November 6 Edition Laboratory & Industrial Fume Extraction Corrosion Resistant Polypropylene Fan Catalogue www.axairfans.co.uk
...bout xair Fans UK pplication Knowledge : 20 years experience in general air movement; including corrosive, explosive and hot fume handling. Plastic range : 9 basic sizes of polypropylene fan in plain scroll housing from stock, plus 3 sizes of inline fan on short leadtime. Stock facility: Large modern warehouse facility containing a vast selection of fans, fan components and general accessories. Customised build: Fans assembled from standard components to create the perfect mechanical and electrical solution to safe fume extraction. Customer care : Experience a sense of partnership with xair Fans. xair offers you a wide range of electrical options including : V or 11V single phase motor /V three phase directonline or inverter supplied motor /6V three phase stardelta connection in larger motor sizes. Prewired electrical isolators Motor starters Inverter drives Fume cupboard air alarms TEX motor xair offers you a wide range of mechanical options including : Choice of handing Choice of standard or weather pedestals ntivibration mountings Flexible connectors Flange pairs Duct transformations Manual dampers Drain hose connectors TEX polypropylene/carbon fans Lowfield Drive Centre 00 Wolstanton NewcastleunderLyme ST 0UU Tel : 01782 349430 Fax : 01782 349439 Email : sales@axairfans.co.uk www.axairfans.co.uk ll specifications, data and drawings are subject to alterations without prior notice 2 xair Fans UK Ltd 01782 349 430
Motors & ccessories Motors ll polypropylene fans are directly driven by IEC dimensioned electric motors manufactured to BS4999EN034 Standards and are selected on their capacity for: Low electromagnetic vibration Dimensional compactness Inverter drive compatibility Electrical terminal accessibility IP dust and hosed water protection Integrity of surface finish ccessories XIR polypropylene fans are the best starting point for a fully functional and reliable installation, but are just the first consideration. It is the total system that provides ultimate customer satisfaction and a desire to repeat the experience. With that in mind we offer: Mechanical isolation of the fan from the ductwork by means of chemical resistant and truly flexible duct connectors, attached by quickrelease stainless steel band clips. Mechanical isolation of the fan from the motor pedestal or base by means of rubber antivibration mountings of the correct hardness and compression. Flange pairs with sockets to fit standard plastic ductwork. These can provide an easy method of disconnecting the fan stack in situations where a flexible connector is impractical. Prewiring of electrical isolators to the motor terminals to ensure first class electrical work in factory conditions and an isolator on the fan pedestal. Fume cupboard low air alarms and air speed controls that are modern sophisticated products requiring no special training to install and commission. sales@axairfans.co.uk 3
Product Coding System S 2 R / /4 EX /1 /STD Index SET S Fan Model abbreviation S: ST: J: SET fume cupboard and general duty polypropylene fan STORM filter duty and general low flow / higher pressure fan JET induct and roof mounted inline fan Model number S & J range impeller diameter (cm) ST model number Scroll housing handling R: L: Right handed or clockwise rotation on the fan inlet (Eurovent LG) Left handed or anticlockwise rotation on the fan inlet (Eurovent RD) Inlet & discharge diameter 12 1 20 31 ST10 ST12 ST14 & S1 ST16, S20 & J20 S2 & J2 S30 & J30 S3 Motor & impeller rotational speed 2 4 6 2 pole or /min 4 pole or /min 6 pole or 930/min Electrical data, sound levels & dimensions Page S Fan on weather padestal Dimensions Page 8 STORM ST Fan Electrical data, sound levels & dimensions Page 9 ST Fan on weather pedestal Dimensions Page 12 TEX Flameproof EX Where stated ccessories Electrical supply 1 3 Single phase electrical supply Three phase electrical supply Pedestal STD BOX Standard steel pedestal for indoor and sheltered installations Weather protecting polypropylene box pedestal 4 xair Fans UK Ltd 01782 349 430 Page 13 TEX Category 3 Consult xair
SET S Fans SET S range fans are designed to provide high air flow rate against medium system pressures; typical applications being the extract of corrosive fumes from laboratory fume cupboards and industrial process tanks. Electrical Data THREE PHSE SINGLE PHSE Model /min kw Motor V (full load) 2,8 2,0 3,8,1 7,0 2,0 1,9 10,8 14,6 (start) 7 9 14 19 28 63 S1/2 S1/4 S20/2L S20/2M S20/2H S20/4 S20/6 S2/2L S2/2M S2/2H S2/4 S2/6 S30/4 S30/4L S30/6 S3/4 S3/4H S3/6 930 930 930 930 0,37 0,2 0, 0, 1,10 0,2 0,18 1,0 2,20 3,00 0,37 0,18 1,0 0, 0,,0 7,0 2,20 2 4 2 802 802 4 6 S2 L2 L2 4 6 L4 804 S6 112M4 132M4 112M4 3,4 1,9 10, 4,9 4,8 8 28 27 16 V (full load) 1,2 1,0 1, 1,8 2, 1,0 0,9 3,7,1 6,9 1,2 0,9 3,7 2,2 2,2 11,4 14,7,3Y (start) 6 7 10 14 2, 20 34 49 2, 20 10 8,0 * *96 24Y Notes: Tabulated current values are approximate and depend on make and model of motor. Size the wiring with a builtin safety factor. Set current overload protection to (Full Load) (Full Load) = Motor full load current to select wiring and current overload protection. (Start) = Motor starting current mainly advisory for motors with Y/ facility. To obtain V 3phase current multiply V (Full Load) by 1,732. * connected V directonline. Y/ switching reduces starting current to 1/3 x (Start). Sound Level Model S1 S20 S2 S30 S3 /min 63 12 20 00 1000 0 0 8000 Hz 9 9 930 930.kW 7.kW 8 3 6 9 69 87 63 79 84 39 6 34 46 62 42 2 70 48 80 2 69 47 9 6 83 61 73 8 77 67 83 63 73 91 69 83 87 92 64 9 87 67 77 9 73 8 86 9 64 9 87 68 78 96 74 86 8 89 94 77 67 83 64 74 92 70 82 8 89 94 6 73 1 63 79 70 88 66 78 83 87 92 48 6 43 1 61 79 7 69 74 78 83 sales@axairfans.co.uk
Performance Characteristics (0Hz) S1 / 12 S20 / 1 S2 / S30 / 20 S3 / 31 SET S range curves are in Total Pressure, as appropriate for ducted systems. The Pv characteristic is the Fan Velocity Pressure. The performance available from the fan is affected by the speed at which air leaves the ventilation system and the KW rating of the motor. For performances beyond the PV curve, please consult xair. 6 xair Fans UK Ltd 01782 349 430
Dimensional Data MODEL B C ØD E F G H L M P Y Y1 Z X X1 S1/12/2&4 170 240 203 12 100 32 11 30 70 80 3 180 1 340 240 S20/1/2L,4&6 208 303 240 1 100 7 143 32 84 94 3 180 1 340 240 S20/1/2M&H 208 303 240 1 100 7 143 32 84 94 3 180 1 340 240 80 S2//4&6 248 36 310 103 92 164 3 9 10 41 180 1 420 300 S2//2L,M&H 248 36 310 103 92 164 3 9 10 1 240 220 4 370 S30/20/4&6 300 40 373 20 117 112 198 3 110 120 40 240 220 4 370 S30/20/4L 300 40 373 20 117 112 198 3 110 120 40 240 220 4 370 80 S3/31/4 370 70 40 31 130 170 2 10 170 724 30 314 0 468 112 S3/31/4H 370 70 40 31 130 170 2 10 170 822 30 314 0 468 132 S3/31/6 370 70 40 31 130 170 2 10 170 724 30 314 0 468 112 Handings 8 discharge angles available for each direction of rotation RD or LG. pplicable for all types except S3, (available in LG handings only) sales@axairfans.co.uk 7
S Fan on a Box Pedestal S range polypropylene fan on a weatherprotecting box pedestal (the drawing shows handing LG other handings available). Dimensions of scroll housing MODEL B C ØD E F G H L Q S1 170 240 203 12 100 32 11 30 70 S20 208 303 240 1 100 7 143 32 84 104 S2 248 36 310 103 92 16 3 9 11 S30 300 448 373 20 117 112 198 3 110 130 S3 370 70 40 31 130 170 2 10 180 Motor R U1 U2 V V1 W W1 S1 all sizes 40 31 320 20 S20 0.2kW 0.kW 480 31 320 20 S20 0.kW 1.1kW 80 480 8 36 330 S2 0.37kW 0 76 374 330 S2 1.kW 2.2kW 3kW 610 9 4 36 300 330 S30 all sizes 640 9 4 36 300 330 S3.kW 112 880 122 78 00 8 480 S3 7.kW 132 880 142 8 00 8 480 Dimensions of pedestal MODEL 8 xair Fans UK Ltd 01782 349 430
STORM ST Fans STORM ST range fans are designed to provide relatively low air flow rate against elevated system pressures; typical applications being air filtration, local extraction arms, fume scrubbers and chemical stores. Electrical Data THREE PHSE SINGLE PHSE Model /min kw Motor V (full load) (start) V (full load) (start) ST 10/2 0,12 62 1,4 2 0, 6 ST 10/4 0,09 64 1,0 1, 0,4 1 ST 10/2/1E 0,07 ERM 0,11 ST 12/2 0,37 2 2,8 7 1,2 6 ST 12/2 0,2 4 2,0 1,0 ST 14/2 1,10 802 7,0 19 2, 14 ST 16/2 2,20 L2 14,6 63 34 ERM : external rotor motor Notes: Tabulated current values are approximate and depend on make and model of motor. Size the wiring with a builtin safety factor. Set current overload protection to (Full Load) (Full Load) = Motor full load current to select wiring and current overload protection. (Start) = Motor starting current To obtain V 3phase current multiply V (Full load) by 1,732. Sound Level Sound power (Lw) in at specified frequency (Hz) Sound pressure at 3m range in /min 63 12 20 00 1000 0 0 8000 Hz ST12 6 69 77 77 73 6 ST14 79 73 8 8 77 69 ST16 84 6 78 86 86 82 74 (ST10 figures not available) sales@axairfans.co.uk 9
Performance Characteristics (0Hz) ST10 / ST12 / ST14 / 12 ST16 / 1 STORM ST range curves are in Static Pressure, as appropriate for applications requiring elevated pressures. The PV characteristic is the Fan Velocity Pressure 10 xair Fans UK Ltd 01782 349 430
Dimensional Data MODEL B C ØD E G H L M N P Y Y1 Z X ST10//2&4 11 13 127 18 97 32 48 7 140 ST10//4/1E 11 13 127 18 97 32 48 7 20 ST10//4/1E/BKT(*) 11 13 127 18 97 32 48 7 20 ST12//4/2&4 14 1 163 212 130 4 80 72 10 30 180 1 340 240 ST14/12/2 188 232 227 12 218 170 110 83 10 433 180 1 340 240 80 ST16/1/2 23 288 278 1 262 20 40 100 97 10 477 240 1 420 370 130 100 16 13 X1 6 (*) BKT : Rightangled bracket supporting the inlet side of fan housing Handing 8 discharge angles available. sales@axairfans.co.uk 11
ST Fan on a Box Pedestal ST range polypropylene fan on a weatherprotecting box pedestal (the drawing shows handing LG other handings available). Dimensions of scroll housing MODEL B C ØD E G H L Q ST12 14 1 203 212 130 4 80 82 ST14 188 232 227 12 218 170 110 93 ST16 23 288 278 1 262 20 40 100 107 Dimensions of pedestal MODEL Motor P U1 U2 V V1 W W1 ST12 0,37kW 422 31 320 20 ST14 1,1kW 463 8 36 330 ST16 2,2kW 72 9 4 36 300 330 12 xair Fans UK Ltd 01782 349 430
ccessories Flexible Connector & Quick Release Clips Socket Flanges Duct daptor Prewired Isolator Three phase Manual Damper Metal Pedestal Drain Hose Connector Plastic Cable Gland V Mountings Manual Damper Weather Protecting Pedestal Duct daptor Flexible Connector & Quick Release Clips Prewired Isolator Single Phase rmoured Cable Gland Plastic Cable Gland Drain Hose Connector djustable Height V Mountings sales@axairfans.co.uk 13
S1 S20 S2 S30 S3 Ø12 Ø1 Ø Ø20 Ø31 V Mounting (Ø20x1 rubber bobbin) VBM6 VBM6 VBM6 V Mounting (Ø2x22 rubber bobbin) VBM8 (S2/2) VBM8 V Mounting(2) (2 high rubber turret) VTM8 FLX12 FLX1 FLX FLX20 FLX31 FLG1 FLG FLG20 FLG31 (Ø12/1) DD1216 (Ø12/) DD1220 (Ø1/) DD1620 (Ø/20) DD202 (Ø/31) DD2031 (Ø20/31) DD231 (Ø31/3) DD313 DM12 DM1 DM DM20 DM31 Prewired isolator Single phase IPW1 IPW1 IPW1 IPW1 IPW1 Prewired isolator Three phase IPW3 IPW3 IPW3 IPW3 Drain hose connector (Ø12PP) HOC32 HOC32 HOC32 HOC32 HOC32 Fume cupboard alarm LBIR(3) LBIRC(4) LBIR(3) LBIRC(4) LBIR(3) LBIRC(4) LBIR(3) LBIRC(4) LBIR(3) LBIRC(4) ccessories Flexible connector & stainless clips S Fans Socket PVC flange PVC adaptor Manual damper ST10 ST12 ST14 ST16 Ø Ø Ø12 Ø1 V Mounting (Ø20x1 rubber bobbin) VBM6 VBM6 V Mounting (Ø2x22 rubber bobbin) VBM8 V Mounting(2) 2 high rubber turret Flexible connector & stainless clips FLX12 FLX1 Socket PVC flange 401 PVC adaptor Manual damper DM12 DM1 Prewired isolator Single phase IPW1 IPW1 IPW1 Prewired isolator Three phase IPW3 IPW3 IPW3 Drain hose connector HOC32 HOC32 HOC32 Fume cupboard alarm LBIR(3) LBIRC(4) LBIR(3) LBIRC(4) LBIR(3) LBIRC(4) ST Fans ccessories (2) LBIR(3) LBIR(4) (Ø12/1) DD1216 (Ø1/20) DD1620 (Ø12/) DD1220 Consult xair Fans for details & availability lso available for all weather boxes Fume cupboard air alarm & monitor Fume cupboard air alarm, monitor & air speed controller (when used in conjunction with an inverter or motorised damper) 14 xair Fans UK Ltd 01782 349 430
Labair ir Speed larms & Controllers for Laboratory Fume Cupboards Standard Features Display: 2 green LED normal air speed 1 green LED high air speed 1 red LED flashing low air 1 orange LED flashing sash high 1 orange LED calibration Test: Fan, Mute & Light LED test facility larms: udible buzzer for low air speed alarm udible buzzer for sash high alarm Settings: larm delay for 0s, 10s or 30s System purge for 0s or 30s Buttons: Start/stop, with orange LED, for fume fan & air makeup fan Mute to cancel audible alarms Light cupboard, with orange LED Mounting: Flush or Surface Box with IP seal 210 x fascia x 10 deep Vertical and horizontal options Supply: Sensor: Vac/12Vdc power supply included Ø22 tube. 3,m shielded Options Relay to switch for an external alarm device Battery backup for red LED. Rechargeable and lasting up to 12 hours Fascia colour white, dark grey, or silver plastic Logo plate printed to customer requirements (100pieces minimum) 3 digit air speed display in m/s UK 3 pin plug on V power supply lead Models LBIR is a basic air speed monitor and alarm LBIRC has PID outputs to an inverter speed controller or to air damper drive electronics The purpose of LBIRC is to maintain a fixed air speed at the fume cupboard sash face regardless of sash height, to save heat extraction from the laboratory, and to prevent draughts within the fume cupboard Both models are available with LED Display only, or with Digital Display of air speed in m/s cable. Included: Calibrated 0,m/s. Recalibration facility. Compliant with EU laboratory standard EN141 Electromagnetic standard EN 61326, RoHS Directive, CE 12 sales@axairfans.co.uk 1
www.axairfans.co.uk Lowfield Drive Centre 00 Wolstanton NewcastleunderLyme ST 0UU Tel : 01782 349430 Fax : 01782 349439 Email : sales@axairfans.co.uk