Waterjet Cutting Machine The system consists of an extremely high pressure generator; CNC Control System; Automatic garnet feeding system, and a high - tech CAD/CAM system. This cold cutting equipment features hi gh cutting speed, superior effi ciency; no thermal deformation; no atmospheric contamination ; almost no limitation of materials, and there is almost no limitation to cutting of intr icate designs in normally diffi cult to cut substances. It can cut metal, stone, ceramic tiles, laminated glass, rubber, plastic and many other materials. Features include:
Waterjet Cutting Series Integral structured X, Y machine frame with high strength and stability. Integral metal plates covering and protecting the X, Y machine frame, ensuring accuracy and an extension of service life. Ball screw and linear straight rails, ensuring machine stability and accuracy. Ball screws driven by servo motors, ensuring high accuracy, speed and efficiency. The Bridge-type machine uses twin servo motors and a twin ball screw synchronization system.
Specifications Type Jetstream I Jetstream II Structure Type Cantilever Type Bridge Type 1250 1250 1500 2000 1500 2500 2500 2000 3000 2000 3000 2500 Cutting Size( X Y) 1500 3000 1500 4000 2000 3000 4000 2000 4000 2500 6000 2500 2000 4000 2000 6000 3000 8000 3000 12000 Z Axes Traveling Distance 150 Cutting Accuracy ±0.10 Accuracy of Repeat Positioning ±0.05 Controlling System PC Controller/ AC Servo System PC Controller/ AC Servo System Note: Special orders are available and manufactured upon customer s request.
PC Control System Uses standard windows PC with Jetstream Motion Controller PCB and Jetstream Control Software. D isplays graphic cutting and cutting parameters at the same time. A utomatic generation of NC machining program. D ata input can be via USB stick or through the network. C AD design software can be loaded onto the PC or a stand - alone unit. M ultiple origin points can be set. R epeat cuts can easily be acco mmodated. Auto Garnet Feeding System
Ultra-High Pressure Generator Principle The ultra-high pressure waterjet cutting machine, which is under the constraints of nozzles with very small diameter, is to make pressurization of ordinary tap water up to 600Mpa through a high pressure generator. The ultra-high pressure waterjet cutting machine will be formed with this powerful high-speed "water column" and a small amount of abrasive material added, which is referred to as "abrasive waterjet cutting". Applications in the fields of industries: aerospace, construction and renovation, machinery and ships, glass industry, military industry, textile and paper, automotive industry, power industry, wood processing, advertising industry and electronics industry. Schematic Diagram of the High Pressure System
Ultra-High Pressure Generator HPG30 HPG40 Specifications Max Pressure MPa Two Stage Pressure Ratio 20:1 Max Water Flow 3.0L/min 3.7L/min Orifice Diameter 0.26 0.30 0.33 Water Inlet Pressure 0.2MPa Power of Main Motor 30KW 37kw Power Supply Voltage 380V/50HZ
Two Stage Boosting System Two Stage Soft Start Boosting System designed for cutting glass and other fragile materials, enables low pressure drilling and high pressure cutting and greatly reduces the incidence of damage to glass etc when drilling under high pressure. Loading /Unloading Lifting system Ensuring safe and convenient loading and unloading of fragile materials such as glass, onto and off the cutting table, greatly reducing the incidence of accidental material damage and increasing the work safety conditions of the water jet operators.