riton overhead door controls riton overhead door controls portfolio of door control solutions from the UK s most trusted brand model to suit all applications and budgets The riton overhead door closer range provides a multi-level approach to door closing solutions to suit all projects, door applications and budgets. rom the simplicity of a mechanical non-fire door closer for basic functionality, to a microprocessor controlled low energy operator for special applications e.g. for doors required to satisfy Part M of the uilding Regulations, there are riton products to meet your needs. eavy duty The riton 30 is a high performance, adjustable power overhead closer with various design options including slide track and electro-magnetic hold-open. vailable in a choice of covers and finishes. Medium duty The riton 00 and 000 Series of classic medium duty closers offer fixed and adjustable power closers with a choice of covers and finishes. Specifying a riton door control The qualities ct - disability legislation When specifying a riton door closer you can be Legislation aimed at providing universal accessibility assured that an uncompromising attention to of buildings requires service providers to make detail has been given to every stage of its design "reasonable adjustments to the physical features of and manufacture. This ensures that its products their premises to overcome barriers to access. and systems meet the highest possible quality and conformity certifications and exceed the requirements of all applicable uropean Standards. pproved oc M of the uilding Regulations and S 8300 provide guidance in establishing recommended opening forces for door controls to assist less able global leader in every sense of the word, llegion users. has an unrivalled track record in satisfying the demands of architects, designers, specifiers and building contractors throughout the world. llegion (UK) Ltd manufactures a portfolio of market leading products, including riton, the UK s number one brand of door controls. riton is the UK s number one brand of door closer and is a name synonymous with high quality design, reliability and durability. llegion is at the forefront of supplying products that meet the new uropean PR requirements, such as one of the first ranges of marked fire exit hardware and door controls. igh efficiency riton closers which are capable of meeting the required levels of opening and closing forces are marked with the "Wheelchair Symbol" but accurate installation, hinge friction, door seals and variable air pressure can all have a bearing on the opening resistance of the final doorset. or doors which must also meet the stringent closing force requirements for fire door applications, it may be more appropriate to use electro-magnetic hold open or swing free closers or a powered opening solution. Medium duty The riton 00 Series medium duty closer range offers multiple design options which can be co-ordinated across a broad range of performance requirements including electromagnetic hold-open. Medium duty The riton 996 Series is a dedicated electro-magnetic hold-open/swing-free fixed power door closer range. urther information on marking and ertifire certificates can be found on our website at: www.allegion.co.uk/downloads and click on Test See also our ranges of high ertificates. performance surface mounted and concealed cam action door closers. or eclaration of Performance please go to: www.britondops.co.uk Medium duty The riton 800 Series floor spring provides fixed power solutions for high Light duty The riton is a light duty budget closer option, providing basic operational traffic single or double action applications or where a characteristics in a compliant closer. surface mounted closer may be subject to abuse.
riton 00 Series -eavy to medium duty riton 00 Series - eavy to medium duty riton 00 Series - offering the highest quality of performance and design choice The riton 00 Series of door controls has been created to offer a comprehensive package of solutions to suit any door closing application. eveloped in conjunction with installers, the 00 Series builds on the engineering excellence of previous riton door controls by incorporating one of the simplest, quickest and most accurate installation systems available. This combination of engineering quality and good looks - with three body cover options and a variety of finishes - creates a truly versatile architectural solution for any heavy to medium duty application. eatures & enefits ast aluminium body (0/0) or cast iron body (30) giving rugged durability. ardened steel rack and pinion mechanism with needle roller bearings for exceptionally smooth and efficient operation and high levels of durability. oil springs manufactured in silicon chrome alloy steel for superior strength and reliability. igh quality hydraulic fluid with in-built temperature compensation ensures reliable operation in temperatures from - to +40. ll-over cover conceals all fixings and adjustment screws to prevent tampering. hoice of cover options in a range of architectural finishes with matching arms. Unique ccufit backplate system reduces installation time and dramatically improves accuracy of fitting. Spring power adjustable depending on model from N - 6 (see table on page 3) avoids the need to predetermine the door details at the point of specification and allows for site variations. The highly versatile 00 Series was developed with installers to combat the practical and economic concerns with conventional door closer installation. s a result, the riton 00 Series can demonstrate an average 30-3% labour saving on installation. ut the benefits are much deeper than this. The increased degree of accuracy achieved when installing a riton 00 Series closer dramatically improves its efficiency and longevity. Pre-assembled arm and bracket simplifies assembly, increasing speed and accuracy. Quick release arm assembly allows the closer to be disconnected and reconnected quickly without the need to alter the arm arrangement. This speeds up the installation process and enables the closer body and bracket to be fixed independently allowing for much greater accuracy. 0 3 lso available as a slide track closer. Wind through power adjustment. djustable closing speed and... djustable latch action provides total control of the full closing cycle.* djustable backcheck (except 0) minimises the risk of personal injury and damage to adjacent walls, door, frame and other door hardware.* The riton 00 Series is marked to N 4 (additional N for electronic variants), fire tested to N 634 and ertifire pproved for use on timber doors to achieve a hour fire rating, and up to 4 hour for steel doors. 3 4 0 4 djustable delayed action (30 only) delays the closing cycle to allow slow moving pedestrians to pass through unhindered by the closing door.** Optional hold-open armset is adjustable from 80 to 80 opening angle (except for 30 fitted in regular application which has an opening angle of 80-30 ). Not to be used on fire door applications. * Please note, the location of adjustment [except 30] screws differs on some closers. ** Not suitable for fire doors.
riton 00 Series - djustments riton 00 Series - Installation cast iron body variant cast iron body variant The location of adjustment screws differs from the aluminium and cast iron body variants. Mechanical hold-open unit Mechanical hold-open is achieved by substituting the standard armset with a hold-open armset. It enables doors to be securely held in the open position at the required pre-set angle (adjustable on installation between 80 and 80 depending on model and the mounting application). The hold-open facility can be easily overridden and the force required to release the hold-open action can be adjusted to suit the weight of door. Please note, mechanical hold-open is not permitted on fire door applications. loser adjustments djustable closing power The innovative 'ST Powerdjust' mechanism provides a visual guide on the N power level at which the closer has been adjusted. djustable closing speed djustable from 80 opening through to the final. djustable latch action The speed of closing in the last can be adjusted to overcome seals and latches. djustable backcheck To prevent damage to the door, hardware and adjacent walls, caused by the door being flung open or caught by a gust of wind. djustable delayed action The closer can be set to close more slowly to give people extra time to pass through the doorway. djustable timing between 70 and 0. djustable hold-open Mechanical and electromagnetic hold-open variants are available to hold the door in the open position. Mechanical hold-open - 80-80 lectro-magnetic hold-open: 80 0 0 check specification 8-0 available in door mount pull applications. 7-00 available in door mount push applications. 70 80 0 3 4 ccufit by name, ccufit by nature The cost associated with inaccurate fixing of a door closer can be of significant proportions, particularly when it has a knock-on effect on the other hardware on the door, the door itself and the surrounding structure. t llegion we identified that 9% of all problems associated with door closers were due to incorrect installation rather than a fault in the closer itself. The ccufit System was designed to address this deficiency and provides real term benefits far beyond the simple savings in installation time. The life of the product is greatly enhanced by being fitted accurately and has a beneficial effect on the operation of the whole door. The riton ccufit system in action The essence of the ccufit System is to allow quick and accurate installation and uses: unique low-tac self adhesive template which is stuck to the door and frame and allows all the fixing points to be pre-drilled. mounting backplate which is fixed to the door, avoiding the need to support the weight of the closer body when fitting. Pre-assembled arm and bracket which speed up the assembly procedure. Quick release armset allows the primary arm to be connected to the closer and the secondary arm and bracket to be mounted without having to preload the closer spring.
riton 00 Series - esign options riton 00 Series - esign options ombining high performance with a variety of design options to suit all applications The riton 30.T and its electro-magnetic holdopen variant the riton 30.T (overleaf) are slide track closers. The single arm arrangement utilises a shallow slide track which avoids the need for projecting arms. With the closer fixed to the door and the track fitted to the head frame they are particularly suited to narrow transoms. The exclusion of projecting arms makes slide track closers particularly appropriate in applications which may be susceptible to vandalism and misuse and they are often specified for higher quality installations because of the improved aesthetics provided by the neat, uncomplicated track. Within the riton 00 Series there are a number of options to choose from to suit your application. These include: Projecting arm or slide track options which provide a neat architectural look and reduce the chances of misuse. Three cover options available, the rounded L cover and the gently curved S cover which are available on all 00 closers and the lassic riton cover which is available on 30 variants only. overs are available in a number of finishes with matching arms and bracket or track (see page 39 for a full list of available finishes). lectro-magnetic slide track hold-open option. bove: riton 0 with L cover in polished stainless steel elow: riton 0 with S cover in satin stainless steel Top: riton 30.T slide track variant with S cover in satin stainless steel entre: riton 30.T with lassic cover in satin stainless steel ottom: riton 30 with lassic cover in SS sprayed silver finish with matching arms and bracket
riton 00 Series - lectro-magnetic hold-open riton 00 Series - pplications or fire door applications which are required to be held open, or for applications requiring ease of access, the riton 30.T electro-magnetic hold-open closer is ideal. riton 00 Series closers are supplied as standard with a tri-pack containing arms and brackets suitable for mounting in regular, transom and parallel applications as shown below (illustrated with L cover and scissor arm). The door and frame size parameters are shown below. Please note the variation when used in conjunction with the optional hold-open armset. riton 30.T with L cover in satin stainless steel Regular application Transom application Parallel application n electromagnet in the slide track is designed to hold the door open during normal use and is connected to the building fire alarm system. On sounding the fire alarm, or in the event of power failure, the electromagnet is deactivated and releases the door closer mechanism to close the door in the normal controlled manner. It is particularly suited for use in areas where a standard door closer could be inconvenient or would impede the flow of people in medium or high traffic applications such as a cinema foyer or hospital corridor. The use of electro-magnetic hold-open door controls are recommended in applications which are designed to meet the levels of accessibility called for in pproved ocument M ccess to and use of buildings. eatures of the riton 30.T closer esigned to, and compliant with, N, the most recent legislation for performance, reliability and safety. Satisfies the requirements of pproved ocument M ccess to and use of buildings ail safe electronics guarantee door release in the event of a fire or power failure. Track mounted 4v solenoid with an effective and reliable holding force. Manual override allows the door to be pulled closed at any time. On-board test switch simulates fire condition to check operation. ully adjustable hold-open angle from 8 to 0. 4v transformer/rectifier available. Integrated design When compared to the use of a standard closer and separate electomagnetic door holder the integrated riton 30.T has the following benefits: Reduced installation time and cost. Less susceptible to malicious damage. nsures twisting forces on the door leaf are eliminated. esthetically superior as it avoids intrusive bracketry and other components on the door. an be used where there is no reveal wall. Power requirements The closer power requirements are 4V, 90m nominal. Transformers and relay interfaced to the fire alarm system can also be supplied to link the electricity supply and the fire alarm system. k - min j - min c - min b - min losers with scissor arms (all cover options shown) a - max Regular application Transom application losers with track arms (all cover options shown) l - max i - max closer ref. body cover a b c d e f g h closer ref. d - min e - min Low eiling Low eiling n - min m - min o - min body cover f - min h - min g - min Parallel application Low eiling q - min p - min r - min oor mounted - pull side Transom mounted - push side Transom mounted - pull side i j k l m n o p q r SR transformer/rectifier or use with fire/smoke check electro-magnetic door control units where 4V is not available for the continuous rating required. socket is provided to accept a plug-in relay. 0 0 30 30 L 0 6(39) 6 8(39) 6 44 99() S 0 6(39) 74 8(39) 74 44 (4) 7 8(4) 78 8(4) 0 68 44 94(07) L 7 8(4) 78 30(43) 78 44 7(30) S 7 8(4) 78 30(43) 78 44 7(30) 30.T 30.T 4 78 76 4 78 7 9 L 4 78 76 4 78 7 9 S 4 78 76 4 78 7 9 please note; the figures in brackets refer to dimensions when used with mechanical hold-open armsets
riton 00 Series - loser dimensions riton 00 Series - Specifications loser with scissor arm & lassic cover Specification The riton 00 Series is marked to N 4 (see table) and certified to N 634 (fire) and N (electromechanical hold-open variant). djustable N power sizes up to N 6. ertifire pproved () for use on timber fire doors up to hr and steel doors up to 4hr (except 30 and all 30 closers with lassic cover). ie cast aluminium or cast iron mechanism body with hardened rack and pinion mechanism. ccufit Installation self-adhesive template and first fix mounting plate for easy installation. ackcheck and delayed action. loser with scissor arm & L or S cover Optional mechanical and electro-magnetic hold-open facility. Projecting arm and slide track configurations available. 0 year performance guarantee for reassurance. year electrical guarantee. Product features Product references N loser size max. door size [width - weight] 0 0 30 30 30.T 30.T 70mm - 0kg loser with track arm and L, S or lassic cover 490 80mm - 40kg 3 90mm - 60kg 4 00mm - 80kg loser with electro-magnetic track arm and L, S or lassic cover 0 0 78 0mm - 00kg 6 400mm - 0kg marked * Variable closing power N size - 4-4 - 6-6 - 4 3-4 Power adjustment by spring or template template spring spring spring spring spring ccufit template & ccufit mounting plate Max. angle of opening (controlled closing) 80 80 80 80 80 0 djustable closing speed & latch action djustable backcheck djustable delayed action Tri-pack armset (see page ) Mechanical hold-open facility lectro-magnetic hold-open facility Projecting arm closer Slide channel and arm over variants available (; L; S) L/S L/S /L/S /L/S /L/S /L/S uarantee period 0yrs 0yrs 0yrs 0yrs 0yrs 0yrs/yrs lassification 4 8-4 3 4 8-4 3 4 8-6 3 4 8-6 0 3 4 8-4 3 3 8 3-4 3 closer ref. body cover Standard Optional 0 0 30 30 30.T 30.T L 6 8 9 S 6 8 7 66 30 L 6 38 74 S 7 38 76 The riton 00 Series is type tested and independently certified for conformity to all the requirements of N 4 and N where applicable. They are marked and classified as shown in the table above. * PLS NOT: The riton 30 is not marked and therefore not suitable for fire doors.
riton 000 Series - lassic medium duty riton 000 Series - lassic medium duty riton 000 Series - a compact series of closers designed for the most common door sizes eatures & enefits ast aluminium body. Steel rack and pinion mechanism is heat treated for strength and durability. orged, heat treated and ground steel piston for rugged durability. lassic fabricated cover conceals fixings and adjustment screws, reducing the risk of vandalism. vailable in a range of architectural finishes with matching arms or track to complement a variety of door hardware ranges. riton badge of authenticity. The riton 000 Series of closers includes the UK s No. door closing product, the riton 003. It is a compact range of small bodied, fixed strength closers in sizes 3 and 4 and a variable power closer in sizes to 4. When the situation of use and the door size and weight is known, fixed strength closers provide an economic solution. With little on-site adjustment needed, installation is quick and trouble-free. igh quality hydraulic fluid with in-built temperature compensation ensuring reliable operation in temperatures from - to +40. Stylish flatform arm in finish to match door closer cover. 0 ccufit template increases the accuracy of installation and helps to reduce installation time (see page 7 for further information). Wind through power adjustment (003V only). djustable closing speed and... The adjustable power 003V provides the flexibility to fine tune the closing power of the door control in order to achieve the low opening forces necessary to satisfy the requirements of pproved ocument M of The uilding Regulations and the guidance of S 8300 in relation to The quality ct (00). The mechanism is safety valve protected to prolong the life of the closer against abuse and misuse. 3 djustable latch action provides total accuracy of adjustment of the full closing cycle. djustable backcheck available (003V only). Precision needle roller bearings for optimum performance and efficiency. Optional hold-open armset with sturdy cam action knuckle allows the door to be held in the open position for convenience. Not to be used on fire door applications. The riton 000 Series is marked to N 4, fire tested to N 634 and ertifirepproved for use on timber doors to achieve a hour fire rating, and 4 hour for steel doors.
riton 000 Series - djustments riton 000 Series - Options ompatibility with the riton 30 closers with the lassic cover option offers the possibility of mixing and matching closers according to the application. neat, slimline appearance produced by the riton 003T slide track option. riton 003V In addition to the fixed power closers, the 003V variable power unit can be adjusted between power sizes - 4 and is designed specifically to meet the requirements of pproved ocument M of the uilding Regulations. loser adjustments djustable closing power The riton 003V has adjustable power N - 4. 0 igh efficiency closer capable of meeting the closing force requirements of N 4 for fire door applications and the maximum opening force requirements for easy access applications. ully adjustable down to power size to minimise opening force requirements on non-fire rated doors. djustable closing speed djustable from 80 opening through to the final 80 Will directly retrofit existing 003 units, utilising the unique ccufit method of installation. Note: actual opening and closing forces measured on a door are subject to many external influences including hinge friction, smoke and draught seals, lock latches and differential air pressure. Whilst the closing device will meet the required figures, compliance with the standard will depend on each application. Mechanical hold-open unit Mechanical hold-open is achieved by substituting the standard armset with a hold-open armset. It enables doors to be securely held in the open position at the required pre-set angle (adjustable on installation between 80 and 80 depending on the mounting application). The hold-open facility can be easily overridden and the force required to release the hold-open action can be adjusted to suit the weight of door. djustable latch action The speed of closing in the last can be adjusted to overcome seals and latches djustable backcheck To prevent damage to the door, hardware and adjacent walls, caused by the door being flung open or caught by a gust of wind. djustable hold-open Mechanical hold-open armeset option available to hold the door in the open position. djustable between 80 and 80 80 check specification 80 3 The riton 000 Series can be fully suited with the heavy duty adjustable closers of the riton 30 closers with classic covers, making it a truly comprehensive and integrated package of door controls. The riton 000 Series and 00 Series are available in the same high quality finishes. Supplied with matching arms and brackets, both are available in satin stainless steel, polished stainless steel, polished brass and a range of powder coated finishes to match Normbau Nylon hardware. See page 39 for further information. Please note, mechanical hold-open is not permitted on fire door applications.
riton 000 Series - Specification riton 000 Series - Specification loser with scissor arm & lassic cover Specification The riton 000 Series is marked to N 4 (see table) and certified to N 634 (fire). djustable N power sizes - 4 (003V). ixed power sizes N 3 and N 4. 48 ertifire pproved () for use on timber fire doors up to hr and steel doors up to 4hr. 9 49 ie cast aluminium body with hardened steel rack and pinion mechanism. ccufit Installation self-adhesive template for easy installation. djustable backcheck (003V). Optional mechanical hold-open facility. loser with track arm & lassic cover 490 Projecting arm and slide track configurations available. 0 year performance guarantee for reassurance. 0 48 Product features Product references N loser size max. door size [width - weight] 003 003T 003V 004 9 49 70mm - 0kg 80mm - 40kg 3 90mm - 60kg 4 00mm - 80kg loser with scissor arms and lassic cover 0mm - 00kg c -min. b -min. a -max. d -min. e -min. Low eiling f -min. h -min. g -min. 6 400mm - 0kg marked ixed closing power N size 3 3 4 djustable closing power N size - 4 ccufit installation template Maximum angle of opening (controlled closing) 80 80 80 80 djustable closing speed & latch action Regular application loser with track arm and lassic cover Transom application Parallel application djustable backcheck Tri-pack armset for regular, transom and parallel mounting options k -min. j -min. i -max. n -min. m -min. l -max. Low eiling o -min. p -min. q -min. Low eiling r -min. Mechanical hold-open facility Projecting arm closer Slide channel and arm over variants available (classic) (classic) (classic) (classic) uarantee period 0yrs 0yrs 0yrs 0yrs lassification 4 8 3 3 4 8 3 3 4 8-4 3 4 8 4 3 oor mounted - pull side Transom mounted - push side Transom mounted - pull side Standard Optional closer ref. 003 003V 004 body cover a b c d e f g h 0 (36) 0 8(4) 0 68 44 88(00) please note; the figures in brackets refer to dimensions when used with mechanical hold-open armsets closer ref. body cover i j k l m n o p q r 003.T 7 4 0 76 0 4 68 68 93 The riton 000 Series is type tested and independently certified for conformity to all the requirements of N 4. It is marked and classified as shown in the table above. * PLS NOT: losers with mechanical hold-open function may be marked but are not approved for use on fire doors.
riton 00 Series - Medium duty riton 00 Series - Medium duty eatures & enefits riton 00 Series - a comprehensive range of slimline medium duty overhead closers The riton 00 Series is designed to provide a mid-range product with a choice of the most popular options, in a concise, cost-effective package. The riton 00 Series is a simple system which comprises 3 body sizes, each available as standard with a slide-in trimplate or with optional classic square or softline all-over covers. The combinations of performance and cover options provides a highly comprehensive series of closers which can be suited across a wide range of functions and applications. Note: ll covered variants have a flatform arm as standard. ll trimplate variants have screw thread arms as standard. ast aluminium body Precision needle roller bearings allied with rack and pinion mechanism provides efficient operation and high levels of durability. igh quality silicon chrome alloy steel used for the coil spring. igh quality hydraulic fluid for optimum performance and long life with temperature compensation from - to +40. Screw thread armset manufactured from forged steel for additional strength and durability supplied for all trimplate variants (see below). vailable with snap joint arm for quick and easy installation and future maintenance. 0 3 ll-over cover option to conceal all fixings and adjustment screws providing a neat appearance and reducing the risk of vandalism and tampering. vailable in classic square or rounded softline variants. Trimplate option is a simple and cost effective means of concealing fixing and adjustment screws reducing the risk of vandalism and tampering. djustable power. djustable closing speed and... djustable latch action provides total accuracy of adjustment of the full closing cycle. djustable strength backcheck (0 & 30) minimises the risk of damage to the door, its hardware and the surrounding structure. The riton 00 Series is marked to N 4, fire tested to N 634 and ertifire pproved for use on timber doors to achieve a hour fire rating. Optional hold-open armset allows the door to be held in the open position for convenience. Not to be used on fire door applications. 3 0 388
riton 00 Series - djustments riton 00 Series - esign options With enough performance and design options to suit virtually any application The riton 00 Series provides a wide choice of trimplate, classic or softline covers available in a selection of sprayed and metallic finishes which will satisfy the large majority of applications. ecause of the comprehensive nature of the design and performance options, closers can be selected to suit their location in the knowledge that they will remain visually consistent throughout the building. Optional softline cover rom left to right: riton 0.S and riton 30.T.S Optional lassic cover rom left to right: riton 0., riton 30.T. and below, riton 30.T & riton 30.T.S epending on the model, each riton 00 Series closer contains adjustment screws which are accessible from the front face of the closer body by removing the slide in trimplate or all over cover. loser power adjustment is accessed from the end of the closer body. loser adjustments djustable closing power The riton 00 Series offers adjustable power sizes N - 6 0 Mechanical hold-open unit Mechanical hold-open is achieved by substituting the standard armset with a hold-open armset. It enables doors to be securely held in the open position at the required pre-set angle (adjustable on installation between 70 and 0 depending on the mounting application). The hold-open facility can be easily overridden and the force required to release the hold-open action can be adjusted to suit the weight of door. Please note, mechanical hold-open is not permitted on fire door applications. djustable closing speed djustable from 80 opening through to the final. djustable latch action The speed of closing in the last can be adjusted to overcome seals and latches. djustable backcheck To prevent damage to the door, hardware and adjacent walls, caused by the door being flung open or caught by a gust of wind. 80 3 riton 30.T lectro-magnetic hold-open n electromagnet in the slide track is designed to hold the door open during normal use and is connected to the building fire alarm system. On sounding the fire alarm, or in the event of power failure, the electromagnet is deactivated and releases the door closer mechanism to close the door in the normal controlled manner. It is particularly suited for use in areas where a standard door closer could be inconvenient or would impede the flow of people in medium or high traffic applications such as a cinema foyer or hospital corridor. The use of electro-magnetic hold-open door controls are recommended in applications which are designed to meet the levels of accessibility called for in pproved ocument M ccess to and use of buildings. djustable hold-open Mechanical hold-open armset option available to hold the door in the open position. djustable between 70 and 0. 0 check specification 70 eatures of the riton 30.T closer esigned to, and fully compliant with N. Satisfies the requirements of pproved ocument M ccess to and use of buildings. ail safe electronics guarantee door release in the event of a fire or power failure. Track mounted 4v solenoid with an effective and reliable holding force. Manual override allows the door to be pulled closed at any time. On-board test switch simulates fire condition to check operation. ully adjustable hold-open angle from 7 to 0. 4v transformer/rectifier available.
riton 00 Series - Specifications riton 00 Series - Specifications loser with scissor arm & trimplate closer ref. 0 0.T 0 30 30.T 38. 38. 38. 48 48 07 07 36 97 97 60 60 60 60 60 Specification The riton 00 Series is marked to N 4 (see table) and certified to N 634 (fire). djustable N power sizes - 6 and - 4. ixed power sizes N 3. ertifire pproved (388) for use on timber fire doors up to hr fire rating. ast aluminium body with hardened steel rack and pinion mechanism. djustable backcheck. Optional mechanical hold-open facility Projecting arm and slide track configurations available. 0 year performance guarantee for reassurance. loser with track arm & trimplate 490 Product features Product references 0 N loser size max. door size [width - weight] 0 0 30 0.T 30.T 30.T 70mm - 0kg 80mm - 40kg 3 90mm - 60kg 4 00mm - 80kg c -min. b -min. k -min. j -min. loser with scissor arms and lassic cover (S cover shown dotted) a -max. Regular application loser with track arm and lassic cover (S cover shown dotted) i -max. l -max. d -min. e -min. n -min. m -min. Transom application Low eiling Low eiling o -min. f -min. q -min. p -min. h -min. g -min. Parallel application Low eiling oor mounted - pull side Transom mounted - push side Transom mounted - pull side r -min. 0mm - 00kg 6 400mm - 0kg * marked ixed closing power N size 3 djustable closing power N size - 4-4 - 6* - 4 3-4 Maximum angle of opening (controlled closing) 80 80 80 80 80 80 djustable closing speed & latch action djustable backcheck Tri-pack armset for regular, transom and parallel mounting options Mechanical hold-open facility lectro-magnetic hold-open Projecting arm closer Slide channel and arm Trimplate cover option ll over cover variants available all variants available with (classic) / S (softline) cover options uarantee period 0yrs 0yrs 0yrs 0yrs 0yrs 0yrs lassification 3 8-4 3 4 8-4 3 4 8-6 3 4 8 3 3 4 8-4 3 3 8 3-4 3 * Note: In parallel mounting position, power size is N - Standard Optional closer ref. 0 0 30 cover S S a b c d e f g h 0 30(30) 80 30(43) 68 78 44 0(3) 0 3(3) 80 30(43) 7 7 44 0(3) closer ref. 0.T 30.T please note; the figures in brackets refer to dimensions when used with mechanical hold-open armsets. To view lassic and S covers please refer to page 3. cover S S i j k l m n o p q r 3 40 77 0 7 0 7 9 9 3 40 77 0 7 0 7 9 9 The riton 00 Series is type tested and independently certified for conformity to all the requirements of N 4 and N where applicable. They are marked and classified as shown in the table above.
riton 996 Series - Medium duty riton 996 Series - Medium duty riton 996 Series - a dedicated electro-magnetic hold-open or swing-free closer Typically used on fire rated doors where the hold-open or swing-free feature is required either in high traffic areas for convenience or in situations where it would be difficult to satisfy the maximum opening force requirements of Part M of The uilding Regulations. The riton 996 Series is a range of closers with an integrated electro-magnetic hold open mechanism. ach unit can be set to either hold-open or swingfree operation. In either case the function of the closer can be temporarily disabled to allow free passage. When de-activated via a connection to the building fire alarm or smoke detection system, the electromagnet disengages and the door closer closes the door in the normal manner to maintain fire safety. The riton 996 Series is marked to N 4 and N for electrically controlled closing devices, fire tested to N 634 and ertifire pproved for use on timber doors to achieve a hour fire rating. I eatures & enefits Pressure die cast aluminium body giving rugged durability. Steel rack and pinion mechanism is heat treated for strength and durability. oil springs manufactured in silicon chrome alloy steel for superior strength and reliability Unit is supplied with armset and bracket for regular or transom mounting and is self handed to reduce the number of stockholding units required. or parallel mounting please specify when ordering. Parallel mounted version illustrated atch plate can be set to operate in hold-open or swing-free operation during installation to suit individual doorset requirements within a building. lectromagnet is controlled by the building fire alarm/detector system and activates the catch plate to ensure the door closes automatically in the event of a fire. Optional rear cable entry allows units to be installed with concealed cable using a separate concealed door loop to protect the closer against vandalism. 09 0 URNT years mechanical URNT years electrical abricated steel cover available in a range of architectural finishes which suite with the riton 000 and 30 closers with lassic covers to complement a variety of door hardware ranges. I Supplied with armoured power loop to run power safely from the door frame to the closer unit. djustable closing speed and.. djustable latch action provides total control of the full closing cycle.
riton 996 Series - Medium duty riton 996 Series - Medium duty djustable closing speed losers with scissor arm & lassic cover 87 djustable from 80 opening through to the final 0. 80 0 3 38 8 min. 7 64 djustable latch action The speed of closing in the last 0 can be adjusted to overcome seals and latches. 0 9 64 30 When the riton 996 is transom mounted (above) the external power loop is not required, as the power supply can be linked directly to the unit through the frame. This not only creates a more visually appealing arrangement but by eliminating the surface loop reduces the risk of damage to the unit from vandalism. djustable hold-open In hold-open mode the angle of hold open is adjustable from approximately 8 to 9, and from 03 to 0 when fitted on the standard pull side of the door, from 8 to 9 when fitted to the transom, and from 6 to 8 and 90 to 0 when fitted on the push side of the door. 0 check specification 80 Product features N loser size max. door size [width - weight] 98 min. Product references 370 min. opening 9963/0 9963/66 9964/0 9964/66 996/0 996/66 70mm - 0kg 80mm - 40kg 3 90mm - 60kg 4 00mm - 80kg 0mm - 00kg 6 400mm - 0kg marked (N ) Power requirements or the operation of the closer the power requirements are 4V, 90m nominal. Transformers and relay interfaced to the fire alarm system can also be supplied to link the electricity supply and the fire alarm system (see chart below). SR Transformer/Rectifier or use with fire/smoke check electro-magnetic door control units where 4V is not available for the continuous rating required. socket is provided to accept a plug-in relay. Please note: The riton SR range of continuously rated, boxed power supplies will provide transformation/ rectification of the mains supply for use with the riton 996 Series. It is suggested that all electro-magnetic hold open door closers be fitted with a release button close to the door frame so that the door can be released without having to manually pull the door away from the hold open mechanism. ixed closing power N size 3 3 4 4 Max. angle of opening (controlled closing) 0 0 0 0 0 0 djustable closing speed & latch action Regular and transom mounting Parallel mounting old-open adjustment ree-swing operation over variants available lassic lassic lassic lassic lassic lassic uarantee period ll variants - 0yrs mechanical / years electrical lassification 3 8 3 3 3 8 3 3 3 8 4 3 3 8 4 3 3 8 3 3 8 3 Standard Optional Transformer/rectifier Max. no. of units SR4 3 SR0 SR0 38 Output - full wave rectified & unsmoothed (00% ripple) Transformer/rectifier Max. no. of units SR4 4 SR0 0 SR Output - full wave rectified & fully smoothed The riton 996 Series is type tested and independently certified for conformity to all the requirements of N 4 and N. It is marked and classified as shown in the table above.
riton - Light duty closer riton - Light duty closer riton - a fully certified light duty overhead door closer eatures & enefits Pressure die cast aluminium body with sprayed paint finish with matching armset. ardened and ground steel rack and pinion mechanism for smooth efficient operation. Non handed design provides 80 opening / controlled closing. vailable in 4 paint finishes. djustable closing speed from 80 open to open. igh quality hydraulic fluid for optimum performance and long life with temperature compensation from - to +40. djustable latch action in the final of the opening cycle. The riton is a fixed power, compact overhead door closer which is suitable for the most common door sizes. This cost effective closer solution exhibits the characteristics of performance, durability and quality that specifiers have come to expect from a riton door control. ire tested to N 634 and ertifire approved, this marked closer is suitable for use on timber fire doors up to hour rating. With simple, no nonsense installation, the riton comes with a screwthread armset as standard. Screw thread armset manufactured from forged steel for additional strength and durability. Specification The riton is marked to N 4 (see table) and certified to N 634 (fire). ixed N power size 3. ertifire pproved (390) for use on timber fire doors up to hr. Optional hold-open armset allows the door to be held in the open position for convenience. Not to be used on fire door applications. Product features Product ref: N loser size max. door size [width - weight] 70mm - 0kg 80mm - 40kg 3 90mm - 60kg ie cast aluminium body with hardened steel 4 00mm - 80kg rack and pinion mechanism. 0mm - 00kg 390 Optional mechanical hold-open armset. 0 year performance guarantee for reassurance. 6 400mm - 0kg marked ixed closing power N size 3 Maximum angle of opening (controlled closing) 80 djustable closing speed & latch action Mechanical hold-open unit Mechanical hold-open is achieved by substituting the standard armset with a hold-open armset. The riton is type tested and independently certified for conformity to all the requirements of N 4. It is marked and classified as shown in the table opposite. djustable backcheck Standard armset for regular and transom mounting rmset and bracket for parallel mounting Mechanical hold-open facility* over variants available No uarantee period 0yrs or eclaration of Performance please go to: www.britondops.co.uk lassification 4 8 3 3 or full details on and ertifire please go to: www.allegion.co.uk/downloads and click on Test ertificates * PLS NOT: losers with mechanical hold-open function may be marked but are not approved for use on fire doors. loser with scissor arm 0 0 40 40 60 8
riton 80 Series - loor springs riton 80 Series - loor springs riton 80 Series - a range of medium duty floor springs for single or double action doors riton 80 Series loor Springs I The riton 80 Series floor springs are designed for high traffic single and double action doors. They are eatures & enefits ideally suited to: Timber, metal and tempered glass doors igh grade cast iron floor spring body. reas where a discreet, high quality aesthetic is required reas where a surface closer may be subject to abuse pplications where floor depth is limited eat treated high alloy steel mechanism with ball bearing race for optimum efficiency. orrossion resistant galvanised steel, zinc coated and powder coated steel cement box. Performance J I igh quality hydraulic fluid with built-in temperature compensation ensures reliable riton 80 Series floor springs are fixed power units, marked to N 4 and fire tested to N 634 on timber doors to achieve a hour fire rating (see page performance in temperatures from - to +40 without the need for seasonal adjustments. 33). Mounted within a low profile cement box, the riton 80 Series floor springs are suitable for single and double action doors with a maximum opening angle of 30 and with optional hold-open facility. pplication loor spring Max. closing Max. door force width Light duty 8* 0Nm 900mm Med. duty 83 Nm 000mm eavy duty 84 33Nm 00mm * 8 is not marked djustable losing Speed 30 The closing speed adjustment is adjustable from 30 opening. djustment and lignment With the cover of the floor spring removed, the floor spring can be adjusted within the cement box laterally and for height, by screw adjusters to give perfect door alignment. djustments for closing speed and latching action are accessed from the top face of the floor spring body. I Low profile cement box - only 40mm deep. loser mechanism adjustment within the cement box for height 4mm, length 7mm and width 0mm. ull adjustment within the cement box for height and lateral positioning for perfect door alignment. Stainless steel cover plate available in satin or polished finish. ardened steel spindle. asy access to floor spring adjustments for closing speed and latch action. djusters cannot be backed out of the closer body. djustable Latch ction The speed of closing in the last can be adjusted to overcome seals and latches. Max. Opening 30 Speed Increase Speed ecrease J Spindle cover. 30 Max. Opening 30 Latching Speed adjusting valve losing Speed adjusting valve
riton 80 Series - loor springs riton 80 Series - loor springs ouble ction - riton 80 P Two part top pivot accessory with lateral adjustment screw accessed from the edge of door. ottom strap to align with floor spring spindle. imensions for all riton 80 Series floor springs 30 08 6 48 ~6 48 ~ Specification The riton 80 Series conforms to N 4 (see table) and certified to N 634 (fire). marked options with fixed power sizes N 3 and N 4. N 634 approved for use on timber fire doors up to hr rating. igh grade cast iron body with zinc coated, corrosion resistant cement box. oor alignment adjustments [height - 4mm; length - 7mm; width -0mm]. ~ 307 3 Suitable for single and double action doors. ully adjustable for closing speed from 30 to and adjustable latch action from to 0 Mechanical hold-open versions at 90 and 0 Suitable for use with glass patch fittings. marked versions have 0 year performance guarantee for reassurance. 40 307 Single ction - riton 80 SP Two part top pivot accessory with cover caps. This assembly is reversible for left or right hand doors. ottom strap with cover cap to align with floor spring spindle. Top Pivot Product features Product references N loser size max. door size [width - weight] 8.SS 83.SS 84.SS 83. SS.O.90 83. SS.O.0 70mm - 0kg 80mm - 40kg 3 90mm - 60kg 4 00mm - 80kg 0mm - 00kg 6 400mm - 0kg marked ixed closing power N size 3 4 3 3 onforms to N 4 Suitable for single action doors Suitable for double action doors Maximum angle of opening (controlled closing) 30 30 30 30 30 djustable closing speed & latch action Mechanical hold-open 90 0 imensions cement box 307 x 08 x 40mm; cover plate 3 x 30mm over plate in satin stainless steel over plate in polished stainless steel uarantee period yrs 0yrs 0yrs 0yrs 0 yrs lassification 4 8 3 3 4 8 4 3 Timber door Jamb Standard Optional Product escription 80 P ouble action accessory pack 80 SP Single action accessory pack 80.P.PS loor spring cover plate in polished stainless steel 80. P.SP.PS over plates (, & 3) for single action pack in polished stainless steel finish oor L The riton 80 Series is type tested and independently certified for conformity to all the requirements of N 4. Those that are marked are classified as shown in the table above. * PLS NOT: loor springs with mechanical hold-open function may be marked but are not approved for use on fire doors.
riton closer comparison riton closer comparison Series 00 000 00 996 80 Performance & eatures N 4 ategories riton riton 0 riton 0 riton 30 riton 0.T riton 30.T riton 30.T riton 003 riton 004 riton 003V riton 003.T riton 0 riton 0.T riton 0 riton 30 riton 30 riton 30.T riton 30.T riton 9963/0 riton 9963/66 riton 9964/0 riton 9964/66 riton 996/0 riton 996/66 riton 8 riton 83 riton 84 ategory of Use 4 3 4 4 4 4 3 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 4 4 No. of Test ycles 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 oor Mass/Size 3-4 -4-6 3-4 3-4 3 4-4 3-4 3-4 -6-6 -4 3-4 3 3 4 4 3 4 ire ehaviour Safety orrosion Resistance 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 riton 83.O.90 riton 83.O.0 Regular application (Power size)* 3-4 -4-6 3-4 3-4 3 4-4 3-4 3-4 -6-6 -4 3-4 3 4 3 4 3 3 Transom application (Power size)* 3-4 -4 3-4 3 4-4 3-4 3-4 -6-6 3 4 Parallel application (Power size)* 3 3 3-4 - 3-4 -4-4 3-4 - - 3 4 oor mounted (Pull side) Transom mounted (Push side) Transom mounted (Pull side) loor mounted Timber fire doors up to hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr hr Steel fire doors up to 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr 4 hr ertifire approval (ert. No.) 390 388 388 388 388 388 388 390 390 390 390 390 390 djustable power djustable closing speed ackcheck facility elayed action ccufit template Mechanical hold-open lectro-magnetic hold-open lectro-magnetic swing-free * figures represent the ertifire pproved applications and the power sizes this covers. Standard Optional
ccessibility legislation riton closer finishes ccess or ll Improved accessibility in and around a building is becoming an increasing requirement in many environments. or some building users a selfclosing fire door can become a barrier or at least an obstacle. Many countries are introducing laws or building regulations to ensure building owners take reasonable measures to avoid this situation. The riton cam action door closer helps the building owner meet his responsibilities and enhances user experience. Opening v losing orces or accessibility, pproved ocument M and S8300 stipulate opening forces whereas for fire safety, N 4 quotes closing moment. The two forces are not comparable. oors which need to be fire resisting must satisfy both the requirements of the maximum opening force for accessibility and minimum closing moment for fire safety. Non fire resisting doors only need to satisfy the maximum opening force requirements of S8300. Many of the llegion overhead door closers are available in a range of finishes. In most cases they are supplied with matching arms and brackets or slide tracks. Please note, due to the limitations in printing these swatches are shown for illustrative purposes. Please check your choice of finish against product samples. lectroplated metallic finishes satin stainless steel (SSS) polished stainless steel (PSS) polished brass (PS) S8300 Incorporating mendment No. 7.3. states: "or disabled people to have independent access through single or double swing doors, the opening force, when measured at the leading edge of the door, should not be more than 30N from 0 (door in the closed position) to 30 open, and not more than.n from 30 to 60 of the opening cycle." "The ability of a controlled door closing device to close effectively while keeping within the opening force limits depends on its efficiency and the resistances from edge seals, hinge friction, latch resistance and differential air pressure. The opening force should be checked using a plunger type force measuring instrument." Standard sprayed finishes silver (SS) oloured finishes gold (S) sprayed brown (S) sprayed white (WS) white 9 manhattan 67 dark grey 8 black 6 yellow green 3 NW NM N NL NY NR RL-S 000 9 00 RL-S 080 70 0 RL-S 000 3 00 RL-S 000 00 RL-S 080 80 90 RL-S 60 30 38 red slate blue 63 NR NS RL-S 030 30 4 RL-S 40 0 dark blue 37 N RL-S 70 0 blue NU RL-S 70 30 40 Maintenance oor closers are crucial to the safety of a building and its occupants and consequently the correct operation of the door should be checked regularly against the effects of wear & tear and abuse. Only non corrosive and non abrasive cleaning agents should be used. heck all fixings are secure and make a visual check for faults and wear heck the correct functioning of the door; that the door closes properly into the frame and the latch, if fitted, secures the door firmly in position Make any adjustments as necessary for closing power/closing speed and latch action Lubricate all external moving parts on the arm and pivot linkage nsure the closer is clean and free from all debris or electro-magnetic hold-open closers ensure the system is operating correctly by using the test button located on the underside of the track inish selector 00 Series Metallic finishes Sprayed finishes olour lassic cover S cover L cover 000 Series lassic cover 00 Series Trimplate lassic cover Softline cover 996 Series lassic cover Series SSS PSS PS SS S S WS ll as listed 30 variants only No cover 80 Series over plate Standard Optional