IM 15 Rotary Jet Mixer Tank gitators and Mixers Flow rate Relationship between inlet pressure and flow rate for liquids with waterlike properties for the IM 15 Rotary Jet Mixer. Volumetric flow rate [m 3 /h] m³/h 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 1 2 3 4 5 6 7 8 9 10 4301-0005 11 12 bar Reach of jet Reach of jet for the IM 15 during cleaning, and indicative reach of jet for mixing of liquids with water-like properties. Reach of jet [m] m 12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 D 2 3 4 5 6 7 8 9 10 E 4301-0006 11 12 bar Inlet pressure Inlet pressure ) d = 8 mm ) d = 8 mm D) leaning Nozzles ) d = 7 mm Nozzles ) d = 7 mm E) Mixing ) d = 6 mm ) d = 6 mm Dimensions (mm) The Rotary Jet Mixing techlogy Traditional Mixing techlogy Round pumping Propeller mixing 4301-0002 4301-0003 D 4301-0004 4106-0010 F E D = Rotary Jet Mixer =Gas =Product D = Liquid feed = Liquid feed =Product 4106-0011 G H J D E F G H J 297 170 50 204 78 152 ø216 ø264 ø180.1048
Tank gitators and Mixers IM 20 Rotary Jet Mixer. kysuperior mixing Liquid, Gas and Powder IM 20 Rotary Jet Mixer The patented IM 20 Rotary Jet Mixer (RJM) does t only mix fast, efficient and uniform but creates also the necessary process flexibility that makes it easy to switch to new product formulations with diverse viscosities, densities and volumes. esides classic liquid to liquid mixing the RJM is excellent for gas and powder dispersion plus a superb tank cleaning machine. pplications Process and storage vessels between 5-200 m 3 used in a wide range of industries such as: beer & beverage, food & ingredients, home & personal care, health care, biotech and chemical industry etc. Operation Secure that the mixer is positioned in the correct level and submerged into the liquid before round pumping or when adding any additional products from any up-stream pipe works.. TEHNIL DT Lubricant:... Self-lubricating with the mixing/cleaning fluid onnection:... Standardthread2 SP or NPT, female Min.tankopening:... Seedimensiondrawings Pressure Workingpressure:... 2-12 bar Recommended pressure duringmixing:... 2-6 bar Recommended pressure duringip:... 5-6.5 bar PHYSIL DT Materials Materials: Weight:................... ISI 316L, ISI 316, SF 2205, PEEK, PVDF, Tefzel, eramics...12.2kg Temperature Max.workingtemperature:...95 Max.ambienttemperature:...140 enefits Using the IM 20 Rotary Jet Mixer makes it possible, at a modest investment, to perform fast and efficient mixing in a sanitary system. In traditional systems, using propeller mixers, a rotating shaft penetrates the tank wall, and a mechanical seal and a gear box are installed. With the Rotary Jet Mixer techlogy the shaft, seal and gearbox are eliminated, and a more sanitary design is obtained. With the Rotary Jet Mixing techlogy good mixing is achieved without the use of baffles. The Rotary Jet Mixer can also be used for gas dispersion and for dispersion and dissolving of powder. The IM 20 can furthermore be used for efficient IP when the tank is empty, saving liquid, chemicals and energy compared to a fixed spray ball IP system..1049
IM 20 Rotary Jet Mixer Tank gitators and Mixers Flow rate Relationship between inlet pressure and flow rate for liquids with waterlike properties for the IM 20 Rotary Jet Mixer. Volumetric flow rate [m 3 /h] m³/h 60 56 52 48 44 40 36 32 28 24 20 16 12 8 4 0 0 1 Nozzles 2 3 4 5 6 7 8 ) d = 10 mm ) d = 9 mm ) d = 8 mm 9 10 4301-0007 11 12 bar Inlet pressure Reach of jet Reach of jet for the IM 20 during cleaning, and indicative reach of jet for mixing of liquids with water-like properties. Reach of jet [m] m 14 13 12 11 10 D 9 8 7 6 E 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 bar Inlet pressure ) d = 10 mm D) leaning Nozzles ) d = 9 mm E) Mixing ) d = 8 mm 4301-0008 Dimensions (mm) The Rotary Jet Mixing techlogy Traditional Mixing techlogy Round pumping Propeller mixing 4301-0002 4301-0003 4301-0004 D D 4106-0010 F E = Rotary Jet Mixer =Gas =Product D = Liquid feed = Liquid feed =Product 4106-0011 G H J D E F G H J 356 220 65 268 98 195 ø280 ø343 ø232.1050
Tank gitators and Mixers IM 25 Rotary Jet Mixer. kysuperior Mixing Liquid, Gas and Powder IM 25 Rotary Jet Mixer The patented IM 25 Rotary Jet Mixer (RJM) does t only mix fast, efficient and uniform but creates also the necessary process flexibility that makes it easy to switch to new product formulations with diverse viscosities, densities and volumes. esides classic liquid to liquid mixing the RJM is excellent for gas and powder dispersion plus a superb tank cleaning machine. pplications Process and storage vessels between 10-1000 m 3 used in a wide range of industries such as: beer & beverage, food & ingredients, home & personal care, health care, biotech and chemical industry etc. Operation Secure that the mixer is positioned in the correct level and submerged into the liquid before round pumping or when adding any additional products from any up-stream pipe works.. TEHNIL DT Lubricant:... Self-lubricating with the mixing/cleaning fluid onnection:... Standardthread2.5 SP, female Min.tankopening:... Seedimensiondrawings Pressure Workingpressure:... 2-12 bar Recommended pressure duringmixing:... 4-8 bar Recommended pressure duringip:... 5-10 bar PHYSIL DT Materials Materials: Weight:................... ISI 316L, ISI 316, SF 2205, PEEK, PVDF, arbon, Tefzel, eramics...13.2kg Temperature Max.workingtemperature:...95 Max.ambienttemperature:...140 enefits Using the IM 25 Rotary Jet Mixer makes it possible, at a modest investment, to perform fast and efficient mixing in a sanitary system. In traditional systems, using propeller mixers, a rotating shaft penetrates the tank wall and a mechanical seal and a gear box are installed. With the Rotary Jet Mixing techlogy the shaft, seal and gearbox are eliminated, and a more sanitary design is obtained. With the Rotary Jet Mixing techlogy good mixing is achieved without the use of baffles. The Rotary Jet Mixing techlogy can also be used for gas dispersion and for dispersion and dissolving of powder. The IM 25 can furthermore be used for efficient IP when the tank is empty, saving liquid, chemicals and energy compared to a fixed spray ball IP system..1051
IM 25 Rotary Jet Mixer Tank gitators and Mixers Flow rate Relationship between inlet pressure and flow rate for liquids with waterlike properties for the IM 25 Rotary Jet Mixer. Volumetric flow rate [m 3 /h] m³/h 80 70 60 50 40 D 30 20 10 0 0 1 2 3 4 5 6 7 8 9 10 bar Inlet pressure 4301-0009 Reach of jet Reach of jet for the IM 25 during cleaning, and indicative reach of jet for mixing of liquids with water-like properties. Reach of jet [m] m 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 4 5 6 7 8 9 10 D 4301-0010 11 12 bar Inlet pressure ) 2 x ø21 mm ) 2 x ø21 mm Nozzles ) 2 x ø19 mm Nozzles ) 2 x ø19 mm ) 2 x ø17 mm ) 2 x ø17 mm D) 2 x ø15 mm D) 2 x ø15 mm Dimensions (mm) The Rotary Jet Mixing techlogy Traditional Mixing techlogy Round pumping Propeller mixing 4301-0002 4301-0003 D 4301-0004 E 4106-0010 D = Rotary Jet Mixer =Gas =Product D = Liquid feed = Liquid feed =Product 4106-0023 F =2.5 SP G H D E F G H 286 155 80 337 220 ø343 ø424 ø223.1052
Tank gitators and Mixers Product code 5507 lfa Laval MM UltraPure, Magnetic Mixer Please tice before ordering - Standard configuration according to PD sheet. - Special item number for USP class VI for female sililcon carbide bearing - To ensure easy and problem free operation please always order these three items together: Mixer unit, weld plate and pre-programmed frequency inverter - If in doubt please contact your lfa Laval technical support Item No, Item No RPL Ra<0.5 RPL Impeller diameter Ra<0.5 [EUR] Electropolished [EUR] Description [mm] [inch] 9614063801 9614063805 MM338-4 101.6 4 9614063802 9614063806 MM338-6 152.4 6 9614063901 9614063907 MM434-8 203.2 8 9614063902 9614063908 MM434-10 254.0 10 9614063903 9614063909 MM434-12 304.8 12 Mixer without weldplate TD 531-048 RPL Weld plate dimensions Ra<0.5 [EUR] Description ød [mm / inch] T [mm / inch] t [mm / inch] Weld plate. Required in order for the mixer to work 9634086405 Weld plate for MM338 90 / 3.5 5 / 0.2 1 / 0.04 9634086404 Weld plate for MM434 149 / 5.9 6 / 0.2 1 / 0.04 T t 45 o ød TD 531-032 RPL [EUR] Description 9634086478 Lenze M1105SE frequency inverter for 0.37 kw (0.5 HP) drive in stainless steel cabinet (IP66) 9634086479 Lenze M1115SE frequency inverter for 1.1 kw (1.5 HP) drive in stainless steel cabinet (IP66) Frequency inverters.1053
Tools and spare parts for lfa Laval MM UltraPure, Magnetic Mixer Product code 5549 Tank gitators and Mixers Please tice before ordering The impeller tool is required for installation. The tool fits all sizes and only one is required. The sockets are different for MM338 and MM434 If in doubt please contact your lfa Laval Technical Support RPL [EUR] Description 9634086437 Removal Tool Rod for MM338 and 434. Length 60mm / 24" Tools TD 531-050 9634086352 Rod Extension MM338 and MM434. Length 90mm / 36" TD 531-051 9634086114 earing socket MM338 9634086147 earing socket MM434 TD 531-049.1054
Tank gitators and Mixers Product code: 5504 Range of gitators New range of agitators New wide range of lfa Laval agitators replaces the LKR. The range includes 4 different types of sanitary agitators LT lfa Laval Top mounted agitator LT lfa Laval Top mounted agitator with ottom steady bearing L lfa Laval ottom mounted agitator LS lfa Laval Side mounted agitator The agitator range is with its high hygienic standards targeted at sanitary applications. The high energy efficiency is however just as attractive to n-sanitary applications. For any tank size the option of an agitator with low energy consumption is available. ll agitators are built using the same basic modules in various sizes. Selecting an LS agitator is possible by means of the following tables. Please tice that the tables represent only a limited range of the available configurations. Direct replacement of the LKR-5 is possible but the available range may offer a more efficient solution when selected based on tank size and product. For configurations t included in the ordering leaflet please use the Enquiry Form available from your local lfa Laval office. Precondition of selecting LS pplication: Selection: hoose the agitator from the list by tank volume interval. Note: The tank height/diameter ratio must be lower than 4 - if the ratio is higher, please contact lfa Laval. Duty: For keeping the media homogeneous/agitation (agitation time for homogeus media: max. 15 min) - typical for storage tanks Media(s): Milk, pasteurized milk, recombined milk, raw milk, skim milk, whey, wine, juices, etc. Note: No heavy particles in the media Viscosity: Max. Specific gravity (kg/dm³): Max. 1.1 Temperature ( ): Max. 95 (IP temperature) Tank Shape: H Tank/øiD < 4 TD 528-047 O-ring seal against tank flange, drain, oil trap (only geared versions) and shaft seal: single mechanical ELLOW SEL TD 528-048 O-ring seal against tank flange, drain, oil trap (only geared versions) and shaft seal: single mechanical ne bellow seal.1055
LS, 50 Hz, 0-10 cp Product code: 5504 Tank gitators and Mixers DirectDrive GearedDrive Tank Size (50 Hz) Viscosity 0-10cP (50 Hz) Viscosity 0-10cP Voltage (V) (rpm) Lantern (m 3 ) (rpm) Voltage (V) Seal TE682608100040 910 0.75 < > 2.5 7.0 > 0.25 283 TE682608100040 910 0.75 < > 7.0 8.0 > 0.37 289 TE682608100120 910 0.75 < > 8.0 9.0 > 0.37 289 TE682608100120 910 0.75 < > 8.0 10.5 > 0.37 289 TE682608100120 > 10.5 910 0.75 < > 0.37 289 14.0 TE682608100200 > 14.0 910 1.1 < > 0.55 285 18.0 TE682608100200 > 18.0 910 1.1 < > 0.55 285 25.0 TE682608100280 > 25.0 940 2.2 < > 0.55 228 30.0 TE682608100280 > 30.0 940 2.2 < > 0.55 228 33.0 TE682608100280 > 33.0 940 2.2 < > 0.55 228 40.0 TE682608100360 / > 40.0 960 4.0 < > 0.55 228 50.0 TE682608100360 / > 50.0 960 4.0 < > 0.75 214 52.0 TE682608100360 / > 52.0 960 4.0 < > 0.75 214 55.0 TE682608100650 TE682608100690 TE682608100810 TE682608100850 TE682608100970 TE682608101010 TE682608101130 TE682608101170 TE682608100970 TE682608101010 TE682608101130 TE682608101170 TE682608100970 TE682608101010 TE682608101130 TE682608101170 TE682608100970 TE682608101010 TE682608101130 TE682608101170 TE682608101290 TE682608101330 TE682608101450 TE682608101490 TE682608101290 TE682608101330 TE682608101450 TE682608101490 TE682608101610 TE682608101650 TE682608101770 TE682608101810 TE682608101930 TE682608101970 TE682608102090 TE682608102130 TE682608101930 TE682608101970 TE682608102090 TE682608102130 TE682608101930 TE682608101970 TE682608102090 TE682608102130 TE682608102570 TE682608102610 TE682608102730 TE682608102770 TE682608102570 TE682608102610 TE682608102730 TE682608102770.1056
Tank gitators and Mixers Product code: 5504 LS, 50 Hz, 0-10 cp DirectDrive (50 Hz) Viscosity 0-10cP Voltage (V) (rpm) TE682608100360 TE682608100360 TE682608100440 TE682608100440 TE682608100440 TE682608100440 TE682608100520 TE682608100520 TE682608100520 TE682608100520 TE682608100520 TE682608100520 / 960 4.0 < / 960 4.0 < / 960 5.5 < / 960 5.5 < / 960 5.5 < / 960 5.5 < / 960 11 < / 960 11 < / 960 11 < / 960 11 < / 960 11 < / 960 11 < Tank Size (m 3 ) > 55.0 80.0 >80.0 95.0 >95.0 135.0 > 135.0 140.0 > 140.0 170.0 > 170.0 185.0 > 185.0 195.0 > 195.0 200.0 > 200.0 265.0 > 265.0 280.0 > 280.0 300.0 > 300.0 320.0 GearedDrive (50 Hz) Viscosity 0-10cP Lantern (rpm) Voltage (V) Seal > 0.75 214 > 1.5 234 > 1.5 234 > 2.2 242 > 2.2 242 > 2.2 242 > 3.0 241 > 3.0 241 > 3.0 241 > 4.0 276 / > 4.0 276 / / > 4.0 276 TE682608102570 TE682608102610 TE682608102730 TE682608102770 TE682608103210 TE682608103250 TE682608103370 TE682608103410 TE682608103210 TE682608103250 TE682608103370 TE682608103410 TE682608103850 TE682608103890 TE682608104010 TE682608104050 TE682608103850 TE682608103890 TE682608104010 TE682608104050 TE682608103850 TE682608103890 TE682608104010 TE682608104050 TE682608104490 TE682608104530 TE682608104650 TE682608104690 TE682608104490 TE682608104530 TE682608104650 TE682608104690 TE682608104490 TE682608104530 TE682608104650 TE682608104690 TE682608105130 TE682608105170 TE682608105290 TE682608105330 TE682608105130 TE682608105170 TE682608105290 TE682608105330 TE682608105130 TE682608105170 TE682608105290 TE682608105330.1057
LS, 50 Hz, 10-50 cp Product code: 5504 Tank gitators and Mixers DirectDrive GearedDrive Tank Size (50 Hz) Viscosity 10-50cP (50 Hz) Viscosity 10-50cP Voltage (V) (rpm) Lantern (m 3 ) (rpm) Voltage (V) Seal TE682608100040 TE682608100650 TE682608100690 910 0.75 < > 2.5 5.0 > 0.25 283 TE682608100810 TE682608100850 TE682608100120 TE682608100970 TE682608101010 910 0.75 < > 5.0 8.0 > 0.37 289 TE682608101130 TE682608101170 TE682608100200 TE682608100970 TE682608101010 910 1.1 < > 8.0 12.0 > 0.37 289 TE682608101130 TE682608101170 TE682608100200 TE682608101290 > 12.0 TE682608101330 910 1.1 < > 0.55 285 18.0 TE682608101450 TE682608101490 TE682608100280 TE682608101610 > 18.0 TE682608101650 940 2.2 < > 0.55 228 25.0 TE682608101770 TE682608101810 TE682608100280 TE682608101930 > 25.0 TE682608101970 940 2.2 < > 0.55 228 35.0 TE682608102090 TE682608102130 TE682608100360 TE682608102570 / > 35.0 TE682608102610 960 4.0 < > 0.75 214 55.0 TE682608102730 TE682608102770 TE682608100360 TE682608102570 / > 55.0 TE682608102610 960 4.0 < > 0.75 214 75.0 TE682608102730 TE682608102770 TE682608100440 TE682608103210 / > 75.0 TE682608103250 960 5.5 < > 1.5 234 105.0 TE682608103370 TE682608103410 TE682608100440 TE682608103210 / > 105.0 TE682608103250 960 5.5 < > 1.5 234 135.0 TE682608103370 TE682608103410 TE682608100440 TE682608103850 / > 135.0 TE682608103890 960 5.5 < > 2.2 242 170.0 TE682608104010 TE682608104050 TE682608100520 TE682608104490 / > 170.0 TE682608104530 960 11 < > 3.0 241 230.0 TE682608104650 TE682608104690 TE682608100520 TE682608105130 / > 230.0 / TE682608105170 960 11 < > 4.0 276 300.0 TE682608105290 TE682608105330.1058
Tank gitators and Mixers Product code: 5504 LS, 60 Hz, 0-10 cp DirectDrive GearedDrive Tank Size (60 Hz) Viscosity 0-10cP (60 Hz) Viscosity 0-10cP Voltage (V) (rpm) Lantern (m 3 ) (rpm) Voltage (V) Seal TE682608100040 1092 0.9 < > 2.5 7.0 > 0.29 340 TE682608100040 1092 0.9 < > 7.0 8.0 > 0.29 340 TE682608100040 1092 0.9 < > 8.0 9.0 > 0.29 340 TE682608100040 1092 0.9 < > 8.0 10.5 > 0.43 347 TE682608100120 >10.5 1092 0.9 < > 0.43 347 14.0 TE682608100120 >14.0 1092 0.9 < > 0.43 347 18.0 TE682608100200 >18.0 1092 1.32 < > 0.63 342 25.0 TE682608100200 >25.0 1092 1.32 < > 0.63 274 30.0 TE682608100200 >30.0 1092 1.32 < > 0.63 274 33.0 TE682608100280 >33.0 1128 2.6 < > 0.63 226 40.0 TE682608100280 >40.0 1128 2.6 < > 0.63 226 50.0 TE682608100280 >50.0 1128 2.6 < > 0.63 226 52.0 TE682608100280 > 52.0 1128 2.6 < > 0.86 211 55.0 TE682608100650 TE682608100690 TE682608100810 TE682608100850 TE682608100650 TE682608100690 TE682608100810 TE682608100850 TE682608100650 TE682608100690 TE682608100810 TE682608100850 TE682608100970 TE682608101010 TE682608101130 TE682608101170 TE682608100970 TE682608101010 TE682608101130 TE682608101170 TE682608100970 TE682608101010 TE682608101130 TE682608101170 TE682608101290 TE682608101330 TE682608101450 TE682608101490 TE682608101610 TE682608101650 TE682608101770 TE682608101810 TE682608101610 TE682608101650 TE682608101770 TE682608101810 TE682608102250 TE682608102290 TE682608102410 TE682608102450 TE682608102250 TE682608102290 TE682608102410 TE682608102450 TE682608102250 TE682608102290 TE682608102410 TE682608102450 TE682608102890 TE682608102930 TE682608103050 TE682608103090.1059
LS, 60 Hz, 0-10 cp Product code: 5504 Tank gitators and Mixers DirectDrive (60 Hz) Viscosity 0-10cP Voltage (V) (rpm) TE682608100360 1152 4.8 < TE682608100360 1152 4.8 < TE682608100360 1152 4.8 < TE682608100360 1152 4.8 < TE682608100360 1152 4.8 < TE682608100600 1152 13.2 < TE682608100600 1152 13.2 < TE682608100600 1152 13.2 < TE682608100600 1152 13.2 < TE682608100600 1152 13.2 < TE682608100600 1152 13.2 < N < Tank Size (m 3 ) >55.0 80.0 > 80.0 95.0 > 95.0 135.0 > 135.0 140.0 > 140.0 170.0 > 170.0 185.0 > 185.0 195.0 > 195.0 200.0 > 200.0 265.0 > 265.0 280.0 > 280.0 300.0 > 300.0 320.0 GearedDrive (60 Hz) Viscosity 0-10cP Lantern (rpm) Voltage (V) Seal > 0.86 211 > 1.73 242 > 1.73 242 > 1.73 242 > 2.53 251 > 2.53 251 > 2.53 251 > 2.53 251 > 3.45 227 > 3.45 227 > 4.6 275 > 4.6 275 TE682608102890 TE682608102930 TE682608103050 TE682608103090 TE682608103530 TE682608103570 TE682608103690 TE682608103710 TE682608103530 TE682608103570 TE682608103690 TE682608103730 TE682608103530 TE682608103570 TE682608103690 TE682608103730 TE682608104170 TE682608104210 TE682608104330 TE682608104370 TE682608104170 TE682608104210 TE682608104330 TE682608104370 TE682608104170 TE682608104210 TE682608104330 TE682608104370 TE682608104170 TE682608104210 TE682608104330 TE682608104370 TE682608104810 TE682608104850 TE682608104970 TE682608105010 TE682608104810 TE682608104850 TE682608104970 TE682608105010 TE682608105450 TE682608105490 TE682608105610 TE682608105650 TE682608105450 TE682608105490 TE682608105610 TE682608105650.1060
Tank gitators and Mixers Product code: 5504 LS, 60 Hz, 10-50 cp DirectDrive GearedDrive Tank Size (60 Hz) Viscosity 10-50cP (60 Hz) Viscosity 10-50cP Voltage (V) (rpm) Lantern (m 3 ) (rpm) Voltage (V) Seal TE682608100040 TE682608100650 TE682608100690 1092 0.9 < > 2.5 5.0 > 0.29 340 TE682608100810 TE682608100850 TE682608100120 TE682608100970 TE682608101010 1092 0.9 < > 5.0 8.0 > 0.43 347 TE682608101130 TE682608101170 TE682608100200 TE682608100970 TE682608101010 1092 1.32 < > 8.0 12.0 > 0.43 347 TE682608101130 TE682608101170 TE682608100200 TE682608101290 >12.0 TE682608101330 1092 1.32 < > 0.63 342 18.0 TE682608101450 TE682608101490 TE682608100280 TE682608101610 >18.0 TE682608101650 1128 2.6 < > 0.63 274 25.0 TE682608101770 TE682608101810 TE682608100280 TE682608102250 >25.0 TE682608102290 1128 2.6 < > 0.63 226 35.0 TE682608102410 TE682608102450 TE682608100360 1152 4.8 < TE682608102890 >35.0 TE682608102930 > 0.86 211 55.0 TE682608103050 TE682608103090 TE682608100360 1152 4.8 < TE682608102890 >55.0 TE682608102930 > 0.86 211 75.0 TE682608103050 TE682608103090 TE682608100360 1152 4.8 < TE682608103530 >75.0 TE682608103570 > 1.73 242 105.0 TE682608103690 TE682608103730 TE682608100360 1152 4.8 < TE682608103530 > 105.0 TE682608103570 > 1.73 242 135.0 TE682608103690 TE682608103730 TE682608100360 1152 4.8 < TE682608104170 > 135.0 TE682608104210 > 2.53 251 170.0 TE682608104330 TE682608104370 TE682608100600 1152 13.2 < TE682608104810 > 170.0 TE682608104850 > 3.45 227 230.0 TE682608104970 TE682608105010 TE682608100600 1152 13.2 < TE682608105450 > 230.0 TE682608105490 > 4.6 275 300.0 TE682608105610 TE682608105650.1061
LS - Side Mounted gitator Product code: 5504 Tank gitators and Mixers RPL EUR Tank flange S M ø øf ød øp DirectDrive - Sealing arrangement - With Lantern TE682608100040 ø250 350 477 435 150 295 200 30 175 TE682608100120 ø250 350 477 435 150 295 200 30 200 S TE682608100200 ø250 350 477 435 150 295 200 30 225 M TE682608100280 ø300 450 485 471 200 295 250 30 250 TE682608100360 ø300 450 596 566 200 345 250 30 300 TE682608100440 ø300 450 596 566 260 345 250 30 350 TD 604-005 TE682608100520 ø400 500 750 720 130 395 350 40 400 TE682608100600 ø400 500 750 720 130 395 350 40 350 GearedDrive - Sealing arrangement - Without Lantern TE682608100650 ø250 475 523 496 124 345 200 35 300 TE682608100970 ø250 475 523 496 124 345 200 35 350 TE682608101290 ø250 475 523 496 124 345 200 35 400 TE682608101610 ø250 500 523 496 124 345 200 35 450 TE682608101930 ø250 500 523 496 124 345 200 35 500 TE682608102250 ø250 500 523 496 124 345 200 35 500 TE682608102570 ø250 500 561 539 142 345 200 35 550 TE682608102890 ø250 500 561 539 142 345 200 35 550 TE682608103210 ø250 500 687 648 147 345 200 35 600 TE682608103530 ø250 500 687 648 147 345 200 35 600 TE682608103850 ø300 700 950 898 169 410 250 35 650 TE682608104170 ø300 700 950 898 169 410 250 35 650 TE682608104490 ø300 700 950 898 169 410 250 35 700 TE682608104810 ø300 700 950 898 169 410 250 35 700 TE682608105130 ø300 700 950 921 179 410 250 35 700 TE682608105450 ø300 700 950 921 179 410 250 35 700 Without Lantern - Sealing arrangementwithout Lantern TE682608100810 ø250 475 523 496 124 345 200 30 300 TE682608101130 ø250 475 523 496 124 345 200 30 350 TE682608101450 ø250 475 523 496 124 345 200 30 400 TE682608101770 ø250 500 523 496 124 345 200 30 450 TE682608102090 ø250 500 523 496 124 345 200 30 500 TE682608102410 ø250 500 523 496 124 345 200 30 500 TE682608102730 ø250 500 561 539 142 345 200 30 550 TE682608103050 ø250 500 561 539 142 345 200 30 550 TE682608103370 ø250 500 687 648 147 345 200 30 600 TE682608103690 ø250 500 687 648 147 345 200 30 600 TE682608104010 ø300 700 950 898 169 410 250 40 650 TE682608104330 ø300 700 950 898 169 410 250 40 650 TE682608104650 ø300 700 950 898 169 410 250 40 700 TE682608104970 ø300 700 950 898 169 410 250 40 700 TE682608105290 ø300 700 950 921 179 410 250 40 700 TE682608105610 ø300 700 950 921 179 410 250 40 700 ØP ØP ØP ØD ØD ØF S ØD S ØF ØF M M Ø Ø TD 604-007 Ø TD 604-004 Other OptionsProduct code: 5508 TE2603023190 Welding flanges for tank connection ø250 TE2603022590 ø300 TE2603050080 ø400.1062
Tank gitators and Mixers Product code: 5504 LS - Side Mounted gitator RPL Tank GearedDrive - Sealing S M ø øf ød øp EUR flange arrangement - With Lantern TE682608100690 ø250 475 623 596 124 345 200 35 300 TE682608101010 ø250 475 623 596 124 345 200 35 350 TE682608101330 ø250 475 623 596 124 345 200 35 400 TE682608101650 ø250 500 623 596 124 345 200 35 450 TE682608101970 ø250 500 623 596 124 345 200 35 500 TE682608102290 ø250 500 623 596 124 345 200 35 500 TE682608102610 ø250 500 661 639 142 345 200 35 550 S M TE682608102930 ø250 500 661 639 142 345 200 35 550 TE682608103250 ø250 500 787 748 147 345 200 35 600 TD 604-008 TE682608103570 ø250 500 787 748 147 345 200 35 600 TE682608103890 ø300 700 1050 998 169 410 250 35 650 TE682608104210 ø300 700 1050 998 169 410 250 35 650 TE682608104530 ø300 700 1050 998 169 410 250 35 700 TE682608104850 ø300 700 1050 998 169 410 250 35 700 TE682608105170 ø300 700 1050 1021 179 410 250 35 700 TE682608105490 ø300 700 1050 1021 179 410 250 35 700 GearedDrive - Sealing arrangement - With Lantern TE682608100850 ø250 475 623 596 124 345 200 30 300 TE682608101170 ø250 475 623 596 124 345 200 30 350 TE682608101490 ø250 475 623 596 124 345 200 30 400 TE682608101810 ø250 500 623 596 124 345 200 30 450 TE682608102130 ø250 500 623 596 124 345 200 30 500 TE682608102450 ø250 500 623 596 124 345 200 30 500 TE682608102770 ø250 500 661 639 142 345 200 30 550 TE682608103090 ø250 500 661 639 142 345 200 30 550 TE682608103410 ø250 500 787 748 147 345 200 30 600 TE682608103730 ø250 500 787 748 147 345 200 30 600 TE682608104050 ø300 700 1050 998 169 410 250 40 650 TE682608104370 ø300 700 1050 998 169 410 250 40 650 TE682608104690 ø300 700 1050 998 169 410 250 40 700 TE682608105010 ø300 700 1050 998 169 410 250 40 700 TE682608105330 ø300 700 1050 1021 179 410 250 40 700 TE682608105650 ø300 700 1050 1021 179 410 250 40 700 ØP ØP ØD ØD S ØF ØF M Ø Ø TD 604-006 Other OptionsProduct code: 5508 TE2603023190 Welding flanges for tank connection ø250 TE2603022590 ø300 TE2603050080 ø400.1063
LS - Side Mounted gitator Product code: 5504 Tank gitators and Mixers LS Standard configuration Technical Data Surface finish: Mechanical polish Ra<0.8 μm Prepared for frequency duties with: PT (Thermistors) Motor Protection lass IP55 Motor olor RL 5010 GearedDrive oaxial gear Propellers 3- bladed Energy Saving Foils (EnSaFoil) Material: earing house Stainless steel Mounting flange ISI 316L Product contact parts (Stainless steel) ISI 316L Product contact parts (Rubber parts) EPDM / FEP Mechanical Sealing (DirectDrive) arbon (FD) / Silicium arbide Mechanical Sealing (GearedDrive) Silicium arbide / Silicium arbide RPL EUR Motor size [kw] 0.25-0.75 1.1-2.2 3.0 to 4.0 0.25-0.55 0.75 1.5-2.2 3.0-4.0 0.75-1.1 2.2 4.0-5.5 11 Description Options Material certificates 3.1 acc. EN 10204 (for parts with product contact) including FD onformity statement acc. 21 FR 177 for gaskets and elastomers Food approved oil USD-H1 - dd-on price (Only geared models) Stainless Steel Motor over - dd on price (geared models) Stainless Steel Motor over - dd on price (direct drive models).1064
Tank gitators and Mixers Product code: 5504 LS - Side Mounted gitator Options TEX TEXin tank II1GDcTX, II2GDcTX or II3GDcTX TEXoutside tank II2GDcTX or II3GDcTX gitators can be delivered approved for TEX environment with declaration of conformity according to directive 94/9/E, approved according to TEX categories Surface finish Less Sanitary application Shot peened propellers For high Sanitary application Mechanical polished with succeeding electropolish Material Product contact parts (Stainless steel) ISI 304L (Lower than standard), ISI 904L, SF 2205 Product contact parts (Rubber parts) EPDM / FEP (Depending on product) Mechanical Sealing (GearedDrive) Other options available Various options Voltage and Frequency: ll motors voltages and frequencies are available Seal rrangements: Many variations - see PD Sheet Drive: Type of drive unit. Ex. right angle gear Propellers: 2- or 3- bladed Energy Saving Foils (EnSaFoil).1065
IM 10 Rotary Jet Mixer Product code: 5509 Mixer Product code: 5546 Welding daptor Product code: 5548 Tools Tank gitators and Mixers Surface treatment: right RPL No. of Nozzles/ Flow at 5 bar EUR Dimension Dimension (mm) onnection PEEK m 3 /h E F Thread (1 Rp-female (SP)) TE30030 7 4 x ø3.9 230 36 16 100 TE30040 9.5 4 x ø4.6 230 36 16 100 TE30050 12 4 x ø5.5 230 36 16 100 PEEK TE30N030 7 4 x ø3.9 230 36 16 100 TE30N040 9.5 4 x ø4.6 230 36 16 100 TE30N050 12 4 x ø5.5 230 36 16 100 Thread (1 NPT-female) TE52D030 TE52D031 TE52D032 onnection Welding adapter for IM 10 1 Rp-male (SP)/1 ISO thread pipe (OD = 33.7 mm) 1 NPT-male/1 NSI pipe (OD = 33.4 mm) 1 Rp-male (SP)/1½ dairy pipe (OD = 38 mm) Gasket is included TE300XX-70 TE30N0XX-70 TEX TEX dd-on prices TE81085 explanation TE300XX-70 TE30N0XX-70 Standard tool kit aliper (1 piece) Socket wrench with pin (1 piece) Spanner for IM 10, TJ20G and MultiJet 25 (1 piece) Spanner (1 piece) TD 517-016 dd-on explanation TEX approved machine for use in explosive atmospheres. atagory 1 for installation in zone 0/20 in accordance to Directive 94/9/E. EX II 1 GD c T175 Tamp0 to +140 ; aseefa10tex0188x.1066
Tank gitators and Mixers Product code: 5509 Mixer Product code: 5546 Welding daptor Product code: 5548 Tools IM 15 Rotary Jet Mixer Surface finish: right No. of RPL Flow at 5 Nozzles/ EUR bar Dimension Guide Dimension (mm) onnection Stainless Steel m 3 /h E F Thread (1½ Rp-female (SP)) TE31061 16 4 x ø6 100% 297 50 16 204 TE31071 19 4 x ø7 100% 297 50 16 204 TE31070 19 4 x ø7 0% 297 50 16 204 TE31080 22.5 4 x ø8 0% 297 50 16 204 TE31181 14 2 x ø8 100% 297 50 16 270 TE31182 19 2 x ø10 0% 297 50 16 270 TE31183 21 2 x ø11 0% 297 50 16 270 TE31166 16 4 x ø6 100% 297 50 16 204 TE31167 19 4 x ø7 100% 297 50 16 204 TE31177 19 4 x ø7 0% 297 50 16 204 TE31178 22.5 4 x ø8 0% 297 50 16 204 TE31281 14 2 x ø8 100% 297 50 16 270 TE31282 19 2 x ø10 0% 297 50 16 270 TE31283 21 2 x ø11 0% 297 50 16 270 Thread (1½ NPT-female) TE52D018 TE52D020 TE52D021 onnection Welding adapter for IM 15 1½ Rp-male (SP)/40 mm DIN pipe (OD = 40 mm) 1½ Rp-male (SP)/1½ ISO thread pipe (OD = 48.3 mm) 1½ Rp-male (SP)/2 dairy pipe (OD = 51 mm) TE31XXX-70 TE81055 Special tools TE81033 TE81129 TE81130 explanation TE31XXX-70 TEX Unbraco key for 3/16" screw (1 piece) Screw driver Unbraco 5/32" (2 pieces) 8mmsocketwrenchwithpin(1piece) dd-on prices Standard tool kit TD 517-016 Pusher for 1½" machines Pusher for collar bush, 1.5" gear frame Tool for upper collar dd-on explanation TEX approved machine for use in explosive atmospheres. atagory 1 for installation in zone 0/20 in accordance to Directive 94/9/E. EX II 1 GD c T175 Tamp0 to +140 ; aseefa10tex0188x.1067
IM 20 Rotary Jet Mixer Product code: 5509 Mixer Product code: 5546 Welding adapter Product code: 5548 Tools Tank gitators and Mixers Surface finish: right RPL No. of Nozzles/ Flow at 5 bar EUR Dimension Guide Dimension (mm) onnection Stainless Steel m 3 /h E F Thread (2 Rp-female (SP)) TE32081 23 4 x ø8 100% 356 65 16 268 TE32091 27.5 4 x ø9 100% 356 65 16 268 TE32090 27.5 4 x ø9 0% 356 65 16 268 TE32100 32.5 4 x ø10 0% 356 65 16 268 TE32112 24 2 x ø12 0% 356 65 16 337 TE32113 28 2 x ø13 0% 356 65 16 337 TE32115 37 2 x ø15 0% 356 65 16 337 TE32181 23 4 x ø8 100% 356 65 16 268 TE32191 27.5 4 x ø9 100% 356 65 16 268 TE32190 27.5 4 x ø9 0% 356 65 16 268 TE32200 32.5 4 x ø10 0% 356 65 16 268 TE32212 24 2 x ø12 0% 356 65 16 337 TE32213 28 2 x ø13 0% 356 65 16 337 TE32215 37 2 x ø15 0% 356 65 16 337 Thread (2 NPT-female (SP)) J H leaning unit TE52D140 leaning unit for IM 20, 2" Rp (SP) 2" Rp 210 TE52D240 leaning unit for IM 20, 2" NPT 2" NPT 210 TE52D025 TE52D026 onnection Welding adapter for IM 20 2 Rp-male (SP)/2 ISO thread pipe (OD = 60.3 mm) 2 Rp-male (SP)/2½ dairy pipe (OD = 63.5 mm) Gasket is included TE31XXX-70 TE81055 Special tools TE81031 TE81032 TE81130 TE81132 explanation TE32XXX-70 TEX Unbraco key for 3/16" screw (1 piece) Screw driver Unbraco 5/32" (2 pieces) Unbraco key for 1/4" screw (1 piece) Screw driver Unbraco 1/4" (1 piece) aliper (1 piece) Socket wrench with pin (1 piece) dd-on prices Standard tool kit Pusher for gear frame Fixture set for gear frame Tool for upper collar Tool for lower collar dd-on explanation TEX approved machine for use in explosive atmospheres. atagory 1 for installation in zone 0/20 in accordance to Directive 94/9/E. EX II 1 GD c T175 Tamp0 to +140 ; aseefa10tex0188x TD 517-016.1068
E Tank gitators and Mixers Product code: 5509 Mixer Product code: 5548 Tools IM 25 Rotary Jet Mixer Surface treatment: right RPL No. of Nozzles/ Flow at 8 bar EUR Dimension Guide Dimension (mm) onnection Stainless Steel m 3 /h F Thread (2½ Rp-female (SP)) TE33034 38 2 x ø15 0% 286 80 337 TE33036 42 2 x ø17 0% 286 80 337 TE33038 51 2 x ø19 0% 286 80 337 TE33040 54 2 x ø21 0% 286 80 337 F TD 523-227 TE330XX-70 TE81065 Special tools TE81031 TE81032 explanation TE330XX-70 TEX Other connection available on request Unbracokeyfor3/16"screw(1piece) Screw driver Unbraco 5/32" (2 pieces) Unbraco key for 1/4" screw (1 piece) Screw driver Unbraco 1/4" (1 piece) aliper (1 piece) dd-on prices Standard tool kit TD 517-016 Pusherforgearframe Fixture set for gear frame dd-on explanation TEX approved machine for use in explosive atmospheres. atagory 1 for installation in zone 0/20 in accordance to Directive 94/9/E. EX II 1 GD c T175 Tamp0 to +140 ; aseefa10tex0188x.1069