Internet store of autogoods

Similar documents
Internet store of autogoods

M LCD display,7-stage switch mode charging current

Caution Wear protective glasses and turn your face away when connecting or disconnecting from the battery.

Internet store of autogoods

8-STAGE AUTOMATIC BATTERY CHARGER MCU CONTROLLED - HIGH FREQUENCY SWITCHMODE MODELS: KACHG1207, KACHG1212, KACHG1220, KACHG2410. Instruction Manual

INTELLI-POWER BATTERY CHARGER 12 VOLT, 7 STAGE SWITCHMODE. P/No.s IC700, IC700W, IC1000, IC1500

7 Stage Automatic Smart Battery Charger (FOR CHARGING 12V / 24V AGM, GEL,SLA AND WET BATTERIES) USER MANUAL

BC12M248 7 Stage Automatic Smart Battery Charger, Desulfator & Maintainer 12V, 2 / 4 / 8A FOR AGM, GEL AND WET BATTERIES USER MANUAL

2012 Battery Chargers Program

INTELLI-CHARGE BATTERY CHARGER 12 VOLT, 7 STAGE SWITCHMODE

BS20 BATTERY CHARGER For lead-acid batteries

MP V 8A Electronic Smart Charger. Instruction and Information Manual

15Amp Intelligent Battery Charger Suitable for SLA, Gel, Maintenance Free, AGM, Deep Cycle batteries

CONGRATULATIONS ON YOUR PURCHASE OF YOUR THUNDER BATTERY CHARGER! For your personal safety read, understand and follow the information provided in

OWNER S MANUAL. BatteryCharge FOR MODELS BC15 + BC25.

Smart Charger SBC User s Manual

BATTERY CHARGER Plus Battery maintainer & Rejuvenator

12/24V 30A AUTOMATIC/MANUAL WORKSHOP BATTERY CHARGER

8 Step Fully Automatic Intelligent BATTERY CHARGER 12V 5A USER S MANUAL. Charges & Maintains. Flooded (WET), MF, VRLA, AGM, GEL & Calcium batteries

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC

Smart Charger SBC12V5A User s Manual

INTELLI-CHARGE BATTERY CHARGER 7 STAGE SWITCHMODE

12V/25A BATTERY CHARGER MAINTAINER / JUMPSTARTER

BK10 10 CHANNELS BANK CHARGER For 12V lead-acid batteries

TRICKLE CHARGER MODEL NO: ATC12VB OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS LS0618 ISS 2

MANUAL (EN 7.12) (IEC 7.12 Ed.5)

M200. Battery Charger. For lead-acid batteries. User Manual and Guide to professional charging of starter and deep cycle batteries.

Battery Charger XT EXTENDED. For lead-acid batteries. User Manual and Guide to professional charging of starter and deep cycle batteries.

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS

MANUAL. Note: If the charger indicates START POWER VOLTAGE CHECK PROGRAM lamp and BAD lamp press MODE-button for 2 sec to exit VOLTAGE CHECK PROGRAM.

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC

INTELLIGENT BATTERY CHARGER/MAINTAINER

OPERATION & MAINTENANCE INSTRUCTIONS

Design Features: User Manual. 1. PFC function. 2. LCD remote control. 3. Battery temperature sensor function.

Smart 110 with built-in flashlight for 6 240Ah lead-acid batteries

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC

Owner s Manual. Contents GP-PWM-10-SQ

Chapter 3. Direct Current Power. MElec-Ch3-1

SBC / 2140 / Stage Battery Charger User Manual

Owner s Manual. Contents GP-PWM-30-SQ GP-PWM-30-SQ

BatteryMINDer 1500* & BatteryMINDer Plus 1510*

M300. Battery Charger. For lead-acid batteries. User Manual and Guide to professional charging of starter and deep cycle batteries.

FUM-24xxCBP Series 3 Stage Battery Charger User Manual

DIAGNOSTIC POWER SUPPLY WSC 720. user guide. 12 V/24 V lead acid batteries ah

Micro. Fully charged. Charging Keepower MICRO Nominal battery voltage 12V Charge current 0.8 A. Keepower Battery Charger.

MA20DC MA20DCS 20 AMP, DC TO DC BATTERY CHARGER 20 AMP, DC TO DC BATTERY CHARGER WITH SOLAR INPUT

Digital Intelligent Battery Charger OPERARATOR S MANUAL

OWNER S MANUAL. Model YUA2AMPCH 2 AMP Dual-Bank Automatic Battery Charger & Maintainer READ ENTIRE MANUAL BEFORE USING THIS PRODUCT

MaNUaL. to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional

CTEK XC 800 Battery charger

Clamps. Eyelets M8. Temperature sensor female connector. Battery cable female connector - 2

USER GUIDE 12 V Lead acid batteries Ah

Models: SP3, SPSS3 Automatic Battery Charger

Art. No. EC-315. Art. No. EC-330. Art. No. EC-340 SWITCH-MODE BATTTERY CHARGER CONTENTS IMPORTANT SAFETY PRECAUTIONS... 2

12 Volt 1500 ma Convertible Charger - Maintainer - Desulfator*

HIGH FREQUENCY AUTOMATIC BATTERY CHARGER

c-go 24V/6A 24V/8A 24V/12A

c-go 12V/10A 12V/20A Power supply and battery charger Instruction manual

80W &100W Folding Solar Panel Kit

Bosch C3 and C7 Battery Chargers: Smart, safe and simple to use

CTEK XS 800 Battery charger

Low Frequency Inverter. User Manual

BATTERY CHARGER BTC-1005A

MANUAL XS 0.8. CHARGING Connect the charger to the battery.

USER MANUAL 12V 4.3A 5 YEAR WARRANTY. FOR ALL 12V TYPES OF LiFePO 4 BATTERIES FULLY AUTOMATIC

Solar Controller / Battery Charger User s Manual

C3 Operating Instructions

PSJ-2212, PSJ-3612, PSJ-4424

SP6. Automatic Battery Charger. Model

MANUAL EN 3 MAINS CABLE ABSORPTION, READY TO USE ANALYSE FLOAT, FULLY CHARGED PULSE, MAINTENANCE CHARGING BULK DESULPHATION SOFT START.

MANUAL. HOW TO CHARGE 1. Connect the charger to the battery. Read safety instruction

12V 160A/24V 185A MANUAL WORKSHOP BATTERY CHARGER

1. Connect the charger to the battery. 3. Press the MODE-button to select charging program.

Part Number: DBDC10 / DBDC20 DC to DC Dual Battery Charger Manual

Acura NSX 2016 Honda Motor Co., Ltd All rights reserved. BAM

110W CARAVAN SOLAR PANEL KIT PLU

ENGLISH SAFETY INSTRUCTIONS. Recommendations for safe operation. Operator safety. General warnings

Deltran Battery Tender 6V/12V 4Amp 5 & 10 Bank Battery Management System TABLE 1. Length of Cord, Feet AWG Size of Cord

Thank you for purchasing a keepower XL-pro battery charger, a choice that. Before charging, please read the operating instructions.

12 amp RMS Battery Charger

Part Number: DCDC10S / DCDC20S DC to DC Dual Battery Charger Manual

Smart Battery Charger

CONGRATULATIONS ON THE PURCHASE OF YOUR THUNDER BATTERY BOX

Item No. : Power Dome LT. User s Manual

CONGRATULATIONS ON THE PURCHASE OF YOUR THUNDER DC TO DC BATTERY CHARGER.

BC-1230P/ 1240P/ 1260P Multi-Stage Battery Chargers User Manual

CX-SERIES ADVANCED BATTERY CHARGER

Smart Charger 12-24V 60A, 1600W

Digital Mobile Charge Advanced Electronic In-Transit 4-Stage Battery to Battery Charger

WheelieSafe. WheelieSafe. User Manual. Motorized Trolley. Distributor:

Turbo M Series onboard charger

Battery Booster Pack. Instruction Manual for P/N

Owner s Manual. Solar Controller GP-PWM-30

GXSeries. User Guide DANGER

PAC 600 PAC 800 PAC 800 comfort

POWER-HUB 12 VOLT PORTABLE POWER STATION

12VDC TO 230VAC INVERTERS

FlexCharger Battery Chargers

Model: SE-4020-CA Automatic Battery Charger

Transcription:

PHONES (044) 338-0-130 (050) 332-0-130 (063) 577-0-130 (067) 353-0-130 Internet store of autogoods SKYPE km-130 CAR RECEIVERS Receivers Media receivers and stations Native receivers CD/DVD changers FM-modulators/USB adapters Flash memory Facia plates and adapters Antennas Accessories CAR AUDIO Car audio speakers Amplifiers Subwoofers Processors Crossovers Headphones Accessories TRIP COMPUTERS Universal computers Model computers Accessories GPS NAVIGATORS Portable GPS Built-in GPS GPS modules GPS trackers Antennas for GPS navigators Accessories VIDEO DVR TV sets and monitors Car TV tuners Cameras Videomodules Transcoders Car TV antennas Accessories SECURITY SYSTEMS Car alarms Bike alarms Mechanical blockers Immobilizers Sensors Accessories OPTIC AND LIGHT Xenon Bixenon Lamps LED Stroboscopes Optic and Headlights Washers Light, rain sensors Accessories PARKTRONICS AND MIRRORS Rear parktronics Front parktronics Combined parktronics Rear-view mirrors Accessories HEATING AND COOLING Seat heaters Mirrors heaters Screen-wipers heaters Engine heaters Auto-refrigerators Air conditioning units Accessories TUNING Vibro-isolation Noise-isolation Tint films Accessories ACCESSORIES Radar-detectors Handsfree, Bluetooth Windowlifters Compressors Beeps, loudspeakers Measuring instruments Cleaners Carsits Miscellaneous MOUNTING Installation kits Upholstery Grilles Tubes Cable and wire Tools Miscellaneous POWER Batteries Converters Start-charging equipment Capacitors Accessories MARINE AUDIO AND ELECTRONICS Marine receivers Marine audio speakers Marine subwoofers Marine amplifiers Accessories CAR CARE PRODUCTS Additives Washer fluid Care accessories Car polish Flavors Adhesives and sealants LIQUID AND OIL Motor oil Transmission oil Brake fluid Antifreeze Technical lubricant In store "130" you can find and buy almost all necessary goods for your auto in Kyiv and other cities, delivery by ground and postal services. Our experienced consultants will provide you with exhaustive information and help you to chose the very particular thing. We are waiting for you at the address http://

RSC608 / RESC608 8A SmartCharge with Battery Analyser Up to 3.5L RSC612 / RESC612 12A SmartCharge with Battery Analyser Up to 5.0L Instructions Retain these instructions for future reference www.ringautomotive.co.uk Ensure area is well ventilated Contents P01 P11 P21 P31 P41 P51 P61 P71 P81 P91 P101 P111 P121 P131 P141 P151 P161 Autogoods 130

1 Safety RISK OF EXPLOSION Only connect the battery leads when the mains supply is disconnected. Explosive gases may escape from the battery during the charging process. Prevent flames and sparks and provide adequate ventilation during charging. Indoor use only. Unplug the charger from the mains before breaking or making the connection to the battery. Not suitable for use with non-rechargeable batteries. In addition to the battery types and capacity detailed in the specifications, the charger is suitable for the following only: Charging only a single battery at any one time Charging rechargeable lead acid, Gel, EFB, AGM or calcium batteries with 6 cells The Ring SmartCharger automatically adjusts the charge rate applied as the battery charges. With the battery fully charged the charging process stops, as the battery naturally discharges further charge is applied until the battery is again fully charged. This is an ongoing process to ensure a safe connection for an indefinite period. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. The charger contains no serviceable replaceable parts. Not for commercial use. Autogoods 2 130

2 Contents RSC608 / RESC608 RSC612 / RESC612 AC Plug AC Plug 3 Features 1 2 Battery clips Instructions 3 4 5 6 Battery clips Instructions 1 LCD Display 2 Navigation Keys 3 AutoCharge /Memory Saver 4 Standard lead acid vehicle setting (14.4v) 5 Start Stop (AGM) vehicle setting (14.6v) 6 Fault / Incorrect Polarity Autogoods 3 130

3 Features Charging Modes Testing Modes Charging & maintenance modes Maintenance charge R(E)SC612 only 4 The Ring RSC608/RESC608/RSC612/RESC612 are all 7 stage chargers 1 2 3 4 5 6 7 Amps (A) Volts (V) Charging stages OK Check Low / Bad R(E)SC612 only Reverse Polarity Fault Performance/ completion 1. Desulphation - The automatic desulphation stage pulse charges the battery to breakdown the build up of lead sulphate crystals. These crystals occur when a battery has been discharged or left unused for a period of time. 2. Soft Start - A slow steady build up of the charging process that limits the charging current applied until the battery voltage is above 12v. 3. Bulk Charge - The main part of the charging process where 80% of the required charge is applied 4. Absorption - Charged up to full capacity with a steady decline in charging current to allow the battery to absorb more power. 5. Battery Test - The SmartCharge conducts an automatic discharge test. If further charging is required the battery recondition function is automatically selected. If fully charged the battery goes into the float stage. 6. Recondition - An additional automatic charging stage to recover deeply discharged batteries. 7. Float - The float stage maintains the battery at 100% charge without overcharging or damaging the battery, allowing the charger to be left connected to the battery for an indefinite period. Ideal for batteries used only intermittently, such as seasonally used batteries including motorcycles, caravans, boats and classic cars. Autogoods 4 130

6 Operation - Battery Charging 4 Pressing the Auto Charge function will automatically apply the fastest charge rate the battery connected can safely take. With this mode selected AUTO is displayed on the LCD display 5. Charging is complete when 100% is displayed on the LCD screen 7 Operation - Battery Analysing Battery Voltage Battery Start Power Alternator Output Battery Capacity RSC608/RESC608 * - RSC612/RESC612 * * Default charging modes Battery analysing modes operate with and without AC mains supply. Connecting the battery clips to the battery automatically activates the charger TEST Battery Analysing SET Battery Charging Mode For standard battery charging at temperatures over 5 C Increases the battery voltage to 14.4v (standard vehicle) or 14.6v (Start/Stop vehicle). Winter Mode Used for charging batteries at low temperatures (-20 C to +5 C). Increases the battery voltage to 14.6v (standard vehicle) or 14.8v (Start/Stop vehicle). Recondition Mode Applies a controlled increased charging voltage to allow recovery of deeply discharged batteries Maintenance Mode Applies to low 0.8A charging rate, ideal for long term seasonal connection 1. Press the navigation arrows to select the battery charging icon and press SET. 2. Press the navigation arrows to select the required charging mode and press SET. Pressing EXIT at any stage takes you to the first stage of the menu process. Battery Capacity is RSC612/RESC612 only. Autogoods 6 130

5 Connection 1. Ensure AC mains plug is not connected to the AC mains supply 6 Operation - Battery Charging Select the charging mode required * Default charging modes 2. For batteries inside the vehicle: Attach the red (+) battery clip to the red (+) terminal on the battery Attach the black (-) battery clip to a bolt or bracket on the engine block, away from the battery and fuel lines For batteries outside the vehicle: Attach the red (+) battery clip to the red (+) terminal on the battery Attach the black (-) battery clip to the black (-) terminal on the battery 3. The polarity check LED illuminates if the charger is connected to the battery incorrectly. i.e. the red (+) clip connected to the black (-) battery terminal. Ensure connection is correct and the Polarity Check LED is not illuminated 4. Connect mains plug to the AC mains supply and switch on. 5. After charging, disconnect the battery charger from the supply mains. Then remove the chassis connection and then the battery connection. Normal Battery Maintainance Winter Battery Start/Stop Standard Charging Charging Charging Recondition Vehicles Vehicles RSC608/RESC608 * (Up to 8A) (0.8A) * RSC612/RESC612 * (Up to 12A) (0.8A) * 1. Select the battery / vehicle type you are charging: Standard vehicle using traditional lead acid battery types (14.4v applied) Start / Stop vehicle using modern AGM battery types (14.6v applied) Battery Charging SET 2. Press the navigation arrows to select the battery charging icon and press SET. Charging & maintenance modes Maintenance charge 3. Press the navigation arrows to select the required charging mode and press SET. Pressing EXIT at any stage takes you to the first stage of the menu process. Repair Winter charge Autogoods 5 130

7 Operation - Battery Analysing Battery Voltage Mode Displays the battery voltage as a % of its capacity: Press the navigation arrows to select the battery % icon and press SET. 12.7v 100% 12.5v 90% 12.4v 80% 12.3v 70% 12.2v 60% 12.1v 50% 11.9v 40% 11.8v 30% 11.6v 20% 11.3v 10% 1. + Battery Start Power Assesses battery cranking power and recovery. Measures the voltage drop during engine starting to identify potential starting problems due to battery failure. 1. + 2. A1 + With A1 displayed press SET - measures static battery voltage 3. A2 + With A2 displayed start the vehicle engine. 4. Min battery voltage recorded during cranking displayed and good, check or bad status displayed Good >8v, check 7-8v and bad <7v Alternator Output Assesses battery cranking power and recovery. Measures the voltage drop during engine starting to identify potential starting problems due to battery failure. 1. + = A1 displayed 2. (Rev engine to 3000rpm*) + Maintain revs during 10 second countdown 3. A2 displayed (Rev engine to 2000rpm**) + Maintain revs during 10 second countdown 4. Battery voltages then displayed for both 3000rpm and 2000rpm tests Good or bad status displayed * 3000rpm with no battery loading. i.e. no lights AC, etc ** 2000rpm with battery loading. i.e. lights AC, etc Autogoods 7 130

7 Operation - Battery Analysing Battery Capacity Measures the cranking performance of the battery to determine engine starting ability and battery performance. 1. + 2. + CCA or EN + Set the battery standard CCA or EN*** 8 3. + CCA/EN value + Input the battery CCA or EN value *** *** markings on a battery will state the battery standard and value If CCA or EN values not stated, select CCA and use the following table 1000-1299cc 1300-1599cc 1600-1999cc 2000-2999cc 3000-3500cc CCA 300 CCA 400 CCA 500 CCA 700 CCA 800 CCA 4. Actual battery value is displayed plus capacity % Good, check or bad status displayed Good >74 %, check 50-74% and bad <50% This function will not operate if the battery voltage is less than 8v Operation - Memory Saver Memory Saver The memory saver function allows the vehicle electrical and audio settings to be retained when the battery is removed. 1. Connect the SmartCharge battery clips to positive (+) and negative (-) cables on the vehicle that attached to the battery terminals 5 Seconds 2. With the AC mains power connected press the Auto Charge button for 5 seconds. Memory Saver mode is activated when MEM is displayed on the LCD display 3. Remove the vehicle battery 4. Ensure the vehicle battery is connected correctly before disengaging the SmartCharger to ensure no loss of vehicle / audio settings Autogoods 8 130

9 Operation - Fault Codes Code Detail Reason Action F01 Battery voltage below 12v Battery is defective Replace the battery after charging for 300mins or Load maybe connected to the battery Disconnect load from the battery F01 If after 20 hours (five times in Recondition Battery is sulphated Replace the battery mode) due to a faulty battery, the beyond reconditioning battery does not enter the float stage F02 Battery voltage too high Battery rated above 12v Check the battery rating F03 Actual charging rate Charger error Disconnect the charger and the AC supply, then exceeds the charge rate set reconnect, if error happens again charger faulty or Interference from another device Turn off / disconnect other devices that may cause interference. F04 Charger temperature too high High ambient temperature Select a lower charging current to charge Allow the charger to cool for 30mins or Poor ventilation Ensure enough space for adequate ventilation (10cm clearance) F05 Does not enter float stage within 24hrs Charge current too low Disconnect battery and AC supply. Reconnect and select a higher charging rate or Load maybe connected to a battery Disconnect load from battery or Battery is defective Replace the battery F06 Reverse polarity Battery clips connected incorrectly Re-connect the battery clips correctly F07 Measured charging voltage is too Poor functioning regulator Check regulator high during the alternator test F08 Measured charging voltage is too Belt maybe loose Check belt and alternator low during the alternator test or Poor functioning alternator 10 Specifications 12v, 8A 12v, 12A Part Number RSC608/RESC608 RSC612/RESC612 Input Voltage AC 220-240VAC, 50Hz 220-240VAC, 50Hz Charging Voltage 14.4v (winter 14.6v) Standard vehicle 14.6v (winter 14.8v) START/STOP (AGM) 14.4v (winter 14.6v) Standard vehicle 14.6v (winter 14.8v) START/STOP (AGM) Charging Current Up to 8A Max Up to 12A Max Types of Battery Lead acid, Gel, Calcium, AGM, EFB 14-220Ah (Charging) Lead acid, Gel, Calcium, AGM, EFB 25-300Ah (Charging) Dimensions 195 x 138 x 78 195 x 138 x 78 Weight 1.51Kg 1.51Kg Autogoods 9 130

11 Warranty The RSC608/RESC608/RSC612/RESC612 SmartChargers come with a standard 12 months guarantee. Register your purchase either on the form attached or via the Ring website: www.ringautomotive.co.uk/uk/contact/register-your-product and you will receive an additional 4 years protection free (as long as, within 4 weeks from date of purchase, an online registration is made, or we receive the completed registration form). In the event of a warranty claim in the first instance contact our Technical Helpline: +44(0)113 213 7339 Autogoods 10 130