Standard Price List RENTAL PRICE LIST March 1, 2012 ENGINE DRIVEN WELDERS WEEKLY MONTHLY Air cooled 180 amp. 210.00 425.00 Air cooled 250 amp with running gear. 235.00 455.00 Air cooled propane 250 amp.. 260.00 535.00 Air cooled 250 amp on Trailer.. 290.00 530.00 Air cooled gasoline 300 amp tig cc/cv... 300.00 620.00 Water cooled gasoline 300 amp on trailer. 300.00 635.00 Water cooled gasoline 300 amp CV. 330.00 645.00 Water cooled gasoline 300 amp tig on trailer. 340.00 650.00 Water cooled diesel 300 amp on trailer. 340.00 630.00 Water cooled diesel 400 amp on trailer. 370.00 650.00 Water cooled diesel 400 amp c/v 425.00 680.00 Water cooled diesel 500 amp on trailer. 450.00 710.00 Water cooled diesel 500 amp cc/cv 500 amp.. 465.00 810.00 All tow behind units must be returned from rental with same amount of fuel as when delivered or a charge for fuel used will be added to final rental bill. PRICING FOR OPTIONAL EQUIPMENT ONLY WHEN RENTED WITH AN ACCOMPANING MACHINE Mig unit with gas drive rental 120.00 240.00 High frequency box 130.00 240.00 Water System 100.00 165.00 High freq. box with gas drive rental 120.00 200.00 1-lb. spool gun 130.00 250.00 Mig unit 1lb. spool gun w/box. 150.00 330.00 Push-Pull System w/gas drive 210.00 410.00 Tig Torch/Pedal/Gas Regulator.. 100.00 170.00 Renter is responsible for loss or damage beyond normal wear. Delivery charges vary with distance, size, and duration of rentals Delivery fees (if any) will be quoted at time of order. Page 1
Rental Price List March 1, 2012 C.C. "STICK " WELDERS WEEKLY MONTHLY PLASMA SYSTEMS 150 amp DC Inverter 115/230 volt 215.00 415.00 Inverter 200 amp 115/230/460 volt 220.00 420.00 225 amp AC/DC 230 volt 1 ph 190.00 360.00 250 amp AC/DC 208/230/460 volt 1 ph 210.00 425.00 Inverter 250 amp 208/230/460 volt 1 & 3 ph 235.00 425.00 Inverter 300 amp 230/460/575 volt 1 & 3 ph 240.00 445.00 Inverter 350 amp 230/460/575. 250.00 465.00 400 amp DC inverter 208/230/460 volt 1 & 3 ph. 260.00 475.00 300 amp DC 230/460/575 volt 3 ph 225.00 420.00 400 amp DC 230/460/575 volt 3 ph 220.00 455.00 400 amp multi process 230/460/575 volt 1 or 3 ph 240.00 510.00 500 amp DC 230/460/575 volt 3 ph 250.00 510.00 500 amp DC inverter 208/230/460 volt 1 & 3 ph. 275.00 495.00 600 amp DC 230/460/575 volt 3 ph 255.00 510.00 600 amp DC inverter 208/230/460 volt 1 & 3 ph. 290.00 525.00 600 amp multi process.. 275.00 580.00 650 amp DC 230/460/575 volt 3 ph 290.00 590.00 1000 amp DC 230/460/575 volt 3 ph 325.00 685.00 Stud welders 230-460 volt 1 & 3 ph. pricing varies with type 25 amp 115 volt 290.00 475.00 40 amp 230 volt 1 ph 295.00 510.00 50 amp 230-460 volt 1ph or 3 ph 355.00 640.00 80 amp 230/460 volt 1ph or 3 ph 390.00 695.00 100 amp 230/460 volt 3 ph 435.00 765.00 100 amp inverter 208/230/460 volt 1 & 3 ph. 450.00 800.00 150 amp 230/460 volt 3 ph 485.00 910.00 400 amp 230/460 volt 3 ph 690.00 1,340.00 Note: Consumables will be supplied with unit--sws will only invoice parts used. MULTI-OPERATOR SYSTEM Miller 4 pak DC 230/460/575 volt 3 ph.... 410.00 715.00 4 pak inverter 250 amp 230/460/575 volt. 435.00 750.00 4 pak inverter 300 amp 230/460 volt 450.00 765.00 4 pak inverter 400 amp 230/460 volt 3 ph 450.00 780.00 Miller 4 pak 300/400 amp DC 230/460/575 3 ph 425.00 750.00 Miller 6 pak DC 230/460/575 volt 3 ph 395.00 795.00 Miller 6 pak CC/CV 230/460/575 volt 450.00 850.00 6 pak inverter 250 amp CC 230/460 volt 480.00 930.00 6 pak inverter CC/CV 350 amp 230/460 volt 515.00 965.00 Miller 8 pak DC 230/460/575 volt 3 ph 425.00 840.00 Miller 8 pak Inverter 250 amp CC 230/460 volt 610.00 1,160.00 Junction Boxes (multiwelds).... 100.00 195.00 Multiwelds 220.00 450.00 Remote control with 100 foot cord (8 pak).. 90.00 195.00 Remote control extension 100' cord (8 pak). 115.00 145.00 Solid state remote control 100' cord (6 pak).. 100.00 155.00 Solid state extension 100' cord (6 pak). 100.00 155.00 Page 2
Rental Price List March 1, 2012 T.I.G. WELDERS WEEKLY MONTHLY 130 amp Econo TIG 220 volt 1 ph 195.00 400.00 150 amp DC 115 volt 220.00 410.00 200 amp AC/DC Tig 230 volt only. 260.00 525.00 200 amp AC inverter 115/208/230/460 volt 245.00 515.00 200 amp DC Inverter 115/208/230/460 volt 230.00 510.00 250 amp AC/DC 208/230/460 volt 1ph 265.00 530.00 250 amp DC Inverter 208/230/460 volt 1ph 275.00 545.00 250 amp Tig Runner 208/230/460 volt 1ph 295.00 590.00 300 amp AC/DC 208/230/460 volt 1ph 290.00 570.00 300 Amp Inverter 208/230/460 volt 1ph/3ph 305.00 595.00 350 amp Tig Runner 208/230/460 volt 1ph 315.00 600.00 500 amp AC/DC 208/230/460 volt 1ph 335.00 680.00 Water system radiator with tig unit 95.00 145.00 Water system only 140.00 250.00 High Freq Box Only 180.00 325.00 200 amp water cooled torch 105.00 150.00 300 amp water cooled torch 105.00 175.00 Foot pedal (when rented separately) 105.00 175.00 Hand control.. 105.00 165.00 Water cooled torches (when renting water system) Ground lead. Foot control & flow meter.. Spare parts kit Hand control (when renting machine).. Air-cooled Torch, pedal, flow meter, ground Extensions. (Call for quote--depends on length) M.I.G WELDERS 100 amp 115 volt 175.00 375.00 150 amp 230 volt 1 ph 195.00 400.00 200 amp 230/460 volt 3 ph with feeder 210.00 410.00 250 amp 230 volt 1 ph 215.00 425.00 250 amp 230/460 volt 1 ph with feeder 255.00 475.00 250 amp 230/460 volt 1 ph with spool gun 290.00 550.00 300 amp pulse inverter with feeder 385.00 720.00 300 amp 230/460 volt 3 ph with std. feeder 275.00 545.00 300 amp inverter with std. feeder. 305.00 605.00 300 amp inverter with spool gun or voltage sensing feeder 375.00 695.00 300 amp CV source with push/pull 380.00 770.00 300 amp inverter w/push-pull system.. 445.00 800.00 350 amp 230/460 volt 1-3 ph Millermatic 315.00 585.00 350 amp interter with feeder 230/460 volt 1-3 ph 335.00 595.00 400 amp CV source w/push pull. 430.00 790.00 400 amp 230/460 volt 3 ph with feeder 295.00 600.00 400 amp Multi-process w/feeder 320.00 625.00 450 amp CV source w/push pull.. 440.00 800.00 500 amp inverter with feeder 230-460 volt 1-3 ph 345.00 675.00 600 amp 230/460 volt 3 ph with feeder... 395.00 705.00 1000 amp with feeder 230-460 volt 3 ph 420.00 800.00 650 amp with feeder 230-460 volt 3 ph.. 415.00 735.00 1-lb. Spool gun only. 175.00 250.00 1-lb. Spool box accessory w/gun 220.00 400.00 Portable voltage sensing feeder 205.00 375.00 24 volt portable feeder. 225.00 390.00 Push-pull system 235.00 460.00 Optima pulse control only. 140.00 320.00 Flow meter Ground lead Substitute voltage sensing feeder for std. feeder Add.. 100.00 205.00 Page 3
Rental Price List March 1, 2012 SUB ARC FEEDERS WEEKLY MONTHLY LT-7 Tractor. 365.00 760.00 Extension Cords......60 per foot INDUCTION HEATING UNIT 25KW Min. 2 wks Monthly Includes: -Water System 2,700.00 3,700.00 -Cart -Lifting Eye Assembly -Thermocouple Attachment Unit -70' Liquid-Cooled Cable (leads) -Temperature Controller and Digital Recorder Additional Accessories to Rent: -Sheath Cable Covers 90.00 90.00-50' Thermocoupler Extension 90.00 90.00-50' Liquid-Cooled Cable Extensions 300.00 300.00 ** -Preheat Insulation Blankets 1/2" x 6" x 120 " (prices vary according to size, length and thickness) '1/2" x 12" x 170" (prices vary according to size, length and thickness) Note: Accessories must be returned undamaged to avoid additional charges Items Available for Purchase: -500' Spool Thermocoupler Wire Must Call -Thermocoupler Male Pins (10) for ** -Preheat Insulation Blankets 1/2" x 6" x 120" each Pricing ALL WELDING CABLE.... * * * (All cable must be returned as delivered, coiled and tied) additional gas hose...50 per foot.50 per foot OTHER EQUIPMENT Fume extractor (portable). 190.00 390.00 Plus Filters! Sizzor lift (32" x 20' ) Call for Pricing Skid loaders 125.00 (daily) 350.00 1,300.00 Call for attachments pricing. Air Compressors (185) 300.00 660.00 Renter is responsible for loss or damage beyond normal wear. Delivery charges vary with distance, size, and duration of rentals Delivery fees (if any) will be quoted at time of order. Page 4
Standard Price List POWER SOURCE REPAIR COMPANY RENTAL PRICE LIST March 1, 2010 New Tripoli, PA (Allentown) Collingdale, PA (Philadelphia) Office (610) 298-8475 Fax (610) 298-8326 Office (610) 532-6460 Fax (610) 534-4886 ENGINE DRIVEN WELDERS WEEKLY MONTHLY Air cooled 180 amp. 190.00 385.00 Air cooled 250 amp with running gear. 210.00 415.00 Air cooled propane 250 amp.. 240.00 485.00 Air cooled 250 amp on Trailer.. 265.00 490.00 Air cooled gasoline 300 amp tig cc/cv... 270.00 530.00 Water cooled gasoline 300 amp on trailer. 270.00 545.00 Water cooled gasoline 300 amp CV. 310.00 555.00 Water cooled gasoline 300 amp tig on trailer. 320.00 560.00 Water cooled diesel 300 amp on trailer. 315.00 575.00 Water cooled diesel 400 amp on trailer. 350.00 610.00 Water cooled diesel 400 amp c/v 400.00 640.00 Water cooled diesel 500 amp on trailer. 415.00 655.00 Water cooled diesel 500 amp cc/cv 500 amp.. 440.00 730.00 All tow behind units must be returned from rental with same amount of fuel as when delivered or a charge for fuel used will be added to final rental bill. PRICING FOR OPTIONAL EQUIPMENT ONLY WHEN RENTED WITH AN ACCOMPANING MACHINE Mig unit with gas drive rental 105.00 210.00 High frequency box 115.00 190.00 Water System 85.00 130.00 High freq. box with gas drive rental 100.00 160.00 1-lb. spool gun 110.00 200.00 Mig unit 1lb. spool gun w/box. 130.00 290.00 Push-Pull System w/gas drive 190.00 355.00 Renter is responsible for loss or damage beyond normal wear. Delivery charges vary with distance, size, and duration of rentals Delivery fees (if any) will be quoted at time of order. Page 1
Power Source Repair Company--Rental Price List March 1, 2010 C.C. "STICK " WELDERS WEEKLY MONTHLY PLASMA SYSTEMS 150 amp DC Inverter 115/230 volt 190.00 370.00 Inverter 200 amp 115/230/460 volt 200.00 275.00 225 amp AC/DC 230 volt 1 ph 160.00 325.00 250 amp AC/DC 208/230/460 volt 1 ph 185.00 370.00 Inverter 250 amp 208/230/460 volt 1 & 3 ph 210.00 390.00 Inverter 300 amp 230/460/575 volt 1 & 3 ph 220.00 410.00 Inverter 350 amp 230/460/575. 230.00 430.00 400 amp DC inverter 208/230/460 volt 1 & 3 ph. 240.00 440.00 300 amp DC 230/460/575 volt 3 ph 195.00 380.00 400 amp DC 230/460/575 volt 3 ph 200.00 420.00 400 amp multi process 230/460/575 volt 1 or 3 ph 220.00 465.00 500 amp DC 230/460/575 volt 3 ph 230.00 460.00 500 amp DC inverter 208/230/460 volt 1 & 3 ph. 250.00 455.00 600 amp DC 230/460/575 volt 3 ph 225.00 465.00 600 amp DC inverter 208/230/460 volt 1 & 3 ph. 260.00 480.00 600 amp multi process.. 250.00 540.00 650 amp DC 230/460/575 volt 3 ph 265.00 550.00 1000 amp DC 230/460/575 volt 3 ph 290.00 640.00 Stud welders 230-460 volt 1 & 3 ph. pricing varies with type 25 amp 115 volt 260.00 430.00 40 amp 230 volt 1 ph 270.00 460.00 50 amp 230-460 volt 1ph or 3 ph 335.00 600.00 80 amp 230/460 volt 1ph or 3 ph 365.00 665.00 100 amp 230/460 volt 3 ph 410.00 430.00 100 amp inverter 208/230/460 volt 1 & 3 ph. 420.00 765.00 150 amp 230/460 volt 3 ph 460.00 865.00 400 amp 230/460 volt 3 ph 640.00 1,230.00 Note: Consumables will be supplied with unit--psr will only invoice parts used. MULTI-OPERATOR SYSTEM Miller 4 pak DC 230/460/575 volt 3 ph.... 380.00 660.00 4 pak inverter 250 amp 230/460/575 volt.. 410.00 715.00 4 pak inverter 300 amp 230/460 volt.. 425.00 730.00 4 pak inverter 400 amp 230/460 volt 3 ph 430.00 745.00 Miller 4 pak 300/400 amp DC 230/460/575 3 ph. 400.00 715.00 Miller 6 pak DC 230/460/575 volt 3 ph. 375.00 765.00 Miller 6 pak CC/CV 230/460/575 volt. 425.00 810.00 6 pak inverter 250 amp CC 230/460 volt 455.00 895.00 6 pak inverter CC/CV 350 amp 230/460 volt 490.00 925.00 Miller 8 pak DC 230/460/575 volt 3 ph 400.00 800.00 Miller 8 pak Inverter 250 amp CC 230/460 volt 580.00 1,090.00 Junction Boxes (multiwelds).... 80.00 160.00 Multiwelds 190.00 415.00 Remote control with 100 foot cord (8 pak).. 62.00 115.00 Remote control extension 100' cord (8 pak). 95.00 115.00 Solid state remote control 100' cord (6 pak).. 75.00 125.00 Solid state extension 100' cord (6 pak). 75.00 125.00 Page 2
Power Source Repair Company--Rental Price List March 1, 2010 T.I.G. WELDERS WEEKLY MONTHLY 130 amp Econo TIG 220 volt 1 ph 175.00 360.00 150 amp DC 115 volt 190.00 370.00 200 amp AC/DC Tig 230 volt only. 240.00 490.00 200 amp AC inverter 115/208/230/460 volt 220.00 475.00 200 amp DC Inverter 115/208/230/460 volt 210.00 465.00 250 amp AC/DC 208/230/460 volt 1ph 240.00 795.00 250 amp DC Inverter 208/230/460 volt 1ph 255.00 510.00 250 amp Tig Runner 208/230/460 volt 1ph 275.00 550.00 300 amp AC/DC 208/230/460 volt 1ph 270.00 530.00 300 Amp Inverter 208/230/460 volt 1ph/3ph 280.00 555.00 350 amp Tig Runner 208/230/460 volt 1ph 290.00 565.00 500 amp AC/DC 208/230/460 volt 1ph 310.00 640.00 Water system radiator with tig unit. 75.00 115.00 Water system only 120.00 210.00 High Freq Box Only 160.00 290.00 200 amp water cooled torch 80.00 115.00 300 amp water cooled torch 80.00 135.00 Foot pedal (when rented separately). 80.00 135.00 Hand control.. 80.00 125.00 Water cooled torches (when renting water system) Ground lead. Foot control & flow meter.. Spare parts kit Hand control (when renting machine).. Air-cooled Torch, pedal, flow meter, ground Extensions. (Call for quote--depends on length) M.I.G WELDERS 100 amp 115 volt 155.00 330.00 150 amp 230 volt 1 ph 170.00 355.00 200 amp 230/460 volt 3 ph with feeder 185.00 365.00 250 amp 230 volt 1 ph 195.00 380.00 250 amp 230/460 volt 1 ph with feeder 230.00 430.00 250 amp 230/460 volt 1 ph with spool gun 265.00 515.00 300 amp pulse inverter with feeder 360.00 675.00 300 amp 230/460 volt 3 ph with std. feeder 260.00 210.00 300 amp inverter with std. feeder. 285.00 565.00 300 amp inverter with spool gun or voltage sensing feeder 345.00 650.00 300 amp CV source with push/pull 355.00 730.00 300 amp inverter w/push-pull system.. 420.00 765.00 350 amp 230/460 volt 1-3 ph Millermatic 290.00 540.00 350 amp interter with feeder 230/460 volt 1-3 ph 310.00 550.00 400 amp 230/460 volt 3 ph with feeder 270.00 560.00 400 amp Multi-process w/feeder 295.00 580.00 500 amp inverter with feeder 230-460 volt 1-3 ph 315.00 630.00 600 amp 230/460 volt 3 ph with feeder... 370.00 660.00 1000 amp with feeder 230-460 volt 3 ph 400.00 760.00 650 amp with feeder 230-460 volt 3 ph.. 395.00 700.00 1-lb. Spool gun only. 150.00 215.00 1-lb. Spool box accessory w/gun 190.00 355.00 Portable voltage sensing feeder 185.00 335.00 24 volt portable feeder. 200.00 345.00 Push-pull system 210.00 415.00 Optima pulse control only. 120.00 280.00 Flow meter Ground lead Substitute voltage sensing feeder for std. feeder Add.. 80.00 170.00
Page 3
Power Source Repair Company--Rental Price List March 1, 2010 SUB ARC FEEDERS WEEKLY MONTHLY LT-7 Tractor. 335.00 720.00 Extension Cords......60 per foot INDUCTION HEATING UNIT 25KW Min. 2 wks Monthly Includes: -Water System 2,700.00 3,700.00 -Cart -Lifting Eye Assembly -Thermocouple Attachment Unit -70' Liquid-Cooled Cable (leads) -Temperature Controller and Digital Recorder Additional Accessories to Rent: -Sheath Cable Covers 90.00 90.00-50' Thermocoupler Extension 90.00 90.00-50' Liquid-Cooled Cable Extensions 300.00 300.00 ** -Preheat Insulation Blankets 1/2" x 6" x 120 " (prices vary according to size, length and thickness) '1/2" x 12" x 170" (prices vary according to size, length and thickness) Note: Accessories must be returned undamaged to avoid additional charges Items Available for Purchase: -500' Spool Thermocoupler Wire Must Call -Thermocoupler Male Pins (10) for ** -Preheat Insulation Blankets 1/2" x 6" x 120" each Pricing ALL WELDING CABLE.... * * * (All cable must be returned as delivered, coiled and tied) additional gas hose...50 per foot.50 per foot OTHER EQUIPMENT Fume extractor (portable). 175.00 350.00 Sizzor lift (32" x 20' ) 75.00 (daily) 242.00 535.00 Skid loaders 75.00 (daily) 295.00 1,140.00 Call for attachments pricing. Air Compressors (185) 235.00 620.00 Renter is responsible for loss or damage beyond normal wear. Delivery charges vary with distance, size, and duration of rentals Delivery fees (if any) will be quoted at time of order. Page 4
Standard List POWER SOURCE REPAIR COMPANY RENTAL LIST March 1, 2005 New Tripoli (Allentown) Collingdale, PA (Philadelphia) Shop (610) 298-8475 Fax (610) 298-8326 Shop (610) 532-6460 Fax (610) 534-4886 Due to Length of Rentals and Accessories--Please Call for Price Quote ENGINE DRIVEN WELDERS Air cooled 150 amp Air cooled 250 amp with running gear Air cooled propane 250 amp Air cooled gasoline 300 amp tig Water cooled gasoline 300 amp on trailer Water cooled gasoline 300 amp CV Water cooled gasoline 300 amp tig on trailer Water cooled diesel 300 amp on trailer Water cooled diesel 400 amp on trailer Water cooled diesel w/cv Water cooled diesel 500 amp on trailer All tow behind units must be returned from rental with same amount of fuel as when delivered or a charge for fuel used will be added to final rental bill. PRICING FOR OPTIONAL EQUIPMENT ONLY WHEN RENTED WITH AN ACCOMPANING MACHINE Mig unit with gas drive rental High frequency box Water System High freq. box with gas drive rental 1-lb. spool gun Mig unit 1lb. spool gun w/box Push-Pull System w/gas drive Renter is responsible for loss or damage beyond normal wear. Two week rentals are subject to pick-up & delivery charge - minimum $25.00. Monthly rentals - no charge for pick-up or delivery. John McCaffrey - (610) 295-7632 Page 1
Power Source Repair Company--Rental List March 1, 2005 C.C. "STICK " WELDERS 150 amp DC Inverter 115/230 volt Inverter 200 amp 115/230/460 volt 225 amp AC/DC 230 volt 1ph 250 amp AC/DC 208/230/460 volt 1 ph Inverter 250 amp 208/230/460 volt 1 & 3 ph Inverter 300 amp 230/460/575 volt 1 & 3 ph 300 amp DC 230/460/575 volt 3 ph 400 amp DC 230/460/575 volt 3 ph 400 amp multi process 230/460/575 volt 1 or 3 ph 500 amp DC 230/460/575 volt 3 ph 600 amp DC 230/460/575 volt 3 ph 600 amp multi process Stud welders 230-460 volt 1 & 3 ph PLASMA SYSTEMS 25 amp 115 volt 40 amp 230 volt 1 ph 50 amp 230-460 volt 1 ph or 3ph 80 amp 230/460 volt 1ph or 3ph 100 amp 230/460 volt 3ph 150 amp 230/460 volt 3ph 400 amp 230/460 volt 3ph Note: Consumables will be supplied with unit--psr will only invoice parts used. MULTI-OPERATOR SYSTEM Miller 4 pak DC 230/460/575 volt 3 ph 4 pak inverter 250 amp 230/460/575 volt 4 pak inverter 300 amp 230/460 volt Miller 4 pak 300/400 amp DC 230/460/575 3 ph Miller 6 pak DC 230/460/575 volt 3 ph Miller 6 pak CC/CV 230/460/575 volt 6 pak inverter 350 amp 230/460 volt Miller 8 pak DC 230/460/575 volt 3 ph Remote control with 100 foot cord (8 pak) Remote control extension 100' cord (8 pak) Solid state remote control 100' cord (6 pak) Solid state extension 100' cord (6 pak) Page 2
Power Source Repair Company--Rental List March 1, 2005 T.I.G. WELDERS 130 amp Econo TIG 220 volt 1 ph 150 amp DC 115 volt 200 amp DC Inverter 115/208/230/460 volt 250 amp AC/DC 208/230/460 volt 1ph 300 amp AC/DC 208/230/460 volt 1ph 300 Amp Inverter 208/230/460 volt 1ph/3ph 350 amp Tig Runner 208/230/460 volt 1ph 500 amp AC/DC 208/230/460 volt 1ph Water system radiator with tig unit Water system only High Freq Box Only 200 amp water cooled torch 300 amp water cooled torch Foot pedal (when rented separately) Hand control Water cooled torches (when renting water system) Ground lead. Foot control & flow meter Spare parts kit Hand control (when renting machine) Air-cooled Torch, pedal, flow meter, ground Extensions M.I.G WELDERS 100 amp 115 volt 150 amp 230 volt 1 ph 200 amp 230/460 volt 3 ph with feeder 250 amp 230 volt 1 ph 250 amp 230/460 volt 1 ph with feeder 250 amp 230/460 volt 1 ph with spool gun 300 amp pulse inverter with feeder 300 amp 230/460 volt 3 ph with std. feeder 300 amp inverter with std. feeder 300 amp inverter with spool gun or voltage sensing feeder 300 amp CV source with push/pull 300 amp inverter w/push-pull system 400 amp 230/460 volt 3 ph with feeder 600 amp 230/460 volt 3 ph with feeder 1-lb. Spool gun only 1-lb. Spool box accessory w/gun Hefty cc/cv feeder Push-pull system Flow meter Ground lead Substitute voltage sensing feeder for std. feeder Page 3
Power Source Repair Company--Rental List March 1, 2005 Includes: INDUCTION HEATING UNIT 25KW -Water System -Cart -Lifting Eye Assembly -Thermocouple Attachment Unit -70' Liquid-Cooled Cable (leads) -Temperature Controller and Digital Recorder Additional Accessories to Rent: -Sheath Cable Covers -50' Thermocoupler Extension -50' Liquid-Cooled Cable Extensions ** -Preheat Insulation Blankets 1/2" x 6" x 120 " (Prices vary according to size, length, and thickness) '1/2" x 12" x 170" (Prices vary according to size, length, and thickness) Note: Accessories must be returned undamaged to avoid additional charges Items Available for Purchase: -500' Spool Thermocoupler Wire Must Call -Thermocoupler Male Pins (10) for ** -Preheat Insulation Blankets 1/2" x 6" x 120" each Pricing ALL WELDING CABLE * * * (All cable must be returned as delivered, coiled and tied) additional gas hose available OTHER EQUIPMENT Fume extractor (portable) Sizzor lift (32" x 20' ) Skid loaders Call for attachments pricing. Note: Delivery charges vary depending on Distance Page 4