HIGH PERFORMANCE AND PATENTED RACK AND PINION ACTUATOR

HIGH PERFORMANCE AND PATENTED RACK AND PINION ACTUATOR

RACK AND PINION ACTUATOR INVOLUT - TEETH Patent Applied PATENTED TEETH QTF PATENTED TOOTH CONVENTIONAL TOOTH PATENTED special tooth profile with dual involute helps smooth rolling, low wear, minimal play helps in improving control operations Large teeth size helps actuator to take larger loads Highly suitable for extreme cyclic loads Conventional actuators have 6 teeth as a teeth pinion design would normally cause interference. However, Rotex has successfully managed to develop and PATENT a unique teeth pinion without interference

SPRINGS Patent Applied PATENTED TAPER SPRING PATENTED, concentric tapered springs with flower design and modular construction to generate optimum torque. Normally, the slim springs tend to buckle. Rotex constructed springs do not buckle and provide a stable output PATENTED, solid turns in the middle act like a guide. The guiding of the spring allows the actuator to work with minimal friction and hence gives it a long life A total of 4 springs are provided which would normally give 4 torque variations. However, Rotex designed Wond r Spring is a unique product which will help the actuator generate 8 torque variations 3

RACK AND PINION ACTUATOR RANGE OF RACK AND PINION ACTUATOR QTF ALUMINIUM 90 DEGREE Aluminium extruded, hard anodized 90 rotation, +5 / -7 Nm to 5000 Nm CTF CARBON STEEL 90 DEGREE WCB body, hard chrome bore 90 rotation, +5 / -7 Nm to 5000 Nm STF STAINLESS STEEL 90 DEGREE CF8M body 90 rotation, +5 / -7 Nm to 5000 Nm QSF 00% STROKE ADJUSTABLE Aluminium body, WCB covers 0 rotation, 00% stroke adjustable, only for outward stroke Nm to 5000 Nm ***-SUT 90 MECHANICAL 3 POSITION Available in QTF, CTF and STF 90 rotation, +5 / -7, 3rd position 0-45 fully adjustable Nm to 5000 Nm Fine and coarse control 4 Specifications are subject to change without notice

****-SUEL 90 OR ****-SUEL 80 ELECTRICAL 3 POSITION Available in QTF, CTF and STF 90 rotation, +5 / -7, 3rd position 00% adjustable by setting cam in limit switch Nm to 5000 Nm ***-80 ALUMINIUM 80- POSITION Available in QTF, CTF and STF 90 rotation, +5 / -7 0.5 Nm to 500 Nm ***-HR 80 0-90-80 DEGREE Available in QTF, CTF and STF 0-90-80, all position adjustable Fail safe pinion will return to 0 0.5 Nm to 500 Nm ***-HO 80-90-0-90 DEGREE Available in QTF, CTF and STF -90-0-90, all positions adjustable Fail safe pinion will return to 0 (Fail mid) 0.5 Nm to 500 Nm ***-Q 90 OR ***-Q 80 QUICK ACTING Available in QTF, CTF and STF Quick closing upto 0. Sec Large ports for quick exhaust Nm to 5000 Nm Specifications are subject to change without notice 5

RACK AND PINION ACTUATOR PATENTED TECHNOLOGY, NEW GENERATION, COMPACT EXTRUDED HARD ANODIZED... PATENTED teeth profile double rack and pinion construction Hard anodized body providing high corrosion resistance The piston bearings have unique lubrication retaining groove Maximum working pressure 8 bar, Special version for 3 bar available Additional lubrication is not required DOUBLE ACTING Temperature range NBR -0 C to +80 C, VITON -0 C to +5 C, Flourosilicon -60 C to +0 C Convertible to single acting by just adding springs Life more than million cycles, tested as per EN 574-3 Stopper cam can be reversed RACK AND PINION END STROKE (0-90 ) INTEGRAL KEY Teeth have dual involute profile for increased life Strong teeth for cyclic loads Can sustain opening and closing with impacts Hard anodized rack teeth for reduced wear 6 Setting the perfect opening and closing of the ball valve will ensure a long life of the ball valve seats Extremely important for pipe line pigging application +5 over travel setting possible for opening 7 Under traveling can be adjusted Integral strong Aluminium key provides firm locking of the pinion, eliminating lateral movement under operation It acts as a bearing for outward stroke and avoids interference of teeth

...ALUMINUM BODY DOUBLE RACK AND PINION ACTUATOR SERIES QTF PATENTED spring retainer construction PATENTED taper springs for compact and high performance Rotex developed Wond r Spring to give large combination of torques Springs are epoxy coated for corrosion resistance Modular spring construction permits large combination of spring torque Easy assembling & dismantling to change to various spring codes. SINGLE ACTING ISO PAD Valve mounting as per ISO 5 with an additional mounting of a higher size Standardisation of mounting accessories ISO centering ring for precise location Octagonal drive shaft for ease of mounting SPRING QTF 3-0 PATENTED conical spring for increased life High chrome material epoxy coated springs Modular spring set catering to various valve torque characteristics Non buckling modular spring design No special tools required to dismantle SPRING QTF 5-350 PATENTED guiding system for low buckling Unique 4 spring combination One Wond r Spring among 4 allows 7 torque variations in comparison to or 4 in conventional actuators Long guide in retainer avoids jerks and enhances the life 7

RACK AND PINION ACTUATOR STF STAINLESS STEEL ACTUATORS Double rack and pinion construction Body and covers from CF8M material for high corrosion resistance The pinion and pistons are supported on polyacetal bearings Maximum working pressure 8 bar Additional lubrication is not required Temperature range NBR -0 C to +80 C PE -40 C to 0 C Life more than million cycles Anti blow-out pinion Unique spring retainer construction Convertible to single acting just by adding springs CF8M BODY, COVER High grade CF8M castings Body bore honed for smooth finish and long life of seals No crevices for easy cleaning, avoiding bacterial growth INTERNALS All internals are direct replacement to QTF All the seals are common for QTF, STF Torques and spring ratings are as per the QTF chart PISTON WITH RACK Double rack and pinion construction Hard anodized pistons CF8M piston on request NBR as standard 8

CTF CARBON STEEL ACTUATOR Double rack and pinion construction (WCB) body Body and cover are from carbon steel material for high strength The pinion and pistons are supported on polyacetal bearings Maximum working pressure 8 bar Actuator body honed and hard chrome plated for long life and corrosion resistance Temperature range NBR -0 C to +80 C PE -40 C to 0 C Life more than million cycles Anti blow-out pinion Unique spring retainer construction Convertible to single acting just by adding springs WCB BODY, COVER High grade WCB casting Body bore honed chrome plated for smooth finish and long life of seals No crevices for easy cleaning, avoiding bacterial growth INTERNALS All internals are direct replacement to QTF All the seals are common for QTF, CTF and STF Springs & spring rating are as per the QTF chart PISTON WITH RACK Double rack and pinion construction Hard anodized pistons WCB/ CF8M piston on request NBR as standard 9

RACK AND PINION ACTUATOR Wid TM X SUPER SEAL Wid X seal for extremely long life Wid X grooves provides lubrication pockets for smooth operation Extremely low friction Life over 3 million cycles No additional lubrication needed APPLICATION PROPERTIES Wid X SEAL Available in NBR, VITON, Flourosilicon material Suitable for dry unlubricated air Hydraulic media up to 5 bar Extremely tolerant to dirt and dust Needs no proficiency for installation Flexible lip reduces friction and in turn the wear Special Rotex engineered seal instead of the standard quad seal Excellent response to control application with negligible stick-slip Seal can be replaced from O-ring to Wid X 0

ROTARY ACTUATOR CORROSION PROTECTION OPTIONS CTF CARBON STEEL ACTUATOR Body: Hard Anodized Aluminium: (Standard) Special Aluminium alloy is used as a base metal Hard Anodizing of Aluminium results in better corrosion protection, surface hardness and superior wear resistance 50 µm thickness of the controlled oxidized surface of the alloy comprises primarily of Aluminium trioxide (AlO 3) crystals along with Magnesium, Tungsten Oxides which make the surface chemically inert and extremely hard (in excess of 45º Rc) The surface can withstand all environmental oxidations including, those of saline, except strong alkaline by the surface (Refer the technical document for more information) The oxidized Aluminium base metal cannot be peeled, making it an extremely stable surface treatment Electroless Nickel Treatment: EN Nickel is deposited on the Aluminium surface by its chemical reaction on the body, which is hard anodized. This treatment covers the crevices including the threads and the passage hole making the surface absolutely nonporous and corrosion free. Superior corrosion resistance as compared to hard anodizing, makes this treatment a suitable choice for corrosive environments. Ideal for external wash. Epoxy Coated Actuator: CL The two pack epoxy coating is done on a hard anodized surface of the Aluminium body by the spray technique. It produces a 00mu thick layer (only external surfaces). This epoxy coating helps in protecting the actuator from extremely corrosive environments. Choose this option specially for alkaline environments. It is also suitable for environments like Ammonia, Ammonia Liquor etc. ROTEX guarantees 500 hrs. salt spray test. Colours : Blue, Green, Red, Yellow Pinion: Zinc Flake Plated: (Standard) Standard surface treatment given to the pinion shaft of Steel (EN 8). Adequate for most applications including corrosive environments. The square drive is machined to meet the close tolerances. Actuator Label -60-0-6 MODEL S. No. II GD T6 www.rotexautomation.com A B Max. Pr. 8 bar Seal Temp. USE IN ACCORDANCE WITH NBR -0 ºC to +80 ºC ATEX MANUAL Stainless Steel: 8M Optionally available for aggressive environments. Pinion can also be supplied in SS36. This label is used when the valve is not supplied by Rotex but only the top automation is supplied by Rotex -60-0-7 MODEL S. No. II GD T6 www.rotexautomation.com Max. Pr. 8 bar Seal Temp. USE IN ACCORDANCE WITH VALVE AUTOMATION SYSTEM NBR -0 ºC to +80 ºC ATEX MANUAL This label is used when the full on-off valve automation is done by Rotex

RACK AND PINION ACTUATOR DOUBLE ACTING TORQUE QTF/ CTF/ STF IN Nm 90 TORQUE Nm (0 Nm = kgm) MODEL 3 bar 4 bar 5 bar 6 bar 7 bar QTF 3 4 5 7 8 0 QTF 40 0 4 7 4 QTF 50 6 7 33 38 QTF 63 40 50 59 69 QTF 80 48 64 80 96 QTF 90 76 0 7 53 78 QTF 00 09 45 8 8 55 QTF 0 35 80 5 70 35 QTF 5 88 50 33 375 438 QTF 50 3 45 59 63 77 QTF 75 450 600 750 900 050 QTF 00 696 98 60 390 65 QTF 50 50 890 65 640 QTF 0 6 70 75 360 3800 QTF 350 90 90 3650 4380 50 DOUBLE ACTING TORQUE QTF/ CTF/ STF IN Nm 80 TORQUE Nm (0 Nm = kgm) MODEL 3 bar 4 bar 5 bar 6 bar 7 bar QTF 3 3 4 4 5 QTF 40 5 7 9 0 QTF 50 8 4 6 9 QTF 63 5 0 5 35 QTF 80 4 3 40 48 56 QTF 90 38 5 64 76 89 QTF 00 55 73 9 09 7 QTF 0 68 90 3 35 58 QTF 5 94 5 56 88 9 QTF 50 56 08 60 3 364 QTF 75 5 0 375 450 55 QTF 00 348 464 580 695 83 QTF 50 565 755 945 33 QTF 0 85 085 358 6 900 QTF 350 095 460 85 90 555

SINGLE ACTING TORQUE (QTF/ CTF/ STF) IN Nm SIZE QTF3 QTF40 QTF50 QTF63 QTF80 QTF90 QTF00 QTF0 QTF5 QTF50 QTF75 SET NO. SPRING 3 bar 4 bar 5 bar 6 bar Min. Max. Min. Max. Min. 6 3 3 4 5 4 5 7 3 4 - - 3 3 4 3 4 8 3 5 - - 4 4 5 5 8 3 5 6 9 0 3 6 6 5 8 5 6 8 9 5 7 6 0 4 4 7 7 4 8 8 - - 6 5 9 9 3 5 8 4 8 0 4 5 9 0 5 6 9 3 3 8 9 3 4 9 0 4 7 0 6 6 6 7 7 8 3 9 - - 3 9 8 5 4 0 5 5 8 5 7 5 7 35 37 45 6 5 4 6 4 6 4 6 34 36 44 7 9 8 3 3 4 8 3 35 - - 5 7 5 7 5 37 7 6 3 38 47 54 63 70 79 6 33 4 6 4 46 58 6 74 8 3 36 4 8 40 44 56 60 7 8 4 5 0 36 37 5 53 68 4 3 48 - - 6 3 3 48 48 64 6 37 56 - - 8 7 4 43 40 59 7 4 35 49 6 75 86 00 6 6 35 53 3 4 48 67 74 9 99 7 8 37 57 9 39 45 64 70 90 96 5 44 68 9 3 34 57 60 83 85 08 4 50 76 - - 5 5 5 77 76 0 6 58 89 - - 3 43 38 69 64 94 38 59 5 7 87 07 3 43 60 80 6 50 76 33 59 69 95 05 3 4 68 8 53 8 8 56 64 9 00 8 37 65 64 97 46 49 8 85 8 55 4 7 09 - - 36 74 7 0 09 46 6 84 7 - - 8 6 55 98 9 35 48 73 63 88 08 33 53 78 98 3 6 6 95 4 73 86 8 3 63 76 08 8 66 0 34 69 79 4 4 59 69 04 79 0 5 56 60 0 05 47 5 9 4 89 36 - - 45 9 90 36 35 8 6 04 58 - - 3 77 68 3 67 6W 63 98 90 5 5 87 5 50 77 3 8W 8 8 59 06 68 84 3 47 93 9 87 36 5 0 4 63 77 6 39 88 06 66 8 84 44 47 06 09 69 W 88 - - 6 4 9 87 55 3W 03 - - 47 0 09 8 7 45 6W 05 69 43 07 47 3 35 44 455 58 8W 37 9 74 95 78 99 38 403 486 9 45 34 78 66 8 70 86 374 390 478 78 86 6 34 38 34 34 338 446 W 0 35 - - 9 4 95 38 99 4 3W 8 350 - - 65 98 70 73 405 6W 45 38 3 5 363 455 53 605 663 755 8W 90 3 40 60 90 40 440 560 590 70 9 0 39 49 7 399 4 549 57 699 45 40 48 04 98 355 348 505 498 655 W 80 457 - - 43 3 93 47 443 6 3W 493 - - 07 99 57 449 407 599 Max. Min. Max. Min. Max. The above torque combinations are most commonly used. Contact ROTEX for other combinations to select most optimum actuator. SPRING MAX = Spring Start, SPRING MIN = Spring End 3

RACK AND PINION ACTUATOR SINGLE ACTING TORQUE (QTF/ CTF/ STF) IN Nm SIZE QTF00 QTF50 QTF0 QTF350 SET NO. SPRING 3 bar 4 bar 5 bar 6 bar Min. Max. Min. Max. The above torque combinations are most commonly used. Contact ROTEX for other combinations to select most optimum actuator. SPRING MAX = Spring Start, SPRING MIN = Spring End Min. Max. Min. Max. Min. Max. 33 5 37 36 446 558 678 790 9 03 43 54 359 59 67 337 400 569 63 80 864 034 57 367 546 5 39 383 56 65 794 847 06 74 46 68 6 36 48 468 48 700 73 93 79 533 790 - - 39 396 37 68 604 860 80 566 838 - - 9 363 33 595 555 88 33 348 584 548 784 95 6 539 680 96 54 495 8 638 680 05 057 39 434 770 57 5 858 74 6 65 999 09 376 406 754 74 656 096 36 476 43 853 79 3 68 608 79 744 48 - - 6 765 639 43 06 50 60 79 37 - - 8 78 560 095 937 473 33 570 850 779 060 3 603 865 46 409 689 54 79 8 449 839 99 38 535 95 078 468 57 8 8 40 807 945 350 488 894 03 437 74 038 549 80 59 63 35 66 678 70 79 89 776 - - 397 984 940 57 483 070 80 65 889 - - 83 908 87 45 370 994 33 785 5 0 387 745 470 836 394 3560 54 6 646 56 047 50 77 975 495 699 39 57 83 74 449 990 73 74 897 438 6 363 74 470 5 0 703 745 47 469 5 93 875 79 686 469 - - 48 5 935 877 659 80 80 634 - - 63 095 987 89 7 543 4

TECHNICAL INFORMATION QTF/ CTF/ STF AIR CONSUMPTION AIR CONSUMPTION (in litre A.N.R/ bar 90 STROKE) MODEL PISTON INWARD STROKE PISTON OUTWARD STROKE Litre/ bar Litre/ bar QTF3 0. 0.09 QTF40 0.0 0.0 QTF50 0.6 0.5 QTF63 0.43 0.7 QTF80 0.69 0.44 QTF90.5 0.7 QTF00.64.0 QTF0.94.4 QTF5 3.44.7 QTF50 5.8.88 QTF75 7.4 4. QTF00.76 6.80 QTF50 3.75 0.0 QTF0 3.50 6. QTF350 37.00 5.70 WEIGHT MODEL WEIGHT (in kg) DOUBLE ACTING SINGLE ACTING QTF3 0.8 0.9 QTF 40.3.5 QTF 50.7.0 QTF 63.3.8 QTF 80 3. 3.9 QTF 90 5. 6.5 QTF 00 7.3 9. QTF 0 8.3 0.6 QTF 5.7 5.4 QTF 50 7.0 5.7 QTF 75. 8.0 QTF 00 33.0 5.0 QTF 50 48.0 69.0 QTF 0 60.0.0 QTF 350 77.0 33.0 For double acting, the total air consumption is sum of inward & outward stroke air consumption. For single acting only outward stroke air consumption AIR CONSUMPTION WEIGHT AIR CONSUMPTION (in litre A.N.R/ bar 90 STROKE) MODEL PISTON INWARD STROKE Litre/ bar PISTON OUTWARD STROKE Litre/ bar CTF/STF 3 3E 0. 0.09 CTF/STF 40 40E 0.5 0. CTF/STF 50 50E 0.6 0.8 CTF/STF 63 63E 0.37 0.8 CTF/STF 80 80E 0.70 0.4 CTF/STF 90 90E.4 0.69 CTF/STF 00 00E.36 0.9 CTF/STF 0 0E.87.8 CTF/STF 5 5E.4.69 CTF/STF 50 50E 3.97.75 MODEL CTF/STF 3 CTF/STF 40 CTF/STF 50 CTF/STF 63 CTF/STF 80 CTF/STF 90 CTF/STF 00 CTF/STF 0 CTF/STF 5 CTF/STF 50 WEIGHT in kg. DOUBLE ACTING.76.53.90 4.4 5.6 8.4.79 6.0 9. 5.70 SINGLE ACTING.86.75 3. 4.50 6.3 0.0 3.80 8.40.80 9.70 CTF/STF 75 75E 5.45 4.70 CTF/STF 75 34.00 39.00 CTF/STF 00 00E.76 6.80 CTF/STF 00 69.00 87.00 CTF/STF 50 50E 3.75 0.0 CTF/STF 50 5.00 36.00 CTF/STF 0 0E 3.50 6. CTF/STF 0 45.00 95.00 CTF/STF 350 350E 37.00 5.70 CTF/STF 350 9.00 56.00 For double acting, the total air consumption is sum of Inward & outward stroke air consumption. For single acting only outward stroke air consumption 5

RACK AND PINION ACTUATOR TECHNICAL INFORMATION QTF/ CTF/ STF 6 SPRING SETS FOR QTF/ CTF/ STF 3-63 SPRING SET INNER SPRING OUTER SPRING 0 0 3 0 4 5 0 6 7 8 FOR QTF/ CTF/ STF 80-0 SPRING SET INNER SPRING MIDDLE SPRING OUTER SPRING 0 0 0 0 3 0 0 4 0 5 0 0 6 0 0 7 0 8 0 9 0 0 0 0 0 3 4 0 0 5 0 6 7 0 8 9 0 0 0 3 0 4 5 6 FOR QTF/ CTF/ STF 5-350 SPRING SET BLACK SPRING RED SPRING SPRING SET 0 W 0 W 3 3 0 3W 3 4 4 0 4W 4 5 5 0 5W 5 6 6 0 6W 6 7 7 0 BLACK SPRING 7W 7 8 8 0 8W 8 9 9 0 9W 9 0 0 0 0W 0 0 W 0 W 3 3 0 RED SPRING RED AND BLACK SPRING ALL BLACK SPRING

QTF ACTUATOR DOUBLE ACTING / SINGLE ACTING 90 AND 80 D DIMENSIONAL DETAILS 90 +95 R +83 M5X8 DEEP G S S T R VIEW FROM-'X' +7 0-5 ROTATION AND STROKE ADJUSTMENT M5 x 8 DEEP Ø6. N 'Y' M6 4 B 6 4 P C O VIEW FROM-'Y' L M 'X' 'A' V 45.0 W x Y DEEP ON 'Q'' PCD DEPTH-X 45.0 ZØ DETAIL Z ON REQUEST I H W x Y DEEP ON 'Q' PCD CH-90 CH-, 80 VIEW FROM-'Z' 'Z' ACTUATOR QTF3 QTF40 QTF50 QTF63 QTF80 QTF90 QTF00 QTF0 QTF5 QTF50 QTF75 QTF00 QTF50 QTF0 QTF350 QTF3E QTF40E QTF50E QTF63E QTF80E QTF90E QTF00E QTF0E QTF5E QTF50E QTF75E QTF00E QTF50E QTF0E QTF350E MODEL A 38 6 75 96 08 38 74 84 395 4 5 550 695 634 773 B 49 7 8 9 06 6 39 46 6 9 99 53 53 360 360 C 56 68 76 88 0 5 4 3 49 76 89 64 64 373 373 D 50 80 80 80 80 80 80 80 80 80 80 G 5 H 4 40 4 4 55 58 70 70 90 90 90 I 5 5 9 7 7 7 35 48 55 55 55 57 L 5 34 4 49 58 6 66 73 88 93 3 3 87 87 M 3 38 4 47 53 57 63 67 76 88 96 57 57 07 07 N A/F 8 4 5 5 3 6 36 4 55 55 55 55 O 0 4 6 0 0 7 33 36 4 48 60 60 60 60 P 0 0 0 0 0 0 0 0 0 0 Q 36 36 36 50 50 70 70 0 0 0 0 Q 50 50 70 70 70 0 0 5 5 5 40 40 65 65 FLANGE F03 F03 F03 F05 F05 F07 F07 F07 F0 F0 F0 F0 F4 F6 F6 FLANGE F05 F05 F07 F07 F0 F0 F F F F4 R 0 0 S 6 6 6 6 6 6 6 6 6 6 6 6 6.5.5 T /8" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /" /" CH-90 9 4 7 7 7 7 36 46 46 55 W M5 M5 M5 M6 M6 M8 M8 M0 M0 M0 M0 M0 Y 8 8 8 8 8 0 0 W M6 M6 M8 M8 M8 M0 M0 M M M M6 M6 M0 M0 Y 8 8 0 0 0 0 5 0 0 0 6 0 0 0 7

RACK AND PINION ACTUATOR CTF/ STF SERIES DOUBLE ACTING/ SINGLE ACTING 90 AND 80 DIMENSIONAL DETAILS S R M5 x 8 deep T D F Ø6. M6 4 S 6 4 DETAIL- X C O R M5X8 N Y DETAIL- Y B P 45.0 L M X A V DEPTH-X 4 5.0 ØZ CH-90 DETAIL Z ON REQUEST H I G W x Y deep ON Q PCD W x Y deep ON Q PCD DETAIL- Z ACTUATOR MODEL CTF3 CTF3E STF3 CTF40 CTF40E STF40 CTF50 CTF50E STF50 CTF63 CTF63E STF63 CTF80 CTF80E STF80 CTF90 CTF90E STF90 Z CTF00 CTF00E STF00 CTF0 CTF0E STF0 CTF5 CTF5E STF5 CTF50 CTF50E STF50 CTF75 CTF75E STF75 CTF00 CTF00E STF00 CTF50 CTF50E STF50 CTF0 CTF0E STF0 CTF350 CTF350E STF350 STF3E STF40E STF50E STF63E STF80E STF90E STF00E STF0E STF5E STF50E STF75E STF00E STF50E STF0E STF350E A 38 34 6 90 8 6 65 94 338 365 495 550 695 634 773 B 49 79 79 94 0 40 40 54 54 9 88 53 53 364 364 C 56 65 65 80 97 4 4 74 74 64 64 364 364 D - - - - - - - F 50 80 80 80 80 80 80 80 80 80 80 - - - - G 5 H 4 3 40 40 48 48 60 65 90 90 90 I 4 4 7 9 9 5 5 5 33 45 55 55 55 57 L 5 3.5 3.5 40 48 6 6 7 7 87 87 3 3 8.0 8.0 M 3 39 39 46.5 54.5 64 64 74 74 90 90 60 60.0.0 N A/F 8 8 3 5 5 5 5 5 5 4 46 55 55 55 55 O 0 9.5 6 9 9 9 9 9 9 9 48 58 58 58 58 P 0 0 0 0 0 0 0 0 0 0 0 Q 36 36 36 50 50 50 70 70 70 0 0 0 - - - Q - 50 50 70 70 70 0 0 0 5 5 40 40 65 65 ISO F03 F03 F03 F05 F05 F05 F07 F07 F07 F0 F0 F0 - - - FLANGE - F05 F05 F07 F07 F07 F0 F0 F0 F F F4 F4 F6 F6 R 0 0 S 6 6 6 6 6 6 6 6 6 6 6 6 6.5.5 T /8" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /" /" CH-90 9 4 7 7 7 7 36 46 46 55 W M5 M5 M5 M6 M6 M6 M8 M8 M8 M0 M0 M0 - - - Y 8 8 8 8 8 8 0 3 3 - - - W - M6 M6 M8 M8 M8 M0 M0 M0 M M M6 M6 M0 M0 Y - 8 8 0 0 0 3 3 6 6 6 6 0 0-60 -00-000 8

QTF ACTUATOR MATERIAL OF CONSTRUCTION 3 CROSS SECTION DRAWING 0 5 4 7 8 4 9 8 7 0 6 6 PART LIST 3 5 9 3 S.N. PART DESCRIPTION S.N. PART DESCRIPTION QTY MATERIAL QTY MATERIAL BODY ALUMINIUM ALLOY 3 PINION SEAL NBR COVER ALUMINIUM 4 PINION SEAL NBR 3 PISTON WITH RACK ALUMINIUM 5 PISTON SEAL NBR 4 PINION STEEL 6 HEX SOCKET SCREW 8 AISI 4 5 PINION BEARING POLYACETAL 7 O-RING NBR AISI 4 6 RACK BEARING POLYACETAL 8 WASHER 7 WASHER POLYACETAL 9 WASHER NBR POLYACETAL AISI 4 8 EXTERNAL CIRCLIP SPRING STEEL 0 PISTON BEARING 9 PINION BEARING POLYACETAL STROKE ADJUSTMENT SCREW 0 CAM INSERT CAST CARBON STEEL COVER SEAL NBR OUTER SPRING STEEL AISI 4 3 INNER SPRING STEEL LOCK NUT * THE NUMBER OF SPRINGS VARY WITH SIZE OF THE ACTUATOR AND THE SPRING SET SELECTED. ORDERING CODE a MODEL DOUBLE ACTING SINGLE ACTING SPRING SET E c b ROTATION -- CODE BODY PROTECTION ø 90 CCW QTF3E QTF40 QTF40E QTF50 QTF50E QTF63 QTF63E QTF80 QTF80E d QTF90 QTF90E PINION MATERIAL CODE QTF00 QTF00E STEEL (EN8) QTF0 QTF0E SS36 QTF5 QTF5E VITON AV QTF50 QTF50E FLUOROSILICONE FS QTF75 QTF75E QTF00 QTF00E QTF50 QTF50E QTF0 QTF0E QTF350 QTF350E 90 CW 80 CCW 80 CW CW ELECTROLESS NICKEL EN 80 EPOXY COATED CL 80 CW e SEALS ø NBR 8M ø HARD ANODIZED QTF3 CODE POLYETHYLENE : Default Use : ø (CW) : Clockwise, fail safe open (CCW) : Counter clockwise, fail safe close f CODE SPECIAL MODEL ønil PE CODE ø SUT 3 POSITION MECHANICAL HO HR 3 POSITION ELECTRICAL SUEL ORDERING EXAMPLE QTF 63 Double acting actuator QTF 63 E-7 Single acting actuator model QTF-63 with spring set 7 9

RACK AND PINION ACTUATOR CTF/ STF SERIES MATERIAL OF CONSTRUCTION CROSS SECTION DRAWING 5 4 7 9 8 4 3 8 7 0 PART LIST 3 0 5 6 9 3 6 S.N. PART DESCRIPTION QTY MATERIAL S.N. PART DESCRIPTION QTY MATERIAL 3 4 5 6 7 8 9 0 BODY COVER PISTON WITH RACK PINION PINION BEARING CENTER BORE SLEEVE WASHER EXTERNAL CIRCLIP PINION BEARING CAM INSERT COVER SEAL LOCK NUT CF8M (WCB for CSF) CF8M (WCB for CSF) ALUMINIUM STEEL POLYACETAL POLYACETAL POLYACETAL SPRING STEEL POLYACETAL CAST CARBON STEEL NBR AISI 4 3 4 5 6 7 8 9 0 3 PINION SEAL PINION SEAL PISTON SEAL HEX SOCKET SCREW O RING WASHER WASHER PISTON BEARING STROKE ADJUSTMENT SCREW OUTER SPRING INNER SPRING 8 NBR NBR NBR AISI 4 NBR AISI 4 AISI 4 POLYACETAL SS05 SPRING STEEL GRADE 3 SPRING STEEL GRADE 3 * THE NUMBER OF SPRINGS VARY WITH SIZE OF THE ACTUATOR AND THE SPRING SET SELECTED. ORDERING CODE MODEL a b c 0 DOUBLE ACTING CTF/ STF3 CTF/ STF40 CTF/ STF50 CTF/ STF63 CTF/ STF80 CTF/ STF90 CTF/ STF00 CTF/ STF0 CTF/ STF5 CTF/ STF50 CTF/ STF75 CTF/ STF00 CTF/ STF50 CTF/ STF0 CTF/ STF350 SINGLE ACTING CTF/ STF3E CTF/ STF40E CTF/ STF50E CTF/ STF63E CTF/ STF80E CTF/ STF90E CTF/ STF00E CTF/ STF0E CTF/ STF5E CTF/ STF50E CTF/ STF75E CTF/ STF00E CTF/ STF50E CTF/ STF0E CTF/ STF350E SPRING SET E -- d PINION MATERIAL SS36 (for STF) STEEL (EN8) (for CTF) CODE ønbr FLUOROSILICONE Use : ødefault : (CW) : Clockwise, fail safe open (CCW) : Counter clockwise, fail safe close ORDERING EXAMPLE ROTATION SEALS øpolyethylene VITON CODE 90 CCW ø 90 CW CW 80 CCW 80 80 CW 80 CW e CODE ønil STF63 E8-F-PE STF63, Spring return with spring set 8, with stainless steel piston with polyethylene seals. PE AV FS PISTON WITH RACK AND PINION HARD ANODIZED CF8M CARBON STEEL PISTON SPECIAL MODEL f CODE CODE ø SUT 3 POSITION MECHANICAL HO HR 3 POSITION ELECTRICAL SUEL ø F C

3 POSITION ROTARY ACTUATOR SPRING RETURN CONTROLLED BY LIMIT SWITCH The actuator is suitable for coarse - fine adjustment, typically for batching operations or processes The actuator has to be spring return The operation sequences fixed from full open, partial open to full close Infinite intermediate positions are possible with the limit switch It can be fine tuned to the application easily The settings can be changed at site with ease, by simply adjusting the third cam provided It is applicable for 90 or 80 Any ROTEX spring return actuator can be converted into this arrangement by adding ROTEX limit switch along with ROTEX NAMUR valve type 38 The accuracy and repeatability is around 3% and depends upon the air pressure variation, change in the torque of ball valve, change in density and the pressure of media, etc. Refer the dimension table on page 7, Direct Acting torque on page, for Single Acting refer torque on page 3 and 4 and reduce all values to half 3 POSITION ROTARY ACTUATOR DOUBLE ACTING/SINGLE ACTING 3 POSITION MECHANICAL STOPPER The actuator is suitable for coarse - fine adjustment, typically for batching operations or processes The actuator has to be double acting The repeatability is 00% since stopping is by mechanical stoppers. It is suitable for application calling for the precise fine-coarse adjustment like liquid filling system The actuator can be switched to one position from any other position very easily with the solenoid control. The 3rd position is achieved by the mechanical stopping of the piston movement, in the return stroke by pneumatic stopper pistons The intermediate position is present at 0% opening. The opening can be adjusted as required by the set screw. This is field adjustable The actuator as a standard, works in reverse action, as opposed to conventional configuration i.e. piston inward stroke opens the valve, and piston outward stroke closes the valve The end stops (+/- 0 ) are provided on the closing and opening side of the actuator for setting valve closing precisely The springs can be provided to bring actuator to mid position as a standard (optional attachment) For the dimension details, contact ROTEX Refer the spring torque tables on page 3,4

RACK AND PINION ACTUATOR 80 DEGREE ROTARY ACTUATOR Ideal for bottom entry 3 way valves Compact and light construction Tight shut off available for longer seat life, with the end stroke adjustment of the actuator Suitable for control duty DOUBLE ACTING / SINGLE ACTING Suitable typically for 3 way valves, requiring ON-OFF operation. It is available in both single acting (spring return) or double acting versions The single acting 80 actuator can provide center off for the 3 way ball valve, bottom entry by choosing the option, of 3 position It can be converted to 3 position 0-90 - 80 Actuator for 3 way valves using ROTEX limit switch and NAMUR valve type 38 The end stop adjustment is provided for opening and closing direction as a standard Actuator mounting is as per ISO 5 and accessories to NAMUR For weight and air consumption data, refer works 80 actuator has 50% of torque value, of that of 90 actuator FAIL SAFE AT 0 (END) FAIL SAFE AT 0 (MID) REGULATING ACTUATOR Backlash free operation between rack and pinion makes ROTEX actuator suitable for regulation duty coupled along with positioner (Pneumatic or Electro-Pneumatic) Long life of the actuator seals, the non wearing characteristic of the mechanical parts ensure that the control action is maintained, over the life time of the actuator It can be coupled along with various types of valves (Ball, V Port Ball or Plug, Segment ball, Butterfly, Plug) or louvers and dampers for variety of applications Typical control schemes along with the regulating actuator include provisions for:. Air failure safety includes stay-put or fail safe operation, like full close or full open. Power failure safety, including stay-put or fail safe operation, like full close or full open 3. Both air & power failure safety, including above

QTF ACTUATOR BALL VALVE WITH ROTARY ACTUATOR Well aligned assembly Accurately machined bracket and coupler. Perfect location Ease in dismounting even without affecting valve functional position Longer life due to extra over travel FIRE SAFE DESIGN Rotex standard is fire safe Fire safe as per BS: 535 fire tested as API 607 993, 4th edition Non fire safe available on request VALVE CONSTRUCTION Floating/ Trunnion mounted ball valve Top entry ball valve DESIGN Single piece Three piece 3 way T port 4 way MATERIAL END CONNECTION OTHER Forged steel/ Stainless steel Cast steel/ Stainless steel Alloy steel Special materials on request Screwed #800 to #500 Socket weld #800 to #500 Butt weld #800 to #500 Flanged #50 to #500 Metal seated Plastic body valve Cryogenic valve Sanitary/food grade valve Double block & bleed type Lined valve V-notch valve Jacketed valve 3

RACK AND PINION ACTUATOR STF ACTUATOR BALL VALVE WITH ROTARY ACTUATOR Well aligned assembly Accurately machined bracket and coupler. Perfect location Ease in dismounting even without affecting valve functional position Longer life due to extra over travel FIRE SAFE DESIGN Rotex standard is fire safe Fire safe as per BS: 535 Fire tested as API 607 993, 4th edition Non fire safe available on request VALVE CONSTRUCTION Floating/ Trunnion mounted ball valve Top entry ball valve DESIGN Single piece Two piece Three piece 3 way T Port 4 way 4 MATERIAL Forged steel/ Stainless steel Cast steel/ Stainless steel Alloy steel Special materials on request END CONNECTION Screwed #800 to #500 Socket weld #800 to #500 Butt weld #800 to #500 Flanged #50 to #500 OTHER Metal seated Plastic body valve Cryogenic valve Sanitary/ food grade valve Double block & bleed type Lined valve V-notch valve Jacketed valve

QTF ACTUATOR BUTTERFLY VALVE WITH ROTARY ACTUATOR Ideal for clean fluids and line size above 50 NB Tight shut off available Longer seat life with the end stroke adjustment of the actuator Suitable for control duty DESIGN As per AWWA: C504 and BS : 555 TYPE Centerline Double eccentric, high performance type Triple eccentric for light shutoff CONSTRUCTION Single body/ split body wafer type Single body/ split body lug type Single body/ split bod flanged type END CONNECTION Wafer type/ lug type in rating PN6, PN0, PN6, PN5, PN40, PN00, PN00, PN400 Flanged type in rating #50 #0 #600 MATERIAL Cast Iron, Ductile Iron, Cast Carbon Steel Cast Stainless Steel Special material on request OTHER Metal seal dampers (Leakage class II) Metal seated tight shut off Fire safe butterfly valve Lined butterfly valve Sanitary service butterfly valve 5

RACK AND PINION ACTUATOR QTF ACTUATOR PLUG VALVE WITH ROTARY ACTUATOR Ideally suited to aggressive, corrosive and potentially hazardous media Absolute tight shut off in case of sleeved plug valve Long life due to taper plug construction Frequent operations possible Longer life Suited for slurry application Line plug valve suited for corrosive service On/ Off or control duty FIRE SAFE DESIGN Rotex standard is fire safe Fire safe as per BS: 535 fire tested as API 607 993, 4th edition Non fire safe available on request VALVE CONSTRUCTION As per BS:5353 (Sleeved plug valve) Lubricated, taper plug valve Pressure balanced, inverted plug valve Sleeved plug valve DESIGN way 3 way side entry/ bottom entry 4 way 5 way bottom entry END CONNECTION Screwed #800 to #500 Socket weld #800 to #500 Butt weld #800 to #500 Flanged #800 to #500 MATERIAL Cast iron Ductile iron Cast steel/ Cast Stainless steel Alloy steel Special materials on request OTHERS Lined plug valve V-port plug valve Jacketed plug valve Sanitary service valve 6

QTF ACTUATOR LINED BALL VALVE WITH ROTARY ACTUATOR Well aligned assembly Accurately machined bracket and coupler. Perfect location Ease in dismounting even without affecting valve functional position Longer life due to extra over travel VALVE CONSTRUCTION Lined ball valve PFA or FEP lining Floating ball valve Floating ball valve with integral stem DESIGN Two piece Three piece 3 way T port MATERIAL Forged steel/ Stainless steel Cast steel/ Stainless steel, lined Alloy steel, lined Special materials on request OTHER PTFE lined on special request V-notch valve END CONNECTION Flanged #50 to #0 7

RACK AND PINION ACTUATOR QTF ACTUATOR TRICLOVER END BALL VALVE WITH ROTARY ACTUATOR Well aligned assembly Accurately machined bracket and coupler. Perfect location Ease in dismounting even without affecting valve functional position Longer life due to extra over travel FIRE SAFE DESIGN Rotex standard is fire safe Fire safe as per BS: 535 Fire tested as API 607 993, 4th edition Non fire safe available on request DESIGN Floating ball valve DESIGN Three piece 3 way T port MATERIAL Forged steel/ Stainless steel Cast steel/ Stainless steel Alloy steel Special materials on request OTHER Metal seated Sanitary/food grade valve V-notch valve END CONNECTION Triclover end 8

QTF ACTUATOR UNIQUE FIRST "FIRE SAFE" FLUSH BOTTOM VALVE WITH ROTARY ACTUATOR Stem of the valve fire safe and non blowout proof Well aligned assembly Accurately machined bracket and coupler. Perfect location Ease in dismounting even without affecting valve functional position Longer life due to extra over travel DESIGN Single piece Two piece Three piece "T" port for zero retain FIRE SAFE DESIGN Rotex standard is fire safe Fire safe as per BS: 535 fire tested as API 607 993, 4th edition Non fire safe available on request VALVE CONSTRUCTION OTHER MATERIAL END CONNECTION Floating ball valve Metal seated Sanitary/food grade valve Lined valve V-notch valve Jacketed valve Forged steel/ Stainless steel Cast steel/ Stainless steel Alloy steel Special materials on request Flanged #50 to #900 9

RACK AND PINION ACTUATOR QTF ACTUATOR Z ROVOL BALL VALVE WITH ROTARY ACTUATOR Well aligned assembly Accurately machined bracket and coupler. Perfect location Ease in dismounting even without affecting valve functional position Longer life due to extra over travel FIRE SAFE DESIGN Rotex standard is fire safe Fire safe as per BS: 535 fire tested as API 607 993, 4th edition Non fire safe available on request VALVE CONSTRUCTION Floating ball valve DESIGN Three piece 3 way T port MATERIAL Forged steel/ Stainless steel Cast steel/ Stainless steel Alloy steel Special materials on request OTHER Metal seated Sanitary/food grade valve Lined valve V-notch valve Jacketed valve END CONNECTION Screwed #800 Socket weld #800 Butt weld #800 Triclover end Flanged #50 to #500

VALVE AUTOMATION SYSTEM TOP AUTOMATION Rotex supplies entire top automation for the Valve Manufacturer or automation center. We supply all the parts duly mounted above the valve. Various combination of accessories can be supplied as listed below. We manufacture complete on-off valve with Rotex valves and accessories. Rotex has following but not limited to listed below capability to create valve automation system. PARTIAL STROKING DEVICE Mechanical lockout for partial stroking. Using pneumatic valves Using limit switch and SOV Using SMART positioner AUXILIARY TANK Auxiliary tank is used for using for emergency. Most application it is used for converting a double acting actuator to fail safe close or open. Tanks are mounted on the actuator with safety valve and other accessories. Rotex tanks are PED approved, and can supply with 3. certification FIRE JACKETING Fire box can be supplied with entire on-off valve. The fire box are UL approved. Ball valves are outside fire box. FIRE BLANKET Fire blankets are strapped on to the on-off system just like above QUICK CLOSING Rotex actuator can be operated at high speed. Rotex provide special ports for quick closing. On critical speeds Rotex installs hydraulic shock absorber to absorb the end stroke. HYDRUALIC DAMPENING Rotex actuator can be supplied with speed control using hydraulic dampener. The entire stroke of the actuator can be controlled to as low as 0 sec to open a small actuator like QTF80. 3

ROTEX GROUP SALES HEAD QUARTER B/703/704, Western Edge-II, Off Western Express Highway, Borivli (East), Mumbai-400066 Ph: +9 4444 Fax: +9 4400 Email: sales-bby@rotexautomation.com OVERSEAS: ROTEX AUTOMATION LIMITED UNIT 987/, GIDC Makarpura, Vadodara - 39000, Gujarat, INDIA. Ph. : +9 65 63836/ 638795/ 46 Fax : +9 65 638 Email : rotexbrd@rotexautomation.com ROTEX MANUFACTURERS AND ENGINEERS PRIVATE LIMITED UNIT Manpada Road, Dombivli (E) - 404 Maharashtra, INDIA. Ph. : +9 5 87033/ 87390/ 8796/ 87989/ 870890 Fax : +9 5 879/ 870663 Email : rotexdbl@rotexautomation.com ROTEX AUTOMATION LIMITED UNIT C - B/ 50, 4 & 5, GIDC Vithal Udyognagar - 388, Gujarat, INDIA. Ph. : +9 69 364/ 369/ 36399 Fax : +9 69 3644 Email : rotexvun@rotexautomation.com ROTEX MANUFACTURERS AND ENGINEERS PRIVATE LIMITED UNIT Plot No. E-6, Additional Ambarnath MIDC Ambarnath (East) 4 506 Dist Thane, Maharashtra, India ROTEX Controls B.V. Aventurijn 336 LB Dordrecht The Netherlands Phone : +3 78 68 07 Email : info@rotexcontrols.nl ROTEX Controls, Inc. Sullivan Parkway Fort Edward, NY 88 Phone: + (888) 83 977 Fax : + (866) 478 960 Email : sales@rotexcontrols.com QTF/ CTF/ STF-05-M3 Design : Media Inc. Ph. : +9-65-4835 MAGWEN Valves GmbH Am Biotop 397 Osterweddingen/Suelzeta Ph. : +49 3905 676 3 Fax : +49 3905 676 50 Email : sales@magwen.de www.magwen.de QTF/ CTF/ STF : 0 : 6 www.rotexautomation.com @rotexautomation.com