AUTOMATED PLASMA CUTTING SYSTEMS ictor Thermal Dynamics introduces CUTMASTER A-SERIES The Cutmaster A-Series is the intelligent solution for economical and flexible plasma cutting with the proven reliability and quality of Cutmaster. Best In Class Cutting Performance Easy To Use And Set-Up Superior Quality At All Amperages Lightweight And Compact Design Durable In Even The Toughest Environments We Bring Intelligence to the Table. TM
ictor Thermal Dynamics introduces AUTOMATED PLASMA CUTTING The Automated Cutmaster Systems from ictor Thermal Dynamics are based on the same proven platform as the TRUE Series. The Cutmaster A-Series offers standard features to meet the needs of many automated applications. With all the advantages of 1Torch and proven Cutmaster reliability, the new automated Cutmaster A-Series delivers the best in productivity, precision and performance. A powerful % Duty Cycle to handle all-day production cutting in the toughest environments. Light-weight, compact design and convenient mounting feet allow for easy mounting in any application. alve-in-torch design reduces cycle time between parts and increases productivity. CNC Interface connection is located on the rear of the power supply offering Start/Stop, OK to MOE and divided arc voltage signals. Full arc voltage is available using an internal terminal connection. Software automatically detects the torch that is attached and switches between automation and manual modes. Dedicated automation software improves cycle time and performance in many applications. The A-Series Systems include the SL0 S 1Torch start technology eliminating the electronic interference that can occur with other designs. The 1Torch provides quick, reliable starts and a strong pilot arc to pierce heavy plate. With auto-pilot restart, it can also cut expanded metal quickly and easily. The SL0 S Torch comes with standard ATC Quick Disconnect in lengths of 25 ft (7. m), 35 ft (.7 m) and 50 ft (.2 m) (Longer torch leads up to 0 ft (.5 m) available). Features Mode selection Current control Pressure control Status display LED s Pressure/Error indicators Power switch on front ATC Quick Disconnect Torch detection allows fast change from an automation torch to a hand torch Multi voltage input power selection* * US/Canada Models Only 3 4 Plasma Start/Stop Signal 5 Divided Arc oltage 14 Cutting Machine OK To Move 3 1 5 4 14 3 4 Plasma Start/Stop Signal CNC Interface Connector on Rear of Power Supply Start / Stop input OK To Move output Standard 25' (7. m), 35' (.7 m) or 50' (.2 m) CNC cable Easy access to arc voltage via separate knock out hole and ring terminals inside Standard Keyhole Mounting Feet
Superior Cutting Performance Start Cartridge SureLok Electrode Technology The innovative, patented, self-locking electrode mechanism eliminates the need for an installation tool and ensures precise electrode and tip alignment. Both the electrode and tip are stationary which results in a highly defined arc and precise cuts. SureLok alignment also means longer tip and electrode life and reduced operating costs. Total Gas Management The SL0 S 1Torch eliminates the need for a separate plasma gas distributor. Each tip includes plasma gas ports uniquely tuned to optimize cutting performance at its rated current. Select from,,, 0,, 0 or 0 Amp tips to optimize your cutting. The result is Total Gas Management. Precision gas control, longer consumable parts life and better cut performance. Superior Quality at All Amperages Whether you are fabricating thick plate or cutting ornamental shapes, the Cutmaster Automation Series is perfect for the job. At 0 Amp output, the Cutmaster A0 produces the BEST CUT on " ( mm) mild steel plate at 70 IPM (1.8 m/ min). For those cutting intricate shapes, select low amperage tips for kerf widths less than 0.0" (1.14 mm) wide. High Frequency has been completely eliminated from the plasma system. A patented component called the Start Cartridge sits between the tip and electrode. The Start Cartridge is in contact with the tip while the torch is inactive. When a start signal is given, air forces the cartridge to break contact with the tip and the pilot arc is started. This unique design allows the pilot arc to start without moving either the tip or electrode, resulting in better parts life, cut performance and reliability. The start cartridge is the only moving part in the SL0S torch. Choice of Tip Shielding Choose from two consumable styles: Exposed Tip for cutting thin sheet at low power & narrow kerf. Shielded Tip for heavier plate piercing and cutting. Note: Use the Ohmic Clip with the Shielded Tip design if ohmic plate sensing is required Light Exposed Tip Medium Shielded Tip Heavy Whether you cut plate, HAC duct work or ornamental shapes, the Cutmaster Automation Series is right for you. Product Selection SPECIFICATIONS Gauge (0.5 mm 2 mm) Production Piercing & Cutting Capacity " ( mm) Cutmaster A Cutmaster A0 Cutmaster A Cutmaster A0 " ( mm) " ( mm) " ( mm) Sheet Metal Ductwork, Artwork, Trailer Panels Light Fabrication Kitchenware, Autobody Panels, Pipe Applications Medium Fabrication Industrial Components, Truck Frame & Body Heavy Fabrication Heavy Equipment Components, Structure Components, Pipe Duty High Production % Duty Cycle
We Bring Intelligence to the Table.TM Consumable Parts Maximum Life Shield Cup Deflector 9-8237 9-8243 Electrode Start Cartridge Tip 8-3484 O-Ring 8-348 O-Ring 9-8232 9-8277 9-85 (A) 9-8 (A) 9-8218 Ohmic Clip Shield Cap (Shielded Tip Cutting) 9-8224 9-82 (A) 9-8238 (50-0A) 9-8239 (70-0A) 9-825 (0A) 9-88 (A) 9-89 (50A) 9-82 (0A) 9-8231 (70A) 9-8211 (A) 9-82 (0A) 9-8233 (0A) 9-8237 9-8243 Accessories CNC Cables 25 ft (7. m) 9-08 35 ft (. m) 9-50 ft (.2 m) 9-11 1Torch Automation Leads Packages SL0 S 1 - (Torch/Leads) 25 ft (7. m) 7-01 75 ft (23 m) 7-04 35 ft (. m) 7-02 0 ft (.5 m) 7-05 50 ft (.2 m) 7-03 Hand Torches SL0 - (Torch/Leads) ft (.1 m) 7-54 50 ft (.2 m) 7-55 SL0 - (Torch/Leads) ft (.1 m) 7-5 50 ft (.2 m) 7-58 Single Stage Air Filter Kit Cat. No. 7-7507 (Filter Body 9-77, Hose 9-7742 (Filter Element 9-7741) Two Stage Air Filter Kit Cat. No. 9-9387 1st Stage Replacement Cartridge 9-21 2nd Stage Replacement Cartridge 9-22 Pinion Assembly Cat. No. 7-2827 (1 " (35 mm) Diameter) Remote Pendant Control Cat. No. 7-3 ft (.1 m) Remote Pendant Control for your mechanized application. Hand Pendant Extension Cat. No. 7-7744 25 ft (7. m)
ictor Thermal Dynamics introduces AUTOMATED PLASMA CUTTING Cutmaster A-Series Unit Specifications* Cutmaster A Cutmaster A0 Cutmaster A Cutmaster A0 Rated Output Amps 0 Amps Amps Output Range - Amps, 0 Amps Max., Adjustable - 0 Amps, Amps Max., Adjustable - Amps, 0 Amps Max., Adjustable - 0 Amps, 0 Amps Max., Adjustable Production Piercing and Cutting Capacity " ( mm) " ( mm) " ( mm) " ( mm) Maximum Piercing and Cutting Capacity " ( mm) " ( mm) 3/4" ( mm) 3/4" ( mm) 0 Amps Maximum Edge Start 1" (25 mm) 1" (25 mm) 1¼" ( mm) 1½" ( mm) Input olts 8-2/, 1/3 ph, 50/0 Hz 3/0, 3 ph, 50/0 Hz 00, 3 ph, 0 Hz 8-2/, 1/3 ph, 50/0 Hz 3/0, 3 ph, 50/0 Hz 00, 3 ph, 0 Hz 8-2/, 1/3 ph, 50/0 Hz 3/0, 3 ph, 50/0 Hz 00, 3 ph, 0 Hz 8-2/, 1/3 ph, 50/0 Hz 3/0, 3 ph, 50/0 Hz 00, 3 ph, 0 Hz Input Amps @ Max Output 47 (8, 1 ph) 2 (8, 3 ph) (2, 1 ph) 24 (2, 3 ph) 1 (3, 3 ph) 1 (0, 3 ph) 31 (, 1 ph) 1 (, 3 ph) 13 (00, 3ph) 75 (8, 1 ph) (8, 3 ph) 72 (2, 1 ph) 39 (2, 3 ph) 17 (3, 3 ph) 17 (0, 3 ph) 44 (, 1 ph) 21 (, 3 ph) 1 (00, 3 ph) 99 (8, 1 ph) 4 (8, 3 ph) 95 (2, 1 ph) 49 (2, 3 ph) 29 (3, 3 ph) 28 (0, 3 ph) 59 (, 1 ph) 29 (, 3 ph) 22 (00, 3 ph) (8, 1 ph) 1 (8, 3 ph) 118 (2, 1 ph) 5 (2, 3 ph) 35 (3, 3 ph) 3 (0, 3 ph) 7 (, 1 ph) 37 (, 3 ph) 28 (00, 3 ph) Kilowatt Output.3 kw 9 kw kw.4 kw Duty Cycle % @ Amps 0% @ Amps % @ 0 Amps 0% @ 50 Amps % @ Amps 0% @ 70 Amps % @ 0 Amps 0% @ 0 Amps 20 DC 20 DC 20 DC MAX OC 20 DC Gas Type Air @ 75 psi (5.2 bar) @.7cfm (189 lpm) Air @ 75 psi (5.2 bar) @.7cfm (189 lpm) Air @ 75 psi (5.2 bar) @.7cfm (189 lpm) Air @ psi (5.5 bar) @.7cfm (189 lpm) Weight 43 lbs (19.5 kg) - Unit, Power Cable, 43 lbs (19.5 kg) - Unit, Power Cable, 3 lbs (28. kg) - Unit, Power Cable, 3 lbs (28. kg) - Unit, Power Cable, Dimensions L 21.0" (533 mm) L 21.0" (533 mm) L 2.0" (0 mm) L 2.0" (0 mm) Work Cable ' (.1 m) ' (.1 m) ' (.1 m) ' (.1 m) Control Input Power Cable ' (3 m) with plug (8/2) ' (2 m) without plug (0) ' (3 m) with plug (8/2) ' (2 m) without plug (0) ' (3 m) with plug (8/2) ' (2 m) without plug (0) ' (3 m) with plug (8/2) ' (2 m) without plug (0) Warranty Certifications Torch Configuration Torch SL0 S w/ ATC, 1 Automation Ordering Information Please See Your ictor Thermal Dynamics Sales Representative for Specific System Configurations Systems include: power supply, automation torch with 1 " (35 mm) diameter non-metallic mounting tube/32 pitch rack (detachable), pinch block assembly, CNC interface cable, spare parts kit, input power cable (selected systems), work cable, and clamp. * Subject to change without notice (oltage): 3 = 3/0 3ph, 4 = 0 3ph CE, 5 = 00
ictor Thermal Dynamics introduces AUTOMATED PLASMA CUTTING Cutting Speed Chart For Cutmaster Systems Material Mild Steel Stainless Steel Aluminum Thickness (Inch) Speed (IPM) ga. 1 ga. 3/1 3/1 3/4 3/4 10 1 55 0 50 2 0 42 18 75 85 70 1 ga. 3/1 3/1 50 18 90 5 21 0 2 5 0 0 1 ga. 3/1 3/1 3/4 170 75 170 85 1 55 38 2 5 1 75 50 Amps Plasma /Shield 0 0 0 0 0 0 0 0 0 Thickness Speed (mm) mm/min. 1 2 3 5 4 3990 29 18 13 350 21 11 795 27 0 25 1790 13 490 1 13 7 2 3 5 4 11 9 7 285 1790 725 5 275 70 75 75 55 85 2390 1750 110 2 3 5 4 3500 2350 17 52 2 85 8 3190 13 0 7 75 55 470 20 14 NOTE: This cutting speed chart includes preliminary data and is subject to change without notice. 1TORCH, SL0S and ATC, trademarks of ictor Thermal Dynamics, are registered with the U.S. Patent and Trademark Office, and are the subject of trademark registrations and pending applications in numerous other countries. For information on trademark registrations of ictor Thermal Dynamics Corporation, contact the local trademark offices in the countries of interest. TM U.S. Customer Care: 8-279-228 Form No. 3-29CN (05/31/13) Canada Customer Care: 905-827- 13 ictor Technologies International, Inc. International Customer Care: 9-381- ictortechnologies.com Printed in U.S.A.