PERFORMALOC 9000 Advanced Productivity Coatings from PPG

PERFORMALOC 9000 Advanced Productivity Coatings from PPG

Performance Coatings that Loc Offering its users color and gloss retention that surpasses most 2-comp coatings are manufactured from proprietary, cross-linked resins that cur This resin system makes the coating system a superb cho do not have baking capabilities. OEMs will also save energy costs by re The New Series Developed to meet the demanding needs of industrial OEMs, the new 9000 coatings series is a two-component, high-solids and high-gloss ambient cure coating. Used as an interior/exterior protective coating over iron/zinc phosphate treated and primed surfaces, this exceptionally tough and durable coating can be used to protect trailers, farm equipment, heavy-duty equipment, locomotives, tractor parts, lift trucks, trailer doors, trailer truck lift gates and trailer hitches. Like other products in the coatings line, this top-of-the-line coating dries to the touch and cures quickly, eliminating the need for force drying and curing ovens in most cases and increasing shop throughput. 9000 coatings offer excellent UV, chemical, salt spray and humidity resistance, all encapsulated in brilliant, long-lasting color that retains its gloss for years to come. 9000 coatings are environmentally compliant as well, with low VOCs, no heavy metals and no SARA 313 constituents. Features Advantages Key Benefits Super-fast cure Excellent mar, solvent and chemical resistance Excellent exterior UV color and gloss retention VOC = 2.8 lbs./gal., no reportable HAPs or SARA 313 constituents Excellent performance with thin-film coating (<3.0 mils DFT topcoat) Faster tape time, less bottlenecks in the paint shop, faster service time Looks better and lasts longer in industrial environments Looks better and lasts longer in exterior environments Formula contains exempt solvents. For use in CA, check the Environmental Data Sheet (EDS) and your local county listing for exempt status. Applies at the same millage as a conventional solids coat, but with better performance Lower labor costs, increased production and throughput Less maintenance and lower repair costs for the end customer Less repainting and lower cost for the end customer Helps meet regulatory compliance requirements Less maintenance and longer service life for the end customer

k out the Elements onent polyurethane coatings systems, e extremely fast and offer excellent film properties. ice for OEM companies that manufacture metal parts and ducing or eliminating their force drying or baking process. All-Weather Performance 9000 coatings retain gloss and color better than traditional, two-component urethane coatings when exposed to accelerated weather testing. 9000 coatings retain over 95% of their gloss at the performance benchmark of 1,400 hours of exposure and over 85% at 2,000 hours of exposure. * Chart trend lines show the average of multiple test samples. 100% 90% 80% 70% 60% 50% 40% 30% 20% 200 Xenon Arc Weatherometer Testing* % Gloss Retention / Hours of Exposure 400 600 with Added UV 800 1,000 1,200 1,400 1,600 1,800 2,000 Efficient Curing Whether you prefer ambient or baked curing, 9000 coatings will save you time and money versus standard, two-component urethane coatings. 9000 coatings ambient cure time at 70 F is 75% faster than urethane, and its temperature for a 30-minute bake is 33% lower. Curing Performance Time for Ambient Cure (70 F) Temp. for 30 Min. Bake >3.75 Hrs. <1.0 Hrs. 180 F 120 F Beyond VOC Compliant As VOC restrictions continue to tighten, 9000 coatings meet the challenge by exceeding most national and local regulations and anticipating future trends in legistlation. 9000 coatings have 2.1-2.8 lbs./gal. VOC less exempts.** <3.5 Current Federal s <2.8 Some Local s Volatile Organic Compounds lbs. / gallon 3.1 2.1-2.8** ** Because the formula may need to be optimized for a specific type of application equipment, the VOC range may change slightly.

Performance and Physical Properties 9000 coatings excel when performance is tested against recognized ASTM standards. All tests are performed using B1000 iron phosphatepretreated, cold-rolled steel substrate with the PPGrecommended 2K epoxy or 2K urethane primer and 9000 coating. Performance Property Color Gloss @ 60 / Gloss @ 20 Method N/A ASTM 523 Result Custom factory grind colors only no tint base 90 units / 84 units Pencil Hardness ASTM 3363 H minimum Adhesion ASTM 3359 Excellent: 5B adhesion Impact: Direct / Reverse Mandrel Bend (1/8 ) ASTM D2794 ASTM D522 Chip Resistance ASTM 3170 7 rating Humidity Resistance 1,000 hrs. Salt Spray Resistance 1,000 hrs. Chemical Resistance Solvent Resistance Abrasion Resistance ASTM D2247 ASTM B117 ASTM D1308 ASTM D5402 ASTM D4060 80 in. lbs. / 80 in. lbs. No cracks, 180 Excellent: no blisters, 5B adhesion, no gloss loss Excellent: 6A rating with medium blisters at scribe No effect for xylene, 10% NaOH, hydraulic oil, gasoline, diesel fuel, water, 50% ethylene glycol or motor oil Passes 100+ double rubs with methyl ethyl ketone (MEK) 55 mg. loss (CS-10 wheel and 1000 gr. wt.) Physical Property Blended Value* Weight per Gallon 9.6 ± 1.0 lbs. / gal. Weight Solids (%) 73 ± 4 Volume Solids (%) 65 ± 3 VOC (Less Exempts) 2.8 lbs. / gal. VOE (Emissions Actual) 2.0 lbs. / gal. Coverage (@ 1.0 mill, No Loss) Blend Ratio 1.5 : 1 * Values listed are color dependent. 995 1,091 sq. ft. / gal.

A Global Partner 9000 coatings are just one of many products available from PPG Industries, the largest coatings company in the world. PPG s global manufacturing and product development capabilities ensure that coatings can be manufactured costeffectively and consistently almost anywhere in the world. PPG provides a full range of customer support services provided by knowledgeable sales, technical and manufacturing personnel trained in multiple coating technologies at strategic locations throughout North America, South America, Europe and the Asia/Pacific region. For more information about 9000 coatings or to learn about how PPG can help you find the right coatings solution for your business, call your PPG sales representative or contact us using the information below. Regional Headquarters Manufacturing Facility Design Studio PPG Regional Headquarters PPG Global Headquarters / PPG North America Pittsburgh, PA USA 1.888.774.2001 PPG South America Sumare, Sao Paolo, Brazil + 55.19.3864.6000 PPG Europe Rolle, Switzerland + 41.21.822.30.00 PPG Asia Pacific Hong Kong, China + 852.2861.0918 2015 PPG Industries, Inc. All rights reserved. 01/15 IC042 The PPG Logo is a registered trademark and Bringing innovation to the surface is a trademark of PPG Industries Ohio, Inc. PPG Industrial Coatings One PPG Place Pittsburgh, PA 15272 USA North America 1.888.774.2001 ic-na@ppg.com ppgindustrialcoatings.com