GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item Material S STM ody uctile Iro 2789 Gr 500/7 oated 536 705005 oated isc uctile Iron 2789 Gr 500 /7 PM ncapsulate 536 705005 PM ncapsulated Shaft Stainless Steel 970 416 S21 ISI 416 ushings PT Orings PM o K J 73 140 85 96 53 61.5 7.2 65 76 140 85 96 53 61.5 89 114 165 175 210 97 155 96 118 53 53 53 150 168 210 155 53.0 15.7 200 219 257 180 134 80 198.0 175 165 200 160 32 24.1 250 273 314 230 160 80 248.0 175 165 200 160 44 37.0 300 324 339 260 166 80 298.0 175 165 200 160 66 43.3 75.0 97.0.0 Wt. Kg. 7.2 7.8 9.8 15.7 Notes 1. Grooved ends available for NSI/Metric and WW pipe. 2. Pressure and temperature ratings require the use of couplings with equivalent pressure ratings. 3. Top lange conforms to ISO 5211/1 4. Gearbox supplied as standard with gear operator, position indicator and tamper switch. 5. omplies with and meets the requirements of LP (S5306 Part2) 2006 Rapidrop Limited
ata Sheet 1.2 Issue (New esign) RG 300 Grooved utterfly Valve ugust 2009 M pproved / UL Listed Max Working Pressure: 20.7 ar Max Test Pressure: 41.4 ar Max Working Temperature: 120º actory installed ouble Tamper Switch for indoor and outdoor use. Pipe O/ G Weight Kg 65 73 105 85 96.4 73.0 135 135 128 9.0 65 76 105 85 96.4 76.1 135 135 128 9.0 80 100 89 114 112 92 108 96.4.4 88.9 114.3 142 175 135 135 128 128 9.8 11.0 150 165 179 132.4 165.1 209 193 220 6.8 17.4 150 168 179 132.4 168.3 209 193 220 6.8 17.4 200 219 204 170 147.4 219.1 234 193 220 24.2 22.8 Item Material ody STM 536 Nylon11 oated isc STM 536 PM ncapsulated Upper & Lower Stems ISI 420SS Worm Gear Shaft ISI 410SS ousing STM 536 and Wheel STM 536 lag Indicator STM 536 Shear Pin STM 510 Segment Gear STM 148 or 584 ousing Gasket PM Grade ORings (ll) PM Grade 2010 Rapidrop Limited LIST US
T/G 175 ronze utterfly Valve UL Listed / M pproved escription range 1 1/4, 1 1/2 NPT threaded with optional grooved adaptors. 2 grooved only. Max Working Pressure: 12 ar Max Test Pressure: 25 ar Max Working Temperature: 120º actory installed UL Listed ouble Tamper Switch for Indoor and Outdoor Use NPT/Grooved 32 40 50 Pipe O/ 42.2 48.3 60.3 54 49 67 56 41.0 140 60 70 73 59 61.3 140 N/ N/ 114 64 49.0 N/ Overall length with grooved adaptors Weight Kg 1.7 1.9 2.3 Item ody STM STM 505 isc STM 584 PM ncapsulated Upper Stem STM 564 Type XM 12 Lower Stem STM 564 Type XM 12 Gear ousing ove STM 619 and Wheel STM 619 lag Indicator STM 16 York Mechanism STM 283 Stem ushing STM 16 onduit onnector STM 307 ORings (ll) PM Grade over Gasket NR 2009 Rapidrop Limited LIST US
GP 230 Wafer utterfly Valve Max Working Pressure: 16 ar ydraulic Shell Test Pressure: 24 ar ydraulic Seat Test Pressure: 17.6 ar 20 ar at: 10º to 120º Suitable Media: Water, Oil, Gas Rated at 20 ar working pressure cold water only o K J 50 191 80 42 53 58 8 65 203 91 45 53 73 14 80 211 95 45 53 83 19 100 230 50 53 102 26 150 255 138 56 53 152 48 200 271 170 60 80 202 175 165 200 160 71 250 326 198 68 80 252 175 165 200 160 92 300 366 240 80 80 302 175 165 200 160 111 350 413 267 80 80 336 175 165 200 160 128 Item Material S STM ody ast Iron 2 Gr220 126 l. isc Stainless Steel 1507 S31 16 351 8M Shaft Stainless Steel 970 416 S21 ISI 416 ushings PT Liner PM Orings PM Notes 1. onforms to S N 593, MSS SP67 2. olt circles are carefully designed to fit the following flange types: S N 1092 PN16, S 10 /, NSI 125 3. Top lange conforms to ISO 5211/1 4. Gearbox supplied as standard with gear operator, position indicator and tamper switch 2009 Rapidrop Limited L 90 126 154 210 265 320 370 430 Wt Kg. 8.3 8.3 9.1 10.2 13.9 24.7 33.4 42.3 50.6
ata Sheet 1.15 Issue RW300 Wafer utterfly Valve ugust 2009 M pproved / UL Listed escription Universal wafer type utterfly Valve suitable for connecting to NSI 16 lass 125, ISO 2084 / in 2501 PN16 & SN 1092 PN 16 langes. actory installed ouble Tamper Switch for indoor and outdoor use. Max Working Pressure: 20.7 ar Max Test Pressure: 41.4 ar Max Working Temperature: 120º 65 136 87 46 105 166 135 128 8.2 9.8 80 143 93 46 125 173 135 128 14.5 10.8 100 156 109 52 150 186 135 128 22.7 12.4 150 188 144 56 205 218 193 220 45.4 17.6 200 222 166 58 265 252 193 220 69.1 22.6 G Weight Kg Item Material ody STM 536 PM ncapsulated isc STM 536 Nylon oated Upper & Lower Stems ISI 420SS Worm Gear Shaft ISI 410SS ousing STM 536 and Wheel STM 536 lag Indicator STM 536 Shear Pin STM 510 Segment Gear STM 148 ousing Gasket PM Grade ORings (ll) PM Grade 2010 Rapidrop Limited LIST US
ata Sheet 1.16 Issue GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure: 30 ar ydraulic Seat Test Pressure: 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas Pipe O/ 65 73 140 85 96 53 61.5 7.2 65 76 140 85 96 53 61.5 7.2 80 89 97 96 53 75.0 7.8 100 114 175 118 53 97.0 9.8 150 165 210 155 53.0 15.7 150 168 210 155 53.0 15.7 200 219 257 180 134 80 198.0 175 165 200 160 32 24.1 250 273 314 230 160 80 248.0 175 165 200 160 44 37.0 300 324 339 260 166 80 298.0 175 165 200 160 66 43.3 Item Material S STM ody uctile Iron 2789 Gr 500/7 oated 536 705005 oated isc uctile Iron 2789 Gr 500 /7 PM ncapsulated 536 705005 PM ncapsulated Shaft Stainless Steel 970 416 S21 ISI 416 ushings PT Orings PM Notes 1. Grooved ends available for NSI/Metric and WW pipe. 2. Pressure and temperature ratings require the use of couplings with equivalent pressure ratings. 3. Top lange conforms to ISO 5211/1 4. Gearbox supplied as standard with gear operator, position indicator and tamper switch. 5. omplies with and meets with the requirements of N12845 6. The gearbox is located onto the valve flange plate via a locking pin. This ensures that the gearbox can only be mounted with the position indicator in line with the valve disc. 7. Supplied complete with 300 chain to secure handwheel to valve body. 2009 Rapidrop Limited o K J Wt. Kg.
ata Sheet 1.17 Issue GP 230 Wafer utterfly Valve Max Working Pressure: 16 ar ydraulic Shell Test Pressure: 24 ar ydraulic Seat Test Pressure: 17.6 ar 20 ar at: 10º to 120º Suitable Media: Water, Oil, Gas Rated at 20 ar working pressure cold water only o K J 50 191 80 42 53 58 8 65 203 91 45 53 73 14 80 211 95 45 53 83 19 100 230 50 53 102 26 150 255 138 56 53 152 48 200 271 170 60 80 202 175 165 200 160 71 250 326 198 68 80 252 175 165 200 160 92 300 366 240 80 80 302 175 165 200 160 111 350 413 267 80 80 336 175 165 200 160 128 Item Material S STM ody ast Iron 2 Gr220 126 l. isc Stainless Steel 1507 S31 16 351 8M Shaft Stainless Steel 970 416 S21 ISI 416 ushings PT Liner PM Orings PM Notes 1. onforms to S N 593, MSS SP67 2. olt circles are carefully designed to fit the following flange types: S N 1092 PN16, S 10 /, NSI 125 3. Top lange conforms to ISO 5211/1 4. Gearbox supplied as standard with gear operator, position indicator and tamper switch 5. The gearbox is located onto the valve flange plate via a locking pin. This ensures that the gearbox can only be mounted with the position indicator in line with the valve disc. 6. Supplied complete with 300 chain to secure handwheel to valve body. 2009 Rapidrop Limited L 90 126 154 210 265 320 370 430 Wt Kg. 8.3 8.3 9.1 10.2 13.9 24.7 33.4 42.3 50.6
ata Sheet 1.27 Issue Grooved nd utterfly Valve Model 204 PN20/300PSI * 100 (flag height) supplied as standard. 35 available on request Working Pressure and Temperature Working pressure PN20/300PSI. Temperature from 10º to 100º for PM coated disc. Top lange: omplies with ISO5211/1. ndtond according to MSS SP672002 Grooved Type Grooved dimensions comply with Metric or NSI Pipe Standards Operator Gear operator. With two internal approved switches. O G K M 50 258.8 70.0 82.4 60.3 158 54.0 165.0 65.0 26.2 65 264.8 75.0 96.8 73.0/76.1 158 54.0 165.0 65.0 32.4 80 271.3 82.0 96.8 88.9 158 54.0 165.0 65.0 32.4 100 293.8 100.0.85 114.3 158 54.0 165.0 65.0 39.0 125 307.5 119.0 147.6 139.7/141.3 158 54.0 165.0 65.0 51.8 150 334.8 130.0 147.6 165.1/168.3 158 54.0 165.0 65.0 50.3 200 362.8 162.0 133.4 219.1 158 54.0 165.0 65.0 40.2 250 407.5 200.0 158.8 273.0 230 75.0 172.0 75.0 49.4 300 446.7 224.0 163.6 323.9 238 62.0 193.0 77.0 49.8 N O 150 150 150 150 150 150 1.35 200 33.6 285 46.2 285 68.7 Weight Kgs 7.6 7.7 8.1 10.3 12.6 15.4 19.4 31.8 42.0 Part Name Material N Spec. STM Spec. ody uctile Iron N JS 1050 536 654512 Shaft Stainless Steel S970 420S37 ISI 416 isc I P M oated N JS 1050 536 654512 ushing PT oercial oercial ORing PM oercial oercial 2010 Rapidrop Limited
ata Sheet 1.28 Issue G 100 100* Wafer utterfly Valve Model 203 PN20/300PSI K N O * 100 (flag height) supplied as standard. 35 available on request Valve Standards: omplies with N593/S5155/MSS SP67. Working Pressure and Temperature Working pressure PN20/300PSI. Temperature from 10º to 100º for PM Seat. Top lange: omplies with ISO5211/1. ndtond: according to MSS SP672002. lange Type: SN 10922 PN16, NSI 16.1 lass 125. Operator Gear operator. With two internal approved switches. O G K 50 278.0 80.0 43.0 103.0 158 54.0 165.0 65.0 65 292.0 89.0 46.0 120.0 158 54.0 165.0 65.0 80 298.0 95.0 46.0 128.0 158 54.0 165.0 65.0 100 317.0 114.0 52.0 165.0 158 54.0 165.0 65.0 125 330.0 127.0 56.0 191.0 158 54.0 165.0 65.0 150 343.0.0 56.0 216.0 158 54.0 165.0 65.0 200 377.0 175.0 60.0 268.0 158 54.0 165.0 65.0 250 472.0 223.0 68.0 325.0 230 75.0 172.0 75.0 300 518.0 245.0 78.0 399.0 238 78.5 193.0 77.0 N O 150 3.4 150 7.8 150 15.0 150 24.5 150 32.4 150 48.4 200 69.4 285 89.5 285.4 Weight Kgs 7.8 8.6 8.9 10.2 12.3 13.3 17.7 29.8 40.8 Part Name Material N Spec. STM Spec. ody uctile Iron N JS 1050 536 654512 Shaft Stainless Steel S970 420S37 ISI 416 isc I + NI N JS 10 50 STM 536 654512 Seat PM Insert N JS 1050 536 654512 ushing PT oercial oercial ORing PM oercial oercial 2010 Rapidrop Limited
utterfly Valves esign & Installation The Rapidrop butterfly valve should be connected to the piping system with appropriate couplings or flanges. low may be from either direction, and the valve may be positioned in any direction. Rapidrop butterfly valves have been designed with a slow close hand wheel operator, which effectively minimizes water haer. These valves feature minimum flow restriction and pressure loss when in the fully open position. Installation When the valves are received from the manufacturer they should be handled carefully to avoid breakage and damage to the seating area. efore installation of the valve, clean piping, flange and coupling. When the valves close hard, it is usually due to debris lodged in the seating area. Often this may be corrected by backing off the hand wheel and closing again. The valve should never be forced to seat by applying a wrench to the hand wheel as this may distort the valve components or score the sealing surface. are must be taken to align wafer valves correctly so that the disc operation to the fully open position will not be obstructed. The use of excessive force to open or close the valve violates all warranties whether express or implied. The inlet and outlet pipe adjacent to the valve should be properly supported to prevent excessive stress on the valve body. The valve should not be used to force a pipeline into position as this may result in the distortion of the valve body. are and Maintenance Rapidrop butterfly valves require no regular maintenance, however, it is advisable to inspect and verify proper operation of the unit annually or in accordance with the authority having jurisdiction. The inspection should include a visual check for leakage at the pipe connection and body to operator connection. Inspection and maintenance should be performed by a qualified inspection service. Switch Installation Rapidrop butterfly valves are provided with internal supervisor position switches. The tamper switch operates by a cam connected to the valve stem. The switch will change position and close within two (2) full turns of the hand wheel from the fully open position. Switch #1 or connection to the supervisory circuit Normally Open: 1 Yellow Normally losed: 1 Red oon: 1 White Ground Lead: 1 Green Switch Wire Option S1 oon (White) ctuator ase Ground S2 oon (lack) Switch #2 uxiliary switch connected per authority Normally Open: 1 lue Normally losed: 1 Orange oon: 1 lack Ground Lead: 1 Green Valve Open (Yellow) Valve Not Open (Red) (Green) Valve Open (lue) Valve Not Open (Orange) 2009 Rapidrop Limited