AFTERMARKET PRICE GUIDE 2018

AFTERMARKET PRICE GUIDE 2018 Orbit TM Trac II Reels - Flip Reel Kit Tines - Paddle Tine Gateway Sieves/Chaffers Level II Reels Level II / ML Service Parts HCC, inc. 1501 First Ave. Mendota, IL, 61342 Effective January 1, 2018 (815) 539-9371 www.hccinc.com

2018 Aftermarket Price Guide Table of Contents GENERAL................................................... 1-1 ORBIT TM TRAC II REELS....................................... 2-1 FLIP REEL KIT............................................... 3-1 TINES...................................................... 4-1 PADDLE TINE................................................ 5-1 GATEWAY SIEVES/CHAFFERS................................. 6-1 LEVEL II REELS.............................................. 7-1 LEVEL II REELS - DIAGRAM & GUIDE SERVICE PARTS............. 8-1 ML SERVICE PARTS.......................................... 9-1 CHANNEL BATS............................................ 10-1 Effective January 1, 2018

Aftermarket Price Guide HCC, inc., a major innovator in the combine industry. Ordering - Payment HCC, inc. business hours are 7:00 AM - 4:00 PM (CST), Monday through Friday Orders may be placed by the following: E-mail: ctowne@hccinc.com Fax: (815) 539-3135 Mail: 1501 1st. Ave, Mendota, IL 61342 All orders must be placed through authorized HCC Distributors Minimum Order: $50.00 Prices and Specifications Prices and specifi cations are subject to change without notice. All prices are F.O.B Mendota, IL. This price guide supersedes all other HCC, inc. Aftermarket Price Guides. Shipping - Shipping Claims Orders in most instances will be shipped United Parcel Service (UPS) unless specifi ed differently by the customer. Total size and weight of order can also cause the order to be shipped via commercial Truck. Shipping will be charged on all shipments. Please check immediately upon receipt and report any error at once. If a part of the shipment is missing or received in bad condition, you must note this fact on the carrier's receipt and make a claim with the carrier immediately. Consignee is responsible for the damaged freight if the bill of lading is signed upon delivery. Be certain to sign for the correct number of cartons. Returns Policy All merchandise being returned must have a Return Goods Authorization number (RGA#) which is obtained by contacting HCC, inc. Must provide the original PO and explanation of the return to receive the RGA#. All shipping cost are the responsibility of the Distributor unless it was determined there was a shipping error on HCC's part or a warranty issue. Returns must be in good condition, excluding warranty items. No returns will be accepted on special items ordered. The following schedule will apply to all authorized returns (excluding shipping error and/or warranty items): Days of Delivery Restocking Fee 30 days Full refund 30 days - 1 year 20% 1 yrs. - 2 yrs. 30% 2 yrs. - 3 yrs. 40% After 3 years No Returns All warranty issues must follow HCC, inc procedures before returning the product. NO Exception. Obtain procedures by contacting HCC, inc. All merchandise shipped to HCC, inc without prior authorization is subject of refusal and my be returned freight collect. 1-1 Effective January 1, 2018

HCC, inc. 1501 First Ave. Mendota, IL 61342 Phone: (815) 539-9371 Fax: (815) 539-3135 Limited Warranty HCC, inc. warrants each new HCC, inc. product to be free from defects in material and workmanship. This warranty is applicable only for the normal service life expectancy of the product or components, not to exceed 12 consecutive months from the date of delivery of the new HCC, inc. product to the original purchaser. Genuine HCC, inc. replacement parts and components will be warranted for 90 days from date of purchase, or the remainder of the original equipment warranty period, whichever is longer. There is no warranty for tines. Under no circumstances will this warranty cover any merchandise or components thereof, which, in the opinion of the company, has been subjected to misuse, unauthorized modifi cations, alteration, an accident, or if repairs have been made with parts other than those obtainable through HCC, inc. Our obligation under this warranty shall be limited to repairing or replacing, free of charge to the original purchaser, any part that, in our judgment, shall show evidence of such defect, provided further that such part shall be returned within thirty (30) days from date of failure to HCC, inc., routed through the dealer and distributor from whom the purchase was made, transportation charges prepaid. This warranty shall not be interpreted to render HCC, inc. liable for injury or damages of any kind or nature to person or property. This warranty does not extend to the loss of crops, loss because of delay in harvesting, or any expense or loss incurred for labor, substitute machinery, rental, or for any other reason. Except as set forth above, HCC, inc. shall have no obligation or liability of any kind on account of any of its equipment and shall not be liable for special or consequential damages. HCC, inc. makes no other warranty, expressed or implied, and specifically, HCC, inc. disclaims any implied warranty of merchantability or fitness for a particular purpose. Some states or provinces do not permit limitations or exclusions of implied warranties or incidental or consequential damages, so the limitations or exclusion in this warranty may not apply. This warranty is subject to any existing conditions of supply which may directly affect our ability to obtain materials or manufacture replacement parts. HCC, inc. reserves the right to make improvements in design or changes in specifi cations at any time, without incurring any obligation to owners of units previously sold. No one is authorized to alter, modify, or enlarge this warranty nor the exclusion, limitations, and reservations. Effective with products delivered to original user on or after January 1, 2006. Effective January 1, 2018 1-2

Orbit TM Trac II Reels OEM Replacement Parts Positively places crop into auger Reduces or eliminates slugging Resists wrapping in green crop On-farm installation in a few hours Harvest more crop in less time. The Orbit TM Trac II Reel closes the gap between the reel and the auger to provide more control of crop entry into the header. By creating a continuous crop fl ow, the Orbit TM Trac II Reel provides the best overall performance, especially harvesting tough crops. Construction and Operation The Orbit TM Trac II Reel is tailored to today s high-performance headers. Crop fl ow is positive. Build-up and slugging are reduced. The old-fashioned reel design has been replaced with a double-track system. The unique shape allows reel tines to swing directly past the auger. This pushes crop directly into the auger instead of dropping onto the header fl oor where it creates build-up. No more heavy build-up and no more slowing down to handle tough crops. Orbit TM Trac II Reel Standard Reel Installation is easy and can be done on equipment you already own. Designed as a retro-fi t for all HCC tubetype reels built since 1990. ML 4-1/2 tine spacings or Level II 6 tine spacings are designed to work with the Orbit Kit. You can install it yourself in just a few hours, using the C-1096 Installation Instruction Manual. 2-1 Effective January 1, 2018

HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Price List Description Part No. 2018 List Price AGCO 4 AGCO/MF 8200 Series, 25' & longer (DBL) 031373 $ 2,877.43 AGCO/MF 8200 Series, 22' & shorter, (SGL) 031396 $ 1,509.69 AGCO 400, 500, 800, 8000 Series 25' & longer (DBL) 031371 $ 2,879.15 AGCO 400, 500, 800, 8000 Series 22' & shorter (SGL) 031372 $ 1,510.50 MF Draper (DBL) 031388 $ 2,877.49 MF 1859 (SGL) 031384 $ 1,509.77 CASEIH 5 CASEIH1010-1020 - 1994 & prior - 22' & longer 1 031382 $ 2,878.72 CASEIH1010-1020 - 1994 & prior - 20' & shorter 1 031383 $ 1,510.31 CASEIH1010-1020 - 1995-1997 - 22' & longer 3 031380 $ 2,908.01 CASEIH1010-1020 - 1995-1997 - 20' & shorter 3 031381 $ 1,525.56 CASEIH1010-1020 - 1998 & Newer - 22' & longer 2 031369 $ 2,907.83 CASEIH1010-1020 - 1998 & Newer - 20' & shorter 2 031370 $ 1,510.73 CASEIH2010-2020 - 22' - 35' (DBL) 031376 $ 2,878.60 CASEIH2010-2020 - 20' & shorter (SGL) 031377 $ 1,510.20 CASEIH3020-20' & shorter (SGL) 031533 $ 1,539.55 CASEIH3020-25' - 35' (DBL) 031532 $ 2,906.92 Honey Bee Honey Bee (DBL) 031385 $ 2,905.45 John Deere JD 900 Series - 25' and longer (DBL) 031367 $ 2,906.71 JD 900 Series - 22' and shorter (SGL) 031368 $ 1,579.80 JD 600 Series - Auger - 25' and longer (DBL) 031374 $ 2,905.15 JD 600 Series - Auger - 22' and shorter (SGL) 031375 $ 1,525.70 JD 640 Flex Draper - 40' 031603 $ 2,876.70 New Holland NH 72C & 74C - 22' - 35' (DBL) 031376 $ 2,878.60 NH 72C & 74C - 20' & shorter (SGL) 031377 $ 1,510.20 NH 73C - 22' & longer (DBL) 031378 $ 2,879.09 NH 73C - 20' & shorter (SGL) 031379 $ 1,510.46 NH 971/973-25' & longer (DBL) 031400 $ 2,878.63 NH 971/973-22' & shorter (SGL) 031401 $ 1,510.24 NH CF740-20' & shorter (SGL) 031533 $ 1,539.55 NH CF740-22' & longer (DBL) 031532 $ 2,906.92 Orbit Trac II Steel Track Orbit Trac II Steel Track Update Package 031410 $ 561.67 1 For 1010 headers with S/N below JJC0200000, For 1020 headers with S/N below JJC0215000 (1994 and prior). 2 For 1010 headers with S/N JJC0300001 & CBJ023001 and up, For 1020 headers with S/N JJC0315001 & CBJ023003 and up (1998 and later). 3 For 1010 headers with S/N JJC0200001 - JJC0300000, For 1020 headers with S/N JJC0215001 - JJC0315000 (1995-1997). 4 Fits 400 Series and newer. 25 and longer fi t 35. 5 Verify single or double eccentric reel. Note: The OrbitTM Trac II Reel is designed only for Level II and ML HCC, inc. tubetype reels. They are original equipment on above headers since 1990. Effective January 1, 2018 2-2

HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Complete Reels Price List Description Part No. 2018 List Price 2018 Total List AGCO 25' & 30' Orbit Attaching Package 031392 $ 4,365.19 $ 6,573.66 25' Reel Bat Package - Level II* 030561 $ 2,208.47 30' Reel Bat Package - Level II 030581 $ 2,556.37 $ 6,921.56 25' & 30' Orbit Attaching Pkg. - 8200 Model 031397 $ 4,251.37 $ 6,459.84 25' Reel Bat Package - Level II* 030561 $ 2,208.47 30' Reel Bat Package - Level II 030581 $ 2,556.37 $ 6,807.74 35' Orbit Attaching Package - 8200 Model 031395 $ 5,275.83 $ 8,965.04 35' Reel Bat Package - Level II - 8200 Model 032082 $ 3,689.21 CASEIH 1020 25' & 30' Orbit Attaching Package 1 031387 $ 4,555.85 25' Reel Bat Package - Level II* 030561 $ 2,208.47 $ 6,764.32 30' Reel Bat Package - Level II 030581 $ 2,556.37 $ 7,112.22 CASEIH 2020 25' & 30' Orbit Attaching Package 031393 $ 4,548.84 25' Reel Bat Package - Level II* 030560 $ 2,163.61 $ 6,712.45 30' Reel Bat Package - Level II 030580 $ 2,406.87 $ 6,955.71 35' Orbit Attaching Package 031398 $ 5,341.62 35' Reel Bat Package - Level II 032023 $ 3,695.83 $ 9,037.45 CASEIH 3020 / CNH CF740 25' & 30' Orbit Attaching Package 031534 $ 4,753.49 25' Reel Bat Package - Level II* 030562 $ 2,053.51 $ 6,807.00 30' Reel Bat Package - Level II 030582 $ 2,574.03 $ 7,327.52 35' Orbit Attaching Package 031535 $ 5,745.93 35' Reel Bat Package - Level II 032023 $ 3,695.83 $ 9,441.76 John Deere 600 25' & 30' Orbit Attaching Package 031389 $ 4,382.37 25' Reel Bat Package - Level II* 030562 $ 2,053.51 $ 6,435.88 30' Reel Bat Package - Level II 030582 $ 2,574.03 $ 6,956.40 35' Orbit Attaching Package 031402 $ 5,455.43 35' Reel Bat Package - Level II 032023 $ 3,695.83 $ 9,151.26 John Deere 900 25' & 30' Orbit Attaching Package 031390 $ 4,475.22 25' Reel Bat Package - Level II* 030562 $ 2,053.51 $ 6,528.73 30' Reel Bat Package - Level II 030580 $ 2,406.87 $ 6,882.09 1 For headers with S/N JJC0315001 & CBJ023003 and later. * Using 25' - Will be extra parts - Reel Arms, Anchor Plates. 2-3 Effective January 1, 2018

HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Service Parts - Brackets Price List 2018 Part No. Description Orbit Reel Kit Item No. List Price AGCO 783994 AGCO - Bracket LH 031371, 031372, 031392 29 $ 147.75 783995 AGCO - Bracket RH 031371, 031392 28 $ 147.75 784037 AGCO - Bracket LH 031388 29 $ 169.91 784038 AGCO - Bracket RH 031388 28 $ 169.91 784205 AGCO - Bracket LH 031373, 031395, 031396, 031397 29 $ 118.13 784206 AGCO - Bracket RH 031373, 031395, 031397 28 $ 118.13 784027 MF 1859 - Bracket LH 031384 29 $ 154.47 CASEIH 783990 CASEIH - Bracket LH 031369, 031370, 031387 29 $ 151.91 783989 CASEIH - Bracket RH 031369, 031387 28 $ 252.91 784015 CASEIH - Bracket LH 031380, 031381 29 $ 224.45 784016 CASEIH - Bracket RH 031380 28 $ 372.23 784024 CASEIH - Bracket LH 031382, 031383 29 $ 140.19 784025 CASEIH - Bracket RH 031382 28 $ 140.04 784365 CASEIH - Bracket LH 031532, 031533, 031534, 031535 29 $ 251.97 784366 CASEIH - Bracket RH 031532, 031534, 031535 28 $ 329.18 CASEIH/New Holland 784022 CASEIH/NH Bracket LH 031376, 031377, 031393, 031398, 031400, 031401 29 $ 136.34 784023 CASEIH/NH Bracket RH 031376, 031393, 031398, 31400 28 $ 136.34 Honey Bee 784028 HB - Bracket LH 031385 29 $ 77.50 784029 HB - Bracket RH 031385 28 $ 77.50 John Deere 783980 JD900 Bracket LH 031367, 031390 29 $ 134.59 783981 JD900 Bracket RH 031367, 031368, 031390 28 $ 134.59 784009 JD600 Bracket LH 031374, 031375, 031389, 031402 29 $ 233.11 784010 JD600 Bracket RH 031374, 031389, 031402 28 $ 382.03 New Holland 784017 NH Bracket LH 031378, 031379 29 $ 160.36 784018 NH Bracket RH 031378 28 $ 160.36 Note: See installation/assembly procedure and parts book (C-1096-04). Effective January 1, 2018 2-4

HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Service Parts - Price List 2018 Part No. Description Item No. List Price 784064 Main Support Section - Orbit Before Jan 1, 2010 - All Plastic A $ 178.77 784281 Main Support Section - Orbit Trac II After Jan 1, 2010 - lower steel track - upper plastic A $ 169.90 483310 Front Support Section All Orbit Kit Part number on Pg 2-2 B $ 35.79 483311 Rear Support Section * All Orbit Kit Part number on Pg 2-2 C $ 38.16 483312 Connecting Plate* All Orbit Kit Part number on Pg 2-2 D $ 10.61 784056 Support Hub Assy - RH 031367, 031368, 031371, 031376, 031378, 031385, 031400 E $ 88.93 784057 Support Hub Assy - LH 031367, 031369-72, 031378-79, 031380-85, 031400-01, 031532-33 E $ 88.93 784058 Support Hub Assy - RH 031369, 031376, 031380, 031382, 031532 E $ 98.00 784059 Support Hub Assy - RH 031374 E $ 108.91 784060 Support Hub Assy - LH 031374, 031375 E $ 100.56 784061 Support Hub Assy - LH 031376, 031377 E $ 98.00 784062 Support Hub Assy - LH 031388 E $ 102.11 784063 Support Hub Assy - RH 031388 E $ 102.11 784455 Support Hub Assy - LH (JD 40' Draper only) 031602, 031603 E $ 181.27 784456 Support Hub Assy - LH (JD 25'-35' Draper only) 031602 E $ 191.00 784457 Support Hub Assy - RH (JD 40' Draper only) 031603 E $ 181.27 784143 Support Hub Assy - RH 031373 E $ 186.10 784144 Support Hub Assy - LH 031373 E $ 186.10 483238 Inner Section (Composite Roller Track) * All Orbit Kit Part number on Pg 2-2 3 $ 134.65 483239 Outer Section (Composite Roller Track) * All Orbit Kit Part number on Pg 2-2 4 $ 147.69 483261 RH Inner Action Section - Orbit Before Jan 1, 2010 - All Plastic 5 $ 140.77 483241 RH Outer Action Section - Orbit Before Jan 1, 2010 - All Plastic 6 $ 160.24 483470 RH Inner Action Section - Orbit TracII 031367-69, 031374, 031376, 031378, 031380, 031382, 031385, 034100, 031532, 031602-03 5 $ 189.93 483471 RH Outer Action Section - Orbit TracII 031367-69, 031374, 031376, 031378, 031380, 031382, 031385, 034100, 031532, 031602-03 6 $ 195.70 483273 LH Inner Action Section - Orbit Before Jan 1, 2010 - All Plastic Main Support 7 $ 152.00 483274 LH Outer Action Section - Orbit Before Jan 1, 2010 - All Plastic Man Support 8 $ 152.00 483468 LH Inner Action Section - Orbit TracII 031367, 031369-70, 031374-83, 031385, 031400-01, 031532-33, 031602-03 7 $ 189.93 483469 LH Outer Action Section - Orbit TracII 031367, 031369-70, 031374-83, 031385, 031400-01, 031532-33, 031602-03 8 $ 195.70 206071 Screw - Flathead Socket Cap M10X45) * 9 $ 1.49 483275 Spacer (19.5 x 12.7 x 18.3) * 10 $ 3.62 212412 Nut - Prev. Torq. Hex Lock (M10)* 11 $ 0.60 243719 Bearing - Roller Ball (ML,LII,Orbit)* Required Box Quantity 75 12 $ 25.24 481497 Spacer - Tubing (.75"X2.06") * 14 $ 5.92 243686 Roller - Reel Support * 15 $ 6.14 * Can be used for both Orbit Track and Orbit Trac II Note: See installation/assembly procedure and parts book (C-1096-04). 2-5 Effective January 1, 2018

HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Orbit Trac II Reel - Service Parts - Price List 2018 Part No. Description Item No. List Price 202190 Bolt - Hex Head (3/8-16X1.0") JD 900 Series only 17 $ 0.46 483301 Bracket - Stop Top Reverse * 22 $ 11.66 483302 Bracket - Stop Bottom Reverse * 23 $ 13.80 202814 Bolt - Hex Head (M10X70) * 24 $ 1.17 214244 Washer - Belleville (12mm) * 25 $ 5.99 201145 Bolt - Carriage (M12X1.75X40) 30 $ 7.16 202807 Bolt - Hex Head (M10X25) * 31 $ 0.91 212404 Nut - Hex (M12X1.75) 32 $ 1.19 * Can be used for both Orbit Track and Orbit Trac II Note: See installation/assembly procedure and parts book (C-1096-04). Effective January 1, 2018 2-6

Flip Reel Kit OEM Replacement Parts Eliminates crop wrapping around bat tubes Designed to fit HCC tube type reels built since 1990 To improve performance in some crop conditions, end shield may be desired. Construction and Operation The Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in canola and other tall, stringy crops. Installation is easy and can be done on equipment you already own. Designed as a retro-fi t for all HCC tube-type reels built since 1990. ML 4-1/2" tine spacing or Level II 6" tine spacings are designed to work with the Orbit Kit. You can install it yourself in just a few hours using the Installation Instruction Manual. Flip Reel Standard Reel 3-1 Effective January 1, 2018

HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Flip Reel Kit - Price List 2018 Part No. Description List Price AGCO 031510 AGCO 8200, 9250 - Auger (35'- 40') (DBL ECC)* $2,168.57 031521 AGCO 8200, 9250 - Auger 22' & shorter (SGL ECC) $1,169.97 031515 AGCO 400, 500, 800, 8000 Series, 25' & longer (DBL) $1,994.85 031520 AGCO 400, 500, 800, 8000 Series, 22' & shorter (SGL) $1,083.69 031511 AGCO 5000(36'), 8000 Series - Draper (DBL ECC) $2,049.22 031522 AGCO 8000 Series - Draper (SGL ECC) $1,110.88 CNH 031516 CNH 1010,1020,3020-25' & longer (DBL ECC) $2,016.12 031520 CNH 1010,1020,3020-22' & shorter (SGL ECC) $1,083.69 031517 CNH 2010,2020-25' & longer (DBL ECC) $2,016.12 031523 CNH 2010,2020-22' & shorter (SGL ECC) $1,103.78 Honey Bee 031357 HB - Clamp Mounting - 25' & longer (DBL ECC) $2,198.12 031513 HB - Bracket Mounting - 25' & longer (DBL ECC) $2,219.39 John Deere 031519 JD900 Series - Auger - 25' & longer (DBL ECC) $2,592.83 031525 JD900 Series - STD Reel - 22' & shorter (SGL ECC) $1,596.50 031518 JD600 Auger only - JD 900 Draper only - 25' & longer $2,109.48 031524 JD600 Series - STD Reel - 22' & shorter (SGL ECC) $1,136.87 031365 JD625, JD630, JD635 - Draper (DBL ECC) $2,152.78 031351 JD640D, JD 645FD - Draper (Split) $2,144.23 New Holland 031517 NH 72C,74C - 25' & longer (DBL) $2,016.12 031523 NH 72C,74C - 22' & shorter (SGL) $1,103.78 031515 NH 971,973,73C - 25' & longer (DBL) $1,994.85 031520 NH 971, 973, 73C, 740CF - 22' & shorter (SGL) $1,083.69 031516 NH 740CF - 25' & longer (DBL) $2,016.12 * Clamp mount only Effective January 1, 2018 3-2

HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Flip Reel Service Parts 2018 Part No. Description Flip Kits Item No. List Price 480750 Ring - Ecc. Control (Flip-ML6) 1 $ 114.63 483478 Ring - Ecc. Center Arm Att. (Replaced 483411) 2 $ 134.76 784249 Arm - Fixed Assy w/ Male-Female Ecc. Bearings 3 $ 90.93 784250 Arm - Pivot Assy w/ Male-Female Ecc. Bearings 4 $ 100.37 784251 Arm - Flip Reel Ecc. 5 $ 78.06 243720 Bearing - Male Threaded Ecc. (Plastic) 6 $ 3.00 243721 Bearing - Female Threaded Ecc. (Plastic) 7 $ 2.32 204800 Screw - Socket Head Shoulder (M12X1.75X50) 8 $ 9.86 483440 Spacer (19.05X12.70X26.00) 9 $ 5.51 784185 Frame Assy - Ecc. Roller (Flip) 031513, 031515-17, 031519-20, 031525 10 $ 171.25 784244 Frame Assy - Ecc. Roller (Flip) 031510, 031521 10 $ 281.94 784289 Frame Assy - Ecc. Roller (Flip) 031511, 031522 10 $ 189.14 784299 Frame Assy - Ecc. Roller (Flip) 031357 10 $ 137.23 784307 Frame Assy - Ecc. Roller (Flip) 031516-17, 031523 10 $ 183.54 784310 Frame Assy - RH Ecc. Roller (Flip) 031518 10 $ 244.29 784312 Frame Assy - LH Ecc. Roller (Flip) 031518, 031524 10 $ 232.10 784386 Frame Assy - LH Ecc. Roller (Flip) 031365, 031351 10 $ 184.40 784387 Frame Assy - Ecc. Roller RH (Flip) 031351 10 $ 186.73 784388 Frame Assy - RH Ecc. Roller (Flip) 031365 10 $ 198.48 483555 Spacer - Fixed Arm (Flip) 11 $ 12.41 Note: See instruction/assembly procedure and parts book section (C-1158 Sept. 2013) Page 7 End Shield - Will Fit All Flip Reels 2018 Part No. Description List Price 031591 End Shield - Double $ 760.54 031600 End Shield - Single $ 433.82 483473 Shield Section - Flip Reel End $ 27.36 483474 Arm Shield Att. $ 19.56 Note: Instruction C-1179 & C-1180 3-3 Effective January 1, 2018

NOTES Effective January 1, 2018 3-4

Tines OEM Replacement Parts Construction 4-1 Effective January 1, 2018

Tines OEM Replacement Parts Tines Price List 1 2 3 4 5 6 2018 Part No. Reel Type Description Qty List Price 224081 LII - 6" Plastic Finger Tines - Heavy Duty* 2 150 Box $ 4.01 208100 LII - 6" Screw for Heavy Duty Tines* 500 Box $ 0.12 224047 LII - 6" Plastic Fgr. Repair - Full Bat - Pipe Type* 130 Box $ 2.74 224048 LII - 6" Plastic Fgr. Repair - LH Bat - Pipe Type* 150 Box $ 2.96 224049 LII - 6" Plastic Fgr. Repair - RH Bat - Pipe Type* 150 Box $ 2.96 224050 LII - 6" Plastic Fgr. Repair - No Bat - Pipe Type* 150 Box $ 2.96 208065 LII - 6" Screw for plastic tines 1 (3.5 x 1.3 x 16mm)* 500 Box $ 0.12 224016 ML - 4.5" Plastic Fgr. Repair - Full Bat - Pipe Type* 180 Box $ 2.20 224017 ML - 4.5" Plastic Fgr. Repair - RH Bat - Pipe Type* 250 Box $ 2.64 224018 ML - 4.5" Plastic Fgr. Repair - LH Bat - Pipe Type* 250 Box $ 2.64 224019 ML - 4.5" Plastic Fgr. Repair - No Bat - Pipe Type* 250 Box $ 3.46 208065 ML - 4.5" Screw for plastic tines 1 (3.5 x 1.3 x 16mm)* 500 Box $ 0.12 782018 Polytine Plastic Fgr. Repair - 10 pk of 224014 w/ screws* 10 Pkg. $ 29.82 782123 Polytine Plastic Fgr. Repair - 500 pk of 224014 w/ screws* 500 Box $ 840.56 208060 Polytine Screw for plastic tines 1 (8.32 x.75) $ 0.28 782094 LOVE Plastic Fgr. Repair - 10 pk of 224015 w/ screws* 10 Pkg. $ 38.76 782124 LOVE Plastic Fgr. Repair - 275 pk of 224015 w/ screws* 275 Box $ 707.26 208064 LOVE Screw for plastic tines 1 (6 x.62) $ 0.17 480056 Wood Bat Steel Tine Bat $ 2.52 480057 Wood Bat Steel Tine Clip $ 0.29 * Order as each - must meet box quantity 1 Screws no longer offered with tines - order separately. 2 Fits any HCC 1-3/8" diameter tube with hex hub attachment. Effective January 1, 2018 4-2

Tines Service Parts OEM Replacement Parts Miscellaneous Tine Price List Plastic Fingers 2018 Part No. Description List Price 007650 KIT-Plastic Aux. Pickup Tines (12 count of 224013 w/ hardware) $ 266.53 007651 KIT-Screws #10 for Polytines (50 Screws) $ 25.69 783128 KIT-Finger (6 EA - 224016, 224017, 224018 with screws) $ 56.67 224013 Finger - Plastic Aux. $ 6.54 224014 Finger - Polytine for Tear Drop Bats (Replaces 224012) $ 2.05 224015 Finger - Plastic Repair (JI) $ 3.85 277481 Finger - Plastic Aux. Retainer $ 4.25 277484 Finger - Plastic Aux. Bracket $ 11.82 Steel Fingers 2018 Part No. Description List Price 007559 KIT-Pkg. Aux. Steel Pickup (6 RH-780120 & 6 LH-780110) $ 439.17 007634 KIT-Pkg. Hdw Bushing Conversion Kit (Removing ML5 & ML6 Bat Fingers) $ 113.84 224051 Tine - Steel, Double Coil (Over Center Mount) $ 15.57 224052 Tine - Steel, Single Coil (Over Center Mount) $ 10.18 224054 Tine - Steel - LH (8", LVL II) (Replaced 224025) $ 3.85 224055 Tine - Steel - RH (8", LVL II) (Replaced 224026) $ 3.85 224065 Tine - Steel - LH (9", LVL II ) (2004 and later) $ 4.48 224066 Tine - Steel - RH (9", LVL II) (2004 and later) $ 5.07 481087 Tine - Steel Aux. RH Pickup Finger $ 8.51 481088 Tine - Steel Aux. LH Pickup Finger $ 7.90 780026 Tine - Steel Aux. RH Pickup Finger Assy. $ 30.52 780027 Tine - Steel Aux. LH Pickup Finger Assy. $ 30.65 780110 Tine - Steel Aux. LH Pickup Finger Assy. $ 28.21 780120 Tine - Steel Aux. RH Pickup Finger Assy. $ 29.36 781344 Tine - Steel Aux. RH Assy. SP $ 41.36 781345 Tine - Steel Aux. LH Assy. SP $ 41.36 4-3 Effective January 1, 2018

NOTES Effective January 1, 2018 4-4

Paddle Tine Tine Replacement System OEM Replacement Parts The Paddle is a cost-effective alternative to the standard pickup reel tine when crop conditions make harvesting difficult and inefficient. Construction and Operation The Paddle s 6 width lifts and feeds crop that standard tines miss. With full crop contact, feeding into the header is positive and even. Increase your harvest in light, sparse, or special crop conditions. The Paddle is designed to provide a complete sweep of the header with each reel rotation. By limiting the number of Paddles used, you save installation time and money. Increased harvest Improved feeding Cleaner cutterbar Faster harvesting Installation Installation is fast and easy with HCC s patented tine mounting system. Remove one screw and replace the standard tine with a Paddle tine. In less than one hour, you can easily replace enough standard tines with Paddle tines to dramatically improve your harvest. Original tines can be used for spares or reinstalled, as needed. 5-1 Effective January 1, 2018

HCC, inc., the original reel people and a leading manufacturer of combine components in North America. Specifications Recommended Number of Paddles (sweeps header completely with each rotation of the reel) Original Tine Spacing Reel Width 18' 20' 25' 30' 36' Number of Paddles 4.5" 40 40 50 60 N/A 6.0" 30 40 40 50 60 Note: Individual preferences or conditions may call for increasing the number of Paddles or altering the installation pattern. Note: 4.5 spacing includes wood bat, polytine, and ML reels. 6.0 spacing is for the LII reel. Parts and Price List Paddles are not sold individually. Part numbers and prices are for a box of 10 paddles, and includes screws and complete installation instructions. Description Part No. 2018 List Price For Polytine (Teardrop Bat) 1 783950 $ 63.25 For ML reel - 4.5" tine spacing 2 783845 $ 60.78 For LII reel - 6.0" tine spacing 3 783846 $ 62.60 For Wood Bat Reels 783949 $ 65.55 1 Polytine reels supplied from 1984-1989. 2 ML reels supplied 1989-1999. 3 LII reels are standard since 1999/2000. Effective January 1, 2018 5-2

Gateway Sieves Durable Plastic Sieves and Chaffers OEM Replacement Parts Lightweight Rustproof Less chaff build-up Improved grain cleaning Infinitely adjustable slats The top unit, the chaffer, separates the larger material from the grain. The grain and small particles fall onto the bottom unit, the sieve. Air blowing through the units separates the lighter chaff from the grain, blowing the chaff out the back of the combine. Easy to repair GATEWAY Shipping Cartons Large Box 83-1/2 x 63-1/2 x 10 36.5 lbs. Small Box 68-1/2 x 48-1/4 x 10 27-1/4 lbs. Construction and Operation The Gateway Sieves aluminum / plastic construction is up to 50% lighter than most OEM steel frame construction, making it easier to change sieves and chaffers for various crops. This is especially important when harvesting a variety of grains in all types of crop and weather conditions. Our smooth, plastic slats offer less resistance than conventional steel teeth, which helps prevent build-up. They perform well when cleaning both lighter crops (small grain) and heavy crops (high-yield corn). Easy-to-use adjuster(s) on each frame allow you to quickly and accurately change the louver angle. Depending on the combine model, more than one adjuster may be used. Due to the thickness of the plastic louvers (thicker than steel), the louver spacing has been increased; however, the openings between the rows (row-to-row spacing) remain the same. Sieves and chaffers are available in two row-to-row spacing widths, depending on the crop being harvested. Wide spaced units, 45 mm (compares to 1-5/8 ), are used for crops such as high-capacity corn and soybeans. The wider spacing allows more grain to fl ow through the frame, but prevents stems or cobs from falling through. The narrow spaced units, 33 mm (compares to 1-1/8 ), are used for smaller cereal grains, and provide more thorough cleaning of the grain. 6-1 Effective January 1, 2018

HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Tooth Design and Modular Construction Currently, two tooth lengths are offered. A 3/8 short tooth (ST) and a 7/8 long tooth (LT). The standard chaffer is offered with the long tooth and can also be used in place of a deep tooth (1-1/4 ) slat. Modular construction allows for easy and cost-effective repair. All components on Gateway Sieves are replaceable for fast, economical repair. Slat connectors allow consistent and precise slat adjustment for infi nite angles and optimal cleaning performance. Optional Divider Riser Kit (002641) Gateway Sieves are equipped with aluminum dividers to channel grain into the individual panels, promoting an even fl ow through the cleaning process. For side hill conditions, the 002641 Divider Riser kit is available to mount your existing risers and prevent grain from fl owing over the top of the dividers. Each kit comes with 12 clips and 24 rivets. (Divider risers not included.) Effective January 1, 2018 6-2

HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Gateway Application Guide Chaff - Top Unit LT - Long Tooth 7/8" Wide Spacing (45mm; similar to 1-5/8") - (similar to 7/8" and 1-1/4" steel) faster operation through high capacity corn. Sieve - Bottom Unit LT - Long Tooth 7/8" Wide Spacing (45mm; similar to 1-5/8") - (similar to 7/8" steel) faster operation through high capacity corn. Sieve - Bottom Unit ST - Short Tooth 3/8" Narrow Spacing (33mm; similar to 1-1/8") - (similar to 3/8" steel) both small (wheat, alfalfa, cereal grains) and large (corn, soybeans) crops. RH-Right Hand (viewed from driver's seat) LH-Left Hand (viewed from driver's seat) Row-to-Row - Distance between slat rows *HCC suggest replacing the OEM steel frame with the spacing and slat described above which most closely matches the original equipment. The chart below may also be used as a reference, however if the current steel frame is successful - match as indicated above. Chaffer Sieve Corn 45LT 33LT¹ or 45LT³ Soybean 33LT 33ST¹ or 33LT Wheat 33ST¹ or 33LT³ 33ST¹ or 33LT Corn & Soybean 33LT² or 45LT 33LT¹ or 45LT³ Corn & Wheat 33LT² or 45LT 33ST¹ ² or 33LT Corn, Soybean, Wheat 33LT² or 45LT 33ST¹ ² or 33LT Soybean & Wheat 33LT 33ST Other Small Grains 33ST 33ST 1 Lower yields / trashy conditions. 2 Greater percentage of wheat and or soybeans. 3 High yields - greater than 180 bushels corn per acre (large capacity machines). 6-3 Effective January 1, 2018

Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual AGCO-Massey - 9540, 9560 - Electric Adjust Top Chaffer 9560 45LT - 4P 71465011 61.16 x 78.75 90 4/6 1/1 45 mm (1-5/8") long 002757 $1,885.08 C-1104 Top Chaffer 9560 33LT - 4P 2 71465009 61.16 x 78.75 96 4/6 1/1 33 mm (1-1/8") long 002758 $2,084.78 C-1104 Bottom Sieve 9560 33ST - 4P 6 71465010 61.30 x 65.88 90 4/6 1/1 33 mm (1-1/8") short 002756 $1,502.17 C-1104 Bottom Sieve 9560 33LT - 4P 6 71465013 61.30 x 65.88 90 4/6 1/1 33 mm (1 1/8") long 002759 $1,636.78 C-1104 d Bottom Sieve 9560 45LT - 4P 6 N/A 61.30 x 65.88 86 4/6 1/1 45 mm (1-5/8") long 002771 $1,469.66 C-1104 d AGCO-Massey - 9520 - Electric Adjust Top Chaffer 9520 45LT - 3P 71465006 49.86 x 78.75 72 3/5 1/1 45 mm (1-5/8") long 002742 $1,671.84 C-1102 Top Chaffer 9520 33LT - 3P 2 71465004 49.86 x 78.75 78 3/5 1/1 33 mm (1-1/8") long 002743 $1,920.35 C-1102 Bottom Sieve 9520 33ST - 3P 6 71465005 50.00 x 65.88 74 3/5 1/1 33 mm (1-1/8") short 002741 $1,565.87 C-1102 d Bottom Sieve 9520 33LT - 3P 6 71465008 50.00 x 65.88 74 3/5 1/1 33 mm (1-1/8") long 002744 $1,737.35 C-1102 d Bottom Sieve 9520 45LT - 3P 6 N/A 50.00 x 65.88 70 3/5 1/1 45 mm (1-5/8") long 002772 $1,524.49 C-1102 d AGCO-Massey - 9795, 9895; Challenger - 670B, 680B ; Gleaner A76, A85, A86; - Electric Adjust Top Chaffer 9895 45LT - 4P 71445403 61.16 x 78.75 90 4/6 1/1 45 mm (1-5/8") long 002752 $1,764.61 C-1104 Top Chaffer 9895 33LT - 4P 2 71445401 61.16 x 78.75 96 4/6 1/1 33 mm (1-1/8") long 002753 $2,095.21 C-1104 Bottom Sieve 9895 33ST - 4P 6 71445402 61.30 x 65.88 90 4/6 1/1 33 mm (1-1/8") short 002751 $1,512.60 C-1104 d Bottom Sieve 9895 33LT - 4P 6 71445405 61.30 x 65.88 90 4/6 1/1 33 mm (1 1/8") long 002754 $1,647.22 C-1104 d Bottom Sieve 9895 45LT - 4P 6 N/A 61.30 x 65.88 86 4/6 1/1 45 mm (1-5/8") long 002767 $1,480.31 C-1104 d AGCO-Massey - 9790, 9795, 9895; Challenger - 670, 680; Gleaner - A75 - Manual Adjust Top Chaffer 9790 45LT - 4P 71392680 61.16 x 78.75 90 4/6 1/1 45 mm (1-5/8") long 002582 $1,692.28 C-1104 Top Chaffer 9790 33ST - 4P 71387678 61.16 x 78.75 96 4/6 1/1 33 mm (1-1/8") short 002580 $2,001.97 C-1104 Top Chaffer 9790 33LT - 4P 71387678 61.16 x 78.75 96 4/6 1/1 33 mm (1-1/8") long 002583 $2,001.97 C-1104 Bottom Sieve 9790 33ST - 4P 6 71387676 61.30 x 65.88 90 4/6 1/1 33 mm (1-1/8") short 002581 $1,486.51 C-1104 d Bottom Sieve 9790 33LT - 4P 6 71387677 61.30 x 65.88 90 4/6 1/1 33 mm (1 1/8") long 002584 $1,626.00 C-1104 d Bottom Sieve 9790 45LT - 4P 6 N/A 61.30 x 65.88 86 4/6 1/1 45 mm (1-5/8") long 002766 $1,458.63 C-1104 d AGCO-Massey - 9695; Gleaner - A65, A66; Challenger - 660B - Electric Adjust Top Chaffer 9690 45LT - 3P 71445357 49.86 x 78.75 72 3/5 1/1 45 mm (1-5/8") long 002747 $1,711.55 C-1102 Top Chaffer 9690 33LT - 3P 2 71445355 49.86 x 78.75 78 3/5 1/1 33 mm (1-1/8") long 002748 $2,017.66 C-1102 Bottom Sieve 9690 33ST - 3P 6 71445356 50.00 x 65.88 74 3/5 1/1 33 mm (1-1/8") short 002746 $1,577.38 C-1102 d Bottom Sieve 9690 33LT - 3P 6 71445359 50.00 x 65.88 74 3/5 1/1 33 mm (1-1/8") long 002749 $1,747.79 C-1102 d Bottom Sieve 9690 45LT - 3P 6 N/A 50.00 x 65.88 70 3/5 1/1 45 mm (1-5/8") long 002769 $1,535.14 C-1102 d HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Effective January 1, 2018 6-4

Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual AGCO-Massey - 8780, 9690, 9695; Challenger - 660; Gleaner - A65, A66 - Manual Adjust Top Chaffer 9690 45LT - 3P 71397999 49.86 x 78.75 72 3/5 1/1 45 mm (1-5/8") long 002577 $1,605.76 C-1102 Top Chaffer 9690 33ST - 3P 71392698 49.86 x 78.75 78 3/5 1/1 33 mm (1-1/8") short 002575 $1,841.89 C-1102 Top Chaffer 9690 33LT - 3P 71392698 49.86 x 78.75 78 3/5 1/1 33 mm (1-1/8") long 002578 $1,841.89 C-1102 Bottom Sieve 9690 33ST - 3P 6 71392696 50.00 x 65.88 74 3/5 1/1 33 mm (1-1/8") short 002576 $1,487.64 C-1102 d Bottom Sieve 9690 33LT - 3P 6 71392697 50.00 x 65.88 74 3/5 1/1 33 mm (1-1/8") long 002579 $1,688.19 C-1102 d Bottom Sieve 9690 45LT - 3P 6 N/A 50.00 x 65.88 70 3/5 1/1 45 mm (1-5/8") long 002768 $1,513.66 C-1102 d AGCO-Gleaner - R66, R76, S67, S77 - Electric Adjust Top Chaffer S67 45LT - 4P 71452197 62.44 x 63.97 75 4/5 1/1 45 mm (1-5/8") long 002692 $1,585.72 C-1104 Top Chaffer S67 33LT - 4P 2 71452195 62.44 x 63.97 80 4/5 1/1 33 mm (1-1/8") long 002693 $1,806.97 C-1104 Bottom Sieve S67 33ST - 4P 6 71452196 60.94 x 57.22 75 4/5 1/1 33 mm (1-1/8") short 002691 $1,470.92 C-1104 Bottom Sieve S67 33LT - 4P 6 N/A 60.94 x 57.22 75 4/5 1/1 33 mm (1-1/8") long 002689 $1,688.20 C-1104 Bottom Sieve S67 45LT - 4P 6 N/A 60.94 x 57.22 72 4/5 1/1 45 mm (1-5/8") long 002773 $1,542.49 C-1104 AGCO-Gleaner - R62 S/N 66001 and up, R72 S/N 76001 and up, R65, R66, R75, R76 - Manual Adjust Top Chaffer R75 45LT - 4P 71399277 62.44 x 63.97 75 4/6 1/1 45 mm (1-5/8") long 002572 $1,523.12 C-1104 Top Chaffer R75 33ST - 4P 71376856 62.44 x 63.97 80 4/6 1/1 33 mm (1-1/8") short 002570 $1,719.77 C-1104 Top Chaffer R75 33LT - 4P 71376856 62.44 x 63.97 80 4/6 1/1 33 mm (1-1/8") long 002573 $1,719.77 C-1104 Bottom Sieve R75 33ST - 4P 71369796 60.94 x 57.22 75 4/6 1/1 33 mm (1-1/8") short 002571 $1,399.43 C-1104 Bottom Sieve R75 33LT - 4P N/A 60.94 x 57.22 75 4/6 1/1 33 mm (1-1/8") long 002574 $1,628.91 C-1104 Bottom Sieve R75 45LT - 4P N/A 60.94 x 57.22 71 4/6 1/1 45 mm (1-5/8") long 002770 $1,519.85 C-1104 AGCO-Gleaner - R42 S/N 46001 and up, R52 S/N 56001 and up, R55 Top Chaffer R55 45LT - 3P 71399276 41.67 x 63.97 51 3/4 1/1 45 mm (1-5/8") long 002567 $1,104.76 C-1102 Top Chaffer R55 33ST - 3P 71376859 41.67 x 63.97 55 3/4 1/1 33 mm (1-1/8") short 002565 $1,200.22 C-1102 Top Chaffer R55 33LT - 3P 71376859 41.67 x 63.97 55 3/4 1/1 33 mm (1-1/8") long 002568 $1,200.22 C-1102 Bottom Sieve R55 33ST - 3P 71373464 40.17 x 57.22 51 3/4 1/1 33 mm (1-1/8") short 002566 $1,223.68 C-1102 Bottom Sieve R55 33LT - 3P N/A 40.17 x 57.22 51 3/4 1/1 33 mm (1-1/8") long 002569 $1,223.68 C-1102 CASEIH - 5088, 6088, 7088, 5130, 6130, 7130 - Electric Adjust (In Cab) Top Chaffer - 45LT - 4P 87710706¹ 60.00 x 75.24 98 4/6 3/3 45 mm (1-5/8") long 002702 $1,635.87 C-1108 g Top Chaffer - 33LT - 4P 87710708¹ 60.00 x 75.24 103 4/6 3/3 33 mm (1-1/8") long 002703 $1,757.08 C-1108 g Bottom Sieve - 33ST - 4P 87712275¹ 60.20 x 64.96 74 4/6 1/1 33 mm (1-1/8") short 002701 $1,438.77 C-1134 g Bottom Sieve - 33LT - 4P 87712276¹ 60.20 x 64.96 74 4/6 1/1 33 mm (1-1/8") long 002704 $1,537.24 C-1134 g Bottom Sieve - 45LT - 4P N/A 60.20 x 64.96 66 4/6 1/1 45 mm (1-5/8") long 002705 $1,627.88 C-1134 g HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. 6-5 Effective January 1, 2018

Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual CASEIH - 1680 S/N JJC 0047412 and up, 1688, 2188, 2377, 2388, 2577, 2588 - Manual Remote & Electric Adjust; See Note #2 Page 6-10 Top Chaffer - 2388-45LT - 4P 87710706 1 60.00 x 75.24 83 4/6 3/3 45 mm (1-5/8") long 002602 $1,556.39 C-1108 ce Top Chaffer - 2388-33ST - 4P 87710708 1 60.00 x 75.24 88 4/6 3/3 33 mm (1-1/8") short 002600 $1,784.97 C-1108 ce Top Chaffer - 2388-33LT - 4P 87710708 1 60.00 x 75.24 88 4/6 3/3 33 mm (1-1/8") long 002603 $1,784.97 C-1108 ce Bottom Sieve - 2388-33ST - 4P 87712275 1 60.20 x 64.96 69 4/6 1/1 33 mm (1-1/8") short 002601 $1,418.82 C-1134 ce Bottom Sieve - 2388-33LT - 4P 87712276 1 60.20 x 64.96 69 4/6 1/1 33 mm (1-1/8") long 002604 $1,525.81 C-1134 ce Bottom Sieve - 45LT - 4P N/A 60.20 x 64.96 66 4/6 1/1 45 mm (1-5/8") long 002705 $1,627.88 C-1134 g CASEIH - 1644, 1666, 2144, 2166, 2344, 2366, 1660 S/N JJC0039550 and up; See Note #2 Page 6-10 Top Chaffer - 2366-45LT - 3P 3,5 1957314C 1 45.00 x 75.37 53 3/4 2/3 45 mm (1-5/8") long 002612 $1,219.83 C-1135 c Top Chaffer - 2366-33ST - 3P 3,5 1957316C 1 45.00 x 75.37 57 3/4 2/3 33 mm (1-1/8") short 002610 $1,352.34 C-1135 c Top Chaffer - 2366-33LT - 3P 3,5 1957316C 1 45.00 x 75.37 57 3/4 2/3 33 mm (1-1/8") long 002613 $1,352.34 C-1135 c Bottom Sieve - 2366-33ST - 3P 1325323C 1 45.20 x 64.96 52 3/4 1/1 33 mm (1-1/8") short 002611 $1,206.97 C-1135 c Bottom Sieve - 2366-33LT - 3P 1994961C 1 45.20 x 64.96 52 3/4 1/1 33 mm (1-1/8") long 002614 $1,245.13 C-1135 c CASEIH - 1644, 1666, 2144, 2166, 2344, 2366, 1660 S/N JJC0039550 and up - Side Hill Option; See Note #2 Page 6-10 Top Chaffer - 2366-33ST - 4P 4 1957316C 1 45.00 x 75.37 71 4/4 2/3 33 mm (1-1/8") short 002694 $1,383.63 C-1133 c Top Chaffer - 2366-45LT - 4P 4 1957314C 1 45.00 x 75.37 65 4/4 2/3 45 mm (1-5/8") long 002695 $1,348.25 C-1133 c Top Chaffer - 2366-33LT - 4P 2,4 1957316C 1 45.00 x 75.37 71 4/4 2/3 33 mm (1-1/8") long 002696 $1,475.61 C-1133 c CASEIH - 1480, 1482, 1680, prior to S/N JJC0047412, 1682; See Note #2 Page 6-10 Top Chaffer - 1680S - 45LT - 4P 1330688C 1 60.00 x 61.75 68 4/6 2/2 45 mm (1-5/8") long 002607 $1,344.07 C-1133 be Top Chaffer - 1680S - 33ST - 4P 1330687C 1 60.00 x 61.75 72 4/6 2/2 33 mm (1-1/8") short 002605 $1,350.43 C-1133 be Top Chaffer - 1680S - 33LT - 4P 1330687C 1 60.00 x 61.75 72 4/6 2/2 33 mm (1-1/8") long 002608 $1,350.43 C-1133 be Bottom Sieve - 1680S - 33ST - 4P 1346915C 1 60.20 x 51.50 55 4/6 1/1 33 mm (1-1/8") short 002606 $1,200.22 C-1133 be Bottom Sieve - 1680S - 33LT - 4P 1347015C 1 60.20 x 51.50 55 4/6 1/1 33 mm (1-1/8") long 002609 $1,368.31 C-1133 be CASEIH - 1420, 1440, 1460, 1640, 1660 Prior S/N JJC0039550; See Note #2 Page 6-10 Top Chaffer - 1660-45LT - 3P 3,5 1330685C 1 45.00 x 61.88 44 3/4 2/2 45 mm (1-5/8") long 002617 $1,126.87 C-1135 c Top Chaffer - 1660-33ST - 3P 5 1330684C 1 45.00 x 61.88 47 3/4 2/2 33 mm (1-1/8") short 002615 $1,244.64 C-1135 c Top Chaffer - 1660-33LT - 3P 5 1330684C 1 45.00 x 61.88 47 3/4 2/2 33 mm (1-1/8") long 002618 $1,244.64 C-1135 c Bottom Sieve - 1660-33ST - 3P 1346914C 1 45.20 x 51.50 43 3/4 1/1 33 mm (1-1/8") short 002616 $1,084.09 C-1135 c Bottom Sieve - 1660-33LT - 3P 1347016C 1 45.20 x 51.50 43 3/4 1/1 33 mm (1-1/8") long 002619 $1,116.68 C-1135 c CASEIH - 1420, 1440, 1460, 1640, 1660 Prior S/N JJC0039550 - Side Hill Option; See Note #2 Page 6-10 Top Chaffer - 1660-33ST - 4P 4 1330684C 1 45.00 x 61.88 59 4/4 2/2 33 mm (1-1/8") short 002697 $1,251.37 C-1133 c Top Chaffer - 1660-45LT - 4P 4 1330685C 1 45.00 x 61.88 55 4/4 2/2 45 mm (1-5/8") long 002698 $1,214.55 C-1133 c Top Chaffer - 1660-33LT - 4P 2,4 1330684C 1 45.00 x 61.88 59 4/4 2/2 33 mm (1-1/8") long 002699 $1,357.60 C-1133 c HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Effective January 1, 2018 6-6

Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual CASEIH - 8010, 8120, 9120, 7230, 8230, 9230; Electric Adjust - Requires two (side by side) New Holland - CR970, 980, 8070, 8090, 9070, 9080, 9090; CX820, 840, 860, 880, 8060, 8070, 8080, 8090 - Electric Adjust - Requires two (side by side) 87109834 & 87109838 30.96 x 56.93 28 2/3 1/1 & 1/2 45 mm (1-5/8") long 002722 $961.69 C-1100 f Top Chaffer - 45LT - 2P Top Chaffer - 33LT - 2P 2 87109830 30.96 x 56.93 29 2/3 1/2 33 mm (1-1/8") long 002723 $1,025.10 C-1100 f Bottom Sieve - 33ST - 2P 84319323 30.96 x 56.93 27 2/3 1/1 33 mm (1-1/8") short 002721 $1,003.94 C-1100 f Bottom Sieve - 33LT - 2P 87109850 30.96 x 56.93 27 2/3 1/1 33 mm (1-1/8") long 002724 $969.12 C-1100 f Bottom Sieve 45LT - 2P N/A 30.96 x 56.93 26 2/3 1/1 45 mm (1-5/8") long 002764 $953.46 C-1100 f CASEIH - 8010, 8120, 9120, 7230, 8230, 9230; Manual Adjust - Requires two (side by side) New Holland - CR970, 980, 8070, 8090, 9070, 9080, 9090; CX820, 840, 860, 880, 8060, 8070, 8080, 8090 - Manual Adjust - Requires two (side by side) Top Chaffer 8010 45LT - 2P 87109834 & 87109838 30.96 x 56.93 28 2/3 1/1 & 1/2 45 mm (1-5/8") long 002622 $917.90 C-1100 Top Chaffer 8010 33ST - 2P 87109830 30.96 x 56.93 29 2/3 1/2 33 mm (1-1/8") short 002620 $981.74 C-1100 Top Chaffer 8010 33LT - 2P 87109830 30.96 x 56.93 29 2/3 1/2 33 mm (1-1/8") long 002623 $981.74 C-1100 Bottom Sieve 8010 33ST - 2P 84319323 30.96 x 56.93 27 2/3 1/1 33 mm (1-1/8") short 002621 $973.10 C-1100 Bottom Sieve 8010 33LT - 2P 87109850 30.96 x 56.93 27 2/3 1/1 33 mm (1-1/8") long 002624 $976.80 C-1100 Bottom Sieve 8010 45LT - 2P N/A 30.96 x 56.93 26 2/3 1/1 45 mm (1-5/8") long 002762 $928.80 C-1100 CASEIH - 7010, 7120; Electric Adjust New Holland - CR920, 940, 960, 6090, 7090, 8080, 9040, 9060, 9065; CX720, 740, 760, 780, 8030, 8040, 8050 - Electric Adjust Top Chaffer - 45LT - 4P 87109832 51.89 x 56.93 53 4/5 1/1 45 mm (1-5/8") long 002727 $1,322.59 C-1104 f Top Chaffer - 45LT - 4P - 2 Adjust 87109836 51.89 x 56.93 53 4/5 2/2 45 mm (1-5/8") long 002740 $1,326.97 C-1107 f Top Chaffer - 33LT - 4P 2 87109828 51.89 x 56.93 57 4/5 1/2 33 mm (1-1/8") long 002728 $1,409.15 C-1104 f Bottom Sieve - 33ST - 4P 84319322 51.89 x 56.93 55 4/5 1/1 33 mm (1-1/8") short 002726 $1,387.09 C-1104 f Bottom Sieve - 33LT - 4P 87109848 51.89 x 56.93 55 4/5 1/1 33 mm (1-1/8") long 002729 $1,392.97 C-1104 f Bottom Sieve - 45LT - 4P N/A 51.89 x 56.93 52 4/5 1/1 45 mm (1-5/8") long 002765 $1,320.79 C-1104 f CASEIH - 7010, 7120 - Manual Adjust New Holland - CR920, 940, 960, 6090, 7090, 8080, 9040, 9060, 9065; CX720, 740, 760, 780, 8030, 8040, 8050 - Manual Adjust Top Chaffer CR960 45LT -4P 87109832 51.89 x 56.93 53 4/5 1/1 45 mm (1-5/8") long 002627 $1,239.34 C-1104 Top Chaffer CR960 33ST - 4P 87109828 51.89 x 56.93 57 4/5 2/2 33 mm (1-1/8") short 002625 $1,363.27 C-1107 Top Chaffer CR960 33LT - 4P 87109828 51.89 x 56.93 57 4/5 2/2 33 mm (1-1/8") long 002628 $1,363.27 C-1107 Bottom Sieve CR960 33ST -4P 84319322 51.89 x 56.93 55 4/5 1/1 33 mm (1-1/8") short 002626 $1,276.02 C-1104 Bottom Sieve CR960 33LT - 4P 87109848 51.89 x 56.93 55 4/5 1/1 33 mm (1-1/8") long 002629 $1,309.90 C-1104 Bottom Sieve CR960 45LT - 4P N/A 51.89 x 56.93 52 4/5 1/1 45 mm (1-5/8") long 002763 $1,215.74 C-1104 New Holland - NH TR 96 and NH TR 99; (Verify measurement before ordering) Top Chaffer TR 96 45LT - 4P 856699 53.94 x 47.88 45 4/5 2/2 45 mm (1-5/8") long 002632 $1,184.47 C-1106 Top Chaffer TR 96 33ST - 4P 771086 53.94 x 47.88 47 4/5 1/1 33 mm (1-1/8") short 002630 $1,229.78 C-1106 Top Chaffer TR 96 33LT - 4P 771086 53.94 x 47.88 47 4/5 1/1 33 mm (1-1/8") long 002633 $1,229.78 C-1106 Bottom Sieve TR 96 33ST - 4P 771089 53.94 x 47.88 47 4/5 1/1 33 mm (1-1/8") short 002631 $1,124.45 C-1104 Bottom Sieve TR 96 33LT - 4P N/A 53.94 x 47.88 47 4/5 1/1 33 mm (1-1/8") long 002634 $1,222.96 C-1104 New Holland - NH TR 96 Extension Top Chaffer Ext. TR 96 33LT - 4P 771088 53.94 x 15.62 26 4/5 1/1 33 mm (1-1/8") long 002635 $1,035.99 C-1104 6-7 Effective January 1, 2018

Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual John Deere - S650, S660, S670, S680, S690 - Electric Adjust; See Note #3 Top Chaffer - S-Series - 45LT - 4P AXE28478 51.89 x 81.00 90 4/4 2/2 45 mm (1-5/8") long 002688 $1,481.40 C-1105 Top Chaffer - S-Series - 33LT - 4P AXE28477 51.89 x 81.00 95 4/4 2/2 33 mm (1-1/8") long 002687 $2,039.86 C-1105 Bottom Sieve - S-Series - 33ST - 4P AXE10852 51.89 x 63.90 80 4/4 1/1 33 mm (1-1/8") short 002686 $1,350.93 C-1105 Bottom Sieve - S-Series - 33LT - 4P AXE20450 51.89 x 63.90 80 4/4 1/1 33 mm (1-1/8") long 002642 $1,421.53 C-1105 Bottom Sieve - S Series - 45LT - 4P N/A 51.89 x 63.90 77 4/4 1/1 45 mm (1-5/8") long 002774 $1,282.28 C-1105 John Deere - STS 9650, 9660, 9670, 9750, 9760, 9770, 9860, 9870 - Electric Adjust (In Cab) Top Chaffer - STS - 45LT - 4P AH212245 51.89 x 63.30 80 4/4 1/1 45 mm (1-5/8") long 002647 $1,248.84 C-1105 Top Chaffer - STS - 33ST - 4P AH212239 51.89 x 63.30 85 4/4 1/1 33 mm (1-1/8") short 002645 $1,380.18 C-1105 Top Chaffer - STS - 33LT - 4P AH212239 51.89 x 63.30 85 4/4 1/1 33 mm (1-1/8") long 002648 $1,380.18 C-1105 Bottom Sieve - STS - 33ST - 4P AH212241 51.89 x 54.90 75 4/4 1/1 33 mm (1-1/8") short 002646 $1,219.74 C-1105 Bottom Sieve - STS - 33LT - 4P AH212247 51.89 x 54.90 75 4/4 1/1 33 mm (1-1/8") long 002649 $1,275.85 C-1105 Bottom Sieve - STS - 45LT - 4P N/A 51.89 x 54.90 71 4/4 1/1 45 mm (1-5/8") long 002760 $1,203.38 C-1105 John Deere - STS 9650, 9660, 9670, 9750, 9760, 9770, 9860 - Manual Adjust Top Chaffer - STS - 45LT - 4P AH212248 51.89 x 63.30 78 4/4 1/1 45 mm (1-5/8") long 002652 $1,232.45 C-1105 b Top Chaffer - STS - 33ST - 4P AH211936 51.89 x 63.30 83 4/4 1/1 33 mm (1-1/8") short 002650 $1,372.16 C-1105 b Top Chaffer - STS - 33LT - 4P AH211936 51.89 x 63.30 83 4/4 1/1 33 mm (1-1/8") long 002653 $1,372.16 C-1105 b Bottom Sieve - STS - 33ST - 4P AH211944 51.89 x 54.90 73 4/4 1/1 33 mm (1-1/8") short 002651 $1,212.06 C-1105 b Bottom Sieve - STS - 33LT - 4P AH212249 51.89 x 54.90 73 4/4 1/1 33 mm (1-1/8") long 002654 $1,267.84 C-1105 b Bottom Sieve - STS - 45LT - 4P N/A 51.89 x 54.90 69 4/4 1/1 45 mm (1-5/8") long 002761 $1,165.42 C-1105 b John Deere - 9600, 9610, 9650, 9660; See Note #1 Top Chaffer 9600 45LT - 2P N//A 31.10 x 35.71 25 2/3 1/1 45 mm (1-5/8") long 002597 $802.49 C-1101 AH132784/ Top Chaffer 9600 33ST - 2P AH149552, 50 31.10 x 35.71 27 2/3 1/1 33 mm (1-1/8") short 002595 $874.81 C-1101 AH132784/ Top Chaffer 9600 33LT - 2P AH149552, 50 31.10 x 35.71 27 2/3 1/1 33 mm (1-1/8") long 002598 $874.81 C-1101 AH130159/ Bottom Sieve 9600 33ST - 3P - RH AH149556 31.10 x 48.70 36 3/3 1/1 33 mm (1-1/8") short 002596 $997.06 C-1102 a AH130159/ Bottom Sieve 9600 33ST - 3P - LH AH149557 31.10 x 48.70 36 3/3 1/1 33 mm (1-1/8") short 002592 $997.06 C-1102 a Bottom Sieve 9600 33LT - 3P - RH N/A 31.10 x 48.70 36 3/3 1/1 33 mm (1-1/8") long 002599 $1,012.55 C-1102 a Bottom Sieve 9600 33LT - 3P - LH N/A 31.10 x 48.70 36 3/3 1/1 33 mm (1-1/8") long 002593 $1,012.55 C-1102 a John Deere - 94-9500 Incl. 10, 50, 60; See Note #1 Page 6-10 Top Chaffer 9500 45LT - 2P N/A 25.67 x 35.71 21 2/2 1/1 45 mm (1-5/8") long 002587 $733.38 C-1101 AH132785/ Top Chaffer 9500 33ST - 2P AH149553, 51 25.67 x 35.71 22 2/2 1/1 33 mm (1-1/8") short 002585 $765.33 C-1101 AH132785/ Top Chaffer 9500 33LT - 2P AH149553, 51 25.67 x 35.71 22 2/2 1/1 33 mm (1-1/8") long 002588 $765.33 C-1101 AH130160/ Bottom Sieve 9500 33ST - 2P - RH AH149558 25.67 x 48.70 30 2/2 1/1 33 mm (1-1/8") short 002586 $893.50 C-1101 a AH130160/ Bottom Sieve 9500 33ST - 2P - LH AH149559 25.67 x 48.70 30 2/3 1/1 33 mm (1-1/8") short 002590 $893.50 C-1101 a Bottom Sieve 9500 33LT - 2P - RH N/A 25.67 x 48.70 30 2/2 1/1 33 mm (1-1/8") long 002589 $896.88 C-1101 a Bottom Sieve 9500 33LT - 2P - LH N/A 25.67 x 48.70 30 2/3 1/1 33 mm (1-1/8") long 002591 $896.88 C-1101 a Effective January 1, 2018 6-8

Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Description OEM Part No. Frame Size Wt. Panels Adjustments Row-to-Row Tooth Gateway 2018 Parts Replc. # / Orig. # Replc. # / Orig. # Part No. List Price Manual John Deere - 8820 Titan II Top Chaffer 8820 Titan II 45LT - 4P AH130385 63.73 x 67.62 86 4/7 2/2 45 mm (1-5/8") long 002672 $1,644.57 C-1107 Top Chaffer 8820 Titan II 33ST - 4P AH130384 63.73 x 67.62 92 4/7 2/2 33 mm (1-1/8") short 002670 $1,880.44 C-1107 Top Chaffer 8820 Titan II 33LT - 4P AH130384 63.73 x 67.62 92 4/7 2/2 33 mm (1-1/8") long 002673 $1,880.44 C-1107 Bottom Sieve 8820 Titan II 33ST - 4P AH130391 63.58 x 52.95 83 4/6 1/2 33 mm (1-1/8") short 002671 $1,529.17 C-1104 Bottom Sieve 8820 Titan II 33LT - 4P AH130392 63.58 x 52.95 83 4/6 1/2 33 mm (1-1/8") long 002674 $1,396.01 C-1104 John Deere - 7720 Titan II Top Chaffer 7720 Titan II 45LT - 4P AH130383 52.87 x 66.88 71 4/6 2/2 45 mm (1-5/8") long 002677 $1,380.58 C-1107 Top Chaffer 7720 Titan II 33ST - 4P AH130381 52.87 x 66.88 76 4/6 2/2 33 mm (1-1/8") short 002675 $1,487.21 C-1107 Top Chaffer 7720 Titan II 33LT - 4P AH130381 52.87 x 66.88 76 4/6 2/2 33 mm (1-1/8") long 002678 $1,487.21 C-1107 Bottom Sieve 7720 Titan II 33ST - 4P AH130389 52.75 x 52.45 61 4/5 1/1 33 mm (1-1/8") short 002676 $1,230.51 C-1104 Bottom Sieve 7720 Titan II 33LT - 4P AH130390 52.75 x 52.45 61 4/5 1/1 33 mm (1-1/8") long 002679 $1,235.64 C-1104 John Deere - 6620 Titan II Top Chaffer 6620 Titan II 45LT - 3P AH130379 42.01 x 66.88 54 3/5 2/2 45 mm (1-5/8") long 002682 $1,239.00 C-1103 Top Chaffer 6620 Titan II 33ST - 3P AH130378 42.01 x 66.88 58 3/5 2/2 33 mm (1-1/8") short 002680 $1,324.99 C-1103 Top Chaffer 6620 Titan II 33LT - 3P AH130378 42.01 x 66.88 58 3/5 2/2 33 mm (1-1/8") long 002683 $1,324.99 C-1103 Bottom Sieve 6620 Titan II 33ST - 3P AH130387 41.87 x 52.45 50 3/4 1/1 33 mm (1-1/8") short 002681 $1,043.52 C-1102 Bottom Sieve 6620 Titan II 33LT - 3P AH130388 41.87 x 52.45 50 3/4 1/1 33 mm (1-1/8") long 002684 $1,127.80 C-1102 John Deere - 8820 S/N 610700 and Prior Top Chaffer - 8820-45LT - 4P AH97998 63.73 x 61.62 80 4/7 2/2 45 mm (1-5/8") long 002657 $1,580.54 C-1107 Top Chaffer - 8820-33ST - 4P AH96770 63.73 x 61.62 85 4/7 2/2 33 mm (1-1/8") short 002655 $1,794.67 C-1107 Top Chaffer - 8820-33LT - 4P AH96770 63.73 x 61.62 85 4/7 2/2 33 mm (1-1/8") long 002658 $1,794.67 C-1107 Bottom Sieve - 8820-33ST - 4P AH96772 63.58 x 46.83 68 4/6 1/2 33 mm (1-1/8") short 002656 $1,421.56 C-1104 Bottom Sieve - 8820-33LT - 4P AH98000 63.58 x 46.83 68 4/6 1/2 33 mm (1-1/8") long 002659 $1,334.37 C-1104 John Deere - 7700, 7701, 7720, 7721 Prior To S/N 610500 Top Chaffer - 7720-45LT - 4P AH106771 52.87 x 60.88 66 4/6 2/2 45 mm (1-5/8") long 002662 $1,275.49 C-1107 Top Chaffer - 7720-33ST - 4P AH106770 52.87 x 60.88 70 4/6 2/2 33 mm (1-1/8") short 002660 $1,416.57 C-1107 Top Chaffer - 7720-33LT - 4P AH106770 52.87 x 60.88 70 4/6 2/2 33 mm (1-1/8") long 002663 $1,416.57 C-1107 Bottom Sieve - 7720-33ST - 4P AH96771 52.75 x 46.83 55 4/5 1/1 33 mm (1-1/8") short 002661 $1,182.45 C-1104 Bottom Sieve - 7720-33LT - 4P AH98001 52.75 x 46.83 55 4/5 1/1 33 mm (1-1/8") long 002664 $1,232.45 C-1104 John Deere - 6600, 6601, 6620, 6621, 6622 Prior to S/N 610700 Top Chaffer - 6620-45LT - 3P AH99749 42.01 x 60.76 47 3/5 2/2 45 mm (1-5/8") long 002667 $1,098.01 C-1103 Top Chaffer - 6620-33ST - 3P AH99748 42.01 x 60.76 51 3/5 2/2 33 mm (1-1/8") short 002665 $1,262.14 C-1103 Top Chaffer - 6620-33LT - 3P AH99748 42.01 x 60.76 51 3/5 2/2 33 mm (1-1/8") long 002668 $1,262.14 C-1103 Bottom Sieve - 6620-33ST - 3P AH85352 41.90 x 46.08 37 3/4 1/1 33 mm (1-1/8") short 002666 $1,032.94 C-1102 Bottom Sieve - 6620-33LT - 3P AH98002 41.90 x 46.08 37 3/4 1/1 33 mm (1-1/8") long 002669 $1,036.59 C-1102 Divider Riser Kit - Optional 12 clips, 30 rivets 002641 $42.44 C-1098 6-9 Effective January 1, 2018

Gateway Durable Plastic Sieves and Chaffers OEM Replacement Parts Note: If a combine model is not listed, contact HCC, Inc. to determine if we have a Gateway unit that fi ts the combine model requested. Note: Not recommended for rice application. Note: Verify measurements before ordering. Note: Remote adjust is only available on part numbers specifi ed. Note #1 - Must order two chaffers or both LH (left-hand) and RH (right-hand) sieves to replace units. HCC does not recommend running a Gateway side by side with a steel frame. Note #2 - Gateway unit will replace all Case base part numbers, regardless of revision level (ie. C1, C2, etc.). Note #3 - JD S650-2016 Series Combines on the bottom sieve are 10" longer and we do not carry this sieve in a Gateway. 1 Not all OEM part numbers are shown. Use 45 LT to replace either 1-5/8 chaffers or 1-5/8 deep-tooth chaffers. Contact HCC, inc. with any questions. 2 HCC is now offereing the top chaffer long tooth in a short tooth confi guration for all models indicated. The price for the short tooth will be the same as the price for the long tooth 33 mm (1-1/8 ). Contact HCC, inc. for part number and availability. 3 Divider risers may not line up. Side adjuster may require modifi cation to work with unit. 4 For use in high yielding corn or if combine has hillside dividers installed on the grain pan. 5 For use in small grains. 6 Internal modifi cation to shoe cross brace required due to increased height of Gateway sieve. e Electric Adjustment m Manual Adjustment All Parts Manuals - Installation Guides are found on HCC Website at www.hccinc.com Gateway Parts are offered -- Call HCC for Pricing and Availablity INSTALLATION GUIDES a) C-1124 - Installation Instruction JD 900 & 10 Series Extension b) C-1125 - Installation Insturction Deere STS GW c) C-1126 - Installation Instruction Case GW d) C-1163 - Combine Shoe Modifi cation for 9690 & 9790 MF e) C-1164 - Supplemental GW Instgallation Guide for Case Combines f) C-1181 - Installation Guide CaseIH, New Holand, CR, CX Machines g) C-1182 - Installation Guide for CaseIH 88 Series HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Effective January 1, 2018 6-10

HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Gateway Bulk Parts Price List Pkg P/N QTY Description 2018 List Price Picture 709242 1 Service Pkg - Female Connector (100 Count of 409000) $269.68 709243 1 Service Pkg - Male Connector (100 Count of 409001) $269.68 709244 1 Service Pkg - Center Connector Long (100 Count of 409002) $168.24 709245 1 Service Pkg - Center Connector Short (100 Count of 409003) $168.24 709246 1 Service Pkg - RH End Connector (100 Count of 409004) $256.06 709247 1 Service Pkg - LH End Connector (100 Count of 409005) $258.34 709248 1 Service Pkg - Push Nut (200 Count 212366) $105.14 6-11 Effective January 1, 2018

HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Gateway Bulk Parts Price List Continued Pkg P/N QTY Description 2018 List Price Picture 709254 1 Service Pkg - Short Tooth Slat (300 Count of 406001) $2,091.01 709255 1 Service Pkg - Long Tooth Slat (250 Count of 406002) $1,887.58 Effective January 1, 2018 6-12

HCC, inc., the maker of virtually all original equipment sieves and chaffers. As a result, fit and function of replacement parts is guaranteed to meet or exceed original equipment standards. Gateway Sieve and Chaffer Service Package Price List Connectors Kit 2018 Part No. Description List Price 709024 Service Package - Package Connectors with Adjusting Arm $ 44.00 5 of 212366 Metal Push Nuts for Crank Arm.250 Stud Diameter 5 of 409000 Axle Connectors - Female 5 of 409001 Axle Connectors - Male 5 of 409002 Center Connectors - Crank Arm - Long 709025 Service Package - Package Plastic Connectors without Adjustment Arm $ 44.00 5 of 409000 Axle Connectors - Female 5 of 409001 Axle Connectors - Male 5 of 409003 Center Connectors - No Crank Arm - Short 709026 Service Package - Package End Connectors - LH and RH $ 33.69 5 of 409004 RH End Cranks 5 of 409005 LH End Cranks GW Slat Kits - 10 Count 2018 Part No. Description List Price 709027 Service Package - GW Sieve Short Tooth Slat 28" Long (10 Count of 406001) ** $ 80.62 709028 Service Package - GW Chaffer Long Tooth Slat 28" Long (10 Count of 406002) ** $ 82.12 709048 Service Package - GW Sieve Short Tooth Slat 24" Long (10 Count of 406003) ** $ 117.45 709049 Service Package - GW Sieve Long Tooth Slat 24" Long (10 Count of 406004) ** $ 123.25 709050 Service Package - GW Chaffer Flat Slat 28" Long (10 Count of 406006) ** $ 82.12 709051 Service Package - GW Sieve Flat Slat 28" Long (10 Count of 406005) ** $ 85.72 Note: Left and Right-Hand (LH/RH) is as viewed from the driver s seat. Note: The Crank Arm/Male Axle Connector/Female Axle Connector components should be replaced as an entire assembly to ensure proper fi tting of these mating components. Note: All Service Packages include a instruction manual. ** All slat service packages have enough material length to make 20 slats, except where noted in the description. An existing slat can be used as a template. 6-13 Effective January 1, 2018

NOTES Effective January 1, 2018 6-14

Reels HCC Reels for Combines and Swathers HCC Reels HCC Reels excel in moving crops into the combine. New design concepts effectively divide, lift, and feed standing or down crops, including soybeans, canola, wheat, lentils, irrigated crops, rice, and milo. Dependability and lower maintenance result from fewer parts and tough polymer tines made with exclusive material. HCC Reel users enjoy advantages such as 35-40% improved visibility, up to 25% less weight to decrease load on harvesting equipment, and superior bat strength versus sheetmetal or aluminum. The HCC Reel provides lower cost, more effective crop movement, and less down time for combine and swather customers world-wide. HCC Level II Reel Components The Reel Bundle consists of the center tube and bat tubes with tines attached. The Reel Attaching Packages consists of RH & LH Brackets, Drive Shafts, End Shields, Reel Arms for mounting Bat Tubes to Center Tube, Reel Arm Bearings, and all Hardware for assembly Level II Reels Level II bat tube reels were introduced in 1999. 8 center tubes for reels 15 to 30 (are as noted) 10 center tubes for reels (are as noted) ML 5 and ML 6 Bat Reels ML (Metric Length) bat tube reels were introduced in 1990 Real Bundles and Att. Packages are no longer offered. What was offered in a Reel Bundle and Att. Pkg will now only be available as Individual Service Parts, located in the Miscellaneous Service Parts Section. Bat Tubes will NOT be assembled with the Tines. 7-1 Effective January 1, 2018