STRONG PARTNERS. TOUGH TRUCKS. Technical Guide High Capacity ReachStacker Courtesy of Mache.Market
DIMENSIONS 4-4-31 4-32 / / 1-9 4-4-19 4-24 A/B 4-4-33.4 '- END ON LIFTING CAPACITIES 4' Contaer Aisle Way 1. (3 48) 4. (1) 4'- END ON LIFTING CAPACITIES 4- Outer Turng Radius of Truck. (6 96) ' Contaer Aisle Way MAXIMUM CAPACITY CONTAINER PICKING END TO END MODEL 4-33.2 4. (1) 4 POWERTRAINS 1-3 Power type 7-1 Enge manufacturer / model 7,5 lb/32, 3, lb/14, RS45-31 77, lb/,,3 lb/16, RS-36 92, lb/, 44,1 lb/, 7-2 RS-41S, lb/44, 58, lb/26,3 7-3 Governed speed RS-41L, lb/44, 58, lb/26,3 7-4 Number of cylders / displacement RS-41LS, lb/44, 67, lb/3,3 EPA tier compliance Cus QSM 11 Cus QSM 11 Tier 3-365 hp Tier 3-3 hp Enge power output - rated hp kw 261 3 25 281 Enge power output - peak hp kw 363 271 365 272 3 7-5 Enge torque - max Turbocharger 7-9 Alternator output 8- Transmission manufacturer / model 8-1 Transmission type & speeds Drive axle manufacturer / model 2 Cus QSL 9 Tier 4 Fal rpm 2,1 2,1 4 2,1 # / s 6 / 8.9 6 / 1.8 6 / 1.8 lb-ft N-m 1,1 1,4 Variable Geometry, Water cooled 1 1,5 1,674 Wastegate, Water cooled 1 1,5 1,4 Wastegate, Water cooled 1 Type Amps SOH TE 32 SOH TE 32 SOH TE 27 Powershift 4F x 4R Powershift 4F x 4R Powershift 4F x 4R Kessler D12 Kessler D12 Kessler D12 Courtesy of Mache.Market
liftg capacity Contaer Spreader RS-41L RS-41LSpreader Contaer Contaer Spreader Contaer Spreader 9 6 contaers 88 8 6 contaers 9 6 contaers 8 6 contaers RS-41S Contaer Spreader RS-41S RS45-31 Contaer Spreader Contaer Spreader Contaer Spreader Stabilizer Applied (truck static) Stabilizer NOT Applied 9 6 contaers 88 61.5 61.5 61.5 8 6 contaers 61 61 61 61 9 6 contaers 8 6 contaers 9 6 contaers 8 6 contaers RS-41LS RS-41LS Contaer Spreader RS-36 RS-36 Contaer Spreader Contaer Spreader Contaer Spreader Stabilizer NOT Applied Stabilizer Applied (truck static) 9 6 contaers 77 8 6 contaers 88 88 64 9 6 contaers 8 6 contaers 9 6 contaers 8 6 contaers Note: All load centers,, are taken from the front face of the (front) tires, deduct 3.9 for load centers taken from the front face of the stabilizer. ReachStackers rated with manual pile slope spreader *Deduction for usg the powered pile slope spreader is approximately 2, pounds. C1 C2 r1 r3 252 C3 Courtesy of Mache.Market 3
/ RS45-31 / RS-36 SPECIFICATIONS DIMENSIONS WHEELS WEIGHT GENERAL Description 1-1 1-2 1-3 1-4 1-5a 1-5b 1-5c 1-5.1s 1-5.2s 1-5.3s 1-6a 1-6b 1-6c 1-9 1-1 2-1 2-2a RS45-31 RS-36 Powertra / Drivetra Transmission type Model designation Load capacity at load center distance,8 45,,8 45,,413, Load capacity at load center distance,525 27,,343 31,,3 36, 19, Load capacity at load center distance 28,6 13,, 16, 41,888 Load capacity at load center distance (stabilizer applied) Load capacity at load center distance (stabilizer applied) Load capacity at load center distance (stabilizer applied) Load center distance Load center distance Load center distance Wheelbase 244 6, 244 6, 244 Stac height Service weight Axle loadg, 2-3a Axle loadg, 3-1 3-2 3-3 4-1 4-2 a b c 4-7 4-4-19 4-4- 4-a 4-b 4-24a 4-24b 4-31 4-32 4-33a 4-33b 4-33c 4-33d 4-5-1 5-11 8-7 8-8 1-4 Units Manufacturer front at 1,17,5 1, 72,,827,3 2,2, 9,58, 7,7 13, rear at,3 13, 38,81 17, 48,7,1 front at 77,8,3 77,162, 8,9 36,5 rear at,193 33, 82,12 37,,8 Tire type Tire size 6,,8 front 18. x 25-4PR 18. x 25-4PR rear 18. x 25-4PR 18. x 25-4PR Boom angle mimum / maximum degrees Height of boom lowered 185 4,7 185 4,7 189 4,5 Lift height at load center 1,2 1,2 5,3 Lift height at load center 545 13,85 545 13,85 5 13,5 Lift height at load center 2,28 2,28 2,28 Height, boom extended 713 18,11 713 18,11 717 18,5 Height of overhead guard (cab) 1 3,7 1 3,7 Height below spreader, lowered (MPS / PPS) 53 / 41 1345 / 1 53 / 41 1345 / 1 57 / 45 144 / 113 Overall length, chassis 3 8,3 3 8,3 341 8,65 Overall length cludg boom retracted 7 11,8 7 11,8 475 12, Overall width over drive tires 4, 4, Spreader ISO ' - 4' Pile slope 4, ISO ' - 4' ISO ' - 4' Overall width with ' contaer 6,1 6,1 6,1 Overall width with 4' contaer 48 12, 48 12, 48 12, Ground clearance, lowest pot 11.2 285 11.2 285 12. 34 Ground clearance, center of wheelbase 17.2 437 17.2 437.9 532 Mimum aisle width for ' contaer without operatg clearance 4 12,439 4 12,439 6 12,8 Mimum aisle width for ' contaer (cl 1% clearance) 13,3 13,3 13,9 Mimum aisle width for 4' contaer without operatg clearance 9 14,3 9 14,3 9 14,3 Mimum aisle width for 4' contaer (cl 1% clearance) 6,6 6,6 6,6 Outside turng radius 334 8,4 334 8,4 337 8,2 Service brake Oil iersed (wet) disc Park brake Sprg apply, dry disc Oil iersed (wet) disc Sprg apply, dry disc Oil iersed (wet) disc Sprg apply, dry disc Hydraulic tank capacity 6 6 6 Fuel tank capacity 9 83 9 83 9 83 DEF Tank capacity * Deduct 12.2 with powered pile slope option ** Load capacities shown with mechanical pile slope (MPS) spreader. Deduction for usg powered pile slope spreader is approximately 2,. NOTE: Above speciications, unless otherwise listed, are for a standard truck without optional equipment. CERTIFICATION: These lift trucks meet design speciications of Part II ANSI B.1-1969, as required by OSHA Section 1.178(a)(2) and also comply with Part III ANSI B.1-revision effect at time of manufacture. Certiication of compliance with the applicable ANSI standards appears on the lift truck. Performance speciications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance speciications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operatg area, proper service and matenance of the vehicle. If these speciications are critical, the proposed application should be discussed with your dealer. 4 Courtesy of Mache.Market
RS-41L / RS-41S / RS-41LS SPECIFICATIONS DIMENSIONS WHEELS WEIGHT GENERAL Description 1-1 1-2 1-3 1-4 1-5a 1-5b 1-5c 1-5.1s 1-5.2s 1-5.3s 1-6a 1-6b 1-6c 1-9 1-1 2-1 2-2a RS-41L RS-41S RS-41LS Powertra / Drivetra Transmission type Model designation Load capacity at load center distance,413,,413,,413, Load capacity at load center distance,3 41, 83,776 38,,3 41, Load capacity at load center distance 5,76,,7, 5,76, Load capacity at load center distance (stabilizer applied),413,,413, Load capacity at load center distance (stabilizer applied),3 41,,3 41, Load capacity at load center distance (stabilizer applied) 61,7 28,,139 3, Load center distance Load center distance Load center distance Wheelbase 264 6,7 244 6, 264 6,7 182,12 82, 184,36 83, 186,1 84, 7,8 13,4 2,367,4 2,88, Stac height Service weight Axle loadg, 2-3a Axle loadg, 3-1 3-2 3-3 4-1 4-2 a b c 4-7 4-4-19 4-4- 4-a 4-b 4-24a 4-24b 4-31 4-32 4-33a 4-33b 4-33c 4-33d 4-5-1 5-11 8-7 8-8 1-4 Units Manufacturer front at rear at,6 25, 53,2 24,,116 25, front at 84,7 38, 85,319 38,7 89,67 4,4 rear at 97,885 44,4,8 44, 97,444 Tire type Tire size 44, front rear Boom angle mimum / maximum degrees Height of boom lowered 189 4,5 189 4,5 189 4,5 Lift height at load center 5,3 5,3 5,3 Lift height at load center 5 13,5 5 13,5 5 13,5 Lift height at load center 2,28 2,28 2,28 Height, boom extended 717 18,5 717 18,5 717 18,5 Height of overhead guard (cab) Height below spreader, lowered (MPS / PPS) 57 / 45 144 / 113 57 / 45 144 / 113 57 / 45 144 / 113 Overall length, chassis 3 9, 344 8,75 364 9,25 Overall length cludg boom retracted 4 12,5 475 12, 4 12,5 Overall width over drive tires 4, 4, Spreader ISO ' - 4' Pile slope 4, ISO ' - 4' ISO ' - 4' Overall width with ' contaer 6,1 6,1 6,1 Overall width with 4' contaer 48 12, 48 12, 48 12, Ground clearance, lowest pot 12. 34 9.8 25 9.8 25 Ground clearance, center of wheelbase.9 532.9 532.9 532 Mimum aisle width for ' contaer without operatg clearance 6 12,8 6 12,8 6 12,8 Mimum aisle width for ' contaer (cl 1% clearance) 13,9 13,9 13,9 Mimum aisle width for 4' contaer without operatg clearance 9 14,3 9 14,3 9 14,3 Mimum aisle width for 4' contaer (cl 1% clearance) 6,6 6,6 6,6 Outside turng radius 7 9,62 337 8,2 7 9,62 Service brake Oil iersed (wet) disc Park brake Sprg apply, dry disc Oil iersed (wet) disc Sprg apply, dry disc Oil iersed (wet) disc Sprg apply, dry disc Hydraulic tank capacity 6 6 6 Fuel tank capacity 9 83 9 83 9 83 DEF Tank capacity * Deduct 12.2 with powered pile slope option ** Load capacities shown with mechanical pile slope (MPS) spreader. Deduction for usg powered pile slope spreader is approximately 2,. NOTE: Above speciications, unless otherwise listed, are for a standard truck without optional equipment. CERTIFICATION: These lift trucks meet design speciications of Part II ANSI B.1-1969, as required by OSHA Section 1.178(a)(2) and also comply with Part III ANSI B.1-revision effect at time of manufacture. Certiication of compliance with the applicable ANSI standards appears on the lift truck. Performance speciications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance speciications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operatg area, proper service and matenance of the vehicle. If these speciications are critical, the proposed application should be discussed with your dealer. Courtesy of Mache.Market 5
performance specifications GENERAL Description Units 1-1 Manufacturer 1-2 Model designation PERFORMANCE RS45-31 RS-36 RS-41L RS-41S RS-41LS 5-1a Travel speed 5-1b 5-2a Liftg speed ft/m 5-2b ft/m 5-3a Lowerg speed ft/m 5-3b ft/m 5-5 Drawbar pull - 1 (1.6 ) 81,6 363 81,381 362 81,381 362,962 3 81,381 362,962 3 5-6 Drawbar pull - max 97,114 432 96,889 431 85,874 382 85, 4 38 84, 4 38 85,4 38 / 26 / 26 / 25 / 25 33 / 33 / 33 / % PERFORMANCE PERFORMANCE WITH TIER 4 FINAL CUMMINS QSL 9 ENGINE - TE 32 TRANSMISSION no load / rated load 5-7 Gradeability 1 (1.6 ) WITH TIER 3 CUMMINS QSM 11 365HP ENGINE - TE 32 TRANSMISSION 5-1a Travel speed 5-1b 16.2 26 14.9 24 14.9 24 14.9 24 5-2a Liftg speed ft/m 5-2b ft/m 5-3a Lowerg speed ft/m 5-3b ft/m 5-5 Drawbar pull - 1 (1.6 ) 61,5 61,5,528,528,528,528 5-6 Drawbar pull - max 97,114 432 96,889 431 85,874 382 85, 4 38 85, 4 38 85,4 38 / 26 / 26 / 25 / 25 33 / 33 / 31 / 31 / 31 / no load/rated load 5-7 Gradeability 1 (1.6 ) % PERFORMANCE WITH TIER 3 CUMMINS QSM 11 3HP ENGINE - TE 27 TRANSMISSION 5-1a Travel speed 11.8 19 11.8 19 11.8 19 5-1b.5 25 5-2a Liftg speed ft/m.25.25.25.25.25.25 5-2b ft/m 5-3a Lowerg speed ft/m 5-3b ft/m 5-5 Drawbar pull - 1 (1.6 ) 61,5 61,5,528,528,528,528 5-6 Drawbar pull - max 61,7 61,5 61,5 61,5 61,5 61,5 36 / 36 / 36 / 36 / 34 / 19 34 / 19 32 / 18 32 / 18 32 / 18 32 / 18 34 / 19 34 / 19 no load/rated load 5-7 Gradeability 1 (1.6 ) 6 1-3 Powertra / Drivetra 1-4 Transmission type % Courtesy of Mache.Market
STANDARD FEATURES ENGINE Tier 4 Fal Cus QSL 9L 363 hp (271 kw) peak power. Smooth torque of 1, lb-ft at 1 14 rpm provides excellent acceleration and power, together with low fuel consumption. Tier 3 Cus QSM 11L 365 hp (272 kw) peak power. Torque available of ft- (1634 Nm) at 1 rpm with good fuel consumption. Tier 3 Cus QSM 11L 3HP (4 kw) peak power. Torque available of ft- (14 Nm) at 1 rpm.* Enge protection system to protect agast high temperature, low coolant level and high/low oil pressure. Fuel/water separator. AIR CLEANER Integrated heavy duty take pre-cleaner (Tier 4 Fal) Packaged onto enge Self-cleang Designed for long life Capable of iltration extreme duty applications and extreme weather conditions Sy-Klone pre-cleaner (Tier 3) Self-cleang Extends air ilter life, which creases uptime Handles all kds of mixed debris, cludg mud, snow, ra, leaves, sawdust, chaff, and dust COOLING SYSTEM Oversized coolg system cludes: Charge air cooler Enge cooler Hydraulic oil cooler Transmission oil cooler Separate coolers for easy servicg Suitable up to 1 F ambient normal operation Suitable up to 113 F ambient extreme applications Hydraulically driven on-demand coolg fan ELECTRICAL Engeered to meet UL 8 requirements CANbus counication allows the transmission, hydraulic system, enge, and dash display to counicate Environmentally sealed connectors used throughout system Silicone seals to prevent moisture connections Thermoplastic housgs for use -67 F to 257 F Electrical panel located on right side of console Provisions for 4 fuses and 8 relays TRANSMISSION Spicer Off-Highway TE 32 4-speed autoshiftg transmission Spicer Off-Highway TE 27 4-speed autoshiftg transmission (available with 3HP Tier 3 enge option only) 4 speeds forward and reverse Fully electronically controlled APC electronic controller Forward reverse lock out Prevents change of direction at high speeds Transmission protection system to protect agast high temperature and high/low oil pressure AUTOMATIC THROTTLE-UP Iediate response to lift puts when the operator activates the joystick Only activated when the transmission is the neutral position or when the chg pedal is fully depressed Enge automatically revs up when liftg Feature is disengaged when truck is gear DRIVE AXLE Kessler Model D12 rigid planetary drive axle Drive axle is bolted to the frame Outboard planetary end reductions Oil-iersed (wet) brakes on the drive axle feature oil coolg for durability and are virtually matenance free STEER AXLE One-piece steer axle frame Large sealed, tapered roller beargs BRAKE SYSTEM Hydraulically actuated, oil cooled wet disc brakes Includes accumulator for dead-enge bra Premium oil iltration system Brake ilter micron Oil coolg system Cooled oil supplied by gear pump Ensures maximum performance and long life Park brake composed of dry disc mounted to drive axle put shaft Sprg applied, hydraulic released Long life friction discs CHASSIS Sgle piece welded steel frame Fewer components Rigid construction High strength steel HYDRAULIC SYSTEM on-demand load-sensg hydraulic system troduces an eficient way to meet hydraulic load demands: Based on Variable Displacement Pump (VDP) technology. Pump is only active when oil is needed. Less heat is produced, helpg oil and ilters last longer. Hoses, seals, and components also wear less and last longer. Enge runs quieter and at lower speeds, extendg life of major components. Leak free O-Rg Face Seals (ORFS) ittgs standard throughout the truck. Capable of more oil displacement even at low enge speeds. BOOM AND ATTACHMENT Durable two stage, rectangular shaped boom Welded side and out for added strength Inner boom constructed of T-1 steel 817 premium spreader Mechanical pile slope to 4 expansion +185 / - rotation 31.5 sideshift each side (63 total) * Available non-epa regulated markets only. Courtesy of Mache.Market 7
standard features and options STANDARD EQUIPMENT Cus QSL 9L 363 HP turbo diesel enge Tier 4 Fal compliant * ECO / elo / HiP Hibernate idle Hydraulically driven coolg fan Spicer off-highway TE-32 4 speed auto-shiftg transmission 2-stage boom Integrated spreader attachment, Model 817 with mechanical pile slope Wet disc brakes Planetary drive axle On-demand load sensg hydraulic system featurg variable displacement pump technology Directional control lever Steer wheel nut protection Enclosed operator compartment featurg: Seat-side, joystick hydraulic control Multi-functional display panel Telescopg & tiltg steerg column Floor mat 24-12V DC converter Isolated mountg for low noise and vibration Handrails for operator entry and exit (left side) Steerg wheel spner knob Electronic horn ( dba) Heater with 3-speed fan Front and rear wdow defrosters Overhead and rear sunshades Intermittent sgle front wiper Top and rear wipers Recirculation fan 3B6 load moment dicator with monochrome display Mechanical, full suspension cloth seat with tegrated adjustable armrest and seat belt Electronic twist lock position dicator with LED signals and audible tone (TWIST Module) Interior wide angle mirrors External wide angle mirrors mounted on front fenders Operator restrat system Operator presence system Lockable battery disconnect switch Integrated heavy duty air take pre-cleaner 24-volt electrical system 9 lon fuel tank lon hydraulic tank lon DEF tank 1 amp alternator Liftg eyes to hoist complete truck less spreader Light kit 3, consistg of: Front: 4 halogen work lights fender mounted 2 marker lights 4 halogen lights boom mounted Rear: 2 rear mounted halogen lights 2 stop/tail/backup lights Turn signal & hazard lights Spreader: 2 halogen work lights on spreader Visible alarm amber strobe light key switch activated Audible alarm reverse direction activated 82 12 db(a) self adjustg Non-loc fuel cap Literature package Operator s manual Service manual Parts manual 12 months / 2, hours manufacturer s warranty OPTIONS Cus QSM 11L 365 HP turbo diesel enge Tier 3 compliant Cus QSM 11L 3 HP turbo diesel enge Tier 3 compliant (for non-epa regulated markets only) Model 817 spreader options: Powered pile slope Powered dampeng WTP (Wide Twistlock Position) 4 liftg eyes located under center beam of spreader Tire options drive and steer: 18. x 25 4 bias ply slick (STMS LS5) 18. x 25 4 bias ply treaded 18. x 33 36 ply Seat options: Air ride, full suspension cloth seat with high back rest Deluxe air ride full suspension cloth seat Deluxe air ride full suspension cloth seat with heated seat cushion 3B6 load moment dicator with color display Adjustable traction speed limiter factory pre-set to 8 Adjustable automatic enge shutdown Air conditiong Right hand side stairway and handrails Auto greasg system Basic truck / outer boom Spreader / ner boom Hydraulic slidg cab High tensity discharge - xenon (HID) lights * Requires ultra-low sulfur diesel fuel and low-ash enge oil Company P.O. Box 76 Greenville, North Carola 278-76 Part No. RS45-/TG 5/16 Litho U.S.A. Visit us onle at www.hyster.com or call us at 1-8-HYSTER-1.,, and STRONG PARTNERS. TOUGH TRUCKS. are registered trademarks the United States and certa other jurisdictions. products are subject to change without notice. All trucks shown with optional equipment. 16 Company. All rights reserved. Courtesy of Mache.Market Powered by TCPDF (www.tcpdf.org)