Posture and pressure care solutions Information for specialist dealers
Ottobock Seating Philosophy We believe every wheelchair user has a unique combination of requirements and priorities necessitating tailored wheelchair seating solutions, often using a combination of different wheelchair and seating products. Seating solutions should consider User comfort: static and dynamic seating tolerance Functional independence: postural influences on mobility, communication, field of vision, breathing and swallowing, etc. Purposeful movement: vital for independence, mobility, comfort and well-being Safety: risk management balanced against potential benefits Pelvic position: influence on spinal shape, neck and head position Foot position: impact on the pelvis position Postural alignment and stability: effect of static and dynamic situation on positioning (up / down slopes, traversing cambers or when the wheelchair is used as a seat in a vehicle) Flexible postural changes: need for corrective support Fixed postural changes: need to accommodate and support Muscle tone: positioning influences muscle tone and reflexes Tissue tolerance: vulnerability to pressure, shear and unfavourable microclimate conditions 2 Ottobock Seating and positioning accessories
Table of contents 1 Head supports and mounting kits Head and neck supports... 6 Mounting kits and attachment components... 8 2 Thoracic supports Thoracic supports... 14 3 Arm supports Arm and hand supports... 20 Mounting options... 24 4 Leg supports Calf supports and mounting accessories... 28 Foot sandals... 29 Foot strap and foot caps... 30 5 Seats and seating systems, back systems Seat cushions... 34 Back support systems... 44 6 Belts and belt systems Chest / shoulder belts... 50 Leckey Leeway upper body harnesses... 52 Positioning belts... 53 Seating and positioning accessories Ottobock 3
Head supports and mounting kits 1
Head supports and mounting kits Head and neck supports With the appropriate mounting kits, the head and neck supports can be mounted to most Ottobock seating systems and wheelchairs. Combination head / neck support Size 430C1=1-7 (large) A=220 mm, B=130 mm, C=90 mm 430C1=3-7 (small) A=180 mm, B=115 mm, C=55 mm Head support 430H1=1-7 (large) 430H1=3-7 (small) Size A=290 mm, B=150 mm, C=50 mm A=250 mm, B=100 mm, C=50 mm Head / neck support with lateral support Size 430C2=1-7 (large) A=220 mm, B=130 mm, C=130 mm 430C2=3-7 (small) A=180 mm, B=115 mm, C=90 mm 6 Ottobock Seating and positioning accessories
1 A D C X-shaped neck support Size 430C3=1-7 (large) A=220 mm, B=195 mm, C=160 mm, D=130 mm 430C4=1-7 (small) A=203 mm, B=147 mm, C=110 mm, D=85 mm B Head support with ABS exterior shell / soft head support Size 430H2=1-7 (large) A=280 mm, B=190 mm, C=76 mm 430H2=3-7 (small) A=190 mm, B=150 mm, C=50 mm Seating and positioning accessories Ottobock 7
Head supports and mounting kits Mounting kits and attachment components The head support mounting kits are used in combination with the various Ottobock head supports for mounting on various wheelchairs and seating systems. B Multi-axis mounting kit, straight Colour Dimensions 476L52=SK020 Silver A=400 mm,b=200 mm 476L52=SK025 Black A B Multi-axis mounting kit, offset Colour Dimensions 476L52=SK010 Silver A=400 mm, B=200 mm, C=70 mm 476L52=SK015 Black A C Gooseneck mounting kit Colour Dimensions 476L52=SK030 Silver A1=273 mm, A2=390 mm, 476L52=SK035 Black B1=512 mm, B2=140.7 mm A2 B1 B2 A1 8 Ottobock Seating and positioning accessories
1 Clamp fitting, reinforced (for installation on seating shells) Colour Dimensions 477L52=SK050 Silver A=63.5 mm, B=63.5 mm, 477L52=SK055 Black C=80.0 mm, D=80.0 mm B D A C Rock-n-lock head support 470C49=RNLBRKT-M This unique head support holder features maximum adjustability and excellent durability. Hardware that is adjustable in various ways permits adaptations in all directions. The standard holder can be adjusted to the head up to 5 (127 mm) off the centre line. Fold-away head support 470C49=FDCLBRKT The premium rock-n-lock holder has a hinge mechanism which allows the pad and top half of the holder to fold down. Seating and positioning accessories Ottobock 9
Head supports and mounting kits S.T.S. clamps, single Tube diameter Colour 434H1=3/4 19.0 mm Silver 434H1=7/8 22.2 mm Silver 434H1=1 25.0 mm Silver 434H1=3/4-7 19.0 mm Black 434H1=7/8-7 22.2 mm Black 434H1=1-7 25.0 mm Black These clamps can be installed on the wheelchair without any modifications. For Ottobock wheelchairs, you require S.T.S. clamps for a tube diameter of 25 mm. S. T. S. clamp, small, individual Tube diameter Colour 477D52=SK033 3/4"=19.0 mm Silver 477D52=SK039 7/8"=22.2 mm Silver 477D52=SK027 1"=25.0 mm Silver 477D52=SK036 3/4"=19.0 mm Black 477D52=SK042 7/8"=22.2 mm Black 477D52=SK030 1"=25.0 mm Black These small clamps are particularly suitable for small wheelchairs or wheelchairs with low back height. Clinical mounting kit Wheelchair width Colour 476D52=SK080 310 370 mm Silver 476D52=SK085 310 370 mm Black 476D52=SK060 380 420 mm Silver 476D52=SK065 380 420 mm Black 476D52=SK010 430 530 mm Silver 476D52=SK015 430 530 mm Black 476D52=SK020 540 640 mm Silver 476D52=SK025 540 640 mm Black The clinical mounting kit is designed for assessment purposes only. The mounting device is easy to attach to the push handles of a wheelchair with a seat width of 310 mm to 640 mm. 10 Ottobock Seating and positioning accessories
1 Mounting kit Wheelchair width Colour 476D52=SK030 170 420 mm* Silver 476D52=SK035 170 420 mm* Black 476D52=SK040 400 540 mm Silver 476D52=SK045 400 540 mm Black 476D52=SK050 520 630 mm Silver 476D52=SK055 520 630 mm Black The wheelchair mounting kit can be attached to the back tubes of wheelchairs with the S.T.S. clamps. 3 different sizes are available for this. They cover seat widths ranging from 180 mm up to 620 mm. The wheelchair can still be folded at any time thanks to the simple mounting system. Please order the S.T.S. clamps separately (2 units are necessary). * For sizes 476D52=SK030/SK035, please only use the small S.T.S. clamps. Wheelchair mounting kit* Size 476D52=SK090 476D52=SK091 Clamp fitting kit* 476D52=SK095 380 510 mm 260 360 mm * Only required in combination with chest / shoulder belts 476P52=SK010/SK011/SK012, 476P52=SK015/SK016/SK017 and 476P52=SK020/SK021/ SK022 Wheelchair mounting kit for attaching the upper straps of the positioning system for the upper body, to fit wheelchair widths of 260 510 mm. Clamp fitting kit / holder to fit 22 mm and 25 mm back tube diameter Seating and positioning accessories Ottobock 11
Thoracic supports 2
Thoracic supports Thoracic supports Side thoracic support (S.T.S.) Size 434P1=1-7 (large) A=180 mm, B=110 mm 434P1=2-7 (medium) A=130 mm, B=90 mm 434P1=3-7 (small) A=120 mm, B=75 mm The S.T.S. supports offered in three sizes provide effective and comfortable lateral support for the trunk. Although they are pre-shaped, they can be adapted by bending them at the thorax. A locking function protects the supports from rotating, and they can be loosened and turned away by lifting them. They can be used with most common wheelchairs. S.T.S. mounting kit, standard Mounting side Colour Dimensions 434F1=L 434F1=R 434F1=L-7 434F1=R-7 Left Right Left Right Chrome Black A=75 mm, B=100 mm, C=90 mm S.T.S. mounting kit, extended Mounting side Colour Dimensions 434F2=L 434F2=R 434F2=L-7 434F2=R-7 Left Right Left Right Chrome Black A=150 mm, B=100 mm, C=90 mm 14 Ottobock Seating and positioning accessories
2 S.T.S. mounting kit, offset Mounting side Colour Dimensions 434F3=L 434F3=R 434F3=L-7 434F3=R-7 Left Right Left Right Chrome Black A=110 mm, B=95 mm, C=45 mm Custom ball and rod Colour Dimensions 434F4 Chrome A=470 mm 434F4=7 Black The custom ball and rod is intended for the custom fabrication of S.T.S. mounting kits. An S.T.S. mounting kit can fabricate precisely according to the needs of the patient by bending and rounding it off. Use the 711S6 bending tool for adapting it. Seating and positioning accessories Ottobock 15
Thoracic supports Bending tool 711S6 The bending tool makes it possible to design a custom-made mounting kit for S.T.S. or B.T.S. supports. S.T.S. clamp, single Tube diameter Colour 434H1=3/4 19.0 mm Silver 434H1=7/8 22.2 mm Silver 434H1=1 25.0 mm Silver 434H1=3/4-7 19.0 mm Black 434H1=7/8-7 22.2 mm Black 434H1=1-7 25.0 mm Black These clamps can be installed on the wheelchair without any modifications. For Ottobock wheelchairs, you require S.T.S. clamps for a tube diameter of 25 mm. S. T. S. clamp, small, individual Tube diameter Colour 477D52=SK033 3/4"=19.0 mm Silver 477D52=SK039 7/8"=22.2 mm Silver 477D52=SK027 1"=25.0 mm Silver 477D52=SK036 3/4"=19.0 mm Black 477D52=SK042 7/8"=22.2 mm Black 477D52=SK030 1"=25.0 mm Black These small clamps are particularly suitable for small wheelchairs or wheelchairs with low back height. Front mount Colour 434H4=7042 Grey 434H4=7 Black The front mount is suitable for installing S.T.S. mounting kits on standard wheelchairs with screwed back upholstery or on fixed back, including custom, systems / seating shells. 16 Ottobock Seating and positioning accessories
Seating and positioning accessories Ottobock 17 2
Arm supports 3
Arm supports Arm and hand supports Channel forearm support Size 436A2=3-7 (small) L=205 mm, B=105 mm, D=40 mm, T=25 mm 436A2=2-7 (medium) L=290 mm, B=120 mm, D=45 mm, T=25 mm 436A2=1-7 (large) L=355 mm, B=120 mm, D=45 mm, T=25 mm Channel forearm support, one-piece Size 436A3=2-7 L 460=mm, B=120 mm, D=45 mm, T=25 mm Hand support, flat 436P5=1-7 436P5=2-7 Size L=230 mm, B=140 mm L=180 mm, B=115 mm The hand support can be installed in combination with the Ottobock modular forearm supports. If a particular type of hand support is not required, flat hand support may be beneficial. They should also be used as the basis for custom fabrication. Since the modular hand supports are offered in various versions, a therapist or technician can decide which design best meets the patient s needs. A set of straps with hook-and-loop closures can be combined with the channel forearm supports. The hand supports are made of polyurethane foam. 20 Ottobock Seating and positioning accessories
3 Hand pads, palm extensor Mounting side Size 436P2=L1-7 Left L=235 mm, B=165 mm 436P2=R1-7 Right 436P2=L2-7 Left L=205 mm, B=145 mm 436P2=R2-7 Right Hand support, horn type Mounting side Size 436P3=L1-7 (large) Left L=190 mm, B=145 mm, 436P3=R1-7 (large) Right D=90 mm 436P3=L2-7 (small) Left L=180 mm, B=130 mm, 436P3=R2-7 (small) Right D=80 mm Hand support, cone type Mounting side Size 436P4=L1-7 (large) Left L=200 mm, B=130 mm, 436P4=R1-7 (large) Right D=90 mm 436P4=L2-7 (small) Left L=200 mm, B=130 mm, 436P4=R2-7 (small) Right D=70 mm Bending the connection rod makes plantar flexion or dorsiflexion possible. Seating and positioning accessories Ottobock 21
Arm supports Wheelchair arm support Size 436A4=1-7 (standard) A=360 mm, B=60 mm 436A4=2-7 (desk) A=260 mm, B=60 mm The arm supports were designed to replace damaged or unsuitable arm support on standard wheelchairs. They are easy to interchange, and can be supplied in two sizes. The standard length can be attached to wheelchair arm supports with a distance of 225 mm between bore holes; the Desk arm support can be used for a distance of 85 mm between bore holes. Side panel arm support 436A33=1-7 Size L=360 mm, B=90 mm, H=200 mm The arm supports with side panels have a wide surface with continuous panels for additional comfort. They were designed to replace standard wheelchair arm support with a distance of 225 mm between bore holes. Rounded armrest 436A5=1-7 (standard) 436A5=2-7 (desk) Size A=360 mm, B=70 mm A=260 mm, B=70 mm Compared to the standard arm support, the rounded arm support has an improved contour and rounded surfaces. Both sizes can be easily installed on standard arm support. Standard and Desk arm support can be installed on arm support with a distance of 225 mm or 85 mm between bore holes, respectively. 22 Ottobock Seating and positioning accessories
3 Arm support 481E09=SK012 481E09=SK013 Size A=270 mm, B=55 mm A=235 mm, B=55 mm Adjustment plate 436H1=7 The adjustment plate makes possible the axial adjustment of the entire modular arm support unit. It can be shifted approx. 30 mm to the right or left. Seating and positioning accessories Ottobock 23
Arm supports Mounting options Holder for swivel unit 481E45=LK140 481E45=RK140 481E61=LK140 481E61=RK140 481E64=LK052 481E64=RK052 Mounting side Left Right Left Right Left Right This component is needed in order to mount the swivel unit for the channel forearm support to the following Desk side panels: 481E45=PK052/PK054/PK064/PK090/PK100/PK110/PK119/PK120 481E61=PK001 481E64=PK009/PK010/PK064/PK065/PK209/PK210/PK264/PK265 Swivel unit for channel forearm support Tube diameter Colour 476E52=SK010 19 mm Silver 476E52=SK015 19 mm Black 476E52=SK020 20 mm Silver 476E52=SK025 20 mm Black 476E52=SK030 22.2 mm Silver 476E52=SK035 22.2 mm Black 476E52=SK040 25.4 mm Silver 476E52=SK045 25.4 mm Black The forearm angle adjustment unit allows settings of 0, 12.5, and 25. Two horizontal adjustment functions are available: a) Continuous adjustment; the locking pin is lifted and rotated by 180. b) In increments of approximately 15 ; the locking pin must be in the locking position. This swivel unit is compatible with all Ottobock modular channel forearm supports. The swivel unit can be mounted on the left or right side of the wheelchair. It is supplied ready for right-hand installation. With some minor adjustments, it can be installed on the left side. Attention: Using the swivel unit increases the height of the arm support by approximately 30 mm. In order to compensate for this, install a height-adjustable arm support. For the Avantgarde Desk side panel, a swivel unit for a tube diameter of 19 mm is required. A tube diameter of 20 mm is required for the Start series. 24 Ottobock Seating and positioning accessories
3 Trays (for manual wheelchairs and seating shell mobility bases) Size Adjustable width 481E00=SK260 1, complete 380 473 mm 481E00=SK270 2, complete 440 533 mm 481E00=SK280 3, complete 500 593 mm 481E00=SK290 4, complete 560 653 mm 481E00=SK300 5, complete 620 713 mm Seating and positioning accessories Ottobock 25
Leg supports 4
Leg supports Calf supports and mounting accessories Calf support Size Weight 440P2=1-7 W=170 mm, H=230 mm 550 560 g 440P1=1-7 W=170 mm, H=230 mm 630 640 g The calf support can be attached to any wheelchair with S.T.S. clamps (434H1) and a mounting kit (434F3). The advantage of this system is that the calf plates can be turned forwards and backwards. The calf plates are anatomically shaped, well padded, and very comfortable. S.T.S. mounting kit, offset Size Colour Dimensions 434F3=L 434F3=R 434F3=L-7 434F3=R-7 Left Right Left Right Chrome Black A=110 mm, B=95 mm, C=45 mm S.T.S. clamp, single Tube diameter Colour 434H1=3/4 19.0 mm Silver 434H1=7/8 22.2 mm Silver 434H1=1 25.0 mm Silver 434H1=3/4-7 19.0 mm Black 434H1=7/8-7 22.2 mm Black 434H1=1-7 25.0 mm Black These clamps can be installed on the wheelchair without any modifications. For Ottobock wheelchairs, you require S.T.S. clamps for a tube diameter of 25 mm. 28 Ottobock Seating and positioning accessories
4 Foot sandals The foot sandals offer comfortable, secure support. They can be used for seating systems or wheelchairs. On standard wheelchairs, the foot sandals are installed directly onto the existing footplate. The foot sandals consist of an ABS shell and a soft PU foam pad. The pad and foot sandals are ordered separately. Ottobock offers the foot sandals in two sizes (large and medium); both have an angle of 90. Foot sandal, consisting of foot bucket and pad (PU foam) Size 440R9=1-7 (large) A=325 mm, B=255 mm, C=185 mm 440R9=2-7 (medium) A=220 mm, B=255 mm, C=150 mm Pad (PU foam) 440C2=1-7 (large) 440C2=2-7 (medium) Size A=325 mm, B=255 mm, C=185 mm A=220 mm, B=255 mm, C=150 mm Seating and positioning accessories Ottobock 29
Leg supports Foot strap and foot caps Foot strap* Size Length 476P52=SK030 XS 155 200 mm 476P52=SK031 S 160 215 mm 476P52=SK032 M 175 230 mm 476P52=SK033 L 240 295 mm 476P52=SK034 XL 295 340 mm *Pair Support an optimal sitting position, improves foot position and provide relief for the ankle joint. Foot caps Size Dimensions Sole thickness Edge height (rear) Allowable body weight 476B52=SK010 S 190 x 89 mm 10 mm 35 mm 75 kg 476B52=SK015 M 230 x 114 mm 10 mm 40 mm 125 kg 476B52=SK020 L 255 x 140 mm 10 mm 45 mm 180 kg The foot caps provide security and stability. They are easy to install and work together with all wheelchairs and mobility bases. The length adjustable hook-and-loop belts allow them to be adjusted to a wide range of foot sizes. A patented mechanism to hold the belts open helps make transfers easier. An anti-slip surface helps maintain positioning. 30 Ottobock Seating and positioning accessories
Seating and positioning accessories Ottobock 31 4
Seats and seating systems, back systems 5
Seats and seating systems, back systems Seat cushions Cloud Floam Line Adjustable postural management and pressure redistribution Advantages Excellent pressure redistribution over bony prominences, including trochanters for those at high risk of pressure ulcers Individual Floam cells ensure a high level of stability, e.g. for transfers Easy adjustment for postural deformity, e.g. pelvic obliquity Characteristics Modular construction of up to 30 Floam cells, dependent on size A combination of Floam cells with low, medium and high fill enables individual configuration for individual postural needs Additional / replacement Floam cells available individually Available in sizes 300 x 300 mm (9 Floam cells) to 580 x 400 mm (30 Floam cells) Foam base with waterproof cover included for additional protection 250 kg user weight limit Weight: 3.2 kg (400 x 400 mm) Seat cushion thickness: 110 mm Water-resistant multistretch Dartex outer cover 476C00=FFC*, e.g. 476C00=FFC15 15 Cushion width (mm) 300 350 380 400 420 430 440 460 Seat width (mm) 290 320 340 360 370 390 390 410 410 430 420 440 430 450 450 470 Cushion depth (mm) 300 290 320 12 x 12* 350 340 370 14 x 14* Seat depth (mm) 380 370 400 15 x 15 400 380 420 14 x 16 15 x 16 16 x 16 16.5 x 16 18 x 16 420 400 440 16 x 16.5 16.5 x 16.5 17.5 x 16.5 18 x 16.5 430 420 460 17 x 17 460 420 480 16 x 18 17 x 18 18 x 18 500 480 540 18 x 20 Cushion depth (mm) Cushion width (mm) 480 500 560 610 Seat width (mm) 460 500 480 540 520 600 570 650 300 290 320 350 340 370 Seat depth (mm) 380 370 400 400 380 420 20 x 16* 22 x 16* 24 x 16* 420 400 440 430 420 460 460 420 480 19 x 18 20 x 18 22 x 18* 500 480 540 22 x 20* * Special sizes pricing and delivery times on request. The assignment of the cushion sizes to the seat widths and depths of the wheelchairs is merely a recommendation. 34 Ottobock Seating and positioning accessories
5 Advantage Floam Line Adjustable pressure redistribution with stability for easy transfers Advantages Excellent, adjustable pressure redistribution in the ischial area for those at moderate to high risk of pressure ulcers Floam provides excellent shear reduction for additional skin protection Foam front and side sections ensure a high level of stability for active users during transfers Lighter weight for easy handling, e.g. during car transfers Lower profile (80 mm) making it suitable for both active users and the elderly Characteristics Modular construction of Floam cells in the ischial area of the cushion Additional / replacement Floam cells of different fill rates available individually Contoured front foam section with mild medial thigh support (abductor) Foam side supports Weight: 1.4 kg (400 x 400 mm) Seat cushion thickness: 80 mm 125 kg user weight limit Water-resistant multistretch Dartex outer cover 476C00=AC*, e.g. 476C00=AC14x14 Cushion width (mm) 350 380 400 420 430 440 460 Seat width (mm) 340 360 370 390 390 410 410 430 420 440 430 450 450 470 Cushion depth (mm) 350 Seat depth (mm) 330 360 14 x 14 380 370 400 15 x 15 400 380 420 14 x 16 15 x 16 16 x 16 16.5 x 16 18 x 16 420 400 440 16 x 16.5 16.5 x 16.5 17.5 x 16.5 18 x 16.5 460 440 480 16 x 18 17 x 18 18 x 18 476C00=SA300 special size min 305 x 305 mm / max 760 x 760 mm; pricing and delivery times on request Seating and positioning accessories Ottobock 35
Seats and seating systems, back systems Seat cushions Z-Flo Floam Line Low profil all-rounder Advantages Offers good pressure redistribution and shear protection across the entire top surface for those at risk of pressure ulcers Floam provides excellent shear reduction for additional skin protection Low profile (50 mm) making it an ideal upgrade from a standard wheelchair cushion Characteristics Floam pack covering the entire top surface Floam flow is controlled by carefully placed darts and baffles to maximise pressure redistribution Adjustable air base for individual adjustment / contouring 150 kg user weight limit Weight: 1.4 kg (400 x 400 mm) Seat cushion thickness: 50 70 mm Water-resistant multistretch Dartex outer cover 476C00=Z*, e.g. 476C00=Z15x16 Cushion width (mm) 380 400 420 460 500 Seat width (mm) 380 400 400 420 420 440 460 480 500 520 Cushion depth (mm) 400 Seat depth (mm) 380 400 15 x 16 16 x 16 18 x 16 420 400 420 16.5 x 16.5 18 x 16.5 460 440 460 16 x 18 18 x 18 20 x 18 36 Ottobock Seating and positioning accessories
Terra Flair Terra Line The ultimate in air flotation, with the stability and security of Rest Suspension foam Advantages Optimal pressure redistribution for those at high risk of pressure ulcers Shear protection in the ischial area for additional skin protection Excellent ride comfort due to the impact damping properties of Rest Suspension foam High level of stability due to the properties of the Rest Suspension foam and anatomical form of teh cushion Good postural support provided by the Rest Suspension trochanter support Characteristics 70 mm single vlave, 50 x 50 mm cells, ROHO adjustable air insert (300 x 240 mm) Constructed of Ottobock Rest Suspension foam technology available only from Ottobock: Elastically modified for excellent pressure redistribution Improved impact damping compared to standard foam More consistent performance over time Anatomically moulded profile 150 kg user weight limit Weight: 1.4 kg (400 x 400 mm) Water-resistant multistretch Dartex outer cover 476C00=SK*, e.g. 476C00=SK883 Cushion width (mm) 355 380 405 430 455 505 Seat width (mm) 350 370 380 390 400 410 420 430 440 470 480 520 Cushion depth (mm) 355 Seat depth (mm) 330 370 405 370 390 880* 876 871 883 873 886 430 400 420 879 888 889 880* 455 430 450 874 877 872 875 505 460 480 882 884 885 887 * Special size. The assignment of the cushion sizes to the seat widths and depths of the wheelchairs is merely a recommendation. Custom sizes available. Pricing and delivery times on request. Seating and positioning accessories Ottobock 37
Seats and seating systems, back systems Seat cushions Terra Aquos Terra Line Cushioning and shear reduction for a smoother ride Advantages Effective pressure redistribution for those at moderate risk of pressure ulcers Shear protection for additional skin protection Excellent ride comfort due to the impact damping properties of Rest Suspension foam High level of stability due to the properties of Rest Suspension foam and anatomical form of the cushion Good postural support provided by the anatomical shape of the cushion Characteristics Four LiqiCell inserts for micro-shear reduction during natural movements and transfers Constructed of Ottobock Rest Suspension foam technology available only from Ottobock: Elastically modified for excellent pressure redistributon Improved impact damping compared to standard foams Anatomically moulded profile Weight: 1.2 kg (400 x 400 mm) Seat cushion thickness: 70 mm Water-resistant multistretch Dartex outer cover 150 kg user weight limit 476C00=SK*, e.g. 476C00=SK651 Cushion width (mm) 355 380 405 430 455 505 Seat width (mm) 350 370 380 390 400 410 420 430 440 470 480 520 Cushion depth (mm) 355 Seat depth (mm) 340 360 681 405 370 390 658 656 651 683 653 686 430 400 420 690 688 689 660* 455 430 450 654 657 652 655 505 460 480 682 684 685 687 * Special size. The assignment of the cushion sizes to the seat widths and depths of the wheelchairs is merely a recommendation. Custom sizes available. Pricing and delivery times on request. 38 Ottobock Seating and positioning accessories
5 Terra Terra Line Cushioning for a smoother ride Advantages Effective pressure redistribution for those at moderate risk of pressure ulcers Excellent ride comfort due to the impact damping properties of Rest Suspension foam High level of stability due to the properties of the Rest Suspension foam and anatomical form of the cushion Good postrual support provided by the anatomical shape of the cushion Characteristics Constructed of Ottobock, Rest Suspension foam technology provides: Elastically modified for excellent pressure redistribution Improved impact damping compared to standard foams Anatomically moulded profile: Ischial loading area Weight: 1.0 kg (400 x 400 mm) 150 kg user weight limit Water-resistant multistretch Dartex outer cover 476C00=SK*, e.g. 476C00=SK606 Cushion width (mm) 355 380 405 430 455 505 Seat width (mm) 350 370 380 390 400 410 420 430 440 470 480 520 Cushion depth (mm) 355 Seat depth (mm) 340 360 631 405 370 390 608 606 601 633 603 636 430 400 420 640 638 639 620* 455 430 450 604 607 602 605 505 460 480 632 634 635 637 * Special size. The assignment of the cushion sizes to the seat widths and depths of the wheelchairs is merely a recommendation. Custom sizes available. Pricing and delivery times on request. Seating and positioning accessories Ottobock 39
Seats and seating systems, back systems Seat cushions Evolight Comfort Line Combining improved microclimate with comfort Advantages Improved pressure redistribution due to the castellated structure Optimised microclimate due to the combined breathability of the spacer insert and spacer fabric outer cover Low profile making it ideal for foot propellers Characteristics High density, 60 mm, high-resilience foam cushion Castellated top surface, with gaps between each cell to optimise cell movement Spacer material insert for improved air flow Rounded shape at the back of the cushion to match form of a canvas wheelchair back support Weight: 0.85 kg (400 x 400mm) Saet cushion thickness: 60 mm 125 kg user weight limit Spacer fabric outer cover 476C00=SK350 Seat width (mm) 260 280 300 320 340 360 380 400 420 440 460 480 500 520 540 560 580 600 610 620 280 300 320 340 360 Seat depth (mm) 380 400 420 440 460 480 500 520 540 560 Standard sizes Custom sizes available, pricing and delivery times on request 40 Ottobock Seating and positioning accessories
5 ConturGel Comfort Line Ramped cushion for additional stability Advantages Ramped shape helps to reduce forward sliding Ideal for sacral sitters (posterior pelvic tilt, e.g. for the elderly Cushion s shape provides lateral stability Characteristics Ramped cushion shape Shapes to include lateral and medial thigh positioning Top surface layer of TechnoGel designed to minimise shear forces Seat cushion thickness: front 100 mm, rear 60 mm Weight: 1.1 kg (400 x 400 mm) 150 kg user weight limit Washable fabric cover 476C00=SK300 Seat width (mm) 280 300 320 340 360 380 400 420 440 460 280 300 320 Seat depth (mm) 340 360 380 400 420 440 460 480 Standard sizes Seating and positioning accessories Ottobock 41
Seats and seating systems, back systems Seat cushions Cubic Foam Comfort Line Entry level pressure redistribution Advantages Improved pressure redistribution and shear reduction due to the castellated structure Low profile making it ideal for foot propellers Characteristics High-density, 50 mm, high-resilience foam cushion Castellated top surface, with gaps between each cell to optimise cell movement Lightweight Weight: 0.65 kg (400 x 400 mm) Seat cushion thickness: 50 mm 150 kg user weight limit Water-resistant multistretch Dartex outer cover 476C00=SK100 Seat width (mm) 260 280 300 320 340 360 380 400 420 440 460 480 500 520 540 560 580 600 280 300 320 340 Seat depth (mm) 360 380 400 420 440 460 480 500 520 540 Standard sizes Custom sizes available, pricing and delivery times on request 42 Ottobock Seating and positioning accessories
5 Incontinence covers* 476C00=SK450 476C00=SK451 476C00=SK452 476C00=SK453 476C00=SK454 476C00=SK455 476C00=SK456 476C00=SK457 476C00=SK458 476C00=SK459 476C00=SK460 476C00=SK461 476C00=SK462 476C00=SK463 476C00=SK464 476C00=SK465 476C00=SK466 476C00=SK467 476C00=SK468 Dimensions (seat width seat depth) 355 x 405 mm 380 x 405 mm 405 x 405 mm 405 x 455 mm 430 x 455 mm 455 x 405 mm 455 x 455 mm 505 x 455 mm 405 x 430 mm 430 x 430 mm 455 x 430 mm 355 x 355 mm 405 x 505 mm 430 x 405 mm 430 x 505 mm 455 x 505 mm 505 x 405 mm 505 x 505 mm 580 x 580 mm (only in combination with Contour Seat) * The selection is designed to fit Terra, Terra Aquos and Terra Flair models. It fits under all textile covers, directly around the foam. Seating and positioning accessories Ottobock 43
Seats and seating systems, back systems Back support systems Baxx AL & AFT Baxx Line Comfort, stability and easy handling Baxx AL Series: Scapular cut out Baxx AFT Series: for more postural stability Benefits Back shell available in a broad range of frame colours Ergonomically shaped, rigid aluminium back support shell for high stability Large cut outs result in a lower weight and simplified handling Back is padded at the top for comfortable sitting for everyday activities Various heights and contours to enable individual adaption to the needs of the user Features Aluminium back in 5 heights and 3 different contour depths Back pad s 4D spacer fabric, breathable, dirt repellent Options Baxx AL & AFT 4 different mounting kits Removable (Basic Release / Quick Release) Fixed (2-Point Pro / 4-Point Pro) 2 different lateral brackets Swing away with lateral pads (size S / M / L / XL) Fixed with lateral pads (size S / M / L / XL) Zipped draft protection (dignity flap) that fits between the base of the back support and the wheelchair seat Loop handle More detailed information about Baxx line are available in the Baxx line brochure (646D1165=EN). Back width 250 mm 280 mm 310 mm 330 mm 360 mm 380 mm 410 mm 430 mm 460 mm 480 mm 510 mm low Contour 250 mm active: 64 mm deep: 100 mm active: 64 mm deep: 100 mm medium 330 mm Baxx Back height standard 410 mm tall 460 mm Xtall 510 mm active: 64 mm deep: 100 mm active: 64 mm deep: 100 mm active: 64 mm deep: 100 mm active: 64 mm deep: 100 mm active: 64 mm deep: 100 mm extra deep: 150 mm active: 64 mm deep: 100 mm extra deep: 150 mm active: 64 mm deep: 100 mm extra deep: 150 mm active: 64 mm deep: 100 mm extra deep: 150 mm active: 64 mm deep: 100 mm extra deep: 150 mm 44 Ottobock Seating and positioning accessories
5 Backster 481D00=SK640 481D00=SK644 481D00=SK648 Seat width 380 420 mm 420 460 mm 460 500 mm Please note the following reduction in seat depth: 5 / 30 mm, 10 / 50 mm, 15 / 70 mm. Lightweight, breathable back system Removable with one hand for folding the wheelchair Various foam components for individual adaptation of posture support Backster supports 481D00=LK695 481D00=RK695 481D00=SK661 481D00=SK662 481D00=SK663 Swing-away support, left Swing-away support, right Lateral / lumbar support set size S Lateral / lumbar support set, size M Lateral / lumbar support set, size L 481D00=SK685 481D00=SK686 Fixed support, small Fixed support, large 481D00=SV710 Back extension Seating and positioning accessories Ottobock 45
Seats and seating systems, back systems Adjustable seat plate The adjustable seat plate improves the wheelchair user s sitting position. It provides a solid, stable base for a wheelchair seat cushion. It eliminates the potential for sagging, which may occur with conventional seat upholsteries. The seat height and the inclination angle can be adjusted with the adjustable seat plate. Not available with the Avantgarde CS, CLT and CV. Matching wheelchair seat width Length of the plate Seat depth Possible seat cushion length Seat height adjustment** Inclination angle 476C01=DS14-18* 400 500 mm 445 mm 420 460 mm 380 510 mm -50 to +35 mm approx. 11 * A large seat width may require an additional firm seat plate and more space ** Dependent on crossbrace design Seating shell adapter Adapter type Dimensions Load capacity Trapezoid adapter HR32043590 Width: 235 mm, depth: 220 mm 75 kg Parallel seating shell adapter, small HR32046700 Width: 235 mm, depth: 175 mm 75 kg Parallel seating shell adapter, large HR32046800 Width: 275 mm, depth: 220 mm 110 kg Adapter for manual wheelchairs* HR22617100 280 360 mm Adapter for manual wheelchairs* HR22627100 380 520 mm * Not with Avantgarde CS, CLT, CV Wheelchair connection module Seat width 442F2=34 240, 290, 340 mm 442F2=44 390, 440 mm Use this connection module for mounting foamed Shape cushions with a frame on to a wheelchair. Suitable for a tube with a diameter of 22.2 and 25 mm. The angle of the connection module can be adjusted by changing the front hooks. Easily accessible snap locks make it quick to remove. Thus, the wheelchair remains collapsible. 46 Ottobock Seating and positioning accessories
5 Mounting kit for seat plate 442H3 The seat plate (442Q1=1) is angle-adjustable. Instead of the above-mentioned module, using the mounting kit makes it possible to fasten a plastic plate or a 10 mm thick plywood plate to wheelchairs with a tube diameter of 22.2 or 25 mm. Seat plate Size 442Q1=1 W=400 mm, L=390 mm In combination with 442H3 mounting kit. 10 mm plywood plate. Abductor 446C1=1-7 Size A=135 mm, B=100 mm, C=100 mm In combination with the mounting kit, the abductor can be pushed down by pressing the pushbutton. It can only be attached to firm seat frames or seat plates. Mounting kit for abductor 476N52=SK001 Seating and positioning accessories Ottobock 47
Belts and belt systems 6
Belts and belt systems Chest / shoulder belts It is recommended that when using an upper body positioning harness always use a correctly applied positioning lab belt to stabilize the pelvis. A Chest-shoulder pad* Size Dimensions E D B A B C D E 476P52=SK015 S 225 mm 270 mm 130 mm 60 mm 130 mm 476P52=SK016 M 255 mm 330 mm 155 mm 60 mm 150 mm C 476P52=SK017 L 260 mm 460 mm 200 mm 60 mm 200 mm Contoured pads for improved support and fitting for the user. The midsection supports the upper body and holds it in an upright position. A Slimline sternum strap* Size Dimensions E D B A B C D E 476P52=SK025 S 230 mm 410 mm 170 mm 30 mm 140 mm 476P52=SK026 M 250 mm 470 mm 190 mm 30 mm 160 mm C 476P52=SK027 L 260 mm 520 mm 200 mm 30 mm 180 mm The belt has a slim contour, offering greater flexibility for adjustment to the user. A D C B Dynamic belt* Size Dimensions A B C D 476P52=SK010 S 110 mm 180 mm 160 mm 45 mm 476P52=SK011 M 145 mm 230 mm 200 mm 50 mm 476P52=SK012 L 175 mm 260 mm 230 mm 60 mm Optimal support for positioning. C B A Shoulder belt* Size Dimensions A B C 476P52=SK020 S 300 mm 95 mm 45 mm 476P52=SK021 M 330 mm 115 mm 65 mm 476P52=SK022 L 430 mm 145 mm 75 mm Distributes pressure across chest and shoulder, quick-release fastener in the middle. * Installation only in combination with wheelchair mounting kit: 476D52=SK090/091 and clamp fitting kit 476D52=SK095. 50 Ottobock Seating and positioning accessories
6 Wheelchair mounting kit* Size 476D52=SK090 476D52=SK091 Clamp fitting kit* 476D52=SK095 380 510 mm 260 360 mm * Only required in combination with chest / shoulder belts 476P52=SK010/SK011/SK012, 476P52=SK015/SK016/SK017 and 476P52=SK020/SK021/ SK022 Wheelchair mounting kit for attaching the upper straps of the positioning system for the upper body, to fit wheelchair widths of 260 510 mm. Clamp fitting kit / holder to fit 22 mm and 25 mm back tube diameter C D B A Sternum harness Size Dimensions A B C D Colour 473K00=SK020 1 240 mm 180 mm 95 mm 90 mm Blue, Red, Black 473K00=SK021 2 335 mm 210 mm 190 mm 155 mm Blue, Red, Black 473K00=SK022 3 405 mm 260 mm 225 mm 160 mm Blue, Red, Black The sternum harness out of durable nylon support upper body positioning in seat systems. Four-way chest strap kit with snap buckle 434S7=1.5-7 Size 38 mm The four-way chest strap kit consists of four 35 mm wide straps that are connected with each other by a four-way snap buckle. This makes it easy to quickly detach them from each other. This strap kit can be used in connection with standard wheelchairs and Ottobock seating systems. You must be sure that the back part of the wheelchair is high enough that the mounting points for the shoulder straps are not too low. The length of the belt can be customised. D C A B Safety Jacket* Size Dimensions Colour 473K00=SK027 1 A 330 mm, B 300 mm, C 100 mm, D 120 mm 473K00=SK028 2 A 380 mm, B 390 mm, C 115 mm, D 150 mm Blue, Red, Black 473K00=SK029 3 A 420 mm, B 450 mm, C 130 mm, D 165 mm The positioning vest fits close to the body to support trunk stabilization in seating systems. A midline zipper or shoulder buckles allow for easy opening or closing. The positioning vest doesn t offer a pelvis support. Seating and positioning accessories Ottobock 51
Belts and belt systems Leckey Leeway upper body harnesses The new, colourful Leckey Leeway upper body harnesses (butterfly and H-harnesses) combine the necessary support for children and youths with an appealing design. Thanks to quick closures, they are easy to take off and can be combined with various seating systems. (Squiggles seating system, Mygo seating system, Mygo MAX and Kit seating system.) The high-quality materials made of reinforced jean fabric are robust and washable (machine wash at 40 ). Leckey Leeway butterfly harness Colour / motif Size Dimensions 415K140=SK101 Blue dragon S A=270 mm, B=260 mm, C=185 mm, D=220 mm 415K140=SK102 Blue dragon M A=305 mm, B=310 mm, C=210 mm, D=260 mm 415K140=SK103 Blue dragon L A=335 mm, B=345 mm, C=250 mm, D=310 mm 415K140=SK111 Pink butterfly S A=270 mm, B=260 mm, C=185 mm, D=220 mm 415K140=SK112 Pink butterfly M A=305 mm, B=310 mm, C=210 mm, D=260 mm 415K140=SK113 Pink butterfly L A=335 mm, B=345 mm, C=250 mm, D=310 mm 415K140=SK121 Green gecko S A=270 mm, B=260 mm, C=185 mm, D=220 mm 415K140=SK122 Green gecko M A=305 mm, B=310 mm, C=210 mm, D=260 mm 415K140=SK123 Green gecko L A=335 mm, B=345 mm, C=250 mm, D=310 mm 415K140=SK131 Orange heart S A=270 mm, B=260 mm, C=185 mm, D=220 mm 415K140=SK132 Orange heart M A=305 mm, B=310 mm, C=210 mm, D=260 mm 415K140=SK133 Orange heart L A=335 mm, B=345 mm, C=250 mm, D=310 mm Leckey Leeway H-harness Colour / motif Size Dimensions 415K140=SK141 Blue dragon S A=115 mm, B=370 mm, C=80 mm 415K140=SK142 Blue dragon M A=120 mm, B=385 mm, C=80 mm 415K140=SK143 Blue dragon L A=135 mm, B=435 mm, C=90 mm 415K140=SK151 Pink butterfly S A=115 mm, B=370 mm, C=80 mm 415K140=SK152 Pink butterfly M A=120 mm, B=385 mm, C=80 mm 415K140=SK153 Pink butterfly L A=135 mm, B=435 mm, C=90 mm 415K140=SK161 Green gecko S A=115 mm, B=370 mm, C=80 mm 415K140=SK162 Green gecko M A=120 mm, B=385 mm, C=80 mm 415K140=SK163 Green gecko L A=135 mm, B=435 mm, C=90 mm 415K140=SK171 Orange heart S A=115 mm, B=370 mm, C=80 mm 415K140=SK172 Orange heart M A=120 mm, B=385 mm, C=80 mm 415K140=SK173 Orange heart L A=135 mm, B=435 mm, C=90 mm 52 Ottobock Seating and positioning accessories
6 Positioning belts 2-point lap belt plastic snap buckle, adaptation on both sides 4-point lap belt plastic snap buckle, adaptation on both sides Dimensions Dimensions 476P52=SK004 40 mm wide, 2 m long 476P52=SK003 40 mm wide, 2 m long 2-point lap belt metal pushbutton, adaptation on one side 4-point lap belt metal pushbutton, adaptation on one side Dimensions Dimensions 476P52=SK002 40 mm wide, 2 m long 476P52=SK001 40 mm wide, 2 m long 2-point children s lap belt plastic snap buckle, adaptation on both sides 4-point children s lap belt plastic snap buckle, adaptation on both sides Dimensions Dimensions 476P52=SK006 25 mm wide, 1 m long 476P52=SK005 25 mm wide, 1 m long C A B Groin strap Size Dimensions Colour 473N00=SK012 1 A 225 mm, B 90 mm, C 235 mm 473N00=SK013 2 A 255 mm, B 125 mm, C 285 mm Blue, Red, Black 473N00=SK014 3 A 290 mm, B 175 mm, C 320 mm Supports the pelvis in seating systems and therapy chairs. The patient sits on the seat surface and the leg belts run from the inside to the outside of the thighs. Seating and positioning accessories Ottobock 53
Belts and belt systems Leckey Leeway wrap-around lap belt Colour Size Hip circumference (min. / max.) Hip width (min. / max.) 415C140=SK001 Blue 1 600 / 800 mm 250 / 350 mm 415C140=SK002 Blue 2 700 / 950 mm 300 / 400 mm 415C140=SK003 Blue 3 850 / 1100 mm 350 / 450 mm 415C140=SK004 Blue 4 950 / 1300 mm 400 / 500 mm 415C140=SK011 Grey 1 600 / 800 mm 250 / 350 mm 415C140=SK012 Grey 2 700 / 950 mm 300 / 400 mm 415C140=SK013 Grey 3 850 / 1100 mm 350 / 450 mm 415C140=SK014 Grey 4 950 / 1300 mm 400 / 500 mm Pelvis positioning aid for wheelchairs and other sitting aids, suitable for age 4 and up. Available in 4 sizes and 2 colours (Blue, Grey). Accessories, optional: fast mounting kit, seat plate mounting kit, seat cushion strap Lap belt with pushbutton Size Seat width 446B10=1.5-7 40 mm 320 360 mm 446B10=2-7 50 mm 320 440 mm 481C17=SK030 50 mm 220 360 mm 481C08=SK070 50 mm 460 620 mm Designed with metal pushbutton buckle (car safety lock) Lap belt with snap buckle Size Seat width 446B1=1.5-7 35 mm 320 360 mm 446B1=2-7 50 mm 320 440 mm 481C17=SK020 50 mm 220 360 mm 481C08=SK079 50 mm 460 620 mm Version with plastic buckle 54 Ottobock Seating and positioning accessories
Seating and positioning accessories Ottobock 55 6
With compliments: Trademarks All product names mentioned in this document are subject without restriction to the respective applicable trademark laws and are the property of the respective owners. All brands, trade names or company names mentioned herein may be registered trademarks and are the property of the respective owners. Should trademarks used in this document fail to be explicitly identified as such, this does not justify the conclusion that the denotation in question is free of third-party rights. Distribution Otto Bock Mobility Solutions GmbH Lindenstraße 13 07426 Königsee-Rottenbach/Germany www.ottobock.com Ottobock 646K12=GB-03-1604 Technical changes and printing errors reserved. Options include. Responsible for the content: Otto Bock Mobility Solutions GmbH