B /V Ø 20 0 5 60 Pg 00 22 3 Actuation from front Thermoplastic enclosure Central mounting Long life on-contacting principle Pre-wired cable available, cable length 1 m Protection class IP 6 When the switches and actuators come together, the colours must coincide: Red () to red () and green () to green (). This does not apply to the bistable contact. Ø 13 Technical data tandards: IEC/E 60-5-1 Design: cylindrical Enclosure: glass-fibre reinforced thermoplastic tightening force on nut 22 mm A/F max. 0 cm Protection class: IP 6 to E 6052 Termination: cable H03VV-F 2 x 0.5 mm 2, A03VV-F 3 x 0.5 mm 2, length 1 m Mode of operation: magnetic witching voltage: max. 0 VAC B -rz/v: max. 2 VAC/DC witching current: max. 3 A B -rz/v: max. 1 A witching capacity: max. 0 VA/W B -rz/v: max. 60 W Dielectric strength: > 600 VAC (50 Hz) B -rz/v: > 350 VAC (50 Hz) witching speed: max. 1 m/s witching frequency: max. 0/s B -rz/v: max. 200/s witching time Close : 0.3 ms - 1.5 ms witching time Open : max. 0.5 ms Bounce duration: 0.3... 0.6 ms max. 3 ms Ambient temperature: C + 5 ºC Mechanical life: 1 billion operations Electrical life: 1 million - 1 billion operations, depending on load Resistance to shock: g on sine wave B -rz/v: g on sine wave Resistance to vibration: g on sine wave B -rz/v: g on sine wave Resistance to vibration: 55 Hz, amplitude 1 mm witching point accuracy: ± 0. mm, T = constant Contact variants 1 O contact B -z/v with actuating magnet 1 C contact B -01z/V with actuating magnet 1 bistable contact B -rz/v with - actuating magnet Approvals C B -➀z/➁V o. Replace Description ➀ 01 1 C contact 1 O contact r 1 bistable contact ➁ With bias magnet /1 Without bias magnet ote A 3,0 2,0 1,5 1,0 0 0 0 0 2200 V witching capacity ote The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. The actuating magnets are not included in delivery. To choose the appropriate actuating magnets, please use the tables on page 2-0. 2-1
election table: Magnetic reed switches Actuating distances Actuating magnets B 0-z B 0-01z B 0-rz B 5-r B 3-z B 3-01z B 3-rz B 32- B 32-01 B 32-11 B 32-r B 32-11r B 3-r B -z B -z/1 B -01z B -rz B -z/v B -01z/V B -11z/V B -11z/1V B -rz/v B -11rz/V B 20-z B 20-20z B 20-01z B 20-02z B 20-11z B 20-rz B 20-2rz B 20-11rz Page 2- Page 2-2 Page 2-2 Page 2-2 Page 2-3 Page 2-6 Page 2-6 Page 2- Page 2- Page 2- Page 2-0 Page 2-0 Page 2-1 Page 2-1 Page 2-2 Page 2-2 BP 6-1 2- BP 6-22 BP 3-0-5 BP 2- BP 6-2- 2-5 5 5 BP 5 BP - 5-20 5 5 2 x BP -20 2-13 2-13 1 1 3 2 x BP 20 20 2 x BP -36 6-20 20 BP -1 2-6 6 6 BP 1 1 BP - 5-22 1 1 6 2 x BP -22 2-1 1 2 x BP 13-3 -2 2 x BP /2 1 1 2 x BP /2 22 1 1 22 2 x BP /2 22 1 1 22 BP 3 5-20 -20 BP 3 - - - - - BP 3 20-50 -0 - - - - 20-2 x BP 3-26 5-1 2 x BP 3 22-60 BP 20-0-1 20 20 BP 20 3-5-20 5-20 BP 20-3 3-2 3-5-20 5-20 BP 31-0-1 20 20 BP 31 3-5-20 5-20 BP 31-0 - 3-5-20 5-20 BP 11 22-2 2-16 -20 5-20 BP 11 5 BP 11 - -23 5 5 2 x BP 11 3-20 20 2 x BP 11 3-20 20 BP -32-20 - - - 20 BP 20 20 BP -3 5-20 20 2 x BP - - - - 5-2 2 x BP - - - - 5-20 BP 21-50 20-0 -50 5 BP 21-5 -0-0 -5 20-5 -35 BP 21-5 -0-0 -5-35 2 x BP 21 20-60 20-55 20-55 20-60 -50 2 x BP 21 20-60 20-55 20-55 20-60 20-55 -50 BP 22 BP 22 +BP 22 35 2 x BP 22-55 BE 20 20 20 BE 20 20 20 BE 20 20 20 6 2-0 2-1
ystem components ystem components ystem components 1, ø3,3 ø 5 BP 6 ø ø1 BP, ø 3,3 ø 11, 1 BP 51 ø1,5 ø,3 ø 0 ø 2 51 () 0 BP BP 20 / BP 20 () ø20 5 23,5 3 BP /2 BP 31 ø3 5,3 5 23,5 3 BP 3 BP 31 / BP 31 0 BP BP 20 BP 11 Unenclosed, - BP 6 Unenclosed, - BP Unenclosed, - BP Unenclosed, - BP thermoplastic enclosure, - BP Unenclosed, - BP /2 thermoplastic enclosure, - BP 3 metal enclosure, - BP 20 metal enclosure Al, BP 20 metal enclosure Al, BP 20 thermoplastic enclosure, - BP 31 thermoplastic enclosure, BP 31 thermoplastic enclosure, BP 31 metal enclosure Al, - BP 11 2-
ca. 00 Magnetic reed switches ystem components ystem components ystem components 0 3 0 0 0 3 20 BP 11 / BP 11 2x BP 11 / 2x BP 11 BP 1 0 50 6,5 1 1 0 2x BP / 2x BP,5 13 BP 21 35 BP 21 / BP 21 35 0 2x BP 22 / 2x BP 22 55 3 2,5 1 62 0 5 66 160 15 10 BP 22,5 35 BP 22 / BP 22 ø 6,5 BP / BP 2x BP 21 / 2x BP 21 BE 20 16,5 metal enclosure Al, BP 11 metal enclosure Al, BP 11 metal enclosure Al, 2x 2x BP 11 metal enclosure Al, 2x 2x BP 11 metal enclosure Al, - BP metal enclosure Al, BP metal enclosure Al, BP metal enclosure Al, 2x 2x BP metal enclosure Al, 2x 2x BP metal enclosure Al, - BP 21 metal enclosure Al, BP 21 metal enclosure Al, BP 21 metal enclosure Al, 2x 2x BP 21 metal enclosure Al, 2x 2x BP 21 metal enclosure Zn, - BP 22 metal enclosure Zn, BP 22 metal enclosure Zn, BP 22 metal enclosure Zn, 2x 2x BP 22 metal enclosure Zn, 2x 2x BP 22 Electromagnet, thermoplastic enclosure BE 20 2-5
pacer B 31/33 Terminal mounting H,5 ø5 13 3,5 1,5 ø M5 1 33 6 To mount the magnetic safety sensor and actuator on ferromagnetic material For B Material: thermoplastic Holder H1/1 Compensating coil K 1 ø 13 3 1,5 ca. 0 1,5 3 5,5 2,5 3 3,5 M16 x 1,5 For B Metal holder with 2 elastic bearings Provides high resistance to vibration Temperature range C + 0 ºC For cable lengths up to 0 m Cable H05V-K 1 mm 2, cable length 0 mm The bucking coil is to be wired in series with the reed contact Version for high temperature C + 0 ºC, ordering suffix -T Holder H2 Compensating coil K 2 ø 13 2 16 ca. 0 3 5 22 2,5 11 M16 x 1,5 5 For B Metal holder with rubber washer Temperature range C + 0 ºC For cable lengths up to 200 m or 2 x 0 m Cable H05V-K 1 mm 2, cable length 0 mm The bucking coil is to be wired in series with the reed contact 2-6