Telpro Panellift Plasterboard Sheet Lifter Used to lift and position plasterboard sheets onto walls or ceilings. Strong welded construction which disassembles easily for transport. Standard unit has load capacity of 68Kg and lifts 4.8m long sheets to 3350mm high. Tripod legs fold inward so unit can pass through doorways. Cradle tilts laterally 65 for easy loading and is spring loaded to horizontal position. It also tilts longitudinally to 10 for sloping walls or ceilings. Has three large, easy rolling 125mm castors. BENEFITS AT A GLANCE: - Sheet capacity 4.8m - Max Height 3350mm (Extension to 4570mm available) - Durable welded steel construction Easily portable components assembles in seconds with no tools required Intex - Telpro Panellift Plasterboard Sheet Lifter CODE DESCRIPTION QTY. BARCODE WEIGHT KG PL164 Intex - Telpro Panellift Plasterboard Sheet Lifter 1 74391300125 46.4
Telpro Doorminator Door Handler The Doorminator allows a single person to easily and safely handle, install and remove solid core doors. The Doorminator loads easily and the tricycle configuration design allows the operator to easily roll the door from one location to the other. The larger wheels on the Doorminator provide a smooth transition from point to point, even on the job site. The Doorminator is also fully adjustable; tilts forwards and backwards, side to side, and rises up and down, in order to align the door with the jamb. SPECIFICATIONS: - Max Load: 72 kg (160 lbs) - Max Door Height: 213.4cm (84") - Max Door Width: 121.9cm (48") 1 2 3 SPECIAL FEATURES: 1. The Tilt Handle will adjust the door forward (4 ) and backwards (12 ) on either side of plumb. 2. The Floor Plate moves out to support the door when in plumb or past plumb position. 3. The Door Hooks are spring loaded and can accommodate doors from 71cm (28") to 122cm (48") wide. 4. The Side Tilt Adjustment Wheel adjusts the door from Right (20) to Left (20) on either side of plumb. 4 5 3. The Lift Handle will lift the door from.6cm (1/4") to 5cm (2") off the floor. 5. The Back Leg folds for transportation and storage. Intex - Telpro Doorminator Door Handler CODE DESCRIPTION CTN QTY. WEIGHT KG DH3070 Intex - Telpro Doorminator Door Handler 1 NA
Telpro Doorminator Door Handler Instructions Position Doorminator in front of door. Load the door on the Door Support Shoe and secure with Door Hooks. With the Tilt Handle down the Doorminator will roll through the door opening. Align bottom corner of door with bottom corner of door jamb. Adjust Doorminator so that the door is parallel with the jamb and hinges align. Fasten hinges to jamb or door. After hinges are secured push door away from Doorminator.
Telpro DrillRite Overhead Drill Press Everyone who does it will agree that overhead drilling into concrete is punishing work. Many liken it to doing a balancing act four to six feet off the ground, whilst holding a 22kg sandbag over your head leaking in your face. This multiple patent pending Overhead Drill Press features many features and benefits for the professional tradesman: Reduces musculoskeletal strain associated with operating rotary hammer drills overhead. Reduces risk of job site falls by eliminating the need for ladders for overhead drilling. Integrated dust extraction system captures dangerous airborne silica dust (Dust Extractor sold separately). Conveniently reaches 3.6m ceilings (DR350) or 2.1m ceilings (DR210). Compatible with scissor lifts for higher ceilings. Holds a wide variety of rotary hammer drills, including a variety of corded & cordless drills. Chain lift mechanism for simplicity, durability, long life and low maintenance. Safety winch/clutch design simplifies & speeds operation. Portable design transports compactly. One year limited USA parts & service warranty. Manufactured in USA. The DrillRite Overhead Drill Press, equipped with an integrated dust extraction system is recommended for use with the Intex Starmix Dust Extractors. Intex Group is the registered and authorised Australasian distributor for Telpro Inc. Reduce the pain and fatigue of overhead drilling! Intex - Telpro DrillRite Overhead Drill Press CODE DESCRIPTION QTY. WEIGHT KG DR210 Intex Telpro DrillRite Overhead Drill Press - 213cm (2.1m) Reach 1 NA DR350 Intex Telpro DrillRite Overhead Drill Press - 365cm (3.6m) Reach 1 NA
Folded for easy Transportation Telpro Panellift Plasterboard Cart The innovative Telpro Panellift Material Handling Carts have been proven to be the most versatile, reliable carts available. Originally designed to carry quantities of plasterboard and similar materials, these Carts have since developed demand in many construction related industries, including use with metal works, pipe works, fencing and so on. BENEFITS AT A GLANCE: - Carry handle and easy dismantling for efficient transportation and storage - On-board storage for upright handles once dismantled - Easily converts to a flatbed multi-purpose cart - Ergonomic design for ultimate job site manoeuvrability - Ultra heavy duty construction supporting its huge weight capacity - Optional 'Skid Plate' base panel available for smaller material handling - Ability to team with the 'Spanning Platform' to create a 'Super Sized Cart' Intex - Telpro Panellift Plasterboard Cart CODE DESCRIPTION QTY. BARCODE WEIGHT KG CD136 Intex Telpro Panellift Plasterboard Cart 1800kg (4000lbs) Load Rating 1 9341229011783 39 Intex Group is the exclusive Australian distributor for Telpro Inc.
Telpro Panellift Plasterboard Cart Spanning Platform This versatile platform teams with two of the CD136 Plasterboard Carts to form a super sized cart, used to transport large packs of material around a construction site. Once quickly assembled, this unique system allows the operator to forklift units of material onto the cart and then easily proceed to manually wheel and manoeuvre the material around the job site. As well as the ability to load the cart with a forklift, the ultra heavy duty construction allows the platform system and its load to also be lifted by forklift, if the load needs to be delivered to alternate levels on the job site. This unit has proven an ideal solution for many construction related industries; namely the plasterboard trade. The CD272 saves the need of stacking plasterboard vertically which poses a major hazard on the job site and also the double handling the plasterboard; once the CD272 is loaded it can be wheeled directly to the plasterboard hanging location. As well as having a Load Rating of over 1.8 tons, is has the provision to store any length of plasterboard over 2.4m in flat packs. Not only is this exceeding all set and recommended safely standards, it's also highly practical, efficient and major safety solution for the plasterboard contractor. Cart sold separately : code CD136 BENEFITS AT A GLANCE: - Carry handle and easy dismantling for efficient transportation and storage - On-board storage for upright handles once dismantled - Easily converts to a flatbed multi-purpose cart - Ergonomic design for ultimate job site manoeuvrability - Ultra heavy duty construction supporting its huge weight capacity - Optional 'Skid Plate' base panel available for smaller material handling - Ability to team with the 'Spanning Platform' to create a 'Super Sized Cart' Intex - Telpro Panellift Cart Spanning Platform CODE DESCRIPTION DIEMENSIONS W.L.L QTY. WEIGHT KG CD272 Intex Telpro Panellift Plasterboard Cart Spanning Platform 743 x 1219mm 1.8 tons (1814kg) 1 37.8