The engineering resut of carefu market research: Sma, ight, powerfu and universay appicabe Te: 0 85 3 / 39-0 Fax: 3 94 8 http://www.hatz-diese.de emai: marketing@hatz-diese.de.4-7.7 kw.8-0.5 HP 5 / 629 E Printed in Germany Modifications, which serve the technica improvements, are reserved. Design Air-cooed singe-cyinder 4-stroke Diese engine. Vertica cyinder. Light aoy diecast cyinder crankcase. Light aoy cyinder head. Forged crankshaft Light aoy piston for ow free forces of gravity. Labrication by pressurised circuation of oi, fine screen fitering in main fow. Vave contro by rocker, push-rods and tappets. Characteristics Engine Type Dimensions (mm) Länge Breite Höhe 268 360 400 295 370 430 Direct injection. Compression :22. Good cod start performance. Fue orientated mixture preparation. Resut: exceent exhaust quaity. Speed reguation by spring-oaded governor. Proportionaity < 5% at / r.p.m. The contro cover houses the governor, the entire vave drive, the injector pump drive and the automatic decompression system and oi pump. Oi drain on both (narrow) sides of the engine. This gives free access of at east one drain position for amost a instaations. Dry air fiter with paper cartridge and integrated pre-ceaner. Cooing fan and AC generator incorporated in the fywhee (not sensitive to dust). 4 seperate engine feet permit mounting on uneven foundations. Differences of eve of up to mm can be corrected. Exhaust outet fexibe as regards both position and direction of exit. 35 394 480
Technica data Number of cyinders Bore x Stroke Dispacement Mean piston speed at r.p.m. Compression ratio Lub. oi consumption Lub. oi capacity max. / min. Speed contro mm inches cu.in. m/s ft/min US qts Ide speed Static speed droop 69 x 62 2.72 x 2.44 80 x 69 5 x 2.72 88 x 76 6 x 2.99 0.232 4.5 6.2 22 0.347 2.6 6.9 358 0.462 28.9 7.6 496 22 22 22 approx. 0.5 % of fue consumtion, reated to fue oad 0.9 / 0.4 0.95 / 0.42. / 0.6.6 / 0.63.55 / 0.77.64 / 0.8 approx. 800 r.p.m. approx. 5 % at r.p.m. HP.0 0.0 9.0 8.0 7.0 6.0 5.0 kw 8.0 7.0 6.0 5.0 4.0 4.0 3.0 3.0 2.0 Vehice output acc. to DIN 70020 Torque for vehice output bs. ft Nm kpm 26.0 2.6 8.0 6.0 4.0 2.0 0.0 24.0 22.0 20.0 8.0 6.0 4.0.2 8.0.0. 7.0.0 9.0 500 2000 2500 n(r.p.m.) 500 2000 2500 n(r.p.m.) 2.4 2.2.8.6 bs.hph g/kwh 0.50 30 0.45 0.40 290 270 250 230 Specific fue consumption for vehice output g/hph 220 200 80 500 2000 2500 n(r.p.m.) Performance data refer to Standard Reference Conditions of DIN ISO 3046: +25 C (77 F), 00 m ALT, reative humidity 30 % During running-inperiod the output increases by approx. 5 % which is taken into consideration at deivery. Power reduction acc. to DIN ISO 3046. Standard vaues: Above 00 m ALT approx. % per 00 m. Above 25 C (77 F) approx. 4 % per 0 C (50 F). Performance tabe Hatz-Stand. r.p.m. kw HP kw HP kw HP 4.6 5.0 6.8 7.3 9.9 4.6 6.3 6.8 9.3 ISO net brake fue stop power (IFN) for intermittent oad acc. to DIN ISO 3046 B 2300 2000 2.6 2. 3.7 3.9 5.7 5.3 4.6 6.3 5.7 4.9 8.6 7.8 6.7 800.9 2.5 3.0 4. 4.4 6.0 500.5 2.0 2.3 3.6 4.9 ISO-standard power (ICXN) (0% overoad permissibe) and ISO-standard fue stop power (no overoad permissibe) acc. to DIN ISO 3046. For constant speed and constant oad. (ICFN) S 2300 2000 800 500 2.5 2.2.9.7.4 3.8 2.6 2.3.8 4.5 4. 3.8 3.5 2.7 2. 6. 5.6 5.2 4.7 3.7 6.6 6.2 5.8 5.2 4.5 4.0 3.2 9.0 8.4 7.9 7. 6. 5.4 4.4
Instaation data Combustion air required ) at r.p.m. approx. Cooing air required ) at r.p.m. approx. Permanent titing Starter Current aternator charging at / 500 r.p.m. Battery capacity min / max Ah 3 m / min 0.35 cu.ft./min 3 m / min cu.ft./min max. degrees ) For other r.p.m. there is a inear reduction of the air requirement 2) Fywhee ow 3) A other positions 3 4.0 40 0.52 0.69 9 25 4.5 8.7 60 309 2) 3) 25, 35 2 V - 0.8 kw 4 V - ca.4 A / 7 A 36 / 60 Ah Permissibe oad on power-take-off points / max. permissibe radia force max. permissibe radia force 60 000 62 600 F = (N) F = (N) L (mm) 70 L (mm) 84 F2 F max. permissibe axia force F2 = 800 (N) max. permissibe axia force F2 = 200 (N) L Maintenance- and operating points To achieve the engines maximum ife, it is essentia that the engine gets serviced meticuousy at reguar intervas. During your first instaation pease make sure that easy accessibiity of service and operating points is assured. The easier the accessibiity is, the sooner and more conscientous the engine wi be maintened. Pease convince yoursef personay that a serve and operation points are easiy accessibe before deivering your machine to the customer. Fue fiter Strap for transportation Injection vave Vave cover Air fiter Injection pump Oi dipstick and Oi fiing Speed contro ever Oi fiter Oi drain pug Eectrica equipment Starter-switchboard-instruments inc. LED-dispay are mounted to the engine or wi be deivered upon request as swithboard-instruments with cabe (2m) oose. The engine is started and controed from this instrument box. Instrument box and cabe harness are part of the additiona equipment and suppied according to the number of eectrica safety features which are required. If the engine has to be started at temperatures beow - 5 C, engine must be fitted with a pre-heating system (gow pug) (additiona equipment). Further additiona equipments incude automatic start and stop, remote contro etc. Pease ask for drawings and wirings diagrams.
Power-Take-Off and Sense of Rotation Power-take-off shaft, governor side, with max. engine speed, Sense of rotation anti-cockwise (fig. ). Different stub-shafts (page 6). at mounting shafts Jmax = 0.04 kgm 2 Radia oading capacity, see page 7. Hydrauic pump mounting as very short-mounted add.equipment. Engine Designations Execution. / 30. Execution T. Execution U. : up to r.p.m. : up to r.p.m. : up to r.p.m. with additiona counter baance Engine Variants Variant VIII: Engine with Recoi-start on fywhee side (fig 2). Variant XI : Engine with eectric start 2 V and Recoi-start (fig. 3). Weights inc. tank, air fiter, and exhaust siencer Variant VIII 28.0 Variant XI kg bs. kg bs. kg bs. 3 6.7 72.2 33.0 72.7 48.0 05.8 37.8 83.3 53.3 7.9 Scope of Deivery of Engine Additiona equipment Engine tested for fu oad on test bench. Engine fitted with bower fan, variabe speed governor, ubricating oifiter, dry-type airfiter or oi-bath airfiter, automatic decompression system, automatic injection pump beeding, fiing device for start oi, strap for transportation (ony suitabe to carry the engine weight). Accessories: Toos and gasket for st maintenance, instruction booket, spare parts ist and Service Internationa Further equipment incuded in engine variants: Variant VIII: Recoi starter Variant XII: Eectric starter 2 V, Generator 4 V, engine wiring, gearing. Thanks to the compete programme of additiona equipment engine can be adapted to the specia requirements of every appication. As a minimum every engine needs the additiona equipment, necessary for operation.
Innovations Instaation dimensions are extremey sma with reference to the power output Low weight at high power output (8.5 kw acc. ISO 585 at r.p.m.) Exceent exhaust quaity according to EPA II / CARB II Good cod start performance Automatic vave adjustment device (optiona) Various accessories Number of cyinders Bore x Stroke Dispacement Mean piston speed at r.p.m. Compression ratio Lub. oi consumption Lub. oi capacity max. / min. Speed contro ISO net brake fue stop power (IFN) for intermittent oad acc. to DIN ISO 3046 ISO-standard power (ICXN) (0% overoad permissibe) and ISO-standard fue stop power (no overoad permissibe) acc. to DIN ISO 3046. For constant speed and constant oad. (ICFN) mm inches cu.in. m/s ft/min US qts Ide speed Static speed droop Hatz-Stand. B S Technica data Performance tabe 93 x 76 3.66 x 2.99 0.57 3.55 7.6 496 20.5 approx. 0.5 % of fue consumption, reated to fue oad.55 / 0.77.64 / 0.8 approx. 800 r.p.m. approx. 5 % at r.p.m. r.p.m. kw HP 8.0 0.9 3300 7.9 0.7 7.6 0.3 6.9 9.4 2300 6.2 8.4 2000 5.3 7.2 800 4.7 6.4 500 4. 5.6 7.3 9.9 3300 7.2 9.8 6.9 9.4 6.3 8.6 2300 5.6 7.6 2000 4.9 6.7 800 4.3 5.9 500 4.6 394 3 35 202 Dimensions Weight 480 55 inc. tank, air fiter, and exhaust siencer kg B50 bs. Variant VIII 49.2 08.4 Variant VIII 54.5 20.0 280 83 28.5 95 MOTORENFABRIK HATZ D-94099 RUHSTORF GERMANY Teephone: +49 (0) 85 3 / 3 9-0 Teefax: +49 (0) 85 3 / 394 8 www.hatz-diese.de emai: marketing@hatz-diese.de 5 / 642 E - 04.04-3 Printed in Germany Modifications, which serve the technica improvements, are reserved.