MIDDLESEX COUNTY COLLEGE EDISON, NJ 08818 LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS The College is soliciting bids to award a Local Supplier Blanket Order agreement for the purchase of supplies for the period of July 1, 2015 through June 30, 2016. Quantities cannot be pre-determined and are to be released on a demand basis by our Facilities Department. Refer to attached list of items. If any item requires minimum packaged quantities, please indicate minimum quantities required next to the unit price column and also complete all necessary unit pricing on all indicated pages. The College cannot project volume in any category since purchases are on a demand basis as required. All items indicated have been selected for competitive pricing based on prior usage. In the event any of the items listed cannot be supplied in a reasonable time, the College will purchase these items from the next lowest supplier with consideration given to price and availability at the time. All prices quoted shall include freight or other charges incidental to the delivery of the items quoted, if applicable. If your firm is awarded this contract, a separate purchase order will be issued. Please direct all inquiries referencing the above bid number to the Director of Purchasing and Inventory, Mr. David Fricke, (732) 906-2519. Backorders must be delivered within 30 days. NOTE: Final award will be made to the most qualified local supplier(s) and will be based on the majority number of items and services that are determined to be the lowest unit price and/or discount. It is agreed and understood that all purchase orders issued during this contract period for those items not included in this list will also be priced and billed from the attached price schedule. The Director of Purchasing and Inventory or his assignee reserves the right to examine and audit invoices processed during the term of this contract. Any violation in this agreement may result in canceling this contract immediately and the difference charged back or credited for any disclosed item found to be incorrectly billed to the College.
MISCELLANEOUS ITEM Plumbing - LOCAL SUPPLIER RESPONSE SHEET Additional required materials, not incorporated in the specification of this Quotation, may be obtained from the Local Supplier. These discounts will remain in effect for the terms of this award. The college reserves the right to purchase related materials not included in this award at the lowest competitive prices at that time. Chicago Church Delta Elkay Fernco Harvey Tapes National Pipe Sloan Shark Bite Viega Ward MANUFACTURER DATE OF CURRENT PRICE LIST NOTE: This page is to be completed to be considered for an award. DISCOUNT
PVC PIPE, SCHEDULE 40 1 1-1/4" PVC Pipe, SCH 40, 20' feet 60 2 1-1/2" PVC Pipe, SCH 40, 20' feet 240 3 2" PVC Pipe, SCH 40, 20' feet 240 4 3" PVC Pipe, SCH 40, 20' feet 240 5 4" PVC Pipe, SCH 40, 20' feet 240 6 6" PVC Pipe. SCH 40, 20' feet 100 PVC FITTINGS, SCHEDULE 40 7 1-1/4" Adaptor S x FM each 5 8 1-1/2" Adaptor S x FM each 25 9 1-1/2" Adaptor S x M each 25 10 2" Adaptor S x FM each 25 11 2" Adaptor S x M each 25 12 1-1/4" Coupling S x S each 5 13 1-1/2" Coupling S x S each 25 14 2" Couplings S x S each 25 15 1-1/4" Reducer Coupling 1-1/4" x 1-1/2" each 5 16 1-1/2" Reducer Coupling 1-1/2" x 2" S each 5 17 1-1/2" Directional Tee T-Y 1-1/2" x 1-1/2" x 1-1/2" S each 25 18 2" Directional Tee T-Y 2" x 2" x 2" S each 25 19 1-1/2" 45 Degree El's S x S each 25 20 1-1/2" 90 Degree El's S x S each 25 21 2" 45 Degree El's S x S each 25 22 2" 90 Degree El's S x S each 25 23 1/2" PVC Check Valve S x S each 5 Page 1 of 18
24 3/4" PVC Check Valve S x S each 5 25 1" PVC Check Valve S x S each 5 26 1-1/4" PVC Check Valve S x S each 5 27 1-1/2" PVC Check Valve S x S each 5 28 1-1/4" Tee 1-1/4" x 1-1/4" x 1-1/4" S each 5 29 1-1/2" Tee 1-1/2" x 1-1/2" x 1-1/2" S each 25 30 2" Tee 2" x 2" x 2" S each 25 COPPER TUBING TYPE L 31 1/2" Copper Tubing 20' each 10 32 3/4" Copper Tubing 20' each 25 33 1" Copper Tubing 20' each 10 34 1-1/2" Copper Tubing 20' each 10 35 2" Copper Tubing 20' each 10 COPPER FITTINGS 36 1/2" Adaptors S x FM each 100 37 1/2" Adaptors S x M each 100 38 3/4" Adaptors S x FM each 50 39 3/4" Adaptors S x M each 50 40 1" Adaptor S x FM each 25 41 1" Adaptor S x M each 25 42 1-1/2" Adaptor S x FM each 25 43 1-1/2" Adaptor S x M each 25 44 2" Adaptor S x FM each 12 45 2" Adaptor S x M each 12 46 1/2" S x S Ball Valves each 50 Page 2 of 18
47 3/4" S x S Ball Valves each 50 48 1" S x S Ball Valves each 12 49 1-1/2" S x S Ball Valves each 12 50 2" S x S Ball Valves each 25 51 1/2" Cap S each 100 52 3/4" Cap S each 50 53 1" Cap S each 25 54 1/2" Coupling S x S each 100 55 3/4" Coupling S x S each 100 56 1" Coupling S x S each 25 57 1-1/2" Coupling S x S each 25 58 2" Coupling S x S each 25 59 1/2" Reducer Coupling 1/2" S x 3/4" S each 25 60 3/4" Reducer Coupling 3/4" x 1" S each 25 61 1" Reducer Coupling 1" x 1-1/2" S each 12 62 1-1/2" Reducer Coupling 1-1/2" x 2" S each 12 63 1-1/2" Directional Tee T-Y 1-1/2" x 1-1/2" x 1-1/2" S each 12 64 2" Directional Tee T-Y 2" x 2" x 2" S each 12 65 1/2" Tee 1/2" x 1/2" x 1/2" S each 50 66 3/4" Tee 3/4" x 1/2" x 3/4" S each 50 67 3/4" Tee 3/4" x 3/4" x 3/4" S each 50 68 1" Tee 1" x 1" x 1" S each 25 69 1" Tee 1" x 3/4" x 1" S each 25 70 1-1/2" Tee 1-1/2" x 1-1/2" x 1-1/2" S each 12 71 2" Tee 2" x 2" x 2" S each 25 Page 3 of 18
72 1/2" 45 Degree El's S x S each 12 73 1/2" 90 Degree El's S x S each 100 74 3/4" 45 Degree El's S x S each 100 75 3/4" 90 Degree El's S x S each 100 76 1" 45 Degree El's S x S each 25 77 1" 90 Degree El's S x S each 25 78 1-1/2" 45 Degree El's S x S each 25 79 1-1/2" 90 Degree El's S x S each 25 80 2" 45 Degree El's S x S each 25 81 2" 90 Degree El's S x S each 25 82 1/2" Plugs NPT Brass each 25 83 3/4" Plug NPT each 50 84 1" Plug NPT each 25 COPPER UNIONS 85 1/2" Union S x S each 25 86 3/4" Union S x S each 25 87 1" Union S x S each 25 88 1-1/2" Union S x S each 25 89 2" Union S x S each 25 SOFT COPPER ROLLS 90 1/4" OD Soft Copper Rolls 50' Length each 5 91 3/8" OD Soft Copper Rolls 50' Length each 5 92 1/2" OD Soft Copper Rolls 50' Length each 5 Page 4 of 18
BLACK MALLEABLE FITTINGS 93 1/2" 45 Degree El NPT each 25 94 1/2" 90 Degree El NPT each 25 95 3/4" 45 Degree El NPT each 25 96 3/4" 90 Degree El NPT each 25 97 1" 90 Degree El's NPT each 12 98 1" 45 Degree El's NPT each 12 99 1/2" Caps NPT each 25 100 3/4" Caps NPT each 25 101 1/2" Coupling each 25 102 3/4" Coupling each 25 103 1/2" Nipple 1/2" x 3" each 25 104 1/2" Nipple 1/2" x 4" each 25 105 1/2" Nipple 1/2" x 6" each 25 106 1/2" Nipple 1/2" x Close each 25 107 1/2" Nipple 1/2" x Short each 25 108 3/4" Nipple 3/4" x 4" each 25 109 3/4" Nipple 3/4" x 6" each 25 110 3/4" Nipple 3/4" x Close each 25 111 3/4" Nipple 3/4" x Short each 25 112 1" Nipple 1" x 4" each 142 113 1" Nipple 1" x 6" each 12 114 1" Nipple 1" x Close each 12 115 1" Nipple 2" x Short each 12 116 1/2" Pipe Union each 25 Page 5 of 18
117 3/4" Pipe Union each 25 118 1" Pipe Union each 12 119 1/2" Street El each 25 120 3/4" Street El each 25 121 1" Street El each 12 122 1/2" Tee 1/2" x 1/2" x 1/2" NPT each 25 123 3/4" Tee 3/4" x 3/4" x 3/4" each 25 124 1" Tee 3/4" x 3/4" x 1" each 12 125 1" Tee 1" x 1" x 3/4" each 12 126 1/2" to 3/4" Bushing NPT each 25 127 1" to 3/4" Reducer Bushing NPT each 12 COMPRESSION FITTINGS BRASS OD 128 Male IPS 1/4" x 1/2" Compression each 12 129 Male IPS 1/4" x 3/8" Compression each 12 130 Male IPS 1/4" x 1/4" Compression each 12 131 Male IPS 1/2" x 1/4" Compression each 12 132 Male IPS 1/2" x 3/4" Compression each 12 133 Male IPS 1/2" x 3/8" Compression each 12 134 Male IPS 3/8" x 1/2" Compression each 12 135 Male IPS 3/8" x 1/4" Compression each 12 136 Male IPS 3/8" x 3/4" Compression each 12 137 Male IPS 3/8" x 3/8" Compression each 12 138 Male IPS 3/4" x 1/2" Compression each 12 139 Male IPS 3/4" x 3/4" Compression each 12 Page 6 of 18
140 Black Iron Pipe 1/2" 21 ft length, Plain Ends each 10 141 Black Iron Pipe 3/4" 21 ft length, Plain Ends each 10 142 Black Iron Pipe 1" 21 ft length, Plain Ends each 10 143 Black Iron Pipe 1 1/4" 21 ft length, Plain Ends each 5 144 Black Iron Pipe 1 1/2" 21 ft length, Plain Ends each 5 145 Black Iron Pipe 2" 21 ft length, Plain Ends each 10 146 Brass Bushings Threaded 3/8" x 1/2" NPT each 12 147 Brass Bushings Threaded 1/2" x 3/4" NPT each 12 148 Brass Bushings Threaded 3/4" x 1" NPT each 12 149 Brass Bushings Threaded 1" x 1 1/4" NPT each 12 150 Brass Bushings Threaded 1 1/4" x 1 1/2" NPT each 12 151 Brass Bushings Threaded 1 1/2" x 2" NPT each 12 152 Brass Cap and Plugs Threaded 1/4" each 12 153 Brass Cap and Plugs Threaded 3/8" each 12 154 Brass Cap and Plugs Threaded 1/2" each 12 155 Brass Cap and Plugs Threaded 3/4" each 12 156 Brass Cap and Plugs Threaded 1" each 12 157 Brass Cap and Plugs Threaded 1 1/4" each 12 158 Brass Cap and Plugs Threaded 1 1/2" each 12 159 Brass Cap and Plugs Threaded 2" each 12 160 Brass Compression Unions OD 1/4" each 12 161 Brass Compression Unions OD 3/8" each 12 162 Brass Compression Unions OD 1/2" each 12 163 Brass Reducing Couplings 3/8" x 1/2" NPT Threaded each 12 164 Brass Reducing Couplings 1/2" x 3/4" NPT Threaded each 12 Page 7 of 18
165 Brass Reducing Couplings 3/4" x 1" NPT Threaded each 12 166 Brass Reducing Couplings 1" x 1/2" NPT Threaded each 12 167 Brass Reducing Couplings 1" x 1 1/4" NPT Threaded each 12 168 Brass Reducing Couplings 1 1/4" x 1 1/2" NPT Threaded each 12 169 Brass Reducing Couplings 1 1/2" x 1" NPT Threaded each 12 170 Brass Reducing Couplings 1 1/2" x 2" NPT Threaded each 12 171 Closet Spuds 3/4" x 1 1/2" each 12 172 Closet Spuds 1 1/4" x 1 1/4" each 12 173 Closet Spuds 1 1/2" x 1 1/4" each 12 174 Closet Spuds 2" x 1 1/4" each 12 175 Closet Spuds 2" x 1 1/2" each 12 176 Closet Spuds 2" x 2" each 12 177 Compression Caps Brass 3/8" each 12 178 Compression Caps Brass 1/2" each 12 179 Female IPS 1/8" x 1/4" Compression each 12 180 Female IPS 1/4" x 1/4" Compression each 12 181 Female IPS 1/4" x 3/8" Compression each 12 182 Female IPS 1/4" x 1/2" Compression each 12 183 Female IPS 3/8" x 1/4" Compression each 12 184 Female IPS 3/8" x 3/8" Compression each 12 185 Female IPS 3/8" x 1/2" Compression each 12 186 Female IPS 1/2" x 1/4" Compression each 12 187 Female IPS 1/2" x 3/8" Compression each 12 188 Female IPS 1/2" x 1/2" Compression each 12 189 Female IPS 3/4" x 1/2" Compression each 12 Page 8 of 18
190 Female IPS 3/4" x 3/4" Compression each 12 MISCELLANEOUS 191 Angle Stop, Chrome, 1/2 Sweat x 3/8 Compression each 50 192 Angle Stop, Chrome, 1/2 Threaded x 3/8 Compression each 50 193 Ball Valves, Compression, Brass, 1/2" each 25 194 Ball Valves, Compression, Brass, 3/4" each 25 195 Watts, Basket Strainer, item # 649006 each 12 196 Brass Cap with Rubber Washer and Garden Hose Threads, 3/4" each 50 197 Boiler Drain Valves 1/2" each 25 198 Boiler Drain Valves 3/4" each 25 199 Cleaning Brush, Copper Fitting, 1/2" each 25 200 Cleaning Brush, Copper Fitting, 3/4" each 25 201 Cleaning Brush, Copper Fitting, 1" each 12 202 Closet Bolts, Brass, 1/4" x 2 1/4" each 50 203 Closet Flange, 4", Cast Gasketed, No-Caulk each 5 204 Closet Flange, 4", Compression each 5 205 Closet Flange, 4", PVC Flanged each 5 206 Cock, Gas, Brass Threaded, 3/8" each 10 207 Cock, Gas, Brass Threaded, 1/2" each 10 208 Cock, Gas, Brass Threaded, 1" each 3 209 Cock, Still, Frost-Free, 3/4" x 1/2" Fip 12" each 5 210 Coupling, Tubular Brass, 1 1/2" x 1/2" each 12 211 Dielectric Isolation Unions, 1/2" x 1/2" NPT each 25 212 Dielectric Isolation Unions, 3/4" x 3/4" NPT each 25 213 Dielectric Isolation Unions, 1" x 1" NPT each 25 Page 9 of 18
214 Dielectric Isolation Unions, 1 1/4" x 1 1/4" NPT each 25 215 Dielectric Isolation Unions, 1 1/2" x 1 1/2" NPT each 25 216 Dielectric Isolation Unions, 2" x 2" NPT each 25 217 Double Slip Extension, Tubular Brass, 1 1/4" x 1 1/4" each 12 218 Extension Tube, Tubular Brass, Slip Joint, Extension Tube, 1 1/2" x 12" each 12 219 Eye Wash, Speakman, SE570LH each 3 220 Eye Wash, Speakman, SE570 each 3 221 Faucet, Chicago, # 897, Service Sink, RCF each 15 222 Faucet, Chicago, CH404A317 each 10 223 Faucet, Delta, Self Closing, Delta, item # 2507HDF each 15 224 Faucet, Delta, Single Lever, 400 Series, W/Spray Bar each 15 225 Faucet Riser, Chrome, 3/8" x 18" each 30 226 Flush Valve, Sloan, item # 110 each 12 227 Flush Valve, Sloan item #111 each 12 228 Flush Valve, Sloan, Repair Kit, item #V-551-A each 12 229 Flush Valve, Sloan, Repair Kit, item # R-1002-A each 12 230 Flush Valve, Sloan, EBV-500-A Electronic Flush each 12 231 Flush Valve, Sloan, Seal Kit, item # B-50A each 12 232 Grid Strainer, Chrome, with Tail Piece, 1 1/4" x 6 each 50 233 Grid Strainer, Chrome, with Tail Piece, 1 1/2" x 6 each 50 234 Hanger Bracket, Clevis, Copper, 1/2" each 50 235 Hanger Bracket, Clevis, Copper, 3/4" each 50 236 Hanger Bracket, Clevis, Copper, 1" each 25 237 Hanger Bracket, Clevis, Copper, 1 1/4" each 25 238 Hanger Bracket, Clevis, Copper, 1 1/2" each 25 Page 10 of 18
239 Hanger Bracket, Clevis, Copper, 2" each 25 240 Hanger Bracket, Clevis, Steel, 1/2" each 50 241 Hanger Bracket, Clevis, Steel, 3/4" each 50 242 Hanger Bracket, Clevis, Steel, 1" each 25 243 Hanger Bracket, Clevis, Steel, 1 1/4" each 25 244 Hanger Bracket, Clevis, Steel, 1 1/2" each 25 245 Hanger Bracket, Clevis, Steel, 2" each 25 246 Hanger Rolls, Band Iron, Copper 10 foot each 12 247 Hanger Rolls, Band Iron, Galvanized 10 foot each 12 248 Lever, Tank, CP Standard each 25 249 Nipple Runs, Brass, 3/8" each 5 250 Nipple Runs, Brass, 1/2" each 5 251 Nipple Runs, Brass, 3/4" each 5 252 Nipple Runs, Brass, 1" each 5 253 Nipple Runs, Brass, 1 1/4" each 5 254 Nipple Runs, Brass, 1 1/2" each 5 255 Nipple Runs, Brass, 2" each 5 256 Outlet Wax, Urinal, Gasket # 6 each 12 257 Plumber's Roll, Medium, 1-1/2" x 25 yd/roll roll 25 258 PVC Glue quart 5 259 PVC Primer, Clear quart 5 260 PVC Primer, Purple-Coding quart 5 261 Repair Kit, Delta, # 3614 each 25 262 Replacement Snake 3/8" x 75' For Ridgid/Koilman Drum each 15 263 Replacement Snake 1/2" x 75' For Ridgid Koilman Drum each 15 Page 11 of 18
264 Replacement Snake 1/4" x 25' For Ridgid Koilman Drum each 15 265 Replacement Snake 1/4" x 50' For Ridgid Koilman Drum each 15 266 Rubber Connectors, Fernco, 90 1 1/2" each 25 267 Rubber Connectors, Fernco, 90 2" each 25 268 Rubber Connectors, Fernco, Couplings, 1 1/2" each 25 269 Rubber Connectors, Fernco, Couplings, 2" each 25 270 Rubber Connectors, Fernco, Couplings, 3" each 25 271 Rubber Connectors, Fernco, Couplings, 4' each 25 272 Rubber Connectors, Fernco, Reducer, 2" x 1/2" each 12 273 Rubber Connectors, Fernco, Tees, 1 1/2" x 1 1/2" x 1 1/2" each 12 274 Rubber Connectors, Fernco, Tees, 2" x 2" x 2" each 12 275 Solder, Flux, 1 lb/can can 3 276 Solder, Lead Free, 95/5, 1 lb/can can 25 277 Straight Stop, Chrome, 1/2 Sweat x 3/8 Compression each 12 278 Straight Stop, Chrome, 1/2 Threaded x 3/8 Compression each 12 279 Straps, Copper, 2 Holed, 1/2" each 25 280 Straps, Copper, 2 Holed, 3/4" each 25 281 Straps, Copper, 2 Holed, 1" each 25 282 Straps, Copper, 2 Holed, 1 1/4" each 25 283 Straps, Copper, 2 Holed, 1 1/2" each 25 284 Straps, Copper, 2 Holed, 2" each 25 285 Supply Tubes, Braided Stainless Steel, 12" x 1/2" Fip x 3/8 OD Flair each 25 286 Supply Tubes, Braided Stainless Steel, 16" x 3/8" OD Comp x 3/8" Comp each 25 287 Supply Tubes, Braided Stainless Steel, 16" x 1/2" Fip x 3/8 OD Flair each 25 288 Supply Tubes, Braided Stainless Steel, 20" x 3/8" OD Comp x 3/8" Comp each 25 Page 12 of 18
289 Supply Tubes, Braided Stainless Steel, 20" x 1/2" Fip x 3/8 OD Flair each 25 290 Tailpiece, Tubular Brass, 1 1/2" x 12" each 12 291 Tailpiece Tube, Tubular Brass, 1 1/2" x 12" each 12 292 Tape, Teflon, 1/2" x 520" roll 12 293 Teflow Paste, Liquid, Quart each 3 294 Test Plug, Wing Nut, Plastic, 1 1/4" each 12 295 Test Plug, Wing Nut, Plastic, 1 1/2" each 12 296 Test Plug, Wing Nut, Plastic, 2" each 12 297 Test Plug, Wing Nut, Plastic, 3" each 12 298 Test Plug, Wing Nut, Plastic, 4" each 12 299 Toilet Seat, Church, item # 255C each 25 300 Trap, 1 1/2", 20 GA CP P each 25 301 Trap, Chrome, 1-1/2" "P" each 25 302 Trap, PVC, 1-1/2" "P" each 25 303 Trap Adaptor, 1 1/2", Copper DWV x Slip each 25 304 Tubing, Pex 3/8" 50' Rolls each 5 305 Tubing, Pex 1/2" 50' Rolls each 5 306 Tubing, Pex 3/4" 50' Rolls each 5 307 Tubing, Pex 1" 50' Rolls each 5 308 Washers, Hose, 10/pkg pkg 3 309 Waste Assembly, Pop-Up, Spud and Stopper, 1 1/4" each 25 310 Water Cooler, Elkay, EHFSA-8-SC S/S ADA EWC each 2 311 Water Cooler, Elkay, model # EZSTL8C each 2 SHARKBITE FITTINGS 312 SharkBite Ball Valves 1" #22223-0000 each 15 Page 13 of 18
313 SharkBite Ball Valves 1/2" #22222-0000 each 15 314 SharkBite Ball Valves 3/4" #22185-0000 each 15 315 SharkBite Straight Connector 3/4" x 3/4" MNPT #U134 each 15 316 SharkBite Disconnect Clips 1" #U714 each 15 317 SharkBite Disconnect Clips 1/2" #U710 each 15 318 SharkBite Disconnect Clips 3/4" #U712 each 15 319 SharkBite Disconnect Clips 3/8" #U708 each 15 320 SharkBite Disconnect Tong 1" #U715 each 15 321 SharkBite Disconnect Tong 1/2" #U711 each 15 322 SharkBite Disconnect Tong 3/4" #U713 each 15 323 SharkBite Drop Ear Elbow 1/2" x 1/2" FNPT #U334 each 15 324 SharkBite Drop Ear Elbow 1/2" x 1/2" #U249 each 15 325 SharkBite Drop Ear Elbow 3/4" x 3/4" FNPT #U340 each 15 326 SharkBite Drop Ear Elbow 3/8" x 1/2" #U332 each 15 327 SharkBite Elbow 90 Degree 1" x 1" #U260 each 15 328 SharkBite Elbow 90 Degree 1/2" x 1/2" #U248 each 15 329 SharkBite Elbow 90 Degree 3/4" x 3/4" #U256 each 15 330 SharkBite Elbow 90 Degree 3/8" x 3/8" #U246 each 15 331 SharkBite End Stops 1" #U520 each 15 332 SharkBite End Stops 1/2" #U514 each 15 333 SharkBite End Stops 3/4" #U518 each 15 334 SharkBite End Stops 3/8" #U512 each 15 335 SharkBite Hy Ear Elbow 1/2" X 1/2" FNPT #U335 each 15 336 SharkBite Reducing Connector 1/2" x 3/4" FNPT #U068 each 15 337 SharkBite Reducing Connector 1/2" x 3/4" MNPT #U116 each 15 Page 14 of 18
338 SharkBite Reducing Connector 3/8" x 1/2" FNPT # U719 each 15 339 SharkBite Reducing Connector 3/8" x 1/2" MNPT #U118 each 15 340 SharkBite Reducing Couplings 1" x 3/4" #U060 each 15 341 SharkBite Reducing Couplings 1/2" x 1" #U722 each 15 342 SharkBite Reducing Couplings 3/4" x 1" #U724 each 15 343 SharkBite Reducing Couplings 3/4" x 1/2" #U058 each 15 344 SharkBite Reducing Couplings 3/8" X 1/2" #U009 each 15 345 SharkBite Reducing Couplings 3/8" x 3/4" #U721 each 15 346 SharkBite Reducing Tee 1" x 1" x 3/4" #U416 each 15 347 SharkBite Reducing Tee 1/2" x 1/2" x 3/8" #U363 each 15 348 SharkBite Reducing Tee 3/4 "x 3/4" x 1/2" #U412 each 15 349 SharkBite Reducing Tee 3/4" x 1/2" x 1/2" #U454 each 15 350 SharkBite Reducing Tee 3/4" x 1/2" x 3/4" #U444 each 15 351 SharkBite Safe Seal Tool 1/2", 1", 3/4" #U702 each 15 352 SharkBite Straight Connectors 1" x 1" FNPT #U094 each 15 353 SharkBite Straight Connectors 1" x 1" MNPT #U140 each 15 354 SharkBite Straight Connectors 1" x 1" #U020 each 15 355 SharkBite Straight Connectors 1/2" X 1/2" FNPT #U072 each 15 356 SharkBite Straight Connectors 1/2" x 1/2" MNPT #U120 each 15 357 SharkBite Straight Connectors 3/4" x 3/4" FNPT #U088 each 15 358 SharkBite Straight Connectors 3/4" x 3/4" #U016 each 15 359 SharkBite Straight Couplings 1/2" x 1/2" #U008 each 15 360 SharkBite Straight Couplings 3/8" x 3/8" #U006 each 15 361 SharkBite Tee 1" x 1" x 1" #U374 each 15 362 SharkBite Tee 1/2" x 1/2" x 1/2" #U362 each 15 Page 15 of 18
363 SharkBite Tee 3/4" x 3/4" x 3/4" #U370 each 15 364 SharkBite Tee 3/8" x 3/8" x 3/8" #U360 each 15 RIDGID PRO PRESS FITTINGS (COPPER) 365 90 Degree Elbow 1/2" #77317 each 15 366 90 Degree Elbow 3/4" #77322 each 15 367 90 Degree Elbow 1" #77327 each 15 368 90 Degree Elbow 1 1/4" #77332 each 15 369 90 Degree Elbow 1 1/2" #77337 each 15 370 90 Degree Elbow 2" #77342 each 15 371 Caps 1/2" #77712 each 15 372 Caps 3/4" #77717 each 15 373 Caps 1" #77722 each 15 374 Caps 1 1/4" #77727 each 15 375 Caps 1 1/2" #77732 each 15 376 Caps 2" #77737 each 15 377 Reducing Couplings 1/2" x 3/4" #78147 each 15 378 Reducing Couplings 3/4" x 1" #78152 each 15 379 Reducing Couplings 1" x 1 1/4" #78157 each 15 380 Reducing Couplings 1 1/4" x 1 1/2" #78162 each 15 381 Reducing Couplings 1 1/2" x 2" #78167 each 15 382 Reducing Tees 3/4" x 3/4" x 1/2" #77402 each 15 383 Reducing Tees 1" x 1" x 3/4" #77437 each 15 384 Reducing Tees 1 1/4" x 1 1/4" x 1" #77447 each 15 385 Reducing Tees 1 1/2" x 1 1/2" x 1 1/4" #77472 each 15 386 Reducing Tees 2" x 2" x 1 1/2" #77482 each 15 Page 16 of 18
387 Male x Slip Adapters 1/2" x 1/2", Threaded Bronze Fittings #77962 each 15 388 Male x Slip Adapters 3/4" x 3/4", Threaded Bronze Fittings #77977 each 15 389 Male x Slip Adapters 1" x 1",Threaded Bronze Fittings #77982 each 15 390 Male x Slip Adapters 1 1/4" x 1 1/4", Threaded Bronze Fittings #77987 each 15 391 Male x Slip Adapters 1 1/2" x 1 1/2", Threaded Bronze Fittings #77992 each 15 392 Male x Slip Adapters 2" x 2", Threaded Bronze Fittings #77997 each 15 393 Female x Slip Adapters 1/2" x 1/2", Threaded Bronze Fittings #78007 each 15 394 Female x Slip Adapters 3/4 x 3/4, Threaded Bronze Fittings #78022 each 15 395 Female x Slip Adapters 1" x 1", Threaded Bronze Fittings #78027 each 15 396 Female x Slip Adapters 1 1/4" x 1 1/4", Threaded Bronze Fittings #78032 each 15 397 Female x Slip Adapters 1 1/2" x 1 1/2", Threaded Bronze Fittings #78037 each 15 398 Female x Slip Adapters 2" x 2", Threaded Bronze Fittings #78042 each 15 399 Straight Couplings 1/2" #78172 each 15 400 Straight Couplings 3/4" #78177 each 15 401 Straight Couplings 1" #78182 each 15 402 Straight Couplings 1 1/4" #78187 each 15 403 Straight Couplings 1 1/2" #78192 each 15 404 Straight Couplings 2" #78197 each 15 405 Ball Valves 1/2" #22053 each 15 406 Ball Valves 3/4" 22058 each 15 407 Ball Valves 1" 22063 each 15 408 Ball Valves 1 1/4" #22068 each 15 409 Ball Valves 1 1 /2" #22073 each 15 410 Ball Valves 2" #22078 each 15 411 Tees 1/2" #77377 each 15 Page 17 of 18
412 Tees 3/4" #77387 each 15 413 Tees 1" #77412 each 15 414 Tees 1 1/4" #77442 each 15 415 Tees 1 1/2" #77457 each 15 416 Tees 2" #77477 each 15 Page 18 of 18