Turbine Flow Meters Flow Technology Turbine Flow meters are commonly used in mission critical applications demanding superior accuracy, quality and reliability. Ideal for clean liquids and gases, such as fuels, hydraulic fluid, lubricating oils, DI water, industrial gases, process chemicals, etc. Principle of Operation Turbine Flow meter is a volumetric flow measuring instrument. The flow sensing element is a freely suspended, bladed rotor positioned axially in the flow stream with the flowing fluid pushing against the blades. The rotational speed of the rotor is proportional to the velocity of the fluid. Since the flow passage is fixed, the turbine rotors rotational speed is also a true representation of the volume of fluid flowing through the flow meter. The rotation of the turbine rotor generates electrical pulses in the pickoff that is attached to the flow meter housing in close proximity to the turning rotor. Each one of these pulses represents a discrete volume of fluid. The frequency or pulse repetition rate represents the volumetric flow rate and the accumulated pulse total represents the total volume measured.
Turbine Flow Meters Model FT Series HS Series SA Series Description FT Series turbine flow meters utilize a proven flow measurement technology to provide exceptionally accurate and reliable digital outputs. Because of their versatility, these turbine flow meters are the solution for a wide variety of liquid and gas flow sensing applications. Meter sizes range from 3/8 inch to 4 inches HS Series "high shock" turbine flow meters are specifically designed to withstand pressure spikes that create hydraulic shock waves in fluids when actuators or rams are activated. They are available in size from 1/2 inch to 2/5 inches, and are capable of measuring liquid flow rate from 0.03 to 400 GPM (0.1 to 1510 LPM) SA Series sanitary turbine flow meters, provide accuracy, versatility and economy in measuring a wide variety of food, beverage and pharmaceutical products. The meter features 316SS construction, and has a smooth finish which is designed to eliminate cracks and crevices where bacteria breed. Available up to 250 GPM Omniflo turbine flow meters are tangential flow transducers capable of measuring very low flow rates in either liquid or gas. These high resolution, volumetric flow sensing instruments provide excellent speed of response and repeatability. Flow range 0.001 to 2 GPM. Omniflo
Electronic for Turbine Flow Meters Pickoff/Amp Flow Technology provides a wide variety of amplifiers, transmitters, and displays to meet each customer s unique needs. TWA LinearLink Ling TCI BR30 FC70 SL91/SL92
Positive Displacement Flow Meters Positive displacement (PD) flow meters are the meter of choice for high viscosity or high pressure applications such as resins, polyurethanes, adhesives, paints, liquid sugars, syrups and for environments ranging from adhesive dispensing to methanol injection. Only two moving parts ensures reliability for critical applications. Principle of Operation FTI positive displacement flow meters use two rotating impellers driven by the flowing liquid. Magnets imbedded in the impellers activate a non-intrusive sensor which generates a pulsed output signal. Each pulse represents a known volume of liquid that is captured in between the lobes of the impellers. A K-factor converts the pulses into engineering units for remote data collection and digital display. Assembly Diagrams
Positive Displacement Flow Meters Model DC-I Series DC-F Series HP-I Series BL Series Description General industrial in-line flow meters is ideal for a wide variety of liquid flow applications. These applications include, but are not limited to, paints, resins, petrochemicals, lubricants, fuels, polyurethanes and adhesives. Size : 1/8 up to 2 Max. Flow : 379 L/min (100 GPM) Max. Pressure : 250 psig Max. Temp : 204ºC Sanitary model in-line flow meters is ideal for liquid flow applications in the food, dairy, and pharmaceutical industries. Size : 1/8 up to 2 Max. Flow : 379 L/min (100 GPM) Max. Pressure : 250 psig Max. Temp : 204ºC HP-I Series positive displacement flow meter is ideal for liquid flow applications where process pressure is above 1,000 psig. Applications may include hydraulics, polymers, polyurethanes, plastics and adhesives. Size : 1/8 up to 1 Max. Flow : 94.6 L/min (25 GPM) Max. Pressure : 3000 psig Max. Temp : 204ºC BL Series positive displacement flow meter is ideal for high pressure applications, such as methanol injection. Flow Technology s unique boltless pressure vessel design provides inherent corrosion resistance in a compact, easy-to-maintain package Size : 1/16 up to 1 Max. Flow : 94.6 L/min (25 GPM) Max. Pressure : 15000 psig Max. Temp : 204ºC TrickleMeter is ideal for measuring very low flows of low- to high-viscosity liquids. Size : 1/16 up to 1 Max. Flow : 1.9 L/min (0.5GPM) Max. Pressure : 1000 psig Max. Temp : 232ºC Trickle
Electronic for Positive Displacement Flow Meters CA03/PA03 TWA BR30 SL90
Electromagnetic Flow Meters FTI mag meters have an innovative magnetic flux path profile that ensures accuracy over a 1000:1 turndown. The EL Series meters are ideally suited for accurately measuring the flow rate of conductive liquids and slurries. Magnetic flow meters are used in virtually every processing industry and represent a very cost effective solution : Food and Beverage, Chemical, Water & Waste, Mining, etc. EL 2200 For general industrial application EL 2400 Sanitary model for foods and beverage industrial application EL 500 For low flow applications (to 0.05 GPM) EL 1222 Insertion Mag for pipe line size 1.5 to 40 Electronic for Electromagnetic Flow Meters The MC608 Transmitter is our most versatile unit capable of displaying rate and total flows as well as providing multiple digital output, analog output and RS485 communication. The MC608 is available in a cylindrical aluminum instrument enclosure and can be interfaced all Magnetic Flow meter. Input power options for MC608 are AC, DC or battery. The MC106 Transmitter can be interfaced to all Magnetic Flow meter and provides an economical solution for applications that primarily require a single output. There are three versions of MC106 that enable the user to select the attributes that will deliver the most cost effective solution.
Ultrasonic Flow Meters Clamp-on Ultrasonic Flow meter stands for continuity and long-term reliability. Flow measurement can be done anywhere and startup is immediate. The clamp-on flow meter with its robust industrial construction and re-greasing concept provides a revolutionary solution for easy handling and reduced maintenance costs Transit time ultrasonic devices measure fluid flow using Principle of Operation two bi-directional ultrasonic transducers /receivers; T1 and T2. T1 sends a signal to the downstream transducer T2 and T2 reciprocates. Under zero flow conditions, the time T1 is equal to T2. Under flowing conditions, T1 is less than T2. The inequality between T1 and T2 is directly proportional to the velocity of the flowing medium. SLF-100 Designed for PFA tube Line size 3/8", 1/2", 3/4" PFA tube Accuracy +/-2.0% of reading Outputs 1 analog, 1 pulse Rate and total display 4-20mA output SLF-500 SLF-200 1" to 6" line sizes Accuracy +/-2.0% of reading Outputs 1 analog, 1 pulse Panel Mount enclosure Rate and total display 4-20mA output 1" to 12" line sizes Accuracy +/-2.0% of reading Outputs 1 analog, 3 pulse Wall Mount IP65 enclosure 85 to 264 VAC, 50/60 Hz Average time for unsteady flow 4-20mA output RS232 serial communications