Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking Folding door stop: With concealed hinges and opening angles of 105 120 or 165 Door width: Max. 300 mm, perform stop test with wider doors Installation: For screwing into 32 mm series drilled holes, control arm can be mounted on the left or right Application Installation Both doors must have the same width 1 Door 2 Doors Stop with concealed hinges and opening angles of 105 120 or 165 Corner cabinet with 2 doors, stop with concealed hinges with opening angle of 165 Corner mounting: The butting edges of the doors are mitred at 45. The doors can be opened independently, if desired. Mount control arm to door Mark a using the control arm with the door closed Mark b using the control arm with the door fully open Fit mounting plate so that the control arm pivot point is at intersection c With control arm 105 120 : Attach control arm to mounting plate and secure with cap nut With control arm 165 : Screw on control arm with mounting plate FF.4
Control arm 100 120, lateral mounting with concealed hinges and opening angles of 105 120 Cap nut Bearing Folding door stop: Concealed hinges with opening angles of 100 120 Installation depth: Min. 320 mm Control arm Supplied with 1 Control arm with door bearing made of nickel plated steel Mounting plate 1 Plastic mounting plate Door bearing 1 Plastic bearing 1 Plastic cap nut Length mm Cat. No. 404 409.41.700 Packing: 1 or 50 pcs. Fitting to door x = Door overlay Control arm 170, lateral mounting with concealed hinges and opening angle of 170 Mounting plate Folding door stop: Concealed hinges with opening angle of 170 Installation depth: Min. 330 mm Press-in Sleeve Door bearing Control arm Supplied with 1 Nickel plated steel control arm 1 Nickel plated steel mounting plate 1 Screw for mounting plate 1 Nickel plated door bearing 1 Plastic press fit dowel Ø10 x 13 mm Fitting to door Screw Please order separately: Concealed hinges, rolled hinges, folding door handle and adapter for fitting handles to folding doors. Length mm Cat. No. 397 409.40.710 Packing: 1 or 50 pcs. FF.5
Fold 20 VF 4T, door weight up to 10 kg Door height: Max. 1,000 mm Door width: Max. 500 mm Door thicknesses: Max. 20 mm Running gear: Top running, 2 rollers Version: Attached at the side Fitted door leaves can be combined to door leaf pairs using detachable panel to panel hinges with removable pin One-man installation possible even with large door leaves For door heights up tp 1,000 mm Installation Running track dimension Door offset FF.6
Set Cat.No. Complete fitting set for 2 pairs of doors without running track 410.2.000 Packing: 1 set Set consisting of: Material Finish For 1 pair of doors Cat. No. Running gear, left, top running, 2 rollers, Steel Burnished 1 pc. 410.2.104 friction bearing mounted, incl. screws Running gear, right, top running, 2 rollers, friction bearing mounted, incl. screws Steel Burnished 1 pc. 410.2.105 Concealed hinge, with 1 screw hole, for Ø35 mm cup drilling Zinc alloy Nickel plated 2 pcs. 410.2.403 Panel to panel hinge, can be detached, with removable steel pin Zinc alloy Nickel plated 4 pcs. 410.25.402 Packing: 20 pcs. Please order running track and additional components separately. Running track Material Finish Length mm Cat. No. Running track, not drilled Aluminium Bright 5,000 410.2.605 Packing: 20 pcs. Additional components Material Finish Cat. No. Panel to panel hinge, cranked, Steel Galvanized 354.15.911 with fixed steel pin Packing: 20 pcs. FF.7
Fold 40 MF/VF flex, door weight up to 40 kg Area of application: For folding sliding doors that are free sliding or mounted to the cabinet on one side with concealed hinges Door height: Max. 2,500 mm Door width: Max. 500 mm Door thickness: 19 25 mm Vertical door gap width: 1 4 mm Height adjustment: ±2 mm at running gear using screw Running gear: 3 rollers, with plastic coated ball bearing mounted rollers Easy height adjustment using adjusting screw Installation option 1: Mounted to one side of cabinet Installation option 2: Free sliding Installation option 3: Several pairs of doors connected, free sliding or mounted to one side of cabinet When mounting doors dimensions specified observed accordingly.! Outer runner " Centre runner Illustration shows installed free sliding doors Illustration shows mounted to one side of cabinet Dimensions for centre runner " FF.
Set consisting of: Material Finish Cat. No. Top running gear, end door Steel Nickel plated 409.61.750 Top running gear, centredoor Steel Nickel plated 409.61.930 Bottom guide, end door Steel Nickel plated 409.62.700 Bottom guide, centre door Steel Nickel plated 409.62.900 Panel to panel hinge Zinc alloy Nickel plated 409.63.710 Hinge connection, centre Steel Nickel plated 409.62.940 Packing: 1 pc. Mounted to 1 side of cabinet Free sliding 2-leaf 3-leaf 4-leaf 5-leaf 6-leaf 1 pair of doors 2 pairs of doors 3 pairs of doors Top running gear, end door 1 pc. 1 pc. 1 pc. 2 pcs. 2 pcs. 2 pcs. Top running gear, centredoor 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Bottom guide, end door 1 pc. 1 pc. 1 pc. 2 pcs. 2 pcs. 2 pcs. Bottom guide, centre door 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Panel to panel hinge 3 pcs. 3 pcs. 6 pcs. 6 pcs. 9 pcs. 3 pcs. 6 pcs. 9 pcs. Hinge connection, centre 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Order required door configuration individually according to "Supplied with" table. Please order running and guide tracks separately. Tracks Material Finish Length mm Cat. No. Single top running track, for screw fixing Aluminium Bright 2,000 940.42.920 3,000 940.42.930 Bottom guide track, for screw fixing Aluminium Bright 2,000 409.60.920 3,000 409.60.935 FF.9
Fold 40 MF/VF 1T, door weight up to 40 kg Area of application: Folding sliding doors mounted to cabinet on one side with concealed hinges Door height: Max. 2,500 mm Door width: Max. 500 mm Glass thickness: 4 mm Vertical door gap width: 2 mm Height adjustment: ±2 mm on running gear using screw Running gear: 3 rollers, with plastic coated, ball bearing mounted rollers Easy height adjustment using adjusting screw Installation dimension Installation Required number of concealed hinges GH (glass height) = frame height mm FF.90
For 1 pair of doors Material Finish Packing Cat. No. A Top running gear, 1 pc. Steel Nickel plated 1 pc. 409.61.760 B Bottom guide 1 pc. Steel Nickel plated 1 pc. 409.62.740 C Panel to panel hinge Depending on door height Steel Nickel plated 1 pc. 409.63.700 D Frame mounting angle, small pcs. Steel Galvanized pcs. 406.9.561 E Frame mounting angle, large pcs. Steel Galvanized pcs. 406.9.560 F Buffer 4 pcs. Plastic Black 4 pcs. 409.66.010 Please order hinge, mounting plate and securing bracket to prevent cabinet from tipping separately. FF.91
G 1st top and bottom insert for door overlay 25 mm G 2nd top and bottom insert for door overlay 20 mm G 3rd top and bottom insert for door overlay 15 mm I 1st insert for bottom only, for door overlay 25 mm I 2nd insert for bottom only, for door overlay 25 mm I 3rd insert for bottom only, for door overlay 25 mm For 1 pair of doors Material Finish Packing Cat. No. 3 pcs. Plastic Grey 3 pcs. 409.66.023 3 pcs. Plastic Grey 3 pcs. 409.66.022 3 pcs. Plastic Grey 3 pcs. 409.66.021 1 pc. Plastic Grey 1 pc. 409.66.033 1 pc. Plastic Grey 1 pc. 409.66.032 1 pc. Plastic Grey 1 pc. 409.66.031 H Insert, centre Depending on door height Plastic Grey 2 pcs. 409.66.041 J Set of fixing screws for attaching fittings to aluminium frame 1 set 1 set 409.66.050 Please select parts number G and I that complies your requeirements. FF.92
Material Finish Packing Cat. No. Top running track, for screw fixing Aluminium Bright 2,000 mm 940.42.920 3,000 mm 940.42.930 Bottom guide track, for screw fixing Aluminium 2,000 mm 409.60.920 Aluminium frame profile, for screw fixing with frame mounting angle 3,000 mm 409.60.935 Aluminium Silver coloured anodized 2,500 mm 409.67.925 3,500 mm 409.67.935 Bar profile, for subdividing doors Aluminium Silver coloured anodized 2,500 mm 409.6.925 3,500 mm 409.6.935 Traverse profile, for fixing the bar profile Aluminium Silver coloured anodized 2,500 mm 409.69.925 Traverse profile, for fixing the bar profile Steel Galvanized 2 pcs. 3,500 mm 409.69.935 409.69.99 Glass retaining profile for stabilisation and as clatter prevention for the inserted panel of glass Plastic Transparent 3,000 mm 403.04.430 Please order securing bracket to prevent cabinet from tipping FF.93