. [9 mm].9 [ mm] 0-pr-. [ mm]. [ mm]. [ mm]. [ mm] RWING ISSUE REOR ZONE ISSUE ESRIPTION Y TE PPR 0-pr-. [9 mm].0 [ mm].9 [ mm]. [ mm]. [00 mm]. [ mm]. [00 mm].0 [ mm]. [ mm]. [9mm] MX. [0mm] MIN. [00.0 mm] [ mm].0 [ mm].0 [ mm].99 [ mm]. [ mm]. [9 mm].99 [ mm]. [ mm]. [9mm] MX. [0mm] MIN.00 [0.0 mm] [ mm]. [00 mm].00 [0.0 mm] [ mm].99 [ mm].99. [ mm] [9 mm]. [9mm] MX. [0mm] MIN. [ mm] FOOT. [ mm].0 [9 mm] FOOT..0 [ mm] [ mm].0 [9 mm].0 [ mm]. [00 mm].0 [ mm].0 [0 mm]. [9 mm]. [9mm] MX. [0mm] MIN.0 [0 mm].99 [ mm] FOOT 0.00. [[ mm] mm]. [.0 mm] [9 mm]. [0 mm] FOOT 0.00. [.0 [ mm] mm] [ mm]. [.0 mm] [9 mm] THIR NGLE PROJETION UNLESS OTHERWISE SPEIFE, LL O NOT SLE RWING IMENSIONS RE IN INHES. TOLERNES RE: REMOVE URRS & SHRP EGES. [0 mm] PLE EIMLS.0 [ mm].0 PLE EIMLS.00 RWN NGLES EG. HOLE I TOLERNES THRES HEK 0 ITW group of companies. ll rights THIR NGLE PROJETION.000-.0 UNLESS +.00/-.00 OTHERWISE SPEIFE, INT. EXT. LL MEH ENG reserved. No part of this publication may be O NOT SLE RWING.-.00 IMENSIONS +.00/-.00 RE IN LSS INHES. LSS or transmitted in any form or by any means, OVER.00 +.00/-.00 TOLERNES RE: ELE ENG REMOVE URRS & SHRP EGES otherwise without the prior written consent of the MTERIL PLE EIMLS.0 PLE EIMLS.00 be given. very Weigh-Tronix is a registered trade RWN NGLES EG. however, very Weigh-Tronix reserves the right to HOLE I TOLERNES THRES HEK or 0 conditions ITW of group supply of of companies. any product ll or rights service at.000-.0 +.00/-.00 INT. EXT. MEH ENG any reserved. time. No part of this publication may be.-.00 +.00/-.00 LSS LSS or transmitted in any form or by any means, OVER.00 +.00/-.00 ELE ENG otherwise without the prior written consent of. the MTERIL [ mm] be given. very Weigh-Tronix is a registered trade.00 [0 mm] however, very Weigh-Tronix reserves the right to.0 [0 mm]. [9 mm].9 [mm] MX. [mm] MIN. [ mm].0 [0 mm] PN.9 [mm] MX. [mm] MIN WT-0_x_zk0. [ mm] with romote very Weigh-Tronix, LL 000 rmstrong rive, Fairmont, MN 0, US TE PN Greg bel 0-pr- WT-0_x_zk0 OUTLINE RWING, with X romote very Weigh-Tronix, KG LL 000 rmstrong rive, Fairmont, MN 0, US TE Greg bel 0-pr- SIZEWT-0_x zk0 WG. NO. ISSUE OUTLINE with RWING, romote X SLE SHEET OF KG SIZEWT-0_x zk0 WG. NO. ISSUE with romote SLE SHEET OF THIR NG 0 ITW THIR group NG of co reserved. No part of th reproduced, stored in a or transmitted in any fo electronic, mechanical otherwise without the p copyright owner, or as licence. Full acknowle be given. very Weigh mark of the ITW group publication was correc however, very Weigh alter 0 without ITW notice group the of or reserved. conditions No of part supply of reproduced, stored in or transmitted in any electronic, mechanic otherwise without the copyright owner, or a licence. Full acknow be given. very Weig mark of the ITW grou publication was corre however, very Weig alter without notice th or conditions of supp. [9mm] MX. [0mm] MIN. [9 mm].9 [mm] MX. [mm] MIN.0 [0 mm] FOOT. [ mm] 0.00 [ mm].0 [9 mm].0 [ mm]. [0 mm] THIR NGLE PROJETION 0 ITW group of companies. ll rights reserved. No part of this publication may be or transmitted in any form or by any means, otherwise without the prior written consent of the be given. very Weigh-Tronix is a registered trade however, very Weigh-Tronix reserves the right to. [ mm] UNLESS OTHERWISE SPEIFE, LL O NOT SLE RWING IMENSIONS RE IN INHES. TOLERNES RE: REMOVE URRS & SHRP EGES PLE EIMLS.0 TE PLE EIMLS.00 RWN Greg bel 0-pr- NGLES EG. HOLE I TOLERNES THRES HEK.000-.0 +.00/-.00 INT. EXT. MEH ENG.-.00 +.00/-.00 LSS LSS OVER.00 +.00/-.00 ELE ENG MTERIL. [ mm] PN WT-0_x_zk0 with out romote very Weigh-Tronix, LL 000 rmstrong rive, Fairmont, MN 0, US OUTLINE RWING, X KG SIZE WT-0_x_zk0 WG. NO. ISSUE with out romote centered SLE SHEET OF www.averyweigh-tronix.com very Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc ( Illinois Tool Works ). opyright 0 Illinois Tool Works. ll rights reserved. This publication is issued to provide outline information only and may not be regarded as a representation relating to the products or services concerned. This, however very Weigh-Tronix reserves the right to very Weigh-Tronix is an ITW company ZK0 Spec_UK_0.indd V WT-0