A range of high technology lubricants dedicated to agriculture LUBRICANTS DEDICATED TO AGRICULTURE TOTAL Lubricants Pottery Lane, Ferrybridge, West Yorkshire WF11 8JY Tel: 01977 636292 Fax: 01977 677692 email: lubesorders@total.co.uk www.lubricants.total.com The right choice for lubricants
1 FE motor oil TRACTAGRI HDZ FE or TRACTAGRI HDX SYN FE or TRACTAGRI HDX FE 15W-30 Fernand Prudent, President of the Genlis CUMA, carried out tests on his 165 hp tractor himself: We could feel the increase in power with very positive results while driving, particularly when tackling inclines - which we did in the same conditions every time. The fuel savings are significant for the CUMA - for 4 tractors, we save around 3000 L per year. + TOTAL has extended its product range and services for the Agricultural sector with a complete range of products dedicated entirely to farming. To meet the increasingly sophisticated technological demands of the agricultural sector, Total has designed a range of cost effective, innovative products that allow the agricultural industry to improve its productivity during the most critical times of the year. 6%up to 1 FE transmission oil of fuel economy* DYNATRANS VX FE Full-scale tests at the Burgundy CUMA, the cooperative for the use of agricultural equipment (France) Franck Loriot, Machinery Adviser at the Burgundy Regional Federation of CUMAs: It s true that if you compare a traditional lubricant to a Fuel Economy lubricant, you ll see on the power test bench that a Fuel Economy lubricant can provide an extra 8 hp on power take-off, at maximum power. The tractor is freer, meets less resistance and so goes a little faster for the same amount of work or the same level of fuel consumption. * Average fuel savings generated during tests carried out at the Burgundy CUMA on a 165 hp tractor, compared with the fuel consumption measured when using standard 15W-40 lubricants for both the engine and the transmission system. Fuel savings generated: 5.1% on roads, 5.8% in fields and 7.1% on a power test bench. Engine Lubricants Fuel Economy Lubricants: TRACTAGRI HDZ FE > High thermal stability ensures excellent lubrication of hot engine parts particularly during severe and extended working periods. > Its Low SAPS formulation is compatible with all exhaust gas post treatment systems and particularily suited to maintaining the effectiveness of Diesel Particulate Filters. > Specific formulation which enables fuel savings. Suitable for most major makes and models. TRACTAGRI HDX SYN FE > Withstands very long working periods under high temperature and high load. > Combines a very high technical performance level with real fuel economy. > Provides a notable reduction in engines fuel consumption. TRACTAGRI HDX FE 15W-30 > Exceptional anti-wear and anti-corrosion properties. > Improved equipment life under high temperatures and load particularly during peak production periods. TRACTAGRI HDX SYN 10W-40 High performance semi synthetic lubricant for agricultural engines operating in the most extreme conditions. > Excellent stability of the viscosity in service > Outstanding protection against wear > High levels of detergency and dispersivity TRACTAGRI HDX 15W-40 High performance lubricant for tractor engines operating in all conditions and in all seasons. > Excellent in service viscosity stability > Excellent oxidation resistance ACEA: E9/E7 (E5) API: CJ-4/CI-4 plus/ci-4/sm MB-Approval 228.31 DEUTZ: DQC III-LA-10 CUMMINS: CES 20081 Conform to CATERPILLAR: ECF-3/ECF-2/ECF-1a JOHN DEERE: JDQ 78X ACEA: E4/E5/E7 API: API CF / SL MB-Approval 228.5 DEUTZ: DQC III-05 ACEA: E7/E5 API: CI-4/SL MB-Approval 228.3 CUMMINS: CES 20078 (20077) DEUTZ: DQC II-05 Conform to CATERPILLAR: ECF-2 ACEA: E7/E5, A3/B4/B3 API: CI-4/CH-4/SL MB-Approval 228.3 CUMMINS: CES 20078 (20077/20076) DEUTZ: DQC III-05 > Easier start-up at ultra low temperatures > Perfectly suited for the lubrication of low emission engines (European phase I, II or IIIa) ACEA: E7/E5 API: CI-4/CH-4/SJ MB-Approval 228.3 CUMMINS: CES 20078 (2007/20076) > Perfectly suited for the lubrication of low emission engines (European phase I, II or IIIa) 3
API GL-4 Meets the manufacturer s approvals: VOLVO CE WB 102 JOHN DEERE JDM J 20D KUBOTA: S UDT UTTO - Transmission Lubricants (Universal Tractor Transmission Oil) DYNATRANS VX FE High performance, synthesis technology lubricant for axles equipped with wet brake system. > Suitable for the majority of agricultural equipment allowing rationalisation of products > Careful additive selection reduces friction and allows greater fuel economy > Excellent load carrying capacity protects gears and extends the life of transmission and hydraulic components > Synthetic base stock extends product life API: GL-5-LS MIL.L.: 2105D ZF: TE-ML 05C/12C/16E Transmission Lubricants DYNATRANS DA 80W-90 Lubricant for axles equipped with limited slip differential systems. > Guarantees high cleanliness of the limited slip discs > Prevents noise and vibration under intensive use > Careful selection of extreme pressure additive ensures maximum protection of gears and components > Excellent compatibility with disc friction materials > Compatible with seal materials API: GL-4 MASSEY FERGUSSON: CMS M 1145/1143 VOLVO CE: WB 101 ZF: TE-ML 03E/05F/06K/17E DYNATRANS MPV Lubricant for transmissions, oil-immersed disc brakes and hydraulic systems on agricultural tractors. > Special friction additive for brakes and immersed clutches > Excellent in service stability > Good shear resistance DEXRON III G FLUIDE G3 Lubricant for automatic transmissions or systems requiring the use of an ATF fluid. > Special friction properties to control slip and allow clutches to operate smoothly > Excellent compatibility with elastomers and non-ferrous metals (copper, etc) > Precise shifting even at low speeds API: GL-4 ZF: TE-ML 06F MASSEY FERGUSSON: CMS M 1145 DYNATRANS CVT Special lubricant for continuously variable transmissions (CVT) used in agricultural tractors. > Smooth transmission operation > The ultimate anti-wear performance > Wide scope of applications API GL-5 TRANSMISSION TM 80W-90 / 85W-140 Mineral gear oil. API:GL-4 M2C 86B / 86C DYNATRANS FR Lubricant for agricultural vehicle transmissions with oil immersed brakes and hydraulic systems. Excellent resistance to foaming. > Special friction characteristics for brakes and immersed clutch plates > Added gear protection > High anti-foam power API GL-4 MAN 341 type E-1 / Z-2 ZF TE-ML 02A, 16A, 17A, 19A > Extreme pressure properties for optimal protection of heavily loaded gears > Good level of anti wear, anti corrosion protection EP 80W-90 Gear oil. > High viscosity index, ensures fluidity and smooth gear change at low temperatures whilst maintaining enough film thickness for optimal bearing protection > Very good resistance against thermal ageing and excellent shear stability > Formulated with pour point depressant additives to allow better fluidity at low temperature > Good extreme pressure and anti wear properties maintain life of gears and synchromeshes > Good anti wear, antioxidant and corrosion resistance properties 4 5
ISO: VG 46 ISO: 6743/4-HV AFNOR: NF 48-603 HV DIN 51524 P3 HVLP ISO: VG 32/46/68 AFNOR: NF E 48-603 HV DIN 51524 P3 HVLP BIODEGRADABLE BIOHYDRAN SE * ISO: VG 32/46/68 15380 HEES Registration number FR/27/002 ECOLABEL CERTIFICATION. Contributes to reducing water contamination and resource consumption. Reduces carbon dioxide emissions. Hydraulic Lubricants EQUIVIS ZS 46 Hydraulic oil specially designed for hydrostatic and hydraulic systems exposed to wide temperature variations. > High viscosity index ensures consistent operation and easy start up at all temperatures AZOLLA ZS 32-46-68 High performance hydraulic oils. > Lubricant specially designed for hydraulic systems operating under normal temperature and pressure conditions High thermal stability biodegradable hydraulic fluid. > BIOHYDRAN SE has a natural high and stable viscosity index. No viscosity loss on shear is observed. This stable viscosity properties ensure optimum hydraulic efficiency during the fluids life > Good lubrication properties and protection against corrosion ensure maximum service life of the hydraulic system > Excellent oxidation stability offers extended drain intervals compared to mineral hydraulic fluids. > Very high shear resistance > Good compatability with seal materials > Good compatability with seal materials ACEA: E3 MASSEY FERGUSSON: CMS M 1145/1144 ZF: TE-ML 068/07B ACEA: E1 MASSEY FERGUSSON: CMS M 1144 ZF: TE-ML 068/07B API: CD/SE MASSEY FERGUSSON: CMS M 1144 API: GL4 STOU - Multifunctional Lubricants (Super Tractor Oil Universal) MULTAGRI PRO-TEC 10W-40 Multi-purpose high performance lubricant for the lubrication of engines, transmissions and hydraulic systems in agricultural equipment. > Outstanding wear resistance > Suitable for rationalised maintenance programmes in older equipment MULTAGRI SUPER > High level of detergency and dispersivity Multi-purpose agricultural lubricant intended for the lubrication of engines, transmissions and hydraulic systems in older vehicles. > Good anti-wear power > High Extreme Pressure property MULTAGRI TM 15W-30 > Wide variety of applications Multi-purpose agricultural lubricant intended for older agricultural equipment. > Good wear properties Milking machine Lubricants *Please see the TOTAL Biolubricants brochure for further information. BIODEGRADABLE BIOHYDRAN TMP * ISO: VG 32/46/68 15380 HEES Registration number FR / 27 / 02 ECOLABEL CERTIFICATION. Reduced harm for water and soil. Reduced carbon dioxide emissions. 6 Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria. > Produced with renewable raw materials, BIOHYDRAN TMP helps contribute to CO2 emission reduction. > High natural viscosity index gives BIOHYDRAN TMP a wide temperature operating range (-20 C to 80 C) > Excellent lubrication properties in conjunction with corrosion prevention will help to extend the hydraulic system life ISO: VG 68 AGRITRAITE Lubricant for the vacuum pumps of milking machines (vane pumps, screw pumps, ROOTS type rotary piston pumps). > Shear-free > Very good anti-wear properties > Perfect neutrality with relative to seals 7
Horticultural Lubricants Greases API: TC JASO: FD ISO: L-EGD (detergency level) API: TC GARDEN 2T SYN Multi-purpose high performance lubricant for the lubrication of engines, transmissions and hydraulic systems in agricultural equipment. > Formulated for use in 2 stroke engines operating under severe conditions and very high temperatures > Maximum reduction of smoke emissions GARDEN 2T Z > Enhanced combustion characteristics eliminates deposit build up Lubricant for the 2-stroke engines used in mechanized farming. > Viscosity tailored for use in pre mixed or in separate lubrication systems > Pre-diluted to ensure a stable mixture > Very good corrosion and wear resistance ISO 6743-9: L-XBCHB 2 DIN 51502: KP2K-20 ISO 6743-9: L-XBDHB 2 DIN 51502: KP2K-25 CERAN XM 220 Multi-purpose Extreme Pressure grease with lithium/calcium base. > Highly viscous base oil specially adapted for highly loaded and low speed applications > Can be mixed with most conventional soap-based greases > Excellent mechanical stability preventing any loss of integrity or consistency when in operation > Excellent adhesive power on metal > Good thermal stability with very high resistance to varying temperatures MULTIS COMPLEX EP 2 Multi-purpose Extreme Pressure grease with lithium/calcium soap. API: SL ACEA: A3 GARDEN 4T SYN 10W-40 > Long-lasting lubricant film in service to help reduce maintenance costs and down time > Can be mixed with most conventional soap-based greases > Excellent mechanical stability preventing any loss of integrity or consistency when in operation > Excellent adhesive power on metal > Good thermal stability, very good resistance to varying temperatures > Does not contain lead or any other heavy metals classified as hazardous to health or the environment Synthetic based lubricant for gasoline 4-stroke engines used in severe applications of mechanized farming. > Good thermal stability > Very good wear and corrosion resistance > Maintains multigrade properties over duration of the product life lubrication systems ISO 6743-9: L-XCBEB00 DIN 51502: GP00G-30 MULTIS EP 00 - EP 2 Multi-purpose lithium/calcium greases with Extreme Pressure properties. > Long-lasting lubricant film. Extended life cycle of the lubricated parts > Remarkable pumpability > Can be mixed with most conventional thickening agents AFNOR NFR 15-601 ASTM D 3306 ASTM D4656 ASTM D4985 BS 6580 8 Coolants / Antifreeze COOLELF AUTO SUPRA -37 C Ready to use long life coolant based on organic corrosion inhibitors. Meets the requirements of most engine manufacturers. BIODEGRADABLE BIOMULTIS SEP 2 ISO 6743-9: L-XDDEB 2 DIN 51502: KP2N-35 Biodegradable multi-purpose Extreme Pressure grease made from lithium/calcium soap recommended for applications in case of high temperatures and difficult conditions. > Good mechanical and thermal stability > Wide range of applications to rationalise inventory and facilitate maintenance > Long-lasting lubricant film 9 *Please see the TOTAL Biolubricants brochure for further information.
ANAC ANAC is a management tool for agricultural equipment Procedure for switching your equipment over to BIO The ANAC service consists in making a diagnosis of mechanical components (engine, transmissions, hydraulic) from oil samples taken in service. Analyses are carried out on our expert system which assesses the condition of each component in comparison to a reference. This system takes factors such as oil change intervals and any lubricant top up into consideration. YOUR ADVANTAGES: > Decrease equipment downtime and limits the chance of mechanical damage > Optimised maintenance intervals > Longer life cycle and reliability for your equipment > Increased productivity The results of these analyses are then presented along with the history of previous assessments, thus offering an ability to track your equipment. DIAGNOSIS REPORT ANAC MAKES A DIFFERENCE! Database on more than 4 million performed analyses, over 400.000 parts in follow up. Database on feedback of successful interventions after ANAC diagnosis. Specific and personalised comments. User friendly website for management of diagnosis data. Reports available by post, e-mail, fax or Internet. More than 40 years of experience. Reports available in 19 languages. ANAC PRO The in-depth diagnostics system for driveline components 10 ANAC PRO is an in-depth, personalised diagnosis system for engines, gearboxes and other driveline components. ANAC PRO is recommended for: Detailed follow-up of component wear and lubricant behaviour. Spot analysis and diagnosis in special cases (breakdowns, claims, expertise ). Analysis of new lubricants. DIAGNOSIS AND COMMENTS The diagnosis and comments are established by an ANAC technician, specialised in engine and lubricant technology, aided by the ANAC database with reference data of all current part types, calculated on over 3 million performed analyses. Also the database of feedback on successful corrective actions by the users is at the disposal of the ANAC PRO technician. The ANAC PRO technician takes into account the specific knowledge on the usage conditions and possible remarks by the user. Personalised answers on questions by the users. www.anac-diagnosis.com A website with personalised and secure access to the results of analyses of your oils. 11