Product Recommendations for BMW and MINI Workshops Testing and Safety Technology Suspension Technology Lifting Technology
MAHA stands for high-tech vehicle inspections and workshop fitting. As one of the most productive manufacturers, the company supplies workshop fitting that covers the entire range from test benches and vehicle lifts to various inspection devices for cars, utility vehicles, motorbikes and special-purpose vehicles. With the option of linking individual test devices to form universal test lanes, MAHA has become a skilled technical partner all over the world. MAHA products meet the highest quality standards, represent reliability and a long service life and satisfy the most demanding requirements. Founded by Winfried Rauch in 1969, the company has since become a pioneer in many areas of workshop fitting. As a company that pioneers and inspires, we enjoy exploring new avenues. Our many years of experience and innovative technical developments allow us to lead the market. MAHA employs over 1,200 workers in over 150 countries worldwide and is represented internationally by agencies and its own branch offices. This allows customers the world over to be provided with high-quality testing and lifting equipment. The lean company structures and direct communication channels allow products to be adapted to suit the legislation of each country with great flexibility. With a commitment to providing quality, reliability and value for money. In addition to hardware, MAHA provides powerful software solutions for linking test systems. This is accompanied by consulting services for the planning and implementation of construction projects and efficient direct check-in. The company s skills thus extend far beyond pure machine engineering. 2
Contents Testing and Safety Technology MBT 2200 LON BMW 4 MBT 2250 EUROSYSTEM BMW 6 Suspension Technology MSD 3000 EURO BMW 8 Lifting Technology MAPOWER II 3.2 BMW 10 ECON III 5.0 BMW 12 CARLIFT II 4.0 W BMW 14 TWIN F IV 3.0 U L BMW 16 ES 93 BMW 18 ZS SQUARE II 3.5 S BMW 20 ZS SQUARE II 3.5 FS BMW 22 ZS SQUARE II 3.5 FS RFH BMW 24 ZS SQUARE II 3.5 FT BMW 26 VS SQUARE II BMW 28 3
MBT 2200 LON BMW Roller brake tester for cars and transporters with up to 3.5 t axle load BMW part no.: 81 32 2 213 263 / 81 32 2 213 264 Analogue display with two dial gauges and integrated control cabinet Roller set MBT 2000 RS 2 Roller surface with plastic coating Differential display 3-digit digital display (output as percentage) LED bars with 3-colour rating Operator control via alphanumeric display Radio remote control RECO 1 incl. receiver module Connection and adjustment, with 10 m cable Coating: Display: pure white RAL 9010 Floor unit: galvanised Extension with floor-unit shock absorber tester possible Model: MSD 3000 EURO BMW (81 32 2 159 913) 4
81 32 2 146 611 Wall mount for multi-analogue display (with 2 or 4 dial gauges), pivotable by 180 81 32 2 146 618 Operating hour meter 81 32 2 146 612 Base for multi-analogue display (with 2 or 4 dial gauges), pivotable by 180, for free-standing installation 81 32 2 146 613 Roller set cover, able to support 4 t vehicles, for RS 2, optionally removable, can fold inwards or outwards (not for use with lifting bar) 81 32 2 146 616 Lifting bar, automatic, with photoelectric sensor for MBT 2xxx/3000 roller set closed 81 32 2 146 621 Rotation and measurement direction can be switched manually (via display), on both sides or one (non-regulated 4WD test) 81 32 2 146 622 Foundation cladding, galvanised, for floor unit MBT 2000 RS no. 2 81 21 2 153 912 Foundation cladding, galvanised, for complete floor unit assembly MBT 2000, MSD 3000 81 32 2 146 617 Emergency stop pushbutton 81 32 2 298 632 Supplementary package, Brake Tester Guidelines Model: Guidelines 2011 Permissible axle load Track width min./max. Drive power Test speed Roller diameter Roller axle distance Fuse Power supply Display range Display dimensions, standard (W x H x T) 3500 kg 780 / 2200 mm 2 3 kw 5 km/h 202 mm 400 mm 25 A, slow 3 x 400 V/N/PE, 50 Hz 0 8 kn 870 x 630 x 240 mm 5
MBT 2250 EUROSYSTEM BMW Roller brake tester for cars and transporters with up to 3.5 t axle load BMW part no.: 81 32 2 213 265 / 81 32 2 353 963 Communication desk MCD 2000 with integrated control cabinet Roller set MBT 2000 RS 2 Roller surface with plastic coating Industry PC, compact, with Windows 7, in metal housing incl. ext. DVD burner PC keyboard and mouse PC flat screen 22 (TFT standard) Holder for Compact PC for fastening PC to communication desk Printer compartment for MCD Infrared remote control IFB3 Connection and adjustment, with 10 m cable Floor unit: galvanised Extension with floor-unit shock absorber tester possible Model: MSD 3000 EURO BMW (81 32 2 159 913) 6
81 32 2 146 613 Roller set cover, able to support 4 t vehicles, optionally removable, can fold inwards or outwards (only removable option suitable for use with lifting bar) 81 32 2 146 616 Lifting bar, automatic, with photoelectric sensor for MBT 2xxx/3000 roller set closed 81 32 2 146 617 Emergency stop pushbutton 81 32 2 146 621 Rotation and measurement direction can be switched manually (via display), on both sides or one (non-regulated 4WD test) 81 32 2 146 624 Four-wheel drive regulator set, Visco and Rigid drive, with pedal-force sensor and remote control IFB 3 (regulated 4WD test) 81 32 2 146 622 Foundation cladding, galvanised, for floor unit MBT 2000 RS no. 2 81 32 2 146 618 Operating hour meter 81 21 2 153 912 Foundation cladding, galvanised, for complete floor unit assembly MBT 2000, MSD 3000 81 32 2 298 632 Supplementary package, Brake Tester Guidelines Model: Guidelines 2011 81 32 2 352 368 Pedal force meter with radio module for data transmission to the brake tester incl. USB radio receiver. Model: PFM 1000 Permissible axle load Track width min./max. Drive power Test speed Roller diameter Roller axle distance Fuse Power supply Display range Communication desk dimensions (W x H x T) 3500 kg 780 / 2200 mm 2 3 kw 5 km/h 202 mm 400 mm 25 A, slow 3 x 400 V/N/PE, 50 Hz 0 8 kn 860 x 1500 x 420 mm 7
MSD 3000 EURO BMW Shock absorber tester (standalone) BMW part no.: 81 32 2 159 913 / 81 32 2 159 915 Shock absorber tester for cars and transporters with up to 2.5 t axle load Model: MSD 3000 EURO BMW Floor unit: galvanised Communication desk EUROSYSTEM for car and truck test benches (with electronics) Model: MCD 2000 Control cabinet for test bench operation LON USB card (external card, USB port required) incl. EUROSYSTEM software Drawer with lock for keyboard and PC mouse with storage compartment for stationery etc. Monitor mount prepared to VESA standard Powder coating: Control cabinet window grey, RAL 7040 Side walls anthracite grey, RAL 7016 8
Computer with Windows 7, DVD-ROM drive, PC wheel mouse 81 32 2 159 916 Noise detection module, wireless operation, for MSD 3000 (only in conjunction with infrared remote control and PC) PC keyboard 81 32 2 146 614 Foundation cladding, galvanised, for floor unit MSD PC flat screen 22 (TFT standard) 81 32 2 146 614 Chequer plate cover, galvanised, for pre-fabricated shock absorber tester foundation IFB3 infrared remote control, pedal-force sensor connection, rechargeable battery and charger box External PC storage compartment for communication desk MCD Printer compartment for communication desk MCD Axle load, test capacity 2200 kg Axle load, support capacity 2500 kg Drive power (2 x) 2 1.1 kw Excitation lift 6.5 mm Excitation frequency (regulated) 2 10 Hz Maximum plate lift approx. 70 mm Track width min./max. 880 2200 mm Measurement range, damping factor D 0.02 0.3 Power supply 230 V, 50/60 Hz Fuse 16 A, slow 9
MAPOWER II 3.2 BMW Two post lift with 3.2 t load capacity BMW part no.: 81 22 2 289 197 Two posts with control panel Two support arms long, two support arms short, double-telescoping Support disc plug-in system Overhead cable tray Spindle oil (0.25 l) Operating instructions Packaging incl. Double-telescoping support arms BMW design for MAPOWER II 3.2 (short arm 480 850 mm, long arm 895 1405 mm) Additional control panel on counter-post Coating: Support arms: anthracite grey RAL 7016 Posts: pure white RAL 9010 10
81 22 2 289 198 Energy set on counter-post 1 x compressed air, 1 x 230 V power socket 81 22 2 289 200 Installation accessories w/o. floor set-up 81 22 2 289 199 MAHA stainless steel storage tray for small parts, magnetic (2 pcs.) 81 22 2 289 206 Installation accessories for floor set-up max. 80 mm 81 22 2 146 567 Photoelectric sensor as ceiling impact protection Details: Posts rotated by 45, allowing vehicle doors to open wide, optimum door stop protection thanks to rubber tube profiles on lifting carriages. Very low minimum pad height < 100 mm Load capacity CE Max. lifting height Raising/lowering time Double-telescoping support arms, short Double-telescoping support arms, long Minimum pad height, support arms Adjustment range, support disc Total width Drive power Fuse Power supply 3200 kg 2000 mm 40 / 40 s 480 850 mm 895 1405 mm 95 mm 90 125 mm 3223 mm 2 3.0 kw 16 A, slow 3 x 400 V, 50 Hz 11
ECON III 5.0 BMW Two post lift 5.0 t with telescoping support arms BMW part no.: 81 21 2 320 297 / 81 21 2 250 181 Two posts with control unit Four support arms, double-telescoping Support disc plug-in system Overhead cable tray Operating instructions Packaging incl. Four double-telescoping support arms with minimised pad height 94 mm, extension range 780 1490 mm Energy set on control post 1 x 230 V power socket; 1 x compressed air Coating: Support arms: anthracite grey RAL 7016 Posts: pure white RAL 9010 12
81 22 2 146 565 Additional control unit on counter-post (not in conjunction with special voltage) 81 22 2 289 208 Installation accessories w/o. floor set-up 81 22 2 146 566 Energy set on counter-post 1 x power socket, 1 x compressed air (only in conjunction with additional control unit on counter-post) 81 22 2 289 199 MAHA stainless steel storage tray for small parts, magnetic, 2 pieces 81 22 2 289 209 Installation accessories for floor set-up max. 80 mm 81 22 2 146 567 Photoelectric sensor as ceiling impact protection Details: No-wear, no-maintenance proximity switch Tension-free lower spindle bearing thanks to pivoting slide bearing Load capacity CE 5000 kg Max. lifting height 2020 mm Raising/lowering time 70 s Minimum pad height, support arms 140 mm Extension range, support arms 780 1490 mm Adjustment range, support disc 95 125 mm Total width 3900 mm Post height (excl. overhead cable tray) 3138 mm Drive power 2 3.5 kw Fuse 16 A, slow Power supply 3 x 400 V, 50 Hz Required concrete quality C 20/25 13
CARLIFT II 4.0 W BMW Four post lift for wheel alignment BMW part no.: 81 22 2 213 245 / 81 22 2 213 244 Four post lift with electro-hydraulic drive unit Wheel alignment design Special runway profile for high bending stiffness Reinforced crossbar Runways can be finely adjusted in relation to crossbar Control unit Two long ramps, two roll-over bars for surface mounting Operating instructions Standard packaging incl. Bore hole pattern in runways for BMW wheel alignment accessories Coating: Runways, crossbars: anthracite grey RAL 7016 Posts: pure white RAL 9010 14
Variants: Smooth runway w/o wheel-free jack, w/o convenience kit 81 22 2 213 245 Posts and assembly 81 22 2 213 244 Drive rails w/o wheel-free jack Runway w/o wheel-free jack, with convenience kit for preparation 4 x turning plates 81 22 2 213 245 Posts and assembly 81 22 2 213 244 Drive rails w/o wheel-free jack 81 22 2 146 599 Compensating plates for missing wheel-free jack 81 22 2 162 361 Compensating/support plates for turning plates, rear Runway w/o wheel-free jack, with convenience kit for preparation 2 x turning plates and 2 precision sliding plates 81 22 2 213 245 Posts and assembly 81 22 2 213 244 Drive rails w/o wheel-free jack 81 22 2 146 599 Compensating plates for missing wheel-free jack 81 22 2 146 598 Precision sliding plates, rear (2 pcs.) Runway with wheel-free jack, with convenience kit for preparation 4 x turning plates 81 22 2 213 245 Posts and assembly 81 22 2 146 601 Drive rails with wheel-free jack 81 22 2 146 600 Compensating/support plates for turning plates, front 81 22 2 162 361 Compensating/support plates for turning plates, rear Runway with wheel-free jack, with convenience kit for 2 x turning plates and 2 precision sliding plates 81 22 2 213 245 Posts and assembly 81 22 2 146 601 Drive rails with wheel-free jack 81 22 2 146 600 Compensating/support plates for turning plates, front 81 22 2 146 598 Precision sliding plates, rear (2 pcs.) Rolls-Royce design: Runway 4.8 m w/o wheel-free jack, with convenience kit for preparation 2 x turning plates and 2 precision sliding plates 81 22 2 213 245 Posts and assembly 81 22 2 213 247 Drive rails for Rolls-Royce incl. precision sliding plates, rear (2 pcs.), w/o wheel-free jack Recommended accessories: 81 22 2 146 597 Lights (set of 4) for CARLIFT II Installation accessories, four post lift 81 22 2 146 573 Axle lift, hydropneumatic: scissors jack with 2.6 t load capacity Model: AL II 2.6 PH BMW Incl. height-adjustable lifting saddle for central vehicle support with axle lift AL II Incl. hard-rubber blocks h = 50 mm Supplied by MAHA Technical data: Load capacity Power supply Total width Motor power Raisng/lowering time Lifting height Drive-on height Runway width Runway length 4000 kg 400 V, 50 Hz, 16 A 3350 mm 2.2 kw 40 s 1900 mm 170 mm 630 mm 4400 / 4800 (Rolls-Royce) mm 15
TWIN F IV 3.0 U L BMW Twin scissors lift, flush-mounted BMW part no.: 81 21 2 414 383 Twin scissors lift Model: TWIN F IV 3.0 U Foundation inserts for extending the support plates Control console, standing, with controller and hydraulic power unit Hydraulic hoses and cabling for 2 m distance between lift and power unit Operating instructions Packaging incl. Increased extension length 2165 mm Hard-rubber blocks h = 50 mm (8 pcs.) (VZ 975100) 5x extension of hydraulic hose per metre Coating: Scissor assembly: anthracite grey, RAL 7016 Support plates, drive-on ramps: anthracite grey, RAL 7016 Control console: anthracite grey RAL 7016 (standard) 16
Installation accessories (heavy-duty anchors M 10 x 100) Supplied by MAHA Details: Eight stackable hard-rubber blocks to hold vehicles with elevated ground clearance. Easy to use thanks to continuously extendable support plates Large extension range for very long vehicles with a maximum length of 2165 mm. For manoeuvring when little entry clearance is available, the flush-mounted TWIN F can also be driven over diagonally. Load capacity Installation depth Lifting height Total width, foundation (recommended) Width, support plate Length, support plate Operating pressure Raising/lowering time approx. Hydraulic power unit Power supply Fuse Hydraulic oil volume (not included in delivery) 3000 kg 115 mm 1810 mm 2000 mm 605 mm 1550 2165 mm 260 bar 35 s 2.2 kw 3 x 400 V, 50 Hz 16 A, slow 9 l 17
ES 93 BMW One post inground lift with H supports BMW part no.: 81 21 2 250 183 / 81 21 2 250 182 One post inground lift 3.0 t with flat head supports Model: ES 93 FT H-support, hot-dip galvanised Four hard-rubber blocks, h = 50 mm Packaging incl. Control unit: anthracite grey RAL 7016 18
Required accessories: Recommended accessories: 81 21 9 429 127 Installation box DEC 19.110 81 21 2 146 578 Installation frame for lift w/o box, Model: SWL 30 81 21 2 146 577 Positioning aid to ensure box is installed level with the ground (required for each lift, where retrofitted) 81 22 2 146 579 Assembling cladding for surface mounting 81 21 2 407 479 Retrofit set for extended flat support bridge extensions 1400 2200 mm Grating 2 x 4 m, 1000 kg wheel load incl. installation frame on request. Supplied by MAHA. Details: Flat haed supports with 100 mm extended support area (1 set = 2 pcs.). (suitable for BMW models G11, G12 and RR 01) Supplied by MAHA. Grating for removal of water and dirt Technical data: Load capacity CE Lifting height Installation depth Cylinder diameter Raising/lowering time roughly Extension range Motor power Hydraulic oil volume 3000 kg 1930 mm 2380 mm 125 mm 35 s 1400 2000 mm 3.0 kw, 400 V, 16 A 50 l 19
ZS SQUARE II 3.5 S BMW Two post inground lift with swing arm supports BMW part no.: 81 21 2 284 724 Two post inground lift 3.5 t with swing arm supports Model: ZS SQUARE II 3.5 S BMW Swing arm supports (K), double-telescoping support arms with special take-up area for widely spaced take-up points and 50 mm support disc raiser Audible safety signal control ( CE stop ) Packaging incl. Coating: Support arm: anthracite grey, RAL 7016 Support arm crossbar: anthracite grey, RAL 7016 Control unit: anthracite grey RAL 7016 20
Required accessories: Recommended accessories: 81 21 2 250 186 Installation box with clamping system Model: DVJC 19.230 81 21 2 146 577 Positioning aid for box 81 21 2 146 582 Cover, hot-dip galvanised, able to support vehicle, for empty box K (axle loads of up to 4 t) Details: Technical data: Load capacity Cylinder spacing Lifting height Drive-through clearance Installation depth Dimensions, square tube with 45 turn Raising/lowering time roughly Motor power Hydraulic oil volume 3500 kg 2300 mm 1900 mm 2034 mm 2400 mm 180 x 180 mm 30 / 20 s 3.0 kw, 400 V, 16 A 28 l 21
ZS SQUARE II 3.5 FS BMW Two post inground lift with runways BMW part no.: 81 21 2 250 191 / 81 21 2 250 192 Fig. with optional floor cover Two post inground lift 3.5 t with runways 4400 mm Model: ZS SQUARE II 3.5 FS BMW Standard packaging incl. Coating: Runways: anthracite grey, RAL 7016 Control unit: anthracite grey RAL 7016 Also available with floor cover upon request 22
Required accessories: Recommended accessories: 81 21 2 298 916 Installation box with clamping system DVJC 19.135 81 21 2 352 303 LED lighting inside the runways (double) (1 light per runway) 81 22 2 146 573 Details: Axle lift, hydropneumatic Scissor lift with 2.6 t load capacity Model: AL II 2.6 PH BMW Incl. height-adjustable lifting saddle for central vehicle support with axle lift AL II Incl. hard-rubber blocks h = 50 mm Level workshop floor Drive-on ramp for flush-mounted runways Technical data: Load capacity Total width Dimensions per runway L x W x H Lifting height Installation depth Dimensions, square tube with 45 turn Raising/lowering time, dependent on load, approximately Motor power Hydraulic oil volume 3500 kg 2074 mm 4400 x 617 x 126 mm 1900 mm 2400 mm 180 x 180 mm 30 / 20 s 3.0 kw, 3 x 400 V, 16 A 28 l 23
ZS SQUARE II 3.5 FS RFH BMW Two post inground lift with runways and wheel-free jack BMW part no.: 81 21 2 298 611 / 81 21 2 250 193 Fig. with optional floor cover Two post inground lift 3.5 t with runways 4400 mm Model: ZS SQUARE II 3.5 P Standard packaging incl. Coating: Runways: anthracite grey, RAL 7016 Control unit: anthracite grey RAL 7016 Also available with floor cover upon request 24
Required accessories: 81 21 2 298 916 Installation box with clamping system DVJC 19.135 Recommended accessories: 81 21 2 352 303 LED lighting inside the runways (double) (1 light per runway) 81 22 2 146 573 Axle lift, hydropneumatic Scissor lift with 2.6 t load capacity Model: AL II 2.6 PH BMW Incl. height-adjustable lifting saddle for central vehicle support with axle lift AL II Incl. hard-rubber blocks h = 50 mm 81 21 2 146 587 Compensating plates to wheel-free jack level adjustment for 4400 mm runway Details: Wheel-free jack in action Installed flush with floor Technical data: Lift: Wheel-free jack: Load capacity 3500 kg Support surface granulate-coated Total width 2074 mm Full travel 450 mm Dimensions per runway L x W x H 4400 x 617 x 170 mm Extension range 1400 2100 mm Lifting height 1900 mm Installation height above runway, approx. 60 mm Installation depth 2400 mm Size of sliding plates (L x W) 450 x 605 mm Dimensions, square tube with 45 turn 180 x 180 mm Dimensions, support plate 1400 / 2100 x 670 mm Ratsing/lowering time, dependent on 30 / 20 s load, approximately Motor power 3.0 kw, 3 x 400 V, 16 A Hydraulic oil volume 28 l 25
ZS SQUARE II 3.5 FT 140-220 BMW Two post inground lift with flat head supports BMW part no.: 81 21 2 411 761 Two post inground lift 3.5 t with flat head supports Model: ZS SQUARE II 3.5 FT Audible safety signal control ( CE stop ) 2 sets of flat head supports, extended by 100 mm 4 hard-rubber blocks, h = 50 mm Cover, hot-dip galvanised, able to support vehicle, for R lift installation in wide installation box Standard packaging incl. Coating: Flat head supports: hot-dip galvanised Control unit: anthracite grey RAL 7016 26
Required accessories: Recommended accessories: 81 21 2 250 186 Installation box with clamping system, cylinder distance 2300 mm Model: DVJC 19.230 or 81 21 2 298 916 Installation box with clamping system, cylinder distance 1350 mm Model: DVJC 19.135 81 21 2 146 577 Positioning aid for box 81 21 2 146 582 Cover, hot-dip galvanised, able to support vehicle, for empty box K (axle loads of up to 4 t) 81 21 2 407 479 Retrofit set for flat head support extensions with increased length 1400 2200 mm Details: 4 x hard-rubber blocks, h = 50 mm Technical data: Load capacity Cylinder spacing Lifting height Installation depth Dimensions, square bar with 45 turn Raising/lowering time, dependent on load, approximately Extension range Motor power Hydraulic oil volume 3500 kg 1350 mm 1900 mm 2400 mm 180 x 180 mm 30 / 20 s 1400 2200 mm 3.0 kw, 3 x 400 V, 16 A 28 l 27
VS SQUARE II BMW Four post inground lift with wheel-free jack, surface- or flush-mounted Two post inground lift 5.0 t with runways 4400 mm and wheel-free jack Model: VS SQUARE II BMW Lowering device for wheel alignment Rubber block set, pyramid shape h = 60 mm, 150 x 150 mm (4 pcs.) Folding drive-on ramp 1600 mm for surface-mounted lift (2 pcs.) For flush-mounted runways: Use drive-over flaps in place of drive-on ramps (4 pcs.) Coating: Runways: anthracite grey RAL 7016 Control unit: anthracite grey RAL 7016 28
Variants: Surface-mounted with wheel-free jack BMW part no.: 81 21 2 320 364 + 81 21 2 320 360 + 81 21 2 320 362 Flush-mounted with wheel-free jack and floor cover BMW part no.: 81 21 2 320 373 + 81 21 2 320 360 + 81 21 2 320 362 81 21 2 320 365 Installation box with clamping system for lift and power unit, Model: QEC 19.175 2 x required (for front and rear) 81 22 2 162 361 Compensating plate set for turning plates, rear (in place of precision sliding plate) 81 21 2 320 368 Compensating plate set 5.0 RFH, For turning plates (front) and sliding plates (rear), granulate-coated 81 21 2 320 365 Installation box with clamping system for lift and power unit, Model: QEC 19.175 2 x required (for front and rear) 81 21 2 320 371 Floor cover, pneumatic, for VS runway 4400 mm (only in conjunction with installation frame 81 21 2 320 367) 81 21 2 320 367 Installation frame for VS runway 4400 mm, sunk, with floor cover (permanent formwork) 81 22 2 146 598 Accessories for both variants: 81 21 2 352 303 LED lighting inside the runways, double (1 light per runway) Precision sliding plates L x W x H = 1150 x 600 x 50 mm 81 21 2 320 368 Compensating plate set 5.0 RFH, for turning plates and sliding plates, granulate-coated 81 21 2 320 375 Roll-off guard, automatic (2 pieces) only for flush-mounted runways (2 sets required) Technical data: Lift: Wheel-free jack: Load capacity 5000 kg Load capacity 3500 kg Total width 2270 mm Support surface granulate-coated Dimensions per runway L x W x H 4400 x 630 x 175 mm Full travel 440 mm Cylinder spacing 1580 mm Installation height above runway, approx. 69 mm Cylinder spacing in driving direction 3400 mm Large extension plate, front (L x W) 350 x 670 mm Max. lifting height 2050 mm Large extension plate, rear (L x W) 650 x 670 mm Installation depth 2400 mm Dimensions, support plate 1400 / 2100 x 670 mm Dimensions, square tube with 45 turn Raising/lowering time, dependent on load, approximately Motor power Hydraulic oil volume 180 x 180 mm 38 / 38 s 2 x 3.0 kw, 3 x 400 V, 16 A 56 l 29
30 Product Recommendations for BMW and MINI Workshops
31
GLOBAL PLAYER... in more than 150 countries worldwide Subsidiaries Australia Brazil Canada Chile China France India Ireland Japan New Zealand The Philippines Poland Russia Serbia Singapore Spain South Africa Thailand UK USA Vietnam West Africa MAHA Maschinenbau Haldenwang GmbH & Co. KG Hoyen 20 87490 Haldenwang Germany Tel.: +49 8374 585 0 Fax: +49 8374 585 497 Internet: www.maha.de Email: sales@maha.de BRS70401-en 02 Subject to change without notice! The illustrations also show options which are not standard equipment.