SECTION D Bi-Folding Window and Door Hardware
D SECTION D Bi-Folding Window and Door Hardware D7 D9 D11 D13 D15 D17 Twin Bolt Locksets Millton Bi-fold 2-Point Locksets Pinnacle Bi-fold Locksets Flush Bolts Bi-fold - Heavy Duty Range Hinges
Bi-Folding Window and Door Hardware Quick Selection Guide Twin Bolt Locksets Millton Bi-fold 2-Point Locksets Twin Bolt Aria / Uno Styled - for Bi-Folding Windows and Doors Page D.8 Millton Bi-fold 2 Point Page D.10 Pinnacle Bi-fold Locksets Flush Bolts Pinnacle Bi-fold Locksets Page D.12 Flush Bolts Page D.14 Bi-fold - Heavy Duty Range Hinges Heavy Duty Bi-fold Page D.16 Surface Bi-fold D-Handle / Hinge Page D.18 Bi-folding Window and Door Hardware Interlock Product Catalogue www.assaabloy.co.nz D.5
Twin Bolt Locksets * Aria handle option shown
Bi-Folding Window and Door Hardware Twin Bolt Aria / Uno Styled - for Bi-folding Windows and Doors The Twin Bolt lock body has been designed for use on both bi-fold windows and doors. The Twin Bolt combines security features with a practical design, fulfilling the needs created by architectural innovations within the residential market. Suitable for use with aluminium or upvc hinged windows and doors. Features Twin Bolt features internal locking only Standard rod length 1 x 1m + 1 x 1.3m Provides two points of security with throw rods top and bottom (13mm throw) Practical, easy installation Zinc die-cast construction Standard moulded plastic packers and fixing screws provided Threaded rod connection provides easy adjustment Handle turning angle of 90 degrees Can be keyed alike to other ASSA ABLOY CYL4 locks for one key convenience New Zealand made Options Can be used with Aria or Uno handle for bi-fold kit application* Aria bi-fold Uno bi-fold 150 30 28 15 36 43 Non-locking (internal handle only) or locking (internal handle and cylinder) 16 36 Multipoint rod extension kit available 148 43 26 Detail not required if non-locking configuration Ø 3.30 58.10 5 38 Ø 16 58 M4 LOCKING CYLINDER FIXING HOLES THREADED SHOOT BOLTS SHOWN FULLY EXTENDED 199.7 43 21.50 43 Ø 10 11.3 85 M5 FLYING HOLES 265.5 190 SQUARE DRIVE C 60 24 MAX 17.75 MAX FACE M5 Holes for Possible Side Fixing to Extrusion Note: - Fits door with a minimum cavity of 18mm x 24mm - When using an Aria or Uno handle, a gap of 16mm between bi-folding panels is required D.8 Interlock Product Catalogue www.assaabloy.co.nz
Millton Bi-fold 2-Point Locksets
Bi-Folding Window and Door Hardware Millton Bi-fold 2-Point The Millton Bi-fold set provides a residential and light commercial grade, 2-point mortice lock with vertical locking rods making it ideal for use on folding door and window applications. Features Securiturn is a convenient, safe and secure removable thumbturn made available with the Millton Bi-fold lock Key operated vertical locking rods Can be keyed alike to other ASSA ABLOY CYL4 locks for one key convenience New Zealand made Options Double cylinder deadlocking Single cylinder locking with turnknob Additional locking options available Multi-point extension kit Available in a wide range of powdercoat colours and satin chrome finish P84065 21 210 198 184 28 Ø 3.2 50 58 88 58 8.7 Ø 3.2 R15 30 24.5 D.10 Interlock Product Catalogue www.assaabloy.co.nz
Pinnacle Bi-fold Locksets * Aria handle option shown
Bi-Folding Window and Door Hardware Pinnacle Bi-fold Locksets The Pinnacle Mortice lock has been designed for use on bi-fold windows and doors. The Pinnacle lock combines security features with a practical design, fulfilling the needs created by architectural innovations within the residential market. Suitable for use with aluminium windows and doors. Features Provides 2 points of security from one motion Bolts throw 22mm for enhanced security Practical, easy installation Threaded rod connection provides easy adjustmen Handle turns through 90 degrees from locked to unlocked Standard euro cylinder options can be keyed alike to other ASSA ABLOY CYL4 TM locks for one key convenience Rods provided are 1m + 1.3m New Zealand made Options Bi-fold kits can be used with a Uno or Aria styled bi-fold operator Non-locking or deadlocking options available Multipoint rod extension kit available 30.0 French door kits are available and are supplied with standard Aria or Verona lever furniture to match doors 15.0 36.0 40.0 FOR 40mm BACKSET 35.0 FOR 35mm BACKSET 30.0 FOR 30mm BACKSET 19.5 70.0 64.0 65.0 HOLE FIXING CENTRES 185.5 55.6 30.0 85.0 140.0 134.0 125.6 15.0 36.0 65.0 HOLE FIXING CENTRES 23.0 185.5 D.12 Interlock Product Catalogue www.assaabloy.co.nz
Flush Bolts
Bi-Folding Window and Door Hardware Flush Bolts The Interlock flush bolt range is used for the safe bolting of aluminium doors and windows. The 7mm diameter plated steel rod provides high security and is activated by a strongly constructed die-cast zinc body and operating lever with comfortable finger grip. Features All flush bolts are supplied as standard with a 300mm rod threaded for 150mm along its length, enabling the rod to be factory trimmed to suit varying door/window heights A rod guide is also supplied for fitting inside the door/window frame A 600mm rod option is also available Options The range has three variants- Surface-mounted model with standard width face plate, can be mounted either on the face or on the leading edge of a door stile Surface-mounted narrow face plate, is suitable for bi-fold windows as well as doors because of its smaller lines Recessed model, has a shorter overall length and is recessed into a door stile to give a smooth, flush appearance. Sizes and types to suit both doors and windows P3513 P3514 P3512 Available in a range of colours to match decor A Ø 14mm A B C D P3512 Surface Mounted 13 153 120 19 P3513 Recess Mounted 17.5* 129 110 23 P3514 Surface Mounted Narrow 15 155 120 18 * Measured from inside of extrusion B C Ø 4mm D Surface Mounted Narrow Plate 18.5 4 16mm Throw Surface Mounted 17.5 5 16mm Throw Recessed 20.5 7 3 16mm Throw 172 155 153 170 145 110 129 20 26 24 26 23 26.5 D.14 Interlock Product Catalogue www.assaabloy.co.nz
NEED IMAGE HERE Bi-fold - Heavy Duty Range
Bi-Folding Window and Door Hardware Heavy Duty Bi-fold This heavy duty bi-fold system is designed for aluminium doors. The system is made up of three components: a carriage/bottom set guide, a hinge and a D-Handle. Features Maximum recommended panel sizes of 3000mm high by 900mm wide Maximum panel weight of 80kg Vertical adjustment of 10mm Hinges are non-handed and have removable hinge pins Carriage and guide sets are available in left, right hand and central configurations Includes complementing D-Handle New Zealand made P3867 30.1 MIN BETWEEN TRACKS Ø30.1 MAX WHEEL [3.175] 40 MIN R1/8 25 39.10 MIN 4.50 MIN 13 MIN CARRIAGE TRACK 31.55 TRACK TO GUIDE OFFSET 10 MIN 20 MIN GUIDE TRACK 16.2 MIN Ø 16 MAX ROLLER D.16 Interlock Product Catalogue www.assaabloy.co.nz
Hinges NEED IMAGE HERE
Bi-Folding Window and Door Hardware Surface Bi-fold D-Handle / Hinge The Timbafold range of folding door hardware has been specifically designed to fit timber joinery, the use of which has become more popular in recent years. The D-Handle and Hinge is part of this thoroughly tested range of quality hardware for bi-folding exterior doors and windows. Features Available in black Ergonomically designed D handle for comfortable grip and easy operation New Zealand made 30461 50 32 50 32 32 22.5 Ø 4.4 Ø 4.4 Ø 4.4 10 12.5 12.5 49 10 49 114 10 49 114 12.5 98 49 114 43.25 43.25 43.25 R R7.5 R 7.5 16 16 16.5 7.0 16.5 7.0 D.18 Interlock Product Catalogue www.assaabloy.co.nz