Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the PCB surface the receptacle height is.0 mm.(fig.1). Strong Construction Use of metal shell guarantees that fully mated connectors will withstand 30 N max. force applied on the plug in any direction.(fig.) 3. High contact reliability Bellows contact with long mating stroke provides highly reliable mating as well as soft insertion feeling. Mating durability is up to,000 times long.. Sequenced contact mating The protection of the circuit is assured by having the contact at each end of the receptacle are longer by 0. mm, with electrical wipe of 1. mm. Location of the circuit protection contacts can be changed as required. Remaining contacts electrical wipe is 0.9 mm.. Incorrect Insertion Prevention Connectors will not be damaged when angled or reverse plug insertion is attempted.(fig.3) 6. Safety plug release Plug will release when an excessive pull force is applied to the cable. 7. RoHS Compliant All materials and substances used to produce this product comply with RoHS standards. Overview LX Series is a super low profile interface connector with sequential mating design and friction lock, which has been developed for low profile mobile terminals. This connenctor features ESD problem prevention in 0. mm terminal pitch and.0 mm small and low profile design, which makes it suitable to small mobile devices. Lower Profile.9 Existing 300 Series Strong Construction Incorrect insertion prevention LX Series 30N 30N Fig.1 Fig. Applications DSC, PDA, thin electronic equipment, mobile phones and other portable devices requiring high durability interface connectors. Angled insertion Reversed insertion Fig.3 0e 1
LX Series Ultra Low-profile Interface Connectors with.0 mm Mounting Height Product specifications 0.A Current rating Ratings (1A max. can be carried via random contacts) Voltage rating 0V AC Operating temperature range : 0ç to +70ç Storage temperature range : ç to +8ç Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Characteristic Specification Conditions 1.Contact resistance.insulation resistance 3.Withstanding voltage.mating/un-mating forces. Durability (mating/n-mating) 70mø max. 1000 Mø min. (dry) 10 Mø min. (high humidity) No flashover or insulation breakdown. Mating: 10N max., un-mating: N min. Amount of change of contact resistance: 0mø max. 100mA DC 100V DC 0V AC / one minute With corresponding connector.,000 times 6. Shock 7. Vibration 8. Temperature cycle Contact resistance: 0mø max. Temperature: ç +ç to +3ç +8ç +ç to +3ç Insulation resistance: 10Mø min. Time : 30 to 3 30 to 3 min No electrical discontinuity of 1µ sec. Max. Contact resistance: 0mø max. Acceleration of 90 m/s, 11 ms duration, Frequency: 10 to Hz, single amplitude of 0.7 mm, Contact resistance: 0mø max. Insulation resistance: 10Mø min. sine half-wave waveform, 3 cycles, 3 axis. acceleration of 98 m/s, hours, 3 axis. 9. Salt spray No heavy corrosions % water solution at 3 C for 8 hours Materials / Finish Receptacles Plugs Component Material Finish/Color Remarks UL9V-0 Insulator Contacts Shell Insulator Contacts Metal shield Covers Strain relief clamp Self tapping screws Synthetic resin Copper alloy Stainless steel Synthetic resin Copper alloy Stainless steel Synthetic resin Copper alloy Steel Black Contact area: Gold plated Mounting area: Gold flash plated Soldering area: Gold flash plated Black Contact area: Gold plated Termination area: Gold flash plated Black Trivalent black chromate Component Material Finish/Color Remarks UL9V-0 UL9V-0 Screw size: M Ordering information Receptacles Plugs Bushing LX 60-16 S 1 3 LX 0-16 P 1 3 LX 0-16 BS(.) 1 3 1 3 Series number : LX Termination type 0 : Solder type 60 : Right angle SMT Number of contacts : 1, 16, 0 Contact type P : Male contact (Plug) S : Female contact (Receptacle) Bushing BS(.0) : Dia..0mm cable BS(.) : Dia..mm cable BS(.0) : Dia..0mm cable
LX Series Ultra Low-profile Interface Connectors with.0 mm Mounting Height Receptacles 1 pos. P=0. (.). R0. 10.6 0.8 3.6 Ø1 Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Part No. HRS No. Packaging RoHS LX60-1S LX60-16S LX60-0S -0018-3 -0001-0 -0016-8,000 pcs/reel 16 pos. (7.). P=0. 6 1.6 0.8 Ø1 3.6 BRecommended PCB mounting pattern R0. BRecommended PCB mounting pattern -Ø1.1 Hole 3.8.8 1. PCB edge 0 pos. P=0. No.0 (.) P=0. 0.3 7.8 No conductive traces in this area (9.) 6.7 1.6. 0.8 1. 0.3.7 Land area Ø1 R0. BRecommended PCB mounting pattern 3.6 -Ø1.1 Hole (7.) P=0. 0.3 1. -Ø1.1 Hole (9.) P=0. 0.3 1. 3.8.8 1. PCB edge 8. 9.8 0.3.7 3.8.8 1. PCB edge 7 10. 11.8 0.3.7 No conductive traces in this area Land area No conductive traces in this area Land area 3
LX Series Ultra Low-profile Interface Connectors with.0 mm Mounting Height Plugs 1 pos. Ø.9 (R3.) 1.8 8 Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Part No. HRS No. Packaging RoHS LX0-1P LX0-16P LX0-0P -0019-6 -000-3 -0017-0 1 16 pos. (R3.8) (R1.) Ø6. 16.8 8 6. 1. 6 Bushing.1 (R1.) 6. 1. 0 pos. (R3.8) (R1.) Ø6.9 18.8 6. 1. No.0.1. 8. Part No. HRS No. Packaging RoHS LX0-1BS(.0) LX0-16BS(.) LX0-0BS(.0) -000- -001-8 -00-0 100 pcs/pack
LX Series Ultra Low-profile Interface Connectors with.0 mm Mounting Height Receptacle Packaging Specifications Embossed carrier tape dimensions Reel dimensions Unreeling directions Ø1. C B 1.7 A D (Inside dimension) Ø80 Ø380 Unreeling directions 30 Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Part No. A B C LX60-1S LX60-16S LX60-0S 11. 1 E (Outside dimension) Part No. D E LX60-1S LX60-16S LX60-0S. 9. Receptacles Recommended Temperature Profile Applicable Plug Cable Part No. LX0-1P LX0-16P LX0-0P Cable diameter Ø max. Ø. max. Ø max. Ø13 This measurement is performed on the contact lead section. The temperature profile may vary due to external conditions such as the type of cream solder, manufacturer, and board size. Please contact the solder manufacturer for their specifications. Wire size Ø0.6 mm max. (AWG#30 to 3 or equivalent) Note 1: Applicable cable sizes are guidelines. (There may be slight differences depending on the cable outer insulation) Note : Cables must be attached using single piece overmolded bushings on the cable. Note 3: Please refer to applicable Cable Termination Procedures Manual for correct plug assembly and cable termination. Note : Contact HRS for cable assemblies. BMated Condition Dimensions Receptacle Plug 1. 0.
Powered by TCPDF (www.tcpdf.org) LX Series Ultra Low-profile Interface Connectors with.0 mm Mounting Height USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 688 Westhills Court, Simi Valley, CA 9306-63 Phone : +1-80--798 Fax : +1-80--317 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. San Jose Office 3 Scott Boulevard, Building 7, Suite 101 Santa Clara, CA 90 Phone : +1-08-3-960 Fax : +1-08-3-961 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 37677 Professional Center Drive, Suite #100C Livonia, MI 81 Phone : +1-73--9963 Fax : +1-73--996 http://www.hiroseusa.com Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-0-6760 Fax : +31-0-6769 http://www.hiroseeurope.com UNITED KINGDOM: Hirose Electric Europe BV (UK Branch) Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK 8NH Phone : +-1908 000 Fax : +-1908 008 CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 00 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 18008 Phone : +86-7-807-081 Fax : +86-7-807-0873 http://www.hirose-china.com.cn KOREA: HIROSE KOREA CO., LTD. 161-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do 9-0 Phone : +8-31-96-7000,71 Fax : +8-31-96-7100 http://www.hirose.co.kr INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office Unit No.03, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 60066 Karnataka, India Phone : +91-80-10 1907 Fax : +91-80-10 9908 http://www.hirose-singapore.com.sg GERMANY: HIROSE ELECTRIC EUROPE B.V. German Branch Herzog-Carl-Strasse D-73760 Ostfildern (Scharnhauser Park) Phone : +9-711-60-0-1 Fax : +9-711-60-0-99 http://www.hirose.de CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 00001 Phone : +86-1-6391-33 Fax : +86-1-6391-333 http://www.hirose-china.com.cn HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +8-803-338 Fax : +8-91-660 http://www.hirose-hongkong.com.hk SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #6-1, International Plaza 079903, Singapore Phone : +6-63-6113 Fax : +6-63-613 http://www.hirose-singapore.com.sg MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office) 1-10-07, Suntech @ Penang Cybercity (116),Lintang Mayang Pasir 3,1190, Bayan Baru, Penang, Malaysia. Phone : +60-619-6 Fax : +60-619-7 http://www.hirose.com/sg/ GERMANY: HIROSE ELECTRIC EUROPE B.V. Nuernberg Office Muggenhofer Str. 136 909 Nuernberg Phone : +9-911 3 68 89 63 Fax : +9-911 3 68 89 69 http://www.hirose.de CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 6# East th Ring Middle Road, ChaoYang District, Beijing, 1000 Phone : +86-10-16-933 Fax : +86-10-908-1381 http://www.hirose-china.com.cn TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886---7377 Fax : +886---730 http://www.hirose-taiwan.com.tw INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office Office NO.19, Regus-Green Boulevard, Level, Tower C, Sec6, Plot B-9A, Block B, Noida, 01301, Uttar Pradesh, India Phone : +91-1-660-8018 Fax : +91-10-8099 http://www.hirose.com/sg/ -6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi -80,JAPAN TEL: +81--60-36 Fax: +81--91-376 http://www.hirose.com http://www.hirose-connectors.com 6 The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 09/01. Contents are subject to change without notice for the purpose of improvements.