data model 2250 product guide contents features 272 mton (300 ton) capacity mton-m (12,294 ft-kips) Maximum Load Moment

data features 272 mton (300 ton) capacity 700 mton-m (2,29 ft-kips) Maximum oad Moment 9, m (300') eavy-ift 00,6 m (330') ong-reach 2,8 m (370') Fixed Jib on eavy-ift 8,9 m (390') Fixed Jib on ong-reach EPIC controls 2,9 m (00') uffing Jib 58,5 m (520') Fixed Jib on uffing Jib 335 kw (50 P) engine, standard 65 m/min (5 fpm) line speed standard 33 kn (30,000 lb) line pull standard 222 kn (50,000 lb) line pull optional 8 00 kg (0,000 lb) Clamshell capacity 22 600 kg (50,000 lb) Bulk Material andling capacity with duty-cycle package MAX-ERTM Attachment 50-mton (500-ton) capacity 226,7-mton (250-ton) luffing jib capacity RINGER Attachment 300-mton (,33-ton) capacity 05-mton (,50-ton) jib capacity Container andling Attachment 5,-mton (50-ton) capacity Fast, efficient self-assembly and disassembly Complete crane, maximum boom, fixed jib and counterweight ships on only 5 trucks Manitowoc CraneCARESM comprehensive support product guide contents Specifications 3 Outline Dimensions 9 Transport / Assembly 5 Performance Data 7 Combinations 25 Main Range / oad Charts 28 ong-reach Range / oad Charts 30 Fixed Jib Range / oad Charts 32 uffing Jib Range / oad Charts 38 Fixed Jib on uffing Jib Range / oad Charts 2 MAX-ER TM 2000 Complete Information 6 M-200 RINGER Complete Information 85 Elevated Cab, Container, Bulk Material 97 CraneCARE SM 0

2 index No. 2250 Basic Crane Engine(s) Controls ydraulic System Drums & aggings oist Swing System Support System Counterweights Operator s Cab Carbody, Rotating Module Crawlers Optional Self-erect System ook block/weight ball Miscellaneous Optional Equipment Points Working Weights Transport/Assembly CraneCARE SM Specifications 3-8 3 3 3 3-, 2-23, 23 7 7 8 8 8 23 5 0-06 Outline Dimensions and Weights 9-0- 0 0 6 Wire Rope engths Wire Rope Specifications Raising Combinations Range Diagram and Capacity Charts No. No. with eavy-ift Top No. with eavy-ift Top with No. 32 Fixed Jib No. with eavy-ift Top with No. 33 or 33A uffing Jib No. with eavy-ift Top with No. 0 Fixed Jib on No. 33A or 33 uffing Jib -5 5 5 5-2 2 3 3-7 7 8 9 2 2 2 2 2 2 2 2 25 25 27 27 28-29 32-3 38-2-5 No. ong Reach Top No. with ong Reach Top with No. 32 Fixed Jib 5-2 20 20 30-3 33 26 26 30-3 35-37 MAX-ER TM 2000 (with Counterweights, No. Mast, and straps) No. 79 with eavy-ift Top No. 79 eavy-ift with No. uffing Jib No. 79- ong-reach No. 79- ong-reach with No. 32 Fixed Jib No. 79- ong-reach with No. 33 or 33A uffing Jib No. 79- ong-reach with No. 32 Fixed Jib on No. 33A or 33 uffing Jib Drums and aggings 5-6 5 6 6 58 6-9 9-50 50 50 5 52-53 5 5 55 56 57 57 57 57 57 57 59 59 59 59 59 59 60 6 62 63 6 65 66-67 73-76 68-69 70-72 77-80 8-8 M-200 RINGER Configurations and Systems No. 72 or 72A No. 75A No. 72A No. 75 Fixed Jib No. 72A No. 82 Fixed Jib Drums and aggings, oist Elevated Cab Container andling No. Main with No. 36 uffing Jib Bulk Material andling No. Main with Duty Cycle Upper Point 6-7, 86 7 6 7 7 6-7, 88-89 8 8 85 97 98 00 87 87 88 0 89 89 89 0 02-03 02-03 02-03 00 02-03 90-9 92-93 9-96 0 02-03

specifications Upperworks Engine Cummins Model N-C50 diesel, 6 cylinder, 335 kw (50 BP) @ 200 governed RPM. Optional: Cummins Model N-C525E-CEECT diesel, 6 cylinder, 392 kw (525 BP) @ 200 governed RPM. Optional: Caterpillar Model 306C-DITA diesel, 6 cylinder, 335 kw (50 BP) @ 200 governed RPM. Includes engine block heater (20 V), ether starting aid, alcohol injector in air line, disconnect clutch for cold weather starting, high silencing muffler, hydraulic oil cooler, radiator and fan. Multiple hydraulic pump drive transmission provides independent power for all machine functions. Two 2 volt maintenance-free, Group 8D batteries, 55 CCA at -8 C (0 F), 2 volt starting and 20 amp alternator. ydraulic reservoir has 2 l (2 gal) capacity and is equipped with breather, clean out access, and internal diffuser. Each function is equipped with relief valves to protect the hydraulic circuit from overload or shock. System includes oil cooler and replaceable, spin-on, tenmicron full flow filter. All oil is filtered before entering the hydraulic pumps. System kg/cm 2 (psi) lpm (gpm) oisting Drums 22 (6,000) 598 (58) oisting Drums 22 (6,000) 598 (58) oist & Auxiliary Drum 22 (6,000) 299 (79) Swing 22 (6,000) 299 (79) eft Crawler 22 (6,000) 299 (79) Right Crawler 22 (6,000) 299 (79) Optional: Independent front drum 22 kg/cm 2 (6,000 psi) at 598 lpm (58 gpm) powered by travel pumps. Optional: Double-motor swing system 22 kg/cm 2 (6,000 psi) at 299 lpm (79 gpm). 3 One 6 l (70 gal) capacity diesel fuel tank, mounted on rear of upperworks, with level indicator in operator s cab. Optional: Cold-weather package with heater for fluids, brake pedals, batteries, and computer display. Controls Modulating electronic-over-hydraulic controls provide infinite speed response directly proportional to control lever movement. Controls include Manitowoc's exclusive EPIC Electronically Processed Independent Control system providing microprocessor driven control logic, pump control, on-board diagnostics, and service information. Block-up limit control is standard for hoist and whip lines. Integrated oad Moment Indicator system (MI) is standard for main boom and upper boom point. Function cut-out or warning only operation is selected via a keyed switch on the MI console. Optional: Travel and swing alarms. Optional: Anemometer (wind indicator). ydraulic System Six high-pressure piston pumps, driven by a multi-pump transmission, provide independent closed-loop hydraulic power for the hoisting drums, boom hoist, swing, left crawler and right crawler. Drums Basic machine is equipped with a split rear drum shaft assembly. Right drum is 0 mm (-9/0") wide and 572 mm (22-/2") diameter. eft drum is 80 mm (8-9/0") wide and 572 mm (22-/2") diameter. Drum shaft is antifriction bearing mounted and is driven by a variable-displacement hydraulic motor through a planetary reduction. Internal-expanding drum clutches are spring set, air released. External-contracting drum brakes are air applied, spring released. Parking brakes are spring set, air released. Drum rotation indicator is standard for each drum. Operator may select free-fall or powered lowering mode using a selector switch. Optional: Two equal-split rear drums in place of standard drums. Each drum is 80 mm (3-9/0") wide and 572 mm (22-/2") diameter. Optional: Interlock that permits split rear drums to be used as single drum with two brakes. Recommended for concrete bucket operations. Optional: ydraulically powered auxiliary front drum 572 mm (22-/2") diameter, 0 mm (-9/0") wide rated at 33, kn (30,000 lb) line pull. For liftcrane, 963 mm (37.9") wide lagging provided. Drum shaft antifriction bearing mounted on rotating bed. Drum antifriction bearing mounted on shaft and equipped with internal-expanding clutch, external-contracting brake, and drum-rotation indicator. Includes third-drum control system. Bail limit is optional.

specifications Optional: Other drum sizes, laggings, and additional drums. Optional: Bolt-on 622 mm (2-/2") laggings for liftcrane or clamshell applications. Optional: Wire rope for various applications. oist Independent boom hoist with two grooved drums, each 505 mm (9-7/8") wide and 58 mm (23") diameter. Includes 297,2 m (975') of (") diameter wire rope for reeving 2 part boom hoist line. Drums are powered by a variable-displacement hydraulic motor coupled to an integral brake and a planetary reduction gearbox. Ratcheting pawl and rotation indicator are standard. hoist speed: raise 9, m (300') full main boom from 0-82 in 2 minutes, 0 seconds. Swing System igh strength fabricated steel alloy rotating bed is mounted on 2,95 m (9' 8") diameter triple-row roller bearing turntable. Rotating bed s upper and lower modules are fabricated steel and connected by four power actuated pins. ydraulic connection of upper and lower modules is made through -FACT hydraulic quick coupler. Enclosures are included on both sides of upper module. Independent swing powered by a fixed displacement hydraulic motor coupled to a planetary reduction gearbox with internal brake. 360 positive swing lock. Swing system maximum speed:.8 rpm. Counterweight UNIT WEIGT TOTA WEIGT QTY. ITEM kg lb kg lb Upperworks Tray 7 78 39,200 7 78 39,200 Center Box 6 783 37,000 6 783 37,000 6 ower Side Box 7 03 5,500 2 86 93,000 SERIES TOTA 76 750 69,200 Upperworks 2 Upper Side Box 9 072 20,000 8 0,000 Carbody 2 Center Box 3 608 30,000 27 26 60,000 Optional: Add to SERIES for SERIES 2 TOTA 22 0 269,200 Upperworks 2 Upper Side Box 9 072 20,000 8 0,000 Carbody Side Box 6 80 5,000 27 26 60,000 Optional: Add to SERIES 2 for SERIES 3 TOTA 67 70 369,200 Includes connecting pins, brackets, and stops. Operator s Cab Fully enclosed and insulated steel module mounted at left front corner of rotating bed on a pivoting frame that permits cab to be repositioned for transportation. Module is equipped with sliding door, large safety glass windows on all sides and roof. Signal horn, cab space heater, front and roof windshield wipers, dome light, sun visor and shade, fire extinguisher and air circulating fan are standard. Optional: Air conditioning for operator s cab. Optional: Nylon protective window covers. Optional: 0,7 m (35') elevated cab, 320 mm (52") wide, with catwalks and railing. Attachments Support System The 8,5 m (28') long retractable gantry provides the geometry to raise and support all combinations of boom and jib. The telescoping square-tube backhitch is equipped with power actuated locking pins. -hoist rope reeved through sheaves in the gantry and equalizer forms 2-part boom-hoist rigging, and highstrength steel straps connect the equalizer to the boom top. Air cushioned boom stop and automatic boom stop are standard. Gantry includes hydraulic raising cylinders capable of lifting the upperworks counterweight for installation and removal. Counterweight attaches to rotating bed with power actuated pins. No. with eavy-ift Top The liftcrane is equipped with a 2,3 m (70') No. angle-chord boom consisting of a two-piece 2,2 m (0') butt and a 9, m (30') heavy-lift top with nine 762 mm (30") diameter roller bearing sheaves on one shaft. Includes rope guides, boom angle indicator, and a 59 kg (,30 lb) hook and weight ball. The No. boom utilizes steel suspension straps and Manitowoc s patented, exclusive FACT TM connection system consisting of two vertical pins, two horizontal connection pins, and alignment pads for each boom connection location. Because the 2250 uses steel-strap rigging, boom inserts from the M-250 cannot be used on the 2250. uffing jib preparation is standard.

specifications Optional: 3,0 m (0'), 6, m (20'), and 2,2 m (0') No. boom inserts with steel boom suspension straps, and FACT TM connection system. Optional: Intermediate suspension, required for boom lengths of 85,3 m (280') or more. Optional: Detachable upper boom point with one 762 mm (30") diameter tapered roller bearing steel sheave with rope guard, for liftcrane use on heavy-lift and longreach boom tops. (Same upper point used on Models 777, 777T, 888, and M-250.) No. ong Reach Top Optional: 2,3 m (70') long reach top consisting of 9, m (30') transition insert and 2,2 m (0') top with three 762 mm (30") diameter straight-roller-bearing sheaves. Includes steel rigging straps, wire rope guide, and hardware for MI. FACT TM connectors at lower end of transition insert enable mounting to standard No. boom inserts. Transition insert can be purchased with FACT TM or pin connectors at top, permitting either No. 33A (pinned) or No. 33 (FACT TM ) luffing jib top to also be used as longreach top for No. boom. Optional: Intermediate suspension, required for boom lengths of 9, m (300') or more. No. 32 Fixed Jib Optional: 2,2 m (0') basic No. 32 fixed jib consists of 6, m (20') butt and 6, m (20') top, with 6, m (20') strut, pendants, backstay, and MI hardware. Optional: No. 32 fixed jib 6, m (20') inserts with pendants for total jib lengths to 36,6 m (20'). Use on No. with heavy-lift or long-reach boom top. on No. 35 luffing jib. No. 33A or 33 uffing Jib Optional: Parts for outside-assist raising (where code permits). No. 0 Fixed Jib Optional: Basic 2,2 m (0') No. 0 fixed jib consists of 6, m (20') butt and 6, m (20') top, with 6, m (20') strut, pendants, backstay, and MI hardware. Optional: No. 0 fixed jib inserts 6, m (20') with pendants for total jib lengths to 36,6 m (20'). Use on No. 33A or 33 luffing jib. Optional: Parts to convert No. 32 fixed jib to No. 0 fixed jib. MAX-ER TM 2000 Components to make up 36,6 m (20') No. 79 boom including one 9,m (30') No. 79 boom butt, one 6,m (20') No. 79 boom insert, one 2,2 m (0') No. 79 boom insert with equalizer platform, one 7,6 m (25') No. 79 transition insert, one,52 m (5') No. 79 boom top (5 sheaves), deflector sheave assembly (3 sheaves), boom equalizer (5 sheaves), steel rigging straps, and MI hardware for No. 79 boom top. Automatic boom stop, air-cushioned physical boom stop, and 793 m (2,600') of boom hoist wire rope (can be used as load line on 2250 crane). Components to make up 39,6 m (30') No. mast including one 2,2 m (0') No. mast butt, one 2,2 m (0') No. mast top (5 sheaves), physical mast stop, wire rope guide, and steel rigging straps. Note: Requires use of 3,0 m (0') No. boom insert and 2,2 m (0') No. boom insert from 2250 liftcrane. Main hoist drum assembly grooved for 29 mm or (-/8") wire rope mounted in No. 79 boom butt. Integrated boom and mast adaptor frame. 5 Optional: 2,3 m (70') basic No. 33A (pin connected) or No. 33 (FACT TM ) luffing jib with MI hardware consists of 9, m (30') butt and 2,2 m (0') top with three 762 mm (30") roller bearing sheaves and basic pendants, fixed strut, jib strut, backstay pendants, boom point guide wheel, luffing jib hoist with ratcheting pawl, quick-disconnect for luffing jib hoist piping, (7/8") luffing jib hoist line, and 76 mm (8-3/") diameter grooved luffing drum. Optional: 3,0 m (0'), 6, m (20'), and 2,2 m (0') No. 33A or 33 inserts with pendants for total jib lengths to 6,0 m (200'). Note: 2250 liftcrane requires MAX-ER 2000 preparation, Series 2 counterweights on carbody, and Series counterweights on upperworks. Note: The MAX-ER 2000 attachment cannot be used on an existing liftcrane without modification, and cannot be used on M-250 model. The MAX-ER 2000 attachment uses up to 209 560 kg (62,000 lb) of MAX-ER counterweight supported on a carrier behind the basic crane. The MAX-ER counterweight is attached to the top of the mast by straps and to the rear of the 2250 s upperworks by an adaptor arm and trailer arm inserts.

specifications 6 The MAX-ER counterweight can be carried by a hanging counterweight tray or a wheeled counterweight carrier. The wheeled counterweight carrier uses eight large offroad vehicle tires, which can be positioned for traveling, crabbing, or swinging. It also includes hydraulic support jacks and pads. Either counterweight assembly can be positioned 9, m (30'); 2,2 m (0'); or 5,2 m (50') behind the 2250 s centerline of rotation to meet the capacity requirements of an individual lift. ITEM QTY UNIT WEIGT TOTA WEIGT kg lb kg lb Wheeled Carrier 3 609 76,300 3 609 76,300 Counterweight Boxes ower Side* 2 5 897 3,000 70 760 56,000 ower Center** 6 6,200 38 66 85,200 Upper Side - Right*** 2 9 072 20,000 8 0,000 Upper Side - eft*** 2 9 072 20,000 8 0,000 Upper Center* 6 80 5,000 27 26 60,000 Adaptor Plate - Front 2 5,000 907 2,000 Adaptor Plate - Rear 2 502,06 003 2,22 Miscellaneous parts 3 288 3 288 * Optional: 8 each 8 85 kg (9,500 lb). 209 560 62,000 ** Optional: each 9 639 kg (2,250 lb). ***From Model 2250 Series 3 Crane. Optional: 2,2 m (0') No. 79 boom insert with stowable steel rigging straps and wire rope guides, one required in boom rigging for all boom lengths over 36,6 m (20'). Optional: 2,2 m (0') No. 79 boom insert with stowable steel rigging straps for boom lengths over 8,8 m (60') up to 09,7 m (360'). Optional:,6 m (5') No. 79- transition insert with wire rope guide and stowable steel rigging straps for use of No. boom insert(s) and top for longreach boom Optional: No. luffing jib. Components to make up 2,3 m (70') basic luffing jib include a 5,2 m (50') jib strut with 7 sheaves,,3 m (7') main strut with 7 sheaves, jib strut stop, luffing jib stop, main luffing strut backstay straps, basic luffing jib steel rigging straps, combination upper point and luffing jib raising wheel, luffing drum assembly, 59 m (,800') luffing drum wire rope, and wire rope guide(s) as required. Note: Basic luffing jib utilizes 2,2 m (0'), No. boom butt and 9, m (30') No. boom top from 2250 liftcrane. uffing jib also uses No. boom inserts and straps from 2250 liftcrane for luffing jib lengths greater than 2,3 m (70'). Optional: 08-mton (50-ton) load block with duplex hook Optional: 227-mton (250-ton) load block with duplex hook Optional: iftcrane load line 29 mm or (-/8") rotation resistant. Optional: Components to allow for self-assembly of boom and other components utilizing mast, boom hoist drum, and boom equalizer. M-200 RINGER 8,3 m (60') diameter ring structure with wear plates, crawler side frame attaching beams and "RINGER SWINGER " gear segments. RINGER support pedestals with manual screw style adjustments. ydraulic jacking system, including jacks, controls and ring leveling gauge. carrier with boom and mast hinge pins. Carrier includes mounting for Model M-200 hoist drum. Counterweight carrier with attachment beams to machine rear and counterweight lift indicator in operator's cab. Optional: 7 8 kg (,577,600 lb) of counterweight for 800-mton (900-ton) rating. Optional: 9 75 kg (2,07,000 lb) of counterweight for 300-mton (,33-ton) rating. No. 75A boom attachment 800-mton (900-ton) capacity. 5,7 m (50') No. 75A basic boom, including 5,2 m (50') No. 75A butt, 5,2 m (50') No. 75A insert and 5,2 m (50') No. 75 top. 5,7 m (50') No. 75A mast including 7,6 m (25') No. 75 mast butt, two 5,2 m (50') No. 75A inserts, 7,6 m (25') No. 75 mast top, counterweight straps and backhitch straps. Mast self-erect system, steel strap rigging, equalizer, and boom hoist wire rope for 32-part boom hoist reeving for No. 72 boom. Air-cushioned physical boom stop, air automatic boom stop, boom angle indicator. No. 75A 800-mton (900-ton) boom point with sixteen 067 mm (2") diameter sheaves grooved for (-5/8") diameter rope. RINGER travel assist system. Two "RINGER-SWINGER " assemblies. Single-drum Model M-200 hoist, complete with lagging grooved for (-5/8") wire rope, hydraulic power provided by 2250 liftcrane, for load hoist drum. Optional: 7,6 m (25') and 5,2 m (50') No. 75 boom inserts and rigging straps for total boom lengths to 2,9 m (00').

specifications No. 72A boom attachment. The following components must be added to the No. 75A boom attachment to achieve a No. 72A liftcrane attachment for the M-200 RINGER. Conversion to two drum M-200 hoist [each drum includes lagging grooved for (-5/8") wire rope], including additional Cummins N-C50 diesel engine rated at 335 kw (50 P), which supplements total load hoist and swing capability. 6,6 m (53') No. 72A boom, including 5,2 m (50') butt, one 5,2 m (50') insert and 5,2 m (50') transition insert with 0,9 m (3') boom top/jib adaptor. Strap rigging, equalizer and boom hoist wire rope for 36-part reeving in place of 32-part reeving. Two additional "RINGER-SWINGER " assemblies and interconnecting piping. Optional: 7,6 m (25') and 5,2 m (50') No. 72A boom inserts and rigging straps for total boom lengths to 22,8 m (03'). Optional: (-5/8") wire rope for load line and (- /8") wire rope for whip line. Optional: 300-mton (,33-ton) lower point. Optional: 300-mton, (,33-ton) load block with quad hook and hanger block. Optional: No. 72A to No. 75 boom picture frame insert for making No. 72A-75 combination boom. No. 82 structural fixed jib for No. 72A boom Single piece 5,2 m (50') structural jib and jib strut pin to No. 72A boom top and utilize the 800-mton (900-ton) boom point from the No. 75 fixed jib. Rigging consists of structural straps, links and pins. Optional: Front auxiliary drum, with ratchet and pawl. Includes hydraulic piping and liftcrane lagging grooved for (-/8") rope. NOTE: Auxiliary drum cannot run simultaneously with M-200 main hoist drums Optional: 80-mton (88-ton) upper boom point assembly for use with No. 75A boom, No. 72A boom, or No. 75 jib. Consult Manitowoc Sales department for other options. owerworks Carbody Connects rotating bed and crawler frames. Fabricated steel rotating bed lower module mounts to single-piece carbody by 2,9 m (9' 8") diameter triple-row roller bearing turntable. Each crawler frame is mounted to the carbody with FACT connection system power-actuated pins. Crawler drive motors are mounted on carbody. Permits crawler removal without opening travel drive hydraulic circuit. 7 The 9 75 kg (2,07,600 lb) of counterweight required for 300-mton (,33-ton) rating can be supplied by Manitowoc. No. 75 Jib Optional: 30, m (00') No. 75 jib, backstay straps and rigging components utilizes No. 75 boom top and butt from 800-mton (900-ton) lift attachment and No. boom from 2250 for jib strut. Optional: 7,6 m (25') and 5,2 m (50') No. 75 inserts and straps for total lengths up to 76,2 m (250'). MAX-RINGER TM suspended counterweight attachment Suspended counterweight attachment consists of structural backhitch links at the No. 75A mast top, structural backhitch straps, and suspended counterweight tray. Counterweight for the suspended counterweight attachment will be quoted upon request or may be customer supplied. Crawlers Crawler assemblies are 9,0 m (30' 9") long with,22 m (8") wide cast steel crawler pads and sealed low maintenance intermediate rollers. Each crawler is powered independently by a variable displacement hydraulic motor. Carbody mounted drive motors are connected to crawler final reduction via telescoping shafts. This permits crawlers to be removed without opening their hydraulic circuits. Crawlers provide ample tractive effort for counter rotation with full rated load. Maximum ground speed of,6 kph (.0 mph). Optional: 220 mm (8") wide flattened treads for 9 mm (5-/") hard surface bearing width [instead of 5 mm (20-/") bearing width of standard treads]. Optional: 52 mm (60") wide treads (no self erect option allowed).

specifications 8 Optional Equipment Optional: Self-erect system, includes two wire rope guides for crawler handling, boom butt handling cylinder, upperworks jacking cylinders with pads, alignment device, four carbody support pedestals, -mton (5-ton) assembly block, crawler handling chains, 8,7 m (60') of (-/8") diameter rigging line. Optional: Blocks and ooks, each with 762 mm (30") roller-bearing sheaves for 29 mm or (-/8") wire rope, a roller-bearing swivel hook, a hook latch, and a swivel lock. 3,6-mton (5-ton) swivel hook and weight ball -mton (5-ton) hook block with one sheave [assembly block] 5-mton (60-ton) hook block with two sheaves 9-mton (00-ton) hook block with three sheaves 272-mton (300-ton) hook block with nine sheaves and a duplex swivel hook Optional: Wire rope for various applications. Optional: Equipment and testing for special code compliance. Optional: Preparation for MAX-ER TM 2000. Optional: Preparation for M-200 RINGER. Optional: ydraulic Test Kit: required to properly analyze the performance of the EPIC control system. Optional: Service Interval Kits: for the regularly scheduled maintenance of general crane operations. Optional: ighting Packages: consult dealer for available options. Optional: Special Paint [color(s) other than Manitowoc standard red and black]. Optional: Custom vinyl decal(s) of customer name and/or logo from artwork supplied by customer. Optional: Export Packaging: basic crane, boom and jib sections. MAX-ER TM and RINGER export packaging available. Optional Applications Clamshell/Material Rehandling Conversion from iftcrane To Material Rehandling Clamshell 8 kg (0,000 lb) Rating [No. eavy ift only] Single front drum in addition to split rear drum. Front drum and right rear drums are equipped with laggings 622 mm (2-/2") in diameter, mm (-29/32") wide, and grooved for (-/") wire rope. Tapered pins for rotating bed connection. Pressure rollers for right rear and front drum. Tagline, Rud-O-Matic No. 866, three barrel with 762 mm (30") wheel. Delete -FACT in rotating module and powered pins in crawlers. Conversion from iftcrane to 22 68 kg (50,000 lb) Material Rehandling / 8 kg (0,000 lb) Digging Clamshell [No. eavy-ift only]. Full width front and rear drums, each 69 mm (66-5/8") wide, 572 mm (22-/2") in diameter, driven independently, and equipped with double brakes. Each drum also equipped with lagging 3 mm (5") wide, 622 mm (2-/2") in diameter, and grooved for (-3/8") wire rope. Tapered pins for rotating bed connection. Pressure rollers for front and rear drums. ydraulic tagline. Second swing drive and larger swing pump. Cummins N-C525 engine rated 39 kw (525 BP) at 200 RPM in place of standard engine. Duty cycle upper boom point with two 90 mm (7") diameter sheaves. Continuous-length boom-support pendants for the boom length purchased, in place of standard steel straps. Delete -FACT in rotating module and powered pins in crawlers. Delete oad Moment Indicator (MI) system. Optional: inserts and continuous-length boom pendants in 3, m (0') increments for boom lengths from 2, m (80') to 2,7 m (0'). No. 36 Container andling Jib Conversion from iftcrane to No. 36 Container andling jib. Equal-split rear drum assembly, with two drums, each 80 mm (3-9/0") wide, in place of standard unequalsplit rear drum. iftcrane laggings for both drums, 80 mm (3-9/0") wide, 622 mm (2-/2") in diameter and grooved for 29 mm or (-/8") rope. Tapered pins for rotating bed connection. Block up limit for No. boom and No. 36 luffing jib. 2, m (80') No. boom in place of 2,3 m (70') basic boom. 2,3 m (70') basic No. 36 luffing jib for layout assembly consisting of pin connected 6, m (20') jib butt, 5,2 m (50') top with two 762 mm (30") diameter sheaves spread 520 mm (60") apart to provide horizontal stability of the container, basic pendants, fixed strut, jib strut, backstay pendants, boom point guide wheel, luffing jib hoist with ratchet and pawl, and (7/8") luffing jib line. ydraulic container tagline system. Slack-rope detection with visual and audible alarm in operator s cab. Two 27-mton (30-ton) single sheave hook blocks. Delete -FACT and power pins in rotating module. Delete oad Moment Indicator (MI). Delete 59 kg (,30 lb) hook and weight ball. Delete powered pins in crawlers.

outline dimensions 0,09 m (3' 0") 5,03 m (6' 6") 9, 3 m (37' 3"). Split Rear Drum Shaft for Main and Whip ines 2. oist Drums ROTATION 9,98 m (32' 9") 2 3,63 m (' ") 2,0 m (7' 0"),27 m (' 2") 2, m (8' 0") 3,6 m (2' 0") 0,80 m (2' 8"),65 m (5' 3") 5,23 m (7' 2") WITOUT COUNTERWEIGTS 7,6 m (23' 6") 7,25 m (23' 0") TAISWING 2,90 m (2' ") 9,37 m (30' 9") 0,89 m (35' 9"),98 m (6' 6") 0,73 m (2' 5") 7,0 m (23' 0") ROTATION 0,26m (0' 0") 7,9 m,22 m (' 0"),52 m (5' 0") OPTIONA PADS (26' 0") 8,23 m (27' 0") WIT OPTIONA,52 m (5' 0") CRAWER PADS,2 m (3' 9")

outline dimensions Upperworks Module x 0 ength 3,6 m 3' 2" Width 3,00 m 9' 0" eight 2,8 m 7' 2" Weight 38 563 kg 85,020 lb Note: Weight includes rotating bed rear section, diesel power plant, operator s cab, gantry, gantry lifting cylinders, boom hoist with wire rope, equalizer, split rear drum shaft with hoist and whip lines, optional self assembly jacks, full hydraulic fluid reservoir, and half tank of fuel. W Carbody, Rotating Module & ower Butt 3,7 m (2') x ength 8,8 m 28' " Width 2,95 m 9' 8" eight 2,63 m 8' 8" Weight 29 87 kg 6,350 lb Note: Weight includes turntable bearing, one swing drive, rotating union, 3,7 m (2' 0") lower boom butt, optional boom-butt handling cylinder, and four carbody support pedestals. W Crawlers x 2 ength 9,37 m 30' 9" Width 2,2 m 7' 3" eight,26 m ' 2" Weight 2 2 kg 53,820 lb W Upper Center Counterweight x ength 2,08 m 6' 0" Width 2,72 m 8' " eight,27 m ' 2" Weight 6 782 kg 37,000 lb W W Counterweight Tray x ength 2,9 m 7' 2" Width 6,99 m 22' " eight 0,6 m 2' " Weight 7 72 kg 39,5 lb Note: Weight includes lifting frames. Side Counterweight x 6 ength 2,0 m 6' 7" Width,93 m 6' " eight 0,8 m ' 7" Weight 7 030 kg 5,500 lb Note: Three each of left- and right-side configurations required. Option

outline dimensions W Side Counterweight Series 2, 3 x 2, ength 2,0 m 6' 7" Width,93 m 6' " eight 0,58 m ' " Weight 9 07 kg 20,000 lb Note: eft- and right-side configurations are required. Carbody Center Counterweight W Carbody Center Counterweight Series 2, 3 x 2 ength 3,5 m ' " Width,80 m 5' " eight 0,89 m 2' " Weight 3 607 kg 30,000 lb W Carbody Side Counterweight Series 3 x ength 2,8 m 7' 2" Width 0,86 m 2' 0" eight 0,89 m 2' " Weight 6 803 kg 5,000 lb No. Upper Butt 8,5 m (28') & Wire Rope Guide, Stop x ength,9 m 39' 2" Width 2,59 m 8' 6" eight 3,5 m ' " Weight 5 9 kg,50 lb No. Top 9, m (30') & Wire Rope Guide, Straps, ower Point x ength 0,06 m 33' 0" Width 2,59 m 8' 6" eight 2,90 m 9' 6" Weight 5 657 kg 2,75 lb No. ong Reach Transition Insert 9, m (30') & Wire Rope Guide, Straps x ength 9,63 m 3' 7" Width 2,59 m 8' 6" eight 2,6 m 8' 8" Weight 2 79 kg,805 lb Note: Must specify if to be used with pin or FACT TM connections for long reach boom top. Option

outline dimensions 2 No. ong Reach Top 2,2 m (0') & Wire Rope Guide, ower Point, Straps x ength 3,06 m 2' 0" Width 2,08 m 6' 0" eight,83 m 6' 0" Weight 3 529 kg 7,785 lb Note: Can be used as No. 33A or No. 33 luffing jib top. No. Insert 3,0 m (0') & Straps x, 2 ength 3,23 m 0' 7" Width 2,59 m 8' 6" eight 2,59 m 8' 6" Weight 05 kg 2,20 lb No. Insert 6, m (20') & Straps x, 2 ength 6,28 m 20' 7" Width 2,59 m 8' 6" eight 2,59 m 8' 6" Weight 72 kg 3,805 lb No. Insert 2,2 m (0') & Straps x, 2, 3,, 5 ength 2,38 m 0' 7" Width 2,59 m 8' 6" eight 2,59 m 8' 6" Weight 2 96 kg 6,500 lb ight Weight 2 5 kg 5,330 lb Note: One light weight insert required for lengths above 82,3 m (270') with heavy-lift top or for lengths above 88, m (290') with long-reach top. No. 32 Fixed Jib 2,2 m (0') & Strut, Pendants x ength 2,78 m ' " Width,22 m ' 0" eight,60 m 5' 3" Weight 2 60 kg 5,70 lb No. 32 Jib Insert 6, m (20') & Pendants x, 2, 3, ength 6,25 m 20' 6" Width,22 m ' 0" eight 0,9 m 3' 0" Weight 66 kg,030 lb Option

outline dimensions No. 33A or 33 uffing Jib Butt 9, m (30') & Struts x ength,2 m 36' 0" Width 2,07 m 6' 0" eight 3,6 m ' " Weight 7 793 kg 7,80 lb 3 No. 33A or 33 uffing Jib Top 2,2 m (0') & Wire Rope Guide, ower Point, Pendants x ength 3,06 m 2' 0" Width 2,08 m 6' 0" eight,65 m 5' 5" Weight 3 69 kg 8,05 lb Note: Can be used as long-reach top for No. boom when combined with No. long-reach transition insert 9, m (30'). No. 33A or 33 uffing Jib Insert 3,0 m (0') & Pendants x ength 3,8 m 0' 5" Width 2,07 m 6' 0" eight,65 m 5' 5" Weight 559 kg,235 lb No. 33A or 33 uffing Jib Insert 6, m (20') & Pendants x ength 6,22 m 20' 5" Width 2,07 m 6' 0" eight,65 m 5' 5" Weight 960 kg 2,20 lb No. 33A or 33 uffing Jib Insert 2,2 m (0') & Pendants x ength 2,32 m 0' 5" Width 2,07 m 6' 0" eight,65 m 5' 5" Weight 72 kg 3,780 lb No. 0 Fixed Jib 2,2 m (0') & Strut, Pendants x ength 2,78 m ' " Width,22 m ' 0" eight,63 m 5' " Weight 2 975 kg 6,558 lb Option

outline dimensions No. 0 Jib Insert 6, m (20') & Pendants x, 2, 3, ength 6,20 m 20' " Width,22 m ' 0" eight 0,9 m 3' 0" Weight 67 kg 030 lb Upper Point x ength 2,6 m 8' 8" Width 0, m ' " eight 0,8 m 2' 8" Weight 2 kg 930 lb Extended Upper Point 6, m (25') & Strut, Pendants x ength 8,28 m 27' 2" Width,22 m ' 0" eight,80 m 5' " Weight 2 38 kg 5,250 lb W ook block for 28 mm (-/8") wire rope Capacity 272 mt 300 t ength 2, m 7' " Weight 268 kg 9,0 lb Width, m 3' 9" Capacity 9 mt 00 t ength,98 m 6' 6" Weight 770 kg 3,900 lb Width 0,89 m 2' " Capacity 5 mt 60 t ength,80 m 5' " Weight 92 kg 2,030 lb Width 0,89 m 2' " Capacity mt* 5 t* ength,83 m 6' 0" Weight 79 kg 2,600 lb Width 0,9 m 3' 0" *Assembly block D Weight Ball Capacity/Swivel 3,5 mt 5 t Diameter 0,6 m ' 6" Weight 59 kg,30 lb ength,22 m ' 0" Option

transport data Trailer oad Out Summary Model 2250 Series 3 No. 32 Fixed Jib 36,6 m (20') and No. 9, m (300') 5 Item Weight Quantity on each Item Trailer oad # kg (lb) 2 3 5 6 7 8 9 0 2 3 5 Upperworks Module 38 563 (85,020) Carbody, Rotating Module and ower Butt 29 87 (6,350) Crawler Assembly 2 2 (53,820) Upper Center Counterweight 6 782 (37,000) Counterweight Tray & ifting Frames 7 72 (39,5) Side Counterweight Series, 2, 3 7 030 (5,500) 2 2 2 Side Counterweight Series 2,3 9 07 (20,000) Carbody Center Counterweight Series 2,3 3 607 (30,000) Carbody Side Counterweight Series 3 6 803 (5,000) 8,5 m (28') No. Upper Butt 5 9 (,50) 9, m (30') No. Top & Straps 5 657 (2,75) 3,0 m (0') No. Insert & Straps 05 (2,20) 6, m (20') No. Insert & Straps 72 (3,805) 2,2 m (0') No. Insert & Straps 2 96 (6,500) * 2,2 m (0') No. 32 Basic Jib, Strut & Pendants 2 60 (5,70) ** 6, m (20') No. 32 Jib Insert 66 (,030) 2** 272 mton (300 ton) ook Block 3 628 (8,000) mton (5 ton) Assembly ook Block 79 (2,600) 3,6 mton (5 ton) Weight Ball 59 (,30) No. Upper Point 2 (930) Miscellaneous Approximate Total Shipping Weight kg (lb) 907 (2,000) 38 563 (85,020) 29 87 (6,350) 2 2 (53,820) 2 2 (53,820) 7 366 (38,290) 8 356 (0,75) 8 820 (,500) 8 820 (,500) *2,2 m (0') No. ight Weight insert 2 7 kg (5,330 lb). **Jib inside of 2,2 m (0') No. insert. Trailer configurations - (#) 3 axle flat; (#2) 3 axle double drop 0,6 m (2") or lower; (#3-) 3 axle step or flat; (#5) double drop; (#6-) step deck; (#2-5) flat. 7 382 (38,330) 9 60 (3,20) 7 938 (39,560) 8 972 (,835) 9 223 (,385) 20 0 (5,000) 20 0 (5,000)

assembly 6 Note: Read the assembly folio in the operator s manual for a complete description of approved crane assembly procedures.

performance data Wire Rope engths No. with eavy-ift Top - or - Fixed Jib No. 32 on No. with eavy-ift Top 7 or and Fixed Jib ength ( Part of ine) m (ft) Whip ine eft Rear or Front Drum (2 Parts of ine) (3 Parts of ine) ( Parts of ine) m oist line Right Rear Drum Maximum Required Parts of (ft) ine 2,3 (70) 58 (90) 8 (275) 2 (,50) 8 2, 6 (20) 9 (300) 95 (,625) 8 27, (90) 70 99 (325) 526 (,725) 7 30,5 (00) 76 07 (350) 59 (,800) 6 33,5 (0) 82 (375) 59 (,800) 3 36,6 (20) 88 (290) 30 (25) 59 (,800) 3 39,6 (30) 9 (30) 37 (50) 59 (,800) 2 2,7 (0) 0 (330) 5 (75) 60 (2,000) 2 5,7 (50) 07 (350) 52 (500) 60 (2,000) 8,8 (60) 3 (370) 60 (525) 60 (2,000) 0 5,8 (70) 9 (390) 75 (575) 22 (725) 282 (925) 60 (2,000) 0 25 (0) 83 (600) 236 (775) 297 (975) 625 (2,050) 0 (90) 3 (30) 9 (625) 25 (825) 32 (,025) 625 (2,050) 9 6,0 37 (50) 98 (650) 259 (850) 328 (,075) 625 (2,050) 8 (20) 3 (70) 206 (675) 27 (900) 33 (,25) 625 (2,050) 8 67, (220) 9 (90) 22 (725) 282 (925) 358 (,75) 625 (2,050) 8 70, 55 (50) 229 (750) 297 (975) 373 (,225) 625 (2,000) 7 73,2 (20) 62 (530) 236 (775) 32 (,025) 387 (,270) 625 (2,050) 7 76,2 68 (550) 2 (800) 320 (,050) 625 (2,050) 6 79,2 (260) 7 (570) 25 (825) 335 (,00) 625 (2,050) 6 82,3 80 (580) 259 (850) 33 (,25) 625 (2,050) 6 85,3 (280) 86 (60) 27 (900) 358 (,75) 625 (2,050) 5 88, (290) 92 (630) 282 (925) 373 (,225) 625 (2,050) 5 9, (300) 98 (650) 290 (950) 38 (,250) 625 (2,050) 5 9,5 (30) 97,5 (320) 00,6 (330) 03,6 (30) 06,7 (350) 09,7 (360) 2,8 (370) 20 207 23 29 226 232 238 (660) (680) (700) (720) (70) (760) (780) 297 305 32 328 335 33 35 (975) (,000) (,025) (,075) (,00) (,25) (,50) Note: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Maximum hook travel for upper boom point application may be restricted when whip line length exceeds 357 m (,70') using 622 mm (2-/2") diameter lagging on left rear drum. Drums each provide 33 kn (30,000 lb) maximum single line pull.

performance data 8 Wire Rope engths uffing Jib No. 33A or No. 33 on No. with eavy-ift Top and uffing Jib ength uffing Jib Whip ine eft Rear Drum ( Part of Ine) m (ft) (7 Parts of Ine) m (ft) uffing Jib oist ine Right Rear Drum when equipped with Split Rear Drums Front Drum when equipped with Tandem Drums (6 Parts of Ine) (5 Parts of Ine) ( Parts of Ine) (3 Parts of Ine) (2 Parts of Ine) 5,7 (50) 0 (30) 389 (,275) 8,8 (60) 0 (360) 9 (,375) 5,8 (70) 6 (380) 3 (,25) 22 (00) 65 (,525) 0 (,325) (90) 28 (20) 88 (,600) 27 (,00) 366 (,200) 6,0 3 (0) 5 (,675) 50 (,75) 389 (,275) (20) 0 (60) 5 (,775) 72 (,550) 0 (,325) 67, (220) 6 (80) 88 (,600) 9 (,375) 358 (,75) 70, 52 (500) 5 (,675) 2 (,50) 373 (,225) 73,2 (20) 58 (520) 57 (,500) 389 (,275) 76,2 65 (50) 72 (,550) 396 (,300) 320 (,050) 79,3 (260) 7 (560) 95 (,625) (,350) 335 (,00) 82,3 77 (580) 5 (,675) 27 (,00) 33 (,25) 85,3 (280) 83 (600) 533 (,750) 2 (,50) 358 (,75) 88, (290) 89 (620) 57 (,500) 373 (,225) 9, (300) 95 (60) 72 (,550) 38 (,250) 9,5 (30) 20 (660) 88 (,600) 396 (,300) 97,5 (320) 207 (680 0 (,325) 00,6 (330) 23 (700) 9 (,375) 03,6 (30) 29 (720) 27 (,00) 06,7 (350) 226 (70) 2 (,50) 335 (,00) 09,7 (360) 232 (760) 50 (,75) 33 (,25) 2,8 (370) 238 (780) 35 (,50) 5,8 (380) 2 (800) 358 (,75) 8,9 (390) 250 (820) 366 (,200) 2,9 (00) 256 (80) Note: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Maximum hook travel for luffing jib application may be restricted when wire rope length exceeds m (,350') using left rear drum without lagging or when wire rope length exceeds 38 m (,250') using 622mm (2-/2") diameter lagging on left rear drum. Drums each provide 33 kn (30,000 lb) maximum single line pull. 373 (,225)

performance data Wire Rope engths - Fixed Jib No. 0 on uffing Jib No. 33A or 33 on No. with eavy-ift Top, uffing Jib, and Fixed Jib ength m FIxed Jib Whip ine eft Rear Drum ( Part of ine) (ft) (2 Parts of ine) m (ft) 9 5,8 (380) 2 (800) 358 (,75) 8,9 (390) 250 (820) 366 (,200) 2,9 (00) 256 (80) 38 (,250) 25,0 (0) 262 (860) 396 (,300) 28,0 (20) 268 (880) 0 (,325) 3, (30) 27 (900) (,350) 3, (0) 280 (920) 9 (,375) 37,2 (50) 287 (90) 27 (,00) 0,2 (60) 293 (960) 3,3 (70) 299 (980) 6,3 (80) 305 (,000) 9, (90) 3 (,020) 52, (500) 37 (,00) 55, (50) 323 (,060) 58,5 (520) 329 (,080) Note: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Drums each provide 33 kn (30,000 lb) maximum single line pull.

performance data 20 Wire Rope engths No. with ong-reach Top - or - Fixed Jib No. 32 on No. with ong-reach Top or and Fixed Jib ength ( Part of ine) m (ft) Whip ine eft Rear or Front Drum (2 Parts of ine) (3 Parts of ine) ( Parts of ine) m oist line Right Rear Drum Maximum Required Parts of (ft) ine (90) 3 (30) 9 (625) 88 (,600) 7 6,0 37 (50) 98 (650) 5 (,675) 7 (20) 3 (70) 206 (675) 533 (,750) 7 67, (220) 9 (90) 22 (725) 56 (,850) 7 70, 55 (50) 229 (750) 297 (975) 373 (,225) 587 (,925) 7 73,2 (20) 62 (530) 236 (775) 32 (,025) 389 (,275) 625 (2,050) 7 76,2 68 (550) 2 (800) 320 (,050) 0 (,325) 625 (2,050) 6 79,2 (260) 7 (570) 25 (825) 335 (,00) 625 (2,050) 6 82,3 80 (590) 259 (850) 33 (,25) 625 (2,050) 6 85,3 (280) 86 (60) 27 (900) 358 (,75) 625 (2,050) 5 88, (290) 92 (630) 282 (925) 373 (,225) 625 (2,050) 5 9, (300) 98 (650) 290 (950) 38 (,250) 625 (2,050) 9,5 (30) 20 (660) 297 (975) 396 (,300) 625 (2,050) 97,5 (320) 207 (680) 303 (,000) 0 (,325) 625 (2,050) 00,6 (330) 23 (700) 32 (,025) 625 (2,050) 03,6 (30) 29 (720) 328 (,075) 06,7 (350) 226 (70) 335 (,00) 09,7 (360) 232 (760) 33 (,25) 2,8 (370) 238 (780) 35 (,50) 5,8 (380) 2 (800) 358 (,75) 8,9 (390) 250 (820) 366 (,200) Note: ine lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of line times added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Maximum hook travel for upper boom point application may be restricted when whip line length exceeds 387 m (,270') using 622 mm (2-/2") diameter lagging on left rear drum. Drums each provide 33 kn (30,000 lb) maximum single line pull.

performance data Wire Rope Specifications 5: Safety Factor No. with eavy-ift or ong-reach Top - or - Fixed Jib No. 32 on No. with eavy-ift or ong-reach Top - or - uffing Jib No. 33A or 33 on No. with eavy-ift Top - or - Fixed Jib No. 0 on uffing Jib No. 33A or 33 on No. with eavy-ift Top 2 5: Safety Factor Rotation Resistant 960 N/mm 2 5: Safety Factor Rotation Resistant 770 N/mm 2 Only for helping reeve load lines: Regular ay 6 x 9 Filler Wire IPS, IWRC Function oist or Whip ine oist or Whip ine Rigging Winch ine Part Number No. 79375 No. 7937 No. 7909 Size Wire Rope (-/8") 29 mm (3/8") Minimum Breaking Strength 70 260 kg (00 lb) 70 70 kg (5,700 lb) 5 90 kg (3,00 lb) Maximum oad Per ine 3 60 kg (30,000 lb) 3 60 kg (30,000 lb) Approximate Weight,02 kg/m (2.70 lb/ft),25 kg/m (2.85 lb/ft) Drums & aggings - iftcrane Application Drum ocation Drum Part Number Unequal Split Rear Drums with Front Drum Optional Drum Type Drum Diameter Drum Width Grooved agging* (Optional) Part Number Wire Rope Size oist Right Rear 730 Bare 572 mm mm 502 with Spacer 9705 29 mm (22-/2") (-29/32") 50202 (-/8") Basic iftcrane Whip eft Rear 7305 Bare 572 mm 80 mm 5022 with Spacer 970 29 mm Whip (Optional) Front 730 with Spacer 76959 Bare (22-/2") 572 mm (22-/2") Note: Grooved laggings for 29 mm or (-/8") wire rope are optional for liftcrane application. *622 mm (2-/2") diameter. (8-29/32") 96 mm (37-53/6") 5020 with Spacer 92568 Pending Pending (-/8") 29 mm (-/8")

performance data 22 Drums & aggings - iftcrane Application Drum ocation Drum Part Number Tandem Drums - 85 mm (73") Wide (Optional) Drum Type Drum Diameter Drum Width Grooved agging* (Optional) Part Number Wire Rope Size Basic iftcrane oist Whip Rear Front 7352 with Spacer 7696 73520 with Spacer 7553 or 76960 Bare Bare 572 mm (22-/2") 572 mm (22-/2") Note: Grooved laggings for 29 mm or (-/8") wire rope are optional for liftcrane application. *622 mm (2-/2") diameter. mm (-29/32") 96 mm (37-53/6") Pending 50202 Pending Pending 29 mm (-/8") 29 mm (-/8") Drums & aggings - Clamshell / Bulk Material andling Unequal Split Rear Drums with Front Drum Optional Application Drum ocation Drum Part Number agging Type agging Diameter agging Width agging Part Number Wire Rope Size Closing* Right Rear 730 Grooved 622 mm mm 502358 29 mm (2-/2") (-29/32") 502358 (-/8") Clamshell olding eft Rear 7305 Grooved 622 mm (2-/2") 80 mm (8-29/32") 502356 502356 29 mm (-/8") Closing (Optional) Front 730 Grooved 622 mm (2-/2") 96 mm (37-53/6") 502375 with Spacer 76959 502375 with Spacer 76959 29 mm (-/8") Bulk Material andling olding Closing Right Rear Front 730 730 Grooved Grooved 622 mm (2-/2") 622 mm (2-/2") mm (-29/32") mm (-29/32") 502370 502370 (-/") (-/") *olding if used with front drum Drums & aggings - Container andling / Clamshell Equal Split Rear Drums with Front Drum Optional Application Drum ocation Drum Part Number agging Type agging Diameter agging Width agging Part Number Wire Rope Size Container andling Clamshell oist oist Auxiliary (Optional) Closing olding Right Rear eft Rear Front Right Rear eft Rear 7299 72920 730 with Spacer 76959 7299 72920 Grooved Grooved Bare Grooved Grooved 622 mm (2-/2") 622 mm (2-/2") 622 mm (2-/2") 622 mm 80 mm (3-29/32") 80 mm (3-29/32") 80 mm (3-29/32") 80 mm Pending 50236 Pending 50236 Pending 502365 Pending 29 mm (-/8") 29 mm (-/8") 29 mm (-/8") 29 mm (-/8") 29 mm (2-/2") (3-29/32") 502365 (-/8")

performance data Drums & aggings - Clamshell Tandem Drums - 85 mm (73") Wide (Optional) 23 Application Drum ocation Drum Part Number agging Type agging Diameter agging Width agging Part Number Wire Rope Size Clamshell olding Closing Rear Front 7352 with Spacer 7696 73520 with Spacer 7553 or 76960 Grooved Grooved 622 mm (2-/2") 622 mm (2-/2") mm (-29/32") 96 mm (37-53/6") 502358 502358 502375 502375 29 mm (-/8") 29 mm (-/8") Drum Capacities, Standard Drums - Wire Rope Right Rear Drum (oist) 29 mm Wire Rope* (-/8") Wire Rope* eft Rear Drum (Whip) 29 mm Wire Rope* (-/8") Wire Rope* Front Drum (Whip) 29 mm Wire Rope* (-/8") Wire Rope* Maximum ength No agging With agging** 730 m 8 ayers (2, ft) 8 ayers 355 m 9 ayers (,73 ft) 9 ayers 6 m 8 ayers (2,028 ft) 8 ayers 776 m 8 ayers (2,566 ft) 8 ayers 323 m 8 ayers (,068 ft) 8 ayers 653 m 8 ayers (2,58 ft) 8 ayers Working Weight Configuration 2,3 m (70') No. 76,2 m (250') No. Main with 36,6 m (20') No. 32 Fixed Jib 6,0 m (200') No. Main with 6,0 m (200') No. 33A uffing Jib kg (lb) Series Series 2 Series 3 203 069 (7,690) 29 80* (8,585)* 23 373** (50,090)** 28 85 (57,85) 265 776 (585,935) 277 803 (62,50) 293 8 (67,85) 3 35 (685,935) 323 62 (72,50) *6 m (20') is deducted from maximum spooling capacities for 3 dead wraps per drum or lagging. **agging diameter 622 mm (2-/2"). Typical working weight includes: optional self-assembly carbody jacks, hydraulic reservoirs full, fuel half-full, drums loaded with standard lengths of wire rope, upper boom point, 272 mt (300 t) hook block, and 3,6 mt (5 t) weight ball. Note: Upper boom point not used with fixed jib or luffing jib. Drums - 33, kn (30,000 lb) ayer ine Pull kn (lb) 0) (0) 02 (335) Single ine Pull/Single ine Speed* 2 (365) 3 20 (39) m/min (ft/min) 5 29 (2) 38 (53) 6 7 (83) 7 56 (52) 8 65 (52) *70, m (230') No. main boom and 36,6 m (20') fixed jib maximum allowed for Series. ** m (90') No. main boom and 6,0 m (200') luffing jib maximum allowed for Series. 22,2) (5,000),5) (0,000) 66,7) (5,000) 89,0) (20,000),2 (25,000) 33, (30,000) 02 (335) 00 (328) 97 (37) 9 (307) 90 (295) 80 (26) (365) 08 (355) 0 (32) 00 (329) 92 (303) 82 (269) 20 (39) 6 (38) 2 (366) 07 (35) 95 (3) 8 (277) 29 (2) 2 (08) 9 (390) 3 (370) 97 (39) 87 (286) NOTE: ine pull is infinitely variable. *Based on lagging diameter of 622 mm (2-/2"). 38 (53) 32 (33) 26 (3) 5 (378) 00 (327) 90 (29) 7 (8) 0 (59) 33 (36) 8 (386) 02 (336) 92 (302) 55 (509) 8 (8) 0 (58) 20 (39) 05 (3) 95 (30) 6 (537) 55 (509) 6 (80) 23 (02) 07 (352) 97 (38)

performance data 2 Maximum ength Unassisted Raising Method Over front, side or rear of crawlers m (ft) Fixed Jib No. 32 on No. with eavy-ift Top Series 3 Main 9, (300) 88, (290) 85,3 (280) 82,3 79,2 (260) 76,2 Fixed Jib 2, 36,6 (20) NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. Upper boom point cannot be used when jib is attached. lengths of 76,2 m (250') through 9, m (300') require only three middle sheaves in lower boom point, all others must be removed from lower boom point. Maximum ength Unassisted Raising Method Over front of crawlers m (ft) uffing Jib No. 33A or 33 on No. with eavy-ift Top Series 3 In-ine Procedure Main uffing Jib 2, 27, (90) 30,5 (00) 33,5 (0) 36,6 (20) 39,6 (30) 2,7 (0) 5,7 (50) 2,3-6,0 (70-200) 2,3-6,0 (70-200) 2,3-6,0 (70-200) 2,3 - (70-90) 2,3 - (70-80) 2,3-8,8 (70-60) 2,3-5,7 (70-50) 2,3-39,6 (70-30) Jack-Knife Procedure Main uffing Jib 33,5 (0) 36,6 (20) 39,6 (30) 2,7 (0) 5,7 (50) 8,8 (60) 5,8 (70) ayout 6,0-6,0 (90-200) 5,8-6,0 (70-200) 8,8-6,0 (60-200) 2,7-6,0 (0-200) 36,6-6,0 (20-200) 30,5-6,0 (00-200) 2, - 6,0 (80-200) Maximum ength Unassisted Raising Method Over front, side or rear of crawlers m (ft) Fixed Jib No. 32 on No. with ong-reach Top Series 3 Main 00,6 (330) 97,5 (320) 9,5 (30) 9, (300) 88, (290) 85,3 (280) 82,3 Fixed Jib 8,3 (60) 36,6 (20) NOTE: oad block(s), hook(s) and weight ball(s) on ground at start. Upper boom point cannot be used on 00,6 m (330') boom, or when jib is attached. 8,8 (60) 5,8 (70) 2,3-33,5 (70-0) 2,3-27, (70-90) 2,3 (70) (90) 6,0* * * (20) * 2,3-6,0 (70-200) 2,3-6,0 (70-200) 33,5-5,7 (0-50) NOTE: oad block(s), hook(s) and weight ball(s) on ground until boom and luffing jib are erected. *Requires only middle three sheaves to be used in lower boom point, all others must be removed from lower boom point. Combinations of boom and luffing jib to 76,2 m (250') and 6,0 m (200') can be raised over front of blocked crawlers with outside assist. Maximum ength Unassisted Raising Method Over front of blocked crawlers m (ft) Fixed Jib No. 0 set at 5 0 angle on uffing Jib No. 33 or 33A on No. with eavy-ift Top Series 3 ayout Jack-Knife Procedure Main (90) 6,0* * uffing Jib 8,8-6,0 (60-200) 8,8-6,0 (60-200) 8,8-6,0 (60-200) Fixed Jib 2,2-36,6 (0-20) 2,2-36,6 (0-20) 2,2-36,6 (0-20) NOTE: oad block(s), hook(s) and weight ball(s) on ground until boom and luffing jib are erected. *Requires only middle three sheaves to be used in lower boom point, all others must be removed from lower boom point.

boom combinations No. Main with eavy-ift Top Combinations ength 2, 27, (90) 30,5 (00) 33,5 (0) 36,6 (20) 39,6 (30) 2,7 (0) 5,7 (50) 8,8 (60) 5,8 (70) (90) 6,0 (20) 67, (220) 70, 73,2 (20) 76,2 79,2 (260) 82,3 85,3 (280) 88,3 (290) 9, (300) Inserts 6, m (20 ft) 3,0 m (0 ft) *ight weight inserts. Note: Intermediate suspension required for 85,3 m (280') and longer boom lengths. 2,2 m (0 ft) 2 2 2 2 3 3 3 3 5 2,2 m* (0 ft)* No. 32 Fixed Jib Combinations Jib ength 2,2 (0) 8,3 (60) 2, 30,5 (00) 36,6 (20) Fixed Jib Inserts 6, m (20 ft) 2 3 9, m (30 ft) No. eavy-ift Top 2,2 m (0 ft) No. ight Weight Insert 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert No. 32 Fixed Jib 36,6 m (20 ft) 6, m (20 ft) No. 32 Jib Insert 6, m (20 ft) No. 32 Jib Butt 9, m (30 ft) No. eavy-ift Top 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert 25 6, m (20 ft) No. 32 Jib Top 6, m (20 ft) No. 32 Jib Insert 6, m (20 ft) No. 32 Jib Insert 6, m (20 ft) No. 32 Jib Insert No. with eavy-ift Top 9, m (300 ft) 2,2 m (0 ft) No. Insert No. with eavy-ift Top 76,2 m (250 ft) 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert 6, m (20 ft) No. Insert 3,0 m (0 ft) No. Insert 2,2 m (0 ft) No. Butt 2,2 m (0 ft) No. Insert 6, m (20 ft) No. Insert 2,2 m (0 ft) No. Butt Model 2250 Series 3 No. Main with eavy-ift Top 9, m (300 ft) Model 2250 Series 3 No. 32 Fixed Jib on No. Main with eavy-ift Top 2,8 m (370 ft)

boom combinations 26 No. ong-reach Main Combinations ength (90) 6,0 (20) 67, (220) 70, 73,2 (20) Inserts 6, m (20 ft) 3,0 m (0 ft) 2,2 m (0 ft) 2 2 2 2 3 3 2,2 m* (0 ft)* No. 32 Fixed Jib Combinations Jib ength 2,2 (0) 8,3 (60) 2, 30,5 (00) 36,6 (20) Fixed Jib Inserts 6, m (20 ft) 2 3 6, m (20 ft) No. 32 Jib Top 6, m (20 ft) No. 32 Jib Insert 76,2 79,2 (260) 3 3 6, m (20 ft) No. 32 Jib Insert 82,3 85,3 (280) 88, (290) 9, (300) 9, (30) 3 2,2 m (0 ft) No. ong-reach Top No. 32 Fixed Jib 36,6 m (20 ft) 6, m (20 ft) No. 32 Jib Insert 6, m (20 ft) No. 32 Jib Insert 97,5 (320) 00,6 (330) *ight weight inserts. Note: Intermediate suspension required for 9, m (300') and longer boom lengths. 9, m (30 ft) No. Transition Insert 2,2 m (0 ft) No. ight Weight Insert 6, m (20 ft) No. 32 Jib Butt 2,2 m (0 ft) No. ong-reach Top No. with ong-reach Top 00,6 m (330 ft) 2,2 m (0 ft) No. Insert 9, m (30 ft) No. Transition Insert 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert No. with ong-reach Top 82,3 m (270 ft) 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert 6, m (20 ft) No. Insert 2,2 m (0 ft) No. Butt 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Butt Model 2250 Series 3 No. Main with ong-reach Top 00,6 m (330 ft) Model 2250 Series 3 No. 32 Fixed Jib on No. Main with ong-reach Top 8,9 m (390 ft)

No. 33A or 33 uffing JIb Combinations uffing Jib ength 2,3 (70) 2, 27, (90) 30,5 (00) 33,5 (0) 36,6 (20) 39,6 (30) 2,7 (0) 5,7 (50) 8,8 (60) 5,8 (70) (90) 6,0 uffing Jib Inserts 3,0 m 6, m 2,2 m (0 ft) (20 ft) (0 ft) 2 2 2 2 3 3 boom combinations 2,2 m (0 ft) No. 33A Jib Top 2,2 m (0 ft) No. 33A Jib Insert 2,2 m (0 ft) No. 33A Jib Insert No. 0 Fixed Jib Combinations Jib ength 2,2 (0) 8,3 (60) 2, 30,5 (00) 36,6 (20) Fixed Jib Inserts 6, m (20 ft) 2 3 No. 0 Fixed Jib 36,6 m (20 ft) 6, m (20 ft) No. 0 Jib Butt 2,2 m (0 ft) No. 33A Jib Top 2,2 m (0 ft) No. 33A Jib Insert 2,2 m (0 ft) No. 33A Jib Insert 6, m (20 ft) No. 0 Jib Top 6, m (20 ft) No. 0 Jib Insert 6, m (20 ft) No. 0 Jib Insert 6, m (20 ft) No. 0 Jib Insert 6, m (20 ft) No. 0 Jib Insert 27 2,2 m (0 ft) No. 33A Jib Insert 2,2 m (0 ft) No. 33A Jib Insert No. 33A uffing Jib 6,0 m (200 ft) 3,0 m (0 ft) No. 33A Jib Insert No. 33A uffing Jib 6,0 m (200 ft) 3,0 m (0 ft) No. 33A Jib Insert 9, m (30 ft) No. 33A Jib Butt 9, m (30 ft) No. 33A Jib Butt 9, m (30 ft) No. eavy-ift Top 9, m (30 ft) No. eavy-ift Top No. with eavy-ift Top 6,0 m (200 ft) 2,2 m (0 ft) No. Insert No. with eavy-ift Top 6,0 m (200 ft) 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert 2,2 m (0 ft) No. Insert 3,0 m (0 ft) No. Insert 2,2 m (0 ft) No. Butt 2,2 m (0 ft) No. Insert 3,0 m (0 ft) No. Insert 2,2 m (0 ft) No. Butt Model 2250 Series 3 No. 33A or No. 33 uffing Jib on No. Main with eavy-ift Top 2,9 m (00 ft) Model 2250 Series 3 No. 0 Fixed Jib on No. 33A or No. 33 uffing Jib on No. Main with eavy-ift Top 58,5 m (520 ft)

heavy-lift boom range diagram No. eavy-ift 28 (330) 00,6 (320) 97,5 83 (30) 9,5 80 (300) 9, 70 (290) 88, 9, (300) (280) 85,3 82,3 85,3 (280) 88, (290) 60 (260) 79,2 82,3 76,2 79,2 (260) (20) 73,2 76,2 50 70, (220) 67, 70, 73,2 (20) 67, (220) (20) EIGT ABOVE GROUND 6,0 (90) (70) 5,8 (60) 8,8 8,8 (60) 5,8 (70) (90) 6,0 (20) 0 30 (50) 5,7 5,7 (50) (0) 2,7 2,7 (0) (30) 39,6 39,6 (30) (20) 36,6 36,6 (20) (0) 33,5 33,5 (0) (00) 30,5 30,5 (00) (90) 27, 27, (90) 2, 2, (70) 2,3 2,3 (70) (60) 8,3 (50) 5,2 (0) 2,2 (30) 9, 7,25 m (23' 0") TAISWING,98 m (6' 6") ROTATION 2, m (8' 0") 9, (30) 2,2 (0) 5,2 (50) 8,3 (60) 2,3 (70) 27. 2, 27, (90) 30,5 (00) 33,5 (0) 36,6 (20) 39,6 (30) 2,7 (0) 5,7 (50) 8,8 (60) DISTANCE FROM CENTERINE OF ROTATION 5,8 (70) (90) 6,0 (20) 67, (220) 70, 73,2 (20) 76,2 79,2 (260)

heavy-lift load charts iftcrane Capacities - 2250 Series 3 No. with eavy ift Top 3 00 kg (29,200 lb) Crane Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 29 5,5 (8) 7,0 (22) 8,0 (26) 9,0 (30),0 (36) 2,0 (0),0 (6) 5,0 (50) 2,3 (70) 272, (600.0) 239,3 (5.5) 20,8 (69.) 88,2 (08.7) 5, (30.9) 35,9 (293.0) 09,0 (239.8) 98,6 (22.6) 27, (90) 223, (95.6) 20, (68.) 87,8 (07.7) 5,2 (30.9) 0,7 (30.2) 3,0 (28.7) 02,5 (22.2) 33,5 (0) 69,8 66,2 (367.0) 62,9 (358.2) 53,8 (339.8) 0, (303.9) 2,8 (28.3) 02,3 (220.8) 39,6 (30) 58,8 (350.7) 55,9 (33.0) 50,9 (333.2) 38,0 (298.3) 2,6 (27.9) 02,2 (220.) 5,7 (50) 35,8 (298.6) 30,7 (288.3) 28, (282.3) 0,9 (2.2) 0,9 (29.6) 5,8 (70) (28.) 2,9 (275.6) 23, (270.7) 07, (236.) 99, (2.7) (90) 08,2 (238.8) 06,5 (23.2) 03, (227.2) 96, (207.8) 67, (220) 97,7 (2.8) 90,8 (200.2) 87,5 (9.2) 73,2 (20) (85.8) 80,9 (78.) 78,3 (7.3) 79,2 (260) 73,8 (62.8) 7,5 (56.5) 85,3 (280) 6, (2.0) 63, (38.6) 9, (300) 55,9 (23.3) 55,6 (22.6) Fixed Jib No. 32 on No. Jib ength 2,2 (0) 8,3 (60) 2, 30,5 (00) 36,6 (20) Deduct from Capacity when fixed jib is attached kg (lb) 2 900 (6,00) 3 720 (8,200) 670 (0,300) 5 80 (2,800) 6 90 (5,300) 8,0 (60) 22,0 (70) 2,0 7,7 (60.) (0.2) 79,8 (72.) 59, (37.) 5,6 (0.7) 79,5 (7.8) 60,7 (39.5) 5,0 (6.6) 79, (7.) 60, (39.0) 53,8 (6.) 78,9 (70.5) 60,0 (38.) 53,3 (5.) 78,8 (69.8) 59,7 (37.) 53,0 (.5) 77,7 (68.3) 59,2 (36.) 52,5 (3.) 7, (60.5) 58, (33.8) 5,9 (2.0) 70,5 (53.9) 56,5 (29.5) 50,9 (0.2) 6, (0.7) 55, (25.9) 50, (08.3) 58,5 (29.) 55,0 (25.0) 8,9 (05.8) 53,0 (6.0) 8, (08.3) 6, (0.7) 28,0 (90) 2,8 (97.6) 3,6 (99.0) 3,2 (98.0) 2,8 (97.3) 2,3 (96.2),7 (9.8),2 (93.7),3 (93.6) 0,2 (9.) 38,8 (88.0) 30,0 (00) 37,8 (80.9) 39,6 (85.6) 39,2 (8.7) 38,9 (8.0) 38, (82.9) 37,8 (8.5) 37,2 (80.3) 37,3 (80.5) 36,7 (79.5) 35, (76.6) 3,0 (0) 32, (72.7) 32,9 (7.) 32,6 (73.) 32, (72.3) 3, (70.8) 30,9 (69.6) 30,9 (69.8) 30,7 (69.2) 29,8 (67.2) 36,0 (20) 28,7 (6.) 29,9 (6.) 30,0 (6.7) 29,5 (63.6) 28,8 (62.) 28,3 (60.9) 28, (6.) 28, (60.5) 27,5 (59.) 2,0 (0) 2,9 (6.3) 22,9 (9.) 23,2 (9.5) 22,6 (8.8) 22, (7.6) 22,2 (7.8) 2,9 (7.) 2,3 (5.) 50,0 (60) (35.5) 5,8 (37.) 6,0 (37.) 5,8 (37.0) 6,3 (38.0) 5,2 (35.8) 3,9 (32.8) 56,0,8 (27.8),7 (27.) 2,2 (28.6),2 (26.) 9,8 (23.3) 62,0 8,5 (20.0) 8, (9.7) 8,9 (2.0) 8, (9.0) 6,8 (6.) 68,0 (220) 72,0 (235) 7,0 (25) 76,0 (255) 5,6 (3.3) 6,2 (.7),7 (0.8) 5,5 (3.0),0 (9.2) 3,3 (6.9) 2,6 (.7),3 (0.) 3,0 (7.0) 2, (5.0),9 Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

long-reach boom range diagram 30 (350) 06,7 (30) 03,6 No. ong-reach 83 80 (330) 00,6 (320) 97,5 00,6 (330) 70 (30) 9,5 97,5 (320) (300) 9, 9,5 (30) 60 (290) 88, 9, (300) (280) 85,3 88, (290) 82,3 (260) 79,2 82,3 85,3 (280) 50 76,2 79,2 (260) (20) 73,2 76,2 EIGT ABOVE GROUND 70, (220) 67, (20) 6,0 (90) (70) 5,8 (60) 8,8 (90) 6,0 (20) 67, (220) 70, 73,2 (20) 0 30 (50) 5,7 (0) 2,7 (30) 39,6 (20) 36,6 (0) 33,5 (00) 30,5 (90) 27, 2, (70) 2,3 (60) 8,3 (50) 5,2 (0) 2,2 (30) 9, 7,25 m (23' 0") TAISWING,98 m (6' 6") ROTATION 2, m (8' 0") 9, (30) 2,2 (0) 5,2 (50) 8,3 (60) 2,3 (70) 2, 27, (90) 30,5 (00) 33,5 (0) 36,6 (20) 39,6 (30) 2,7 (0) 5,7 (50) 8,8 (60) 5,8 (70) DISTANCE FROM CENTERINE OF ROTATION (90) 6,0 (20) 67, (220) 70, 73,2 (20) 76,2 79,2 (260) 82,3 85,3 (280)

long-reach load charts iftcrane Capacities - 2250 Series 3 No. with ong Reach Top 3 00 kg (29,200 lb) Crane Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 3 (90) 6,0 (20) 70, 73,2 (20) 76,2 82,3 85,3 (280) 88, (290) 9,5 (30) 97,5 (320) 00,6 (330) 9,8 (32) 95,2 (20.0) 95,2 (20.0),0 (36) 2,0 (0),0 (6) 5,0 (50) 8,0 (60) 95,2 (20.0) 95,2 (20.0) 95,2 (20.0) 95,2 (20.0) 80,6 (73.2) 95,2 (20.0) 95,2 (20.0) 95,2 (20.0) 95,2 (20.0) 80, (72.7) 95,2 (20.0) 95,2 (20.0) 95,2 (20.0) 9,0 (205.7) 79,5 (7.9) 89,0 (96.3) 87,5 (92.) 8,8 (87.0) 83,6 (83.8) 76,8 (66.3) 8,7 (86.3) 82,3 (8.) 8, (78.0) 7,8 (63.6) (78.8) 79,0 (7.3) 77,7 (70.) 7,5 (56.) 69,3 (52.9) 68,5 (50.6) 63,5 (39.0) 6,2 (.6) 63,7 (0.2) 60,3 (3.7) 59,8 (3.9) 59,3 (30.6) 57, (25.0) 8,9 (08.0) 8,3 (05.9),6 (97.8),7 (98.), (90.5),2 (90.2) 37,6 (82.) Fixed Jib No. 32 on No. Jib ength 2,2 (0) 8,3 (60) Deduct from Capacity when fixed jib is attached kg (lb) 2 900 (6,00) 3 720 (8,200) 22,0 (70) 2,0 6,3 (0.9) 5,6 (8.0) 6,0 (0.3) 5,3 (7.) 60,9 (0.) 5,2 (7.) 60,5 (39.0) 53,7 (6.) 59,9 (37.0) 53,5 (5.5) 59,3 (35.7) 53,3 (5.) 56,6 (27.6) 5,9 (2.) 53,6 (20.7) 50,5 (0.2) 50,9 (.5) 7,9 (0.5) 0,7 (9.2) 39, (85.6) 37,3 (83.6) 35,6 (77.9) 33,9 (76.) 32,3 (70.8) 2, 30,5 (00) 36,6 (20) 670 (0,300) 5 80 (2,800) 6 90 (5,300) 30,0 (00) 0,6 (87.6) 0,3 (87.0) 0,2 (86.8) 39,7 (85.7) 39, (85.0) 39,2 (8.7) 38,7 (83.5) 38, (82.9) 38,2 (82.5) 3,9 (76.5) 3, (68.6) 28, (62.2) 36,0 (20) 3,7 (68.) 3, (67.8) 3,3 (67.6) 30,7 (66.) 30,5 (65.8) 30,3 (65.5) 29,8 (6.3) 29,5 (63.6) 29,3 (63.3) 28,3 (6.2) 27,7 (59.9) 25, (55.5) 0,0 (30) 27, (6.3) 27, (60.6) 27,0 (60.) 26, (59.2) 26,2 (58.6) 26,0 (58.3) 25,5 (57.) 25,2 (56.) 25,0 (56.0) 2,5 (5.8) 23,9 (53.5) 23, (52.) 2,0 (0) 25,6 (55.2) 25,3 (5.6) 25, (5.3) 2,6 (53.2) 2,3 (52.5) 2,2 (52.2) 23,6 (5.0) 23, (50.3) 23,2 (9.9) 22,7 (8.9) 22,3 (8.0) 22,2 (8.) 50,0 (60) 8,8 (3.7) 8,8 (3.7) 9,0 (.2) 8,9 (3.) 8,6 (2.8) 8,5 (2.5) 7,9 (.2) 7,6 (0.6) 7, (0.2) 6,6 (38.8) 6, (37.8) 6, (38.) 52,0 (70) 7,3 (38.6) 7,3 (38.6) 7,6 (39.) 7, (38.8) 7,3 (38.5) 7,3 (38.5) 6,8 (37.3) 6, (36.6) 6,3 (36.3) 5, (33.7),7 (32.7) 5,0 (33.) 56,0 (85),6 (3.8),9 (32.5),8 (32.3),7 (32.0),8 (32.), (3.),3 (3.0),2 (30.8) 2,6 (27.3) 2, (26.3) 2, (26.9) 60,0 (95) (28.) 2,6 (28.5) 2, (28.2) 2,5 (28.3) 2,2 (27.6) 2,0 (27.2),9 (27.0) 0, (23.6) 9,9 (22.6) 0,2 (23.2) 62,0 (205),5 (25.0), (2.7),5 (2.9), (2.2) 0,9 (23.7) 0,9 (23.6) 9, (20.3) 8,9 (9.3) 9,2 (9.9) 66,0 (25) (2.) 9,5 (2.6) 9,6 (2.8) 9,3 (2.) 9, (20.6) 9,0 (20.5) 7,6 (7.3) 7, (6.3) 7, (6.9) 72,0 (20) 6,9 (.) 6,7 (.0) 6,6 (3.7) 5,3 (0.9),9 (0.0) 5,2 (0.6) 76,0 78,0 (265) 80,0 82,0 (275) 5,5 (2.0) 5,2 (.),3,9 (0.7),0 (6.3) 3,2,0 (8.7) 3,3 (5.7) 2,7 (.7) 2,2 3,6 (7.8) 3,0 (.9) 2, (.0),8 3,8 (8.) 3,2 (5.5) 2,7 (.6) 2, Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

fixed jib range diagram 32 (370) 2,8 (360) 09,7 (350) 06,7 No. 32 Fixed Jib on No. eavy-ift (380) 5,8 5 80.7 36,6 (20) 5 09,7 (360) 2,8 (370) 70 (30) 03,6 30,5 (00) 06,7 (350) 60 (330) 00,6 03,6 (30) (320) 97,5 30 00,6 (330) (30) 9,5 2, 97,5 (320) (300) 9, 9,5 (30) 50 (290) 88, 8,3 (60) 9, (300) (280) 85,3 2,2 (0) 88, (290) 82,3 85,3 (280) (260) 79,2 82,3 76,2 79,2 (260) 0 (20) 73,2 70, 73,2 (20) 76,2 EIGT ABOVE GROUND (220) 67, (20) 6,0 (90) (70) 5,8 (60) 8,8 8,8 (60) 5,8 (70) (90) 6,0 (20) 67, (220) 70, 30 (50) 5,7 5,7 (50) (0) 2,7 2,7 (0) (30) 39,6 39,6 (30) (20) 36,6 (0) 33,5 (00) 30,5 (90) 27, 2, 27.9 (70) 2,3 (60) 8,3 (50) 5,2 (0) 2,2 (30) 9, 7,25 m (23' 0") TAISWING,98 m (6' 6") 2, m ROTATION (8' 0") 9, (30) 2,2 (0) 5,2 (50) 8,3 (60) 2,3 (70) 2, 27, 30,5 33,5 36,6 39,6 2,7 (90) (00) (0) (20) (30) (0) 5,7 8,8 5,8 6,0 (50) (60) (70) (90) DISTANCE FROM CENTERINE OF ROTATION 67, 70, 73,2 (20) (220) (20) 76,2 79,2 82,3 85,3 (260) (280) 88, 9, 9,5 97,5 (290) (300) (30) (320)

fixed jib load charts Jib ength 2,2 m (0 ft) iftcrane Jib Capacities - 2250 Series 3 Jib No. 32 with 6 096 mm (20 ft) Strut on No. with eavy-ift Top 3 00 kg (29,200 lb) Crane Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 5 Offset 30 Offset 2,2 (0),0 (5) 8,0 (60) 2,0 30,0 (0) 0,0 (0) 52,0 (70) 60,0 68,0 76,0 39,6 (30) 5,3 (00.0) 2,3 (9.2) 37,6 (82.3) 32, (7.0) 28,7 (59.6) 2,5 (52.) 8,8 (60),5 (99.0) 0,0 (87.6) 3,8 (76.2) 3,0 (6.5) 26, (53.2) 6,5 (36.7) (90),9 (92.0) 36,9 (80.8) 33, (68.9) 25,8 (5.5) 6, (36.6),5 (2.3) 70, 0,8 (90.0) 39,3 (86.) 35,5 (7.) 2,7 (9.2) 5,8 (35.3) 0,9 (23.2) 7,2 (.), (9.) 79,2 (260) (90.0) 0,6 (89.5) 36,9 (70.6) 2,3 (8.) 5,5 (3.5),0 (23.2) 7,2 (.2),2 (9.3) 39,6 (30) 25,3 (55.5) 22,3 (8.8) 20,0 (.9) 7,5 (37.7) 8,8 (60) (57.) 23, (5.3) 2,2 (.5) 8,6 (39.9) (90) 2,3 (53.3) 22,2 (6.7) 9,6 (2.) 7, (38.7) 70, 25,3 (55.5) 23,3 (9.2) 20,7 (.6) 6,5 (36.7),9 (25.2) 79,2 (260) 25,8 (56.8) 2,0 (50.8) 2,5 (6.3) 6,2 (36.) 2, (25.5) 8,0 (5.7) 33 80,0 3,0 (5.2) 39,6 (30) 8,8 (60) (90) 70, 79,2 (260) 39,6 (30) 8,8 (60) (90) 70, 79,2 (260) 5,2 (50) 32,8 (72.) 6,0 (55) 32,5 (70.9) (72.5) 20,0 (70) 30,8 (66.8) 3,6 (68.7) 32,3 (70.3) 33,0 (7.9) (60.0) (.8) Jib ength 8,3 m (60 ft) 28,0 (90) 36,0 (20),0 (50) 56,0 (20) 72,0 (20) 80,0 (260) 8,0 (280) 28,0 (62.2) 25,9 (56.9) 22,7 (8.) (33.8) 29,0 (6.) 26,9 (59.2) 23,6 (9.2) 5,3 (35.) 29,8 (66.2) 27,8 (6.2) 22,9 (7.6) 5, (35.0) 0,7 (23.7) 30,7 (68.2) 28,9 (63.) 2,8 (5.3), (33.) 0, (22.3) 6,7 (3.9) 3,9 (9.3) 27,2 (60.0) 27,2 (60.0) 2, (.5),0 (32.2) 0,0 (22.2) 6,6 (3.8) 3,9 (9.2) 2,7 (5.3) 6,5 (36.8), (3.6) 3,0 (28.) 7,2 (38.5) 5,2 (33.) 3,7 (29.8) 7,9 (39.9) 5,9 (35.0),5 (3.) 2,9 (28.8) 8,6 (.) 6,7 (36.8) 5,3 (33.2) 3,6 (30.5),2 (2.9) 9,0 (2.) 7,2 (37.9) 5,8 (3.),2 (3.7),3 (25.) 7,6 (5.8) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

fixed jib load charts 3 Jib ength 30,5 m (00 ft) iftcrane Jib Capacities - 2250 Series 3 Jib No. 32 with 6 096 mm (20 ft) Strut on No. with eavy-ift Top 3 00 kg (29,200 lb) Crane Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 5 Offset 30 Offset 8,3 (60) 20,0 (70) 2,0 30,0 (00) 0,0 (30) 52,0 (60) 60,0 (90) 68,0 (220) 76,0 39,6 (30) 8,3 (0.5) 7,9 (38.8) 6,9 (37.3) 5,7 (3.) 3,6 (30.3),6 (26.8) 0,6 (2.0) 8,8 (60) 8,3 (39.7) 7, (38.3) 6,2 (35.7), (32.0) 2, (28.6), (25.8) 0,5 (23.5) (90) (0.5) 7,8 (39.2) 6,7 (36.8) 5,0 (33.) 3,2 (30.2) 2, (27.) 0,7 (2.5) 7,6 (6.7) 70, (220) 8, (39.9) 7, (37.6) 5,6 (3.6) 3,8 (3.6) 2,8 (28.8) 0, (23.2) 7,0 (5.) 76,2 (0.6) 7, (38.) 6,0 (35.5), (32.8) 3,2 (30.) 9,9 (22.8) 6,8 (5.0) 39,6 (30),9 (26.) 9,9 (22.) 8,3 (9.3) (7.2) 8,8 (60) (26.8) 0, (23.2) 8,8 (20.) 8, (8.3) (6.8) (90) 0,8 (2.) 9,3 (2.) 8,5 (9.3) 7,9 (7.7) 70, (220),2 (2.9) 9,7 (22.2) 8,9 (20.2) 8,3 (8.5) 7,8 (7.2) 76,2,5 (25.6) 0,0 (23.0) 9,2 (20.9) 8,6 (9.3) 8, (8.0) 8,0 (280),5 (9.2),3 (8.9) 5,6 (.6) 92,0 (300) 2,3 (5.) 39,6 (30) 8,8 (60) (90) 70, (220) 76,2 39,6 (30) 8,8 (60) (90) 70, (220) 76,2 8,3 (60),8 (32.8) 20,0 (70),5 (3.2),8 (32.) (32.8) Jib ength 36,6 m (20 ft) 2,0 30,0 (00) 0,0 (30) 52,0 (60) 60,0 (90) 68,0 (220) 76,0 8,0 (280) 92,0 (30) 3,5 (29.6) 2, (26.6) 0, (22.5) 8, (9.0) 7, (6.3) 6,2 (.),0 (30.7) 2,7 (27.9) 0,8 (2.0) 8,9 (20.7) 7,8 (7.9) 6,9 (5.6) 6,2 (3.8),3 (3.5) 3,2 (28.9), (25.3) 9,5 (22.) 8,5 (9.) 7,6 (7.) 6,8 (5.) 5,7 (.7),7 (32.3) 3,6 (29.9),9 (26.) 0, (23.) 9, (20.7) 8,2 (8.) 7, (6.) 5,0 (0.) 2,9 (5.3) (32.8) 3,9 (30.6) 2,3 (27.) 0,6 (2.5) 9,6 (2.9) 8,8 (9.6) 7,2 (5.9),8 (9.8) 2,7 (.9) 7, (6.6) 6,3 (.5) 5,7 (3.0) (2.0) 7,7 (7.2) 6,6 (5.2) 6,0 (3.7) 5,6 (2.5) 7,9 (7.6) 6,9 (5.8) 6,3 (.3) 5,9 (3.) 5,5 (2.2) 8, (8.0) 7, (6.3) 6,6 (.9) 6, (3.7) 5,7 (2.7) 5, (2.) 8,3 (8.) 7,3 (6.8) 6,8 (5.) 6,3 (.2) 6,0 (3.2) 5,7 (2.5), Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

fixed jib range diagram No. 32 Fixed Jib on No. ong-reach (00) 2,9 8.3 5 (390) 8,9 35 (380) 5,8 (370) 2,8 5 8,9 (390) 70 30,5 (00) 5,8 (380) (360) 09,7 (350) 06,7 (30) 03,6 30 2, 06,7 (350) 09,7 (360) 2,8 (370) 60 (330) 00,6 30 03,6 (30) (320) 97,5 8,3 (60) 00,6 (330) (30) 9,5 97,5 (320) 50 (300) 9, 2,2 (0) 9,5 (30) (290) 88, 9, (300) (280) 85,3 88, (290) 82,3 85,3 (280) (260) 79,2 82,3 0 76,2 79,2 (260) EIGT ABOVE GROUND (20) 73,2 70, (220) 67, (20) 6,0 6,0 (20) 67, (220) 70, 73,2 (20) 76,2 30 (90) (90) (70) 5,8 (60) 8,8 (50) 5,7 (0) 2,7 (30) 39,6 (20) 36,6 (0) 33,5 (00) 30,5 (90) 27, 2, (70) 2,3 (60) 8,3 (50) 5,2 (0) 2,2 (30) 9, 7,25m (23' 0") TAISWING,98m (6' 6") 2,m ROTATION (8' 0") 9, (30) 2,2 (0) 5,2 (50) 8,3 (60) 2,3 (70) 2, 27, 30,5 33,5 36,6 39,6 2,7 5,7 8,8 5,8 6,0 67, 70, 73,2 (90) (00) (0) (20) (30) (0) (50) (60) (70) (90) (20) (220) (20) DISTANCE FROM CENTERINE OF ROTATION 76,2 79,2 82,3 85,3 88, 9, 9,5 97,5 (260) (280) (290) (300) (30) (320) 00,6 03,6 (330) (30)

fixed jib load charts 36 Jib ength 2,2 m (0 ft) iftcrane Jib Capacities - 2250 Series 3 Jib No. 32 with 6 096 mm (20 ft) Strut on No. with ong-reach Top 3 00 kg (29,200 lb) Crane Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 5 Offset 30 Offset 3,7 (5) 6,0 (55) 22,0 (70) 30,0 (00) 0,0 (30) 8,0 (60) 56,0 (90) 68,0 (220) 76,0 (90) 5,3 (00.0) 3,7 (9.5) 38, (85.3) 32,8 (7.9) 27, (6.3) 2,0 (5.) 6,2 (33.3) (20),6 (96.9) 39,3 (87.9) 3, (7.6) 26,9 (60.3) 20,6 (.) 6, (33.) 0, (23.2) 70, (90.0) 0,3 (90.0) 35,2 (77.) 26, (59.) 20,0 (3.2) 5,6 (32.) 9,8 (22.5) 6,7 (.8) 79,2 (260) 0,8 (90.0) 36,7 (80.5) 25,6 (57.) 9,3 (.5),8 (30.9) 9,3 (2.) 6,3 (3.9) 85,3 (280) 37, (82.3) 35,3 (77.8) 25, (56.2) 8,7 (0.2),2 (29.6) 8,8 (20.3) 5,8 (2.8) (90) 25,2 (56.) 22, (8.5) 9,3 (2.9) 7,7 (38.9) 6,6 (20) 25,5 (56.7) 22,7 (9.9) 20,0 (.3) 8, (0.3) 6,5 (3.5) 70, 25,8 (57.2) 23,3 (5.) 20,6 (5.7) 8,9 (.5) 6,0 (33.) 79,2 (260) 2, (52.9) 2, (7.5) 9,7 (3.0) 5,3 (3.9) 0,0 (23.0) 85,3 (280) 2,6 (53.9) 2,9 (8.6) 9,5 (.9),8 (30.8) 9,5 (22.) 6, (.) 8,0 3,9 (9.7) 3, (8.8) 88,0 (290) 2, (5.) (90) (20) 70, 79,2 (260) 85,3 (280) (90) (20) 70, 79,2 (260) 85,3 (280) 6,8 (55) 33,3 (73.5) 20,0 (65) 32, (7.) 32,5 (72.0) 32,9 (72.7) Jib ength 8,3 m (60 ft) 2,0 3,0 (0),0 (0) 52,0 (70) 60,0 72,0 80,0 (260) 88,0 (290) 92,0 (300) 30,9 (67.9) 28,2 (62.5) 2,3 (55.7) 9,0 (2.3) 5,0 (32.0) (22.7) 3,3 (68.9) 28,7 (63.7) 23,9 (55.) 8,6 (.3),7 (3.6) 9, (22.5) 3,7 (69.7) 28,0 (62.) 23, (5.0) 8,0 (0.),2 (30.6) 9, (2.7) 6,3 (.6) 32,2 (70.8) 27, (6.0) 22,6 (52.) 7,3 (38.5) 3,5 (28.9) 8,5 (20.5) 5,8 (3.5) 3,6 (7.8) 27,2 (60.0) 26,7 (59.) 22, (5.2) 6,8 (37.3) 2,9 (27.7) 8,0 (9.) 5,3 (2.) 3, (6.8) 2, (5.) (39.9) 5,6 (3.7) 3,8 (30.9) 2,7 (28.2) (0.6) 6,0 (35.6),2 (3.8) 3, (29.0) 2,3 (27.0) 6,3 (36.3),6 (32.7) 3,5 (29.9) 2,6 (27.7) 6,8 (37.) 5, (33.8),0 (3.0) 3, (28.8) 9, (22.5) 7, (38.0) 5, (3.5),3 (3.7) 3, (29.) 9,0 (2.7) (.0) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

fixed jib load charts Jib ength 30,5 m (00 ft) iftcrane Jib Capacities - 2250 Series 3 Jib No. 32 with 6 096 mm (20 ft) Strut on No. with ong-reach Top 3 00 kg (29,200 lb) Crane Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 5 Offset 30 Offset 9,8 (65) 22,0 (75) 30,0 (00) 38,0 (25),0 (50) 52,0 (20) 72,0 (20) 8,0 (90) 8,6 (.) 8,2 (39.8) 6,7 (36.7) 5,3 (33.9), (3.) 3, (28.2),6 (25.7) 0,8 (23.3) (6.6) (20) 8, (0.3) 6,9 (37.3) 5,7 (3.6),7 (32.0) 3,6 (29.) 2, (26.7) 0,7 (22.7) 6,8 (6.) 70, (0.7) 7,2 (37.8) 6,0 (35.3) 5, (32.8),0 (30.0) 2,5 (27.6) 0,2 (2.8) 6, (5.2) 76,2 (.) 7, (38.3) 6,2 (35.9) 5, (33.6),3 (30.9) 2,7 (28.0) 9,9 (2.0) 6,0 (.) 82,3 7,6 (38.8) 6,5 (36.) 5,7 (3.2),7 (3.6) 2, (26.8) 9, (9.8) 5,5 (3.3) (90) 0,5 (23.2) 9,7 (20.9) 8,7 (8.8) 7,7 (7.7) (20) 0,7 (23.7) 9,9 (2.5) 9,0 (9.) 8,0 (7.7) 7,5 (6.) 70, 0,9 (2.2) 0, (22.0) 9,2 (9.9) 8,2 (8.2) 7,7 (6.9) 76,2, (2.6) 0,3 (22.) 9,5 (20.) 8, (8.7) 7,9 (7.3) 7,2 (6.3) 82,3,3 (25.0) 0,5 (22.9) 9,6 (20.8) 8,6 (9.) 8, (7.8) 6,9 (6.5) 37 88,0 (290) 5,3 (.6) 5,0 (0.8), (9.7) 5,6 (2.2) 96,0 (320) 3,0 (6.) 2,6 (5.) (90) (20) 70, 76,2 82,3 (90) (20) 70, 76,2 82,3 2,3 (70),8 (32.8) 28,0 (90) 3,5 (30.) 3,8 (30.7),0 (3.2),2 (3.7), (32.) Jib ength 36,6 m (20 ft) 36,0 (20),0 (0) 52,0 (70) 60,0 72,0 80,0 (260) 88,0 (290) 96,0 (320) 00,0 (30) 2,0 (26.) 0,7 (2.) 9,5 (2.) 8,5 (8.5) 7,2 (6.3) 6,5 (.5) 5,9 (3.) 2,3 (27.),0 (2.9) 9,9 (22.0) 8,9 (9.) 7,6 (7.2) 6,8 (5.3) 6, (3.) 2,6 (27.8), (25.7) 0,3 (22.8) 9,2 (20.2) 7,9 (8.0) 7,2 (6.2) 5,7 (2.) 3,8 (7.8) 2,9 (28.),7 (26.3) 0,6 (23.5) 9,6 (2.0) 8,3 (8.8) 7,5 (7.0) 5,3 (.5) 3, (7.0) 2,6 (.3) 3, (28.9) 2,0 (26.9) 0,9 (2.2) 0,0 (2.8) 8,7 (9.6) 7,0 (6.0),8 (0.) 2,9 (5.8) 2, 8,3 (8.2) 7,5 (6.9) 6,8 (5.2) 6,3 (3.8) 5,6 (2.7) (2.0) 8,3 (8.) 7,6 (7.2) 7,0 (5.5) 6, (.2) 5,8 (3.) 5,5 (2.3) (8.6) 7,7 (7.) 7, (5.8) 6,6 (.5) 6,0 (3.) 5,6 (2.6) 5, (2.0) 7,9 (7.7) 7,2 (6.) 6,7 (.8) 6, (3.8) 5,8 (2.9) 5,5 (2.2) 8,0 (7.9) 7, (6.) 6,9 (5.) 6,2 (.) 5,9 (3.2) 5,6 (2.5), (8.2) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

luffing jib range diagram 38 No. 33A or 33 uffing Jib on No. eavy-ift (20) 28,0 (0) 25,0 (00) 2,9 (390) 8,9 75. 0 70 0 6,0 60 0 (380) 5,8 (370) 2,8 (90) 50 0 (360) 09,7 (350) 06,7 (30) 03,6 (330) 00,6 39,6 (30) 2,7 (0) 5,7 (50) 8,8 (60) 5,8 (70) 0 0 (320) 97,5 (30) 9,5 (300) 9, 30,5 (00) 33,5 (0) 36,6 (20) 30 0 (290) 88, 27, (90) EIGT ABOVE GROUND (280) 85,3 82,3 (260) 79,2 76,2 (20) 73,2 70, (220) 67, 88 0 83 0 2,3 (70) 2, 80 0 20 0 0 0 (20) 6,0 (90) 75 0 70 0 65 0 60 0 (20) (70) 5,8 (60) 8,8 (50) 5,7 (0) 2,7 (30) 39,6 (20) 36,6 (0) 33,5 (00) 30,5 (90) 27, 30,5 (00) 33,5 (0) 36,6 (20) 39,6 (30) 2,7 (0) 5,7 (50) 8,8 (60) 5,8 (70) (90) 6,0 2, 27, (90) (70) 2,3 (60) 8,3 (50) 5,2 (0) 2,2 (30) 9, 7,25 m (23' 0") TAISWING,98 m (6' 6") ROTATION 2, m (8' 0") 2, 8,3 (60) 2, 30,5 (00) 36,6 (20) 2,7 (0) 8,8 (60) 6,0 DISTANCE FROM CENTERINE OF ROTATION 67, (220) 73,2 (20) 79,2 (260) 85,3 (280) 9, (300)

luffing jib load charts iftcrane uffing Jib Capacities - 2250 Series 3 uffing Jib No. 33 or No. 33A on No. with eavy-ift Top 3 00 kg (29,200 lb) Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 88 Angle 39 9,8 (32) 2, 95,2 (20.0) 33,5 (0) 2,7 (0) 5,8 (70) 6,0 9,8 (32) 2, 33,5 (0) 2,7 (0) 5,8 (70) 6,0 uffing Jib ength 2,3 m (70 ft),0 (36) 2,0 (0),0 (5) 6,0 (55) 22,0 (70) 26,0 (85) 30,0 (00) 3,0 (0) 86,9 (92.0) 80,6 (75.3) 69,0 (56.) 56,9 (7.7) 37,0 (85.0) 83, (83.3) 78,8 (72.2) 70,9 (59.8) 58,6 (20.9) 37,7 (86.7) 82,5 (82.0) 78,7 (72.0) 7,6 (60.7) 60,6 (2.2) 38, (88.5) (8.7) 62,6 55,7 (39.7) (2.3) (2.) 39, (90.8) (3.6) 5,8 (.) 0,5 (93.0) uffing Jib ength 33,5 m (0 ft),0 (36) 2,0 (0),0 (5) 6,0 (55) 22,0 (70) 26,0 (85) 30,0 (00) 3,0 (0) (59.8) 65,5 (6.8) 58, (22.) 38, (87.8) 30, (67.) 25,0 (5.) 2,0 (7.) (5.) 63,7 (2.2) 58,8 (25.8) 38,9 (89.6) 30,9 (68.6) 25, (5.8) 2,3 (8.0) 62, (39.0) 58, (2.8) 39,7 (9.5) 3,5 (69.8) 25,8 (55.7) 2,6 (8.7) 55, (22.7) 5,5 (0.9), (9.2) 32,2 (7.) 26,3 (56.8) 22,0 (9.6) 7, (0.7), (95.6) 35,6 (80.7) 30,0 (66.6) 25,3 (5.7) 2,5 (8.3) 36,0 (20) 36,0 (20) 8,0 (35.8) 9,0 (39.7) 9,7 (2.0) 20, (3.2) 9,9 (3.2) 6,0 (55) 2, (02.6) 33,5 (0) (99.5) 2,7 (0) (96.3) 5,8 (70) (82.) 6,0 (69.) 6,0 (55) 2, 33,5 (0) 2,7 (0) 5,8 (70) 6,0 uffing Jib ength 8,8 m (60 ft) 20,0 (65) 2,0 30,0 (00) 36,0 (20) 2,0 (0) 50,0 (60) 56,0 60,0 (20) 2,8 (95.2) 33,8 (72.9) 2,6 (53.2) 8,8 (0.7),8 (32.0) 0,8 (25.6) 2,0 (93.) 3, (7.3) 25,0 (5.0) 9, (.3) 5,2 (32.7), (26.),0 (90.8) 35,7 (76.6) 25,6 (55.3) 9,6 (2.2) 5, (33.3),6 (26.8) 3,9 (77.3) 3,5 (68.7) 25,9 (56.2) 9,8 (2.7) 5,6 (33.7),7 (27.) 29, (65.) 26,6 (58.2) 22,2 (8.) 8,2 (39.),9 (32.),6 (26.5) uffing Jib ength 6,0 m (200 ft) 20,0 (65) 2,0 30,0 (00) 36,0 (20) 2,0 (0) 50,0 (60) 56,0 60,0 (20) 32,7 (72.5) 28,9 (63.0) 23, (50.9) 8,2 (39.2),2 (30.5) 0, (2.2) 8, (9.3) 7,2 (5.),6 (0.3) 32,0 (70.9) 28,6 (62.5) 23,5 (5.) 8, (39.7), (3.0) 0,6 (2.6) 8,6 (9.8) 7, (5.8) 5, (2.) 29,7 (65.8) 28, (6.6) 23,6 (5.3) 8,7 (0.3),6 (3.) 0,8 (2.9) 8,7 (20.0) 7,5 (6.2) 5,9 (3.) 26,0 (57.6) 2,5 (53.9) 2,8 (7.7) 8,8 (0.9),9 (32.),0 (25.) 8,8 (20.) 7,7 (6.5) 6,0 (3.) 22,3 (9.5) 2, (6.3) 8,8 (.0) 6,2 (35.) 3,8 (30.0),0 (25.3) 8,9 (20.6) 7,8 (6.6) 6,3 (.) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

luffing jib load charts 0 iftcrane uffing Jib Capacities - 2250 Series 3 uffing Jib No. 33 or No. 33A on No. with eavy-ift Top 3 00 kg (29,200 lb) Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 75 Angle 20,0 (65) 2, 66,2 (8.5) 33,5 (0) 2,7 (0) 5,8 (70) 6,0 20,0 (65) 2, 33,5 (0) 2,7 (0) 5,8 (70) 6,0 uffing Jib ength 2,3 m (70 ft) 22,0 (70) 2,0 28,0 (90) 30,0 (00) 36,0 (20) 2,0 (0) 6,0 (50) 8,0 (60) 55,0 (28.6) 7,0 (00.9) 36, (82.5) 6,5 (0.9) 55, (9.3),9 (96.2) 36,9 (79.2) (5.8),2 (00.) 0,6 (87.9) 2,7 (96.7) 39,2 (8.9) 3,2 (67.6) 36, (78.8) 28,9 (62.5) uffing Jib ength 33,5 m (0 ft) 22,0 (70) 2,0 28,0 (90) 30,0 (00) 36,0 (20) 2,0 (0) 6,0 (50) 8,0 (60) 37,3 (85.2) 33,2 (7.3) 2,6 (52.9) 3,5 (99.6) 38, (8.7) 27,5 (59.0) 2,0 (5.2) (85.9) 3, (66.) 23,2 (9.9) (.0) 30, (65.) 2,6 (53.2) 2,7 (8.5) 20, (3.0) 27,7 (59.9) 22,5 (8.8) 9,9 (.) 8,7 (0.5) 50,0 (70) 50,0 (70) 7,7 (36.8) 30,0 (00) 2, 33,5 (0) 2,7 (0) 5,8 (70) 6,0 30,0 (00) 2, 33,5 (0) 2,7 (0) 5,8 (70) 6,0 uffing Jib ength 8,8 m (60 ft) 3,0 (0) 36,0 (20) 2,0 (0) 8,0 (60) 5,0 60,0 68,0 (220) 72,0 (20) 76,0 (260) 26,7 (60.3) 2,2 (52.0) 8,6 (39.9),6 (3.5),7 (25.2) 27,2 (58.3) 20,5 (.) 6, (3.7) 3,0 (27.9) (66.0) 23,0 (9.3) 7,8 (38.2),2 (30.),5 (2.7) 23, (50.6) 9, (.8) 5,5 (33.2) 2,5 (26.7) 2, (5.6) 7, (37.5),5 (3.3) 2,2 (26.) (22.) uffing Jib ength 6,0 m (200 ft) 3,0 (0) 36,0 (20) 2,0 (0) 8,0 (60) 5,0 60,0 68,0 (220) 72,0 (20) 76,0 (260) 7,9 (38.) 3,9 (29.9), (23.7) 8,9 (9.0) 6,6 (5.) 9,9 (2.6) 5, (33.0) 2,2 (26.) 9,8 (20.9) 7, (6.9) (6.8) 7,0 (36.3) 3,3 (28.5) 0,7 (22.8) 8,0 (8.) 7,0 (.8) 8,2 (39.2),8 (3.6),7 (25.) 8,8 (20.) 7,6 (6.3) 6,6 6, (35.3) 3,5 (29.),3 (2.2) 8,9 (20.3) 7,9 (6.9) 7,0 (3.7) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

fixed jib on luffing jib range diagram No. 0 Fixed Jib on No. 33A or 33 uffing Jib on No. eavy-ift 2 (530) 6,5 (520) 58,5 (50) 55, 75. 0 5 0 6,0 (500) 52, (90) 9,3 (80) 6,3 (70) 3,2 (60) 0,2 (50) 37,2 (0) 3, 8,8 (60) 5,8 (70) (90) (30) 3, (20) 28,0 (0) 25,0 (00) 2,9 (390) 8,9 70 0 6,0 60 0 (380) 5,8 (90) (370) 2,8 (360) 09,7 8,8 (60) 5,8 (70) 50 0 (350) 06,7 (30) 03,6 0 0 (330) 00,6 (320) 97,5 (30) 9,5 30 0 (300) 9, (290) 88, EIGT ABOVE GROUND (280) 85,3 82,3 (260) 79,2 76,2 (20) 73,2 70, (220) 67, (20) 88 0 83 0 75 0 20 0 0 0 6,0 6,0 (90) (90) (70) 5,8 (60) 8,8 (50) 5,7 (0) 2,7 (30) 39,6 (20) 36,6 (0) 33,5 (00) 30,5 (90) 27, 2, (70) 2,3 (60) 8,3 (50) 5,2 (0) 2,2 (30) 9, 7,25 m (23' 0") TAISWING,98 m (6' 6") ROTATION 2, m (8' 0") 8,3 (60) 2, 30,5 (00) 36,6 (20) 2,7 (0) 8,8 (60) 6,0 DISTANCE FROM CENTERINE OF ROTATION 67, (220) 73,2 (20) 79,2 (260) 85,3 (280) 9, (300) 97,5 (320) 03,6 (30)

fixed jib on luffing jib load charts iftcrane Fixed Jib on uffing Capacities - 2250 Series 3 Fixed Jib No. 0 Set at 5 Degree Offset Angle on uffing Jib No. 33 or No. 33A on No. with eavy-ift Top 3 00 kg (29,200 lb) Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 88 Angle 3 uffing Jib 8,8 5,8 6,0 (60) (70) (90) (90) 6,0 (90) 6,0 (90) 6,0 (90) 6,0 2,3 (70) 2, (7.2) 9, (3.7) 9,0 (2.0) 9,9 (.0) 8,5 (0.8) 7,8 (39.) 26,0 (90) 9,5 (.7) 8, (38.6) 7,3 (37.) 8,3 (39.3) 7,0 (36.) 6,3 (35.0) 5,9 (3.),8 (32.0),2 (30.7) 3,5 (30.0) 3,5 (29.7) 3,2 (28.6) Fixed Jib ength 2,2 m (0 ft) 5 offset 32,0 (0) 38,0 (30),0 (50) 50,0 (70) 56,0 (90) (20) 6,8 (35.5), (29.5),6 (2.2) 9,5 (9.8) 7,8 (6.2) 5,7 (2.6) 5,6 (33.0) 3, (27.5) 0,8 (22.7) 8,9 (8.6) 7,3 (5.3) 5,8 (2.8),9 (3.7) 2,6 (26.5) 0, (2.8) 8,6 (8.0) 7, (.8) 5,6 (2.) 6,0 (33.9) 3,5 (28.5),3 (23.6) 9,3 (9.) 7,7 (6.0) 5,8 (3.0),8 (3.5) 2,6 (26.6) 0,5 (22.) 8,7 (8.2) 7,2 (5.0) 5,6 (2.5),2 (30.2) 2, (25.5) 0, (2.2) 8, (7.5) 6,9 (.5) 5, (2.0),2 (30.) 2, (26.2) 0,5 (22.2) 8,8 (8.5) 7,3 (5.) 5,3 (.8) 3,2 (28.3),5 (2.) 9,8 (20.6) 8,2 (7.2) 6,8 (.3) 5,3 (.9) 2,7 (27.),0 (23.) 9, (9.8) 7,9 (6.5) 6,6 (3.8) 5, (.) 3,3 (28.7),8 (25.) 0, (2.5) 8,6 (8.) 7,2 (5.) 5,3 (.9) 2, (26.6) 0,9 (23.3) 9, (9.9) 8,0 (6.8) 6,7 (.) 5,3 (.7),9 (25.6) 0,5 (22.3) 9,0 (9.) 7,6 (6.) 6, (3.5) 5,0 (.2) 68,0, -,3,, (8.8), (8.9),5 (8.9), (8.7), (8.7), (8.8) 76,0 2,6 (5.6) 2,6 (5.7) 2,7 (((5.9) uffing Jib 8,8 5,8 6,0 (60) (70) (90) (90) 6,0 (90) 6,0 (90) 6,0 (90) 6,0 28,0 (95) (2.0) 32,0 (0) 9, (9.7) 8,9 (9.) 8,9 (9.3) 8,9 (9.3) 8,7 (8.9) 8, (8.3) 8, (7.6) 7,6 (6.6) 7, (6.) 7,5 (6.5) 7, (5.5) (5.0) Fixed Jib ength 36,6 m (20 ft) 5 offset 38,0 (30),0 (50) 50,0 (70) 56,0 (90) (20) 72,0 (20) 80,0 88,0 (290) 8,3 (8.0) 7,6 (6.) 6,9 (5.) 6, (3.9) 5,7 (2.6),7 (0.2) 3,6 (7.) 2,2 (.6) 8,3 (7.9) 7,5 (6.3) 6,9 (5.0) 6,3 (3.) 5,3 (.8), (9.6) 3,6 (7.2) 2,2 (.7) 8,2 (7.7) 7,5 (6.3) 6,8 (.6) 6, (2.9) 5, (.3),2 (9.2) 3,5 (7.2) 2,3 (.9) 8,2 (7.7) 7,5 (6.3) 6,9 (.9) 6, (3.8) 5,5 (2.2),6 (9.9) 3,3 (6.7) 2, (.7) 8, (7.6) 7, (6.) 6,7 (.5) 6,0 (2.9) 5, (.),3 (9.2) 3, (6.7) 2,2 (.8) 7,9 (7.0) 7,2 (5.5) 6,5 (.0) 5,8 (2.),9 (0.9), (8.8) 3,3 (6.7) 2,2 (.8) 7,6 (6.6) 7, (5.3) 6,5 (.0) 5,9 (2.6) 5,0 (.2),2 (8.9) 2,8 (5.) 7,2 (5.6) 6,6 (.) 6, (3.) 5,5 (.7),7 (0.) 3,9 (8.5) 2,8 (5.5) 6,9 (5.) 6, (3.9) 5,8 (2.6) 5,2 (.2), (9.9) 3,7 (8.) 2,8 (5.5) 7, (5.5) 6,6 (.) 6, (3.2) 5,5 (.9),8 (0.6),0 (8.3) 2,5 (.8) 6,7 (.5) 6,2 (3.5) 5,7 (2.3) 5,2 (.), (9.8) 3,7 (8.) 2,5 (.9) 6, (.) 6,0 (3.0) 5,5 (.8),9 (0.6),2 (9.) 3,5 (7.7) 2,5 (.9) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

fixed jib on luffing jib load charts iftcrane Fixed Jib on uffing Capacities - 2250 Series 3 Fixed Jib No. 0 Set at 5 Degree Offset Angle on uffing Jib No. 33 or No. 33A on No. with eavy-ift Top 3 00 kg (29,200 lb) Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 83 Angle uffing Jib 8,8 5,8 6,0 (60) (70) (90) (90) 6,0 (90) 6,0 (90) 6,0 (90) 6,0 30,0 (00) (50.5) 3,0 (5) 22,0 (7.9) 20,3 (.2) 9,5 (2.) 20,5 (.7) 9,0 (.) 8,2 (39.7) 7,5 (38.) 6,3 (35.7) (3.2) (30.0) (30.0) Fixed Jib ength 2,2 m (0 ft) 5 offset 38,0 (30),0 (50) 50,0 (70) 56,0 (90) (20) 68,0 20,6 (.2) 6,9 (3.5) 3,0 (26.7) 0,2 (20.9) 7, (6.) 6,3 (.7) 9,0 (0.8) 6,7 (35.) 3,2 (27.) 0,3 (2.2) 7,5 (6.6) 6, (2.) 8,3 (39.2) 6, (3.) 3, (27.5) 0,5 (2.5) 7,6 (6.9) 6,5 (3.0) 9, (.8) 6,7 (3.) 2,8 (26.2) 0,0 (20.) 7,2 (5.9) 6, (2.) 7,9 (38.6) 6,0 (3.0) 3,0 (26.6) 0, (20.7) 7,3 (6.2) 6,2 (2.6) 7,3 (37.) 5, (32.8) 3,2 (27.0) 0,3 (2.0) 7, (6.) 6,3 (2.8) 6,9 (36.6) 5,5 (32.8) 2,2 (25.0) 9, (9.2) 6,6 (.7) 5,5 (.2) 5,7 (3.0), (30.8) 2, (25.) 9,5 (9.5) 6,8 (5.0) 5,6 (.) 5,0 (32.6) 3,8 (29.7) 2,3 (25.8) 9,7 (9.8) 6,8 (5.2) 5,7 (.6) 3,6 (30.0) 3,6 (30.0) 2,9 (26.2) 9,8 (9.8) 6,8 (5.0) 5,6 (.2) 3,6 (30.0) 3, (29.0) 2,2 (26.0) 9,9 (20.2) 6,8 (5.2) 5,7 (.) 3,6 (30.0) 3,0 (27.9),7 (25.0) 0, (20.5) 7,0 (5.5) 5,8 (.6) 76,0 3,8 (8.3) 3,8 (8.) 3,9 (8.6) 3,7 (8.) 3,8 (8.3) 3,8 (8.5) 80,0 2,9 (5.) 2,9 (5.5) 3,0 (5.8) uffing Jib 8,8 5,8 6,0 (60) (70) (90) (90) 6,0 (90) 6,0 (90) 6,0 (90) 6,0 0,0 (35) (8.),0 (5) 8,0 (7.6) 7,9 (7.5) 7,9 (7.) 7,8 (7.3) 7,8 (7.2) 7,7 (7.) (6.5) (6.3) Fixed Jib ength 36,6 m (20 ft) 5 offset 8,0 (60) 52,0 (70) 58,0 (90) (20) 72,0 (20) 80,0 88,0 (290) 92,0 (30) 7,5 (6.5) 7, (5.9) 6,6 (.6) 6, (3.5) 5,6 (2.2), (8.9) 3,0 (6.7) 2,5 (.3) 7,5 (6.) 7, (5.8) 6,5 (.5) 6, (3.5) 5,6 (2.2),5 (9.) 3, (6.9) 2,5 (.7) 7,5 (6.) 7, (5.7) 6,6 (.6) 6, (3.5) 5,6 (2.2),6 (9.2) 3,2 (7.0) 2,6 (5.0) 7, (6.3) 7, (5.7) 6,5 (.5) 6,0 (3.) 5,5 (2.),2 (8.) 2,8 (6.2) 2,3 (.) 7,5 (6.9) 7,0 (5.6) 6,5 (.) 6,0 (3.) 5,5 (2.),3 (8.6) 2,9 (6.) 2,3 (.5) 7,3 (6.2) 7,0 (5.6) 6,5 (.) 6,0 (3.) 5,5 (2.),3 (8.7) 3,0 (6.5) 2, (.6) 7, (5.8) 6,8 (5.) 6,3 (.) 5,9 (3.2) 5,3 (.2) 3,6 (7.2) 2,3 (5.0) 7,0 (5.5) 6,7 (5.0) 6,3 (.0) 5,9 (3.) 5, (.) 3,7 (7.3) 2, (5.2) 7,0 (5.) 6,7 (5.0) 6,3 (.0) 5,9 (3.) 5, (.6) 3,8 (7.5) 2, (5.3) 6,9 (5.2) 6,6 (.7) 6,2 (3.8) 5,8 (2.9) 5,0 (0.6) 3, (6.6) 2,0 (.) 6,8 (5.0) 6,6 (.6) 6,2 (3.7) 5,8 (2.9) 5, (0.8) 3, (6.7) 2, (.5) 6,8 (.9) 6,5 (.5) 6,2 (3.7) 5,8 (2.8) 5,2 (.0) 3,5 (6.9) 2, (.7) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

fixed jib on luffing jib load charts iftcrane Fixed Jib on uffing Capacities - 2250 Series 3 Fixed Jib No. 0 Set at 5 Degree Offset Angle on uffing Jib No. 33 or No. 33A on No. with eavy-ift Top 3 00 kg (29,200 lb) Counterweight 5 30 kg (20,000 lb) Carbody Counterweight 360 Rating kg (lb) x 000 75 Angle 5 uffing Jib 8,8 5,8 6,0 (60) (70) (90) (90) 6,0 (90) 6,0 (90) 6,0 (90) 6,0 6,0 (50) 8, (0.3) 8,0 (60) 7,5 (38.) 6, (35.7) 5,6 (33.9) 6,8 (36.6) (3.) (32.5) Fixed Jib ength 2,2 m (0 ft) 5 offset 52,0 (70) 58,0 (90) (20) 68,0 76,0 80,0 5,6 (3.8) 2,8 (28.) 0,0 (22.2) 8,5 (7.) 6,2 (3.6) 5,0 (33.3) 2,3 (27.) 0,2 (22.6) 8,8 (8.0) 6, (.),3 (3.8),9 (26.5) 9,8 (2.8) 8,7 (8.0) 6,6 (.6) 5, (3.3) 2,6 (27.9) 9,8 (2.7) 8,3 (7.0) 6,0 (3.2) 5,0,6 (32.) 2, (26.9) 0,0 (22.) 8,6 (7.5) 6,2 (3.7) 5,2 3,8 (30.7),7 (26.0) 9,7 (2.) 8,5 (7.6) 6, (.) 5, (0.8),3 (3.7) 2,0 (26.6) 9,3 (20.5) 7,8 (5.7) 5, (2.0),5 (9.0) 3,3 (29.6), (25.3) 9,3 (20.6) 8, (6.3) 5,7 (2.5),7 (9.3) 2,6 (28.0),0 (2.) 8,9 (9.8) 7,8 (6.) 5,8 (2.9),9 (9.7) 3,6 (30.0) 2,6 (28.0) 9,6 (2.3) 8,0 (6.) 5,5 (2.),5 (8.8),8 (26.) 9,6 (2.3) 8,3 (6.7) 5,7 (2.5),7 (9.2),0 (2.5) 9,3 (20.5) 8,0 (6.) 5,9 (3.0),8 (9.6) 88,0 (290) 3,2 (7.0) 2,8 (6.2) 3,0 (6.5) 3, (6.8) (300) (5.2) (5.6) uffing Jib 8,8 5,8 6,0 (60) (70) (90) (90) 6,0 (90) 6,0 (90) 6,0 (90) 6,0 58,0 (95) (5.) (20) 6, (.3) 6, (.3) 6, (.3) 6,3 (.) 6,3 (.) 6,3 (.) 6,0 (3.) Fixed Jib ength 36,6 m (20 ft) 5 offset 66,0 (220) 68,0 76,0 80,0 88,0 (290) 92,0 (30) 00,0 (330) (30) 6,3 (3.8) 6, (3.) 5,6 (2.5) 5, (.8),3 (9.5) 3,6 (7.3) 2, (5.3) 6,3 (3.9) 6,2 (3.) 5,7 (2.6) 5, (.8),5 (9.8) 3,8 (7.5) 2,5 (5.5) (.5) 6,3 (3.9) 6,2 (3.) 5,7 (2.6) 5, (.9),6 (0.2) 3,9 (7.8) 2,7 (5.8) (.8) 6,2 (3.7) 6, (3.2) 5,6 (2.) 5, (.7), (9.0) 3, (6.8) 2,2 (.8) 6,3 (.0) 6,2 (3.2) 5,6 (2.) 5, (.8),3 (9.3) 3,5 (7.0) 2,3 (5.) (.2) 6,2 (3.6) 6, (3.2) 5,6 (2.5) 5, (.8), (9.7) 3,7 (7.3) 2, (5.3) (.) 6,0 (3.) 5,8 (2.8) 5,5 (2.) 5,2 (0.5) 3,6 (7.8) 2,9 (5.6) 5,9 (3.0) 5,8 (2.7) 5, (2.) 5,3 (0.9) 3,7 (8.) 3,0 (5.8) 5,9 (3.0) 5,8 (2.7) 5, (2.0) 5,2 (.0) 3,9 (8.5) 3, (6.),9 (.) 5,7 (2.7) 5,7 (2.) 5,3 (.8) 5,0 (9.9) 3,3 (7.2) 2,6 (.9) (2.6) 5,6 (2.3) 5,3 (.8) 5, (0.3) 3, (7.5) 2,7 (5.2) (2.) 5,5 (2.2) 5,3 (.7) 5,0 (0.2) 3,6 (7.8) 2,8 (5.5) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

Backed by Manitowoc CraneCARE SM CraneCARE is Manitowoc s comprehensive service and support program. It includes classroom and on-site training, prompt parts availability, expert field service, technical support and documentation for every one of the more than 7,000 Manitowoc cranes currently in use throughout the world. That s commitment you won t find anywhere else. That s CraneCARE. Manitowoc Cranes, Inc. P.O. Box 70 Manitowoc, WI, USA 522-0070 Telephone 920-68-662 Facsimile 920-683-6277 www.manitowoccranes.com PRODUCT IMPROVEMENTS MAY CANGE SPECIFICATIONS 2000 MANITOWOC 030-2250-PG-US-E-5000