Diesel Generator TIG / Electrod Welding MIG / MAG Welding Hand Grinders Hand Drille Hand Tools Air Compressor High pressure washing Column Drilled Lahte Mahcine / 1.000mm Mobile Starting Assistance Grinders Crane / 1 ton Workbench 1 / 16 www.aluratrailer.com
1-Diesel Generator TJ16PE5A Power Output Ratings Standby Power (ESP) Prime Power (PRP) 50 Hz / 400 V kva 16 kw 13 kva 14 kw 11 Engine Manufacturer PERKINS Model 403A 15G2 No of Cylinder / Configuration 3 INLINE Displacement lt 1,5 Bore / Stroke mm 84 / 90 Compression Ratio 22,5:1 Aspiration Naturally Aspirated Governor Type MECHANIC Cooling System WATER Coolant Capacity lt 6 Lubrication Oil Capacity lt 4,5 6 Electrical System VDC 12 Speed / Frequency 1500 rpm / 50 Hz Engine Gross Power kwm 15,4 110 % 5,04 100 % 4,3 Fuel Consumption lt/h 75 % 3,11 50 % 2,24 Exhaust Outlet Temperature C 470 Exhaust Gas Flow m³/min 2,2 Combustion Air Flow m³/min 1,08 Cooling Air Flow m³/min 25,2 Standby Power Standby power is defined as the maximum power available during a variable electrical power sequence, under the stated operating conditions, for which a generating set is capable of delivering in the event of a utility power outage or under test conditions for up to 500 hours of operation per year under average of 70% load. Overloading is not permissible. Prime Power Prime power is defined as being the maximum power which a generating set is capable of delivering continuously whilst supplying a variable electrical load. Average load should be 70%. The generator can be overloaded 10% for 1 hour per 12 hours. Alternator Manufacturer MARELLI Model MJB160SA4 No of Phase 3 Power Factor 0,8 No of Bearing SINGLE No of Poles 4 No of Leads 12 Voltage Regulation ( Steady State) ± %1 Insulation Class H Degree of Protection IP 23 Excitation System AVR (Automatic Voltage Regulator), Brushless Connection Type STAR Total Harmonic Content (No Load) < %2 Frequency Hz 50 Voltage Output VAC 230 / 400 Rated Power (Standby) kva 18,7 Efficiency % 85,6 W x L x H (mm) Weight (kg) lt Fuel Tank (lt) Canopied 700 x 1750 x 1200 520 75 70 Noise db(a) @ 1m Open Skid 700 x 1250 x 950 370 75 TBA 2 / 16 www.aluratrailer.com
2- TIG / Electrod Wedding TECHNOLOGY TIG 222 AC/DC HF/LIFT +ACC. code 852031 Microprocessor controlled, TIG (high frequency HF or LIFT striking), PULSE TIG and MMA inverter welding machine in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and their alloys. Characteristics: TIG regulations: post gas, current down slope/time, bi-level, balance * MMA regulations: arc force according to the type of electrode in use * 2/4 times operation * hot start and anti-stick devices * remote control connector * check control at starting * MMA electrodes: rutile, basic, stainless steel and cast iron * thermostatic, overcurrent, overvoltage, undervoltage protections. Complete with TIG welding accessories. WELDS ALL METALS AESTHETICS QUALITY WITH PULSE WELDING PARAMETERS DIGITAL ADJUSTMENT FIT FOR REMOTE CONTROLS PERSONALIZATION ADVANCE PARAMETERS Technical Data Standards: LVD: EN 60974-1 LVD: EN 50445 EMC: EN 60974-10 V50/60Hz A A EN60974-1 A EN60974-1 V A A 852031 230 5 200 100 100 20 34 1 ph 200 24 % 34 n% cosphi mm cm(l,w,h) kg 3 77 0,6 1,6 IP23 43 17,3 800489781214 4 5,5 4 17 34 3 / 16 www.aluratrailer.com
3- MIG / MAG Welding DIGITAL MIG 330 230-400V code 820030 Microprocessor controlled, MIG-MAG/BRAZING synergic welding machine, with built-in 4 rolls wire feeder. It is particularly suitable for use in light metal works and body shop, for welding galvanised sheets, HSS high strength steel, stainless steel and aluminium sheets. The innovative SYNERGIC DIGIDESK technology allows for a rapid and easy setting of the welding programmes and grants always a high control both of the arc and of the quality of the welding. Characteristics: automatic setting of wire speed according to the features of the material being welded, the shielding gas and the wire diameter * monitoring of power voltage supply * 2/4 strokes, spot operations * automatic torch recognition * regulation of wire speed up slope, post gas time, wire burn-back time * use with spool gun torch * thermostatic protection. Complete with MIG-MAG welding accessories. Technical Data Standards: LVD: EN 60974-1 LVD: EN 50445 EMC: EN 60974-10 V50/60Hz A A EN60974-1 A EN60974-1 V kw A 820030 230 / 400 40 300 215 41 7,5 16 / 10 3 ph 320 25 % 11 cosphi nr mm mm mm mm cm(l,w,h) 0,9 12 0,6 0,8 0,8 0,8 IP22 87 1,2 1,2 1,2 1,2 45,3 80 kg pz/pallet 81 800489764557 5 3 4 / 16 www.aluratrailer.com
4-Hand Grinders Bosch GWS 22-180 H Professional Rated power input 2.200 W No-load speed8. 500 rpm Grinding spindle thread M 14 Main handle Straight Disc diameter 180 mm Weight 5,0 kg 5 / 16 www.aluratrailer.com
5- Hand Driller GBM 13-2 RE Professional Rated power input No-load speed Power output Weight Rated speed Rated torque Drill spindle connecting thread Max. torque drilling range Drilling diameter in aluminium Drilling diameter in wood Drilling diameter in steel 710 W 0 1.000 / 3.000 rpm 365 W 2,4 kg 500 / 1.750 rpm 6,8 / 2,5 Nm 1/2" 20 UNF 39,5 / 12,5 Nm 20 / 12 mm 32 / 20 mm 13 / 8 mm 6 / 16 www.aluratrailer.com
6- Hand Tools 118 piecs 07 TAKIM MUHTEVİYATI Atölye Dolapları ve Takım Çantaları Workshop Trolleys, Cabinets and Boxes LARGE UNIVERSAL TOOL ASSORTMENT Stok Kodu Ürün N No. İçindekiler / Contents İçindekile 41072101512 2200.0128 118 parça metrik muhteviyat! TL 29.10 2.976,55 118 pieces in metric sizes 0503 0100 0300 5100 6x7-8x9-10x11-12x13 14x15-16x17-18x19 20x22-21x23-24x26 25x28-27x32 mm 6x7-8x9-10x11-12x13 14x15-16x17 18x19-20x22 21x23-24x26-25x28 27x32 mm 6 C - 10 C - 12 C 10-11 - 12-13 - 14-15 - 16 17-18 - 19-21 - 22-23 - 24 26-27 - 28-30 - 32 mm 5140 5150 160-180 - 200 94 2845 160 94 2851 160 95 2832 160 96 2824 10 100 2010 10 101 2820 10 100 2175 1.1/2 102 2412 250 104 37 0406 24x27-28x30 mm 112 37 0450 1-140 114 405Y 440 mm 117 268 40 mm 119 9200 12 18 31 5190.5048 36 5130 37 150 3-4 - 5.5-6.5-8 - 10 mm 66 153 6.5 mm 67 170 6.5 mm 67 160 0-1 - 2-3 mm 68 161 2 mm 69 5.5-6 - 7-8 - 9-10 mm 73 33 4615 YB 3710 7 / 16 5-10 2830 10 4 x 195 mm 2-2.5-3 - 4-5 - 6-7 - 8 9-10 - 12-14 -17-19 22 mm 76 84 500 gr 118 350 4-5 mm 121 351 2-4 - 6 mm 121 352 125-150 - 200 mm 121 353 5 mm 122 355 6-7 - 8 mm 122 644 5 sıra 128 100 250 gr 130 www.aluratrailer.com 163
7- Air Compressors 8 / 16 www.aluratrailer.com
8- High pressure washing Product Model Flow Pressure Motor Electrical Weight Code (l / h) (bar) power (kg) (hp) R10203 ST 200 PS 900 200 bar 7,5 hp 380V-3 50 Hz 74 kg Features: Trigger controls The most robust on the market with 1.5 liters of oil sump pumps 30 years experience IE2 motor with energy efficiency standards Chemical mixtures adjustable dosage syringe Chemical / foam spray 12m high pressure hose 500 liter stainless steel water tank. 9 / 16 www.aluratrailer.com
9- Column Drilled Capacity The maximum diameter can be used Max Drilling Capasity Max. Tappig Capacity Motor Power Electricity Column Diameter Central Worktable Perpendicular Movement Distance Central Spindle Axis To Column Distance Of Spindle Movement Ø32 mm 32 mm 32 mm M20-M16 Casting Iron Steel 1 hp. 380 V 50 Hz, 3 Faz 120 mm 450 mm 350 mm 1500 mm Body Material ST 37 2 Mors Number 4 Weight In Kg. Worktable Size Motor Cycle 380 Kg 700 x 450 mm 1400 Rpm 10 / 16 www.aluratrailer.com
10- Lahte Mahcine / 1.000mm Specification Center height mm 330 Distance between centers mm 1000 Swing over bed mm 660 Swing over carriage mm 460 Swing in gap mm 850 Width of bed mm 400 Spindle nose DIN55022 N8 N11 Spindle hole diameter mm 72-80-104 Number of speed 16 Range of spindle speed rpm 11.2-2000 Number of feeds 144 Range of longditudinal feeds mm/rev 0.039-24 Range of transversal feeds mm/rev 0.0195-12 Number of threads 288 (72x4) Metric mm 0.5-240 inch " 60-1/8 Module M 0.125-60 DP DP 240-0.5 Cross slide travel mm 350 Tailstock quill diameter mm 75 Quill travel mm 200 Quill taper morse 5 Main drive kw 7.5-11 Length (For DBC 1m) mm 2550 Width mm 1290 Height mm 1510 Weight (DBC 1 m) kg 1500 11 / 16 www.aluratrailer.com
11- Mobile Starting Assistance Product İnfo: Starting assistance with no interference and voltage peaks Reverse polarity protection Mobile starting assistance Back-up mode up to 50 A Starting possible even with battery removed or defective Protection against overcharging / exhaustive discharge BAT 250 can be charged via 12 V car socket. Technical data: BAT 250 Battery rated voltage Starting assistance current Battery jumper cable cross-section Battery jumper cable length Weight Dimensions (W x H x D) Safety class (DIN 40530) Charging status display Reverse polarity and fault indicator Starting without battery/with exhaustively discharged battery Electronics protection Reverse polarity protection Overload protection Back-up mode Starting assistance Charging on vehicle electrical system 12 V 700 A 25 mm² 2 m 15.0 kg 216 x 272 x 277 mm II After manual release 12 / 16 www.aluratrailer.com
12- Grinders Large, adjustable spark protection glasses Stable, adjustable workpiece supports Easy wheel changes Rubber feet for secure, low-vibration stance Dust-protected on-off switch Bosch GMS 200 D Professinoal Grinding disc diameter Grinding disc widths Grinding disc bore 200 mm 25 mm 32 mm Grit 36 + 60 Rated power input Rated speed Weight without cable 700 W 2,800 rpm 16.2 kg 13 / 16 www.aluratrailer.com
13- Crane / 1 ton 14 / 16 www.aluratrailer.com
14- Workbench Width Depth Bench Height Panel Height Bench-top Drawer Units&Measures Body Color Drawer Color Drawer Capacity Cabinet Door Shelf System Shelf load capacity Locking System Drawer System Bench Legs Other Features 2400 mm 720 mm 900 mm 1100 mm HRP 5-mm sheet 7x100 + 2x200 mm RAL 5015 / Flat RAL 7035 / Flat 95 kg. Have Adjustable 125 kg. Central Lock Latch / Bearing Rail Adjustable Perforated Panel Lighting 2 x socket (220 V) Toolboxes Rack 15 / 16 www.aluratrailer.com
16 / 16 www.aluratrailer.com